|
|
|
 |
Adjusting Unit for Intake Manifold (DISA Valve) - 2.5 liter - E46 E39 E60 X3 Z3 Z4
(more info)
The DISA Valve adjusts the intake manifold runner length to improve performance. When it fails it can lead to a rough idle and perhaps a engine fault code light. This adjusting unit fits E46 325i with M54 engine, E39 525i, E60 525i 2004-2005 - X3 2.5i - Z3 2.5i Z4 2.5i
This item fits the following BMWs:
2001-2005 E46 BMW 325i 325ci 325xi only with M54 engine
2001-2003 E39 BMW 525i
2004-2005 E60 BMW 525i 525xi
2004-2006 E83 BMW X3 2.5i
2000-2002 Z3 BMW Z3 2.5i
2003-2006 E85 BMW Z4 2.5i
|
| Part #: 11617544806
(11-61-7-544-806)
|
| Price: $199.95 (USD) |
|
|
|
|
 |
Adjusting Unit for Intake Manifold (DISA Valve) - 3.0 Liter - E46 E39 E60 X3 X5 Z3 Z4
(more info)
The DISA Valve adjusts the intake manifold runner length to improve performance. When it fails it can lead to a rough idle and perhaps a engine fault code light. This adjusting unit fits E46 325i with M56 engine, 330i, E39 530i, E60 530i 2004-2005 - X3 3.0i 2004-2006 - X5 3.0i 2000-2006 Z3 3.0i, Z4 3.0i 2003-2006
This item fits the following BMWs:
2003-2005 E46 BMW 325i 325ci 325xi only with M56 engine
2001-2005 E46 BMW 330i 330ci 330xi
2001-2003 E39 BMW 530i
2004-2005 E60 BMW 530i 530xi
2004-2006 E83 BMW X3 3.0i
2000-2006 E53 BMW X5 3.0i
2000-2002 Z3 BMW Z3 3.0i
2003-2006 E85 BMW Z4 3.0i
|
| Part #: 11617544805
(11-61-7-544-805)
|
| Price: $199.95 (USD) |
|
|
|
|
 |
Air Filter for BMW Performance Intake Kit - E46 325i 330i
(more info)
This filter is designed to work on the factory BMW Performance air intake kit. It will not work on the stock intake system or any aftermarket intake system.
This item fits the following BMWs:
1999-2005 E46 BMW 325i 325ci 325xi 330i 330ci 330xi
|
| Part #: 13720431649
(13-72-0-431-649)
|
| Price: $64.95 (USD) |
|
|
|
|
 |
CRC Mass Air Flow Sensor Cleaner, 11 Oz Can
(more info)
CRC HFM cleaner is specifically developed to clean mass air flow sensors. Increases horsepower & improves air/fuel ratio and MPG. Plastic safe-dries in seconds! Perfect for cars that have had "over-oiled" performance filters installed. Over-oiling can cause the HFM to gum up, this is the perfect solution. This item cannot ship air freight or internationally. UPS Ground shipping to the lower 48 US states only. |
| Part #: 05110 |
| Price: $11.95 (USD) |
|
|
|
|
 |
Genuine BMW Performance Intake Kit - E46 325i 325ci 325xi
(more info)
This Genuine BMW Performance Intake kit replaces the entire factory air box assembly and filter with a new high flow air box and air filter. Designed by BMW engineers, this kit offers precise fit and unparalleled finish. It is good for a 3hp gain at 6000 rpm. Fits E46 325i 325xi 2001-2005 325ci 2001-2006.
This item fits the following BMWs:
2001-2005 E46 BMW 325i 325xi - M54 engine only
2001-2006 E46 BMW 325ci 325ci Convertible - M54 engine only
|
| Part #: 13720432306
(13-72-0-432-306)
|
| Price: $899.95 (USD) |
|
|
|
|
 |
Genuine BMW Performance Intake Kit - E46 330i 330ci 330xi
(more info)
This Genuine BMW Performance Intake kit replaces the entire factory air box assembly and filter with a new high flow air box and air filter. Designed by BMW engineers, this kit offers precise fit and unparalleled finish. It is good for a 3hp gain at 6000 rpm. Fits E46 330i 330xi 2001-2005 330ci 2001-2006.
This item fits the following BMWs:
2001-2005 E46 BMW 330i 330xi
2001-2006 E46 BMW 330ci 330ci Convertible
|
| Part #: 13720429613
(13-72-0-429-613)
|
| Price: $829.95 (USD) |
|
|
|
|
 |
Idle Control Valve - M50, M52, M52TU, M54
(more info)
Rough or hunting idle? Stalling? Sputtering? These are all symptoms of poor fuel delivery or a vacuum leak in your intake system. The idle control valve is one of the areas that you can check to fix these issues. The ICV is basically a electrically-driven throttle body that regulates the air/fuel mixture at light throttle openings. Over time, the ICV can become gummed up with oil and carbon, resulting in slow or blocked operation. Worst case, the electric motor inside will freeze which will stall the engine.
The ICV will typically need to be cleaned or replaced every 100k miles. It can be cleaned with carb cleaner but for seriously dirty or old ICVs you may want to replace the whole unit with a new one. There is also a hard rubber seal between the ICV and the manifold and this should be replaced as well. You may also want to replace the Crankcase Vent Valve as it can also fill up with oil and carbon and replacement can be done at the same time as the ICV.
Add a new ICV to your M50 Manifold Upgrade to save time and money!
This is a new OEM Bosch idle control valve and OE BMW sealing grommet.
13411744713 - idle control valve
13411733217 - sealing grommet
This idle control valve fits the following BMWs:
1992-1998 E36 BMW 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
1989-1995 E34 BMW 525i
1997-2003 E39 BMW 525i 528i 530i
2004-2005 E60 BMW 525i 530i
2000-2006 E53 BMW X5 3.0i
1997-2002 Z3 BMW Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe (except S54)
2003-2005 E85 BMW Z4 2.5i Z4 3.0i
|
| Part #: E36-E46-IDLE-CONTROL-VALVE |
| Price: $199.90 (USD) |
|
|
|
|
|
|
|
 |
Intake Boot - E46 323i 325i (M54) 325xi 328i - Z3 2.8 2.5
(more info)
This intake boot connects to the mass air sensor. It fits BMW E46 323i 325i (M54) 325xi 328i - Z3 2.8 2.5.
This item fits the following BMWs:
1999-2005 E46 BMW 323i 323ci 325xi 328i 328ci
2001-2005 E46 BMW 325i 325ci with M54 engine
1999-2002 Z3 BMW Z3 2.3 Z3 2.5i Z3 2.8
|
| Part #: 13541705209
(13-54-1-705-209)
|
| Price: $16.95 (USD) |
|
|
|
|
 |
Intake Boot - Lower - E46 325i M56, 330i
(more info)
This intake boot connects to the throttle housing to the upper intake boot. If it becomes cracked or loose it can cause unmetered air to enter the engine and trigger a check engine light. This fits BMW E46 330i Z3 3.0i and E46 325i with M56 engine.
This item fits the following BMWs:
2003-2005 E46 BMW 325i 325ci with M56 SULEV engine
1999-2005 E46 BMW 330i 330ci 330xi
1997-2002 Z3 BMW Z3 3.0i
|
| Part #: 13541438759 |
| Price: $14.95 (USD) |
|
|
|
|
 |
Intake Boot - Upper - E46 330i, 325i (M56), Z3 3.0i
(more info)
This intake boot connects to the mass air sensor. If it becomes cracked or loose it can cause unmetered air to enter the engine and trigger a check engine light. This fits BMW E46 330i Z3 3.0i and E46 325i with M56 engine.
This item fits the following BMWs:
1999-2005 E46 BMW 330i 330ci 330xi
2003-2005 E46 BMW 325i 325ci with M56 engine
2000-2002 Z3 BMW Z3 3.0i
|
| Part #: 13541438761
(13-54-1-438-761)
|
| Price: $27.95 (USD) |
|
|
|
|
|
Intake Temperature Sensor - E36 E46 E39 E38 X3 X5 Z3
(more info)
This temperature sensor is mounted in either the intake manifold or the intake air box assembly depending on the model car.
This item fits the following BMWs:
1996-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 328i 328is 328ic M3
1999-2000 E46 BMW 323i 323ci 328i 328ci
2001-2005 E46 BMW 325i 325ci 325xi 330i 330ci 330xi - M54 engine only
1997-2003 E39 BMW 525i 528i 530i 540i
1997-2001 E38 BMW 740i 740il 750il
2004-2006 E83 BMW X3 2.5i X3 3.0i
2000-2006 E53 BMW X5 3.0i
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i
1998-2000 Z3 BMW M Roadster M Coupe
|
| Part #: 13621739510
(13-62-1-739-510)
|
| Price: $22.95 (USD) |
|
|
|
|
 |
ITG Foam Filter for Eurosport/Conforti Intake Kits
(more info)
Replacement ITG Foam Filter for Conforti Intake Kits. Available in 3" and 3.5" opening (see below for applications) or check your filter box for correct appliaction. Filter
comes pre-oiled but oil recharge kit is recommended for future maintenance.
Click here for approved cleaning methods for ITG foam filters.
Applications:
3.5" (blue box): all Euro HFM kits (E36 M3, MZ3), E46 330, late E46 325, E39 530, E39 540, Z3 3.0
3.0" (green box): all other models not listed above (E36 M3/MZ3 with stock HFM, E36 325/328, E46 323/328, E39 525/528, Z3 2.3/2.8) |
| Part #: JC60/73 / JC60/86 |
| Price: $84.95 (USD) |
|
|
|
|
|
 |
K&N Typhoon Cold Air Intake System for E46 M3
(more info)
Built for performance and show, the Typhoon® Air Intake System is a free-flowing mandrel-bent aluminum tube induction system designed to fit many sport compact performance vehicles. Each kit is proven on a rear-wheel dynamometer to increase horsepower and torque. Typhoon intakes come in one of three designs; cold air intakes (CA), short ram intakes (SR), or complete cold air (CCA) intakes which can be configured as either a cold air intake or a short ram intake. Available in an assortment of powder coated colors and polished aluminum, these kits are sure to please in every way. They come with an oversized High-Flow conical air filter designed to provide increased surface area and dust capacity. This extra surface area provides even more airflow at lower restriction than a standard K&N O/E replacement filter that is limited to the size of the factory air box. The oversize air filter also captures more dirt increasing the service life before a cleaning is required (up to 100,000 miles).
| 69-2001TWK
Product Specifications |
Product
Style: 69 Series Typhoon Kits
Estimated Horsepower Gain: 8.9 HP @ 6000 RPM
Color: Black
Replacement Filter: RP-5113
CARB Exempt: No
System Type: Short-ram intake system
Weight: 8.7 lb (3.9 kg)
Product Box Length: 19.3 in (490 mm)
Product Box Width: 14.5 in (368 mm)
Product Box Height: 8.4 in (213 mm) |
 Click
here for installation instructions.
|
| Part #: 69-2001TWK |
| Price: $299.95 (USD) |
|
|
|
|
 |
No-Toil Foam Filter Oil (for ITG Filters)
(more info)
Don't use harsh solvents like gasoline to clean your ITG on your Eurosport/Conforti intake kit (or similar foam filter element). This product is all you need to maintain your ITG foam filter, and is recommend for use with all Conforti Cold-Air Intake Kits.
When cleaning an ITG foam filter, ITG recommends using warm water and a mild detergent (simple dish soap is fine). Strong detergents and solvents can harm the foam, and cause the filter to break down. Once dirt, dust and debris are rinsed out of the filter, it should be re-oiled to ensure proper function of the filter. ITG recommends No-Toil filter oil, as it is safe to the foam filter media, and is completely waterproof. Drive with more peace of mind through heavy rain and puddles.
Please note, as this product is an aerosol, it MUST BE SHIPPED BY UPS GROUND. Sorry, this can not be shipped outside of the US/Canda.
|
| Part #: NTO-AEROSOL |
| Price: $10.95 (USD) |
|
|
|
|
|
|
|
 |
Turner Motorsport E46 M3 Carbon Fiber Cold Air Intake Kit
(more info)
Introducing the TMS Carbon Fiber Cold Air Intake for the E46 M3. After a lot of dyno time testing various intakes, we found this system to offer the best combination of horsepower, fit/finish and price. On a stock M3 this intake gained 8 rear wheel horsepower and 5 lb/pounds of torque (not a huge gain but equal or better than any other intake we tested). Best best gains, we highly recommend our performance software, which is available by Shark Injector (a convenient do-it-yourself engine computer reprogrammer).
This system is in stock and ready to ship! It does not require any software modification and installs in less than 2 hours. There is only a minimal change in engine sound. Fit and finish is excellent and of course you have the ultra-strong and great looking, clear coated, 100% carbon fiber construction.
Click
here for Dyno Chart
|
| Part #: BMW46M3 |
| Price: $749.00 (USD) |
|
|
|
|
Intake Kits and Individual Intake Components
