A best seller! These front camber/caster kits simply replace the upper strut mounts. Adjust simply, there is no jacking or disassembly necessary! These plates provide up to three degrees of negative camber. No drilling, slotting or welding!
Available for rear also! Perfect for lowered cars that need to dial out negative camber to preserve tires- especially lowered E30, E24, E28's. Perfect for cars with wider tires to dial in some negative camber to allow for more fender clearance. Also perfect for track cars, easily dial in toe and camber for the track for increased handling.
Available for the following BMWs: (click icon to change BMW)
KMAC E24, E28, E30, E34, Front Camber/Caster Plates (pair)
(more info) This Stage I kit is recommend for street / semi-race use, and daily driven vehicles. Manufactured from steel, it includes urethane bushings and ball race thrust bearings for long life, commuter use. Adjust easily – there is no jacking or disassembly necessary! These plates provide up to three degrees of negative camber. Perfect for driving schools.
This item fits the following BMWs:
1984-1991 E30 BMW 318i 318is 318ic 325e 325es 325i 325ic 325is 325ix M3
1982-1988 E28 BMW 528e 533i 535i 535is M5
1993-1995 E34 BMW 525i
1982-1989 E24 BMW 633csi 635csi M6
Part #: 193316
Price: $314.95 (USD)
KMAC Front Camber/Caster Plates (Pair) - Stage 2 (Street/Race) - E30 E34 E28 E24
(more info) This Stage 2 kit is recommend for street / race use. Manufactured from aluminum alloy, it includes a pillowball and urethane bushings. These weigh in at only 2.2 lbs (1 kilo), so they are lightweight. Adjustments can be made very easily, with NO JACKING or disassembly necessary! These plates provide up to three degrees of negative camber. Great for driving schools and some race applications.
This kit fits the following BMWs:
1984-1991 E30 BMW 318i 318is 318ic 325e 325es 325i 325ic 325is 325ix M3
1982-1988 E28 BMW 528e 533i 535i 535is M5
1993-1995 E34 BMW 525i
1982-1989 E24 BMW 633csi 635csi M6
Part #: 193316K2
Price: $339.95 (USD)
KMAC Front Camber/Caster Plates (Pair) - Stage 3 (Full Race) - E30 E34 E28 E24
(more info) This Stage 3 kit is recommend for race & track use only. Manufactured from aluminum alloy, it includes a pillowball which allows for NO FLEX, and makes for quicker response. These weigh in at only 2.2 lbs (1 kilo), so they are lightweight. Adjustments can be made very easily, with NO JACKING or disassembly necessary! These plates provide up to three degrees of negative camber. Not for street use.
This item fits the following BMWs:
1984-1991 E30 BMW 318i 318is 318ic 325e 325es 325i 325ic 325is 325ix M3
1982-1988 E28 BMW 528e 533i 535i 535is M5
1993-1995 E34 BMW 525i
1982-1989 E24 BMW 633csi 635csi M6
Part #: 193316K3
Price: $339.95 (USD)
Turner Motorsport E30/E24/E28 Fixed Front Camber Plates (pair)
(more info) These "fixed" steel camber plates (Legal for J stock) for your E30/E24/E28 will add 3/4 degree of negative camber and will reduce understeer during hard cornering and save the outside edge of your tire !These plates mount above the upper strut bearing and do not require removal of the bearing to install. Combine these with our offset upper strut bearings for even more negative camber. A must for J Stock!!!
Part #: TSU3080459
Price: $139.95 (USD)
Vorshlag Spec E30 Front Camber Plates
(more info) Looking for a quality adjustable front camber kit for your Spec E30 racecar? Vorshlag has stepped up and designed a camber kit especially for the SpecE30 rules. These camber plates allow adjustment of camber and caster separately, allowing you to fine-tune your handling for the track you're running.
The Vorshlag design is among the best in the industry thanks to 'over-engineering' of critical components. The center spherical bearing is oversized which makes it better for withstanding the forces and wear normally seen on the racetrack. Each piece is anodized or plated for maximum corrosion reistance.
The Vorshlag SE30 camber kit comes with the camber plates, lower spool adapter, and upper deep-set nuts. Per NASA rules, you must re-use the stock/OE spring plate. Note that Bilstein front strut inserts have used two different thread types - 12x1.25 or 12x1.50. We recommend checking the struts on both sides of the car to ensure you get the correct nuts. If you're unsure, or want both on hand, select the 'Send me both' option below.
Note: this is intended for Spec E30 only because it must conform to the NASA SE30 rules. If you are using another suspension with an OE-style spring, or the SE30 suspension but not racing in that class, let us know and we can put together a different kit for you.
This item fits the following BMWs:
1984-1991 Spec E30 BMW 325e 325es 325i 325is
KMAC / Turner Camber Kits / Caster Plates
These "fixed" steel camber plates (Legal for J stock) for your E30/E24/E28 will add 3/4 degree of negative camber and will reduce understeer during hard cornering and save the outside edge of your tire !These plates mount above the upper strut bearing and do not require removal of the bearing to install. Combine these with our offset upper strut bearings for even more negative camber. A must for J Stock!!!
