 |
| aFe Dynamic Air Scoops (DAS) - E90/E92/E93 M3, 335i & 328i
(more info) |
 Direct more fresh cool air from your BMW's center/nose grills to your intake, with the aFe D.A.S. (Dynamic Air Scoops). These two "scoops" install behind your front grills to direct more airflow into the factory intake snorkel used on the 328i, 328xi, 335i & 335xi, and 2008+ E90/E92 M3. Scoops are a direct bolt-in install, and include installation instructions and required hardware for a simple install. When combined with a higher flowing filter, such as the aFe stock replacement filter or twin filter system (335i & 335xi), these scoops help get the maximum benefit of a higher efficiency filter by providing more cool, fresh outside air directly into the intake snorkel. Both the 3.0 twin turbo models and the 4.0 V8 models especially need this added air flow for best horsepower and torque.
These aFe Intake Scoops fit the following BMWs:
2007-2011 E90/E92/E93 BMW 328i & 328xi (coupe, sedan & convertible)
2007-2010 E90/E92/E93 BMW 335i & 335xi (coupe, sedan & convertible)(N54 engine only)
2008-2011 E90/E92/E93 BMW M3 (coupe, sedan & convertible)
|
| Part #: 54-11478 |
| Price: $109.00 (USD) |
|
|
|
|
|
|
 |
| aFe Elite Stage 2 SI - Intake Kit - E90/92/93 335i 2007-2009
(more info) |
Producing 14 max horsepower and 27 lbs. x ft. torque, this radically different Stage 2 sealed cold air intake system is engineered to let maximum air in while keeping engine heat out. Featuring two uniquely shaped molded intake ducts that replaces the single stock intake tract, this intake system smoothly directs increased air flow from two direction for improved volumetric efficiency and maximum performance. So effective is the design that Intake Air Temperature (IAT) at normal running speeds with this aFe intake system is 11 degrees lower than the factory intake. Complementing the dual intake tract are two Dynamic Air Scoops (D.A.S.) that, when mounted in the front grille, further directs air into the engine. Easily accessible with a satin black powdercoated aluminum cover, an washable/reusable conical air filter is enclosed in a molded plastic housing and mounted on a oval intake tube that smoothly supplies maximum air to the twin turbos. The full effect of this system cannot be felt or tested on stationary dyno and can only be fully appreciated on the wide open highway.
By removing your stock intake air box, you are removing the most restrictive portion of your 335's intake system, increasing both horse power and torque, improving acceleration as well as throttle response.
Note: This intake system comes with Dynamic Air Scoops (D.A.S.) and both a Pro5R oiled filter and a ProDryS non-oiled filter.
For additional information check out the Tech Sheet for this aFe intake kit.
This aFe intake fits the following BMWs:
2007+ E90 3 series: BMW 335i Sedan, 335is Sedan 335Xi Sedan, 335i xDrive Sedan
2007+ E92 3 series: BMW 335i Coupe, 335is Coupe, 335Xi Coupe, 335i xDrive Coupe
2006+ E93 3 series: BMW 335i Convertible, 335is Convertible
|
| Part #: 50-81472 |
| Price: $795.00 (USD) |
|
|
|
|
|
|
 |
| aFe Intake Kit - Pro5R - E82 128i, E90-E92 325i, 328i, 330i
(more info) |
Maxiumum Flow Pro5R Filter
This intake kit replaces your restrictive factory air box. It features a 3-angle velocity stack adapter, 16-gauge powder-coated steel heat shield, trim sealed to seal out hot engine air, and a custom aFe brand cotton filter.
This version uses aFe's highest flowing filter media, which uses a lightly oil gauze to filter out dirt and particulates, while allowing more air to flow to the intake. For the best flowing filter, with the best performance gain, we always recommend this standard aFe filter media (often called "Pro5R ", which has a blue pre-oiled filter media). We also carry this filter in the "ProDry" grey filter media, which is oil-free for only slightly less performance and no maintenance.
By removing your stock intake air box, you are removing the most restrictive portion of your engine's intake system, increasing both horse power and torque, improving acceleration as well as throttle response.
This aFe intake fits the following BMWs:
2008+ E82 BMW 128i
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi - Sedan
2006-2011 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007+ E92 BMW 328i 328xi 328i xDrive - Coupe
2007+ E93 BMW 328i - Convertible
|
| Part #: 54-11012 |
| Price: $355.00 (USD) |
|
|
|
|
|
|
 |
| aFe Intake Kit - Stage 2 Si - E82 128i, E90-E92 325i, 328i, 330i
(more info) |
This Stage 2 Sealed Intake produces 12HP, 15LBS. x FT. of torque and outflows the factory intake by 56%. This sealed air intake system features a washable/reusable 6" conical air filter with inverted top that improves airflow for increased horsepower, torque and throttle response. The air filter is constructed with 100% polyurethane for long life and multiple cleaning cycles.The sealed housing features two auxiliary air inlet ducts for increased airflow. To finish off your underhood appearance, an attractive vacuum formed ABS plastic cover with carbon fiber finish is used to provide easy access to the filter for servicing and an aggressive look. To complete this system, a dyno tuned molded plastic intake tube with velocity stack adapter replaces the stock intake tract and directs air flow with improved volumetric efficiency for maximum intake velocity.
Vacuum Formed ABS Carbon Fiber Finish Cover - This intake is topped with a vacuum formed ABS carbon fiber finish cover that seals out hot intake air and provides an aggressive yet elegant look to your 3-series.
6" Conical Air Filter with Inverted Top - Choose either Pro Dry S performance air filter for maximum convenience or Pro5r oiled filter for maximum flow for increased horsepower and torque.
Fully Sealed Design - aFe engineers have designed a very sophisticated 2-piece sealed intake that keeps out warm underhood air and brings in cooler, outside air for a denser air intake charge.
Mounts In Factory Location - aFe has developed this intake to provide a hassle-free installation that utilizes all factory mounting locations.
This aFe intake fits the following BMWs:
2008+ E82 BMW 128i
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi - Sedan
2006-2011 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007+ E92 BMW 328i 328xi 328i xDrive - Coupe
2007+ E93 BMW 328i - Convertible
|
| Part #: 54-81012-X |
| Price: $529.00 (USD) |
|
|
|
|
|
|
|
 |
| aFe Restore Kit
(more info) |
| aFe's highly refined oil is proven less likely to foul MAF sensors than other oil. It works great with aFe filters and is a great way to upgrade competitive oiled filters. aFe cleaner is specially formulated to release dirt without harming the microfibers critical to efficient filtration. It has a simple three step restoration procedure. Available in either aerosol or squeeze bottle. |
| Part #: 90-50501XX |
Regular Price: $11.45 (USD)
Sale Price: $10.31 (USD) |
|
|
|
|
|
|
|
 |
| aFe Stage 2 Intake Kit - E90/E92/E93 M3 with DAS Scoops
(more info) |
The latest generation M3 V8 engine benefits greatly from improving the intake system. This high-revving 4.0 liter S65 engine is thirsty for more fresh, cool, dense air to assist in combustion. Reduce the power-robbing drag and decrease intake air temperatures on your E90 or E92 M3 intake system by eliminating the stock BMW M3 airbox. This AFE engineered intake system is designed to flow the most air (+85% over stock) with the least amount of restriction, dyno tested to make the best horse power and torque gains, maintain proper air filtration, decrease intake air temperatures, and have a superior fit and finish deserving of living under the hood of this latest generation V8 M3 V8. AFE has scored yet another winning solution with this sophisticated and high tech design. We're also confident you'll enjoy the enhanced intake "growl" this intake gives the M3 from under the hood -- this is performance you can actually hear when get into the accelerator.
+15 hp / +13 ft-lbs
This kit features a CAD designed intake tube system, which is tuned for optimum flow in the space provided. A large 6 inch diameter AFE Pro5R filter is used for optimal air flow and impeccable filtration of even the smallest micron particles. This E9X M3 intake also has a full fabricated 6061 aluminum cover and housing, which is power coated in a matte-black to have a more a more "stealth" (yet race inspired) look. Includes a set of aFe Dynamic Air Scoops - a $179.95 value!
The kit installs easily around 30 to 40 minutes, using standard tools, and is 100% bolt on -- no cutting, no drilling and no modifications. It comes complete with installation instructions (with photos), and is a straight-forward do it yourself install. This kit simply has it all -- performance, sound, appearance, and ease of installation.
This aFe Intake Kit fits the following BMWs:
2008+ E90 BMW M3 sedan
2008+ E92 BMW M3 coupe
2008+ E93 BMW M3 convertible
|
| Part #: 50-11662-BV |
| Price: $995.00 (USD) |
|
|
|
|
|
|
 |
| aFe Stage 2 Intake Kit - 135i, 335i 2011+ w N55 engine
(more info) |
This BMW 335i air intake system removes the restrictive factory air box. aFe claims 17 max horsepower, 23lbs. x ft. torque and out-flowed the factory intake by 44% on the awesome BMW N55 E90, E92, E93 and E82, E88 135i . This system includes a durable 16 gauge, powder-coated heat shield; this air intake system features a washable/reusable conical Pro 5R air filter for maximum flow. This intake system also features a heat-insulating molded plastic tube that replaces the stock intake tract and directs increased air flow with improved volumetric efficiency for maximum performance. The one-piece heat shield requires little or no assembly and the filter is constructed with 100% polyurethane for long life and multiple cleaning cycles.
Choose from Pro5R oiled filter for maximum flow or ProDry S oil-free filter media for maximum convenience.
Pro5R filter uses a lightly oil gauze to filter out dirt and particulates, while allowing more air to flow to the intake. For the best flowing filter, with the best performance gain, we always recommend this standard aFe filter media
ProDry S filter uses an oil-free filter media for less maintenance. This oil-free filter flows only slightly less than the blue Pro5R style aFe filter, and requires no re-oiling after cleaning the filter.
This item fits the following BMWs:
2011+ E82 BMW 135i
2011+ E90 BMW 335i 335xi 335i xDrive
2011+ E92 BMW 335i 335xi 335i xDrive
2011+ E93 BMW 335i
|
| Part #: 54-11912X |
| Price: $449.00 (USD) |
|
|
|
|
|
|
|
 |
| aFe Stage 2 Intake Kit - E82/E88 135i, E90/E92 335i & 335xi, and E60 535i & 535xi - Pro5R
(more info) |
Maxiumum Flow Pro5R Filter
TIncrease horse power and torque in your twin-turbo charged BMW 135i, 335i, 335xi, 535i or 535xi with this twin-filter element aFe cold air intake system. aFe has reported gains of 27hp and 34 ft/lbs of torque with this kit, which increases airflow 98% over the stock airbox. Installs in under an hour!
This BMW 335i air intake system is one of the easiest and most effective ways to increase your BMW's performance. The kit includes all parts and installation instructions to replace the restrictive factory air box with a low-restriction, high-flow filtering system. The kit includes a one-piece precision molded twin intake tube, 16 gauge powder coated steel heat shield, and gasket -- all assisting in blocking out hot engine air for cooler, denser air mass.
This version uses aFe's highest flowing filter media, which uses a lightly oil gauze to filter out dirt and particulates, while allowing more air to flow to the intake. For the best flowing filter, with the best performance gain, we always recommend this standard aFe filter media (often called "Pro5R ", which has a blue pre-oiled filter media). We also carry this filter in the "ProDry" grey filter media, which is oil-free for only slightly less performance and no maintenance.
This aFe Intake Kit fits the following BMWs:
2007-2010 E90 3 Series Sedan BMW 335i & 335xi
2007-2010 E92 3 Series Coupe BMW 335i & 335xi
2010+ E92 3 Series Coupe BMW 335is
2008-2010 E82 1 Series Coupe BMW 135i
2011+ E82 1 Series Coupe BMW 1M Coupe
2008-2010 E88 1 Series Convertible BMW 135i
2007-2010 E60 5 Series BMW 535i & 535xi
|
| Part #: 54-11472 |
| Price: $365.00 (USD) |
|
|
|
|
|
|
 |
| aFe Stage 2 Intake Kit - E90/92/93 325i 328i 330i 2006-2008 - ProDry S
(more info) |
"Oil-Free" ProDry S Filter
This intake kit replaces the top-half of both your factory air boxes. It features two 3-angle aluminum velocity stack adapters, 16-gauge powder-coated steel heat shields, trim sealed to seal out hot engine air, two custom aFe brand cotton filters, all hardware, and installation instructions.
This version has an oil-free filter media for less maintenance. For the best flowing filter, with the best performance gain, we always recommend the standard aFe "Pro5R " filter (which has a blue pre-oiled filter media), but this oil-free filter flows only slightly less than the blue Pro5R style aFe filter, and requires no re-oiling after cleaning the filter.
By removing your stock intake air box, you are removing the most restrictive portion of your engine's intake system, increasing both horse power and torque, improving acceleration as well as throttle response.
This aFe intake fits the following BMWs:
2006+ E90 3 series: 325i Sedan, 328i Sedan, 330i Sedan, 325xi Sedan, 328Xi Sedan. 328i xDrive Sedan, 330xi Sedan
2006+ E92 3 series: 328i Coupe, 328Xi Coupe, 328i xDrive Coupe
2006+ E93 3 series: 328i Convertible
6.5 hp gain (max) at 4900 rpm
7 lb/ft torque (max) at 4900rpm
 Click
here for installation instructions.
|
| Part #: 51-11012 |
| Price: $355.00 (USD) |
|
|
|
|
|
|
 |
| aFe Stage 2 Intake Kit - E90/92/93 335i 2007-2010 - ProDry S
(more info) |
"Oil-Free" ProDry S Filter
This intake kit replaces your restrictive factory air box. It features a 16-gauge powder-coated steel heat shield, heat-resistant molded intake tube, trim sealed to seal out hot engine air, and a custom application-specific aFe brand cotton filter. aFe has reported gains of 27hp and 34 lbs/ft of torque.
This version has an oil-free filter media for less maintenance. For the best flowing filter, with the best performance gain, we always recommend the standard aFe "Pro5R " filter (which has a blue pre-oiled filter media), but this oil-free filter flows only slightly less than the blue Pro5R style aFe filter, and requires no re-oiling after cleaning the filter.
By removing your stock intake air box, you are removing the most restrictive portion of your intake system, increasing both horse power and torque, improving acceleration as well as throttle response.
This aFe intake fits the following BMWs:
2007-2010 E90 3 series: BMW 335i Sedan, 335Xi Sedan, 335i xDrive Sedan
2007-2010 E92 3 series: BMW 335i Coupe, 335Xi Coupe, 335i xDrive Coupe
2010+ E92 3 series: BMW 335is Coupe
2006-2010 E93 3 series: BMW 335i Convertible, 335is Convertible
2010+ E93 3 series: BMW 335is Convertible
|
| Part #: 51-11473 |
| Price: $409.00 (USD) |
|
|
|
|
|
|
 |
| aFe Stage 2 Intake Kit - E90/92/93 335i 2007-2010 - Pro5R
(more info) |
Maxiumum Flow Pro5R Filter
This intake kit replaces your restrictive factory air box. It features 16-gauge powder-coated steel heat shield, trim sealed to seal out hot engine air, and a custom aFe brand cotton filter. aFe has reported gains of 27hp and 34 lbs/ft of torque.
This version uses aFe's highest flowing filter media, which uses a lightly oil gauze to filter out dirt and particulates, while allowing more air to flow to the intake. For the best flowing filter, with the best performance gain, we always recommend this standard aFe filter media (often called "Pro5R ", which has a blue pre-oiled filter media). We also carry this filter in the "ProDry" grey filter media, which is oil-free for only slightly less performance and no maintenance.
By removing your stock intake air box, you are removing the most restrictive portion of your 335's intake system, increasing both horse power and torque, improving acceleration as well as throttle response.
This aFe intake fits the following BMWs:
2007-2010 E90 3 series: BMW 335i Sedan, 335is Sedan 335Xi Sedan, 335i xDrive Sedan
2007-2010 E92 3 series: BMW 335i Coupe, 335is Coupe, 335Xi Coupe, 335i xDrive Coupe
2010+ E92 3 series: BMW 335is Coupe
2006-2010 E93 3 series: BMW 335i Convertible, 335is Convertible
2010+ E93 3 series: BMW 335is Convertible
|
| Part #: 54-11473 |
| Price: $409.00 (USD) |
|
|
|
|
|
|
 |
| aFe Stage 2 Intake Kit - E90/92/93 335i, 2007-2010, E82 135i, E60 535i - ProDry S
(more info) |
"Oil-Free" ProDry S Filter
Increase horse power and torque in your twin-turbo charged BMW 135i, 335i, 335xi, 535i or 535xi with this twin-filter element aFe cold air intake system. aFe has reported gains of 27hp and 34 ft/lbs of torque with this kit, which increases airflow 98% over the stock airbox. Installs in under an hour!
The aFe Intake system is one of the easiest and most effective ways to increase your BMW's performance. The kit includes all parts and installation instructions to replace the restrictive factory air box with a low-restriction, high-flow filtering system. The kit includes a one-piece precision molded twin intake tube, 16 gauge powder coated steel heat shield, and gasket -- all assisting in blocking out hot engine air for cooler, denser air mass.
This aFe Intake Kit fits the following BMWs:
2007-2010 E90 3 Series Sedan - BMW 335i & 335xi
2007-2010 E92 3 Series Coupe - BMW 335i & 335xi
2010+ E92 3 Series Coupe - BMW 335is
2008-2010 E82 1 Series Coupe - BMW 135i
2011+ E82 1 Series Coupe - BMW 1M Coupe
2008-2010 E88 1 Series Convertible - BMW 135i
2007-2010 E60 5 Series - BMW 535i & 535xi
|
| Part #: 51-11472 |
| Price: $365.00 (USD) |
|
|
|
|
|
|
_50-11662B_sm.jpg) |
| aFe Stage 2 Intake Kit - E90/E92/E93 M3 - Replaces Stock Airbox
(more info) |
The latest generation M3 V8 engine benefits greatly from improving the intake system. This high-revving 4.0 liter S65 engine is thirsty for more fresh, cool, dense air to assist in combustion. Reduce the power-robbing drag and decrease intake air temperatures on your E90 or E92 M3 intake system by eliminating the stock BMW M3 airbox. This AFE engineered intake system is designed to flow the most air (+85% over stock) with the least amount of restriction, dyno tested to make the best horse power and torque gains, maintain proper air filtration, decrease intake air temperatures, and have a superior fit and finish deserving of living under the hood of this latest generation V8 M3 V8. AFE has scored yet another winning solution with this sophisticated and high tech design. We're also confident you'll enjoy the enhanced intake "growl" this intake gives the M3 from under the hood -- this is performance you can actually hear when get into the accelerator.
+15 hp / +13 ft-lbs
This kit features a CAD designed intake tube system, which is tuned for optimum flow in the space provided. A large 6 inch diameter AFE Pro5R filter is used for optimal air flow and impeccable filtration of even the smallest micron particles. This E9X M3 intake also has a full fabricated 6061 aluminum cover and housing, which is power coated in a matte-black to have a more a more "stealth" (yet race inspired) look.
The kit installs easily around 30 to 40 minutes, using standard tools, and is 100% bolt on -- no cutting, no drilling and no modifications. It comes complete with installation instructions (with photos), and is a straight-forward do it yourself install. This kit simply has it all -- performance, sound, appearance, and ease of installation.
This aFe Intake Kit fits the following BMWs:
2008+ E90 BMW M3 sedan
2008+ E92 BMW M3 coupe
2008+ E93 BMW M3 convertible
|
| Part #: 50-11662-B |
| Price: $895.00 (USD) |
|
|
|
|
|
|
 |
| aFe Stage 2 Intake Kit - E90/E92/E93 M3 - Retains Stock Airbox
(more info) |
This unique intake system is designed to use the factory intake box to seal the intake tube and filter and tube against unwanted underhood temperatures while increasing air flow and velocity for optimum performance. This air intake system features either a ProDry S or Pro5R air (choose below), a dyno tuned intake tube and all the hardware necessary for an easy installation. This system is truly a silent killer
Choose from Pro5R oiled filter for maximum flow or ProDry S oil-free filter media for maximum convenience.
Pro5R filter uses a lightly oil gauze to filter out dirt and particulates, while allowing more air to flow to the intake. For the best flowing filter, with the best performance gain, we always recommend this standard aFe filter media
ProDry S filter uses an oil-free filter media for less maintenance. This oil-free filter flows only slightly less than the blue Pro5R style aFe filter, and requires no re-oiling after cleaning the filter.
This aFe Intake Kit fits the following BMWs:
2008+ E90 BMW M3 Sedan
2008+ E92 BMW M3 Coupe
2008+ E93 BMW M3 Convertible
|
| Part #: 54-31662 |
| Price: $448.00 (USD) |
|
|
|
|
|
|
|
 |
| aFe Stage 2 SI Intake Kit - 335i 135i, 535i Z435 with N54 engine
(more info) |
Add 14 max horsepower and 27 lbs. x ft. torque to your BMW with the N54 Turbo engine! We offer several aFe Intake Kits for the 135i 335i 535i. The benefit on this system over the less expensive systems is that it is sealed to keep engine heat out while allowing maximum air flow. The molded plastic intake box smoothly directs increased air flow for improved volumetric efficiency and maximum performance. So effective is the design that Intake Air Temperature (IAT) at normal running speeds with this aFe intake system is 11 degrees cooler than the factory intake. Easily accessible with a satin black powder coated aluminum cover, an washable/reusable conical air filter is enclosed in a molded plastic housing and mounted on a oval intake tube that smoothly supplies maximum air to the twin turbos. Click Here for Installation Instructions
Choose from Pro 5 R - oiled filter or ProDry S - dry filter. The Pro 5 R filter is aFe's highest flowing filter media, which uses a lightly oil gauze to filter out dirt and particulates, while allowing more air to flow to the intake. For the best flowing filter, with the best performance gain, we always recommend this standard aFe filter media (often called "Pro5R ", which has a blue pre-oiled filter media). We also carry this filter in the "ProDry S" grey filter media, which is oil-free for only slightly less performance and no maintenance.
This item fits the following BMWs:
2008-2010 E82 BMW 135i
2010+ E82 BMW 1M Coupe
2006-2010 E90 BMW 335i 335xi 335i xDrive
2007-2010 E92 BMW 335i 335is 335xi 335i xDrive
2011 E92 BMW 335is
2007-2010 E93 BMW 335i
2011 E93 BMW 335is
2004-2010 E60 BMW 535i 535xi 535i xDrive
2009-2010 Z4 BMW Z4 sDrive35i Z4 sDrive35is
|
| Part #: 54-8200X |
| Price: $495.00 (USD) |
|
|
|
|
|
|
|
 |
| aFe SuperStock Intake - E90/E92/E93 M3 (Filter, Intake Scoops & Restore Kit) - Pro5R
(more info) |
Maxiumum Flow Pro5R Filter
Increase your V8 M3's intake flow by 54%, for a gain of 8 horsepower and 6 lb/ft of torque to the wheels, by upgrading your E90/E92/E93 M3's stock paper intake filter with an aFe High Performance airfilter and the Dynamic Air Scoops (D.A.S.) which install behind the front grills of your M3 to direct more cool air to the intake. The air scoops are a direct fit for the E9x M3, installs simply and easily using common tools (instruction included), and maintains the stock air box for a "stealth" install. Both the air scoops and the filter work in tandem; The high efficiency aFe air filter reduces restriction through the filter, while the Dynamic Air Scoops direct more of the fresh/cool air coming into the nose grills into the intake. More cool air, less restriction, and more precious power.
This kit includes 1 stock-replacement air filter element, (2) dynamic air scoops (left and right), as well as filter restore kit for cleaning and reconditioning the re-useable filter element (a $12.49 value!).
This aFe Super Stock Filter & Intake Scoop kit fits the following BMWs:
2008-2009 E90 BMW M3 sedan
2008-2009E92 BMW M3 coupe
2008-2009E93 BMW M3 convertible
This version uses aFe's highest flowing filter media, which uses a lightly oil gauze to filter out dirt and particulates, while allowing more air to flow to the intake. For the best flowing filter, with the best performance gain, we always recommend this standard aFe filter media (often called "Pro5R ", which has a blue pre-oiled filter media). We also carry this filter in the "ProDry" grey filter media, which is oil-free for only slightly less performance and no maintenance. |
| Part #: 55-11660 |
| Price: $195.00 (USD) |
|
|
|
|
|
|
|
 |
| aFe SuperStock Intake - E90/E92/E93 M3 (Filter, Intake Scoops & Restore Kit) - Pro5R
(more info) |
Maxiumum Flow Pro5R Filter
Increase your V8 M3's intake flow by 54%, for a gain of 8 horsepower and 6 lb/ft of torque to the wheels, by upgrading your E90/E92/E93 M3's stock paper intake filter with an aFe High Performance airfilter and the Dynamic Air Scoops (D.A.S.) which install behind the front grills of your M3 to direct more cool air to the intake. The air scoops are a direct fit for the E9x M3, installs simply and easily using common tools (instruction included), and maintains the stock air box for a "stealth" install. Both the air scoops and the filter work in tandem; The high efficiency aFe air filter reduces restriction through the filter, while the Dynamic Air Scoops direct more of the fresh/cool air coming into the nose grills into the intake. More cool air, less restriction, and more precious power.
This kit includes 1 stock-replacement air filter element, (2) dynamic air scoops (left and right), as well as filter restore kit for cleaning and reconditioning the re-useable filter element (a $12.49 value!).
This aFe Super Stock Filter & Intake Scoop kit fits the following BMWs:
2010+ E90 BMW M3 sedan
2010+ E92 BMW M3 coupe
2010+ E93 BMW M3 convertible
This version uses aFe's highest flowing filter media, which uses a lightly oil gauze to filter out dirt and particulates, while allowing more air to flow to the intake. For the best flowing filter, with the best performance gain, we always recommend this standard aFe filter media (often called "Pro5R ", which has a blue pre-oiled filter media). We also carry this filter in the "ProDry" grey filter media, which is oil-free for only slightly less performance and no maintenance. |
| Part #: 55-11880 |
| Price: $195.00 (USD) |
|
|
|
|
|
|
 |
| aFe SuperStock Intake -E90/E92/E93 M3 (Filter, Intake Scoops & Restore Kit) - ProDry S
(more info) |
"Oil-Free" ProDry S Filter
Increase your V8 M3's intake flow by 54%, for a gain of 8 horsepower and 6 lb/ft of torque to the wheels, by upgrading your E90/E92/E93 M3's stock paper intake filter with an aFe High Performance airfilter and the Dynamic Air Scoops (D.A.S.) which install behind the front grills of your M3 to direct more cool air to the intake. The air scoops are a direct fit for the E9x M3, installs simply and easily using common tools (instruction included), and maintains the stock air box for a "stealth" install. Both the air scoops and the filter work in tandem; The high efficiency aFe air filter reduces restriction through the filter, while the Dynamic Air Scoops direct more of the fresh/cool air coming into the nose grills into the intake. More cool air, less restriction, and more precious power.
This kit includes 1 stock-replacement air filter element, (2) dynamic air scoops (left and right), as well as filter restore kit for cleaning and reconditioning the re-useable filter element (a $12.49 value!).
This aFe Super Stock Filter & Intake Scoop kit fits the following BMWs:
2010+ E90 BMW M3 sedan
2010+ E92 BMW M3 coupe
2010+ E93 BMW M3 convertible
This version has an oil-free filter media for less maintenance. For the best flowing filter, with the best performance gain, we always recommend the standard aFe "Pro5R " filter (which has a blue pre-oiled filter media), but this oil-free filter flows only slightly less than the blue Pro5R style aFe filter, and requires no re-oiling after cleaning the filter. |
| Part #: 55-11881 |
| Price: $195.00 (USD) |
|
|
|
|
|
|
 |
| aFe Throttle Body Spacer - E9X 335i, E82 135i, E60 535i
(more info) |
Silver Bullet throttle body spacers create turbulence in the air flow at the point just prior entry into the engine increasing horsepower, torque and improving throttle response and fuel efficiency - +6 hp, +3.5 lbs/ft torque. Silver Bullet throttle body spacers are constructed out of durable T-6061 billet aluminum and using a unique serrated/helix entry to create turbulence at the manifold while eliminating the annoying whistle found in other helix only throttle spacers. This throttle body spacer is 50-state legal (CARB E.O Number D-516-2).
Only for cars with N54 engine. Not for cars with N55 engine.
This throttle body spacer fits the following BMWs:
2008-2010 E82 BMW 135i
2010+ E82 BMW 1M Coupe
2006-2010 E90 BMW 335i 335xi 335i xDrive- Sedan
2007-2010 E92 BMW 335i 335is 335xi 335i xDrive - Coupe
2007-2010 E93 BMW 335i - Convertible
2004-2010 E60 BMW 535i 535xi 535i xDrive
|
| Part #: 46-31002 |
| Price: $154.95 (USD) |
|
|
|
|
|
|
|
(E92) 3-Series Coupe 2007 on
aFe Cold-Air Intake Kits
_11-10119_sm.jpg)
