Contact YouTube Blog Twitter facebook Turner Motorsport on Instagram
1-800-280-6966
Login   |

0 item(s) in your Shopping Cart
Language:
Currency:
VAT Mode:
Get notified about money saving
specials & deals for your BMW
enter your email address
  • 18 years of BMW Tuning.
  • Award winning service.
  • 1,000's of parts in stock.
  • Quality BMW Parts only.
  • Hassle-free returns.

  • Find us on Facebook


    BMW E34 Gaskets, Gasket Sets, Seals, & O-Rings

    Gaskets are key to a properly running and clean engine. They obviously prevent fluid leaks but they're also critical in keeping air either in or out... Air leaks after the air flow meter, also known as vaccum leaks, can induce lean running conditions, fault codes, and poor running conditions. Other seals and gaskets are designed to keep air in. With the sensitivity of OBD systems, leaks will lead to fault codes very quickly which can be tough to diagnose and prevent you from passing state inspections.

    We insist on Original BMW or OEM gaskets whenever possible.
    You're currently viewing parts for your (E34) 5-Series 1989-1995. Reset your chassis
    For accurate results, specify your year and model below.
    Rebuilding the M10 4 cylinder engine on your M30 6 cylinder engine? Then you'll need this bottom end gasket set manufactured by Victor Reinz, This kit includes the all the gaskets and seals on the engine block below the head gasket, including oil pan gasket, front crank seal, timing case gaskets/seals, water pump gasket etc.

    This item fits the following BMWs:
    1989-1992 E34 BMW 535i
    6/1987-1989 E24 BMW 635csi
    1988-1992 E32 BMW 735i 735il
    Part #: 11119059234
    Price: $71.95 (USD) 
    Quantity:   
    Any work on the engine while it's out of the car is going to require new gaskets. You can save time and money with this complete crankcase gasket set. It includes everything you may need when pulling and re-sealing the block on the M20 engine.

    This set of gaskets is a both a time and money saver. It includes all of the commonly replaced gaskets, seals, and o-rings when performing this overhaul. Having these on hand instead of chasing them down at the last minute will save you time, money, and frustration. With this area of the engine apart you're going to want or need to replace these items anyway to ensure it's free of fluid and vacuum leaks. This is especially important because some states have very strict emissions regulations and vacuum and oil leaks can lead to failed inspections tests. On newer cars this can also create issues in the on-board diagnostics system. Even if you're not pulling the head this set includes so many valuable parts you'll want to keep this on hand to use for spares.

    Complete Parts List
    (click to expand)
    BMW p/n Qty Description
    07119963073 1 block screw plug seal ring
    07119963151 1 drain plug seal ring
    07119963200 1 coolant drain plug seal ring
    temp sensor seal
    07119963355 1 gasket ring
    11121255305 1 engine block cover gasket
    (may only apply to Euro models)
    11121285609 1 front camshaft bore seal
    11131730234 1 oil pan gasket
    11141432240 1 rear main seal cover gasket
    11141720903 1 front timing cover gasket
    11142249532 1 front crankshaft seal
    11142249533 1 rear main seal
    11511722677 1 water pump gasket
    12111363190 1 block cover gasket ring
    12611277129 1 oil level sender o-ring
    (may only apply to Euro models)
    13631264271 1 o-ring (Euro models only)


    This item fits the following BMWs:
    1985-1992 E30 BMW 325e 325es 325i 325ic 325is
    1982-1988 E28 BMW 528e
    1989-1990 E34 BMW 525i
    Part #: 11111730875
    Price: $58.97 (USD) 
    Quantity:   
    This is a set of OEM replacement gaskets that re-seals the bottom-end and front and rear ends of the crankcase. This covers gaskets on the block, oil filter housing, front timing cover, and rear main seal and cover. For top-end and cylinder head gaskets see our head gasket sets.

    This set of gaskets is a both a time and money saver. It includes all of the commonly replaced gaskets, seals, and o-rings when performing this overhaul. Having these on hand instead of chasing them down at the last minute will save you time, money, and frustration. With this area of the engine apart you're going to want or need to replace these items anyway to ensure it's free of fluid and vacuum leaks. This is especially important because some states have very strict emissions regulations and vacuum and oil leaks can lead to failed inspections tests. On newer cars this can also create issues in the on-board diagnostics system. Even if you're not pulling the head this set includes so many valuable parts you'll want to keep this on hand to use for spares.

    Complete Parts List
    (click to expand)
    BMW p/n Qty Description
    07119963080 1 gasket ring for oil filter bolt
    07119963151 1 oil drain plug gasket ring, A12x17
    07119963200 1 block coolant drain gasket ring, A14x18
    11131437237 1 oil pan gasket
    11141432240 1 rear main seal plate gasket
    11141720638 1 front timing cover gasket
    11141720639 1 front timing cover gasket
    11142249532 1 front crankshaft shaft seal, 48x65x10
    11142249533 1 rear main seal, 90x110x12
    11411703947 1 oil pump pipe gasket
    11411722837 1 oil pump control valve o-ring, 17.0x1.8
    11421711076 1 tiny o-ring for oil filter bolt
    11421719855 1 oil filter housing gasket
    11421741000 1 large o-ring for oil filter cap
    11431287541 1 oil dipstick tube o-ring (to oil pan), 14.5x3
    11431717666 2 oil dipstick tube o-ring (dipstick handle), 9x2.2
    11511711484 1 water pump o-ring, 68x5
    12611277129 1 oil pan access panel gasket, 40x4
    32411093596 2 VAN0S line to oil filter housing gasket ring, A14x20


    This item fits the following BMWs:
    1993-1995 E36 BMW 325i 325is 325ic M3
    1993-1995 E34 BMW 525i
    Part #: 11119064460
    Price: $89.95 (USD) 
    Quantity:   
    This is the o-ring used for most BMW camshaft sensors and crankshaft sensors. Although most sensors that we sell come with this o-ring at no charge, they may be the source of oil or fluid leaks. Simply replacing the o-ring, rather than replacing the whole sensor, is preferred. Fits with many BMW models and multiple cam, crank, and pulse generator sensors.

    Sold per o-ring.
    Part #: 12141748398
    Price: $1.95 (USD) 
    Quantity:   
    This is the front crankshaft seal (48x65x10) for most BMW's with M20, M60, M62 engines.

    This item fits the following BMWs:
    1984-1991 E30 BMW 325e 325es 325i 325ic 325is 325ix
    1982-1988 E28 BMW 528e
    1989-1990 E34 BMW 525i
    1997-2003 E39 BMW 540i M5
    E32 BMW 740i 740il
    1995-2001 E38 BMW 740i 740il
    1990-1999 E31 BMW 840i 840ci
    2000-2003 E53 BMW X5 4.4i X5 4.6is
    1998-2002 Z3 BMW M Roadster M Coupe
    2000-2003 E52 BMW Z8 Roadster
    Part #: 11141275466
    Price: $6.95 (USD) 
    Quantity:   
    This is the front crankshaft seal (48x65x10) for most BMW's with M50, M52, M54 S54 engines.

    This item fits the following BMWs:
    1992-1998 E36 BMW 323is 323ic 325i 325is 325ic 328i 328is 328ic
    1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
    1991-1995 E34 BMW 525i
    1997-2003 E39 BMW 525i 528i 530i
    2004-2005 E60 BMW 525i 530i
    2004-2006 E83 BMW X3 2.5i X3 3.0i
    2000-2006 E53 BMW X5 3.0i
    1997-2002 Z3 BMW Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i
    2003-2006 E85 BMW Z4 2.5i Z4 3.0I
    2006-2008 E85 BMW Z4 M Roadster M Coupe
    Part #: 11142249532
    Price: $14.95 (USD) 
    Quantity:   
    Standard replacement head gasket for M50 and M52 engines. Fits 1992-1995 325i/is & 525i, 1996-1999 328i/is & 323is (E36), 1997-1998 528i (E39) and Z3 2.8.
    Part #: 11121726617
    Price: $54.95 (USD) 
    Quantity:   
    Replacement Head Gasket Set that includes nearly everything you would want to replace when overhauling the head on an M30 engine.

    This set of gaskets is a both a time and money saver. It includes all of the commonly replaced gaskets, seals, and o-rings when performing this overhaul. Having these on hand instead of chasing them down at the last minute will save you time, money, and frustration. With this area of the engine apart you're going to want or need to replace these items anyway to ensure it's free of fluid and vacuum leaks. This is especially important because some states have very strict emissions regulations and vacuum and oil leaks can lead to failed inspections tests. On newer cars this can also create issues in the on-board diagnostics system. Even if you're not pulling the head this set includes so many valuable parts you'll want to keep this on hand to use for spares.

    Complete Parts List
    (click to expand)
    BMW p/n Qty Description
    07119963042 1 distributor rotor o-ring
    07119963130 2 oil pressure switch o-ring,
    coolant temp sensor o-ring
    07119963200 2 coolant temp sensor o-ring,
    block plug o-ring
    07119963355 1 timing chain tensioner o-ring
    11121726725 1 rear cover plate gasket
    11121730223 1 head gasket
    11121730231 1 valve cover gasket
    11141271415 1 front camshaft cover seal
    11141726727 1 upper timing/camshaft cover gasket,
    right
    11141726729 1 upper timing/camshaft cover gasket,
    left
    11151312176 1 rear camshaft cover gasket
    11349059170 1 valve stem seal set
    11421252343 4 cylinder head oil tube o-ring
    11531265084 1 thermostat o-ring
    11531722690 1 thermostat housing gasket
    11611726016 6 intake manifold port gasket
    11621723656 2 exhaust manifold heat shield
    12110002735 1 rear head cover bolt o-ring
    13541270894 1 throttle body gasket


    This item fits the following BMWs:
    1989-1993 E34 BMW 535i
    6/1987-1989 E24 BMW 635csi
    1989-1992 E32 BMW 735i 735il
    Part #: 11129059238
    Price: $114.95 (USD) 
    This intake manifold gasket fits BMW E36 325i 325is 325ic M3 3.0 liter 1992-1995 - E34 525i 525i wagon 1991-1995. These are sold individually - a total of 6 are on the car.

    This item fits the following BMWs:
    1992-1995 E36 BMW 325i 325is 325ic M3 3.0l
    1991-1995 E34 BMW 525i 525i Wagon
    Part #: 11611717259
    Price: $5.95 (USD) 
    Quantity:   
    This intake manifold gasket fits BMW E34 530i 540i - E39 540i - E32 740i 740il - E38 740i 740il - E31 840i 840ci - E53 X5 4.4i 4.6is thru 2003. The V8 often develop a leaking valley pan gasket that requires replacing these intake manifold gaskets. These are sold individually. There are a total of 4 on the car.

    This item fits the following BMWs:
    1993-1995 E34 BMW 530i 540i
    1997-2003 E39 BMW 540i
    1993-1994 E32 BMW 740i 740il
    1995-2001 E38 BMW 740i 740il
    1993-1999 E31 BMW 840i 840ci
    2000-2003 E53 BMW X5 4.4i X5 4.6is
    Part #: 11611433328
    Price: $16.95 (USD) 
    Quantity:   
    This lower oil pan gasket fits BMW E34 530i 540i E39 540i E38 740i 740il E31 840i 840ci with M60 or M62 engine.

    This item fits the following BMWs:
    1992-1995 E34 BMW 530i 540i
    1997-2003 E39 BMW 540i
    1995-2001 E38 BMW 740i 740il
    1992-1998 E31 BMW 840i 840ci
    Part #: 11131436324
    Price: $25.95 (USD) 
    Quantity:   
    This kit includes the 3 gaskets for the front lower engine timing chain case for BMW's with the M60 or M62 V-8 engine. Replacing these components is essential when replacing any timing components on your M60/M62 engine.

    This item fits the following BMWs:
    1989-1995 E34 BMW 530i 540i
    1997-2003 E39 BMW 540i
    1988-1994 E32 BMW 740i 740il
    1995-2001 E38 BMW 740i 740il
    1990-1999 E31 BMW 840i 840ci
    2000-2003 E52 BMW Z8 Alpina Roadster
    Part #: 11141436978
    Price: $19.95 (USD) 
    Quantity:   
    Lost your oil filler cap? This oil filler cap replaces the stock cap in the valve cover.

    This item fits the following BMWs:
    1990-1991 E30 BMW 318i 318is 318ic with M42 Engine
    1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic
    1999-2005 E46 BMW 323i 323ci 325xi 328i 328ci 330i 330ci 330xi M3
    2001-2005 E46 BMW 325i 325ci - only with M54 engine
    2009+ E90 BMW 335d
    1991-1995 E34 BMW 525i 530i 535i 540i
    1997-2003 E39 BMW 525i 528i 530i 540i M5
    1997-2003 E39 BMW 525i 528i 530i 540i M5
    2004-2005 E60 BMW 525i 530i 545i
    2006-2010 E60 BMW 545i 550i
    2004+ E63 BMW 645ci 650i
    1992-1994 E32 BMW 740i 740il 750il
    1995-2001 E38 BMW 740i 740il 750il
    2002-2008 E65 BMW 745i 745li 750i 750li 760i 760li
    1990-1999 E31 BMW 840i 840ci 850i 850ci 850csi
    2004-2006 E83 BMW X3 2.5i X3 3.0i
    2000-2006 E53 BMW X5 3.0i X5 4.4i X5 4.6is X5 4.8is
    2007+ E70 BMW X5 4.8i X5 xDrive48i
    1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M coupe M Roadster
    2003-2005 Z4 BMW Z4 2.5i Z4 3.0i
    2000-2003 E52 BMW Z8
    Part #: 11127509328
    Price: $11.95 (USD) 
    Quantity:   
    This oil filler cap fits BMW 2002 E30 318i thru 85, 325e 325i thru 91 E28 528e 533i 535i M5 thru 1988 E34 525i thru 90, 535i M5 thru 93 E24 633csi 635csi M6 E23 733i 735i E32 735i 735il

    This item fits the following BMWs:
    1967-1976 2002 BMW 2002 2002tii
    1977-1983 E21 BMW 320i 323i
    1984-1985 E30 BMW 318i
    1984-1991 E30 BMW 325e 325es 325i 325is 325ic 325ix M3
    1982-1988 E28 BMW 528e 533i 535i 535is M5
    1989-1990 E34 BMW 525i
    1989-1993 E34 BMW 535i M5
    1977-1989 E24 BMW 633csi 635csi M6
    1977-1987 E23 BMW 733i 735i
    1988-1994 E32 BMW 735i 735il
    Part #: 11121716993
    Price: $4.20 (USD) 
    Quantity:   
    This is the replacement for the troublesome oil filter profile gasket on the M50, S50US, M52, S52, M52TU, M54, and S54 engines. The housing is separate from the engine block and in between there is this small profile gasket. The gasket shrinks over time which allows oil to seep out. In our own service shop, it's one of the most common service jobs we perform.

    One of the other common leak points is the VAN0S oil line and its seals. Since the line comes out with the oil filter housing anyway you might as well replace the line itself or at least the seals.

    On S54 engines (E46 M3, MZ3, Z4 M) there is a flanged head bolt going into the cylinder head, behind the thermostat cover. This holds the left side timing chain guide rail in place and if it's loose or falls out you could have a very serious engine failure to deal with. Make sure to check this bolt while you're replacing the oil filter housing seal. You only need to make sure it's tight. But if it's come loose you may want to replace the seal ring and use a small touch of oil-resistant thread sealer.

    This item fits the following BMWs:
    1992-1999 E36 BMW 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
    1999-2006 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
    1991-1995 E34 BMW 525i
    1997-2003 E39 BMW 525i 528i 530i
    2004-2005 E60 BMW 525i 525xi 530i 530xi
    2004-2005 E83 BMW X3 2.5i X3 3.0i
    2000-2006 E53 BMW X5 3.0i
    1997-2002 Z3 BMW Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
    2003-2005 E85 BMW Z4 2.5i Z4 3.0i
    2006-2008 E85 BMW Z4 M Roadster M Coupe
    Part #: 11421719855
    Price: $4.95 (USD) 
    Quantity:   
    This oil pan gasket fits BMW E30 325e 325es 325i 325is 325ic with M20 engine and E34 525i 1989-1990.

    This item fits the following BMWs:
    1984-1991 E30 BMW 325e 325es 325i 325is 325ic
    1989-1990 E34 BMW 525i
    Part #: 11131730234
    Price: $8.99 (USD) 
    Quantity:   
    This oil pan gasket fits BMW E34 535i and E32 735i 735il with M30 6 cylinder engine and E34 M5 with S38 6 cylinder engine.

    This item fits the following BMWs:
    1989-1993 E34 BMW 535i M5
    1988-1992 E32 BMW 735i 735il
    Part #: 11131315154
    Price: $12.95 (USD) 
    Quantity:   
    Oil Pan Gasket for all cars with M50, M52, M54, S50, S52 and S54 engines.

    This item fits the following BMWs:
    1992-1998 E36 BMW 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
    1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
    1991-1995 E34 BMW 525i
    1997-2003 E39 BMW 525i 528i 530i
    2004-2005 E60 BMW 525i 530i
    2004-2005 E83 BMW X3 2.5i X3 3.0i
    2000-2006 E53 BMW X5 3.0i
    1996-2002 Z3 BMW Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
    2003-2005 E85 BMW Z4 2.5i Z4 3.0i
    2006-2008 E85 BMW Z4 M Roadster M Coupe
    Part #: 11131437237
    Price: $28.75 (USD) 
    Quantity:   
    This upper oil pan gasket fits BMW E34 530i 540i E39 540i E38 740i 740il E31 840i 840ci with M60 or M62 engine.

    This item fits the following BMWs:
    1992-1995 E34 BMW 530i 540i
    1997-2003 E39 BMW 540i
    1995-2001 E38 BMW 740i 740il
    1992-1998 E31 BMW 840i 840ci
    Part #: 11131742109
    Price: $35.95 (USD) 
    Quantity:   
    This is the rear engine crankshaft seal for BMW's with the M60/M62/S62 V8 engines and M70/M73 V12 engines. The seal is 100mm X 125mm X 13mm, We recommend replacing this seal any time transmission is decoupled from the engine as this is a very difficult to area access.

    This item fits the following BMWs:
    1989-1995 E34 BMW 530i 540i
    1997-2003 E39 BMW 540i M5
    1988-1994 E32 BMW 740i 740il 750il
    1995-2001 E38 BMW 740i 740il 750il
    1990-1999 E31 BMW 840i 840ci 850i 850ci 850csi
    2000-2003 E53 BMW X5 4.4i X5 4.6is br> 2000-2003 E52 BMW Z8 Roadster
    Part #: 11141710247
    Price: $24.95 (USD) 
    Quantity:   
    This timing case gasket set fits BMW E12 528i E23 733i 735i E24 633csi 635csi E28 533i 535i E32 735i 735il E34 535i.

    This item fits the following BMWs:
    1979-1981 E12 BMW 528i 530i
    1982-1988 E28 BMW 533i 535i 535is M5
    1989-1993 E34 BMW 535i
    1977-1989 E24 BMW 630csi 633csi 635csi
    1977-1987 E23 BMW 733i 735i
    1988-1992 E32 BMW 735i 735il
    Part #: 11141735047
    Price: $19.95 (USD) 
    Quantity:   
    The gasket on this valley pan cover can fail and cause a coolant leak. Sometimes you may notice coolant leaking from the transmission bell housing. This fits E39 540i E38 740i E32 740i E34 540i X5 4.4i 4.6is E31 840i 840ci.

    This item fits the following BMWs:
    1993-1995 E34 BMW 530i 540i
    1997-2003 E39 BMW 540i
    1992-1994 E32 BMW 740i 740ili
    1995-2001 E38 BMW 740i 740il
    2000-2003 E53 BMW X5 4.4i X5 4.6is
    1990-1998 E31 BMW 840i 840ci
    Part #: 11141742042
    Price: $72.95 (USD) 
    Quantity:   
    This kit includes all the parts you will need to repair a leaking Valley Pan Gasket on your BMW V8. This fits E31 840i 840ci E32 740i 740il E34 530i 540i E38 740i 740il E39 540i E53 X5 4.4i (M62) X5 4.6is.

    This kit includes the following parts:
    4 x 11611433328 - Intake Manifold Gasket
    1 x 11141742042 - Valley Pan with Gasket
    2 x 11531710048 - O-Ring for Water Pump
    2 x 11531710055 - O-Ring for Water Pump
    1 x 11141736106 - Valley Pan Plastic Cover

    This item fits the following BMWs:
    1993-1995 E34 BMW 530i 540i
    1997-2003 E39 BMW 540i
    1992-1994 E32 BMW 740i 740ili
    1995-2001 E38 BMW 740i 740il
    1990-1998 E31 BMW 840i 840ci
    Part #: V8-VALLEY-PAN-KIT
    Price: $169.50 (USD) 
    This valve cover gasket fits cylinders 1-4 on BMW E32 740i 740il, E34 530i 540i, E38 740i 740il 1994-1998, E39 540i 1997-1998, E31 840i 840ci 1990-1998 with M60 or M62 engine.

    This item fits the following BMWs:
    1992-1995 E34 BMW 530i 540i
    1997-1998 E39 BMW 540i
    1992-1994 E32 BMW 740i 740il
    1995-1998 E38 BMW 740i 740il
    1990-1998 E31 BMW 840i 840ci
    Part #: 11129069871
    Price: $19.95 (USD) 
    Quantity:   
    This valve cover gasket fits cylinders 1-4 on BMW E32 740i 740il, E34 530i 540i, E38 740i 740il 1994-1998, E39 540i 1997-1998, E31 840i 840ci 1990-1998 with M60 or M62 engine.

    This item fits the following BMWs:
    1992-1995 E34 BMW 530i 540i
    1997-1998 E39 BMW 540i
    1992-1994 E32 BMW 740i 740il
    1995-1998 E38 BMW 740i 740il
    1990-1998 E31 BMW 840i 840ci
    Part #: 11129069872
    Price: $19.95 (USD) 
    Quantity:   
    This valve cover gasket fits BMW E23 733i 735i 1982-1987 - E24 633csi 635csi 1982-1989 - E28 533i 535i 535is 1982-1988 - E32 735i 735il 1988-1993 E34 535i 1989-1993 with M30 6 cylinder engine.

    This item fits the following BMWs:
    1982-1988 E28 BMW 533i 535i 535is
    1989-1993 E34 BMW 535i
    1982-1989 E24 BMW 633csi 635csi
    1982-1987 E23 BMW 733i 735i
    1988-1993 E32 BMW 735i 735il
    Part #: 11121730231
    Price: $10.95 (USD) 
    Quantity:   
    This valve cover gasket fits BMW E30 325e 325es 325i 325is 325ic 325ix 1984-1991 and E34 525i 1989-1990 with M20 engine.
    Part #: 11121730229
    Price: $7.95 (USD) 
    Replacement valve cover gaskets, including large cover gasket and spark plug cavity gaskets. Fits E34 M5 E28 M5 and E24 M6 with S38 engine.

    This item fits the following BMWs:
    1988 E28 BMW M5
    1991-1993 E34 BMW M5
    1987-1989 E24 BMW M6
    Part #: 11121312172-173
    Price: $42.76 (USD) 
    Quantity:   
    Original BMW replacement valve cover gaskets, including large cover gasket and spark plug cavity gaskets. Fits M50 (M50TU) engine with VAN0S. This is the OE BMW gasket rather than an OEM or aftermarket brand - we have found the OE gaskets are a better seal than the others.

    Alternate BMW part numbers:
    11129070531

    This item fits the following BMWs:
    1993-1995 E36 BMW 325i 325is 325ic
    1995 E36 BMW M3
    1993-1995 E34 BMW 525i
    Part #: 11120034107
    Price: $38.95 (USD) 
    Ever lose one of these or round one off while working on your car? This valve cover nut includes the washer and rubber seal. Sold Individually.

    This item fits the following BMWs:
    1992-1998 E36 BMW 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
    1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
    1991-1995 E34 BMW 525i
    1997-2003 E39 BMW 525i 528i 530i
    2004-2005 E60 BMW 525i 530i
    2004-2006 E83 BMW X3 2.5i X3 3.0i
    2000-2006 E53 BMW X5 3.0i
    1997-2002 Z3 BMW Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i
    1997-2000 Z3 BMW M Roadster M Roadster
    2003-2006 Z4 BMW Z4 2.5i Z4 3.0i
    Part #: 11121738607
    Price: $4.95 (USD) 
    Quantity:   
    Valve Cover Seal Washer. Seals the valve cover bolt to the cam cover. Not required when changing valve cover gasket but good to have as spares. Sold individually, packs of 3 (spares) or a complete set for your BMW. Choose your quantity option below, then click show customized price / update cart to show the Add to Cart option.

    If you want a different quantity, simply select the "single seal" option and change the quantity in your shopping cart.

    Applications:
    M50, M52, M52TU, M54, M60, M62, S54, S62
    1992-1998 E36 BMW 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
    1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
    1991-1995 E34 BMW 525i 530i 540i
    1997-2003 E39 BMW 525i 528i 530i 540i M5
    2004-2005 E60 BMW 525i 530i
    1992-1994 E32 BMW 740i 740il
    1995-2001 E38 BMW 740i 740il
    1990-1999 E31 BMW 840i 840ci
    2004-2006 E83 BMW X3 2.5i X3 3.0i
    2000-2006 E53 BMW X5 3.0i
    2000-2003 E53 BMW X5 4.4i X5 4.6is
    1997-2002 Z3 BMW Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Roadster
    2003-2005 Z4 BMW Z4 2.5i Z4 3.0i
    2006-2008 Z4 BMW Z4 M Roadster M Coupe
    Part #: 11121437395
    Price: $1.50 (USD) 
    Missing that little square cap with 3 silver stripes in your valve cover? This valve cover trim cap often gets misplaced when working on the M60/M62 engine. This fits E32 740i 740il E34 530i 540i E38 740i 740il E39 540i X5 x5 4.4i X5 4.6is thru 2003

    This item fits the following BMWs:
    1992-1995 E34 BMW 530i 540i
    1997-2003 E39 BMW 540i
    1992-1994 E32 BMW 740i 740il
    1995-2001 E38 BMW 740i 740il
    1990-1998 E31 BMW 840i 840ci
    2000-2003 E53 BMW X5 4.4i X5 4.6is
    Part #: 11121736007
    Price: $1.95 (USD) 
    Quantity:   
    This is the steel/rubber VAN0S gasket between the VANOS unit and cylinder head. It's a must-have item when replacing the VANOS unit and also a potential leak point on the M50/M52. The original gasket cannot be re-used so make sure you have a new one on hand.

    This item fits the following BMWs:
    1992-1999 E36 BMW 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
    1997-1998 E39 BMW 528i
    1997-1998 Z3 BMW Z3 2.8
    1998-2000 Z3 BMW Z3 M Roadster M Coupe
    Part #: 11361740840
    Price: $7.95 (USD) 
    Quantity:   
    Permatex Form-A-Gasket is a brushable sealant that you can use in many automotive applications where a gasket either doesn't exist or is damaged or no longer available. This 4oz container includes a brush for easy application. Permatex is slow-drying and will not harden over time (no cracks or leaks) and does not break down from exposure to gasoline, grease, or oils. It has a workable temperature range from -65*F to 400*F and is used throughout the aviation and automotive industries.

    Shipment Restriction UPS Ground/Standard shipping only. This item cannot be shipped outside of the lower 48 US states or Canada and cannot be shipped via Air services.
    Part #: 80019
    Price: $8.95 (USD) 
    Quantity: