Contact YouTube Blog Twitter facebook Turner Motorsport on Instagram
1-800-280-6966
Login   |

0 item(s) in your Shopping Cart
Language:
Currency:
VAT Mode:
Get notified about money saving
specials & deals for your BMW
enter your email address
  • 18 years of BMW Tuning.
  • Award winning service.
  • 1,000's of parts in stock.
  • Quality BMW Parts only.
  • Hassle-free returns.

  • Find us on Facebook


    BMW E36 Suspension Bushings & Mounts

    Suspension mounts are designed to absorb the energy of the shocks and springs and isolate road harshness from the chassis. But over time the original rubber mounts will crumble and fail. We have stock mounts and bushings as well as a wide selection of upgraded and heavier-duty for performance street cars. We also offer a full selection of race only bushings and mounts. Simply choose your car below. Included here you will find rear shock tower mounts, front strut mounts, subframe mounts, lower control arm bushings, rear trailing arm bushings, and more.
    You're currently viewing parts for your (E36) 3-series 1992-1999. Reset your chassis
    For accurate results, specify your year and model below.
    OEM or Upgraded Rubber Mounts and Bushings to Restore Precision and Comfort
    Turner Motorsport has focused on the needs of weary E36 owners by coming up with this upgraded bushing package for the rear suspension/subframe. With the bushings being so critical in the E36, keeping up with the maintenance of these parts will do wonders for the ride/handling. This package covers all of the bushings in the rear suspension – it’s everything in one box! Buy as a package and save $$.

    Package includes:
  • rear subframe mounts (stock M3 bushings - upgrade for non-M cars)
  • rear trailing arm bushings with TMS limiters
  • inner camber arm bushings
  • Outer camber arm bushings
  • inner upper spring arm bushings
  • Outer upper spring arm bushings
  • differential mounts (TMS solid type, safe for street use)
  • rear shock mounts with TMS reinforcments


  • Wherever possible we upgraded each of these bushings to provide better handling or make them last longer. These bushings are all designed for street use but most of them are upgrades of the original bushings. We also sell solid Delrin or aluminum bushings but they should only be used for track cars and only as a kit with other solid mounts. Individual items available of course, click here.

    We also sell replacement front control arms and bushings. These should not be overlooked!

    Part #: E36REARBUSHINGS
    Price: $806.62 (USD) 
    Quantity:   
    Rear Suspension Mounts With No Flex or Deflection for Improved Handling, Response, and Long Life
    Building a track-only or racecar means swapping out the flexible rubber bushings and mounts for non-distorting solid pieces. The stock rubber bushings have serious drawbacks when used hard on the racetrack - they wear out quickly, and the flexible material allows extreme changes in alignment. Switching to solid bushings will eliminate the deflection and flex, keeping the suspension motions in their intended alignment and providing more feedback to the driver. On the E36, solid bushings can help prevent rear subframe failure as the sheetmetal chassis will no longer flex along with the rubber mount. Depending on the bushing's intended purpose, the material we use is either aluminum or Delrin. Delrin is a dense plastic material that has almost zero deflection and long life. It's self-lubricating so it won't ever need grease or lube. All of our bushings are designed by our in-house R&D engineers and tested on our various racing cars, with many used in professional racing series around the world.

    If you're building a car for a racing class, the parts and materials you can change to are specified in the rules. Consult your rulebook or tech steward for any clarification. As these bushings have no play or deflection in them, they are not intended for street-focused cars - they do not absorb impacts and vibration like rubber will.

    We offer bushings for the following suspension points -
    subframe mounts x 4 (aluminum)
    inner-upper control arm bushings x 2 (aluminum with bearing)
    differential mounts x 3 (1 Delrin, 2 aluminum)
    outer upper/lower control arm bushings x 4 (OE-spec replacements) (steel with bearing)
    trailing arm bushings (RTABs) x 2 (aluminum with bearing or Delrin)
    suggested: front control arm bushings (FCABs) (Delrin)
    suggested: rear shock mounts (RSMs) x 2 (aluminum with bearing)

    Notes
    Note 1: there is also a inner-lower camber arm bushing. We never developed a solid bushing for this point because every racing class allows adjustable camber arms to be used in this location and we offer those with solid inner bushings.
    Note 2: some racing classes require a non-bearing bushing for the rear trailing arm bushings. In cases like this, we use a Delrin bushing.
    Note 3: the outer upper and lower bushings are already a monoball-style bearing from the factory on all M3 models. They are a great design and last a long time. We offer them as direct replacements or as upgrades for the non-M3 models.

    This item fits the following BMWs:
    1992-1998 E36 BMW 318i 318is 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
    Part #: E36REARSOLIDBUSHINGS
    Price: $0.00 (USD) 
    The E36 3 Series Strut/Shock Mount Kit includes two OEM front strut tower mounts with bearings, two front strut reinforcement plates, front strut tower paper gaskets, two rear shock tower reinforcement plates, ten M8 13mm head Nyloc nuts, a pair of rear shock tower mount gaskets and your choice of three different rear shock mounts. 

    You can choose from the HD OEM Rear Mounts, the "Repair Shop" Lifetime Warranty Mounts, or the High Performance Aluminum & Rubber Mounts.  Any of these mounts are suitable for street use, we recommend the Performance Aluminum & Rubber Mounts for coil-over suspensions or for cars that see a lot of track use. 

    When you replace spring or shocks & struts in your car, these mounts must be removed and reinstalled anyway. Do it at the same time you replace shocks to save yourself the the increased labor time if they go bad soon after shock/strut install.

    Choose your product options below.


    This item fits the following BMWs:
    1994-1998 E36 BMW 318ic 323ic 325ic 328ic M3 Convertible
    Part #: E36ICMOUNTKIT
    Price: $216.00 (USD) 
    This strut and shock mount package covers the front and rear rubber mounts and bushings commonly replaced during a strut and shock install. While you're installing new front struts and rear shocks these are easily installed - there's no additional labor and special tools are not required. Since these pieces are mostly rubber, they dry up and crack over time. Re-using them lead to problems with fitment or noise, and may have safety issues as well. These mounts and pads are the perfect complement to your new shocks to help restore your car's handling and performance.

    We sell the basic strut and shock mount package, which includes:
  • Front strut mounts (also known as guide support)
  • Front strut reinforcement plates (to prevent cracking and deforming of the front strut towers)
  • Front strut tower paper washer gaskets
  • Front and rear self-locking mounting nuts
  • Rear Lifetime Warranty 'Repair Shop' shock mounts
  • Rear shock mount reinforcements (to prevent cracking of shock towers)
  • Rear shock mount gaskets

  • In addition, you can add the front spring pads, front bump stops, front dust boots, rear bump stops, and rear dust boots if needed. But please note that some shocks and coil overs come with all or some of these pieces already. If in doubt, check with your supplier on what is included.

    We offer three varieties of the rear shock mounts - OEM, Repair Shop, and HP alum-rubber. We recommend either the Repair Shop or HP mounts because the stock OEM design has a flaw that can lead to premature failure of the mounts. The Repair Shop and HP mounts use a different design that will last longer and the Repair Shop mounts also have a lifetime warranty!

    This item fits the following BMWs:
    1995 E36 BMW M3
    Part #: E36M3MOUNTKIT-95
    Price: $358.05 (USD) 
    This strut and shock mount package covers the front and rear rubber mounts and bushings commonly replaced during a strut and shock install. While you're installing new front struts and rear shocks these are easily installed - there's no additional labor and special tools are not required. Since these pieces are mostly rubber, they dry up and crack over time. Re-using them lead to problems with fitment or noise, and may have safety issues as well. These mounts and pads are the perfect complement to your new shocks to help restore your car's handling and performance.

    We sell the basic strut and shock mount package, which includes:
  • Front strut mounts (also known as guide support)
  • Front strut reinforcement plates (to prevent cracking and deforming of the front strut towers)
  • Front strut tower paper washer gaskets
  • Front and rear self-locking mounting nuts
  • Rear Lifetime Warranty 'Repair Shop' shock mounts
  • Rear shock mount reinforcements (to prevent cracking of shock towers)
  • Rear shock mount gaskets

  • In addition, you can add the front spring pads, front bump stops, front dust boots, rear bump stops, and rear dust boots if needed. But please note that some shocks and coil overs come with all or some of these pieces already. If in doubt, check with your supplier on what is included.

    We offer three varieties of the rear shock mounts - OEM, Repair Shop, and HP alum-rubber. We recommend either the Repair Shop or HP mounts because the stock OEM design has a flaw that can lead to premature failure of the mounts. The Repair Shop and HP mounts use a different design that will last longer and the Repair Shop mounts also have a lifetime warranty!

    This item fits the following BMWs:
    1996-1999 E36 BMW M3
    Part #: E36M3MOUNTKIT-96
    Price: $302.05 (USD) 
    The E36 3 Series Strut/Shock Mount Kit includes two OEM front strut tower mounts with bearings, two front strut reinforcement plates, two front strut tower paper washer gaskets, two rear shock tower reinforcement plates, ten M8 13mm head Nyloc nuts, a pair of rear shock tower mount gaskets and your choice of three different rear shock mounts. 

    You can choose from the HD OEM Rear Mounts, the "Repair Shop" Lifetime Warranty Mounts, or the High Performance Aluminum & Rubber Mounts.  Any of these mounts are suitable for street use, we recommend the Performance Aluminum & Rubber Mounts for coil-over suspensions or for cars that see a lot of track use. 

    When you replace spring or shocks & struts in your car, these mounts must be removed and reinstalled anyway. Do it at the same time you replace shocks to save yourself the the increased labor time if they go bad soon after shock/strut install.

    Choose your product options below.


    This item fits the following BMWs:
    6/1992-1998 E36 BMW 318i 318is 318ti 323is 325i 325is 328i 328is - not for convertibles
    1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i
    Part #: E36MOUNTKIT
    Price: $202.05 (USD) 
    Let's face it, the E36 is an old chassis but it's still the most popular car to build for track-use. But because of it's age, certain parts of the chassis are prone to structural failure. We've been racing the E36 for over ten years so we know what the weak points are and how to make them stronger. Included with this package are the reinforcement kits that are absolutely necessary for a car that sees any time on the track. Street cars will also benefit from these pieces as your car can take almost as much of beating on the road as on the racetrack. Buy as a package and save 10%! Package includes reinforcements for the following areas:

  • front subframe
  • front strut towers
  • front strut tower paper gaskets
  • rear sway bar / swaybar tabs
  • rear shock towers
  • rear subframe
  • rear camber arms (optional)

  • This item fits the following BMWs:
    1992-1998 E36 BMW 318i 318is 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic - Not M3
    Part #: T36REINF
    Price: $260.45 (USD) 
    Made in the USA A very common weak point on the 3 series BMW is the sheetmetal of the rear shock tower. The sheetmetal here is relatively thin and very susceptible to stress and fatigue. A worn out shock will bottom-out more often and this energy is transferred through the bump stop and into the metal chassis. Stiffer shocks and shock mounts also put more stress on the sheetmetal. Factor in age, mileage, and environmental conditions and it's not a surprise that we see shock tower failures often. BMW addressed this issue with reinforcements of their own but our's are thicker for additional strength. This kit mounts on top of the shock tower and can either be bolted or welded in place. Because of the shape of the rear shock tower, these do not fit cabrio/convertible cars.

    This item fits the following BMWs:
    1992-1999 E36 BMW 318i 318is 318ti 323is 325i 325is 328i 328is M3 - not for convertibles
    1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3 - not for convertibles
    Part #: TSU9975100
    Price: $31.95 (USD) 
    Quantity:   
    The shock towers on the E36 and Z3 are notoriously weak. Under normal driving conditions with a stock, fresh suspension it is unlikely that you will ever have a problem. But with an upgraded street or race suspension with firm springs much of the energy from pounding the road is transmitted to the thin sheet metal in the strut tower. This pounding will cause the tower to deform or even crack. Look for 'mushrooming' or deformity around the holes for the three mounting studs at the top of the strut tower. The sheetmetal around the holes should really be flat and square. Poor shocks or stiff suspensions will actually cause this sheetmetal to pop up.

    These factory BMW reinforcement plates will help disperse the energy and save you from costly repairs in the future. A strut brace also helps to prevent this but these plates are designed to reinforce the strut tower from the bottom. The install over your strut mount or camber plate and simply add thickness (strength) to the strut tower. They can be sandwiched in place and do not require welding. BMW part number 31312489795

    This item fits the following BMWs:
    1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
    1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe. Note: some Z3 models already come from the factory with these plates.
    Part #: 31312489795K
    Price: $33.90 (USD) 
    For convenience, we have assembled this bushing carrier bracket kit, to save you time when changing our control arm bushings. It includes two bushing carriers (one left, one right) and mounting bolts. Having a spare set means you can get your new bushings pre-installed and ready to go on the car (perhaps as a race/track spare?) without having to remove your current brackets and take them to the shop to press out of the old bushing and press the new ones in.

    This kit includes the following items:
    1 x 31121139789 - Control Arm Bushing Bracket - Left
    1 x 31121139790 - Control Arm Bushing Bracket - Right
    4 x 31111143348 - Flat Washer
    4 x 31111137888 - Bolt


    This item fits the following BMWs:
    1984-1991 E30 BMW 318i 318is 318ic 325e 325es 325i 325ic 325is 325ix M3
    1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
    1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Roadster
    Part #: TSU9995PB3
    Price: $98.95 (USD) 
    Quantity:   
    Made in the USARubber control arm bushings are designed to flex and absorb energy. That’s fine on a streetcar but on an all-out racing machine you want your alignment to stay constant. We have picked Delrin for this application due to its high rigidity and low coefficient of friction allowing for minimal suspension bushing deflection (geometry change) but decreasing bushing windup or drag (friction). They are not recommended for street-use but highly-recommended for track cars. They will work on all E30, E36, and Z3 models. Stainless steel set screws included.

    For convenience, we carry spare bushing carrier brackets (part# TSU9995PB3, see illustation above) and can pre-install your bushings into the carriers, if you choose. This will save you from needing specialty tools (including a hydraulic press, drills, and taps) and will allow you (or your mechanic) to perform the install much quicker. If you'd like to purchase the carriers, be sure to select that option with the drop-down menu below.
    Part #: TSU3080202
    Price: $89.95 (USD) 
    Anytime that you replace your front control arms you must replace your control arm bushings. The reason is because it’s hard to tell if you’re bushings are really bad and they are often destroyed when removed. These are the control arm bushings from the 1996-1999 E36 M3 and have the hole in the center.

    These are the stock bushings bushings from the 1996-99 E36 M3 and MZ3 but are a great upgrade for any E30 - 318/325, E36 - 325/323/328, and Z3 -1.9, 2.3, 2.5, 2.8, 3.0. They have more rubber than the non-M stock bushings. We have found the increased volume of rubber helps the bushings last longer and have better steering response due to less deflection of the bushing. These bushings can actually help reduce vibrations produced by the mass of larger wheels or brakes.

    For convenience, we carry spare bushing carrier brackets (part# TSU9995PB3, see illustation above) and can pre-install your bushings into the carriers, if you choose. This will save you from needing a hydraulic press and will allow you (or your mechanic) to perform the install much quicker. This is especially useful if you want to have a set of race or track spares, ready to go. If you'd like to purchase the carriers, be sure to select that option with the drop-down menu below (sorry, no returns accepted on pre-assembly labor fee, please).


    This item fits the following BMWs:
    1984-1991 E30 BMW 318i 318is 318ic 325e 325es 325i 325ic 325is
    1992-1999 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic
    1996-1999 E36 BMW M3
    1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Coupe M Roadster
    Part #: 31129069035
    Price: $49.95 (USD) 
    Made in the USAThese bushings have the hole off-center to give your car a little more track, caster, and camber. This style came as standard equipment on E30 M3s (8/89-later) and 1995 E36 M3 but will work with any E30, E36, Z3.

    Rubber control arm bushings are designed to flex and absorb energy. That’s fine on a streetcar but on an all-out racing machine you want your alignment to stay constant. We have picked Delrin for this application doe to its high rigidity and low coefficient of friction allowing for minimal suspension bushing deflection (geometry change) but decreasing bushing windup or drag (friction). They are not recommended for street-use but highly-recommended for track cars. They will work on all E30, E36, and Z3 models. Stainless steel set screws included.

    For convenience, we carry spare bushing carrier brackets (part# TSU9995PB3, see illustation above) and can pre-install your bushings into the carriers, if you choose. This will save you from needing specialty tools (including a hydraulic press, drills, and taps) and will allow you (or your mechanic) to perform the install much quicker (sorry, no returns accepted on pre-assembly labor fee, please). If you'd like to purchase the carriers, be sure to select that option with the drop-down menu below (sorry, no returns accepted on pre-assembly labor fee, please).
    Part #: TSU3080D30
    Price: $89.95 (USD) 
    Anytime that you replace your front control arms (which should be often), you must replace your control arm bushings. The reason is because it’s hard to tell if you’re bushings are really bad and they are often destroyed when removed. These bushings have the hole off-center to give your car a little more track, caster, and camber. They are a solid rubber bushing that is great for the street. These came as standard equipment on E30 M3s (8/89-later) and 1995 E36 M3s.

    For convenience, we carry spare bushing carrier brackets (part# TSU9995PB3, see illustation above) and can pre-install your bushings into the carriers, if you choose. This will save you from needing a hydraulic press and will allow you (or your mechanic) to perform the install much quicker. This is especially useful if you want to have a set of race or track spares, ready to go. If you'd like to purchase the carriers, be sure to select that option with the drop-down menu below (sorry, no returns accepted on pre-assembly labor fee, please).

    This item fits the following BMWs:
    1984-1991 E30 BMW 318i 318is 318ic 325e 325es 325i 325ic 325is M3
    1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
    1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
    Part #: 31129064875
    Price: $47.95 (USD) 
    Standard front control arm bushing made by an OEM supplier. Price is for the pair.

    For convenience, we carry spare bushing carrier brackets (part# TSU9995PB3, see illustation above) and can pre-install your bushings into the carriers, if you choose. This will save you from needing a hydraulic press and will allow you (or your mechanic) to perform the install much quicker. This is especially useful if you want to have a set of race or track spares, ready to go. If you'd like to purchase the carriers, be sure to select that option with the drop-down menu below (sorry, no returns accepted on pre-assembly labor fee, please).
    Part #: 31129059288
    Price: $29.95 (USD) 
    Anytime that you replace your front control arms (which should be often), you must replace your control arm bushings. The reason is because it’s hard to tell if you’re bushings are really bad and they are often destroyed anyway when removed. These bushings are made in Germany and include the control arm bushing bracket which saves an enormous amount of time and work pressing bushings out/in. These are the standard front control arm bushings with the alignment hole in the center. Mounting bolts included (10.9 grade steel).

    Position: Left/Driver's side

    This item fits the following BMWs:
    1984-1991 E30 BMW 318i 318is 318ic 325e 325es 325i 325ic 325is
    1992-1999 E36 BMW 318i 318is 318ic 323is 323ic 325i 325ic 325is 328i 328is 328ic
    1996-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0
    Part #: 31121136531MY
    Price: $52.95 (USD) 
    Quantity:   
    Anytime that you replace your front control arms (which should be often), you must replace your control arm bushings. The reason is because it’s hard to tell if you’re bushings are really bad and they are often destroyed anyway when removed. These bushings are made in Germany and include the control arm bushing bracket which saves an enormous amount of time and work pressing bushings out/in. These are the standard front control arm bushings with the alignment hole in the center.

    Position: Right/Passenger's side

    This item fits the following BMWs:
    1984-1991 E30 BMW 318i 318is 318ic 325e 325es 325i 325ic 325is
    1992-1999 E36 BMW 318i 318is 318ic 323is 323ic 325i 325ic 325is 328i 328is 328ic
    1996-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0
    Part #: 31121136532MY
    Price: $52.95 (USD) 
    Quantity:   
    The strut mounts (or guide support) locate the front strut to the chassis of the car. They are a very durable rubber meant to absorb vibration and impacts from bumps, potholes, etc. There is also a bearing inside that allows the strut shaft to turn independent of the rest of the suspension. Therefore, the front strut mount is a very critical piece on the E36 suspension. These mounts generally last 100,000 miles or more but it would be a good idea to change them with every strut replacement. Alternate part number - 31336779613 .
    Price is per mount. Left and Right are the same part.

    This item fits the following BMWs:
    1992-1999 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic
    Part #: 31331092885
    Price: $39.95 (USD) 
    Quantity:   
    The upper strut mount (also known as a guide support) is what the front strut uses to attach to the body of the car. It's a rubber-isolated bearing that absorbs a lot of impact harshness and vibration from the strut and also allows the strut shaft to turn independent of the rest of the suspension. It's an essetial piece to the front suspension and should not be overlooked when replacing your front struts.

    Price is per mount. Left and Right sides are the same part.

    This item fits the following BMWs:
    1995 E36 BMW M3
    Part #: 31332228345
    Price: $117.95 (USD) 
    Quantity:   
    The upper strut mount provides a locating point for the top of the front struts. It contains a rubber-isolated bearing that allows the strut shaft to move independently from the rest of the suspension - a critical component for the suspension to be quiet and effective. The rubber also absorbs vibrations and impact harshness, helping to keep unwanted noise and harshness from reaching the steering wheel.

    Price is per mount. This is the LEFT side (Driver's) mount.

    This item fits the following BMWs:
    1996-1999 E36 BMW M3
    1998-2002 Z3 BMW M Roadster M Coupe
    Part #: 31332227897
    Price: $89.95 (USD) 
    Quantity:   
    The upper strut mount provides a locating point for the top of the front struts. It contains a rubber-isolated bearing that allows the strut shaft to move independently from the rest of the suspension - a critical component for the suspension to be quiet and effective. The rubber also absorbs vibrations and impact harshness, helping to keep unwanted noise and harshness from reaching the steering wheel.

    Price is per mount. This is the RIGHT side (Passenger's) mount.

    This item fits the following BMWs:
    1996-1999 E36 BMW M3
    1998-2002 Z3 BMW M Roadster M Coupe
    Part #: 31332227898
    Price: $89.95 (USD) 
    Quantity:   
    This rear shock bump stop is designed for use on cars with lowered suspensions. The bump stop itself is shorter than the stock bump stop to allow for extra travel.

    This item fits the following BMWs:
    1992-1998 E36 BMW 318i 318is 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
    1999-2005 E46 BMW 323i 323ci 325i 325ci 328i 328ci 330i 330ci
    Part #: 33531138109
    Price: $17.95 (USD) 
    Quantity:   
    This is the stock replacement rear upper control arm inner bushing. (sold individually)

    This item fits the following BMWs:
    1992-1998 E36 BMW 318i 318is 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
    1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
    2004-2010 E83 BMW X3 2.5i X3 3.0i X3 3.0si
    2003-2008 Z4 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
    Part #: 33321092247
    Price: $14.95 (USD) 
    Quantity:   
    This bushings is identical to the standard bushing, except it uses a harder durometer rubber compound, making it stiffer than the standard OE bushing, yet still legal in many racing classes. Price is per bushing.
    Part #: 33327749475N
    Price: $84.95 (USD) 
    Quantity:   
    Made in the USATMS rear subframe bearings are designed to limit rear control arm movement relative to the subframe. The stock BMW subframe bushings are made out of rubber, which allows variance in suspension position due to deformation and compression. A race car needs to have all suspension points remain in place for proper setup. By using high grade aircraft aluminum alloy and high performance race bearings, the TMS bushing replacements are both lightweight and strong. The casing is designed so that if maximum motion occurs, the load will be evenly distributed throughout the casing. Our flanges are designed to spread the load on the subframe and limit movement. The bearing we use is an extra wide race bearing to distribute the load over a broader area. Each piece is anodized or nickel plated to withstand corrosion. These bushings are a perfect compliment to the TMS lower camber arms.

    Click here for installation instructions.

    Part #: TSU9980006
    Price: $164.95 (USD) 
    Quantity:   
    This is the stock replacement rear lower control arm inner bushing, also known as the camber arm or lower wishbone. (sold individually).

    This item fits the following BMWs:
    1992-1998 E36 BMW 318i 318is 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
    1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
    2004-2010 E83 BMW X3 2.5i X3 3.0i X3 3.0si
    2003-2008 Z4 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
    Part #: 33326770824
    Price: $15.95 (USD) 
    Quantity:   
    Made in the USAChanging out the stock rubber differential bushings for Delrin and aluminum will result in more feedback and better suspension performance. This kit will also help prevent the front diff bolt from loosening or shearing - a very common problem on E36 cars.

    The Turner Motorsport solid diff bushings have spent years being tested in various racing series and have even been used extensively on street cars. These bushings are CNC machined from high-grade billet aluminum and Delrin and are a direct replacement for the stock rubber pieces. The rear two differential cover bushings are slotted to allow for BMW manufacturing tolerances. The kit includes 3 pieces: a Delrin front mount and 2 aluminum rear mounts. A new front diff bolt is recommended - add it from the drop-down box below.

    Click here for installation instructions.

    This item fits the following BMWs:
    1992-1998 E36 BMW 318i 318is 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
    **NOTE:Not for Euro Spec M3's (3.2 liter)**
    Part #: TDR3680001
    Price: $139.95 (USD) 
    This ball joint is used for the upper rear trailing arm bushing on ALL E36, E46, E83 X3, and E85 Z4 cars. BMW also used it as the lower bushing on most M cars. It makes a great upgrade on all non-M cars where BMW used a rubber bushing at the lower position.

    This sealed ball joint is one of the best things about the rear suspension - it functions extremely well and lasts a long time. And it can be used as a replacement for the existing bushing without any further modification. The non-M cars used a solid rubber bushing for the lower arm (camber arm, wishbone) which does not last very long and relies on bushing deflection (twist) during suspension motions. The ball joint inside the upgraded design is much more effective during this suspension movements as it does not bind or deflect. And because it's sealed with rubber it will last a long time and remain quiet and maintenance free. Most customers report that after installing or "upgrading" to these bushings the rear end of their car felt much more stable.

    Price is per bushing. Left/Right and Upper/Lower are the same part.

    This item fits the following BMWs:
    1992-1998 E36 BMW 318i 318is 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
    1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
    2004-2010 E83 BMW X3 2.5i X3 3.0i X3 3.0si
    2003-2008 Z4 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
    Part #: 33326775551
    Price: $48.95 (USD) 
    Quantity:   
    Made in the USAThese are the best rear shock mounts that we have found for the E30, E36, E46, Z3 & E85 Z4! Featuring CNC-machined billet aluminum mounting base with a replaceable urethane bushing (replacement bushings are just $15 and are changed in minutes!). These mounts are excellent for either street or track because of their low NVH (noise, vibration, and harshness). Plus, the superior design will far outlast the life of stock mounts - maybe even the car itself. You'll never think twice about your shock mounts again! These shock mounts are a direct replacement of the stock mounts so they fit all shocks with the BMW-standard 10mm shock shaft, including all factory and OEM shocks (Boge, Sachs, etc), H&R coil overs, Bilstein shocks and PSS, PSS9, PSS10 coil overs (except the B16 Ride Control Kit). This is sold as a package with new shock mount gaskets, washers, and Nyloc nuts.

    This item fits the following BMWs:
    1984-1991 E30 BMW 318i 318is 318ic 325e 325es 325i 325ic 325is 325ix M3
    1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
    1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
    1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
    2003-2008 Z4 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
    Part #: JTD909
    Price: $99.95 (USD) 
    Quantity:   
    Made in the USAThese rear shock mounts are specifically for use with rear shocks with a 12mm shaft, such as some Koni shocks. They feature anodized aluminum and a heavy duty rubber bushing. Note that the Bilstein Ride-Control B16 kit uses a 12mm shaft (that kit is different than the Bilstein PSS9/PSS10 kits, which use the BMW-standard 10mm shaft).
    Part #: TCKRUM12R
    Price: $109.95 (USD) 
    Quantity:   
    This is a BMW OEM shock mount, originally used on the E30 convertible models. Why E30? Because we have tried them all and the E30 cabrio mounts seem to hold up the best. However, all OEM rubber shock mounts will fail - it's just a matter of time. They'll even fail with a stock suspension but even quicker with modified suspensions. These E30 mounts are a little better than the originals. For even greater strength upgrade to the 'Repair Shop' or the aluminum mounts. Priced per pair.
    Part #: 33521132104
    Price: $49.90 (USD) 
    Quantity:   
    These are the factory standard rear shock mounts used on E36 cars. They can also be used on all other E30, E46, Z3, and Z4 models, including M cars. These mounts are a low-cost replacement mount with the same original design as the stock mounts for your car. As a replacement mount they function the exact same as the originals. The original design has proven to be problematic in the past, especially on lowered cars or with cars that see a lot of track use. If you're modifying the suspension for stiffness or lowering, or plan to autocross or track your car we very strongly recommend a different shock mount (such as the HP Aluminum/Rubber mounts, listed here). Otherwise, these are a direct replacement for the stock mount, from a high quality OEM supplier, at a very attractive price.

    This item fits the following BMWs:
    1984-1991 E30 BMW 318i 318is 318ic 325e 325es 325i 325ic 325is 325ix M3
    1992-1999 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
    1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
    1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
    2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
    Part #: 33521137972
    Price: $29.90 (USD) 
    Quantity:   
    The rear mounts in BMW 3 series fail, no matter what year from 1983 to present, that is a weak point of the suspension. Here's the solution. The 3 Series "Repair Shop" Rear Shock Mounts carry a lifetime warranty and will last as long as you own your car. Expect the same comfortable ride you have with factory mounts. These are an inexpensive alternative to expensive factory mounts.

    Make this complete by adding the mount gasket and nuts (add the option below).
    Part #: JRDRP
    Price: $39.90 (USD) 
    Made in the USAIf you're installing a rear shock on your E30/E36/E46/Z3/Z4 that utilizes a Spherical Bearing or Rod-End, commonly referred to as an ‘eye mount’, and used with racing shocks/dampers, this is the upper rear mounts needed to attach your shock to the chassis. The mount is machined out of aircraft grade aluminum with a high quality coating and premium hardware. Note: 2 Bushing kits are included for common eyelet bearings; see chart for sizes. If you do not see the bushing kit you need, give us a call and have our in-house machine shop build you custom bushings.



    view largerOur Racing Rear Lower Shock Mount is machined out of aircraft grade aluminum. We include both the TSU9007B15 and TSU9007B50 bushing kits with this package. (see chart for included bushing sizes).

    Chart
    Optional Bushings Bushing Kit Part#B=Bore dia. W=Ball width Optional Bushings
    TSU9007B1515 mm12 mm
    TSU9007B50.500" inch .500" inch
    Call or Emailother sizeother size

    Don't see your desired size? No problem. Simply give us a call and our in-house machine shop build you custom bushings for your application.

    This item fits the following BMWs:
    1984-1991 E30 BMW 318i 318is 318ic 325e 325es 325i 325ic 325is 325ix M3
    1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
    1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
    1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M coupe M Roadster
    2003-2008 Z4 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster Z4 M coupe
    Part #: TSU9906SMP
    Price: $239.95 (USD) 
    Quantity:   
    Made in the USAWant the Ultimate design in a rear shock tower mount? You've found it. These rear shock mounts are designed for use on the track and racing. This set of mounts will help your rear shocks perform the best they can in those conditions. The advantage to using a mount with spherical bearing is that it allows the shock to freely move off axis without side loading the shock shaft like rubber or polyurethane mounts do. Side loading a shock increases stiction and wear which decreases its efficiency. Because these are mounts without an isolator (rubber or polyurethane) to dampen road noise and vibrations we do not recommend them for street cars. These were designed in-house and developed for our own track and race cars.

    These TMS bearing mounts include both 10mm and 12mm stainless steel bearing sleeves to work with a wide variety of shock shaft pins. The pin is the upper-most portion of the shock where it passes through the mount. If you need a bearing sleeve size other then 10mm or 12mm please contact us.

    These rear shock tower mounts fit the following BMWs:
    1984-1991 E30 3 series (all) incl. 318i, 318is, 325, 325e, 325es, 325i, 325is
    1992-1998 E36 3 series (all) incl. 318i, 318is, 318ti, 325i, 325is, 328i, 328is, 323is
    1999-2005 E46 3 series (all) incl. 323i, 323Ci, 325i, 325Ci, 328i, 328Ci, 330i, 330Ci
    1988-1991 E30 M3 (all)
    1995-1999 E36 M3 coupe, sedan & convertible
    2001-2006 E46 M3 (all) incl. coupe & convertible
    1996-2002 Z3 Roadster/Coupe including "M"
    2003-2008 Z4 Roadster/Coupe including "M"
    Part #: TSU9906SM1
    Price: $169.95 (USD) 
    Quantity:   
    This is the rear spring pad it can be used as an upper spring pad on some cars and a lower spring pad on others.. It is a good idea to replace spring pads while replacing shocks or springs. Sold Individually.

    This item fits the following BMWs:
    Lower Spring Pad
    1984-1991 E30 BMW 318i 318is 318ic 325e 325es 325i 325ic 325is 325ix M3
    1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe

    Upper Spring Pad
    1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
    1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
    2004-2010 E83 BMW X3 2.5i X3 3.0i X3 3.0si
    2003-2008 Z4 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
    Part #: 33531136385
    Price: $7.95 (USD) 
    Quantity:   
    BMW used three different spring pads in the E36 E46 3 series, each a different thickness, the thinnest being only 5mm. If they chose to use the thinnest pad on your car, you may end up with a ride height in the rear a little lower than you expected when lowering you car with sport springs. If this is the case, we suggest using these 15mm rear spring pads. These mount on TOP of the rear spring in the E36 and either top or bottom on the E46 or E85 Z4

    This item fits the following BMWs:
    1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3 - Top only
    1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
    2003-2008 Z4 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
    Part #: 33531094754
    Price: $45.90 (USD) 
    Quantity:   
    Made in the USATMS E36 solid sub-frame bushings are designed for track and racecars to remove twisting and flexing of the subframe where it mounts to the rear floor. This twisting is one of the causes of rear subframe/floor failure in E36 cars. We originally developed these for our SCCA SPEED World Challenge cars. A BMW’s subframe is the heart of the suspension. Because the subframe is mounted with rubber isolators, when the subframe moves, so does the rest of the suspension mounting points. As the rubber wears and becomes more pliable, the alignment and suspension settings move even more. Replace the stock rubber bushings to limit drivetrain and suspension movement and keep your car set up the way it’s supposed to be.

    Our mounts are designed using a CAD program with further attention paid to making the mount as light as possible. We also notched the flanges to allow the use of the BMW factory removal tools. One front bushing is slotted to allow for compliance between manufacturing standards as BMW specifies. These bushings are CNC machined out of high grade billet aluminum.

    Click for installation instructions. (PDF)

    Part #: TDR3680002
    Price: $225.95 (USD) 
    Quantity:   
    On 1992-1999 E36 chassis 3 series, the subframe mounts are known to suffer failures, particularly after many miles and/or harsher driving conditions. When subframe bushings fail, it wreaks havoc with your BMW's suspension alignment and geometry.

    There are four bushings/mounts connecting the subframe to the chassis. These are the aft (rear) pair of bushings (stock) for the 1995-1999 M3 (E36), but can also be used on all 1992-1999 3 series (E36 chassis) BMW's as an upgrade over the stock subframe mounts. **We highly recommend also getting the fore (front) pair of rear subframe bushings as well. These are available seperately (pn# 33319059301), or they can be combined with these (simply select that you also want the forward-most pair as well on the drop-down box below).

    Looking for an upgrade on a non-M E36? The slightly firmer rubber is more durable than the stock non-M subframe mounts, and as such we highly recommend these bushings for all E36 chassis 318i, 318is, 325i, 325is, 323is, 328i, and 328is.

    These mounts are sold as a pair, so two are included for this price.
    Part #: 33319059301
    Price: $81.95 (USD) 
    On 1992-1999 E36 chassis 3 series, the subframe mounts are known to suffer failures, particularly after many miles and/or harsher driving conditions. When subframe bushings fail, it wreaks havoc with your BMW's suspension alignment and geometry.

    There are four bushings/mounts connecting the subframe to the chassis. These are the fore (front) pair of bushings (stock) for the 1995-1999 M3 (E36), but can also be used on all 1992-1999 3 series (E36 chassis) BMW's as an upgrade over the stock subframe mounts. **We highly recommend also getting the aft (rear) pair of rear subframe bushings as well. These are available seperately (pn# 33319059301), or they can be combined with these (simply select that you also want the rear-most pair as well on the drop-down box below).

    Looking for an upgrade on a non-M E36? The slightly firmer rubber is more durable than the stock non-M subframe mounts, and as such we highly recommend these bushings for all E36 chassis 318i, 318is, 325i, 325is, 323is, 328i, and 328is.

    These mounts are sold as a pair, so two are included for this price.
    Part #: 33319066671
    Price: $83.95 (USD) 
    Made in the USAA BMW’s subframe is the heart of the rear suspension. The differential is part of the subframe, as it is a stress member system. When the subframe moves, so do all of the rear suspension mounting points. Replacing the stock rubber subframe bushings with solid aluminum will limit drivetrain and suspension movement and keep your car’s suspension geometry the way it’s supposed to be. The Delrin diff mount bushing is a near-solid mount that will last longer than the original rubber and does not 'wind up' under load/unload. This transfers more power through the axles to the wheels. The Turner Motorsport E36 318ti and Z3 solid subframe and differential mount bushing kit is a direct replacement for the stock BMW subframe mounts and differential bushing. We have incorporated ideas from our other race style solid bushings not only make these very light weight but also to be fully serviceable and removable in the case of subframe or diff cover replacement. This kit is a legal upgrade in many racing classes.

    We also sell the Solid Differential mount and Subframe Mounts separately, for those that may already have one of the products or if you desire spares for fast installation. A common example is if you have two differentials with covers, and want to make fast gearing changes at the track.

    Click here for Z3 / E36ti Subframe Mount installation instructions.
    Click here for Z3 / E36ti Differential installation instructions.

    This item fits the following BMWs:
    1995-1999 E36 BMW 318ti
    1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
    Part #: Z3,tiSRSMK
    Price: $0.00 (USD) 
    Made in the USAThese Rear Trailing Arm Bushings (RTABs) are designed for specific racing classes where more solid or bearing-style bushings are not allowed. Delrin is a very hard plastic material with almost zero deflection and also lasts a lot longer than using any type of rubber or urethane bushing. Since there is less wasted motion with a solid bushing, the suspension can react faster and give you more feedback. The rear alignment stays in check during hard cornering, braking, and acceleration. You will corner faster and be able to get the power down earlier at corner exit with increased confidence.

    Delrin is a near solid bushing that does not absorb or dampen vibration or impact harshness. Therefore, we only recommend these for track-spec cars or street cars and drivers with more tolerance for noise, vibration, and harshness.

    These are a direct replacement for the factory bushings. Special installation tools are required but Delrin does not need long-term care or maintenance. Price is for the pair.

    This item fits the following BMWs:
    1992-1998 E36 BMW 318i 318is 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
    1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
    2003-2008 Z4 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
    Part #: 33322228153D
    Price: $149.30 (USD) 
    Quantity:   
    The rear trailing arm bushings (RTABs) control the toe alignment of the rear suspension. When they go bad, the rear traction suffers because the wheel's toe angle is moving excessively in and out during cornering. This can make the car feel nervous and 'tail happy' even during modest cornering speeds. As important as these bushings are, they only seem to last 40-50,000 miles on their own.

    These German-made Meyle bushings are about 20% stiffer than the originals. The harder rubber allows less compliance which gives better feedback and crisper handling. All Meyle HD parts are warranted for 4 years. It's a performance upgrade with no downside.

    Any RTAB would benefit from our Bushing Limiters. These spacer shims fit on either side of the bushing and limit excess rotation. It's this over-extending of the bushing that causes them to wear out so fast. The Limiters will prolong the life of the bushing and are an easy install when performing the bushing replacement.

    Price is per pair of bushings.

    This item fits the following BMWs:
    1992-1998 E36 BMW 318i 318is 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
    1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
    2004-2010 E83 BMW X3 2.5i X3 3.0i X3 3.0si
    2003-2008 Z4 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
    Part #: 33321097009MY
    Price: $55.90 (USD) 
    Quantity:   
    If you're experiencing a "loose" feeling when going around corners, these are the likely culprit. The rear bushings on these cars will wear out just like any other bushing. When this happens, the rear toe (the angle that the tire points in or out) will vary under load. These M3 bushings are more durable than the stock bushings and hold up better than the original bushings. These rear trailing arm bushings (often referred to as RTAB) are listed as the replacement to BMW part numbers 33322228153 and 33-32-2-228-153.

    This is the most up to date version of this bushing from Lemfoerder. We recommend professional installation as these now require special tools for installation.

    This item fits the following BMWs:
    1992-1998 E36 BMW 318i 318is 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
    1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
    2004-2010 E83 BMW X3 2.5i X3 3.0i X3 3.0si
    2003-2008 Z4 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
    Part #: 33322228153G
    Price: $51.32 (USD) 
    Quantity:   
    These trailing arm bushings are the stock rubber centered bushing. Each side of the car takes one pair of bushings.

    This item fits the following BMWs:
    1970-1976 2002 BMW 1600 2002 2002tii
    1977-1983 E21 BMW 320i
    1984-1991 E30 BMW 318i 318is 318ic 325e 325es 325i 325ic 325is 325ix M3
    1992-1998 E36 BMW 318ti
    1976-1981 E12 BMW 528i
    1986-1988 E28 BMW 528e
    1976-9/1982 E24 BMW 630csi 633csi
    1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Roadster
    Part #: 33329061945
    Price: $19.70 (USD) 
    Quantity:   
    Made in the USAOur Monoball Rear Trailing Arm Bushings are the best solution for completely elimination deflection and unwanted toe changes on the rear of the E36, E46, and Z4. While rubber and urethane bushings flex during load, the toe can change widely giving you nervous and unpredictable handling. These RTABs have a solid aluminum housing with a high-quality race bearing. These bushings were developed over years of competition use in various racing and HPDE events. There is simply no better RTAB unless your racing class rules prohibit the use of mono or spherical bearings.

    The rear trailing arm bushings take a lot of abuse from acclerating, braking and cornering. The stock rubber bushings are just not up to the task of keeping rear wheel alignment in spec for very long, especially if you have upgraded to stickier tires and a better suspension. The pliable rubber flexes and twists which slows down reaction time and leaves you with a car that feels nervous and 'tail happy'. Urethane helps to control the alignment but issues with fitment, maintenance, and longevity keep us from recommending urethane on anything but a street car. We also offer a Delrin RTAB for cars that must conform to certain racing class rules. These aluminum spherical bearings are the best at controlling rear toe alignment.

    Our aluminum RTABs are very well made - high grade aluminum alloy and steel CNC'd out of a billet by an ISO 9001 certified manufacturer, each component is either hardcoated or nickel plated. The bearing is extra wide to accept higher loads and is replacable for a nominal cost. While multiple manufacturer’s offer two piece designs, our research showed that a one piece bushing is a better design.

    Because solid bushings transmit more noise, vibration, and harshness we do not recommend their use on any street car. These are sold for race or track-prepped cars only.

    Click here for installation instructions.

    This item fits the following BMWs:
    1992-1998 E36 BMW 318i 318is 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
    1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
    2003-2008 Z4 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
    Part #: TSU9980020
    Price: $279.95 (USD) 
    Quantity:   
    Replacement Bushings for JTD909 Aluminum Rear Shock Tower Mounts. This includes enough bushings to replace bushings on both the left and right mounts.
    Part #: JTD909-75
    Price: $15.00 (USD) 
    Quantity:   
    The ORIGINAL rear trailing arm bushing / RTAB shim kit -- and still the best! As Used on Project E36 M3
    Made in the USA The Turner rear trailing-arm bushing limiter kit creates a stiffer rear suspension without sacrificing ride quality. Stock trailing arm bushings are known for failure, on both the E36 and E46 BMW chassis. This kit is a perfect upgrade from stock, as it reduces bushing deflection, dramatically increases bushing life, improves handling, and all without the harshness of "race-only" bushings, and while maintaining completely silent operation -- no squeaks and no vibration, whatsoever.

    By combining these limiters with stock bushings, this is a great low cost and effective suspension performance enhancer. Each pair of blue aluminum "shims" essentially sandwich the stock rubber bushing to control their lateral movement. By limiting the amount of side-to-side play of the stock bushing, drivers will have increased driver feel thanks to the reduction of toe variation caused by the squirm of the stock rubber bushings. This also reduces duress on the bushing, giving your newly installed bushings a dramatically longer lifespan (a welcome benefit for both pure street or tracked cars). Some stock class racing series even allow this kind of modification, because the stock bushing is still being used.

    Kit includes: 4-black anodized aluminum bushing limiters, eight 5mm allen bolts and a drilling template.

    Need bushings? Click here for replacement trailing arm bushings.

    Click for installation instructions.

    This RTAB limiter / shim kit fits the following BMWs:
    1992-1999 E36 3 Series including 318i, 318is, 325i, 325is, 328i, 328is & 323is
    1995-1999 E36 M3 3.0 & 3.2 (coupe & sedan)
    1999-2005 E46 3 Series including 323i, 323Ci, 325i, 325Ci, 325xi, 328i, 328Ci, 330i, 330xi & 330Ci
    2001-2006 E46 M3 coupe & convertible
    2004-2011 X3 2.5, 3.0
    2003-2009 Z4 Roadster & Coupe (2.5, 3.0, 3.0si)
    2006-2009 MZ4 M Roadster / M Coupe
    Part #: TSU9990001
    Price: $89.95 (USD) 
    Quantity:   
    Made in the USA2.25" or 2.50" Upper Spring Perch Set, fits coil over/racing springs only. For use on any shock/strut that uses the stock BMW shaft diameter (ex. Bilstein front strut, including Bilstein Gp N). Works with factory upper strut bearings, KMAC or other camber plates. Choose the size you need below.
    Part #: USP225
    Price: $89.95 (USD) 
    Made in the USA60mm Upper Spring Perch Set, fits 60mm inside diameter springs. For use on front struts with stock-sized piston rod (including Bilstein struts and Group N struts) Works with factory upper strut bearings, KMAC or most other camber plates.
    Part #: TSU9980007
    Price: $90.00 (USD) 
    Quantity: