 |
3-series Strut/Shock Mount Kit - E36, Z3 (not M models)
(more info)
The E36 3 Series Strut/Shock Mount Kit includes two OEM front strut tower mounts with bearings, two front
strut reinforcement plates, two
rear shock tower reinforcement plates, ten M8 13mm head Nyloc nuts, a pair of rear shock tower mount gaskets and your choice of three different rear shock mounts.
You can choose from the HD
OEM Rear Mounts, the "Repair
Shop" Lifetime Warranty Mounts, or the High
Performance Aluminum & Rubber Mounts. Any of these mounts are suitable for street use, we recommend the Performance Aluminum & Rubber Mounts for coil-over suspensions or for cars that see a lot of track use.
When you replace spring or shocks & struts in your car, these mounts must be removed and reinstalled anyway. Do it at the same time you replace shocks to save yourself the the increased labor time if they go bad soon after shock/strut
install.
Choose your product options below.
This item fits the following BMWs:
7/1992-1998 E36 BMW 318i 318is 318ti 323is 325i 325is 328i 328is M3 - not for convertibles
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Roadster
|
| Part #: E36MOUNTKIT |
| Price: $187.15 (USD) |
|
|
|
|
|
|
3-series Strut/Shock Mount Kit - MZ3
(more info)
This strut and shock mount package covers the front and rear rubber mounts and bushings commonly replaced during a strut and shock install. While you're installing new front struts and rear shocks these are easily installed - there's no additional labor and special tools are not required. Since these pieces are mostly rubber, they dry up and crack over time. Re-using them lead to problems with fitment or noise, and may have safety issues as well. These mounts and pads are the perfect complement to your new shocks to help restore your car's handling and performance.
We sell the basic strut and shock mount package, which includes:
Front strut mounts (also known as guide support)
Front strut reinforcement plates (to prevent cracking and deforming of the front strut towers)
Front and rear self-locking mounting nuts
Rear Lifetime Warranty 'Repair Shop' shock mounts
Rear shock mount reinforcements (to prevent cracking of shock towers)
Rear shock mount gaskets
In addition, you can add the front spring pads, front bump stops, front dust boots, rear bump stops, and rear dust boots if needed. But please note that some shocks and coil overs come with all or some of these pieces already. If in doubt, check with your supplier on what is included.
We offer three varieties of the rear shock mounts - OEM, Repair Shop, and HP alum-rubber. We recommend either the Repair Shop or HP mounts because the stock OEM design has a flaw that can lead to premature failure of the mounts. The Repair Shop and HP mounts use a different design that will last longer and the Repair Shop mounts also have a lifetime warranty!
This item fits the following BMWs:
1998-2002 Z3 BMW M Roadster M Coupe
|
| Part #: MZ3MOUNTKIT |
| Price: $287.15 (USD) |
|
|
|
|
|
 |
Front Control Arm Bracket Kit - E30, E36, Z3
(more info)
For convenience, we have assembled this bushing carrier bracket kit, to save you time when changing our control arm bushings. It includes two bushing carriers (one left, one right) and mounting bolts. Having a spare set means you can get your new bushings pre-installed and ready to go on the car (perhaps as a race/track spare?) without having to remove your current brackets and take them to the shop to press out of the old bushing and press the new ones in.
This kit includes the following items:
1 x 31121139789 - Control Arm Bushing Bracket - Left
1 x 31121139790 - Control Arm Bushing Bracket - Right
4 x 31111143348 - Flat Washer
4 x 31111137888 - Bolt
This item fits the following BMWs:
1984-1991 E30 BMW 318i 318is 318ic 325e 325es 325i 325ic 325is 325ix M3
1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Roadster
|
| Part #: TSU9995PB3 |
| Price: $98.95 (USD) |
|
|
|
|
 |
Front Control Arm Bushings (FCAB) - Centered Delrin Race - E30, E36, Z3 (Pair)
(more info)
 Rubber control arm bushings are designed to flex and absorb energy. That’s fine on a streetcar but on an all-out racing machine you want your alignment to stay constant. We have picked Delrin for this application due to its high rigidity and low coefficient of friction allowing for minimal suspension bushing deflection (geometry change) but decreasing bushing windup or drag (friction). They are not recommended for street-use but highly-recommended for track cars. They will work on all E30, E36, and Z3 models.
For convenience, we carry spare bushing carrier brackets (part# TSU9995PB3, see illustation above) and can pre-install your bushings into the carriers, if you choose. This will save you from needing specialty tools (including a hydraulic press, drills, and taps) and will allow you (or your mechanic) to perform the install much quicker. If you'd like to purchase the carriers, be sure to select that option with the drop-down menu below.
|
| Part #: TSU3080202 |
| Price: $89.95 (USD) |
|
|
|
|
|
 |
Front Control Arm Bushings (FCAB) - Centered Rubber - E30, E36, Z3 (Pair)
(more info)
Anytime that you replace your front control arms you must replace your control arm bushings. The reason is because it’s hard to tell if you’re bushings are really bad and they are often destroyed when removed. These bushings have the hole in the center.
These bushings are a great upgrade for any E30 - 318/325, E36 - 325/323/328, Z3 -1.9, 2.3, 2.5, 2.8, 3.0
They have more rubber then the stock bushings. We have found the increased volume of rubber helps the bushings last longer. These bushings can actually help reduce vibrations produced by the mass of larger wheels or brakes.
For convenience, we carry spare bushing carrier brackets (part# TSU9995PB3, see illustation above) and can pre-install your bushings into the carriers, if you choose. This will save you from needing a hydraulic press and will allow you (or your mechanic) to perform the install much quicker. This is especially useful if you want to have a set of race or track spares, ready to go. If you'd like to purchase the carriers, be sure to select that option with the drop-down menu below (sorry, no returns accepted on pre-assembly labor fee, please).
|
| Part #: 31129069035
(31-12-9-069-035)
|
| Price: $35.95 (USD) |
|
|
|
|
|
 |
Front Control Arm Bushings (FCAB) - Offset Delrin Race - E30, E36, Z3 (Pair)
(more info)
These bushings have the hole off-center to give your car a little more track, caster, and camber. This style came as standard equipment on E30M3s (8/89-later) and 1995 E36 M3 but will work with any E30, E36, Z3.
Rubber control arm bushings are designed to flex and absorb energy. That’s fine on a streetcar but on an all-out racing machine you want your alignment to stay constant. We have picked Delrin for this application doe to its high rigidity and low coefficient of friction allowing for minimal suspension bushing deflection (geometry change) but decreasing bushing windup or drag (friction). They are not recommended for street-use but highly-recommended for track cars. They will work on all E30, E36, and Z3 models.
For convenience, we carry spare bushing carrier brackets (part# TSU9995PB3, see illustation above) and can pre-install your bushings into the carriers, if you choose. This will save you from needing specialty tools (including a hydraulic press, drills, and taps) and will allow you (or your mechanic) to perform the install much quicker (sorry, no returns accepted on pre-assembly labor fee, please). If you'd like to purchase the carriers, be sure to select that option with the drop-down menu below (sorry, no returns accepted on pre-assembly labor fee, please).
|
| Part #: TSU3080D30 |
| Price: $89.95 (USD) |
|
|
|
|
|
 |
Front Control Arm Bushings (FCAB) - Offset Rubber - E30, E36, Z3 (Pair)
(more info)
Anytime that you replace your front control arms (which should be often), you must replace your control arm bushings. The reason is because it’s hard to tell if you’re bushings are really bad and they are often destroyed when removed. These bushings have the hole off-center to give your car a little more track, caster, and camber. They are a solid rubber bushing that is great for the street. These came as standard equipment on E30M3s (8/89-later) and 1995 E36 M3s.
For convenience, we carry spare bushing carrier brackets (part# TSU9995PB3, see illustation above) and can pre-install your bushings into the carriers, if you choose. This will save you from needing a hydraulic press and will allow you (or your mechanic) to perform the install much quicker. This is especially useful if you want to have a set of race or track spares, ready to go. If you'd like to purchase the carriers, be sure to select that option with the drop-down menu below (sorry, no returns accepted on pre-assembly labor fee, please).
This item fits the following BMWs:
1984-1991 E30 BMW 318i 318is 318ic 325e 325es 325i 325ic 325is M3
1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
|
| Part #: 31129064875
(31-12-9-064-875)
|
| Price: $39.50 (USD) |
|
|
|
|
|
 |
Front Control Arm Bushings (FCAB) - Standard Rubber - E36, Z3 (not M) (Pair)
(more info)
Standard front control arm bushing made by an OEM supplier. Price is for the pair.
For convenience, we carry spare bushing carrier brackets (part# TSU9995PB3, see illustation above) and can pre-install your bushings into the carriers, if you choose. This will save you from needing a hydraulic press and will allow you (or your mechanic) to perform the install much quicker. This is especially useful if you want to have a set of race or track spares, ready to go. If you'd like to purchase the carriers, be sure to select that option with the drop-down menu below (sorry, no returns accepted on pre-assembly labor fee, please). |
| Part #: 31129059288
(31-12-9-059-288)
|
| Price: $29.90 (USD) |
|
|
|
|
|
 |
Front Upper Strut/Shock Mount - Left Side - E36 M3 96-99, MZ3
(more info)
The upper strut mount provides a locating point for the top of the front struts. It contains a rubber-isolated bearing that allows the strut shaft to move independently from the rest of the suspension - a critical component for the suspension to be quiet and effective. The rubber also absorbs vibrations and impact harshness, helping to keep unwanted noise and harshness from reaching the steering wheel.
Price is per mount. This is the LEFT side (Driver's) mount.
This item fits the following BMWs:
1996-1999 E36 BMW M3
1998-2002 Z3 BMW M Roadster M Coupe
|
| Part #: 31332227897
(31-33-2-227-897)
|
| Price: $89.95 (USD) |
|
|
|
|
 |
Rear Differential Mount - Turner Solid Delrin - E30, E36 318ti, Z3
(more info)
This rear differential mount is made from near-solid Delrin plastic and is a direct replacement upgrade from the stock rubber piece. The Delrin material has almost no flex to it, which results in better response, more feedback, and more power transferred to the wheels. Because the diff on these cars acts as a 'stressed' part of the rear suspension, we only advise using this solid mount with our Turner Solid Aluminum Subframe Mounts. This part is legal in many racing classes.
This item fits the following BMWs:
1984-1991 E30 BMW 318i 318is 318ic 325e 325es 325i 325ic 325is 325ix M3
|
| Part #: TDR3080007 |
| Price: $46.95 (USD) |
|
|
|
|
 |
Rear Shock Mounts (RSM) - HP Aluminum/Rubber - E30, E36, E46, Z3, Z4 (Pair)
(more info)
These are the best rear shock mounts that we have found for the E30, E36, E46, Z3 & E85 Z4! Featuring CNC-machined billet aluminum mounting base with a replaceable urethane bushing (replacement bushings are just $15 and are changed in minutes!). These mounts are excellent for either street or track because of their low NVH (noise, vibration, and harshness). Plus, the superior design will far outlast the life of stock mounts - maybe even the car itself. You'll never think twice about your shock mounts again! These shock mounts are a direct replacement of the stock mounts so they fit all shocks with the BMW-standard 10mm shock shaft, including all factory and OEM shocks (Boge, Sachs, etc), H&R coil overs, Bilstein shocks and PSS, PSS9, PSS10 coil overs (except the B16 Ride Control Kit). This is sold as a package with new shock mount gaskets, washers, and Nyloc nuts.
This item fits the following BMWs:
1984-1991 E30 BMW 318i 318is 318ic 325e 325es 325i 325ic 325is 325ix M3
1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008 Z4 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
|
| Part #: JTD909 |
| Price: $99.95 (USD) |
|
|
|
|
 |
Rear Shock Mounts (RSM) - Repair Shop Lifetime Warranty - E30, E36, E46, Z3, Z4 (Pair)
(more info)
The rear mounts in BMW 3 series fail, no matter what year from 1983 to present, that is a weak point of the suspension. Here's the solution. The 3 Series "Repair Shop" Rear Shock Mounts carry a lifetime warranty and will last as long as you own your car. Expect the same comfortable ride you have with factory mounts. These are an inexpensive alternative to expensive factory mounts.
Make this complete by adding the mount gasket and nuts (add the option below).
|
| Part #: JRDRP |
| Price: $39.90 (USD) |
|
|
|
|
|
|
|
|
 |
Rear Shock Mounts (RSM) - Turner Motorsport Race Monoball - E30, E36, E46, Z3, Z4 (Pair)
(more info)
Want the Ultimate design in a rear shock tower mount? You've found it. These rear shock mounts are designed for use on the track and racing. This set of mounts will help your rear shocks perform the best they can in those conditions. The advantage to using a mount with spherical bearing is that it allows the shock to freely move off axis without side loading the shock shaft like rubber or polyurethane mounts do. Side loading a shock increases stiction and wear which decreases its efficiency. Because these are mounts without an isolator (rubber or polyurethane) to dampen road noise and vibrations we do not recommend them for street cars. These were designed in-house and developed for our own track and race cars.
These TMS bearing mounts include both 10mm and 12mm stainless steel bearing sleeves to work with a wide variety of shock shaft pins. The pin is the upper-most portion of the shock where it passes through the mount. If you need a bearing sleeve size other then 10mm or 12mm please contact us.
These rear shock tower mounts fit the following BMWs:
1984-1991 E30 3 series (all) incl. 318i, 318is, 325, 325e, 325es, 325i, 325is
1992-1998 E36 3 series (all) incl. 318i, 318is, 318ti, 325i, 325is, 328i, 328is, 323is
1999-2005 E46 3 series (all) incl. 323i, 323Ci, 325i, 325Ci, 328i, 328Ci, 330i, 330Ci
1988-1991 E30 M3 (all)
1995-1999 E36 M3 coupe, sedan & convertible
2001-2006 E46 M3 (all) incl. coupe & convertible
1996-2002 Z3 Roadster/Coupe including "M"
2003-2008 Z4 Roadster/Coupe including "M"
|
| Part #: TSU9906SM1 |
| Price: $169.95 (USD) |
|
|
|
|
 |
Rear Spring Pad - 5mm - E30 E36 E46 X3 Z3 Z4
(more info)
This is the rear spring pad it can be used as an upper spring pad on some cars and a lower spring pad on others.. It is a good idea to replace spring pads while replacing shocks or springs. Sold Individually.
This item fits the following BMWs:
Lower Spring Pad
1984-1991 E30 BMW 318i 318is 318ic 325e 325es 325i 325ic 325is 325ix M3
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
Upper Spring Pad
1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
2004-2010 E83 BMW X3 2.5i X3 3.0i X3 3.0si
2003-2008 Z4 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
|
| Part #: 33531136385
(33-53-1-136-385)
|
| Price: $7.95 (USD) |
|
|
|
|
 |
Rear Subframe-Diff Mount Set - Turner Solid Race - E36 318ti, Z3
(more info)
A BMW’s subframe is the heart of the rear suspension. The differential is part of the subframe, as it is a stress member system. When the subframe moves, so do all of the rear suspension mounting points. Replacing the stock rubber subframe bushings with solid aluminum will limit drivetrain and suspension movement and keep your car’s suspension geometry the way it’s supposed to be. The Delrin diff mount bushing is a near-solid mount that will last longer than the original rubber and does not 'wind up' under load/unload. This transfers more power through the axles to the wheels. The Turner Motorsport E36 318ti and Z3 solid subframe and differential mount bushing kit is a direct replacement for the stock BMW subframe mounts and differential bushing. We have incorporated ideas from our other race style solid bushings not only make these very light weight but also to be fully serviceable and removable in the case of subframe or diff cover replacement. This kit is a legal upgrade in many racing classes.
We also sell the Solid Differential mount and Subframe Mounts separately, for those that may already have one of the products or if you desire spares for fast installation. A common example is if you have two differentials with covers, and want to make fast gearing changes at the track.
 Click here for Z3 / E36ti Subframe Mount installation instructions.
Click here for Z3 / E36ti Differential installation instructions.
This item fits the following BMWs:
1995-1999 E36 BMW 318ti
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
|
| Part #: Z3,tiSRSMK |
| Price: $196.90 (USD) |
|
|
|
|
|
 |
Rear Trailing Arm Bushings (RTAB) - Polyurethane Race - E30, Z3
(more info)
These hard-poly rear trailing arm bushing kit for the E30, E30M3 and Z3 (inc M Coupe/Roadster) includes a 8 piece press in poly bushing set and metal sleeves. Made from a 75D Polyurethane, for minimal movent with good geometry set. Installation of this kit will dramatically reduce unwanted movement in the rear trailing arms of the vehicle - limiting tow and camber changes. A must for any competitive race car - may be noisy for street use. This is not a metal on metal bushing so its legal in many classes where bushing material is free.
This item fits the following BMWs:
1984-1991 E30 BMW 318i 318is 318ic 325e 325es 325i 325ic 325is 325ix M3
1995-1998 E36 BMW 318ti
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
|
| Part #: AKGRTAB |
| Price: $99.95 (USD) |
|
|
|
|
 |
Rear Trailing Arm Bushings (RTAB) - Rubber Street - E30, 318ti, Z3
(more info)
These trailing arm bushings are the stock rubber centered bushing. Each side of the car takes one pair of bushings.
This item fits the following BMWs:
1984-1991 E30 BMW 318i 318is 318ic 325e 325es 325i 325ic 325is 325ix M3
1992-1998 E36 BMW 318ti
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Roadster
|
| Part #: 33329061945
(33-32-9-061-945)
|
| Price: $19.70 (USD) |
|
|
|
|
|
|
|
Suspension Bushings and Mounts
