 |
| aFe Dynamic Air Scoops (DAS)- - E60 M5 - E63 M6
(more info) |
 Direct more fresh cool air from your BMW's center/nose grills to your intake, with the aFe D.A.S. (Dynamic Air Scoops). These two "scoops" install behind your front grills to direct more airflow into the factory intake snorkel used on the 2006-2010 M5 and 2006+ M6. Scoops are a direct bolt-in install, and include installation instructions and required hardware for a simple install. When combined with a higher flowing filter, such as the aFe stock replacement filter these scoops help get the maximum benefit of a higher efficiency filter by providing more cool, fresh outside air directly into the intake snorkel. |
| Part #: 54-11278 |
| Price: $255.00 (USD) |
|
|
|
|
|
|
 |
| aFe Intake Kit - E60 M5 & E63/E64 M6 V10 - Pro5R
(more info) |
Maxiumum Flow Pro5R Filter
Rid your M5 or M6's V10 powerplant of both of its restrictive factory air boxes with this cold air intake kit by aFe, and you'll cut the airflow restriction IN HALF. Air flow showed an increase of 117% and dyno testing yielded max power gains of 28hp and 24 ft/lbs of torque. The intake tubes of this kit are custom-designed to accelerate airflow for best performance. Fits all 2006, 2007, 2008 and 2009 and V10 M5 and M6.
Kit includes everything necessary to install, including installation instructions. This kit can typically be installed in less than 60 minutes, and uses all factory mounting points (no modifications). The kit uses 2 high performance 360 degree radial flow air filters which are washable/reusable. The filtration media uses the deepest pleats in the industry, allowing the most surface area and airflow possible, in the space allowed. The increased airflow is significant enough that it is audible while driving, giving your 5.0 liter V10 a subtly more aggressive sound when revving or under load. Best of all, this is a SAFE product that will not cause any longevity issues or malfunctions to your BMW's intricate engine management system.
This version uses aFe's highest flowing filter media, which uses a lightly oil gauze to filter out dirt and particulates, while allowing more air to flow to the intake. For the best flowing filter, with the best performance gain, we always recommend this standard aFe filter media (often called "Pro5R ", which has a blue pre-oiled filter media). We also carry this filter in the "ProDry" grey filter media, which is oil-free for only slightly less performance and no maintenance.
This aFe Cold Air Intake Kit fits the following BMWs:
2006,2007,2008,2009 BMW E60 M5 Sedan
2006,2007,2008,2009 BMW E63 M6 Coupe
2006,2007,2008,2009 E64 M6 Convertible
 Click
here for installation instructions.
|
| Part #: 54-11272 |
| Price: $729.00 (USD) |
|
|
|
|
|
|
 |
| aFe Restore Kit
(more info) |
| aFe's highly refined oil is proven less likely to foul MAF sensors than other oil. It works great with aFe filters and is a great way to upgrade competitive oiled filters. aFe cleaner is specially formulated to release dirt without harming the microfibers critical to efficient filtration. It has a simple three step restoration procedure. Available in either aerosol or squeeze bottle. |
| Part #: 90-50501XX |
Regular Price: $11.45 (USD)
Sale Price: $10.31 (USD) |
|
|
|
|
|
|
|
 |
| aFe Stage 1 Intake Kit - E60 545i, E63 645ci 2004-2005 - ProDry S
(more info) |
"Oil-Free" ProDry S Filter
This intake kit replaces your restrictive factory air box. It features a 3-angle aluminum velocity stack adapter, 16-gauge powder-coated steel heat shield, trim sealed to seal out hot engine air, and a custom aFe brand cotton filter.
This version has an oil-free filter media for less maintenance. For the best flowing filter, with the best performance gain, we always recommend the standard aFe "Pro5R " filter (which has a blue pre-oiled filter media), but this oil-free filter flows only slightly less than the blue Pro5R style aFe filter, and requires no re-oiling after cleaning the filter.
By removing your stock intake air box, you are removing the most restrictive portion of your intake system, increasing both horse power and torque, improving acceleration as well as throttle response. |
| Part #: 51-11081 |
| Price: $299.00 (USD) |
|
|
|
|
|
|
 |
| aFe Stage 1 Pro5R Intake Kit - E60 545i, E63 645ci 2004-2005 - Pro5R
(more info) |
Maxiumum Flow Pro5R Filter
This intake kit replaces your restrictive factory air box. It features a 3-angle aluminum velocity stack adapter, 16-gauge powder-coated steel heat shield, trim sealed to seal out hot engine air, and a custom aFe brand cotton filter.
This version uses aFe's highest flowing filter media, which uses a lightly oil gauze to filter out dirt and particulates, while allowing more air to flow to the intake. For the best flowing filter, with the best performance gain, we always recommend this standard aFe filter media (often called "Pro5R ", which has a blue pre-oiled filter media). We also carry this filter in the "ProDry" grey filter media, which is oil-free for only slightly less performance and no maintenance.
By removing your stock intake air box, you are removing the most restrictive portion of your intake system, increasing both horse power and torque, improving acceleration as well as throttle response. |
| Part #: 54-11081 |
| Price: $299.00 (USD) |
|
|
|
|
|
|
 |
| aFe Stage 2 Intake Kit - E60 525i 530i 2004-2005 M54 Engine - Pro5R
(more info) |
Maxiumum Flow Pro5R Filter
This intake kit replaces your restrictive factory air box. It features a 16-gauge powder-coated steel heat shield, heat-resistant molded intake tube, trim sealed to seal out hot engine air, and a custom application-specific aFe brand cotton filter.
This version uses aFe's highest flowing filter media, which uses a lightly oil gauze to filter out dirt and particulates, while allowing more air to flow to the intake. For the best flowing filter, with the best performance gain, we always recommend this standard aFe filter media (often called "Pro5R ", which has a blue pre-oiled filter media). We also carry this filter in the "ProDry" grey filter media, which is oil-free for only slightly less performance and no maintenance.
By removing your stock intake air box, you are removing the most restrictive portion of your intake system, increasing both horse power and torque, improving acceleration as well as throttle response. |
| Part #: 54-11572 |
| Price: $355.00 (USD) |
|
|
|
|
|
|
 |
| aFe Stage 2 Intake Kit - E60 525i 530i 2004-2005 M54 Engine - ProDry S
(more info) |
"Oil-Free" ProDry S Filter
This intake kit replaces your restrictive factory air box. It features a 16-gauge powder-coated steel heat shield, heat-resistant molded intake tube, trim sealed to seal out hot engine air, and a custom application-specific aFe brand cotton filter.
This version has an oil-free filter media for less maintenance. For the best flowing filter, with the best performance gain, we always recommend the standard aFe "Pro5R " filter (which has a blue pre-oiled filter media), but this oil-free filter flows only slightly less than the blue Pro5R style aFe filter, and requires no re-oiling after cleaning the filter.
By removing your stock intake air box, you are removing the most restrictive portion of your intake system, increasing both horse power and torque, improving acceleration as well as throttle response. |
| Part #: 51-11572 |
| Price: $355.00 (USD) |
|
|
|
|
|
|
 |
| aFe Stage 2 Intake Kit - E60 525i 530i 2006-2007 N52 engine - ProDry S
(more info) |
"Oil-Free" ProDry S Filter
This intake kit replaces your restrictive factory air box. It features a 16-gauge powder-coated steel heat shield, heat-resistant molded intake tube, trim sealed to seal out hot engine air, and a custom application-specific aFe brand cotton filter.
This version has an oil-free filter media for less maintenance. For the best flowing filter, with the best performance gain, we always recommend the standard aFe "Pro5R " filter (which has a blue pre-oiled filter media), but this oil-free filter flows only slightly less than the blue Pro5R style aFe filter, and requires no re-oiling after cleaning the filter.
By removing your stock intake air box, you are removing the most restrictive portion of your 5 series' intake system, increasing both horse power and torque, improving acceleration as well as throttle response.
Click
here for installation instructions.
|
| Part #: 51-11042 |
| Price: $335.00 (USD) |
|
|
|
|
|
|
 |
| aFe Stage 2 Intake Kit - E60 550i E63 650i 2006-2008 - ProDry S
(more info) |
"Oil-Free" ProDry S Filter
This intake kit replaces your restrictive factory air box. It features a 16-gauge powder-coated steel heat shield, heat-resistant molded intake tube, trim sealed to seal out hot engine air, and a custom application-specific aFe brand cotton filter.
This version has an oil-free filter media for less maintenance. For the best flowing filter, with the best performance gain, we always recommend the standard aFe "Pro5R " filter (which has a blue pre-oiled filter media), but this oil-free filter flows only slightly less than the blue Pro5R style aFe filter, and requires no re-oiling after cleaning the filter.
By removing your stock intake air box, you are removing the most restrictive portion of your intake system, increasing both horse power and torque, improving acceleration as well as throttle response. |
| Part #: 51-11142 |
| Price: $455.00 (USD) |
|
|
|
|
|
|
 |
| aFe Stage 2 Intake Kit - E60 M5 E63 M6 2006-2008 V10 - ProDry S
(more info) |
"Oil-Free" ProDry S Filter
Rid your M5 or M6's V10 powerplant of both of its restrictive factory air boxes with this cold air intake kit by aFe, and you'll cut the airflow restriction IN HALF. Air flow showed an increase of 117% and dyno testing yielded max power gains of 28hp and 24 ft/lbs of torque. The intake tubes of this kit are custom-designed to accelerate airflow for best performance. Fits all 2006, 2007, 2008 and 2009 and V10 M5 and M6.
Kit includes everything necessary to install, including installation instructions. This kit can typically be installed in less than 60 minutes, and uses all factory mounting points (no modifications). The kit uses 2 high performance 360 degree radial flow air filters which are washable/reusable. The filtration media uses the deepest pleats in the industry, allowing the most surface area and airflow possible, in the space allowed. The increased airflow is significant enough that it is audible while driving, giving your 5.0 liter V10 a subtly more aggressive sound when revving or under load. Best of all, this is a SAFE product that will not cause any longevity issues or malfunctions to your BMW's intricate engine management system.
This aFe Cold Air Intake Kit fits the following BMWs:
2006,2007,2008,2009 E60 M5 Sedan
2006,2007,2008,2009 E63 M6 Coupe
2006,2007,2008,2009 E64 M6 Convertible
Click
here for installation instructions.
|
| Part #: 51-11272 |
| Price: $729.00 (USD) |
|
|
|
|
|
|
 |
| aFe Stage 2 Intake Kit - E82/E88 135i, E90/E92 335i & 335xi, and E60 535i & 535xi - Pro5R
(more info) |
Maxiumum Flow Pro5R Filter
TIncrease horse power and torque in your twin-turbo charged BMW 135i, 335i, 335xi, 535i or 535xi with this twin-filter element aFe cold air intake system. aFe has reported gains of 27hp and 34 ft/lbs of torque with this kit, which increases airflow 98% over the stock airbox. Installs in under an hour!
This BMW 335i air intake system is one of the easiest and most effective ways to increase your BMW's performance. The kit includes all parts and installation instructions to replace the restrictive factory air box with a low-restriction, high-flow filtering system. The kit includes a one-piece precision molded twin intake tube, 16 gauge powder coated steel heat shield, and gasket -- all assisting in blocking out hot engine air for cooler, denser air mass.
This version uses aFe's highest flowing filter media, which uses a lightly oil gauze to filter out dirt and particulates, while allowing more air to flow to the intake. For the best flowing filter, with the best performance gain, we always recommend this standard aFe filter media (often called "Pro5R ", which has a blue pre-oiled filter media). We also carry this filter in the "ProDry" grey filter media, which is oil-free for only slightly less performance and no maintenance.
This aFe Intake Kit fits the following BMWs:
2007-2010 E90 3 Series Sedan BMW 335i & 335xi
2007-2010 E92 3 Series Coupe BMW 335i & 335xi
2010+ E92 3 Series Coupe BMW 335is
2008-2010 E82 1 Series Coupe BMW 135i
2011+ E82 1 Series Coupe BMW 1M Coupe
2008-2010 E88 1 Series Convertible BMW 135i
2007-2010 E60 5 Series BMW 535i & 535xi
|
| Part #: 54-11472 |
| Price: $365.00 (USD) |
|
|
|
|
|
|
 |
| aFe Stage 2 Pro5R Intake Kit - E60 525i & 530i - Pro5R
(more info) |
Maxiumum Flow Pro5R Filter
This intake kit replaces your restrictive factory air box. It features a 16-gauge powder-coated steel heat shield, heat-resistant molded intake tube, trim sealed to seal out hot engine air, and a custom application-specific aFe brand cotton filter.
This version uses aFe's highest flowing filter media, which uses a lightly oil gauze to filter out dirt and particulates, while allowing more air to flow to the intake. For the best flowing filter, with the best performance gain, we always recommend this standard aFe filter media (often called "Pro5R ", which has a blue pre-oiled filter media). We also carry this filter in the "ProDry" grey filter media, which is oil-free for only slightly less performance and no maintenance.
By removing your stock intake air box, you are removing the most restrictive portion of your 5 series' intake system, increasing both horse power and torque, improving acceleration as well as throttle response.
Click
here for installation instructions.
|
| Part #: 54-11042 |
| Price: $335.00 (USD) |
|
|
|
|
|
|
 |
| aFe Stage 2 Pro5R Intake Kit - E60 550i, E63 650i - Pro5R
(more info) |
Maxiumum Flow Pro5R Filter
11.75 hp and 10.50 lb/ft torque gain!
This intake kit replaces your restrictive factory air box. It features a 3-angle velocity stack adapter, heat-block molded intake tube, 16-gauge powder-coated steel heat shield, trim sealed to seal out hot engine air, and a custom aFe brand cotton filter.
This version uses aFe's highest flowing filter media, which uses a lightly oil gauze to filter out dirt and particulates, while allowing more air to flow to the intake. For the best flowing filter, with the best performance gain, we always recommend this standard aFe filter media (often called "Pro5R ", which has a blue pre-oiled filter media). We also carry this filter in the "ProDry" grey filter media, which is oil-free for only slightly less performance and no maintenance.
By removing your stock intake air box, you are removing the most restrictive portion of your V8's intake system, increasing both horse power and torque, improving acceleration as well as throttle response.
11.75 hp gain at 5900 rpm
10.50 lb/ft torque at 4000rpm
Click
here for installation instructions.
|
| Part #: 54-11142 |
| Price: $455.00 (USD) |
|
|
|
|
|
|
 |
| aFe Stage 2 SI Intake Kit - 335i 135i, 535i Z435 with N54 engine
(more info) |
Add 14 max horsepower and 27 lbs. x ft. torque to your BMW with the N54 Turbo engine! We offer several aFe Intake Kits for the 135i 335i 535i. The benefit on this system over the less expensive systems is that it is sealed to keep engine heat out while allowing maximum air flow. The molded plastic intake box smoothly directs increased air flow for improved volumetric efficiency and maximum performance. So effective is the design that Intake Air Temperature (IAT) at normal running speeds with this aFe intake system is 11 degrees cooler than the factory intake. Easily accessible with a satin black powder coated aluminum cover, an washable/reusable conical air filter is enclosed in a molded plastic housing and mounted on a oval intake tube that smoothly supplies maximum air to the twin turbos. Click Here for Installation Instructions
Choose from Pro 5 R - oiled filter or ProDry S - dry filter. The Pro 5 R filter is aFe's highest flowing filter media, which uses a lightly oil gauze to filter out dirt and particulates, while allowing more air to flow to the intake. For the best flowing filter, with the best performance gain, we always recommend this standard aFe filter media (often called "Pro5R ", which has a blue pre-oiled filter media). We also carry this filter in the "ProDry S" grey filter media, which is oil-free for only slightly less performance and no maintenance.
This item fits the following BMWs:
2008-2010 E82 BMW 135i
2010+ E82 BMW 1M Coupe
2006-2010 E90 BMW 335i 335xi 335i xDrive
2007-2010 E92 BMW 335i 335is 335xi 335i xDrive
2011 E92 BMW 335is
2007-2010 E93 BMW 335i
2011 E93 BMW 335is
2004-2010 E60 BMW 535i 535xi 535i xDrive
2009-2010 Z4 BMW Z4 sDrive35i Z4 sDrive35is
|
| Part #: 54-8200X |
| Price: $495.00 (USD) |
|
|
|
|
|
|
|
 |
| aFe SuperStock Intake - E60 M5 - E63 M6 (Filter, Intake Scoops & Restore Kit) - Pro5R
(more info) |
Maxiumum Flow Pro5R Filter
Increase your intake flow by 45%, by upgrading your E60 BMW M5 or E63 BMW M6 stock paper intake filter with an aFe High Performance air filter and the Dynamic Air Scoops (D.A.S.) which install behind the front grills of your M5 or M6 to direct more cool air to the intake. The air scoops are a direct fit for the E60 M5 E63 M6 and installs simply and easily using common tools (instruction included), and maintains the stock air box for a "stealth" install. Both the air scoops and the filter work in tandem; The high efficiency aFe air filter reduces restriction through the filter, while the Dynamic Air Scoops direct more of the fresh/cool air coming into the nose grills into the intake. More cool air, less restriction, and more precious power.
This kit includes 2 stock-replacement air filter element, (2) dynamic air scoops (left and right), as well as filter restore kit for cleaning and reconditioning the re-useable filter element (a $12.49 value!).
This aFe Super Stock Filter & Intake Scoop kit fits the following BMWs:
2006+ E60 BMW M5
2006+ E63 BMW M6 coupe & Convertible
This version uses aFe's highest flowing filter media, which uses a lightly oil gauze to filter out dirt and particulates, while allowing more air to flow to the intake. For the best flowing filter, with the best performance gain, we always recommend this standard aFe filter media (often called "Pro5R ", which has a blue pre-oiled filter media). We also carry this filter in the "ProDry" grey filter media, which is oil-free for only slightly less performance and no maintenance. |
| Part #: 55-11270 |
| Price: $345.00 (USD) |
|
|
|
|
|
|
 |
| aFe SuperStock Intake - E60 M5 - E63 M6 (Filter, Intake Scoops & Restore Kit) - ProDry S
(more info) |
"Oil-Free" ProDry S Filter
Increase your intake flow by 45%, by upgrading your E60 BMW M5 or E63 BMW M6 stock paper intake filter with an aFe High Performance air filter and the Dynamic Air Scoops (D.A.S.) which install behind the front grills of your M5 or M6 to direct more cool air to the intake. The air scoops are a direct fit for the E60 M5 E63 M6 and installs simply and easily using common tools (instruction included), and maintains the stock air box for a "stealth" install. Both the air scoops and the filter work in tandem; The high efficiency aFe air filter reduces restriction through the filter, while the Dynamic Air Scoops direct more of the fresh/cool air coming into the nose grills into the intake. More cool air, less restriction, and more precious power.
This kit includes 2 stock-replacement air filter element, (2) dynamic air scoops (left and right), as well as filter restore kit for cleaning and reconditioning the re-useable filter element (a $12.49 value!).
This aFe Super Stock Filter & Intake Scoop kit fits the following BMWs:
2006+ E60 BMW M5
2006+ E63 BMW M6 coupe & Convertible
This version has an oil-free filter media for less maintenance. For the best flowing filter, with the best performance gain, we always recommend the standard aFe "Pro5R " filter (which has a blue pre-oiled filter media), but this oil-free filter flows only slightly less than the blue Pro5R style aFe filter, and requires no re-oiling after cleaning the filter. |
| Part #: 55-11271 |
| Price: $345.00 (USD) |
|
|
|
|
|
|
 |
| aFe Throttle Body Spacer - E53 X5, E60 E63 E64 E39
(more info) |
Silver Bullet throttle body spacers create turbulence in the air flow at the point just prior entry into the engine increasing horsepower, torque - +5 hp, +2.5 lbs/ft torque - and improving throttle response and fuel efficiency. Silver Bullet throttle body spacers are constructed out of durable T-6061 billet aluminum and using a unique serrated/helix entry to create turbulence at the manifold while eliminating the annoying whistle found in other helix only throttle spacers. This throttle body spacer is 50-state legal (CARB E.O Number D-516-2).
This throttle body spacer fits the following BMWs:
E39 5 series BMW 540i 1997-2003
E60 5 series: BMW 545i 2004-2005
E63 E64 6 series: BMW 645ci, + Convertibles 2004-2005
E65 E66 7 series: BMW 745i, 745li 2002-2005
E53 X5: BMW X5 4.4i 4.6is 2000-2006 |
| Part #: 46-31001 |
| Price: $154.95 (USD) |
|
|
|
|
|
|
 |
| aFe Throttle Body Spacer - E60 550i E63 650i E53 X5 4.8is
(more info) |
Silver Bullet throttle body spacers create turbulence in the air flow at the point just prior entry into the engine increasing horsepower, torque - +10 hp, +14 lbs/ft torque - and improving throttle response and fuel efficiency. Silver Bullet throttle body spacers are constructed out of durable T-6061 billet aluminum and using a unique serrated/helix entry to create turbulence at the manifold while eliminating the annoying whistle found in other helix only throttle spacers. This throttle body spacer is 50-state legal (CARB E.O Number D-516-2). Click here for installation instructions
This item fits the following BMWs:
2004-2010 E60 BMW 550i
2004-2010 E63 BMW 650i
2002-2008 E65 BMW 750i 750li
2004-2006 E53 BMW X5 4.8is
|
| Part #: 46-31006 |
| Price: $149.95 (USD) |
|
|
|
|
|
|
|
(E60) 5-Series 2004 on
aFe Cold-Air Intake Kits
_30-80168_sm.jpg)
_31-80168_sm.jpg)
