Current BMW:

(E36/7) Z3 1997-2002 Clear BMW chassis

BMW Z3 Turner Motorsport Wheel Spacers

After years of using spacers on street cars and race cars, we decided it was about time to start from scratch and engineer a spacer with all of the features and tricks that we always wanted. These are the spacers to end all wheel spacers, incorporating not only years of racing ingenuity, but also the experience of our skilled service technicians. Here is why the Turner Motorsport spacers are designed to be the best wheel spacers on the market:

Spacers need to be removed from time to time, and it's not uncommon for them to become stuck to the hub of the car. Nowhere is this more common than the four seasons of New England (where we are located), where rust makes removing anything a nightmare. Most companies tell you to use a hammer and chisel to beat the spacer off. All this does is distort the spacer which, in turn, may lead to a vibration. This latest spacer design incorporates pockets around the entire circumference of the spacer. These pockets allow you to easily pop the spacer off with a flat blade screwdriver without damaging it.
We start with very strong and lightweight high-grade aluminum with a strong resistance to corrosion. We go the extra step and have our spacers coated with a military-spec hard-coat for extreme corrosion prevention and with a dark gray color to blend in with your wheel and brake package for best appearance.
All Turner Spacers are CNC machined to very tight machining tolerances to save weight while not affecting strength. Our spacers are engineered and manufactured to preserve ride quality, last a long time, and enhance your BMW's handling and looks.
We laser engrave each wheel spacer with it's size for fast identification.

Why does every BMW need wheel spacers?

Appearance. This pushes the wheels out wider for a better looking, more aggressive stance and look. Every stock BMW must meet strict German TUV compliance, which mandates extra fender gap. On a stock car with stock wheels, we've found you can use up to a 15mm spacer (that's a lot of space!) For best fit and appearance, we always recommend measuring to find the size that is ideal for your BMW.

Clearance & Correction. Many wheels are not a direct fit with big brake kits or coilover suspensions. A wheel spacer helps by moving the wheel away from the caliper, wheel spokes, or suspension that is causing the clearance issue. If your wheels have the wrong offset (too high an offset, causing the wheels to be too far inward) a set of wheel spacers can correct this by pushing the wheel out to the correct offset.

Handling. By adding wheel spacers, you are widening the overall "track" (or width) of your BMW. A wider track improves cornering, increases stability and safety.

Spacers are purchased based on the size required - click here for tips on how to measure.

Available for the following BMWs: (click icon to change BMW)

BMW 5-lug (except E39) 10mm Wheel Spacers (pair) (more info)
Made in the USA

10MM HUB-CENTRIC WHEEL SPACER (10mm = .39 inch)

5x120 bolt pattern / 72.5mm center bore.
Wheel spacers to fit these BMW models – E24, E28, E30 M3, E31, E32, E34, E36, E38, E46, E60, E63, E82, E83, E87, E90, E91, E92, E93 (E9X), Z3, Z4

A note about 10mm spacers: Any 10mm spacer is considered a custom fitment. The stock hubcentric lip on BMWs can stick out by as much as 11mm. This leaves a gap between the spacer and the hub which seriously compromises safety. We recommend using a larger spacer (12mm and larger do not have this issue) or check that the lip sticks out less than 10mm.

+ hub-centric design, 1-piece spacer with hub-centric lip
+ precise tolerance fitment thanks to CAD process and CNC mill machine
+ aerospace grade aluminum – light weight but very strong with a high resistance to corrosion
+ additional military-spec hardcoat for further corrosion resistance
+ innovative Quick Release pockets for easy removal (better than a chamfered back edge) – a TMS Exclusive!
+ laser engraved size and part number for easy identification
+ stealthy anthracite color
+ optional extended bolt sets in factory-matching black or bright silver finish (wheel stud kits also available)
+ Turner Motorsport track and street tested!

These latest generation of the Turner Motorsport Wheel Spacers represent a total redesign of the wheel spacer “concept”. This is not just a rework of an existing spacer but a ground-up, clean sheet design based on our years of BMW service and motorsports. We took everything we have learned from our service technicians, customers, and race team crew and built the spacer to beat all spacers.

Click here for tips on how to measure for wheel spacers

Part #: TWH9905010

Price: $89.95 (USD)

BMW 5-lug (except E39) 12.5 mm Wheel Spacers (pair) (more info)
Made in the USA

12.5MM HUB-CENTRIC WHEEL SPACER (12.5mm = .50 inch)

5x120 bolt pattern / 72.5mm center bore.
Wheel spacers to fit these BMW models – E24, E28, E30 M3, E31, E32, E34, E36, E38, E46, E60, E63, E82, E83, E87, E90, E91, E92, E93 (E9X), Z3, Z4

+ hub-centric design, 1-piece spacer with hub-centric lip
+ precise tolerance fitment thanks to CAD process and CNC mill machine
+ aerospace grade aluminum – light weight but very strong with a high resistance to corrosion
+ additional military-spec hardcoat for further corrosion resistance
+ innovative Quick Release pockets for easy removal (better than a chamfered back edge) – a TMS Exclusive!
+ engraved size and part number for easy identification
+ stealthy anthracite color
+ optional extended bolt sets in factory-matching black or bright silver finish (wheel stud kits also available)
+ Turner Motorsport track and street tested!

These latest generation of the Turner Motorsport Wheel Spacers represent a total redesign of the wheel spacer “concept”. This is not just a rework of an existing spacer but a ground-up, clean sheet design based on our years of BMW service and motorsports. We took everything we have learned from our service technicians, customers, and race team crew and built the spacer to beat all spacers.

Click here for tips on how to measure for wheel spacers

Part #: TWH9905013

Price: $89.95 (USD)

BMW 5-lug (except E39) 15mm Wheel Spacers (pair) (more info)
Made in the USA

15MM HUB-CENTRIC WHEEL SPACER (15mm = .59 inch)

5x120 bolt pattern / 72.5mm center bore.
Wheel spacers to fit these BMW models – E24, E28, E30 M3, E31, E32, E34, E36, E38, E46, E60, E63, E82, E87, E90, E91, E92, E93 (E9X), Z3, Z4

+ hub-centric design, 1-piece spacer with hub-centric lip
+ precise tolerance fitment thanks to CAD process and CNC mill machine
+ aerospace grade aluminum – light weight but very strong with a high resistance to corrosion
+ additional military-spec hardcoat for further corrosion resistance
+ innovative Quick Release pockets for easy removal (better than a chamfered back edge) – a TMS Exclusive!
+ engraved size and part number for easy identification
+ stealthy anthracite color
+ optional extended bolt sets in factory-matching black or bright silver finish (wheel stud kits also available)
+ Turner Motorsport track and street tested!

These latest generation of the Turner Motorsport Wheel Spacers represent a total redesign of the wheel spacer “concept”. This is not just a rework of an existing spacer but a ground-up, clean sheet design based on our years of BMW service and motorsports. We took everything we have learned from our service technicians, customers, and race team crew and built the spacer to beat all spacers.

Click here for tips on how to measure for wheel spacers

Part #: TWH9905015

Price: $89.95 (USD)

BMW 5-lug (except E39) 17.5 mm Wheel Spacers (pair) (more info)
Made in the USA

17.5MM HUB-CENTRIC WHEEL SPACER (17.5mm = .69 inch). These are also often used in place of 17mm or 18mm wheel spacers.

5x120 bolt pattern / 72.5mm center bore.
Wheel spacers to fit these BMW models – E24, E28, E30 M3, E31, E32, E34, E36, E38, E46, E60, E63, E82, E83, E87, E90, E91, E92, E93 (E9X), Z3, Z4

+ hub-centric design, 1-piece spacer with hub-centric lip
+ precise tolerance fitment thanks to CAD process and CNC mill machine
+ aerospace grade aluminum – light weight but very strong with a high resistance to corrosion
+ additional military-spec hardcoat for further corrosion resistance
+ innovative Quick Release pockets for easy removal (better than a chamfered back edge) – a TMS Exclusive!
+ laser engraved size and part number for easy identification
+ stealthy anthracite color
+ optional extended bolt sets in factory-matching black or bright silver finish (wheel stud kits also available)
+ Turner Motorsport track and street tested!

These latest generation of the Turner Motorsport Wheel Spacers represent a total redesign of the wheel spacer “concept”. This is not just a rework of an existing spacer but a ground-up, clean sheet design based on our years of BMW service and motorsports. We took everything we have learned from our service technicians, customers, and race team crew and built the spacer to beat all spacers.

Click here for tips on how to measure for wheel spacers

Part #: TWH9905018

Price: $97.95 (USD)

BMW 5-lug (except E39) 20mm Wheel Spacers (pair) (more info)
Made in the USA

20MM HUB-CENTRIC WHEEL SPACER (20mm = .79 inch)

5x120 bolt pattern / 72.5mm center bore.
Wheel spacers to fit these BMW models – E24, E28, E30 M3, E31, E32, E34, E36, E38, E46, E60, E63, E82, E87, E90, E91, E92, E93 (E9X), Z3, Z4

+ hub-centric design, 1-piece spacer with hub-centric lip
+ precise tolerance fitment thanks to CAD process and CNC mill machine
+ aerospace grade aluminum – light weight but very strong with a high resistance to corrosion
+ additional military-spec hardcoat for further corrosion resistance
+ innovative Quick Release pockets for easy removal (better than a chamfered back edge) – a TMS Exclusive!
+ laser engraved size and part number for easy identification
+ stealthy anthracite color
+ optional extended bolt sets in factory-matching black or bright silver finish (wheel stud kits also available)
+ Turner Motorsport track and street tested!

These latest generation of the Turner Motorsport Wheel Spacers represent a total redesign of the wheel spacer “concept”. This is not just a rework of an existing spacer but a ground-up, clean sheet design based on our years of BMW service and motorsports. We took everything we have learned from our service technicians, customers, and race team crew and built the spacer to beat all spacers.

Click here for tips on how to measure for wheel spacers

Part #: TWH9905020

Price: $97.95 (USD)

BMW 5-lug (except E39) 5 mm Wheel Spacers (pair) (more info)
Made in the USA

5MM HUB-CENTRIC WHEEL SPACER (5mm = .20 inch)

5x120 bolt pattern / 72.5mm center bore.
Wheel spacers to fit these BMW models – E24, E28, E30 M3, E31, E32, E34, E36, E38, E46, E60, E63, E82, E83, E87, E90, E91, E92, E93 (E9X), Z3, Z4

+ hub-centric design*, 1-piece spacer
+ precise tolerance fitment thanks to CAD process and CNC mill machine
+ aerospace grade aluminum – light weight but very strong with a high resistance to corrosion
+ additional military-spec hardcoat for further corrosion resistance
+ innovative Quick Release pockets for easy removal (better than a chamfered back edge) – a TMS Exclusive!
+ laser engraved size and part number for easy identification
+ stealthy anthracite color
+ optional extended bolt sets in factory-matching black or bright silver finish (wheel stud kits also available)
+ Turner Motorsport track and street tested!

These latest generation of the Turner Motorsport Wheel Spacers represent a total redesign of the wheel spacer “concept”. This is not just a rework of an existing spacer but a ground-up, clean sheet design based on our years of BMW service and motorsports. We took everything we have learned from our service technicians, customers, and race team crew and built the spacer to beat all spacers.

* = a 5mm spacer sits on the existing hub lip but leaves less than 5mm of lip for the wheel to rest on. Therefore, wheels that have a bevel around the center bore will not engage the hub lip and a vibration may result.

Click here for tips on how to measure for wheel spacers

Part #: TWH9905005

Price: $79.95 (USD)

Turner Motorsport 10mm Hubcentric Front Wheel Spacer Kit (more info)
Made in the USA

The TMS Wheel Spacer kit includes 2 Spacers and 2 Hub Extenders. TMS Wheel Spacers are made out of a solid, high magnesium content aluminum alloy, making them very light weight. Having less unsprung and rotational weight is a huge benefit on and off the track. Wheels spacers also widen a cars track width for added stability and looks. Each spacer is hardcoated. These are 5 x 120 hubcentric spacers for a wheel with a 72.5mm centerbore. Longer wheel bolts are required with these spacers.

The TMS hub extenders are made of high-grade, lightweight aircraft aluminum. They will press into a stock 72.5mm (Oustide Diameter.) Hub extenders are used to help keep the wheel centered and are extensions of the stock wheel hub. They are needed if a TMS 8mm or 10mm wheel spacers are used. They will also work with H&R 5mm spacers! Each hub extender is anodized for protection and corrosion resistance. These are for front only and DO NOT FIT E46 Xi, E39 5 series, E90/E92, E82/E88 1 series, or E30 4 lug. These do fit E30 M3.

Hub extenders are also available separately. Click here.

Part #: TWH9905002-K

Price: $149.90 (USD)

Turner Motorsport 7.5mm Hubcentric Front Wheel Spacer Kit (more info)
Made in the USA

The TMS Wheel Spacer kit includes 2 Spacers and 2 Hub Extenders. The spacers are made out of a solid, high magnesium content aluminum alloy, making them very light weight. Having less unsprung and rotational weight is a huge benefit on and off the track. Wheels spacers also widen a cars track width for added stability and looks. Each spacer is hardcoated. These are 5 x 120 hubcentric spacers for a wheel with a 72.5mm centerbore. Longer wheel bolts are required with these spacers.

The TMS hub extenders are made of high-grade, lightweight aircraft aluminum. They will press into a stock 72.5mm (Oustide Diameter.) Hub extenders are used to help keep the wheel centered and are extensions of the stock wheel hub. They are needed if a TMS 7.5mm or 10mm wheel spacers are used. They will also work with Turner Motorsport or H&R 5mm spacers! Each hub extender is anodized for protection and corrosion resistance. These are for the front only and DO NOT FIT E46 Xi, E39 5 series, E90/E92, E82/E88 1 series, or E30 4 lug. These do fit E30 M3.

Hub extenders are also available separately. Click here.

Special consideration needs to be taken since wheels are made differently. Some wheels won't work with the 7.5mm spacer and extender combination because of the 2.5mm extra length of the hub. Please measure your wheel to make sure it can accommodate an extra 2.5mm of hub extending into the centerbore. Click Here for a diagram.

This item fits the following BMWs:
1988-1991 E30 BMW M3
1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 328i 328ci 330i 330ci M3
1982-1988 E28 BMW 524td 528e 533i 535i 535is M5
1989-1995 E34 BMW 525i 530i 535i 540i M5
1982-1989 E24 BMW 633csi 635csi M6
1988-1994 E32 BMW 735i 735il 740i 740il 750il
1995-2001 E38 BMW 740i 740il 750il
1990-1999 E31 BMW 840i 840ci 850i 850ci 850csi
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008 Z4 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe

Part #: TWH9905003-K

Price: $149.90 (USD)

Turner Motorsport Front Hub Extenders (Pair) (more info)
Made in the USA

The TMS hub extenders are made of high-grade, lightweight aircraft aluminum. They will press into a stock 72.5mm (Oustide Diameter.) Hub extenders are used to help keep the wheel centered and are extensions of the stock wheel hub. They are needed if a TMS 7.5mm or 10mm wheel spacers are used. They will also work with H&R 5mm spacers! Each hub extender is anodized for protection and corrosion resistance. These are for the front hubs and DO NOT FIT E46 Xi, E39 5 series, E90/E92, E82/E88 1 series, or E30 4 lug. These do fit E30 M3.

Special consideration needs to be taken since wheels are made differently. Some wheels won't work with the 8mm or 5mm spacer and extender combination because of the 2.5-5mm extra length of the hub. Please measure your wheel to make sure it can accommodate an extra 2.5-5mm of hub extending into the centerbore. Click Here for a diagram.

This item fits the following BMWs:
1988-1991 E30 BMW M3
1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 328i 328ci 330i 330ci M3
1982-1988 E28 BMW 524td 528e 533i 535i 535is M5
1989-1995 E34 BMW 525i 530i 535i 540i M5
1982-1989 E24 BMW 633csi 635csi M6
1988-1994 E32 BMW 735i 735il 740i 740il 750il
1995-2001 E38 BMW 740i 740il 750il
1990-1999 E31 BMW 840i 840ci 850i 850ci 850csi
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008 Z4 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe

Part #: TWH9905001

Price: $59.95 (USD)