Contact YouTube Blog Twitter facebook Turner Motorsport on Instagram
Login   |

0 item(s) in your Shopping Cart
VAT Mode:
Get notified about money saving
specials & deals for your BMW
enter your email address
  • 22 years of BMW Tuning.
  • Award winning service.
  • 10,000's of parts in stock.
  • Quality BMW Parts only.
  • Hassle-free returns.

  • Find us on Facebook

    BMW Exhaust Gaskets Hangers and Parts

    Exhaust systems are typically split among multiple sections and each section has its own form of fasteners and attachment points. The gaskets, hangers, and seals that join each section together should be replaced any time the exhaust is removed. As the exhaust is tightened together the gaskets and seals are crushed or deformed to form a tight seal. Re-using them is possible but greatly opens up the potential for an exhaust leak. Exhaust leaks can lead to a number of major and minor problems including power loss, check engine faults, and noise issues. Replacing your hangers and gaskets will ensure you don't have to take the exhaust down all over again.
    For accurate results, specify your year and model below.
    With years of experience with dealing with exhaust systems of all kinds, we've found this product to be the BEST at fixing or preventing exhaust leaks. Just apply a light coating of Acousti/seal to pipes, flanges or slip-fit clamps before assembly for a leak free installation. 5 ounce tube (142 grams). UPS Ground shipping to the lower 48 US states only.
    Part #: 35959
    Price: $19.95 (USD) 
    This convenient kit includes all the hardware you need to replace your old, rusted (or broken) exhaust manifold studs on your M52tu-family engine's head.

    This item fits the following BMWs:
    1999-2000 E46 BMW 323i 323ci 328i 328ci
    1999-2000 E39 BMW 528i
    1999-2000 Z3 BMW Z3 2.3 Z3 2.8
    Part #: TEN4649SK2
    Price: $52.95 (USD) 
    This is the gasket that goes between the turbo outlet and downpipe on BMW's with the N54,N54T,N55,N63,N63N,S55,S63 and S63N engines. Sold Individually.

    This item fits the following BMWs:
    2004-2010 E60 BMW 535i 535xi 535i xDrive
    2010-2013 E70 BMW X5 xDrive35i X5 xDrive50i X5M
    2008-2013 E71 BMW X6 xDrive35i X6 xDrive50i X6M
    2008-2013 E82 BMW 135i 135is 1M Coupe
    2013+ E84 BMW X1 xDrive35i
    2009+ E89 BMW Z4 sDrive35i Z4 sDrive35is
    2006-2011 E90 BMW 335i 335xi 335i xDrive - Sedan
    2007-2013 E92 BMW 335i 335is 335xi 335i xDrive - Coupe
    2007-2013 E93 BMW 335i 335is - Convertible
    2009+ F01 BMW 740i 740li 740li xDrive
    2013+ F06 BMW 640i Gran Coupe 640i xDrive Gran Coupe 650i Gran Coupe 650i xDrive Gran Coupe M6 Gran Coupe
    2010+ F07 BMW 535i GT, 535i xDrive GT, 550i GT, 550i xDrive GT
    2011+ F10 BMW 535i 535i xDrive 550i 550i xDrive M5
    2012+ F12 BMW 640i 640i xDrive 650i 650i xDrive M6
    2014+ F15 BMW X5 sDrive35i X5 xDrive35i X5 xDrive50i
    2015+ F16 BMW X6 sDrive35i X6 xDrive35i X6 xDrive50i
    2014+ F23 BMW M235i
    2011+ F25 BMW X3 xDrive35i
    2015+ F26 BMW X4 xDrive35i
    2012+ F30 BMW 335i 335i xDrive - Sedan
    2013+ F32 BMW 435i 435i xDrive - Coupe
    2013+ F33 BMW 435i Convertible 435i xDrive Convertible- Convertible
    2014+ F34 BMW 335i xDrive GT - Gran Tourismo
    2014+ F36 BMW 435i Gran Coupe 435i xDrive Gran Coupe
    2015+ F80 BMW M3
    2015+ F82 BMW M4
    2015+ F85 BMW X5 M
    2015+ F86 BMW X6 M
    ࿜9乄໺쳘F꣇쓴엀F쳰F팲し틜F㿑。࿜9đࠅᕶᕶđࠆᕶᕶ࿜9đࠆᕶᕶF￿Fȇ֔ඩᕶᴯᄍ奫￝泩疦涑疦쵀Fȇ첤Fᕶ콤Fꘞ疬맽넔￾￿浑疦ധ疧Ꚕ"。ᕶ®®쵤F瀬疦®瀸疦ᧁ쓴촼F촸Fꀀ®®쨆ぎ֔ᜥꀀ૤瀸疦ᤁ쓴ꀀ쵼F푄F5+ F86 BMW X6 M
    Part #: 18307553601
    Price: $14.95 (USD) 
    E30 325, M20 525i Exhaust Manifold Gasket Set, price includes a pair.
    Part #: 11621728489-2
    Price: $29.70 (USD) 
    This is a complete exhaust hanger and bracket kit for the 1987-1992 E30 325i models. It's all of the hangers and gaskets needed for the rear muffler and a life-saving addition to any exhaust project on your car. Any of the hardware and hangers that have been on the car for a few years are prone to rust and seizing in place. So to get them off usually means breaking or cutting one or more pieces. So having this complete E30 hanger kit on hand will allow you to finish the job without scrambling for parts later on. And new hangers are always a good idea anyway.

    This 325i hanger kit includes -
    front upper muffler body clamp - 18201707925 (18211707923) - x 1
    front lower muffler body clamps - 18201178132 (18211178126) - x 2
    rear lower muffler body clamp - 18211176029 (18211176713) - x 1
    rear muffler rubber hangers - 18211712838 - x 2
    center muffler rubber hanger - 18211105635 - x 1
    muffler to center section seal ring (45mm) - 18111723541 x 1
    muffler to center section seal ring (42mm) - 18111245960 x 1
    nuts & bolts for all of the above

    There is an early and late version to the muffler band clamps but the only difference we saw was more holes in the band on the early style. The early style is included in this kit which might be better because water won't get trapped between the clamp and the muffler body.

    If you're removing the center section from the exhaust manifolds you can add those gaskets as well.

    This item fits the following BMWs:
    1987-1992 E30 BMW 325i 325ic 325is 325ix
    Part #: 558-22-35
    Price: $59.95 (USD) 
    E30 M3 Exhaust Hanger Kit. Includes all three rubber hangers for the E30 M3 exhaust system.
    Part #: E30M3HANGERKIT
    Price: $13.50 (USD) 
    This is the metal gasket that seals the exhaust manifold to the head. These are sold per cylinder so order the appropriate quantity for your engine.
    Part #: 11621312961
    Price: $19.00 (USD) 
    The E36 Exhaust Hanger and Gasket Kit includes two rear muffler hangers, two catalytic converter hangers, both gasket rings and all necessary hardware.
    Part #: E36HANGERKIT
    Price: $122.35 (USD) 
    This is the rubber hanger used to support the rear muffler on all 1995-1999 M3s. It is also used on the 2001-2006 E46 M3 (there are three used on the E46 M3, so be sure to order enough for your needs).

    This rubber exhaust hanger fits the following BMWs:
    1995-1999 E36 M3 coupe, sedan & convertible
    2001-2006 E46 M3 coupe & convertible
    Part #: 18201401797
    Price: $38.95 (USD) 
    This set of upper and lower clamps is the perfect addition to our Hanger Kit, especially if you're going back to a stock muffler from aftermarket and no longer have these required clamps. The stock mufflers (standard E36 or M3) use this clamp method around a lip on the muffler body. But most aftermarket muffler systems don't use the clamp and bolt straight to the rubber hanger. So these stock pieces are often thrown away which will make it impossible to re-install the stock muffler. These are the OEM muffler clamps.

    Kit Includes:
  • 18211723555 (18201402479), upper clamp bracket (L shaped)
  • 18211723410, lower clamp bracket
  • M8 hex bolt
  • M8 hex nut x 2

  • Sold as pictured - order 2 for a complete muffler.

    This item fits the following BMWs:
    1992-1999 E36 BMW 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
    Part #: 18211723410K
    Price: $9.95 (USD) 
    This is the rubber exhaust hanger that supports the rear muffler on non-M E36 3 series from 1992-1999. It fits 318i/is/iC 1992-1995, 325i/is/iC 1992-1995, and 328i/is/iC 1996-1999.
    Part #: 18211723101
    Price: $35.25 (USD) 
    This is the metal flange gasket that fits between the two sections of the Active Autowerke Track Pipe for E36. It's a 2-bolt gasket with 3.0" ID.

    Fits only with AA Track Pipe.
    Part #: AA TP GASKET
    Price: $19.95 (USD) 
    If you're swapping in new headers on your E46 M3 this kit of gaskets and hardware is the perfect finishing touch! Everyone knows that headers are one of the best performance gains you can do on the E46 M3 and we sell a lot of them. But new gaskets are required if you want a leak-free install and to avoid re-doing the work. This kit fits all E46 M3 (LHD only).

  • 6 x 11627830667, manifold to head gaskets
  • 18 x 11721437202, exhaust manifold nut
  • 2 x 11627830668, manifold to section 1 crush rings
  • 1 x 11727505259, air pump valve gasket

  • This item fits the following BMWs:
    2001-2006 E46 BMW M3
    Part #: E46M3HEADERKIT
    Price: $106.65 (USD) 
    This electric valve serves one of several purposes depending on which car it is used on. Please read the application listings below to ensure you are purchasing the correct part.

    This item fits the following BMWs:
    Secondary Air System Valve
    1996-1998 E36 BMW 323is 323ic 328i 328is 328ic M3
    1999-3/2003 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
    2003-2005 E46 BMW 325i 325ci (M56)
    1997-2003 E39 BMW 525i 528i 530i
    2000-2006 E53 BMW X5 3.0i
    1997-2002 Z3 BMW Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i
    1997-2000 Z3 BMW M Roadster M Coupe (S52)

    + Exhaust Flapper Valve Applications
    (click to expand)
    2008-2010 E82 BMW 128i 135i
    1996-1998 E36 BMW 323is 323ic 328i 328is 328ic
    1999-2005 E46 BMW 325i 325ci 325xi 330i 330ci 330xi
    2004-2010 E60 BMW 535i 535xi 535i xDrive 545i 550i
    2010+ F07 BMW 550i GT, 550i xDrive GT
    2011+ F10 BMW 550i 550i xDrive
    2012+ F10 BMW 528i 528i xDrive (N20 4 cylinder)
    2012+ F12 BMW 650i 650i xDrive
    2002-2008 E65 BMW 750i 750li 760i 760li
    2009+ F01 BMW 750i 750li 750i xDrive 750li xDrive 760li
    2013+ E84 BMW X1 sDrive28i X1 xDrive28i X1 xDrive35i
    2004-2010 E83 BMW X3 3.0i X3 3.0si
    2011+ F25 BMW X3 xDrive35i
    2007-2013 E70 BMW X5M
    2008+ E71 BMW X6 xDrive35i X6 xDrive50i X6M
    2009+ Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
    Part #: 11747810831
    Price: $39.95 (USD) 
    This is the exhaust gasket seal ring.

    This item fits the following BMWs:
    1996-1999 E36 BMW M3
    2001-2006 E46 BMW M3
    1998-2002 Z3 BMW M Roadster M Coupe
    2006-2008 E85 BMW Z4 M Roadster M Coupe
    Part #: 18111723379
    Price: $10.95 (USD) 
    A Do-It-Yourself exhaust install can be hard enough. But to stop in the middle of it to run to the dealer for gaskets, hangers, or special hardware is a major inconvenience. Don't be left taking the bus to the dealership on the hunt for parts. Get all of the parts you may need before the job begins! And with mileage we can almost gurantee that any section you remove will need to have new gaskets. Some of the gaskets are crushed to ensure a tight seal; other gaskets become stuck to their flanges. This set of hangers and gaskets for the 2001-2006 E46 M3 covers all of the sections of the exhaust, from the headers to the muffler.

    The exhaust on the E46 M3 is broken up into sections -
    headers - gaskets at the cylinder head and at the outlet to section 1, plus an air pump gasket
    section 1 - crush gasket rings on the inlet and flange gaskets at the outlet to section 2
    section 2 - flange gaskets at the inlet and steel exhaust rings at the outlet to the muffler
    muffler - steel exhaust rings on the inlet with special square-shouldered nuts (included with hanger/gasket kit)

    This package also includes 3 new muffler hangers and the 2 hangers in the center of the exhaust (mounted on section 1).

    We also offer most of the exhaust hardware you may need -
    Torx bolts and nuts for the header-section 1 connection
    copper nuts for the section 1-section 2 connection (M8x30 bolts can be re-used)

    2001-2006 E46 M3 coupe, convertible

    Part #: E46M3EXHGASKETS
    Price: $258.20 (USD) 
    This is the individual triangular shaped gasket that goes between the exhaust manifold / header and the engine block. There are a total of 6 of these gaskets per S54 engine. Sold individually.

    This item fits the following BMWs:
    2001-2006 E46 BMW M3
    2001-2002 Z3 BMW M Roadster M Coupe
    2006-2008 E85 BMW Z4 M Roadster M Coupe
    Part #: 11627830667
    Price: $8.95 (USD) 
    This exhaust manifold gasket fits 2.5 liter 6 cylinder engines from 1992-1995, 1995 3.0 liter M3, and all 4 cylinder engines from 1990-1999 (M42 & M44).

    It fits all 1992-1995 325i & 325is (E36), 1995 M3 3.0, 1991-1995 525i (E34), 318i/is/ti 1990-1995 (E30 & E36) and Z3 1.9 liter.

    These are sold individually. 3 are required for 6 cylinder (M50/S50) and 2 are required for 4 cylinder (M42 & M44).
    Part #: 11621728983
    Price: $8.40 (USD) 
    This exhaust manifold gasket fits 2.8 and 3.2 liter engines, as came on all 1996-1999 M3, 328i/is & 323is (E36), 1997-2000 528i (E39), and Z3 2.8 liter. These are sold individually, and 2 are required for each car.
    Part #: 11621744252
    Price: $7.95 (USD) 
    Exhaust Manifold to Catalytic Gasket Set, price is for the pair. These mount between the output side of header and the catalytic converter or center section.

    This item fits the following BMWs:
    1988-1991 E30 BMW M3
    1988 E28 BMW M5
    1991-1993 E34 BMW M5
    1987-1989 E24 BMW M6
    Part #: 11761308686
    Price: $23.90 (USD) 
    This is the circular rubber exhaust hanger to suspend the exhaust from the chassis.

    This item fits the following BMWs:
    1977-1983 E21 BMW 320i
    1984-1991 E30 BMW 318i 318is 318ic 325e 325es 325i 325ic 325is 325ix M3
    1994-1998 E36 BMW 318ti
    1976-1981 E12 BMW 528i 530i
    1982-1988 E28 BMW 524td 528e 533i 535i 535is M5
    1982-1989 E24 BMW 633csi 635csi M6
    1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.8 M Roadster M Coupe
    Part #: 18211105635
    Price: $3.95 (USD) 
    Part #: 18207832991
    Price: $29.95 (USD) 
    M50/M52 Exhaust Manifold to Catalytic Converter Gasket. 2 needed per car. Fits all cars with M50 and M52 engines.
    Part #: 18301716888
    Price: $10.40 (USD) 
    Made in the USAThis convenient kit includes all the hardware you need to replace your old, rusted (or broken?) exhaust manifold studs on your M50-family engine's head (including M50, M52, S50, S52). The perfect time to preventatively replace your exhaust studs is anytime you remove the manifolds (perhaps to install headers) or are removing the head or complete engine. Kit includes the correct number of OEM studs, copper locking nuts, and also includes two jam-nuts to be used for removing your old studs and installing the new studs. This stud and nut kit Fits 325i, 325is, 328i, 328is, 323is, E36 M3 (3.0 & 3.2 liter), E34 525i (91+), E39 528i, Z3 2.8.

    This item fits the following BMWs:
    1992-1998 E36 BMW 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
    1991-1995 E34 BMW 525i
    1997-1998 E39 BMW 528i
    1997-1998 Z3 BMW Z3 2.8 M Roadster M Roadster
    Part #: TEN3649SK1
    Price: $79.95 (USD)