BMW
E53 Intake Kits and Individual Intake Components
Whether you need an intake boot for your E36, a DISA valve for your E46 or are looking for a Genuine BMW Performance Intake Kit for your E90 we have the parts you need to repair or enhance your BMW's intake system.
If you are looking for cold air intake kits you may also want to check our BMW aFe Intake Kits
Available for the following BMWs: (click icon to change BMW)
Adjusting Unit for Intake Manifold (DISA Valve) - 3.0 Liter - E46 E39 E60 X3 X5 Z3 Z4
(more info) The DISA Valve adjusts the intake manifold runner length to improve performance. When it fails it can lead to a rough idle and perhaps a engine fault code light. This adjusting unit fits E46 325i with M56 engine, 330i, E39 530i, E60 530i 2004-2005 - X3 3.0i 2004-2006 - X5 3.0i 2000-2006 Z3 3.0i, Z4 3.0i 2003-2006
This item fits the following BMWs:
2003-2005 E46 BMW 325i 325ci 325xi only with M56 engine
2001-2005 E46 BMW 330i 330ci 330xi
2001-2003 E39 BMW 530i
2004-2005 E60 BMW 530i 530xi
2004-2006 E83 BMW X3 3.0i
2000-2006 E53 BMW X5 3.0i
2000-2002 Z3 BMW Z3 3.0i
2003-2006 E85 BMW Z4 3.0i
Part #: 11617544805
(11-61-7-544-805)
Price: $199.95 (USD)
CRC Mass Air Flow Sensor Cleaner, 11 Oz Can
(more info) CRC HFM cleaner is specifically developed to clean mass air flow sensors. Increases horsepower & improves air/fuel ratio and MPG. Plastic safe-dries in seconds! Perfect for cars that have had "over-oiled" performance filters installed. Over-oiling can cause the HFM to gum up, this is the perfect solution. This item cannot ship air freight or internationally. UPS Ground shipping to the lower 48 US states only.
Part #: 05110
Price: $11.95 (USD)
Idle Control Valve - M50, M52, M52TU, M54
(more info) Rough or hunting idle? Stalling? Sputtering? These are all symptoms of poor fuel delivery or a vacuum leak in your intake system. The idle control valve is one of the areas that you can check to fix these issues. The ICV is basically a electrically-driven throttle body that regulates the air/fuel mixture at light throttle openings. Over time, the ICV can become gummed up with oil and carbon, resulting in slow or blocked operation. Worst case, the electric motor inside will freeze which will stall the engine.
The ICV will typically need to be cleaned or replaced every 100k miles. It can be cleaned with carb cleaner but for seriously dirty or old ICVs you may want to replace the whole unit with a new one. There is also a hard rubber seal between the ICV and the manifold and this should be replaced as well. You may also want to replace the Crankcase Vent Valve as it can also fill up with oil and carbon and replacement can be done at the same time as the ICV.
Add a new ICV to your M50 Manifold Upgrade to save time and money!
This is a new OEM Bosch idle control valve and OE BMW sealing grommet.
13411744713 - idle control valve
13411733217 - sealing grommet
This idle control valve fits the following BMWs:
1992-1998 E36 BMW 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
1989-1995 E34 BMW 525i
1997-2003 E39 BMW 525i 528i 530i
2004-2005 E60 BMW 525i 530i
2000-2006 E53 BMW X5 3.0i
1997-2002 Z3 BMW Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe (except S54)
2003-2005 E85 BMW Z4 2.5i Z4 3.0i
Applications:
3.5" (blue box): all Euro HFM kits (E36 M3, MZ3), E46 330, late E46 325, E39 530, E39 540, Z3 3.0
3.0" (green box): all other models not listed above (E36 M3/MZ3 with stock HFM, E36 325/328, E46 323/328, E39 525/528, Z3 2.3/2.8)
Part #: JC60/73 / JC60/86
Price: $84.95 (USD)
No-Toil Foam Filter Oil (for ITG Filters)
(more info) Don't use harsh solvents like gasoline to clean your ITG on your Eurosport/Conforti intake kit (or similar foam filter element). This product is all you need to maintain your ITG foam filter, and is recommend for use with all Conforti Cold-Air Intake Kits.
When cleaning an ITG foam filter, ITG recommends using warm water and a mild detergent (simple dish soap is fine). Strong detergents and solvents can harm the foam, and cause the filter to break down. Once dirt, dust and debris are rinsed out of the filter, it should be re-oiled to ensure proper function of the filter. ITG recommends No-Toil filter oil, as it is safe to the foam filter media, and is completely waterproof. Drive with more peace of mind through heavy rain and puddles.
Please note, as this product is an aerosol, it MUST BE SHIPPED BY UPS GROUND. Sorry, this can not be shipped outside of the US/Canda.
Intake Kits and Individual Intake Components
