Current BMW:

(E82) 1-series 2008+ Coupe Clear BMW chassis

BMW E82 Intake

aFe Cold-Air Intake Kits

aFe Dynamic Air Scoops (DAS) - E82/E88 1 Series 128i & 135i (more info)

Direct more fresh cool air from your BMW's center/nose grills to your intake, with the aFe D.A.S. (Dynamic Air Scoops). These two "scoops" install behind your front grills to direct more airflow into the factory intake snorkel used on the 2008, 2009 (and newer) E82 and E88 1 series BMWs, including 128i and 135i. Scoops are a direct bolt-in install, and include installation instructions and required hardware for a simple install. When combined with a higher flowing filter, such as the aFe stock replacement filter or twin filter system (135i only), these scoops help get the maximum benefit of a higher efficiency filter by providing more cool, fresh outside air directly into the intake snorkel. Both the 3.0 naturally aspirated and twin turbo models (especially the 135i turbo) need this added air flow for best horsepower and torque.

These aFe Intake Scoops fit the following BMWs:
2008+ E82 1 Series Coupe BMW 128i & 135i coupe
2008+ E88 1 Series Convertible BMW 128i & 135i convertible

Part #: 54-11648

Price: $109.00 (USD)

aFe Intake Kit - Pro5R - E82 128i, E90-E92 325i, 328i, 330i (more info)

Maxiumum Flow Pro5R Filter

This intake kit replaces your restrictive factory air box. It features a 3-angle velocity stack adapter, 16-gauge powder-coated steel heat shield, trim sealed to seal out hot engine air, and a custom aFe brand cotton filter.

This version uses aFe's highest flowing filter media, which uses a lightly oil gauze to filter out dirt and particulates, while allowing more air to flow to the intake. For the best flowing filter, with the best performance gain, we always recommend this standard aFe filter media (often called "Pro5R ", which has a blue pre-oiled filter media). We also carry this filter in the "ProDry" grey filter media, which is oil-free for only slightly less performance and no maintenance.

By removing your stock intake air box, you are removing the most restrictive portion of your engine's intake system, increasing both horse power and torque, improving acceleration as well as throttle response.

This aFe intake fits the following BMWs:
2008+ E82 BMW 128i
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi - Sedan
2006-2011 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007+ E92 BMW 328i 328xi 328i xDrive - Coupe
2007+ E93 BMW 328i - Convertible

Part #: 54-11012

Price: $355.00 (USD)

aFe Intake Kit - Stage 2 Si - E82 128i, E90-E92 325i, 328i, 330i (more info)

This Stage 2 Sealed Intake produces 12HP, 15LBS. x FT. of torque and outflows the factory intake by 56%. This sealed air intake system features a washable/reusable 6" conical air filter with inverted top that improves airflow for increased horsepower, torque and throttle response. The air filter is constructed with 100% polyurethane for long life and multiple cleaning cycles.The sealed housing features two auxiliary air inlet ducts for increased airflow. To finish off your underhood appearance, an attractive vacuum formed ABS plastic cover with carbon fiber finish is used to provide easy access to the filter for servicing and an aggressive look. To complete this system, a dyno tuned molded plastic intake tube with velocity stack adapter replaces the stock intake tract and directs air flow with improved volumetric efficiency for maximum intake velocity.

Vacuum Formed ABS Carbon Fiber Finish Cover - This intake is topped with a vacuum formed ABS carbon fiber finish cover that seals out hot intake air and provides an aggressive yet elegant look to your 3-series.

6" Conical Air Filter with Inverted Top - Choose either Pro Dry S performance air filter for maximum convenience or Pro5r oiled filter for maximum flow for increased horsepower and torque.

Fully Sealed Design - aFe engineers have designed a very sophisticated 2-piece sealed intake that keeps out warm underhood air and brings in cooler, outside air for a denser air intake charge.

Mounts In Factory Location - aFe has developed this intake to provide a hassle-free installation that utilizes all factory mounting locations.

This aFe intake fits the following BMWs:
2008+ E82 BMW 128i
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi - Sedan
2006-2011 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007+ E92 BMW 328i 328xi 328i xDrive - Coupe
2007+ E93 BMW 328i - Convertible

Part #: 54-81012-X

Price: $529.00 (USD)

aFe Stage 2 Intake Kit - E82 E88 135i 2008-2010 - Pro5R (more info)

Maxiumum Flow Pro5R Filter

This intake kit replaces your restrictive factory air box. It features a 16-gauge powder-coated steel heat shield, heat-resistant molded intake tube, trim sealed to seal out hot engine air, and a custom application-specific aFe brand cotton filter.

This version uses aFe's highest flowing filter - the Pro 5 R. This filter uses a 5-layer, lightly-oiled cotton gauze material to filter out dirt and particulates, while improving airflow through the intake. For the best flowing filter, with the best performance gain, we always recommend the oiled aFe filter over the dry versions. The Pro 5 R filter is washable and re-oiled using aFe's approved Restore Kit.

By removing your stock intake air box, you are removing the most restrictive portion of your intake system, increasing both horse power and torque, improving acceleration as well as throttle response.

This item fits the following BMWs:
2008-2010 E82 BMW 135i

Part #: 54-11643

Price: $407.00 (USD)

aFe Stage 2 Intake Kit - E82 E88 135i 2008-2010 - ProDry S (more info)

"Oil-Free" ProDry S Filter

This intake kit replaces your restrictive factory air box. It features a 16-gauge powder-coated steel heat shield, heat-resistant molded intake tube, trim sealed to seal out hot engine air, and a custom application-specific aFe brand cotton filter.

This version has an oil-free filter media for less maintenance. For the best flowing filter, with the best performance gain, we always recommend the standard aFe "Pro5R " filter (which has a blue pre-oiled filter media), but this oil-free filter flows only slightly less than the blue Pro5R style aFe filter, and requires no re-oiling after cleaning the filter.

By removing your stock intake air box, you are removing the most restrictive portion of your intake system, increasing both horse power and torque, improving acceleration as well as throttle response.

Part #: 51-11643

Price: $407.00 (USD)

aFe Stage 2 Intake Kit - E82/E88 135i, E90/E92 335i & 335xi, and E60 535i & 535xi - Pro5R (more info)

Maxiumum Flow Pro5R Filter

TIncrease horse power and torque in your twin-turbo charged BMW 135i, 335i, 335xi, 535i or 535xi with this twin-filter element aFe cold air intake system. aFe has reported gains of 27hp and 34 ft/lbs of torque with this kit, which increases airflow 98% over the stock airbox. Installs in under an hour!

This BMW 335i air intake system is one of the easiest and most effective ways to increase your BMW's performance. The kit includes all parts and installation instructions to replace the restrictive factory air box with a low-restriction, high-flow filtering system. The kit includes a one-piece precision molded twin intake tube, 16 gauge powder coated steel heat shield, and gasket -- all assisting in blocking out hot engine air for cooler, denser air mass.

This version uses aFe's highest flowing filter media, which uses a lightly oil gauze to filter out dirt and particulates, while allowing more air to flow to the intake. For the best flowing filter, with the best performance gain, we always recommend this standard aFe filter media (often called "Pro5R ", which has a blue pre-oiled filter media). We also carry this filter in the "ProDry" grey filter media, which is oil-free for only slightly less performance and no maintenance.

This aFe Intake Kit fits the following BMWs:
2007-2010 E90 3 Series Sedan BMW 335i & 335xi
2007-2010 E92 3 Series Coupe BMW 335i & 335xi
2010+ E92 3 Series Coupe BMW 335is
2008-2010 E82 1 Series Coupe BMW 135i
2011+ E82 1 Series Coupe BMW 1M Coupe
2008-2010 E88 1 Series Convertible BMW 135i
2007-2010 E60 5 Series BMW 535i & 535xi

Part #: 54-11472

Price: $365.00 (USD)

aFe Stage 2 Intake Kit - E90/92/93 335i, 2007-2010, E82 135i, E60 535i - ProDry S (more info)

"Oil-Free" ProDry S Filter

Increase horse power and torque in your twin-turbo charged BMW 135i, 335i, 335xi, 535i or 535xi with this twin-filter element aFe cold air intake system. aFe has reported gains of 27hp and 34 ft/lbs of torque with this kit, which increases airflow 98% over the stock airbox. Installs in under an hour!

The aFe Intake system is one of the easiest and most effective ways to increase your BMW's performance. The kit includes all parts and installation instructions to replace the restrictive factory air box with a low-restriction, high-flow filtering system. The kit includes a one-piece precision molded twin intake tube, 16 gauge powder coated steel heat shield, and gasket -- all assisting in blocking out hot engine air for cooler, denser air mass.

This aFe Intake Kit fits the following BMWs:
2007-2010 E90 3 Series Sedan - BMW 335i & 335xi
2007-2010 E92 3 Series Coupe - BMW 335i & 335xi
2010+ E92 3 Series Coupe - BMW 335is
2008-2010 E82 1 Series Coupe - BMW 135i
2011+ E82 1 Series Coupe - BMW 1M Coupe
2008-2010 E88 1 Series Convertible - BMW 135i
2007-2010 E60 5 Series - BMW 535i & 535xi

Part #: 51-11472

Price: $365.00 (USD)

aFe Stage 2 SI Intake Kit - 335i 135i, 535i Z435 with N54 engine (more info)

Add 14 max horsepower and 27 lbs. x ft. torque to your BMW with the N54 Turbo engine! We offer several aFe Intake Kits for the 135i 335i 535i. The benefit on this system over the less expensive systems is that it is sealed to keep engine heat out while allowing maximum air flow. The molded plastic intake box smoothly directs increased air flow for improved volumetric efficiency and maximum performance. So effective is the design that Intake Air Temperature (IAT) at normal running speeds with this aFe intake system is 11 degrees cooler than the factory intake. Easily accessible with a satin black powder coated aluminum cover, an washable/reusable conical air filter is enclosed in a molded plastic housing and mounted on a oval intake tube that smoothly supplies maximum air to the twin turbos. Click Here for Installation Instructions

Choose from Pro 5 R - oiled filter or ProDry S - dry filter. The Pro 5 R filter is aFe's highest flowing filter media, which uses a lightly oil gauze to filter out dirt and particulates, while allowing more air to flow to the intake. For the best flowing filter, with the best performance gain, we always recommend this standard aFe filter media (often called "Pro5R ", which has a blue pre-oiled filter media). We also carry this filter in the "ProDry S" grey filter media, which is oil-free for only slightly less performance and no maintenance.

This item fits the following BMWs:
2008-2010 E82 BMW 135i
2010+ E82 BMW 1M Coupe
2006-2010 E90 BMW 335i 335xi 335i xDrive
2007-2010 E92 BMW 335i 335is 335xi 335i xDrive
2011 E92 BMW 335is
2007-2010 E93 BMW 335i
2011 E93 BMW 335is
2004-2010 E60 BMW 535i 535xi 535i xDrive
2009-2010 Z4 BMW Z4 sDrive35i Z4 sDrive35is

Part #: 54-8200X

Price: $495.00 (USD)

aFe Throttle Body Spacer - E9X 335i, E82 135i, E60 535i (more info)

Silver Bullet throttle body spacers create turbulence in the air flow at the point just prior entry into the engine increasing horsepower, torque and improving throttle response and fuel efficiency - +6 hp, +3.5 lbs/ft torque. Silver Bullet throttle body spacers are constructed out of durable T-6061 billet aluminum and using a unique serrated/helix entry to create turbulence at the manifold while eliminating the annoying whistle found in other helix only throttle spacers. This throttle body spacer is 50-state legal (CARB E.O Number D-516-2).

Only for cars with N54 engine. Not for cars with N55 engine.

This throttle body spacer fits the following BMWs:
2008-2010 E82 BMW 135i
2010+ E82 BMW 1M Coupe
2006-2010 E90 BMW 335i 335xi 335i xDrive- Sedan
2007-2010 E92 BMW 335i 335is 335xi 335i xDrive - Coupe
2007-2010 E93 BMW 335i - Convertible
2004-2010 E60 BMW 535i 535xi 535i xDrive

Part #: 46-31002

Price: $154.95 (USD)

aFe Performance Air Filters

aFe Pro5R Air Filter - E82 120i, E90 320i, 2004-2008 L4-2.0L (EURO Models Only ) (more info)

This is a drop-in stock replacement aFe performance air filter that installs into your BMW's factory airbox. This particular filter fits the following BMWs:

E82 1 series: 120i 2004-2008 Euro Models Only
E90 3 series: 320i 2004-2008 Euro Models Only

This version uses aFe's highest flowing filter media, which uses a lightly oil gauze to filter out dirt and particulates, while allowing more air to flow to the intake. For the best flowing filter, with the best performance gain, we always recommend this standard aFe filter media (often called "Pro5R ", which has a blue pre-oiled filter media). We also carry this filter in the "ProDry" grey filter media, which is oil-free for only slightly less performance and no maintenance.

Part #: 10-10110

Price: $52.95 (USD)

aFe Pro5R Air Filter - E82 125i, 130i, E90 325i, 330i 2005-2008 L6-2.5L, 3.0L (EURO Models Only ) (more info)

This is a drop-in stock replacement aFe performance air filter that installs into your BMW's factory airbox. This particular filter fits the following BMWs:

E82 1 series: 125i 130i 2004-2008 Euro Models Only
E90 3 series: 325i 330i 2004-2008 Euro Models Only

This version uses aFe's highest flowing filter media, which uses a lightly oil gauze to filter out dirt and particulates, while allowing more air to flow to the intake. For the best flowing filter, with the best performance gain, we always recommend this standard aFe filter media (often called "Pro5R ", which has a blue pre-oiled filter media). We also carry this filter in the "ProDry" grey filter media, which is oil-free for only slightly less performance and no maintenance.

Part #: 10-10111

Price: $73.95 (USD)

aFe Pro5R Air Filter - E9X 335i, 335xi - E82 135i - E60 535i, 535xi (more info)

Drop-in aFe high performance air that is made for the stock/factory BMW airbox on all the 2007, 2008, 2009 and newer BMW twin-turbo engines, including the E82/E88 1 series 135i, the E90/E92/E93 335i & 335xi, as well as the E60 535i & 535xi filter. This is designed to be the last air filter your BMW needs, as it is completely washable/reusable, and flows better than the stock paper air filters. On your BMW's twin turbo 3.0 liter engine, aspiration a BIG factor in producing power -- the better the airflow, the higher the potential power. Replacing your stock paper filter with an AFE high performance cloth/gauze filter takes only minutes and instantly reduces air restriction, for more horsepower and torque.

This AFE stock-replacement air filter element fits the following BMWs:
2007-2010 E90 3 Series 335i & 335xi sedan
2007-2010 E92 3 Series 335i & 335xi coupe
2010+ E92 3 Series 335is
2007-2010 E93 3 Series 335i convertible
2007-2010 E60 5 Series 535i & 535xi sedan
2008-2010 E82/E88 1 Series 135i coupe & convertible

This version used aFe's highest flowing filter media, which uses a lightly oil gauze to filter out dirt and particulates, while allowing more air to flow to the intake. For the best flowing filter, with the best performance gain, we always recommend this standard aFe filter media (often called "Pro5R ", which has a blue pre-oiled filter media). We also carry this filter in the "ProDry" grey filter media, which is oil-free for only slightly less performance and no maintenance.

Part #: 30-10156

Price: $84.95 (USD)

aFe Pro5R Air Filter - E9X 335i/xi E82 135i with N55 engine - 2011+ (more info)

This is a drop-in stock replacement aFe performance air filter that installs into your BMW's factory airbox. This is designed to be the last air filter your BMW needs, as it is completely washable/reusable, and flows better than the stock paper air filters. On your BMW's N55 turbo 3.0 liter engine, aspiration a BIG factor in producing power -- the better the airflow, the higher the potential power. Replacing your stock paper filter with an AFE high performance cloth/gauze filter takes only minutes and instantly reduces air restriction, for more horsepower and torque.
,br> This version used aFe's highest flowing filter media, which uses a lightly oil gauze to filter out dirt and particulates, while allowing more air to flow to the intake. For the best flowing filter, with the best performance gain, we always recommend this standard aFe filter media (often called "Pro5R ", which has a blue pre-oiled filter media). We also carry this filter in the "ProDry" grey filter media, which is oil-free for only slightly less performance and no maintenance.

This item fits the following BMWs:
2011+ E82 BMW 135i
2011+ E90 BMW 335i 335xi 335i xDrive - Sedan
2011+ E92 BMW 335i 335i xDrive - Coupe
2011+ E93 BMW 335i Convertible

Part #: 30-10205

Price: $84.95 (USD)

aFe ProDry S Air Filter - E9X 335i/xi E82 135i with N55 engine - 2011+ (more info)

Improve your 2011+ N55 equipped 1 series or 3 series series intake air flow by up to 61%, simply by removing the restrictive stock paper air filter element out, and replacing it with a high performance aFe drop-in air filter. Installs in your airbox in only minutes. This version has an oil-free filter media for less maintenance. For the best flowing filter, with the best performance gain, we always recommend the standard aFe "Pro5R " filter (which has a blue pre-oiled filter media), but this oil-free filter flows only slightly less than the blue Pro5R style aFe filter, and requires no re-oiling after cleaning the filter.

This item fits the following BMWs:
2011+ E82 BMW 135i
2011+ E90 BMW 335i 335xi 335i xDrive - Sedan
2011+ E92 BMW 335i 335i xDrive - Coupe
2011+ E93 BMW 335i Convertible

Part #: 31-10205

Price: $84.95 (USD)

aFe ProDry S Air Filter - E82 120i, E90 320i, 2004-2008 L4-2.0L (EURO Models Only ) (more info)

This is a drop-in stock replacement aFe performance air filter that installs into your BMW's factory airbox. This particular filter fits the following BMWs:

E82 1 series: 120i 2004-2008 Euro Models Only
E90 3 series: 320i 2004-2008 Euro Models Only

This version has an oil-free filter media for less maintenance. For the best flowing filter, with the best performance gain, we always recommend the standard aFe "Pro5R " filter (which has a blue pre-oiled filter media), but this oil-free filter flows only slightly less than the blue Pro5R style aFe filter, and requires no re-oiling after cleaning the filter.

Part #: 11-10110

Price: $52.95 (USD)

aFe ProDry S Air Filter - E82 125i, 130i, E90 325i, 330i 2005-2008 L6-2.5L, 3.0L (EURO Models Only ) (more info)

This is a drop-in stock replacement aFe performance air filter that installs into your BMW's factory airbox. This particular filter fits the following BMWs:

E82 1 series: 125i 130i 2004-2008 Euro Models Only
E90 3 series: 325i 330i 2004-2008 Euro Models Only

This version has an oil-free filter media for less maintenance. For the best flowing filter, with the best performance gain, we always recommend the standard aFe "Pro5R " filter (which has a blue pre-oiled filter media), but this oil-free filter flows only slightly less than the blue Pro5R style aFe filter, and requires no re-oiling after cleaning the filter.

Part #: 11-10111

Price: $73.95 (USD)

aFe ProDry S Air Filter - E90/E92 325i 328i 330i (more info)

This is a drop-in stock replacement aFe performance air filter that installs into your BMW's factory airbox. This particular filter fits the following BMWs:

E90 E92 E93 3 series: 325i 325Xi 328i 328Xi 330i 330Xi 2006+

E82 1 Series: 128i 2008+

This version has an oil-free filter media for less maintenance. For the best flowing filter, with the best performance gain, we always recommend the standard aFe "Pro5R " filter (which has a blue pre-oiled filter media), but this oil-free filter flows only slightly less than the blue Pro5R style aFe filter, and requires no re-oiling after cleaning the filter.

Part #: 31-10131

Price: $84.95 (USD)

aFe ProDry S Air Filter - E90/E92/E93 335i E82/E88 135i, E60 535i (more info)

This is a drop-in stock replacement aFe performance air filter that installs into your BMW's factory airbox. This particular filter fits the following BMWs:

E90 E92 E93 3 series: 335i 335xi 2006-2010
E92 E93 3 series: 335is 2010+
E82 1 series: 135i 2008-2010
E60 5 series: 535i 535xi 2007-2010

This version has an oil-free filter media for less maintenance. For the best flowing filter, with the best performance gain, we always recommend the standard aFe "Pro5R " filter (which has a blue pre-oiled filter media), but this oil-free filter flows only slightly less than the blue Pro5R style aFe filter, and requires no re-oiling after cleaning the filter.

Part #: 31-10156

Price: $84.95 (USD)

Intake Kits and Individual Intake Components

Active Autowerke Blow Off Valve Kit - E82 135i, E9x 335i w/ N54 (more info)

Protect you turbo from excess pressure build up.
The Active Autowerke single BOV - Blow Off Valve Kit - sports a huge venturi, designed to handle excess pressure build-up against the turbo compressor impeller blades, which can damage the compressor wheel and shaft. With our valve in place, the stock turbos are protected as the boost is raised – you can safely increase HP and get that cool “whoosh” sound as your BMW spits out excess inlet pressure.

All hardware & fittings have that quality factory look you demand, and are built to perform flawlessly under the most aggressive boost conditions.

Key Features:

High-efficiency single displacement BOV – takes place of two smaller plastic valves

Large opening can handle maximum boost, provide high flow

Proven and tested to handle 600+ HP

All aluminum venturi design with factory-style throttle clamp

CNC machined flange

Durable black powder-coated wrinkle finish

Illustrated instruction manual & installation guide for easy “Plug ‘n Play”

This item fits the following BMWs with N54 engine:
2008-2010 E82 BMW 135i
2006-2010 E90 BMW 335i 335xi 335i xDrive
2007-2010 E92 BMW 335i 335is 335xi 335i xDrive
2010+ E92 BMW 335is
2007-2010 E93 BMW 335i

Part #: AABOVKIT-N54

Price: $595.00 (USD)

CRC Mass Air Flow Sensor Cleaner, 11 Oz Can (more info)

CRC HFM cleaner is specifically developed to clean mass air flow sensors. Increases horsepower & improves air/fuel ratio and MPG. Plastic safe-dries in seconds! Perfect for cars that have had "over-oiled" performance filters installed. Over-oiling can cause the HFM to gum up, this is the perfect solution. This item cannot ship air freight or internationally. UPS Ground shipping to the lower 48 US states only.

Part #: 05110

Price: $11.95 (USD)

Genuine BMW Performance Air Intake Kit - E82 128i, E88 128i - 2008+ (more info)

Upgrading to a E82 128i BMW Performance air intake system will unleash gains of up to 3 horsepower and 3 ft-lbs. of torque for your 1 Series, while also helping the engine to operate more efficiently with a 30% reduction in back pressure and increased overall performance. Kit includes new air box, covers and filter.

This item fits the following BMWs:
2008+ E82 BMW 128i

Part #: 13720444749 (13-72-0-444-749)

Price: $899.95 (USD)

ITG Foam Filter for Eurosport/Conforti Intake Kits (more info)

Replacement ITG Foam Filter for Conforti Intake Kits. Available in 3" and 3.5" opening (see below for applications) or check your filter box for correct appliaction. Filter comes pre-oiled but oil recharge kit is recommended for future maintenance.

Click here for approved cleaning methods for ITG foam filters.

Applications:
3.5" (blue box): all Euro HFM kits (E36 M3, MZ3), E46 330, late E46 325, E39 530, E39 540, Z3 3.0
3.0" (green box): all other models not listed above (E36 M3/MZ3 with stock HFM, E36 325/328, E46 323/328, E39 525/528, Z3 2.3/2.8)

Part #: JC60/73 / JC60/86

Price: $84.95 (USD)

No-Toil Foam Filter Oil (for ITG Filters) (more info)

Don't use harsh solvents like gasoline to clean your ITG on your Eurosport/Conforti intake kit (or similar foam filter element). This product is all you need to maintain your ITG foam filter, and is recommend for use with all Conforti Cold-Air Intake Kits.

When cleaning an ITG foam filter, ITG recommends using warm water and a mild detergent (simple dish soap is fine). Strong detergents and solvents can harm the foam, and cause the filter to break down. Once dirt, dust and debris are rinsed out of the filter, it should be re-oiled to ensure proper function of the filter. ITG recommends No-Toil filter oil, as it is safe to the foam filter media, and is completely waterproof. Drive with more peace of mind through heavy rain and puddles.

Please note, as this product is an aerosol, it MUST BE SHIPPED BY UPS GROUND. Sorry, this can not be shipped outside of the US/Canda.

Part #: NTO-AEROSOL

Price: $10.95 (USD)

Stett Performance Charge Pipe with Dual Diverter Valves - E9x 335i/xi, E82 135i with N54 engine (more info)

The factory plastic charge pipe and diverter valves are prone to leaking under stock boost levels, increasing boost only makes this problem worse. The stock diverter valves are not designed internally to handle added boost pressure. They can fail under load which will actually cause boost bleed off when you don't want it causing boost spikes and loss of horsepower. The STETT Performance 135i/335i charge pipe is made from 100% 304 stainless steel and designed to handle higher than stock boost levels without leaking thanks to it's very strong design, ultra high quality materials and our patent pending throttle body connector that forms an ultra tight seal and prevents the charge pipe from blowing off as is so common with other products on the market. The factory plastic piece begins to leak on even stock level boost. Simply using a standard silicone hose connector to connect an aftermarket pipe leaves a high chance the pipe will blow off the engine. We, however, developed a patent pending 4 ply, double layer hose connector to the throttle body which is far superior to anything else on the market including the factory flimsy o-ring and lock clip. Each kit comes with everything you need for installation including the dual billet aluminum diverter valves from Forge, one of the most respected names in the industry. Each pipe comes standard with dual stainless meth bungs.

Made in the U.S.A.

304 stainless steel replaces factory plastic

Ultra high quality and strong materials

Eliminate leaks caused by weak factory connections

Get back horsepower lost from weak factory diverter valves

Our patent pending hose connector eliminates pipe from blowing off engine under load

Dual stainless Meth bungs

Extreme Duty silicone hoses

High strength stainless hardware

This item fits the following BMWs:
2008-2010 E82 BMW 135i
2011-2012 E82 BMW 1M Coupe
2006-2010 E90 BMW 335i 335xi 335i xDrive - Sedan
2007-2010 E92 BMW 335i 335xi 335i xDrive - Coupe
2007-2010 E93 BMW 335i - Convertible
2011-2012 E92 BMW 335is - Coupe
2011-2012 E93 BMW 335is - Convertible

Part #: SPEE82E92DDV

Price: $595.00 (USD)