BMW MINI Engine Chips

Shark Injector OBDII Software: 1996-2005 Cars

Battery Charger - 12-Volt 2/10/55 Amp with Engine Start (more info)

If you're planning on using the Shark Injector to add performance engine software to your BMW, a battery charger such as this one is required. We recommend this charger unless your car has the Daytime Running Light feature activated. In that case a charger with a 20amp setting is required. (For more information on performance engine software, click here)

Features:

3 convenient charging modes

2 amp trickle charge mode

10 amp standard charge mode

55 amp engine crank assist mode

fully automatic

on-board circuit breaker protection

LED status indicators

engine cranking assist

UL certified

Part #: BATTERYCH

Price: $89.95 (USD)

Conforti Shark Injector for Mini Cooper S (more info)

The Shark Injector^TM installs through the OBD-II port in your car – no need to remove your ECU and ship it anywhere! Shark Injector^TM software re-maps the fuel and ignition data at part-throttle and wide-open throttle to take advantage of high octane fuel. The Injector was developed by Jim Conforti whose BMW programs are generally regarded as the best performance software that money can buy. The Mini software was developed on the dyno in his development facility to give you more horsepower and torque, quicker and smoother throttle response, a higher rev limit, and removal of the top speed limiter. The Shark Injector^TM is compatible with many different modifications: most supercharger pulleys, cold air intake kit, cat-back exhaust, and others so there is no need to re-tune your car after every modification. This is the easiest software tool available for the Mini Cooper S with only a battery charger required for installation. Among the other benefits is the ability to restore your car back to stock for trips to the dealer. Choose from 91 or 93 minimum octane. Comes with comprehensive installation instructions. Works on all 2002-2006 R53 Cooper S (except automatic transmission)!!

Click here for our FAQ file for the Shark Injector

Please note, performing this software update requires the use of a 10 amp (or greater) battery charger.

Part #: INJ3-MINI

Price: $349.00 (USD)

Turner Motorsport Power Pulley Package Stage I - Mini Cooper S R53 (more info)

Our best selling software/pulley package is finally now in Shark Injector form! We are getting 196-208 horsepower at the engine (160-175 wheel horsepower, depending on intercooler temp) from the TMS power pulley and software kit. Kit includes a new supercharger belt, a set of special BOSCH spark plugs designed for the Mini Cooper S running higher boost, custom TMS/Conforti software loaded in a "do it yourself" Shark Injector unit - no need to send out your ECU! And a two-piece billet aluminum supercharger pulley with stainless steel self-centering insert. The smaller (16%) supercharger pulley increases boost from a stock 10.5 to 14.5 lbs - this increased boost is especially noticeable at lower RPM, making your Mini S even more fun to drive than it is now. We are talking a gain of 30-34HP at the engine (or about 25-30hp at the wheels)! We installed this on our blue and yellow project MINI Cooper S in December 2002, and all we can say is.... "WOW! This car is faster than an E36 M3!" and since then we have put over 58,000 trouble free miles on the car. The Shark Injector for the Mini S increases your rev limit by 200 and removes the top speed limiter. It is also available separately for customers who already have a smaller pulley (works with pulleys that make between 13-15 lbs boost.) Installation of the TMS power pulley takes 3-4 hours - professional installation is required. The Shark Injector - can be installed yourself in less than 15 minutes and is completely reversible if you wish. Click here for dyno chart.

Please note, performing this software update requires the use of a 10 amp (or greater) battery charger.

Part #: MST01-SI

Price: $549.95 (USD)

USB Cable for USB Shark Injector (more info)

This USB cable is compatible with the newer version USB enabled Shark Injectors, which are distinguished by the small USB port located on the face of the device. In the past, when a Shark Injector owner needed an update made to his/her software, it required physically shipping the Shark Injector to Turner Motorsport for us to make the update for you. Advances made in the latest generation "USB" Shark Injector now make it possible for YOU to apply this type of update from your home computer, eliminating the hassle of shipping and waiting for your Shark Injector.

This cable, when combined with any Windows based PC (or Mac running Windows via Bootcamp, VMware, Parallels, etc) and a SOON-TO-BE RELEASED Software Update application allows updates to be applied to the Shark Injector's programming. As periodic updates are released, we'll be able to email you updates to your Conforti Shark Injector, free of charge.

Please note, this cable is NOT required to install the Shark Injector, and is only used when performing updates to your Shark Injector. Should you require updates to your Shark Injector at a later date, you may acquire the cable then -- or you may purchase the cable now to keep with your Shark Injector for future use, if needed (recommended).

Part #: USB

Price: $8.00 (USD)