 |
AeroCatch Racing Hood and Body Panel Fasteners (Pair) - Better than hood pins!
(more info)
As used by Turner Motorsport on our championship winning BMW race cars, the new aerodynamically efficient and asthetically styled AeroCatch® is setting new standards in hood fixing for the 21st century. Say goodbye to your standard hood pins -- these are better all around.
The AeroCatch is available in two installation styles:
1.) TOP MOUNT - Mounts from the exterior surface of the hood. This style makes for an easier installation.
2.) BOTTOM MOUNT - Mounts flush from the interior side of the hood. This style is slightly harder to mount, but makes for less exposed surface of the AeroCatch fastener.
Each AeroCatch hood fastener kit comes complete with two AeroCatch assemblies, all pins, washers, nuts and bushings, as well as mounting template and installation instructions. Professional installation recommended. We have found these to be the best hood fasteners, and have since replaced all standard racing hood pins on our E46, E90 and E92 race cars in favor of these superior design. These save us precious time in pit stops and offer a more fail-safe mechanism. We recommend them for any car.
Secure your investment! Add keyed locks to your pair of AeroCatches -- PERFECT for use on a street car, or any car that may be left unattended for any amount of time. Keep prying eyes (and hands) out of your engine bay by opting for the (optional) locking version of the AeroCatch. Locking versions available in both TOP MOUNT and BOTTOM MOUNT installation styles. Includes pre-installed lock cylinders and a pair of matched keys. Simply select your style below, before adding to cart.
 How They Work (PDF)
Installation/Prep Instructions (PDF)
Tech Specs (Top Mount) PDF
Tech Specs (Bottom Mount) PDF
|
| Part #: AEROCATCH |
| Price: $74.95 (USD) |
|
|
|
|
|
 |
Antenna Base Unit - E36 Convertible Z3
(more info)
This antenna base unit is receiver that the small mast screws into. It can often become damaged when the mast is jarred.
This item fits the following BMWs:
1992-1998 E36 BMW 318ic 323ic 325ic 328ic M3 - Only for Convertibles
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster - Not for use on Coupes
|
| Part #: 65218375159
(65-21-8-375-159)
|
| Price: $104.95 (USD) |
|
|
|
|
|
Antenna Mast - E36 Convertible Z3
(more info)
This antenna mast is the short rod that mounts on the rear outer fender. This is an original BMW product.
This item fits the following BMWs:
1992-1998 E36 BMW 318ic 323ic 325ic 328ic M3 - Only for Convertibles
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster - Not for Coupes
|
| Part #: 65218375160
(65-21-8-375-160)
|
| Price: $34.95 (USD) |
|
|
|
|
 |
BMW Jack Pad for E36, E46, E65, Z4, X3 & X5
(more info)
This jack plug is used on many BMWs to protect the under carriage while jacking. They install into receptacles under the rockers at all 4 corners, and give your BMW a "puck" for the cars weight to rest on.
These jack pads commonly get lost or damaged through the years. If your BMW is missing a few (or all) of them, it's time to get some new ones. Very easy to replace and install, these take just seconds to replace. We've found that on the 1992-1999 E36 3 series these make a GREAT upgrade to the original ones normally found on the E36. Be sure to get a complete set of 4 if you are installing these on an E36 (these are sold individually).
Found and used on the following BMWs:
1992-1999 E36 3 series - UPGRADE for all E36, including E36 M3, 318i, 318is, 318ti, 325i, 325is, 325ic, 328i, 328is, 328ic, 323is
1999-2005 E46 3 series (including 323i, 323Ci, 325i, 325xi, 325Ci, 328i, 328Ci, 330i, 330xi, 330Ci, and E46 M3)
2002-2008 E65 7 series including 745i, 745Li, 750i, 750Li, 760Li
2003-2008 Z4 Roadster & Coupe
2004-2008 X3 SAV including X3 2.5, X3 3.0, X3 3.0si
2000-2006 X5 SAV including X5 3.0, X5 3.0si, X5 4.4, X5 4.6is, X5 4.8is
|
| Part #: 51718268885
(51-71-8-268-885)
|
| Price: $14.95 (USD) |
|
|
|
|
 |
Carbon Fiber License Plate Frame
(more info)
This is a 100% real carbon fiber license plate frame cover. These 3K twill weave carbon fiber license plate frames fit the standard size US license plate. It's perfect for those automobile enthusiasts with carbon fiber parts on their beloved vehicle or just simply wants to add a performance touch.
Please note that this license plate frame is made of real carbon fiber and not aluminum/ plastic with carbon fiber look, those prints will fade and discolor over time.
Package will include 1 real carbon fiber license plate frame that fits onto standard size US license plates, screws are not included for the installation.
|
| Part #: UN-0007 |
| Price: $39.95 (USD) |
|
|
|
|
 |
E36 Fog Light Block-Off Cover Set (L&R Pair)
(more info)
E36 Fog Light Block-Off Covers are perfect for track cars when fog lights are removed. They fit perfectly into the fog light openings and provide a flush finished look to your spoiler. They can even be painted to match your bumper for an even more factory-like appearance. Sold as a pair.
Click here for install info
|
| Part #: 51118122449/50 |
| Price: $33.90 (USD) |
|
|
|
|
 |
E36 Jack Pad (Sold Individually)
(more info)
This hard plastic round "puck" is the stock jack pad as found on all 1992-1999 E36 3 series BMW, which protects the undercarriage while jacking/lifting. It's very common to be missing a couple so check your car -- you may be missing one or several of them! If you are replacing a full set, be sure to get 4 (these are sold individually).
This jack pads fits the following BMWs:
1992-1999 E36 318i, 318is, 318ic & 318ti
1992-1995 E36 325i, 325is & 325ic
1996-1998 E36 328i, 328is, 328ic, 323is & 323ic
1999-1999 E36 328is, 328ic, 323is & 323ic
1995-1999 E36 M3 3.0/3.2 coupe, sedan & convertible
|
| Part #: 51711960752
(51-71-1-960-752)
|
| Price: $13.95 (USD) |
|
|
|
|
 |
E36 M3 Side Skirts (Pair)
(more info)
M3 Side Skirt set is a complete kit and will fit E36 2-door, 4-door, and Convertible. This is a GENUINE BMW part, same one that is used on the E36 M3. |
| Part #: 82119403141
(82-11-9-403-141)
|
| Price: $429.95 (USD) |
|
|
|
|
 |
E36 M-Technic / M3 Door Moldings
(more info)
These M logo door moldings fit all E36 325, 328, 318. They give your car an updated sporty M3 look. They feature a wider, flatter profile, which more closely matches that of the front and rear bumper moldings. This Genuine BMW kit includes everything you need to give your E36 the M3 / M-Technic door moldings. The front door moldings include the iconic BMW "M" logo. For 2-Door or 4-Door models (select your body style below)
These M door moldings fit the following BMWs:
1992-1995 E36 325i, 325is, 325ic
1996-1998 E36 328i, 328is, 328ic, 323is, 323ic
1999-1999 E36 328is, 328ic, 323is, 323ic
1995-1999 E36 M3 coupe, sedan & convertible (select below) |
| Part #: 82119403140-check |
| Price: $194.95 (USD) |
|
|
|
|
|
 |
E36, E46 & E9X Racing Tow Hooks (Front & Rear)
(more info)
E36 / E46 / E90 / E92 Racing Tow Hooks - collapsible, now mandated by BMW CCA Club Racing. Available in red and black. Folding design meets SCCA, CCA, NASA, and NABR and Grand AM (2007) tow hook regulations. Hook is made from 6061 T6 aluminum and is hard anodized. The inner diameter of ring is 2". When in folded position, tow hook sits behind the furthest point of the bumper. Kit includes both front and rear tow hooks. |
| Part #: TOW/E36/E46 |
| Price: $139.95 (USD) |
|
|
|
|
|
|
|
|
 |
Genuine BMW License Plate Frame - Chrome/Silver Polished
(more info)
This is a chrome/silver polished appearance license plate frame with "BMW" logo. This is a Genuine BMW part that looks great on any BMW. The "BMW" insert is domed for a classy look. These look great framing the license plate on any BMW.
These are sold individually, so be sure to order two -- one for the front license plate, and one for the rear. |
| Part #: 82120010395
(82-12-0-010-395)
|
| Price: $39.99 (USD) |
|
|
|
|
 |
Hood Shock - E36 Coupe & Convertible
(more info)
This is a single front hood shock or lift strut for BMW E36 coupes and convertibles. Sold individually.
This item fits the following BMWs:
1992-1998 E36 BMW 318is 318ic 323is 323ic 325is 325ic 328is 328ic M3 - coupe & convertible models only
|
| Part #: 51238119558
(51-23-8-119-558)
|
| Price: $27.95 (USD) |
|
|
|
|
 |
Hood Shock - E36 Sedan
(more info)
This is a single front hood shock or lift strut for BMW E36 Sedans. Sold individually.
This item fits the following BMWs:
1992-1998 E36 BMW 318i 318ti 325i 328i M3 - 4 door Sedan Models
|
| Part #: 51231960852
(51-23-1-960-852)
|
| Price: $21.95 (USD) |
|
|
|
|
 |
License Plate frame Black w/ M logo
(more info)
This is a Black license plate frame with the BMW motorsport "M" logo. This Genuine Original BMW part is a great way to improve the looks of any BMW. The "///M" emblem is domed for a classy look. These are sold individually, so be sure to order two -- one for the front license plate, and one for the rear. |
| Part #: 82120010404
(82-12-0-010-404)
|
| Price: $39.99 (USD) |
|
|
|
|
 |
License Plate frame Silver Polished w/ M logo
(more info)
This is a Silver polished license plate frame with the BMW motorsport "M" logo. This Genuine Original BMW part is a great way to improve the looks of any BMW. The "///M" emblem is domed for a classy look. These are sold individually, so be sure to order two -- one for the front license plate, and one for the rear. |
| Part #: 82120010405
(82-12-0-010-405)
|
| Price: $39.99 (USD) |
|
|
|
|
 |
M3 License Plate Frame Black
(more info)
This is a Black license plate frame with the BMW motorsport "M3" logo. This Genuine Original BMW part is a great way to improve the looks of any BMW. The "///M3" insignia is domed for a classy look. These look great framing the license plate on any E30 M3, E36 M3, E46 M3, or E90/E92 M3.
These are sold individually, so be sure to order two -- one for the front license plate, and one for the rear. |
| Part #: 82120010400
(82-12-0-010-400)
|
| Price: $39.99 (USD) |
|
|
|
|
 |
M3 License Plate Frame Silver Polished
(more info)
This is a Silver polished / chrome appearance license plate frame with the BMW motorsport "M3" logo. This Genuine Original BMW part is a great way to improve the looks of any BMW. The "///M3" insignia is domed for a classy look. These look great framing the license plate on any E30 M3, E36 M3, E46 M3, or E90/E92 M3.
These are sold individually, so be sure to order two -- one for the front license plate, and one for the rear. |
| Part #: 82120010401
(82-12-0-010-401)
|
| Price: $39.99 (USD) |
|
|
|
|
 |
M5 License Plate Frame Black
(more info)
This is a Black license plate frame with the BMW motorsport "M5" logo. This Genuine Original BMW part is a great way to improve the looks of any BMW. The "///M5" emblem is domed for a classy look and these look superb framing the license plate of any E28 M5, E34 M5, E39 M5, or E60 M5.
These are sold individually, so be sure to order two -- one for the front license plate, and one for the rear. |
| Part #: 82110147531
(82-11-0-147-531)
|
| Price: $39.99 (USD) |
|
|
|
|
 |
M5 License Plate Frame Silver Polished
(more info)
This is a silver polished / chrome appearance license plate frame with the BMW motorsport "M5" logo. This Genuine Original BMW part is a great way to improve the looks of any BMW. The "///M5" emblem is domed for a classy look and these look superb framing the license plate of any E28 M5, E34 M5, E39 M5, or E60 M5.
These are sold individually, so be sure to order two -- one for the front license plate, and one for the rear. |
| Part #: 82120149104
(82-12-0-149-104)
|
| Price: $39.99 (USD) |
|
|
|
|
 |
Motorsport Tow Strap
(more info)
Tow strap as used on the TMS race cars, this BMW Motorsport part attaches to the front and rear bumper shock then threads through a small slit you cut in the bumper cover. Eliminate the need to carry around the factory metal eye hook. Color is bright orange so tow truck operators can quickly identify location. Two required per car, price is per strap. |
| Part #: TOW |
| Price: $29.52 (USD) |
|
|
|
|
 |
No Holes License Plate Bracket - E36, E90, E92, E82, Z3
(more info)
Drill holes in your BMW's front bumper? No way! The 'NO HOLES' License Plate Bracket (NHLPB) allows you to mount a front plate to your BMW without having to drill into your front bumper. Instead, it utilizes a custom machined stud that screws into the towhook receptacle. All parts are made from Stainless Steel to ensure no rust. The mounting hardware utilizes nylock nuts or lock washers which will not loosen from vibration. The plate attachment screws are button head socket cap screws for a nice clean look. Comes complete with Tow Hook Bolt, Bracket, One-Piece Plate Holder, and Hardware Pack.. Installation is quick and easy with standard hand tools.
Optional Brackets:
The Offset Bracket allows customers to move the backing plate 2 inches to the left or right as a work around for fog lights, parking sensors, or just a different look.
#GMG-OFFSET3 bracket is required for use on cars with PDC (Park Distance Control).
#GMG-OFFSET1 bracket is useful to provide extra clearance on cars with fog lights.
This item fits the following BMWs:
2008+ E82 BMW 128i 135i - Not for cars with Sport Bumper or M bumper
1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive - Sedan- Not for cars with Sport Bumper or M bumper
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon - Not for cars with Sport Bumper or M bumper
2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive - Coupe -Not for cars with Sport Bumper or M bumper
2007-2012 E93 BMW 328i 335i - Convertible -Not for cars with Sport Bumper or M bumper
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
|
| Part #: GMG-BMW45 |
| Price: $49.95 (USD) |
|
|
|
|
|
 |
Racing Hood Pin Kit
(more info)
This universal fit racing hood pin kit not only looks great but provides a safe way to secure your hood at the track. This kit contains everything you need, two clasps, threaded pins and a complete hardware kit (not shown.) A durable anodized finish is available in red or blue. |
| Part #: HOODPIN |
| Price: $19.95 (USD) |
|
|
|
|
|
 |
Turner Motorsport Rear Deck Emblem / Badge
(more info)
TMS is proud to offer our own rear deck emblem, constructed out of the highest quality injection molded ABS plastic, then chrome plated and bonded to an OEM automotive grade adhesive backing. It perfectly accentuates the rear of your BMW and blends in flawlessly with the factory badges. Our badge measures 5" (127mm) x 1.1" (28mm) – similar to the dimensions on many of the factory badges. |
| Part #: TMS EMBLEM |
Regular Price: $24.95 (USD)
Sale Price: $14.95 (USD) |
|
|
|
|
 |
Turner Motorsport Red Nylon Tow Strap
(more info)
Our Red Nylon Tow Strap is far and above the best tow strap available for the modern BMW chassis. We use a heavy-duty Nylon strap webbed around a stainless steel stud. The precision-cut stud is designed for the E90/E92 BMW chassis but also fits all E36, E46, E82, Z3, and Z4. Note that on some models you may need to modify the bumper slightly. The Nylon strap is a better pickup point than a fixed steel ring, which will add weight and protrude past the bumper. Some racing series have banned the steel rings because they increase the likelihood of contact during close racing. And the bright red Nylon makes it easy for tow truck operators and safety crews to spot. On some models, the strap may be tucked behind the bumper panel when not on track, which makes this perfect for dual-use track/street cars and full racecars alike. Priced per strap so order two for the front and rear.
This item fits the following BMWs:
1992+ E36 3-series, incl M3 BMW
1999+ E46 3-series, incl M3 BMW
2007+ E82 1-series BMW
2006+ E90 3-series, incl M3 BMW
2007+ E92 3-series, incl M3 BMW
2007+ E93 3-series, incl M3 BMW
1996+ Z3, incl M BMW
2003+ Z4, incl M BMW
|
| Part #: TMI9020TSI |
| Price: $99.95 (USD) |
|
|
|
|
|
Windshield Cowl Cover - Left - E36 Sedan
(more info)
This items is either referred to as the Hood Cowl Cover or Windshield Cowl Cover. It is the black plastic cover at the base of the windshield. It may fade or crack with age. This item may appear to be one piece but it is actually 2 separate parts - 1 left - 1 right. It fits E36 318i 325i 328i M3 4 door models and E36 318ti Compact models. It will not fit E36 Coupes or Convertibles.
This item fits the following BMWs:
1992-1998 E36 BMW 318i 318ti 325i 328i M3 - 4 Door Only
|
| Part #: 51711960843
(51-71-1-960-843)
|
| Price: $17.95 (USD) |
|
|
|
|
|
|
Windshield Cowl Cover - Right - E36 Sedan
(more info)
This items is either referred to as the Hood Cowl Cover or Windshield Cowl Cover. It is the black plastic cover at the base of the windshield. It may fade or crack with age. This item may appear to be one piece but it is actually 2 separate parts - 1 left - 1 right. It fits E36 318i 325i 328i M3 4 door models and E36 318ti Compact models. It will not fit E36 Coupes or Convertibles.
This item fits the following BMWs:
1992-1998 E36 BMW 318i 318ti 325i 328i M3 - 4 Door Only
|
| Part #: 51711960844
(51-71-1-960-844)
|
| Price: $17.95 (USD) |
|
|
|
|
|
Body Trim and Accessories
