 |
Clutch Kit for JB Racing Flywheel Kit - E36, E46, Z3, Z4
(more info)
This replacement "sprung-hub" clutch package is designed to work with our (JB Racing) lightweight aluminum flywheel for the BMW E36, E46, Z3, and Z4 models. The Sachs HD clutch disc has a sprung hub to minimize noise and vibration and organic linings to give the feel and engagement of a stock clutch.
The Sachs HD pressure plate will clamp with greater force -- allowing approximately 350 ft-lbs of torque, which makes it an obvious upgrade from the stock clutch kit.
Because Sachs is an OE supplier to most German cars, replacement parts are just a phone call away. This kit uses the stock throw-out bearing (included in the price!).
**Not for use with stock flywheel or other brands of lightweight flywheels** |
| Part #: 881861999855-K |
| Price: $915.85 (USD) |
|
|
|
|
 |
E36 M3 Clutch & Flywheel Upgrade Package for E36 323/325/328
(more info)
This kit uses the stock E36 M3 clutch with a JB Racing aluminum flywheel and M3 clutch slave cylinder for an outstanding improvement in the non-M E36. The stock M3 clutch is larger than the E36 325 disc and was used in the 321hp Euro M3 – way more clutch than you need on a 2.5 or 2.8-liter M50 and M52 (even supercharged cars). But because it’s a factory clutch the feel, durability, engagement, fitment, etc are OE spec! This package is in one of our own E36 325’s and has performed perfectly in over 60,000 miles of use.
OEM replacement clutch parts
lightweight aluminum flywheel for faster acceleration and quicker revs (15lbs less than stock)
comparable cost to OEM replacement parts
direct fit with no installation issues
If you own an E36 but have never done a clutch job, you’re in for an unpleasant surprise! The stock flywheels don’t usually last much longer than 100,000 miles. You might be able to have it machined but only if you’re lucky. The best route is to have a new flywheel on hand when installing the clutch. This package is actually about the same price as buying a new OEM clutch and new OEM flywheel! And there’s a big performance boost!
Included with this Clutch / Flywheel package:
- E36 M3 3.2 Sachs OEM clutch kit - clutch disc, pressure plate, throw-out
bearing
- E36 M3 JB Racing aluminum flywheel
- new pilot bearing
- E36 M3 clutch slave cylinder (same part as on the 328 - not required)
- UUC Clutch Stop
What about noise? This package was installed in Drew’s 1994 325is 60,000 miles ago. “I expected a trade-off when putting the aluminum flywheel on but the rattle is way less than what I was scared into believing. The rattle is not there all the time. And when I do hear it, I know what it is and immediately dismiss it. I’ve never had a bystander tell me to get my car checked out. And I’ve never had a passenger comment on it – they just ask why I’m revving the car so high… Without a doubt this will be a repeat mod on a future car. I’m using the regular Red Line MTL oil too.”
This Clutch & Flywheel Package Fits:
E36 323is, 323iC - 1997, 1998, 1999
E36 325i, 325is, 325iC - 1992, 1993, 1994, 1995
E36 328i, 328is, 328iC - 1996, 1997, 1998, 1999
E36 M3 - 1995, 1996, 1997, 1998, 1999. Makes a great overhaul package!
|
| Part #: FLYE36M50UPGRADE |
| Price: $912.81 (USD) |
|
|
|
|
|
 |
E36 M3 SACHS HD Pressure Plate
(more info)
Experience longer life and less slippage with this SACHS heavy duty pressure plate. This pressure plate is recommended for car making over 290 hp and the RACE disc is suggested for racing conditions only due to its "on or off" nature |
| Part #: 883082698 |
| Price: $449.00 (USD) |
|
|
|
|
 |
E36, E46, Z3, Z4 HD Clutch and Flywheel Kit
(more info)
This lightweight aluminum flywheel w/ Heavy Duty "sprung-hub" clutch package is the best-engineered solution for the BMW E36, E46, Z3, and Z4 models. Instead of picking a clutch from another car that may or may not work at all, the engineers at JB Racing have taken all of the guess work out of this upgrade and incorporated a Sachs HD sprung hub clutch with the correct pressure plate and combined it with our most-popular aluminum lightweight flywheel. The Sachs HD clutch disc has a sprung hub to minimize noise and vibration and organic linings to give the feel and engagement of a stock clutch. Mixing and matching of the incorrect clutch, pressure plate, and flywheel components can lead to inconsistent engagement and feel -- why make your clutch feel worse?
In addition, the Sachs HD pressure plate will clamp with greater force -- allowing approximately 350 ft-lbs of torque,
which makes it an obvious upgrade from the stock clutch kit. And with the aluminum flywheel weight savings is substantial over the stock dual-mass flywheel - which allows your motor to spool up faster and transmit more HP to the ground.
Because Sachs is an OE supplier to most German cars, replacement parts are just a phone call away. This kit uses the stock throw-out bearing (included in the price!).
BMW Fitment/Applications:
1992-1999 E36 3 Series 325i, 325is, 328i 328is, 323is
1995-1999 E36 M3
1999-2005 E46 3 Series 323i, 323Ci, 325i, 325Ci, 328i, 328Ci, 330i, 330Ci (with 5-speed transmission)
1997-2002 Z3 Roadster/Coupe with 2.3, 2.5, 2.8 or 3.0 engine
1998-2002 MZ3 M Roadster & M Coupe
2003-2005 Z4 Roadster/Coupe Z4 2.5, Z4 3.0 (5-speed transmission)
|
| Part #: 520-010S- |
| Price: $1,532.90 (USD) |
|
|
|
|
|
 |
Racing Clutch/Flywheel Assembly
(more info)
Developed for our World Challenge cars, our racing aluminum ultra- lightweight flywheel w/race clutch weighs only 11 lbs (clutch AND flywheel) For track/race cars only, the installation of this flywheel and clutch will dramatically reduce the reciprocating mass that the motor needs to spin, therefore increasing response and acceleration. Features a 5.5"/140mm PT race twin-disc clutch that can handle up to 500 HP (optional triple-disc clutch, +$150). This is the ultimate set up for your E36 racecar. Kit includes: Flywheel with bolts, clutch and race throw out bearing. Not for street use, track use only - its not meant to be slipped! |
| Part #: WCCLUTCH |
| Price: $1,899.00 (USD) |
|
|
|
|
|
 |
UUC Twin Disk Flywheel / Clutch Package - E36 M3, 323/325/328 - Z3
(more info)
Whether your E36 M3, MZ3 or any 6 Cylinder E36 or Z3 is used for drag racing, drifting, or just embarrassing exotic supercars on the street, you need a clutch that can handle the abuse. This Twin Disk / Flywheel kit is ideal for cars with up to 1000hp including Turbocharged or Supercharged E46 M3's.
Everybody is on a budget these days and the coin spent on some of the best parts does not have to spin up as fast as your boost gauge.
Developing class-leading flywheel and clutch technology to even greater heights, UUC has developed a significantly new Twin Disk flywheel/clutch package designed for BMWs developing the highest levels of power from a turbo boost or supercharging. Two disks is that much more torque capacity and that much more tolerance of hardcore flogging.
Amazingly, they have done this at a price competitive with the best traditional single disk systems.
Until now, taming a 600hp+ BMW meant living with a clutch that was the stereotype "on/off switch" with rough engagement characteristics that made daily-driving a compromise. By incorporating larger disks than the average multi-disk clutch, the UUC design maintains original equipment smooth operation yet easily handles power levels approaching 1,000hp.
Larger surface area of a smoother-functioning material is the key to combining the characteristics of high torque capacity with street-friendly operation in this all-new design. This may be the rare combination in high performance of best bargain and best performance.
Total rotating mass of the complete flywheel and twin clutch package is 25.5lbs, the same total mass as a typical 11.5lb flywheel coupled with the clutch.
Choose the Organic compound for cars with less than 850hp or the Feramic compound for cars with less than 1000hp.
This item fits the following BMWs:
1992-1998 E36 BMW 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1991-1995 E34 BMW 525i
1997-2002 Z3 BMW Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
|
| Part #: UUC-TD-B1 |
| Price: $1,599.00 (USD) |
|
|
|
|
|
HD/Racing Clutch Kits
