 |
| aFe Dynamic Air Scoops (DAS)- - E60 M5 - E63 M6
(more info) |
 Direct more fresh cool air from your BMW's center/nose grills to your intake, with the aFe D.A.S. (Dynamic Air Scoops). These two "scoops" install behind your front grills to direct more airflow into the factory intake snorkel used on the 2006-2010 M5 and 2006+ M6. Scoops are a direct bolt-in install, and include installation instructions and required hardware for a simple install. When combined with a higher flowing filter, such as the aFe stock replacement filter these scoops help get the maximum benefit of a higher efficiency filter by providing more cool, fresh outside air directly into the intake snorkel. |
| Part #: 54-11278 |
| Price: $255.00 (USD) |
|
|
|
|
|
|
 |
| aFe Intake Kit - E60 M5 & E63/E64 M6 V10 - Pro5R
(more info) |
Maxiumum Flow Pro5R Filter
Rid your M5 or M6's V10 powerplant of both of its restrictive factory air boxes with this cold air intake kit by aFe, and you'll cut the airflow restriction IN HALF. Air flow showed an increase of 117% and dyno testing yielded max power gains of 28hp and 24 ft/lbs of torque. The intake tubes of this kit are custom-designed to accelerate airflow for best performance. Fits all 2006, 2007, 2008 and 2009 and V10 M5 and M6.
Kit includes everything necessary to install, including installation instructions. This kit can typically be installed in less than 60 minutes, and uses all factory mounting points (no modifications). The kit uses 2 high performance 360 degree radial flow air filters which are washable/reusable. The filtration media uses the deepest pleats in the industry, allowing the most surface area and airflow possible, in the space allowed. The increased airflow is significant enough that it is audible while driving, giving your 5.0 liter V10 a subtly more aggressive sound when revving or under load. Best of all, this is a SAFE product that will not cause any longevity issues or malfunctions to your BMW's intricate engine management system.
This version uses aFe's highest flowing filter media, which uses a lightly oil gauze to filter out dirt and particulates, while allowing more air to flow to the intake. For the best flowing filter, with the best performance gain, we always recommend this standard aFe filter media (often called "Pro5R ", which has a blue pre-oiled filter media). We also carry this filter in the "ProDry" grey filter media, which is oil-free for only slightly less performance and no maintenance.
This aFe Cold Air Intake Kit fits the following BMWs:
2006,2007,2008,2009 BMW E60 M5 Sedan
2006,2007,2008,2009 BMW E63 M6 Coupe
2006,2007,2008,2009 E64 M6 Convertible
 Click
here for installation instructions.
|
| Part #: 54-11272 |
| Price: $729.00 (USD) |
|
|
|
|
|
|
 |
| aFe Restore Kit
(more info) |
| aFe's highly refined oil is proven less likely to foul MAF sensors than other oil. It works great with aFe filters and is a great way to upgrade competitive oiled filters. aFe cleaner is specially formulated to release dirt without harming the microfibers critical to efficient filtration. It has a simple three step restoration procedure. Available in either aerosol or squeeze bottle. |
| Part #: 90-50501XX |
Regular Price: $11.45 (USD)
Sale Price: $10.31 (USD) |
|
|
|
|
|
|
|
 |
| aFe Stage 1 Intake Kit - E60 545i, E63 645ci 2004-2005 - ProDry S
(more info) |
"Oil-Free" ProDry S Filter
This intake kit replaces your restrictive factory air box. It features a 3-angle aluminum velocity stack adapter, 16-gauge powder-coated steel heat shield, trim sealed to seal out hot engine air, and a custom aFe brand cotton filter.
This version has an oil-free filter media for less maintenance. For the best flowing filter, with the best performance gain, we always recommend the standard aFe "Pro5R " filter (which has a blue pre-oiled filter media), but this oil-free filter flows only slightly less than the blue Pro5R style aFe filter, and requires no re-oiling after cleaning the filter.
By removing your stock intake air box, you are removing the most restrictive portion of your intake system, increasing both horse power and torque, improving acceleration as well as throttle response. |
| Part #: 51-11081 |
| Price: $299.00 (USD) |
|
|
|
|
|
|
 |
| aFe Stage 1 Pro5R Intake Kit - E60 545i, E63 645ci 2004-2005 - Pro5R
(more info) |
Maxiumum Flow Pro5R Filter
This intake kit replaces your restrictive factory air box. It features a 3-angle aluminum velocity stack adapter, 16-gauge powder-coated steel heat shield, trim sealed to seal out hot engine air, and a custom aFe brand cotton filter.
This version uses aFe's highest flowing filter media, which uses a lightly oil gauze to filter out dirt and particulates, while allowing more air to flow to the intake. For the best flowing filter, with the best performance gain, we always recommend this standard aFe filter media (often called "Pro5R ", which has a blue pre-oiled filter media). We also carry this filter in the "ProDry" grey filter media, which is oil-free for only slightly less performance and no maintenance.
By removing your stock intake air box, you are removing the most restrictive portion of your intake system, increasing both horse power and torque, improving acceleration as well as throttle response. |
| Part #: 54-11081 |
| Price: $299.00 (USD) |
|
|
|
|
|
|
 |
| aFe Stage 2 Intake Kit - E60 550i E63 650i 2006-2008 - ProDry S
(more info) |
"Oil-Free" ProDry S Filter
This intake kit replaces your restrictive factory air box. It features a 16-gauge powder-coated steel heat shield, heat-resistant molded intake tube, trim sealed to seal out hot engine air, and a custom application-specific aFe brand cotton filter.
This version has an oil-free filter media for less maintenance. For the best flowing filter, with the best performance gain, we always recommend the standard aFe "Pro5R " filter (which has a blue pre-oiled filter media), but this oil-free filter flows only slightly less than the blue Pro5R style aFe filter, and requires no re-oiling after cleaning the filter.
By removing your stock intake air box, you are removing the most restrictive portion of your intake system, increasing both horse power and torque, improving acceleration as well as throttle response. |
| Part #: 51-11142 |
| Price: $455.00 (USD) |
|
|
|
|
|
|
 |
| aFe Stage 2 Intake Kit - E60 M5 E63 M6 2006-2008 V10 - ProDry S
(more info) |
"Oil-Free" ProDry S Filter
Rid your M5 or M6's V10 powerplant of both of its restrictive factory air boxes with this cold air intake kit by aFe, and you'll cut the airflow restriction IN HALF. Air flow showed an increase of 117% and dyno testing yielded max power gains of 28hp and 24 ft/lbs of torque. The intake tubes of this kit are custom-designed to accelerate airflow for best performance. Fits all 2006, 2007, 2008 and 2009 and V10 M5 and M6.
Kit includes everything necessary to install, including installation instructions. This kit can typically be installed in less than 60 minutes, and uses all factory mounting points (no modifications). The kit uses 2 high performance 360 degree radial flow air filters which are washable/reusable. The filtration media uses the deepest pleats in the industry, allowing the most surface area and airflow possible, in the space allowed. The increased airflow is significant enough that it is audible while driving, giving your 5.0 liter V10 a subtly more aggressive sound when revving or under load. Best of all, this is a SAFE product that will not cause any longevity issues or malfunctions to your BMW's intricate engine management system.
This aFe Cold Air Intake Kit fits the following BMWs:
2006,2007,2008,2009 E60 M5 Sedan
2006,2007,2008,2009 E63 M6 Coupe
2006,2007,2008,2009 E64 M6 Convertible
Click
here for installation instructions.
|
| Part #: 51-11272 |
| Price: $729.00 (USD) |
|
|
|
|
|
|
 |
| aFe Stage 2 Pro5R Intake Kit - E60 550i, E63 650i - Pro5R
(more info) |
Maxiumum Flow Pro5R Filter
11.75 hp and 10.50 lb/ft torque gain!
This intake kit replaces your restrictive factory air box. It features a 3-angle velocity stack adapter, heat-block molded intake tube, 16-gauge powder-coated steel heat shield, trim sealed to seal out hot engine air, and a custom aFe brand cotton filter.
This version uses aFe's highest flowing filter media, which uses a lightly oil gauze to filter out dirt and particulates, while allowing more air to flow to the intake. For the best flowing filter, with the best performance gain, we always recommend this standard aFe filter media (often called "Pro5R ", which has a blue pre-oiled filter media). We also carry this filter in the "ProDry" grey filter media, which is oil-free for only slightly less performance and no maintenance.
By removing your stock intake air box, you are removing the most restrictive portion of your V8's intake system, increasing both horse power and torque, improving acceleration as well as throttle response.
11.75 hp gain at 5900 rpm
10.50 lb/ft torque at 4000rpm
Click
here for installation instructions.
|
| Part #: 54-11142 |
| Price: $455.00 (USD) |
|
|
|
|
|
|
 |
| aFe SuperStock Intake - E60 M5 - E63 M6 (Filter, Intake Scoops & Restore Kit) - Pro5R
(more info) |
Maxiumum Flow Pro5R Filter
Increase your intake flow by 45%, by upgrading your E60 BMW M5 or E63 BMW M6 stock paper intake filter with an aFe High Performance air filter and the Dynamic Air Scoops (D.A.S.) which install behind the front grills of your M5 or M6 to direct more cool air to the intake. The air scoops are a direct fit for the E60 M5 E63 M6 and installs simply and easily using common tools (instruction included), and maintains the stock air box for a "stealth" install. Both the air scoops and the filter work in tandem; The high efficiency aFe air filter reduces restriction through the filter, while the Dynamic Air Scoops direct more of the fresh/cool air coming into the nose grills into the intake. More cool air, less restriction, and more precious power.
This kit includes 2 stock-replacement air filter element, (2) dynamic air scoops (left and right), as well as filter restore kit for cleaning and reconditioning the re-useable filter element (a $12.49 value!).
This aFe Super Stock Filter & Intake Scoop kit fits the following BMWs:
2006+ E60 BMW M5
2006+ E63 BMW M6 coupe & Convertible
This version uses aFe's highest flowing filter media, which uses a lightly oil gauze to filter out dirt and particulates, while allowing more air to flow to the intake. For the best flowing filter, with the best performance gain, we always recommend this standard aFe filter media (often called "Pro5R ", which has a blue pre-oiled filter media). We also carry this filter in the "ProDry" grey filter media, which is oil-free for only slightly less performance and no maintenance. |
| Part #: 55-11270 |
| Price: $345.00 (USD) |
|
|
|
|
|
|
 |
| aFe SuperStock Intake - E60 M5 - E63 M6 (Filter, Intake Scoops & Restore Kit) - ProDry S
(more info) |
"Oil-Free" ProDry S Filter
Increase your intake flow by 45%, by upgrading your E60 BMW M5 or E63 BMW M6 stock paper intake filter with an aFe High Performance air filter and the Dynamic Air Scoops (D.A.S.) which install behind the front grills of your M5 or M6 to direct more cool air to the intake. The air scoops are a direct fit for the E60 M5 E63 M6 and installs simply and easily using common tools (instruction included), and maintains the stock air box for a "stealth" install. Both the air scoops and the filter work in tandem; The high efficiency aFe air filter reduces restriction through the filter, while the Dynamic Air Scoops direct more of the fresh/cool air coming into the nose grills into the intake. More cool air, less restriction, and more precious power.
This kit includes 2 stock-replacement air filter element, (2) dynamic air scoops (left and right), as well as filter restore kit for cleaning and reconditioning the re-useable filter element (a $12.49 value!).
This aFe Super Stock Filter & Intake Scoop kit fits the following BMWs:
2006+ E60 BMW M5
2006+ E63 BMW M6 coupe & Convertible
This version has an oil-free filter media for less maintenance. For the best flowing filter, with the best performance gain, we always recommend the standard aFe "Pro5R " filter (which has a blue pre-oiled filter media), but this oil-free filter flows only slightly less than the blue Pro5R style aFe filter, and requires no re-oiling after cleaning the filter. |
| Part #: 55-11271 |
| Price: $345.00 (USD) |
|
|
|
|
|
|
 |
| aFe Throttle Body Spacer - E53 X5, E60 E63 E64 E39
(more info) |
Silver Bullet throttle body spacers create turbulence in the air flow at the point just prior entry into the engine increasing horsepower, torque - +5 hp, +2.5 lbs/ft torque - and improving throttle response and fuel efficiency. Silver Bullet throttle body spacers are constructed out of durable T-6061 billet aluminum and using a unique serrated/helix entry to create turbulence at the manifold while eliminating the annoying whistle found in other helix only throttle spacers. This throttle body spacer is 50-state legal (CARB E.O Number D-516-2).
This throttle body spacer fits the following BMWs:
E39 5 series BMW 540i 1997-2003
E60 5 series: BMW 545i 2004-2005
E63 E64 6 series: BMW 645ci, + Convertibles 2004-2005
E65 E66 7 series: BMW 745i, 745li 2002-2005
E53 X5: BMW X5 4.4i 4.6is 2000-2006 |
| Part #: 46-31001 |
| Price: $154.95 (USD) |
|
|
|
|
|
|
 |
| aFe Throttle Body Spacer - E60 550i E63 650i E53 X5 4.8is
(more info) |
Silver Bullet throttle body spacers create turbulence in the air flow at the point just prior entry into the engine increasing horsepower, torque - +10 hp, +14 lbs/ft torque - and improving throttle response and fuel efficiency. Silver Bullet throttle body spacers are constructed out of durable T-6061 billet aluminum and using a unique serrated/helix entry to create turbulence at the manifold while eliminating the annoying whistle found in other helix only throttle spacers. This throttle body spacer is 50-state legal (CARB E.O Number D-516-2). Click here for installation instructions
This item fits the following BMWs:
2004-2010 E60 BMW 550i
2004-2010 E63 BMW 650i
2002-2008 E65 BMW 750i 750li
2004-2006 E53 BMW X5 4.8is
|
| Part #: 46-31006 |
| Price: $149.95 (USD) |
|
|
|
|
|
|
|
(E63/E64) 6-Series 2004-2010
aFe Cold-Air Intake Kits
_30-80168_sm.jpg)
_31-80168_sm.jpg)
