 |
Battery Charger - 12-Volt 2/10/55 Amp with Engine Start
(more info)
If you're planning on using the Shark Injector to add performance engine software to your BMW, a battery charger such as this one is required. We recommend this charger unless your car has the Daytime Running Light feature activated. In that case a charger with a 20amp setting is required. (For more information on performance engine software, click here)
Features:
3 convenient charging modes
2 amp trickle charge mode
10 amp standard charge mode
55 amp engine crank assist mode
fully automatic
on-board circuit breaker protection
LED status indicators
engine cranking assist
UL certified
|
| Part #: BATTERYCH |
| Price: $89.95 (USD) |
|
|
|
|
 |
E36 328/528/Z3 Shark Injector Stage 3+ Performance Software (Cams/M50 Manifold)
(more info)
Stage 3+ Performance Software for
E36 328i/is/ic, E39 528i, and Z3 2.8 (M50 Manifold + M3 Cam Kit)
Conforti Shark Injector performance software tuned for the an awesome OBD2 package – M50 manifold, M3 S52 camshafts, and intake. This software makes full use of the benefits of the M50 manifold when used with cams and intake. Without the software, you’re not getting the full effect of these
upgrades in the upper rev range. The stock software – or a regular Shark Injector – is tuned for low-end torque using the stock manifold and cams. It’s like a marathon runner in a 40-yard dash – he’ll put in a good effort but won’t be the quickest! Special attention was paid to the low-end and
mid-range too so that torque was not lost with the M50 manifold.
With this software you will notice more top end power, a broader torque band, and a smoother running engine. The rev limit is raised to 7000 RPM with the top speed limiter removed. Works with 91 or higher octane fuel.
Required:
E36 M3 MZ3 S52 stock camshafts
M50 intake manifold
This programmer works for the 1996-1999 E36 328i, 328is, 328i convertible, 1997-1998 E39 528i, and 1997-1998 Z3 2.8
 Click here for installation instructions.
Click here for our FAQ file for the Shark Injector
Please note, performing this software update requires the use of a 10 amp (or greater) battery charger. If you do not have an adequate charger, we carry one, for your convenience which can be added below.
|
| Part #: N328CAMS |
Regular Price: $369.95 (USD)
On Sale For: $349.00 (USD) |
|
|
|
|
|
 |
E46 M3 Shark Injector (programmed for headers, no cats)
(more info)
RACE VERSION Performance Software for E46 M3
The
Race Shark Injector software has been specifically designed for race cars
running headers and a racing exhaust with no catalytic converters. We have used this software with a number of different headers with great
results! We recommend the factory BMW Euro headers because the fitment and
quality is excellent and they produced a lot of power on our dyno. Using a set
of headers without a catalytic converter will surely cause a Check Engine Light
which will lead to problems during tech inspection and may disqualify you from
the racing series you’re in. The secret to the Shark Injector Race software is
that it 'turns down' the readings from the rear O2 sensors to eliminate codes for 'cat-inefficiency'. The DME will then rely on the front pair of O2 sensors and the stock EGT
sensor only.
This
Shark Injector also includes Conforti Performance Software for a substantial
boost in power and torque! The stock software is a little restrained and
Conforti reengineers it to be more aggressive. He tunes his products on the dyno where real power and torque gains can
be established. This software also includes:
- 8100 RPM rev limit (8600 RPM available)
- top speed governor removed
- quicker throttle response in non-Sport and Sport Mode
- smoother torque curve for better driveability
- standard 91 octane (N4S54KAT) setting or a more aggressive 93 octane (N4S54KAO) version
Note:
this product is intended for racing or off-road type vehicles only. Turner
Motorsport makes no claims or warranty in using this product for street use or
to pass inspection (emissions, state, or otherwise). It is the responsibility of
the vehicle owner to ensure compliance with all local, state, and federal
regulations. This product will only be sold with a signed ‘Smog Waiver’, available
here (click for pdf file).
|
| Part #: N4S54KXX |
Regular Price: $369.95 (USD)
On Sale For: $349.00 (USD) |
|
|
|
|
|
 |
MZ3 (S52) Conforti Shark Injector Engine Software - 1998-2000 M Roadster & Coupe
(more info)
Performance Software System for
M Roadster, M Coupe, MZ3 1998-2000
The Shark Injector is an amazing hand-held unit that re-flashes your car with performance software. What really sets this software apart is how easy and effective it is without any further modifications. This software tool re-flashes the stock BMW computer through your car’s diagnostic port and was developed by renowned BMW tuner Jim Conforti, who has nearly 20 years of BMW engine tuning experience. The Shark Injector is one of the safest and most cost-effective enhancements you can
do – offering features and results that other upgrades simply cannot touch. The Shark Injector is also upgrade-able through its own USB port, allowing you to upgrade to different software as your needs and modifications change.
This software is a major refinement of the stock software. It makes the car much easier to drive with less hesitation, more torque, and incredibly smooth operation. A lot of tuning has been done at the low RPM ranges to improve response. The car won’t hesitate or lag, making the car easier to drive. And
with the extra torque you can drive in a higher gear and not have to downshift as often. Theoretically this means better fuel mileage too!
1998-2000 MZ3 Performance Software Peak Power Gains
Features:
- Dyno developed and tuned
- 1-touch operation
- LED lights guide you through installation
- Plug-in to your car's diagnostic port - removal of the computer is not necessary
- USB connection for downloading updates, new files
- Works with 91-95 octane fuel
- Re-install stock software at any time; switch between stock and performance software
Benefits:
- Unlock torque and horsepower
- Smoother engine with less hesitation
- Improved throttle response
- Rev limit increased to 7000
- Top speed limiter removed
- Installs in minutes!
Read what other people are saying:
Z-Thrizzle: "The car just feels right after the injector. The car felt good having CAI, M50 [manifold,] and exahaust. Though after installing the shark injecter it was a lot smoother as though it was the last piece of the puzzle."
SunzOut: "Reduced cold Stumble, better mid/low range pickup."
M Roady: "Best performance mod I ever made on my S52. Worth more than all other mods combined. It certainly made a huge difference in the mid-range butt dyno tests."
S52coupe: "Like the others stated above, the car feels like it's much smoother, easier to drive, and you can tell a difference in the way the motor idles as soon as you turn it over. I was very happy with my purchase.."
Please note, performing this software update requires the use of a 10 amp (or greater) battery charger. If you do not have an adequate charger, we carry one, for your convenience which can be added below. Click here for installation instructions.
Click here for our FAQ file for the Shark Injector
This programmer works for 1998, 1999, 2000 M Roadsters and M Coupes (S52 engine).
|
| Part #: MZ3-S52-PERFORMANCE-SOFTWARE |
Regular Price: $369.95 (USD)
On Sale For: $349.00 (USD) |
|
|
|
|
|
|
MZ3 (S54) Conforti Shark Injector Engine Software - 2001-2002 M Roadster & Coupe
(more info)
Performance Software for M Roadster & Coupe 2001-2002 (S54)
Stock: 253.2 rear wheel Horsepower, 223.1 rear wheel Torque
Sharked: 266.1 rear wheel Horsepower, 229.8 rear wheel Torque
Peak Gain 12.9 HP and 6.7 Torque @ the wheels.
A Max gain of 14.0 lb/ft rear wheel torque @ 4340 rpm
This software is customizable, too!
- choose between 91 and 93 octane
- Top Speed Limiter Removed
- your choice of a stock rev limit or a raised rev limit to 8100 rpm
- throttle response improved in both Sport and non-Sport modes
- choice of several options to make driving your MZ3 more enjoyable (and easier):
DSC button controls Sport mode. With this feature you can control how the DSC and Sport mode interact. By pressing the DSC button and turning the system off you will automatically engage Sport mode. And by turning DSC back on, the Sport mode will disengage. You'll only have to push one button to engage Sport mode! No messy installation or splicing into wires to get the Sport mode feature! Just press a button and go! Available with 8100 rpm rev limit only.
Standard Performance Software. The car's Sport and DSC functions remain the same as stock but all of the other Shark Injector benefits (more
horsepower and torque, smoother engine, quicker throttle response) are
added. Choose from stock rev limit or a raised 8100 rpm rev limit. Choose your minimum octane requirement (91 or 93).
Conforti's Comment: "This software seriously changes the character of the MZ3/M Coupe for the better. It was calibrated over a LONG period on my personal vehicle."
Read what other people are saying:
LAWLence: "Go with the Conforti software. It will use a throttle position map similar to the sport mode, but the throttle response is linear and instant like it should've been from the factory. The throttle is mapped exactly like the stock sport mode, but power delivery is MUCH smoother and linear."
930LDR: "I am quite pleased with the upgrade. Very noticable pick up in throttle response. Can feel a little pick up in power as you move the the RPM range as well. Well worth $300."
fmcfad01: "The Injector will give you much improved throttle response...i recommend it."
clintjg: "The shark is worth it. I explored every NA bolt on available for the S54 and the shark plus headers was the biggest bang for the HP buck."
atan888: "Just installed mine today and boy it made my S54 feel like a real S54. What a difference in response and you can really feel the extra HP. With my mod list growing in my sig its the best bang for the buck mod I ever got for my coupe."
Click here for installation instructions.
|
|
Click here for our FAQ file for the Shark Injector |
|
M Roadster/Coupe
dyno chart |
Please note, performing this software update requires the use of a 10 amp (or greater) battery charger. If you do not have an adequate charger, we carry one, for your convenience which can be added below.
|
| Part #: MZ3-S54-PERFORMANCE-SOFTWARE |
Regular Price: $369.95 (USD)
On Sale For: $349.00 (USD) |
|
|
|
|
|
|
Shark Injector Stage 2 Performance Software for E36 M3 (HFM Kit)
(more info)
Stage 2 Performance Software for
E36 M3, MZ3 (Turner-Porsche 3.5" HFM, 24lb injectors)
Conforti Shark Injector performance software tuned for the Stage 2 OBD2 package – 24lb injectors, Porsche "809" 3.5” HFM, and intake. This is the correct software to use with the desireable Porsche HFM on the OBD2 E36 M3. You should not be running a larger HFM without software and injectors - you're in danger of running too lean! On the dyno we found that the stock fuel injectors were not capable of providing enough fuel to keep up with the increased airflow. This "leaner" fuel mixture was dangerous as it could lead to hotter combustion temps and burning or melting of critical components. With the correct HFM, larger 24lb injectors, and this software you will be back to running correct air-fuel ratios.
The rev limit is raised to 7000 RPM with the top speed limiter removed. Works with 91 or higher octane fuel.
Required:
24lb injectors
Porsche 809 3.5" HFM (0 280 217 809) (TMS/Porsche HFM works best) with intake. Note: this will not work with any other HFM. Euro HFM, 540 HFM, Dinan HFM, and Porsche 803 HFMs are not the same. Our software is programmed and written specifically for the Porsche 809 HFM!
This programmer works for the 1996, 1997, 1998, 1999 E36 M3 3.2 (manual transmission only) and 1998,
1999, 2000 M Roadster, M Coupe
Click here for installation instructions.
Click here for our FAQ file for the Shark Injector
Please note, performing this software update requires the use of a 10 amp (or greater) battery charger. If you do not have an adequate charger, we carry one, for your convenience which can be added below.
|
| Part #: N3TKIT |
| Price: $449.00 (USD) |
|
|
|
|
|
|
Shark Injector Stage 3 Performance Software for E36 M3 (HFM/Cam Kit)
(more info)
Stage 3 Performance Software for
E36 M3, MZ3 (HFM/Cam Kit) (stock S52 manifold)
Conforti Shark Injector performance software tuned for the an awesome OBD2 package – Schrick camshafts, 24lb injectors, Porsche "809" 3.5” HFM, and intake. This software is tuned around the stock S52 intake manifold. For keeping the most useable torque we recommend using the stock manifold over the M50 part.
With this software, and the rest of the Stage 3 components, you will notice more top end power, a broader torque band, and a smoother running engine. The rev limit is raised to 7000 RPM with the top speed limiter removed. Works with 91 or higher octane fuel.
Required:
3.5" HFM (TMS/Porsche HFM works best) with intake
24lb injectors
Schrick camshafts
This programmer works for the 1996, 1997, 1998, 1999 E36 M3 3.2 (manual transmission only) and 1998,
1999, 2000 M Roadster, M Coupe
Click here for installation instructions.
Click here for our FAQ file for the Shark Injector
Please note, performing this software update requires the use of a 10 amp (or greater) battery charger. If you do not have an adequate charger, we carry one, for your convenience which can be added below.
|
| Part #: N3TCAM |
Regular Price: $469.95 (USD)
On Sale For: $449.00 (USD) |
|
|
|
|
|
|
Shark Injector Stage 3+ Performance Software for E36 M3 (HFM/Cam Kit with M50 Manifold)
(more info)
Stage 3+ Performance Software for
E36 M3, MZ3 (M50 Manifold + Cam Kit)
Conforti Shark Injector performance software tuned for the an awesome OBD2 package – M50 manifold, Schrick camshafts, 24lb injectors, Porsche "809" 3.5” HFM, and intake. This software makes full use of the benefits of the M50 manifold when used with cams and the HFM/intake. Without the software, you’re not getting the full effect of these
upgrades in the upper rev range. The stock software – or a regular Shark Injector – is tuned for low-end torque using the stock manifold and cams. It’s like a marathon runner in a 40-yard dash – he’ll put in a good effort but won’t be the quickest! Special attention was paid to the low-end and
mid-range too so that torque was not lost with the M50 manifold.
With this software you will notice more top end power, a broader torque band, and a smoother running engine. The rev limit is raised to 7000 RPM with the top speed limiter removed. Works with 91 or higher octane fuel.
Required:
3.5" HFM (TMS/Porsche HFM works best) with intake
24lb injectors
Schrick camshafts
M50 intake manifold
This programmer works for the 1996, 1997, 1998, 1999 E36 M3 3.2 (manual transmission only) and 1998,
1999, 2000 M Roadster, M Coupe
Click here for installation instructions.
Click here for our FAQ file for the Shark Injector
Please note, performing this software update requires the use of a 10 amp (or greater) battery charger. If you do not have an adequate charger, we carry one, for your convenience which can be added below.
|
| Part #: I3M3CAMS |
Regular Price: $369.95 (USD)
On Sale For: $349.00 (USD) |
|
|
|
|
|
|
Shark Injector Stage 4 Performance Software for E36 M3 (HFM/Cam/Header Kit)
(more info)
Stage 4 Performance Software for
E36 M3, MZ3 (HFM/Cam/Header Kit) (stock S52 manifold)
Conforti Shark Injector performance software tuned for the an awesome OBD2 package – Headers, Schrick camshafts, 24lb injectors, Porsche "809" 3.5” HFM, and intake. This software is tuned around the stock S52 intake manifold. For keeping the most useable torque we recommend using the stock manifold over the M50 part.
With this software, and the rest of the Stage 3 components, you will notice more top end power, a broader torque band, and a smoother running engine. The rev limit is raised to 7000 RPM with the top speed limiter removed. Works with 91 or higher octane fuel.
Required:
3.5" HFM (TMS/Porsche HFM works best) with intake
24lb injectors
Schrick camshafts
Headers (TMS Shorty or other)
This programmer works for the 1996, 1997, 1998, 1999 E36 M3 3.2 (manual transmission only) and 1998,
1999, 2000 M Roadster, M Coupe
Click here for installation instructions.
Click here for our FAQ file for the Shark Injector
Please note, performing this software update requires the use of a 10 amp (or greater) battery charger. If you do not have an adequate charger, we carry one, for your convenience which can be added below.
|
| Part #: N3THDR |
Regular Price: $469.95 (USD)
On Sale For: $449.00 (USD) |
|
|
|
|
|
|
Shark Injector Stage 4+ Performance Software for E36 M3 With M50 Manifold/Cam/Header Kit
(more info)
Stage 4+ Performance Software for
E36 M3, MZ3 (M50 Manifold + Cams + Headers Kit)
Conforti Shark Injector performance software tuned for the an awesome OBD2 package – M50 manifold, Schrick camshafts, performance headers, 24lb injectors, Porsche "809" 3.5” HFM, and intake. This software makes full use of the benefits of the M50 manifold when used with cams and the HFM/intake. Without the software, you’re not getting the full effect of these
upgrades in the upper rev range. The stock software – or a regular Shark Injector – is tuned for low-end torque using the stock manifold and cams. It’s like a marathon runner in a 40-yard dash – he’ll put in a good effort but won’t be the quickest! Special attention was paid to the low-end and
mid-range too so that torque was not lost with the M50 manifold.
With this software you will notice more top end power, a broader torque band, and a smoother running engine. The rev limit is raised to 7000 RPM with the top speed limiter removed. Works with 91 or higher octane fuel.
Required:
3.5" HFM (TMS/Porsche HFM works best) with intake
24lb injectors
Schrick camshafts
performance headers (TMS Shorty or similar)
M50 intake manifold
This programmer works for the 1996, 1997, 1998, 1999 E36 M3 3.2 (manual transmission only) and 1998,
1999, 2000 M Roadster, M Coupe
Click here for installation instructions.
Click here for our FAQ file for the Shark Injector
Please note, performing this software update requires the use of a 10 amp (or greater) battery charger. If you do not have an adequate charger, we carry one, for your convenience which can be added below.
|
| Part #: N3M3CRH |
Regular Price: $399.95 (USD)
On Sale For: $349.00 (USD) |
|
|
|
|
|
Shark Injector Stage 5 Performance Software for E36 M3 (HFM/Cam Kit With No Cats)
(more info)
Stage 5 Performance Software for
E36 M3, MZ3 (HFM/injectors/cams/headers/no cats)
Conforti Shark Injector performance software tuned for the highest level of our OBD2 kits - Schrick camshafts, 24lb injectors, Porsche "809" 3.5” HFM, intake, headers, and race exhaust (no cats). This software is tuned around the stock S52 manifold but will work with an M50 manifold as well. This software turns down the sensitivity of the post-cat oxygen sensors so that fault codes and check engine lights for no cats will not appear. This is the full-bore Kit - tuned for every bolt-on upgrade we sell.
With this software you will notice more top end power, a broader torque band, and a smoother running engine. The rev limit is raised to 7000 RPM with the top speed limiter removed. Works with 91 or higher octane fuel.
Optional Speed Sensor Delete - Since this software is intended for race or track use only, there is one additional feature we can build into the programming. The Speed Sensor is built into the diff cover - an area prone to excessive heat. During endurance races or very hot track days, the sensor can malfunction or actually melt. If the engine DME does not see this signal, it will restrict RPM to 5500, obviously killing your speed! This optional Speed Sensor delete programming will tell the DME not to care if the sensor is sending a signal or not. It will set the maximum RPM to 7000 RPM electronically.
Required:
3.5" HFM (TMS/Porsche HFM works best) with intake
24lb injectors
Schrick camshafts
Headers (TMS Shorty Headers or similar)
No cats (such as the AA Track Pipe)
This programmer works for the 1996, 1997, 1998, 1999 E36 M3 3.2 (manual transmission only) and 1998,
1999, 2000 M Roadster, M Coupe
As this software modifies the emissions sytem on your car, a Smog/Emissions Waiver is required before we can ship this to you. Click
here to download the Smog Waiver (.pdf file).
Click here for installation instructions.
Click here for our FAQ file for the Shark Injector
Please note, performing this software update requires the use of a 10 amp (or greater) battery charger. If you do not have an adequate charger, we carry one, for your convenience which can be added below.
|
| Part #: N3TKAT |
| Price: $449.00 (USD) |
|
|
|
|
|
 |
USB Cable for USB Shark Injector
(more info)
This USB cable is compatible with the newer version USB enabled Shark Injectors, which are distinguished by the small USB port located on the face of the device. In the past, when a Shark Injector owner needed an update made to his/her software, it required physically shipping the Shark Injector to Turner Motorsport for us to make the update for you. Advances made in the latest generation "USB" Shark Injector now make it possible for YOU to apply this type of update from your home computer, eliminating the hassle of shipping and waiting for your Shark Injector.
This cable, when combined with any Windows based PC (or Mac running Windows via Bootcamp, VMware, Parallels, etc) and a SOON-TO-BE RELEASED Software Update application allows updates to be applied to the Shark Injector's programming. As periodic updates are released, we'll be able to email you updates to your Conforti Shark Injector, free of charge.
Please note, this cable is NOT required to install the Shark Injector, and is only used when performing updates to your Shark Injector. Should you require updates to your Shark Injector at a later date, you may acquire the cable then -- or you may purchase the cable now to keep with your Shark Injector for future use, if needed (recommended). |
| Part #: USB |
| Price: $8.00 (USD) |
|
|
|
|
|
Z3 2.3 Conforti Shark Injector Engine Software - 1999-2000 Z3 2.3
(more info)
Performance Software System for
Z3 2.3 M52tu 1999-2000
The Shark Injector is an amazing hand-held unit that re-flashes your car with performance software. What really sets this software apart is how easy and effective it is without any further modifications. This software tool re-flashes the stock BMW computer through your car’s diagnostic port and was developed by renowned BMW tuner Jim Conforti, who has nearly 20 years of BMW engine tuning experience. The Shark Injector is one of the safest and most cost-effective enhancements you can
do – offering features and results that other upgrades simply cannot touch. The Shark Injector is also upgrade-able through its own USB port, allowing you to upgrade to different software as your needs and modifications change.
This software is a major refinement of the stock software. It makes the car much easier to drive with less hesitation, more torque, and incredibly smooth operation. A lot of tuning has been done at the low RPM ranges to improve response. The car won’t hesitate or lag, making the car easier to drive. And
with the extra torque you can drive in a higher gear and not have to downshift as often. Theoretically this means better fuel mileage too!
1999-2000 Z3 2.3 Performance Software Peak Power Gains
Features:
- Dyno developed and tuned
- 1-touch operation
- LED lights guide you through installation
- Plug-in to your car's diagnostic port - removal of the computer is not necessary
- USB connection for downloading updates, new files
- Works with 91-95 octane fuel
- Re-install stock software at any time; switch between stock and performance software
Benefits:
- Unlock torque and horsepower
- Smoother engine with less hesitation
- Improved throttle response
- Rev limit increased to 7000
- Top speed limiter removed
- Installs in minutes!
Please note, performing this software update requires the use of a 10 amp (or greater) battery charger. If you do not have an adequate charger, we carry one, for your convenience which can be added below. Click here for installation instructions.
Click here for our FAQ file for the Shark Injector
This programmer works for 1999 and 2000 Z3 2.3 liter (M52tu engine) roadsters and coupes.
|
| Part #: Z3-2.3-PERFORMANCE-SOFTWARE |
Regular Price: $369.95 (USD)
On Sale For: $349.00 (USD) |
|
|
|
|
|
|
Z3 2.5 Conforti Shark Injector Engine Software - 2001-2003 Z3 2.5
(more info)
Performance Software System for
Z3 2.5 M54 2001-2002
The Shark Injector is an amazing hand-held unit that plugs into your car’s diagnostic port and re-flashes the computer with performance software. The software was developed by renowned BMW tuner Jim Conforti, who has nearly 20 years of BMW engine tuning experience. The Shark Injector is one of the safest and most cost-effective enhancements you can
do – offering features and results that other upgrades simply cannot touch. The Shark Injector is also upgrade-able through its own USB port, allowing you to upgrade to different software as your needs and modifications change.
This software is a major refinement of the stock software. It makes the car much easier to drive with less hesitation, more torque, and incredibly smooth operation. A lot of tuning has been done at the low RPM ranges to improve response. The car won’t hesitate or lag, making the car easier to drive. And
with the extra torque you can drive in a higher gear and not have to downshift as often. Theoretically this means better fuel mileage too!
2001-2002 Z3 2.5 Performance Software Peak Power Gains
Features:
- Dyno developed and tuned
- 1-touch operation
- LED lights guide you through installation
- Plug-in to your car's diagnostic port - removal of the computer is not necessary
- USB connection for downloading updates, new files
- Works with 91-95 octane fuel
- Re-install stock software at any time; switch between stock and performance software
Benefits:
- Unlock torque and horsepower
- Smoother engine with less hesitation
- Improved throttle response
- Rev limit increased to 7000
- Top speed limiter removed
- Installs in minutes!
Read what other people are saying:
MinnMark: "To me it changed in overall responsiveness, feel at the low end of the revs, and just an... aggressiveness to the engine that wasn't there previously. I would not go back to the factory settings!"
whereyat: "I had the Shark Injector upgrade done. It has been great. Last year I installed the Cold Air Intake And can remember noticing a definite differance in the performance. To sum it up I have never regreted spending the bucks on the upgrade. I feel it was well worth it."
Daredevilmo3: "It was definitely a noticeable change. A great upgrade for its price."
Please note, performing this software update requires the use of a 10 amp (or greater) battery charger. If you do not have an adequate charger, we carry one, for your convenience which can be added below. Click here for installation instructions.
Click here for our FAQ file for the Shark Injector
This programmer works for 2001 and 2002 Z3 2.5 liter (M54 engine) roadsters and coupes.
|
| Part #: Z3-2.5-PERFORMANCE-SOFTWARE |
Regular Price: $369.95 (USD)
On Sale For: $349.00 (USD) |
|
|
|
|
|
|
Z3 2.8 Conforti Shark Injector Engine Software - 1998-2000 Z3 2.8
(more info)
Performance Software System for
Z3 2.8 M52 and M52tu 1997-2000
The Shark Injector is an amazing hand-held unit that plugs into your car’s diagnostic port and re-flashes the computer with performance software. The software was developed by renowned BMW tuner Jim Conforti, who has nearly 20 years of BMW engine tuning experience. The Shark Injector is one of the safest and most cost-effective enhancements you can
do – offering features and results that other upgrades simply cannot touch. The Shark Injector is also upgrade-able through its own USB port, allowing you to upgrade to different software as your needs and modifications change.
This software is a major refinement of the stock software. It makes the car much easier to drive with less hesitation, more torque, and incredibly smooth operation. A lot of tuning has been done at the low RPM ranges to improve response. The car won’t hesitate or lag, making the car easier to drive. And
with the extra torque you can drive in a higher gear and not have to downshift as often. Theoretically this means better fuel mileage too!
1997-1998 Z3 2.8 (M52 engine) Performance Software Peak Gains
| HP Gain |
|
+ 15 @ 6400 RPM |
| Torque Gain |
|
+ 9 @ 4500 RPM |
| New Rev Limit |
|
7000 RPM |
1999-2000 Z3 2.8 (M52tu engine) Performance Software Peak Gains
Features:
- Dyno developed and tuned
- 1-touch operation
- LED lights guide you through installation
- Plug-in to your car's diagnostic port - removal of the computer is not necessary
- USB connection for downloading updates, new files
- Works with 91-95 octane fuel
- Re-install stock software at any time; switch between stock and performance software
Benefits:
- Unlock torque and horsepower
- Smoother engine with less hesitation
- Improved throttle response
- Rev limit increased to 7000
- Top speed limiter removed
- Installs in minutes!
Read what other people are saying:
skyblue1: "Just spoke with a local BMW mech and he agrees that the shark injecor software is the way to go."
Please note, performing this software update requires the use of a 10 amp (or greater) battery charger. If you do not have an adequate charger, we carry one, for your convenience which can be added below. Click here for installation instructions.
Click here for our FAQ file for the Shark Injector
These programmers work for 1997-1998 Z3 2.8 (M52 engine) and 1999-2000 Z3 2.8 liter (M52tu engine) roadsters and coupes.
|
| Part #: Z3-2.8-PERFORMANCE-SOFTWARE |
Regular Price: $369.95 (USD)
On Sale For: $349.00 (USD) |
|
|
|
|
|
|
Z3 3.0 Conforti Shark Injector Engine Software - 2001-2003 Z3 3.0
(more info)
Performance Software System for
Z3 3.0 M54 2001-2002
The Shark Injector is an amazing hand-held unit that re-flashes your car with performance software. What really sets this software apart is how easy and effective it is without any further modifications. This software tool re-flashes the stock BMW computer through your car’s diagnostic port and was developed by renowned BMW tuner Jim Conforti, who has nearly 20 years of BMW engine tuning experience. The Shark Injector is one of the safest and most cost-effective enhancements you can
do – offering features and results that other upgrades simply cannot touch. The Shark Injector is also upgrade-able through its own USB port, allowing you to upgrade to different software as your needs and modifications change.
This software is a major refinement of the stock software. It makes the car much easier to drive with less hesitation, more torque, and incredibly smooth operation. A lot of tuning has been done at the low RPM ranges to improve response. The car won’t hesitate or lag, making the car easier to drive. And
with the extra torque you can drive in a higher gear and not have to downshift as often. Theoretically this means better fuel mileage too!
2001-2002 Z3 3.0 Performance Software Peak Power Gains
Features:
- Dyno developed and tuned
- 1-touch operation
- LED lights guide you through installation
- Plug-in to your car's diagnostic port - removal of the computer is not necessary
- USB connection for downloading updates, new files
- Works with 91-95 octane fuel
- Re-install stock software at any time; switch between stock and performance software
Benefits:
- Unlock torque and horsepower
- Smoother engine with less hesitation
- Improved throttle response
- Rev limit increased to 7000
- Top speed limiter removed
- Installs in minutes!
Read what other people are saying:
kniffin50: "Best thing I did to my 2001 3.0. I like the smooth take offs and the new power bands."
z3RIFFRAFF: "I have a 2002 3.0 that I sharked without any problems. The only thing you will regret is waiting so long to do it!"
bigbird: "I installed my Conforti Shark injector yesterday. My impression after about 30 miles of driving is that the throttle response is quicker. I also like that the rev limiter no longer interferes with a quick row through the lower gears. It seems to idle a little higher, too. The overall feeling is of more and quicker "punch" when you nail the throttle. It's not a night-and-day kind of a difference, but most definitely noticeable. My wife drove the car about 50 miles and she said that it shifts smoother, is more responsive and even feels a little faster. One more thing; the install was painless and the directions were very good."
Please note, performing this software update requires the use of a 10 amp (or greater) battery charger. If you do not have an adequate charger, we carry one, for your convenience which can be added below. Click here for installation instructions.
Click here for our FAQ file for the Shark Injector
This programmer works for 2001 and 2002 Z3 3.0 liter roadsters and coupes.
|
| Part #: Z3-3.0-PERFORMANCE-SOFTWARE |
Regular Price: $369.95 (USD)
On Sale For: $349.00 (USD) |
|
|
|
|
|
Shark Injector OBDII Software: 1996-2005 Cars
