Current BMW:

(E70) X5 2007+ Clear BMW chassis

BMW E70 Intake

aFe Cold-Air Intake Kits

aFe Throttle Body Spacer - E60 550i E63 650i E53 X5 4.8is (more info)

Silver Bullet throttle body spacers create turbulence in the air flow at the point just prior entry into the engine increasing horsepower, torque - +10 hp, +14 lbs/ft torque - and improving throttle response and fuel efficiency. Silver Bullet throttle body spacers are constructed out of durable T-6061 billet aluminum and using a unique serrated/helix entry to create turbulence at the manifold while eliminating the annoying whistle found in other helix only throttle spacers. This throttle body spacer is 50-state legal (CARB E.O Number D-516-2). Click here for installation instructions

This item fits the following BMWs:
2004-2010 E60 BMW 550i
2004-2010 E63 BMW 650i
2002-2008 E65 BMW 750i 750li
2004-2006 E53 BMW X5 4.8is

Part #: 46-31006

Price: $149.95 (USD)

aFe Performance Air Filters

aFe Pro5R Air Filter - E70 X5 3.0si (more info)

Improve your 2007-2010 E70 X5 3.0si intake air flow by up to 61%, simply by removing the restrictive stock paper air filter element out, and replacing it with a high performance aFe drop-in air filter. Installs in your airbox in only minutes. This version used aFe's highest flowing filter media, which uses a lightly oil gauze to filter out dirt and particulates, while allowing more air to flow to the intake. For the best flowing filter, with the best performance gain, we always recommend this standard aFe filter media (often called "Pro5R ", which has a blue pre-oiled filter media). We also carry this filter in the "ProDry" grey filter media, which is oil-free for only slightly less performance and no maintenance. This "standard" aFe blue filter media comes pre-oiled, ready to install in your BMW.

This item fits the following BMWs:
2007-2010 E70 BMW X5 3.0si X5 xDrive30i

Part #: 30-10182

Price: $71.35 (USD)

aFe Pro5R S Air Filter - E70 X5 35i, X6 35i, F01 740i, F25 X3 35I (more info)

This is a drop-in stock replacement aFe performance air filter that installs into your BMW's factory airbox. This version used aFe's highest flowing filter media, which uses a lightly oil gauze to filter out dirt and particulates, while allowing more air to flow to the intake. For the best flowing filter, with the best performance gain, we always recommend this standard aFe filter media (often called "Pro5R ", which has a blue pre-oiled filter media). We also carry this filter in the "ProDry" grey filter media, which is oil-free for only slightly less performance and no maintenance.

This item fits the following BMWs:
2010+ F07 BMw 535i GT, 535i xDrive GT
2010+ F01 BMW 740i 740li
2011+ F25 BMW X3 xDrive35i
2009+ E70 BMW X5 xDrive35i
2007+ E71 BMW X6 xDrive35i

Part #: 30-10197

Price: $59.95 (USD)

aFe ProDry S Air Filter - E70 X5 3.0si (more info)

This is a drop-in stock replacement aFe performance air filter that installs into your BMW's factory airbox. This version has an oil-free filter media for less maintenance. For the best flowing filter, with the best performance gain, we always recommend the standard aFe "Pro5R " filter (which has a blue pre-oiled filter media), but this oil-free filter flows only slightly less than the blue Pro5R style aFe filter, and requires no re-oiling after cleaning the filter.

This item fits the following BMWs:
2007-2010 E70 BMW X5 3.0si X5 xDrive30i

Part #: 31-10182

Price: $71.35 (USD)

aFe ProDry S Air Filter - E70 X5 35i, X6 35i, F01 740i. F25 X3 35I (more info)

Part #: 31-10197

Price: $59.95 (USD)

Intake Kits and Individual Intake Components

CRC Mass Air Flow Sensor Cleaner, 11 Oz Can (more info)

CRC HFM cleaner is specifically developed to clean mass air flow sensors. Increases horsepower & improves air/fuel ratio and MPG. Plastic safe-dries in seconds! Perfect for cars that have had "over-oiled" performance filters installed. Over-oiling can cause the HFM to gum up, this is the perfect solution. This item cannot ship air freight or internationally. UPS Ground shipping to the lower 48 US states only.

Part #: 05110

Price: $11.95 (USD)

ITG Foam Filter for Eurosport/Conforti Intake Kits (more info)

Replacement ITG Foam Filter for Conforti Intake Kits. Available in 3" and 3.5" opening (see below for applications) or check your filter box for correct appliaction. Filter comes pre-oiled but oil recharge kit is recommended for future maintenance.

Click here for approved cleaning methods for ITG foam filters.

Applications:
3.5" (blue box): all Euro HFM kits (E36 M3, MZ3), E46 330, late E46 325, E39 530, E39 540, Z3 3.0
3.0" (green box): all other models not listed above (E36 M3/MZ3 with stock HFM, E36 325/328, E46 323/328, E39 525/528, Z3 2.3/2.8)

Part #: JC60/73 / JC60/86

Price: $84.95 (USD)

No-Toil Foam Filter Oil (for ITG Filters) (more info)

Don't use harsh solvents like gasoline to clean your ITG on your Eurosport/Conforti intake kit (or similar foam filter element). This product is all you need to maintain your ITG foam filter, and is recommend for use with all Conforti Cold-Air Intake Kits.

When cleaning an ITG foam filter, ITG recommends using warm water and a mild detergent (simple dish soap is fine). Strong detergents and solvents can harm the foam, and cause the filter to break down. Once dirt, dust and debris are rinsed out of the filter, it should be re-oiled to ensure proper function of the filter. ITG recommends No-Toil filter oil, as it is safe to the foam filter media, and is completely waterproof. Drive with more peace of mind through heavy rain and puddles.

Please note, as this product is an aerosol, it MUST BE SHIPPED BY UPS GROUND. Sorry, this can not be shipped outside of the US/Canda.

Part #: NTO-AEROSOL

Price: $10.95 (USD)

Throttle Body

aFe Throttle Body Spacer - E60 550i E63 650i E53 X5 4.8is (more info)

Part #: 46-31006

Price: $149.95 (USD)