Current BMW:

(E36) 3-series 1992-1999 Clear BMW chassis

BMW E36 Exhaust

Borla Cat-Back Exhausts

Borla Cat-back Muffler System - E36 325i/328i/M3 (more info)

Our most popular exhaust system is back, and is better than ever! Borla has always been our favorite sounding system for the BMW, not too loud, not too quiet, just perfect. 100% stainless-steel; Great sound; 76mm dual round tips.

Click here for M3 Dyno Data.

Part #: 14553

Regular Price: $908.99 (USD)
Sale Price: $787.99 (USD)

Corsa Performance Exhaust

Corsa Performance Cat-Back Exhaust - E36 M3/328i/325i (more info)

Corsa Performance T-304 stainless exhaust system for 1992-1999 E36 325i, 325is, 328i, 328is and all 1995-1999 E36 M3. Features mandrel-bent tubing, TIG-welded seams, true bolt-on installation (no cutting or welding), polished dual staggered and angle-cut round tips, as well as drone-free quiet-cruising, thanks to Corsa's patented Reflective Sound-Cancellation (RSC) technology. This technology is a non-electrical noise control system without the complication of incorporating the use of electronics or speakers. Essentially, engine sound (pressure) waves are reflected in passages inside the muffler 180 degrees out of phase to cancel out unwanted sound waves. The result is a "tuned" muffler that "cleans up" the noise without eliminating the pure sound of power associated with a high-performance vehicle. Using this Corsa technology, the stainless steel Corsa Performance line of mufflers are tuned to eliminate passenger cabin resonance and produce just the "right" sound. The result is quieter cruising with an awe-inspiring roar at full throttle. This system is amazingly quiet during normal cruising, due to the "no drone" RSC technology, yet still has an aggressive presence and full sound while under throttle. This makes for ideal sound for those that want an aggressive "roar" while driving hard, yet still want a more discrete lower volume for normal cruising. (Please check out the video below for a sound sample).

As well as the tuned sound and drone eliminating sound, the mufflers use a straight-thru flow design for maximum flow and the least amount of restriction. Decreasing the restrictive back-pressure results in more horse power and torque, as well as the inspired sound this system creates for your E36's inline 6 cylinder engine. This is a complete cat-back system, which bolts to the factory catalytic converter and replaces everything rear of the cat on your E36 M3/328/325. Made 100% in the USA in Corsa's Ohio facility, this exhaust features a lifetime warranty from the manufacturer.

This item fits the following BMWs:
1992-1998 E36 BMW 325i 325is 325ic 328i 328is 328ic M3

Part #: COR14553S

Price: $949.95 (USD)

Supersprint Exhaust Systems

E36 318i Supersprint Muffler (more info)

rear muffler section; bolts to original catalytic converter; System includes a resonator and a muffler with twin 76mm round tips..

Applications:
1992-1998 E36 318i, 318is, 318iC, covers all sedan, coupe, and convertible models (does not include 318ti hatchback)

Part #: 784206

Price: $783.95 (USD)

E36 318ti Supersprint Stainless Performance Muffler (more info)

rear muffler section; mounts to original catalytic converter with Supersprint connector (included); terrific sound without being overly loud. New design with stainless steel construction. Dual round 76mm polished tips..

Applications:
1995-1999 E36 318ti Compact hatchback

Part #: 786606.786543

Price: $1,185.90 (USD)

E36 323i Supersprint Muffler (more info)

rear muffler section; bolts-on to original catalytic converter; dual 76mm round tips.

Applications:
1997-1999 E36 323is, 323iC, covers coupe and convertible models

Part #: 783506

Price: $808.95 (USD)

E36 325/328/M3 Supersprint Race Exhaust (more info)

cat-back straight-flow racing muffler; 100% stainless steel for long life. This is a race exhaust that is much louder than the standard Supersprint for the E36.

Applications:
1992-1995 E36 325i, 328i, M3

Part #: 043444.043406

Price: $1,123.90 (USD)

E36 325i/328i Supersprint Muffler (more info)

rear muffler section; bolts-on to original catalytic converter/Supersprint center section (part #785402); dual 76mm round tips.

Applications:
1992-1999 E36 325i, 325is, 325iC, 328i, 328is, 328iC, covers all sedan, coupe, and convertible models

Part #: 783606

Price: $774.95 (USD)

E36 325i/M3 1992-95 Supersprint Center Resonator (more info)

center section; mounts to Supersprint headers (part #785501); bolts-on to stock or aftermarket rear muffler section.

This part alters or deletes the emissions equipment on your car. Because of this, we require a waiver of emissions compliance to be signed and sent in to TMS. You can download the waiver here.

Applications:
1992-1995 E36 325i, 325is, 325iC, M3 coupe, sedan, convertible

Part #: 785402

Price: $574.95 (USD)

E36 M3 Supersprint Stainless-Steel Muffler (more info)

rear section; bolts-on to stock catalytic converter/Supersprint center section (part #785402); 100% stainless-steel; dual 76mm round polished tips

Applications:
1995-1999 E36 M3 coupe, sedan, and convertible
also bolts on to 1992-1999 325i, 325is, 325iC, 328i, 328is, 328iC

Part #: 784406

Price: $1,215.95 (USD)

Euro E36 M3 Supersprint Center Resonator (more info)

Euro E36 M3 Supersprint Center Resonator. Fits Euro cars Only. Will not work on US cars without the rest of the Supersprint Euro exhaust.

This part alters or deletes the emissions equipment on your car. Because of this, we require a waiver of emissions compliance to be signed and sent in to TMS. You can download the waiver here.

Applications:
1995-1999 E36 M3 coupe, sedan, convertible
1992-1999 325i, 325is, 325iC, 328i, 328is, 328iC coupe, sedan, convertible

Part #: 784302

Price: $716.95 (USD)

Exhaust Systems

E36 Track Pipe - Replaces Catalytic Converters (more info)

This track/racing center exhaust for the E36 325 and E36 M3 replaces the heavy and restrictive stock catalytic converters. On a 1995 M3 this exhaust alone showed gains of almost 20 HP and 15hp on the 1996-1999 M3! It bolts to the stock exhaust manifold or the TMS Shorty Headers without cutting or fabrication. The system features 100% stainless steel materials, a straight through, no restriction resonator, 3" inlet pipe with stock diameter twin tubes, and total bolt-on design using stock type flanges and hanger points. The racing Track Pipe is nearly 30% lighter than the factory cat section! We recommend using this with the Borla cat-back muffler, because of its light weight, great sound, and proven performance gains. Sound quality is refined, not overly loud.

This exhaust includes a single oxygen sensor port for OBD-1 models. For an OBD-2 E36 M3, the use of oxygen sensor simulators is required to keep the Check Engine Light off (optional add-on below). Note: while this track pipe will fit the E36 328i/is, the O2 simulators will not keep the Check Engine Light off.

If you would like new gaskets for the exhaust manifolds and rear muffler connections, choose the option below to 'include gaskets'.

This part alters or deletes the emissions equipment on your car. Because of this, we require a waiver of emissions compliance to be signed and sent in to TMS. You can download the waiver here.

Part #: AA-EXHAUST

Price: $729.95 (USD)

Headers

E36 / E36M3 / Z3 Shorty Headers (more info)

50 STATE LEGAL! A Turner Motorsport developed part, our "shorty style" performance Headers are 100% stainless steel, are 2-stage ceramic coated and were CAD designed to be equal length and flow with equal pressure. These headers were designed to increase mid range power. Bolt these on to your stock E36 M3/325/328 or Z3/MZ3 for a instant increase of 12 ft-lb torque and a 9 HP... more on modified engines!

We have 2 versions of these. One for 1992-1995 OBDI cars (M3, 325i & 325is) and another that covers all the 1996 to 1999 OBDII cars which have proper air-injection ports to ensure no fault codes or check engine lights. If you are comparing our headers to "the other guys", be sure to take a look at the outside TIG welding of ours (for smoother flow) and the equal length of all our runners (increased efficiency.)

Stainless steel construction retains heat much better than the competitor's mild steel construction, resulting in increased exhaust velocity. If you want the best shorty header on the market, this is the one. (Pictured are OBD1 headers.) Unlike other headers on the market, the TMS Shorty headers bolt directly up to stock BMW catalytic converter! Don't be fooled by cheap, non stainless imitations that sell for less than ours. Trust us: you get what you pay for. (left-hand drive models only)

M50 Headers - In Stock
M52 Headers - Due to ship in early June

This Shorty Performance Header fits the following BMWs:
1992-1995 E36 3 Series 325i & 325is (OBDI version)
1994-1995 E36 M3 3.0 liter (OBDI version)
1996-1999 E36 3 Series 328i, 328is & 323is (OBDII)
1996-1999 E36 M3 3.2 liter (OBDII version)
1997-1999 Z3 Roadster/Coupe including 2.3, 2.5 & 2.8
1997-2000 MZ3 M Roadster & M Coupe 3.2 liter (S52 engine)

Part #: SHORTYHEADER

Price: $749.95 (USD)

E36 325i/328i/M3 Supersprint Header System (more info)

The Supersprint Stainless Steel Tubular Headers for the E36 replace the factory cast exhaust manifold and provides up to a 12 HP gain. When these headers are used with a free flow exhaust you will notice a real improvement in mid and top-end power. Requires some modification to a stock catalytic converter system for installation. Or can be used with Supersprint center resonator, p/n 785402.(left-hand drive models only)

Part #: 785501

Price: $1,219.95 (USD)

Supersprint Euro Header Upgrade for E36 M3 (more info)

Supersprint Euro Headers for the 1992-1995 E36 325 and M3. Euro headers are larger in diameter than what came on the US. This is a great header upgrade for highly-tuned cars or forced induction. These are all stainless-steel and a direct bolt-on to your engine. Requires the Euro center section or custom exhaust after the header. (Left Hand Drive Models Only)

Part #: 784301

Price: $2,111.95 (USD)

Catalytic Converters

Catalytic Converter - E36 318i 318is 318ic 318ti - 50 State Legal (more info)

50 State Legal

This catalytic converter is a direct fit replacement to OEM, but at a third of the cost. No welding required because these bolt on to your stock exhaust manifold and muffler. Backed by a manufacturers warranty - 2 years on the catalyst and 5 years on the external pipes. Legal in all 50 states including California.

This item fits the following BMWs:
1992-1995 E36 BMW 318i 318is 318ti 318ic with M42 engine

Part #: DEC81435

Price: $379.95 (USD)

Catalytic Converter - E36 318i 318is 318ic 318ti - M42 engine (more info)

49 State Legal

This catalytic converter is a direct fit replacement to OEM, but at a third of the cost. No welding required because these bolt on to your stock exhaust manifold and muffler. Backed by a manufacturers warranty - 2 years on the catalyst and 5 years on the external pipes. Legal in all states except California. We also offer a version that is legal all 50 states including California.

This item fits the following BMWs:
1992-1995 E36 BMW 318i 318is 318ti 318ic with M42 engine

Part #: DEC1435

Price: $299.95 (USD)

Catalytic Converter - E36 318i 318is 318ti 1996-1998 (more info)

49 State Legal

This catalytic converter is a direct fit replacement to OEM, but at a third of the cost. No welding required because these bolt on to your stock exhaust manifold and muffler. Backed by a manufacturers warranty - 2 years on the catalyst and 5 years on the external pipes. Legal in all states except California. We also offer a version that is legal all 50 states including California.

This item fits the following BMWs:
1996-1998 E36 BMW 318i 318is 318ti 318ic with M44 engine

Part #: DEC71461

Price: $348.95 (USD)

Catalytic Converter - E36 318i 318is 318ti 1996-1998 - 50 State Legal (more info)

Part #: DEC91461

Price: $618.95 (USD)

Catalytic Converter - E36 323i 323is 323ic 1998-1999 (more info)

Part #: DEC71478

Price: $454.95 (USD)

Catalytic Converter - E36 323i 323is 323ic 1998-1999 (more info)

Part #: DEC91478

Price: $629.95 (USD)

Catalytic Converter - E36 325i 325is M3 1992-1995 (more info)

Part #: DEC71434

Price: $524.95 (USD)

Catalytic Converter - E36 325i 325is M3 1992-1995 - 50 State Legal (more info)

Part #: DEC81434

Price: $629.95 (USD)

Catalytic Converter - E36 328i 328is M3 - 50 state legal (more info)

50 State Legal

This direct replacement catalytic converter for BMW E36 328i 328is 328ic from 1996-1998 is 50 state legal.

Save hundreds of dollars versus an original BMW catalytic converter.

Direct Bolt-on replacement, no cutting or welding required.

50 state legal

Designed to maintain OE performance

This item fits the following BMWs:
1996-1998 E36 BMW 328i 328is 328ic M3
1999 E36 BMW 328is 328ic M3

Part #: DEC91475

Price: $949.95 (USD)

Catalytic Converter - E36 328i 328is M3 1996-1998 (more info)

49 State Legal

This catalytic converter is a direct fit replacement to OEM, but at a third of the cost. No welding required because these bolt on to your stock exhaust manifold and muffler. Backed by a manufacturers warranty - 2 years on the catalyst and 5 years on the external pipes. Legal in all states except California. We also offer a version that is legal all 50 states including California.

This item fits the following BMWs:
1996-1998 E36 BMW 328i 328is 328ic M3
1999 E36 BMW 328is 328ic M3

Part #: DEC71475

Price: $619.95 (USD)

Oxygen Sensors (O2 Sensors)

Bosch Oxygen Sensor - E30 E36 E34 E32 E31 (more info)

A new oxygen sensor can improve driveability and lengthen engine life. Ultimately, you achieve a smoother running engine that is more fuel efficient. Feedback from the oxygen sensor provides closed-loop control of the injected quantity of fuel for optimum air-fuel mixture, enabling virtually complete combustion to take place. Contaminants in gas and certain atmospheric conditions can drastically shorten the life of any oxygen sensor, therefore they should be checked with every periodic maintenance and changed if necessary. Bosch Part # 13 231.

This item fits the following BMWs:
1988-1991 E30 BMW 325i 325is 325ix 325ic
1992-1995 E36 BMW 318i 318is 318ic 318ti
1992-1995 E36 BMW 325i 325is 325ic M3
1993-1995 E34 BMW 530i
1993-3/1994 E34 BMW 540i
1993-1994 E32 BMW 740i 740il
1988-1994 E32 BMW 750il
1990-1994 E31 BMW 850i 850ci

Part #: 11781735499 (11-78-1-735-499)

Price: $88.40 (USD)

E36 OBD-II 328, M3, MZ3 Bosch Oxygen Sensors (4 required) (more info)

A new oxygen sensor set can improve driveability and lengthen engine life. Ultimately, you achieve a smoother running engine that is more fuel efficient. Feedback from the oxygen sensors provides closed-loop control of the injected quantity of fuel for optimum air-fuel mixture, enabling virtually complete combustion to take place. Contaminants in gas and certain atmospheric conditions can drastically shorten the life of any oxygen sensor, therefore they should be checked with every periodic maintenance and changed if necessary. Sold separately, but four sensors are required. Fits E36 front and rear, M Roadster / Coupe front to 2000. Bosch Part # 13 884.

This item fits the following BMWs:
1996-1999 E36 BMW 323is 323ic 328i 328is 328ic M3
1997-1998 E39 BMW 528i
1998-2002 Z3 BMW Z3 M Roadster M coupe

Part #: 11781427884 (11-78-1-427-884)

Price: $139.95 (USD)

O2 Sensor Bung and Plug (more info)

O2 Sensor Bung and plug. This weld-in bung allows an O2 sensor to be screwed into your exhaust system. It's required for custom exhaust systems, and is also useful for air/fuel ratio measurements when dyno testing. A threaded plug is included to cap off when not in use. Bung and cap/plug are both 100% stainless steel. The bung and plug are also available separately (in case you don't need both). Simply choose your option below.

TMS Oxygen Sensor Bung Specs:

Material 304 stainless steel
1.00" / 25.4mm OD
0.50" / 12.7mm Tall
Thread size and pitch M18x1.5

TMS O2 Sensor Plug & Crush Ring Specs

Material 304 stainless steel
10mm female hex for install and removal
Thread size and pitch M18x1.5
Copper Crush Ring for leak free installation

Install Tips

Locate bung as close to engine a possible, without exceeding the maximum operating temperature for the O2 sensor. The suggested location is just down-stream of the merge-collector on each bank of cylinders.
Sensors located after upstream exhaust system leaks or too close to exhaust outlets are susceptible to poor readings or influence of ambient air
O2 Sensors exposed to exhaust gasses with too high amount of un-burnt fuel can lead to misleading readings. A possible lean reading.
Locate sensor/bung 90° to exhaust gas stream.
Locate sensor/bung in tube with a minimum of 10° up angel to prevent liquid build up in sensor element.
Use stainless steel welding wire or rod when installing bung.
Do not have bung plug or a oxygen sensor installed when welding bung in place.
Welding can distort the bung so it is recommended you chase/tap the threads of the bung after welding.
When installing O2 sensor or plug, use an O2 sensor compatible high temperature resistant grease on the threads.
Use tightening torque suggested by O2 senor manufacturer.

Part #: TEN9949O2S

Price: $18.50 (USD)

Exhaust Hangers and Gaskets

Acousti/Seal Exhaust System Sealing Compound - 5oz Tube (more info)

With years of experience with dealing with exhaust systems of all kinds, we've found this product to be the BEST at fixing or preventing exhaust leaks. Just apply a light coating of Acousti/seal to pipes, flanges or slip-fit clamps before assembly for a leak free installation. 5 ounce tube (142 grams).

Part #: 35959

Price: $19.95 (USD)

E36 Exhaust Hanger and Gasket Kit (more info)

The E36 Exhaust Hanger and Gasket Kit includes two rear muffler hangers, two catalytic converter hangers, both gasket rings and all necessary hardware.

Part #: E36HANGERKIT

Price: $106.00 (USD)

E36 M3 & E46 M3 Rubber Exhaust Hanger (more info)

This is the rubber hanger used to support the rear muffler on all 1995-1999 M3s. It is also used on the 2001-2006 E46 M3 (there are three used on the E46 M3, so be sure to order enough for your needs).

This rubber exhaust hanger fits the following BMWs:
1995-1999 E36 M3 coupe, sedan & convertible
2001-2006 E46 M3 coupe & convertible

Part #: 18201401797 (18-20-1-401-797)

Price: $29.95 (USD)

E36 Rubber Exhaust Hanger (non-M) (more info)

This is the rubber exhaust hanger that supports the rear muffler on non-M E36 3 series from 1992-1999. It fits 318i/is/iC 1992-1995, 325i/is/iC 1992-1995, and 328i/is/iC 1996-1999.

Part #: 18211723101 (18-21-1-723-101)

Price: $35.25 (USD)

Exhaust Gasket - E36 M3, E46 M3, Z3M, Z4M (more info)

This is the exhaust gasket seal ring.

This item fits the following BMWs:
1996-1999 E36 BMW M3
2001-2006 E46 BMW M3
1998-2002 Z3 BMW M Roadster M Coupe
2006-2008 E85 BMW Z4 M Roadster M Coupe

Part #: 18111723379

Price: $7.50 (USD)

Exhaust Manifold Gasket - M50 & S50 Engines (more info)

This exhaust manifold gasket fits 2.5 liter 6 cylinder engines from 1992-1995, 1995 3.0 liter M3, and all 4 cylinder engines from 1990-1999 (M42 & M44).

It fits all 1992-1995 325i & 325is (E36), 1995 M3 3.0, 1991-1995 525i (E34), 318i/is/ti 1990-1995 (E30 & E36) and Z3 1.9 liter.

These are sold individually. 3 are required for 6 cylinder (M50/S50) and 2 are required for 4 cylinder (M42 & M44).

Part #: 11621728983 (11-62-1-728-983)

Price: $8.40 (USD)

Exhaust Manifold Gasket - M52 & S52 Engines (more info)

This exhaust manifold gasket fits 2.8 and 3.2 liter engines, as came on all 1996-1999 M3, 328i/is & 323is (E36), 1997-2000 528i (E39), and Z3 2.8 liter. These are sold individually, and 2 are required for each car.

Part #: 11621744252 (11-62-1-744-252)

Price: $11.10 (USD)

Exhaust Rubber Hanger - E21 E30 E24 E28 Z3 (more info)

This is the circular rubber exhaust hanger to suspend the exhaust from the chassis.

This item fits the following BMWs:
1977-1983 E21 BMW 320i
1984-1991 E30 BMW 318i 318is 318ic 325e 325es 325i 325ic 325is 325ix M3
1994-1998 E36 BMW 318ti
1976-1981 E12 BMW 528i 530i
1982-1988 E28 BMW 524td 528e 533i 535i 535is M5
1982-1989 E24 BMW 633csi 635csi M6
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.8 M Roadster M Coupe

Part #: 18211105635 (18-21-1-105-635)

Price: $3.95 (USD)

M50/M52 Exhaust Manifold to Cat Gasket (more info)

M50/M52 Exhaust Manifold to Catalytic Converter Gasket. 2 needed per car. Fits all cars with M50 and M52 engines.

Part #: 18301716888 (18-30-1-716-888)

Price: $10.40 (USD)

M50/M52/S50/S52 6 Cylinder Head to Exhaust Manifold Stud & Nut Kit (more info)

This convenient kit includes all the hardware you need to replace your old, rusted (or broken?) exhaust manifold studs on your M50-family engine's head (including M50, M52, S50, S52). The perfect time to preventatively replace your exhaust studs is anytime you remove the manifolds (perhaps to install headers) or are removing the head or complete engine. Kit includes the correct number of OEM studs, copper locking nuts, and also includes two jam-nuts to be used for removing your old studs and installing the new studs. This stud and nut kit Fits 325i, 325is, 328i, 328is, 323is, E36 M3 (3.0 & 3.2 liter), E34 525i (91+), E39 528i, Z3 2.8.

This item fits the following BMWs:
1992-1998 E36 BMW 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1991-1995 E34 BMW 525i
1997-1998 E39 BMW 528i
1997-1998 Z3 BMW Z3 2.8 M Roadster M Roadster

Part #: TEN3649SK1

Price: $79.95 (USD)