 |
E36 M3, M Roadster, Coupe Fixed Camber Plates
(more info)
 Increasing the negative camber of your E36M3/MZ3 will reduce understeer and prolong the life of your tires when used on the track. These plates simply bolt on top of the factory upper strut bearings of your M car and will increase negative camber by 2º. Vehicle height in the front will be raised by .25”. Material has also been added to increase stiffness of contact area, therefore reducing the strut tower deformation and increasing the strength of the strut towers. Fixed mount camber plates are legal for all BMWCCA classes and many SCCA classes. This is a simple bolt on part.
 Click
here for installation instructions.
|
| Part #: TSU3680455 |
| Price: $139.95 (USD) |
|
|
|
|
|
|
|
 |
KMAC E36(not ti)/ E36M3 , E46 inc M3, Z4, Z8 Rear Camber Kit
(more info)
Perfect for lowered cars that need to dial out negative camber to preserve tires. Also perfect for track cars - easily dial in toe and camber for the track for better handling. Priced per set. (Not for 318ti)
This item fits the following BMWs:
1992-1998 E36 BMW 318i 318is 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
2003-2008 Z4 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
2000-2003 E52 BMW Z8
|
| Part #: 192426 |
| Price: $269.95 (USD) |
|
|
|
|
 |
KMAC Front Camber/Caster Plates (Pair) - Stage 2 (Street/Race) - Fit most BMWs, See Chart
(more info)
This Stage 2 kit is recommend for street / race use. Manufactured from aluminum alloy, it includes a pillowball and urethane bushings. These weigh in at only 2.2 lbs (1 kilo), so they are lightweight. Adjustments can be made very easily, with NO JACKING or disassembly necessary! These plates provide up to three degrees of negative camber. Great for driving schools and some race applications.
This kit fits the following BMWs:
E36 3 series, from 6/92 to 1999 (sedan, coupe & convertible) - including 318, 323, 325, 328, & M3
E46 3 series 1999-2005 - 323i, 323Ci, 325i, 325xi, 325Ci, 328i, 328Ci, 330i, 330xi, 330Ci (no M3!)
E90 3 series sedan 2006+ - 325i, 328i, 330i, 335i
E91 3 series wagon 2006+ - 325i, 328i, 330i, 335i
E92 3 series coupe 2007+ - 328i, 335i
E39 5 Series - 528i 1997-2003, and 540i 1997 (only)
E39 5 Series - 525i, 530i 2001-2003 - Not for EDC Equipped Cars
E60 5 series 2004+ - 525i, 530i, 528i, 545i, 550i (no M)
E63/E64 6 series 2004+ - 645i, 650i coupe & convertible
Z3 Roadster/Coupe 1996-2002 - All
MZ3 Roadster/Coupe 1998-2002 - ///M Roadster Coupe
Z4 Roadster/Coupe 2003+ - 2.5i, 3.0i, 3.0si
Z8 Roadster - All
|
| Part #: 192416k2 |
| Price: $339.95 (USD) |
|
|
|
|
 |
KMAC Front Camber/Caster Plates (Pair) - Stage 3 (Full Race) - most BMWs
(more info)
This Stage 3 kit is recommend for race & track use only. Manufactured from aluminum alloy, it includes a pillowball which allows for NO FLEX, and makes for quicker response. These weigh in at only 2.2 lbs (1 kilo), so they are lightweight. Adjustments can be made very easily, with NO JACKING or disassembly necessary! These plates provide up to three degrees of negative camber. Not for street use.
This kit fits the following BMWs:
E36 3 series, from 6/92 to 1999 (sedan, coupe & convertible) - including 318, 323, 325, 328, & M3
E46 3 series 1999-2005 - 323i, 323Ci, 325i, 325xi, 325Ci, 328i, 328Ci, 330i, 330xi, 330Ci (no M3!)
E90 3 series sedan 2006+ - 325i, 328i, 330i, 335i
E91 3 series wagon 2006+ - 325i, 328i, 330i, 335i
E92 3 series coupe 2007+ - 328i, 335i
E39 5 Series - 528i 1997-2003, and 540i 1997 (only)
E39 5 Series - 525i, 530i 2001-2003 - Not for EDC Equipped Cars
E60 5 series 2004+ - 525i, 530i, 528i, 545i, 550i (no M)
E63/E64 6 series 2004+ - 645i, 650i coupe & convertible
Z3 Roadster/Coupe 1996-2002 - All
MZ3 Roadster/Coupe 1998-2002 - ///M Roadster Coupe
Z4 Roadster/Coupe 2003+ - 2.5i, 3.0i, 3.0si
Z8 Roadster - All
|
| Part #: 192416k3 |
| Price: $339.95 (USD) |
|
|
|
|
 |
KMAC Front Camber/Caster Plates (Pair) - Stage I (Street/Semi Race) - Fit most BMWs, See Chart
(more info)
This Stage I kit is recommend for street / semi-race use, and daily driven vehicles. Manufactured from steel, it includes urethane bushings and ball race thrust bearings for long life, commuter use. Adjust easily – there is no jacking or disassembly necessary! These plates provide up to three degrees of negative camber. Perfect for driving schools.
This kit fits the following BMWs:
E36 3 series, from 6/92 to 1999 (sedan, coupe & convertible) - including 318, 323, 325, 328, & M3
E46 3 series 1999-2005 - 323i, 323Ci, 325i, 325xi, 325Ci, 328i, 328Ci, 330i, 330xi, 330Ci (no M3!)
E90 3 series sedan 2006+ - 325i, 328i, 330i, 335i
E91 3 series wagon 2006+ - 325i, 328i, 330i, 335i
E92 3 series coupe 2007+ - 328i, 335i
E39 5 Series - 528i 1997-2003, and 540i 1997 (only)
E39 5 Series - 525i, 530i 2001-2003 - Not for EDC Equipped Cars
E60 5 series 2004+ - 525i, 530i, 528i, 545i, 550i (no M)
E63/E64 6 series 2004+ - 645i, 650i coupe & convertible
Z3 Roadster/Coupe 1996-2002 - All
MZ3 Roadster/Coupe 1998-2002 - ///M Roadster Coupe
Z4 Roadster/Coupe 2003+ - 2.5i, 3.0i, 3.0si
Z8 Roadster - All
|
| Part #: 192416 |
| Price: $314.95 (USD) |
|
|
|
|
 |
Turner Motorsport E36 Adjustable Front Camber Plates (pair)
(more info)
The custom-made TMS adjustable camber plates for the E36 provide up to 4 degrees of negative camber. These beautifully made aluminum camber plates have solid no-play spherical bearings that are ideal for racing or high performance track events. These camber plates are nearly identical to the BMW Motorsport version with a few TMS improvements (including the price). These units replace the rubber upper strut bearing and are easily adjusted by loosening the 3 factory nuts and sliding the camber plate in and out. Because of the clearances between the spring and the body of the car these are suggested for use with coil-over front struts only, using a 60mm, 2.25" or 2.5" ID race spring.
This item fits the following BMWs:
1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
|
| Part #: TSU3680001 |
| Price: $349.95 (USD) |
|
|
|
|
 |
Vorshlag Front Camber Plates for E36 (non-M) Bilstein Coilovers
(more info)
These Vorshlag front camber plates are built especially for the Bilstein PSS/PSS9 Coil Over suspension in the E36 3-series. Constructed from aluminum with a double-row bearing, these plates are designed to adjust camber and caster independently. They are a direct fit to the Bilstein suspension's 60mm springs and the perfect tool for fine-tuning handling for autocross or track. Or dial out camber to account for tire wear on the street.
Vorshlag Camber Plates are built with several key features that make them among the best in the industry -
Direct installation with no cutting, slotting, or modification needed on the car.
Adjusts with basic hand tools from under the hood.
Maximizes suspension travel.
Double-row bearing for longer life.
Large center bearing to handle tough loads.
Anodized or plated pieces for the best corrosion protection.
This item is only intended for E36 non-M cars with the Bilstein PSS or PSS9 suspension. If you need a camber plate for another application please contact us.
This item fits the following BMWs with PSS/PSS9 coil overs:
1993-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic
|
| Part #: V36-PSS |
| Price: $464.00 (USD) |
|
|
|
|
|
Vorshlag Front Camber Plates for E36 KW Coilovers
(more info)
These Vorshlag front camber plates are built especially for the KW Coil Over suspension in the E36 3-series. Constructed from aluminum with a double-row bearing, these plates are designed to adjust camber and caster independently. They are a direct fit to the KW suspension's 60mm springs and the perfect tool for fine-tuning handling for autocross or track. Or dial out camber to account for tire wear on the street.
Vorshlag Camber Plates are built with several key features that make them among the best in the industry -
Direct installation with no cutting, slotting, or modification needed on the car.
Adjusts with basic hand tools from under the hood.
Maximizes suspension travel.
Double-row bearing for longer life.
Large center bearing to handle tough loads.
Anodized or plated pieces for the best corrosion protection.
This item is only intended for E36 cars with a KW V1, V2, V3, or Clubsport suspension. If you need a camber plate for another application please contact us.
This item fits the following BMWs with KW coil overs:
1993-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
|
| Part #: V36-KW-04 |
| Price: $439.00 (USD) |
|
|
|
|
 |
Vorshlag Front Camber Plates for E36 M3 Bilstein PSS9 Coilovers
(more info)
These Vorshlag front camber plates are built especially for the Bilstein PSS/PSS9 Coil Over suspension in the E36 M3. Constructed from aluminum with a double-row bearing, these plates are designed to adjust camber and caster independently. They are a direct fit to the Bilstein suspension's OEM-type springs and the perfect tool for fine-tuning handling for autocross or track. Or dial out camber to account for tire wear on the street.
Vorshlag Camber Plates are built with several key features that make them among the best in the industry -
Direct installation with no cutting, slotting, or modification needed on the car.
Adjusts with basic hand tools from under the hood.
Maximizes suspension travel.
Double-row bearing for longer life.
Large center bearing to handle tough loads.
Anodized or plated pieces for the best corrosion protection.
This item is only intended for E36 M3s with the Bilstein PSS9 suspension. If you need a camber plate for another application please contact us.
This item fits the following BMWs with PSS9 coil overs:
1995 E36 BMW M3
1996-99 E36 BMW M3
|
| Part #: VORSHLAG-E36M3-PSS9 |
| Price: $499.00 (USD) |
|
|
|
|
|
KMAC / Turner Camber Kits / Caster Plates
