Ensure optimal engine performance with the replacement of your vacuum system hoses. The vacuum system plays a crucial role in the engine's functionality, transforming it into an efficient pump that influences air-fuel mixture and combustion. Damaged vacuum hoses can lead to various performance issues, from rough idle to difficulties starting the engine. If you're experiencing these issues, it's time to upgrade to this plastic hose with a 2.3mm inner diameter. The hose is black, arrives in an 8-foot section, and can be easily cut to the desired size for a perfect fit.

Key Features:

• Engine Optimization: Replacing old hoses ensures the vacuum system operates at peak performance.
• 2.3mm Inner Diameter: Designed to meet specific engine requirements.
• Black Color: Blends seamlessly with the engine components.
• 8-Foot Section: Provides flexibility to cut the hose to the required length.
• Easy Installation: Upgrade without hassle for improved engine efficiency.

Upgrade your vacuum system with this high-quality plastic hose, addressing performance issues and ensuring your engine runs smoothly.

When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

Genuine BMW Ring -
This item fits the following BMW Chassis:
E39,E46

Fits BMW Engines including:
M52,M54
 

The TMS E36/Z3 6cyl Intake Tube Plug is intended to be used in a variety of applications ranging from ASC delete, deleting the idle control valve in a car with a aftermarket engine management system, re-routing the PCV hose to a catch can, aftermarket supercharged engines, or simply plugging one of the hose provisions in the E36 6cyl intake tubes. It also works great as a coolant hose plug. The diameter of the tip is 20mm (just over 3/4"). A low profile Oetker compression clamp is included. The plug can be drilled and tapped for a small air temp/water temp sensor, pre throttle body vacuum/boost/MAP sensor barb, or water alcohol/nitrous/methanol injector or barb. Works with M50, M50TU S52, M52, S52 throttle boots and may work in other applications with a 20mm hose.

Installation Instructions / More Details

This intake tube plug can be used in a variety of ways on these BMWs:
1992-1995 E36 325i, 325is, 325ic
1996-1998 E36 328i, 328is, 328ic
1999-1999 E36 328is, 328ic
1995-1999 E36 M3 coupe, sedan & convertible
1997-1999 Z3 2.8 liter
1992-1995 M50 engine (2.5 liter)
1996-1999 M52 engine (2.8 liter)
1995-1995 S50 engine (3.0 liter / US engine)
1996-1999 S52 engine (3.2 liter / US engine)

A silicone intake boot offers many advantages over the stock accordion-style boot:

• perfectly smooth interior surface (less turbulent air)
• stronger and more durable (no rips to create vaccum leaks)
• will not attract or radiate heat to the engine bay

This intake boot is the larger 3.5" size to replace the adapter and stock intake boot and delete ASC+T on E36 M3 and MZ3 models. Normally deleting ASC will require a new boot from a non-ASC model but this boot is stronger with a small power gain as a bonus. And you don't need the HFM adapter used with most HFM kits. The Mishimoto E36 boot has a perfectly smooth interior finish with no sharp angles or other obstacles for the intake air to be slowed by. Installing this boot assumes your car either does not have traction control (ASC), or you will be removing it from your car. Removing ASC is a great way to decrease intake restriction, and this intake boot is perfect for this upgrade.

This boot has two ports to work on early and late E36 models. Early cars have vaccum and the crankcase vent hoses entering the intake boot. Later models only have the vaccum hose (the crankcase vent empties into the oil dipstick. We offer an intake boot plug for the later models to plug one of these holes. You can add one from the options below.

Choose from black, blue, or red silicone.

This Mishimoto silicone intake boot fits the following BMWs: 
1995-1999 E36 M3 3.0 & 3.2 (with ASC delete) 
1998-2000 MZ3 M Roadster/Coupe (S52 engine) 

ECS Silicone Coupler

Upgrade your BMW with the ECS Silicone Coupler. This straight 3 5/8" ID (92mm) x 3" L coupler is designed to enhance your vehicle's performance and durability. Crafted from high-quality silicone, it ensures long-lasting reliability and superior performance.

• Enhances vehicle performance
• Durable construction for long-lasting reliability
• Specifically designed for BMW vehicles