_for_E46_M3_54-10468_sm.jpg) |
aFe Dynamic Air Scoop (DAS) - E46 M3
(more info)
Direct more fresh cool air from your BMW's center/nose grills to your intake, with the aFe D.A.S. (Dynamic Air Scoop). These scoops install behind your front grills to direct more airflow into the factory intake snorkel used on E46 M3 2001-2007. The Scoops are a direct bolt-in install, and include installation instructions and required hardware for a simple install. When combined with a higher flowing filter, such as the aFe stock replacement filter these scoops help get the maximum benefit of a higher efficiency filter by providing more cool, fresh outside air directly into the intake snorkel.
This aFe Intake Scoop fits the following BMWs:
2001-2007 E46 3 Series M3 M3 convertible
|
| Part #: 54-10468 |
| Price: $109.00 (USD) |
|
|
|
|
 |
aFe Dynamic Air Scoops (DAS)- - E60 M5 - E63 M6
(more info)
Direct more fresh cool air from your BMW's center/nose grills to your intake, with the aFe D.A.S. (Dynamic Air Scoops). These two "scoops" install behind your front grills to direct more airflow into the factory intake snorkel used on the 2006-2010 M5 and 2006+ M6. Scoops are a direct bolt-in install, and include installation instructions and required hardware for a simple install. When combined with a higher flowing filter, such as the aFe stock replacement filter these scoops help get the maximum benefit of a higher efficiency filter by providing more cool, fresh outside air directly into the intake snorkel. |
| Part #: 54-11278 |
| Price: $255.00 (USD) |
|
|
|
|
 |
aFe Dynamic Air Scoops (DAS) - E82/E88 1 Series 128i & 135i
(more info)
Direct more fresh cool air from your BMW's center/nose grills to your intake, with the aFe D.A.S. (Dynamic Air Scoops). These two "scoops" install behind your front grills to direct more airflow into the factory intake snorkel used on the 2008, 2009 (and newer) E82 and E88 1 series BMWs, including 128i and 135i. Scoops are a direct bolt-in install, and include installation instructions and required hardware for a simple install. When combined with a higher flowing filter, such as the aFe stock replacement filter or twin filter system (135i only), these scoops help get the maximum benefit of a higher efficiency filter by providing more cool, fresh outside air directly into the intake snorkel. Both the 3.0 naturally aspirated and twin turbo models (especially the 135i turbo) need this added air flow for best horsepower and torque.
These aFe Intake Scoops fit the following BMWs:
2008+ E82 1 Series Coupe BMW 128i & 135i coupe
2008+ E88 1 Series Convertible BMW 128i & 135i convertible
|
| Part #: 54-11648 |
| Price: $109.00 (USD) |
|
|
|
|
|
aFe Dynamic Air Scoops (DAS) - E90/E92/E93 M3, 335i & 328i
(more info)
Direct more fresh cool air from your BMW's center/nose grills to your intake, with the aFe D.A.S. (Dynamic Air Scoops). These two "scoops" install behind your front grills to direct more airflow into the factory intake snorkel used on the 2007-2008 328i, 328xi, 335i & 335xi, and 2008+ E90/E92 M3. Scoops are a direct bolt-in install, and include installation instructions and required hardware for a simple install. When combined with a higher flowing filter, such as the aFe stock replacement filter or twin filter system (335i & 335xi), these scoops help get the maximum benefit of a higher efficiency filter by providing more cool, fresh outside air directly into the intake snorkel. Both the 3.0 twin turbo models and the 4.0 V8 models especially need this added air flow for best horsepower and torque.
These aFe Intake Scoops fit the following BMWs:
2007-2008 E90/E92/E93 BMW 328i & 328xi (coupe, sedan & convertible)
2007-2008 E90/E92/E93 BMW 335i & 335xi (coupe, sedan & convertible)
2008+ E90/E92/E93 BMW M3 (coupe, sedan & convertible)
|
| Part #: 54-11478 |
| Price: $109.00 (USD) |
|
|
|
|
 |
aFe Elite Stage 2 SI - Intake Kit - E90/92/93 335i 2007-2009
(more info)
Producing 14 max horsepower and 27 lbs. x ft. torque, this radically different Stage 2 sealed cold air intake system is engineered to let maximum air in while keeping engine heat out. Featuring two uniquely shaped molded intake ducts that replaces the single stock intake tract, this intake system smoothly directs increased air flow from two direction for improved volumetric efficiency and maximum performance. So effective is the design that Intake Air Temperature (IAT) at normal running speeds with this aFe intake system is 11 degrees lower than the factory intake. Complementing the dual intake tract are two Dynamic Air Scoops (D.A.S.) that, when mounted in the front grille, further directs air into the engine. Easily accessible with a satin black powdercoated aluminum cover, an washable/reusable conical air filter is enclosed in a molded plastic housing and mounted on a oval intake tube that smoothly supplies maximum air to the twin turbos. The full effect of this system cannot be felt or tested on stationary dyno and can only be fully appreciated on the wide open highway.
By removing your stock intake air box, you are removing the most restrictive portion of your 335's intake system, increasing both horse power and torque, improving acceleration as well as throttle response.
Note: This intake system comes with Dynamic Air Scoops (D.A.S.) and both a Pro5R oiled filter and a ProDryS non-oiled filter.
For additional information check out the Tech Sheet for this aFe intake kit.
This aFe intake fits the following BMWs:
2007+ E90 3 series: BMW 335i Sedan, 335is Sedan 335Xi Sedan, 335i xDrive Sedan
2007+ E92 3 series: BMW 335i Coupe, 335is Coupe, 335Xi Coupe, 335i xDrive Coupe
2006+ E93 3 series: BMW 335i Convertible, 335is Convertible
|
| Part #: 50-81472 |
| Price: $795.00 (USD) |
|
|
|
|
 |
aFe Intake Kit - E36 323/325/328/M3, 1992-1999 - Pro5R
(more info)
Maxiumum Flow Pro5R Filter
aFe Magnum FORCE Stage 1 Cold Air Intake System. This intake kit replaces your restrictive factory air box. It features a black composite/molded tube, 16-gauge powder-coated steel heat shield, trim sealed to seal out hot engine air, and a custom aFe brand cotton filter.
aFe has reported gains of up to 25 hp and 25 lb/ft of torque when used on an M3. For maximum benefit, we recommend upgrading your engine software -- a Conforti chip for 1992-1995 or Shark Injector software for 1996-1999 cars.
This aFe intake kit fits all 1992-1999 E36 chassis 3 series 6 cylinder, including:
1992-1995 - BMW 325i, 325is & M3 3.0 liter
1996-1998 - BMW 328i, 328is, 323is and M3 3.2 liter.
1999-1999 - BMW 328is, 323is, and M3 3.2 liter
This kit was specifically designed for use on cars with the stock US headlights.
It is a very tight fit on cars with the Euro type headlights and some modifications may be required.
This version used aFe's highest flowing filter media, which uses a lightly oil gauze to filter out dirt and particulates, while allowing more air to flow to the intake. For the best flowing filter, with the best performance gain, we always recommend this standard aFe filter media (often called "Pro5R ", which has a blue pre-oiled filter media). We also carry this filter in the "ProDry" grey filter media, which is oil-free for only slightly less performance and no maintenance.
 
Simple installation using only basic tools, requiring no drilling or modifications to your BMW.
 Click
here for installation instructions.
Want an extra layer of defense? Add a pre-filter to prevent water, mud and sand from congesting your air intake system. This simple upgrade slides over the aFe filter of this intake kit, much like a sock, giving you an extra layer of defense, and extending the cleaning interval of your aFe intake's filter element. Best of all, using the Pre-Filter does not significantly diminish your air filter’s performance—the smooth rush of oxygen keeps rolling right into your engine. To add the pre-filter, just select the option for the drop-down option below.
|
| Part #: 54-10171 |
| Price: $275.00 (USD) |
|
|
|
|
|
aFe Intake Kit - E36 6-cylinder for Euro / 3.5 inch HFM - Pro5R
(more info)
Maxiumum Flow Pro5R Filter
aFe's well known cold air intake kit, Now available for those with 1995 M3 who have converted from the stock US "325" 3.0" air sensor to the popular 3.5" Euro M3 version. If you've upgraded your stock 1995 M3 3.0" mass air sensor to the larger 3.5" version (from either the Euro M3 or 540), this kit has the correct sized intake tube and coupling for your application.
Please note: If you are planning to use a 3.5" HFM on your 1995 M3, be SURE you are using the correct software/chip. We have been supplying the software for the Euro HFM conversion for many years, as developed by performance software Guru, Jim Confori. This chip provides a smooth power delivery from low RPM up to redline and the most power.
Features all the standard features of the aFe Magnum Force Cold air intake system -- black composite/molded tube, 16-gauge powder-coated steel heat shield, trim sealed to seal out hot engine air, custom aFe brand cotton filter, and full installation instructions. Euro HFM and software not included.
This version uses aFe's highest flowing filter media, which uses a lightly oil gauze to filter out dirt and particulates, while allowing more air to flow to the intake. For the best flowing filter, with the best performance gain, we always recommend this standard aFe filter media (often called "Pro5R ", which has a blue pre-oiled filter media). We also carry this filter in the "ProDry" grey filter media, which is oil-free for only slightly less performance and no maintenance. |
| Part #: 54-11362 |
| Price: $374.95 (USD) |
|
|
|
|
 |
aFe Intake Kit - E36 6-cylinder for Euro / 3.5 inch HFM - ProDry S
(more info)
"Oil-Free" ProDry S Filter
aFe's well known cold air intake kit, Now available for those with 1995 M3 who have converted from the stock US "325" 3.0" air sensor to the popular 3.5" Euro M3 version. If you've upgraded your stock 1995 M3 3.0" mass air sensor to the larger 3.5" version (from either the Euro M3 or 540), this kit has the correct sized intake tube and coupling for your application.
Please note: If you are planning to use a 3.5" HFM on your 1995 M3, be SURE you are using the correct software/chip. We have been supplying the software for the Euro HFM conversion for many years, as developed by performance software Guru, Jim Confori. This chip provides a smooth power delivery from low RPM up to redline and the most power.
Features all the standard features of the aFe Magnum Force Cold air intake system -- black composite/molded tube, 16-gauge powder-coated steel heat shield, trim sealed to seal out hot engine air, custom aFe brand cotton filter, and full installation instructions. Euro HFM and software not included.
This version has an oil-free filter media for less maintenance. For the best flowing filter, with the best performance gain, we always recommend the standard aFe "Pro5R " filter (which has a blue pre-oiled filter media), but this oil-free filter flows only slightly less than the blue Pro5R style aFe filter, and requires no re-oiling after cleaning the filter.
This item fits the following BMWs:
1995-1999 E36 BMW M3
|
| Part #: 51-11362 |
| Price: $335.00 (USD) |
|
|
|
|
 |
aFe Intake Kit - E60 M5 & E63/E64 M6 V10 - Pro5R
(more info)
Maxiumum Flow Pro5R Filter
Rid your M5 or M6's V10 powerplant of both of its restrictive factory air boxes with this cold air intake kit by aFe, and you'll cut the airflow restriction IN HALF. Air flow showed an increase of 117% and dyno testing yielded max power gains of 28hp and 24 ft/lbs of torque. The intake tubes of this kit are custom-designed to accelerate airflow for best performance. Fits all 2006, 2007, 2008 and 2009 and V10 M5 and M6.
Kit includes everything necessary to install, including installation instructions. This kit can typically be installed in less than 60 minutes, and uses all factory mounting points (no modifications). The kit uses 2 high performance 360 degree radial flow air filters which are washable/reusable. The filtration media uses the deepest pleats in the industry, allowing the most surface area and airflow possible, in the space allowed. The increased airflow is significant enough that it is audible while driving, giving your 5.0 liter V10 a subtly more aggressive sound when revving or under load. Best of all, this is a SAFE product that will not cause any longevity issues or malfunctions to your BMW's intricate engine management system.
This version uses aFe's highest flowing filter media, which uses a lightly oil gauze to filter out dirt and particulates, while allowing more air to flow to the intake. For the best flowing filter, with the best performance gain, we always recommend this standard aFe filter media (often called "Pro5R ", which has a blue pre-oiled filter media). We also carry this filter in the "ProDry" grey filter media, which is oil-free for only slightly less performance and no maintenance.
This aFe Cold Air Intake Kit fits the following BMWs:
2006,2007,2008,2009 BMW E60 M5 Sedan
2006,2007,2008,2009 BMW E63 M6 Coupe
2006,2007,2008,2009 E64 M6 Convertible
Click
here for installation instructions.
|
| Part #: 54-11272 |
| Price: $729.00 (USD) |
|
|
|
|
 |
aFe Intake Tube Upgrade Kit - E46 M3
(more info)
This torque booster tube produces 10 max horsepower, 5lbs. x ft. torque and out-flowed the factory intake by 128%. Tube upgrade for 51-10461 or 54-10461. This engineered intake tube increases air flow and velocity by controlling the air intake dynamics. This is a very simple bolt-on product and requires no cutting or drilling.
This item fits the following BMWs:
2001-2006 E46 BMW M3, M3 convertible
|
| Part #: 54-10469 |
| Price: $79.00 (USD) |
|
|
|
|
 |
aFe Stage 1 Intake Kit - E85 Z4 2.5i 2003-2005 M54 - ProDry S
(more info)
"Oil-Free" ProDry S Filter
This intake kit replaces your restrictive factory air box. It features a 3-angle aluminum velocity stack adapter, 16-gauge powder-coated steel heat shield, trim sealed to seal out hot engine air, and a custom aFe brand cotton filter.
By removing your stock intake air box, you are removing the most restrictive portion of your Z4's intake system, increasing both horse power and torque, improving acceleration as well as throttle response.
aFe is among the first intake manufacturers to offer a dry filter option on their intake kits. The Pro Dry S filter in this intake kit has an oil-free filter media that flows better than stock paper filters but requires less maintenance than alternative oiled filters. For cleaning, the dry filters need only to be brushed off and cleaned with the approved aFe Restore Kit. For maximum power gains, we recommend the Pro 5 R oiled filters. The oiled filter will flow better but will need occassional re-oiling as part of a regular maintenance schedule.
Installed:
Click
here for installation instructions.
This aFe intake fits the 2003, 2004, and 2005 BMW Z4 2.5i (M54 engine).
|
| Part #: 51-10651 |
| Price: $355.00 (USD) |
|
|
|
|
 |
aFe Stage 1 Intake Kit - E36 323i/is 325i/is 328i/is M3 - ProDry S
(more info)
"Oil-Free" ProDry S Filter
aFe Magnum FORCE Stage 1 Cold Air Intake System. This intake kit replaces your restrictive factory air box. It features a black composite/molded tube, 16-gauge powder-coated steel heat shield, trim sealed to seal out hot engine air, and a custom aFe brand cotton filter.
This version has an oil-free filter media for less maintenance. For the best flowing filter, with the best performance gain, we always recommend the standard aFe "Pro5R " filter (which has a blue pre-oiled filter media), but this oil-free filter flows only slightly less than the blue Pro5R style aFe filter, and requires no re-oiling after cleaning the filter.
aFe has reported gains of up to 25 hp and 25 lb/ft of torque when used on an M3. For maximum benefit, we recommend upgrading your engine software -- a Conforti chip for 1992-1995 or Shark Injector software for 1996-1999 cars.
This aFe intake kit fits all 1992-1999 E36 chassis 3 series 6 cylinder, including:
1992-1995 - BMW 325i, 325is & M3 3.0 liter
1996-1998 - BMW 328i, 328is, 323is and M3 3.2 liter.
1999-1999 - BMW 328is, 323is, and M3 3.2 liter
This kit was specifically designed for use on cars with the stock US headlights.
It is a very tight fit on cars with the Euro type headlights and some modifications may be required.
Simple installation using only basic tools, requiring no drilling or modifications to your BMW.
Click
here for installation instructions.
|
| Part #: 51-10171 |
| Price: $275.00 (USD) |
|
|
|
|
 |
aFe Stage 1 Intake Kit - E39 525i 528i 1997-2003 - ProDry S
(more info)
"Oil-Free" ProDry S Filter
This intake kit replaces your restrictive factory air box. It features a 3-angle aluminum velocity stack adapter, 16-gauge powder-coated steel heat shield, trim sealed to seal out hot engine air, and a custom aFe brand cotton filter.
This version has an oil-free filter media for less maintenance. For the best flowing filter, with the best performance gain, we always recommend the standard aFe "Pro5R " filter (which has a blue pre-oiled filter media), but this oil-free filter flows only slightly less than the blue Pro5R style aFe filter, and requires no re-oiling after cleaning the filter.
By removing your stock intake air box, you are removing the most restrictive portion of your intake system, increasing both horse power and torque, improving acceleration as well as throttle response.
For the maximum benefit in performance, we recommend upgrading your engine software with the Shark Injector (Click here for more info on the Shark Injector performance software.)
This aFe Intake kit fits the following BMWs:
E39 5 series: BMW 525i 528i 1997-2003
Click
here for installation instructions.
Want an extra layer of defense? Add a pre-filter to prevent water, mud and sand from congesting your air intake system. This simple upgrade slides over the aFe filter of this intake kit, much like a sock, giving you an extra layer of defense, and extending the cleaning interval of your aFe intake's filter element. Best of all, using the Pre-Filter does not significantly diminish your air filter’s performance—the smooth rush of oxygen keeps rolling right into your engine. To add the pre-filter, just select the option for the drop-down option below.
|
| Part #: 51-10601 |
| Price: $285.00 (USD) |
|
|
|
|
|
 |
aFe Stage 1 Intake Kit - E39 530i 2001-2003 - ProDry S
(more info)
"Oil-Free" ProDry S Filter
This intake kit replaces your restrictive factory air box. It features a 3-angle aluminum velocity stack adapter, 16-gauge powder-coated steel heat shield, trim sealed to seal out hot engine air, and a custom aFe brand cotton filter.
This version has an oil-free filter media for less maintenance. For the best flowing filter, with the best performance gain, we always recommend the standard aFe "Pro5R " filter (which has a blue pre-oiled filter media), but this oil-free filter flows only slightly less than the blue Pro5R style aFe filter, and requires no re-oiling after cleaning the filter.
By removing your stock intake air box, you are removing the most restrictive portion of your intake system, increasing both horse power and torque, improving acceleration as well as throttle response.
For the maximum benefit in performance, we recommend upgrading your engine software with the Shark Injector (Click here for more info on the Shark Injector performance software.)
This aFe Intake kit fits the following BMWs:
E39 5 series: 530i 2001-2003
Click here for installation instructions.
Want an extra layer of defense? Add a pre-filter to prevent water, mud and sand from congesting your air intake system. This simple upgrade slides over the aFe filter of this intake kit, much like a sock, giving you an extra layer of defense, and extending the cleaning interval of your aFe intake's filter element. Best of all, using the Pre-Filter does not significantly diminish your air filter’s performance—the smooth rush of oxygen keeps rolling right into your engine. To add the pre-filter, just select the option for the drop-down option below.
|
| Part #: 51-10671 |
| Price: $355.00 (USD) |
|
|
|
|
|
 |
aFe Stage 1 Intake Kit - E39 540i 1997-2003 - ProDry S
(more info)
"Oil-Free" ProDry S Filter
This intake kit replaces your restrictive factory air box. It features a 3-angle aluminum velocity stack adapter, 16-gauge powder-coated steel heat shield, trim sealed to seal out hot engine air, and a custom aFe brand cotton filter.
This version has an oil-free filter media for less maintenance. For the best flowing filter, with the best performance gain, we always recommend the standard aFe "Pro5R " filter (which has a blue pre-oiled filter media), but this oil-free filter flows only slightly less than the blue Pro5R style aFe filter, and requires no re-oiling after cleaning the filter.
By removing your stock intake air box, you are removing the most restrictive portion of your intake system, increasing both horse power and torque, improving acceleration as well as throttle response.
aFe has reported gains as high as 25 hp and 35 lb/ft torque for these kits, depending on application.
Click
here for installation instructions.
Click
here for Customer Review (detailed)
Want an extra layer of defense? Add a pre-filter to prevent water, mud and sand from congesting your air intake system. This simple upgrade slides over the aFe filter of this intake kit, much like a sock, giving you an extra layer of defense, and extending the cleaning interval of your aFe intake's filter element. Best of all, using the Pre-Filter does not significantly diminish your air filter’s performance—the smooth rush of oxygen keeps rolling right into your engine. To add the pre-filter, just select the option for the drop-down option below.
|
| Part #: 51-10471 |
| Price: $299.00 (USD) |
|
|
|
|
|
 |
aFe Stage 1 Intake Kit - E46 323i/ci 328i/ci 325i/ci X3 2.5i M54 - Pro5R
(more info)
Maxiumum Flow Pro5R Filter
This intake kit replaces your restrictive factory air box. It features a 3-angle aluminum velocity stack adapter, 16-gauge powder-coated steel heat shield, trim sealed to seal out hot engine air, and a custom aFe brand cotton filter.
This version uses aFe's highest flowing filter media, which uses a lightly oil gauze to filter out dirt and particulates, while allowing more air to flow to the intake. For the best flowing filter, with the best performance gain, we always recommend this standard aFe filter media (often called "Pro5R ", which has a blue pre-oiled filter media). We also carry this filter in the "ProDry" grey filter media, which is oil-free for only slightly less performance and no maintenance.
By removing your stock intake air box, you are removing the most restrictive portion of your intake system, increasing both horse power and torque, improving acceleration as well as throttle response.
For the maximum benefit in performance, we recommend upgrading your engine software with the Shark Injector (Click here for more info on the Shark Injector performance software.)
This aFe intake fits the following BMWs:
1999-2000 E46 3 series: BMW 323i 323ci 328i 328ci
2001-2006 E46 3 series: 325i 325ci 325xi + Wagon & Convertible models with M54 engine
2004-2007 E83 X3: X3 2.5i
Click
here for installation instructions.
Want an extra layer of defense? Add a pre-filter to prevent water, mud and sand from congesting your air intake system. This simple upgrade slides over the aFe filter of this intake kit, much like a sock, giving you an extra layer of defense, and extending the cleaning interval of your aFe intake's filter element. Best of all, using the Pre-Filter does not significantly diminish your air filter’s performance—the smooth rush of oxygen keeps rolling right into your engine. To add the pre-filter, just select the option for the drop-down option below.
|
| Part #: 54-10441 |
| Price: $409.00 (USD) |
|
|
|
|
 |
aFe Stage 1 Intake Kit - E46 323i/ci 328i/ci 325i/ci X3 2.5i M54 - ProDry S
(more info)
"Oil-Free" ProDry S Filter
This intake kit replaces your restrictive factory air box. It features a 3-angle aluminum velocity stack adapter, 16-gauge powder-coated steel heat shield, trim sealed to seal out hot engine air, and a custom aFe brand cotton filter.
By removing your stock intake air box, you are removing the most restrictive portion of your intake system, increasing both horse power and torque, improving acceleration as well as throttle response.
This version has an oil-free filter media for less maintenance. For the best flowing filter, with the best performance gain, we always recommend the standard aFe "Pro5R " filter (which has a blue pre-oiled filter media), but this oil-free filter flows only slightly less than the blue Pro5R style aFe filter, and requires no re-oiling after cleaning the filter.
For the maximum benefit in performance, we recommend upgrading your engine software with the Shark Injector (Click here for more info on the Shark Injector performance software.)
This aFe intake fits the following BMWs:
1999-2000 E46 3 series: BMW 323i 323ci 328i 328ci
2001-2006 E46 3 series: BMW 325i 325ci 325xi + Wagon & Convertible models with M54 engine
2004-2007 E83 X3: BMW X3 2.5i
Click
here for installation instructions.
Want an extra layer of defense? Add a pre-filter to prevent water, mud and sand from congesting your air intake system. This simple upgrade slides over the aFe filter of this intake kit, much like a sock, giving you an extra layer of defense, and extending the cleaning interval of your aFe intake's filter element. Best of all, using the Pre-Filter does not significantly diminish your air filter’s performance—the smooth rush of oxygen keeps rolling right into your engine. To add the pre-filter, just select the option for the drop-down option below.
|
| Part #: 51-10441 |
| Price: $409.00 (USD) |
|
|
|
|
|
 |
aFe Stage 1 Intake Kit - E46 325i/Ci 330i/Ci - Pro5R
(more info)
Maxiumum Flow Pro5R Filter
This intake kit replaces your restrictive factory air box. It features a 3-angle aluminum velocity stack adapter, 16-gauge powder-coated steel heat shield, trim sealed to seal out hot engine air, and a custom aFe brand cotton filter.
This version uses aFe's highest flowing filter media, which uses a lightly oil gauze to filter out dirt and particulates, while allowing more air to flow to the intake. For the best flowing filter, with the best performance gain, we always recommend this standard aFe filter media (often called "Pro5R ", which has a blue pre-oiled filter media). We also carry this filter in the "ProDry" grey filter media, which is oil-free for only slightly less performance and no maintenance.
By removing your stock intake air box, you are removing the most restrictive portion of your intake system, increasing both horse power and torque, improving acceleration as well as throttle response.
aFe has reported gains as high as 20 hp and 27 lb/ft torque on the 330i
For the maximum benefit in performance, we recommend upgrading your engine software with the Shark Injector (Click here for more info on the Shark Injector performance software.)
This aFe intake fits the following BMWs:
2003-2006 E46 3 series: 325i 325ci 325xi + Wagon & Convertible models with M56 engine
2001-2006 E46 3 series: 330i 330ci 330xi + Convertible
2004-2006 E83 X3: X3 3.0i
Click
here for installation instructions.
Want an extra layer of defense? Add a pre-filter to prevent water, mud and sand from congesting your air intake system. This simple upgrade slides over the aFe filter of this intake kit, much like a sock, giving you an extra layer of defense, and extending the cleaning interval of your aFe intake's filter element. Best of all, using the Pre-Filter does not significantly diminish your air filter’s performance—the smooth rush of oxygen keeps rolling right into your engine. To add the pre-filter, just select the option for the drop-down option below.
|
| Part #: 54-10451 |
| Price: $409.00 (USD) |
|
|
|
|
|
 |
aFe Stage 1 Intake Kit - E46 325i/Ci 330i/Ci - ProDry S
(more info)
"Oil-Free" ProDry S Filter
This intake kit replaces your restrictive factory air box. It features a 3-angle aluminum velocity stack adapter, 16-gauge powder-coated steel heat shield, trim sealed to seal out hot engine air, and a custom aFe brand cotton filter.
This version has an oil-free filter media for less maintenance. For the best flowing filter, with the best performance gain, we always recommend the standard aFe "Pro5R " filter (which has a blue pre-oiled filter media), but this oil-free filter flows only slightly less than the blue Pro5R style aFe filter, and requires no re-oiling after cleaning the filter.
By removing your stock intake air box, you are removing the most restrictive portion of your intake system, increasing both horse power and torque, improving acceleration as well as throttle response.
aFe has reported gains as high as 20 hp and 27 lb/ft torque on the 330i
For the maximum benefit in performance, we recommend upgrading your engine software with the Shark Injector (Click here for more info on the Shark Injector performance software.)
This aFe intake fits the following BMWs:
2003-2006 E46 3 series: BMW 325i 325ci 325xi + Wagon & Convertible models with M56 engine
2001-2006 E46 3 series: BMW 330i 330ci 330xi + Convertible
2004-2007 E83 X3: X3 3.0i
Click
here for installation instructions.
Want an extra layer of defense? Add a pre-filter to prevent water, mud and sand from congesting your air intake system. This simple upgrade slides over the aFe filter of this intake kit, much like a sock, giving you an extra layer of defense, and extending the cleaning interval of your aFe intake's filter element. Best of all, using the Pre-Filter does not significantly diminish your air filter’s performance—the smooth rush of oxygen keeps rolling right into your engine. To add the pre-filter, just select the option for the drop-down option below.
|
| Part #: 51-10451 |
| Price: $409.00 (USD) |
|
|
|
|
|
 |
aFe Stage 1 Intake Kit - E46 M3 - Pro5R
(more info)
Maxiumum Flow Pro5R Filter
This intake kit replaces your restrictive factory air box. It features a 3-angle aluminum velocity stack adapter, 16-gauge powder-coated steel heat shield, trim sealed to seal out hot engine air, and a custom aFe brand cotton filter.
By removing your stock intake air box, you are removing the most restrictive portion of your M3's intake system, increasing both horse power and torque, improving acceleration as well as throttle response.
This version uses aFe's highest flowing filter media, which uses a lightly oil gauze to filter out dirt and particulates, while allowing more air to flow to the intake. For the best flowing filter, with the best performance gain, we always recommend this standard aFe filter media (often called "Pro5R ", which has a blue pre-oiled filter media). We also carry this filter in the "ProDry" grey filter media, which is oil-free for only slightly less performance and no maintenance.
10 hp max gain at 6200 rpm!
5 lb/ft torque at 5000rpm!
This aFe intake fits the following BMWs:
E46 3 series: M3 Coupe, M3 Convertible
Click
here for installation instructions.
Want an extra layer of defense? Add a pre-filter to prevent water, mud and sand from congesting your air intake system. This simple upgrade slides over the aFe filter of this intake kit, much like a sock, giving you an extra layer of defense, and extending the cleaning interval of your aFe intake's filter element. Best of all, using the Pre-Filter does not significantly diminish your air filter’s performance—the smooth rush of oxygen keeps rolling right into your engine. To add the pre-filter, just select the option for the drop-down option below.
|
| Part #: 54-10461 |
| Price: $549.00 (USD) |
|
|
|
|
 |
aFe Stage 1 Intake Kit - E46 M3 - ProDry S
(more info)
"Oil-Free" ProDry S Filter
This intake kit replaces your restrictive factory air box. It features a 3-angle aluminum velocity stack adapter, 16-gauge powder-coated steel heat shield, trim sealed to seal out hot engine air, and a custom aFe brand cotton filter.
This version has an oil-free filter media for less maintenance. For the best flowing filter, with the best performance gain, we always recommend the standard aFe "Pro5R " filter (which has a blue pre-oiled filter media), but this oil-free filter flows only slightly less than the blue Pro5R style aFe filter, and requires no re-oiling after cleaning the filter.
By removing your stock intake air box, you are removing the most restrictive portion of your M3's intake system, increasing both horse power and torque, improving acceleration as well as throttle response.
10 hp max gain at 6200 rpm!
5 lb/ft torque at 5000rpm!
This aFe intake fits the following BMWs:
E46 3 series: M3 Coupe, M3 Convertible
Click
here for installation instructions.
Want an extra layer of defense? Add a pre-filter to prevent water, mud and sand from congesting your air intake system. This simple upgrade slides over the aFe filter of this intake kit, much like a sock, giving you an extra layer of defense, and extending the cleaning interval of your aFe intake's filter element. Best of all, using the Pre-Filter does not significantly diminish your air filter’s performance—the smooth rush of oxygen keeps rolling right into your engine. To add the pre-filter, just select the option for the drop-down option below.
|
| Part #: 51-10461 |
| Price: $549.00 (USD) |
|
|
|
|
|
 |
aFe Stage 1 Intake Kit - E53 X5 3.0i 2001-2006 - ProDry S
(more info)
"Oil-Free" ProDry S Filter
This intake kit replaces the upper half of your factory air box. It features 16-gauge powder-coated steel heat shield, molded intake tub, trim sealed to seal out hot engine air, and a custom aFe brand cotton filter.
This version has an oil-free filter media for less maintenance. For the best flowing filter, with the best performance gain, we always recommend the standard aFe "Pro5R " filter (which has a blue pre-oiled filter media), but this oil-free filter flows only slightly less than the blue Pro5R style aFe filter, and requires no re-oiling after cleaning the filter.
By removing the stock intake internals, you are removing the most restrictive portion of your X5's intake system, increasing both horse power and torque, improving acceleration as well as throttle response.
Click
here for installation instructions.
|
| Part #: 51-10691 |
| Price: $245.00 (USD) |
|
|
|
|
 |
aFe Stage 1 Intake Kit - E53 X5 4.4i 4.8is 2000-2006 M62 engine - ProDry S
(more info)
"Oil-Free" ProDry S Filter
This intake kit replaces your restrictive factory air box. It features a 3-angle velocity stack adapter, 16-gauge powder-coated steel heat shield, trim sealed to seal out hot engine air, and a custom aFe brand cotton filter.
This version has an oil-free filter media for less maintenance. For the best flowing filter, with the best performance gain, we always recommend the standard aFe "Pro5R " filter (which has a blue pre-oiled filter media), but this oil-free filter flows only slightly less than the blue Pro5R style aFe filter, and requires no re-oiling after cleaning the filter.
By removing your stock intake air box, you are removing the most restrictive portion of your X5's intake system, increasing both horse power and torque, improving acceleration as well as throttle response.
Click
here for installation instructions.
Want an extra layer of defense? Add a pre-filter to prevent water, mud and sand from congesting your air intake system. This simple upgrade slides over the aFe filter of this intake kit, much like a sock, giving you an extra layer of defense, and extending the cleaning interval of your aFe intake's filter element. Best of all, using the Pre-Filter does not significantly diminish your air filter’s performance—the smooth rush of oxygen keeps rolling right into your engine. To add the pre-filter, just select the option for the drop-down option below.
|
| Part #: 51-10681 |
| Price: $285.00 (USD) |
|
|
|
|
 |
aFe Stage 1 Intake Kit - E60 545i, E63 645ci 2004-2005 - ProDry S
(more info)
"Oil-Free" ProDry S Filter
This intake kit replaces your restrictive factory air box. It features a 3-angle aluminum velocity stack adapter, 16-gauge powder-coated steel heat shield, trim sealed to seal out hot engine air, and a custom aFe brand cotton filter.
This version has an oil-free filter media for less maintenance. For the best flowing filter, with the best performance gain, we always recommend the standard aFe "Pro5R " filter (which has a blue pre-oiled filter media), but this oil-free filter flows only slightly less than the blue Pro5R style aFe filter, and requires no re-oiling after cleaning the filter.
By removing your stock intake air box, you are removing the most restrictive portion of your intake system, increasing both horse power and torque, improving acceleration as well as throttle response. |
| Part #: 51-11081 |
| Price: $299.00 (USD) |
|
|
|
|
 |
aFe Stage 1 Intake Kit - E85 Z4 3.0i 2003-2005 M54 engine - ProDry S
(more info)
"Oil-Free" ProDry S Filter
This intake kit replaces your restrictive factory air box. It features a 3-angle aluminum velocity stack adapter, 16-gauge powder-coated steel heat shield, trim sealed to seal out hot engine air, and a custom aFe brand cotton filter.
By removing your stock intake air box, you are removing the most restrictive portion of your Z4's intake system, increasing both horse power and torque, improving acceleration as well as throttle response.
11hp max gain, 14 lb/ft torque max gain.
aFe is among the first intake manufacturers to offer a dry filter option on their intake kits. The Pro Dry S filter in this intake kit has an oil-free filter media that flows better than stock paper filters but requires less maintenance than alternative oiled filters. For cleaning, the dry filters need only to be brushed off and cleaned with the approved aFe Restore Kit. For maximum power gains, we recommend the Pro 5 R oiled filters. The oiled filter will flow better but will need occassional re-oiling as part of a regular maintenance schedule.
Click
here for installation instructions.
This aFe intake fits the 2003, 2004, 2005 BMW BMW Z4 3.0i (M54 engine) |
| Part #: 51-10661 |
| Price: $385.00 (USD) |
|
|
|
|
 |
aFe Stage 1 Intake Kit - E85 Z4 M Roadster Z4 M Coupe - ProDry S
(more info)
"Oil-Free" ProDry S Filter
This intake kit replaces your restrictive factory air box. It features a 16-gauge powder-coated steel heatshield that blocks hot air from entering the filter. Each intake kit has a custom application-specific aFe cone filter that replaces the stock panel filter. The larger aFe filter, combined with the heat shield allows more air to flow to the engine. By removing your stock intake air box, you are removing the most restrictive portion of your intake system, increasing both horsepower and torque, improving acceleration and throttle response, and producing a more-aggressive engine note. Step-by-step instructions for a quick and easy install are included. aFe reports a gain of 11hp and 10ft/lbs of torque on the Z4 M.
aFe is among the first intake manufacturers to offer a dry filter option on their intake kits. The Pro Dry S filter in this intake kit has an oil-free filter media that flows better than stock paper filters but requires less maintenance than alternative oiled filters. For cleaning, the dry filters need only to be brushed off and cleaned with the approved aFe Restore Kit. For maximum power gains, we recommend the Pro 5 R oiled filters. The oiled filter will flow better but will need occassional re-oiling as part of a regular maintenance schedule.
This aFe intake kit fits all 2006+ MZ4 including:
2006-2008 E85 MZ4 BMW M Roadster
2006-2008 E86 MZ4 BMW M Coupe
|
| Part #: 51-11521 |
| Price: $545.00 (USD) |
|
|
|
|
 |
aFe Stage 1 Intake Kit - MZ4 M Roadster & Coupe - Pro5R
(more info)
Maxiumum Flow Pro5R Filter
This intake kit replaces your restrictive factory air box. It features a 16-gauge powder-coated steel heatshield that blocks hot air from entering the filter. Each intake kit has a custom application-specific aFe cone filter that replaces the stock panel filter. The larger aFe Pro 5 R oiled filter, combined with the heat shield, improves airflow by 90%! By removing your stock intake air box, you are removing the most restrictive portion of your intake system, increasing both horsepower and torque, improving acceleration and throttle response, and producing a more-aggressive engine note. Step-by-step instructions for a quick and easy install are included.
aFe reports a gain of 11hp and 10ft/lbs of torque on the Z4 M.
This version uses aFe's highest flowing filter - the Pro 5 R. This filter uses a 5-layer, lightly-oiled cotton gauze material to filter out dirt and particulates, while improving airflow through the intake. For the best flowing filter, with the best performance gain, we always recommend the oiled aFe filter over the dry versions. The Pro 5 R filter is washable and re-oiled using aFe's approved Restore Kit.
This aFe intake kit fits all 2006, 2007, and 2008 MZ4 including:
2006-2008 E85 MZ4 BMW M Roadster
2006-2008 E86 MZ4 BMW M Coupe
|
| Part #: 54-11521 |
| Price: $545.00 (USD) |
|
|
|
|
 |
aFe Stage 1 Intake Kit - Z3 2.8 1997-1999
(more info)
This Stage 1 cold air intake system produces 4 max horsepower, 5 lbs. x ft. torque over the factory intake. This intake uses a durable, one-piece, 16 gauge, powder-coated heat shield; this air intake system features a washable/reusable conical air filter. This intake system incorporates a unique 3-angle filter adapter that smooths air transition into the intake tract for better performance. One-piece heat shield requires little or no assembly and the filter is constructed with 100% polyurethane for long life and multiple cleaning cycles. This air intake system features either a washable/reusable conical Pro 5R air filter for maximum flow or Pro Dry S filter for maximum convenience.
By removing your stock intake air box, you are removing the most restrictive portion of your intake system, increasing both horsepower and torque, improving acceleration and throttle response, and producing a more-aggressive engine note.
Pro5R filter uses a lightly oil gauze to filter out dirt and particulates, while allowing more air to flow to the intake. For the best flowing filter, with the best performance gain, we always recommend this standard aFe filter media
ProDry S filter uses an oil-free filter media for less maintenance. This oil-free filter flows only slightly less than the blue Pro5R style aFe filter, and requires no re-oiling after cleaning the filter.
This item fits the following BMWs:
1997-1999 Z3 BMW Z3 2.8i
|
| Part #: 54-11951X |
| Price: $328.00 (USD) |
|
|
|
|
|
 |
aFe Stage 1 Pro5R Intake Kit - 2003-2005 Z4 2.5i (M54) - Pro5R
(more info)
Maxiumum Flow Pro5R Filter
This intake kit replaces your restrictive factory air box. It features a 3-angle aluminum velocity stack adapter, 16-gauge powder-coated steel heat shield, trim sealed to seal out hot engine air, and a custom aFe brand cotton filter.
By removing your stock intake air box, you are removing the most restrictive portion of your Z4's intake system, increasing both horse power and torque, improving acceleration as well as throttle response.
This version uses aFe's highest flowing filter - the Pro 5 R. This filter uses a 5-layer, lightly-oiled cotton gauze material to filter out dirt and particulates, while improving airflow through the intake. For the best flowing filter, with the best performance gain, we always recommend the oiled aFe filter over the dry versions. The Pro 5 R filter is washable and re-oiled using aFe's approved Restore Kit.
Installed:
Click
here for installation instructions.
This aFe intake kit fits the 2003, 2004, 2005 Z4 2.5i (M54 engine) |
| Part #: 54-10651 |
| Price: $355.00 (USD) |
|
|
|
|
 |
aFe Stage 1 Pro5R intake Kit - E39 530i - Pro5R
(more info)
Maxiumum Flow Pro5R Filter
This intake kit replaces your restrictive factory air box. It features a 3-angle aluminum velocity stack adapter, 16-gauge powder-coated steel heat shield, trim sealed to seal out hot engine air, and a custom aFe brand cotton filter.
This version uses aFe's highest flowing filter media, which uses a lightly oil gauze to filter out dirt and particulates, while allowing more air to flow to the intake. For the best flowing filter, with the best performance gain, we always recommend this standard aFe filter media (often called "Pro5R ", which has a blue pre-oiled filter media). We also carry this filter in the "ProDry" grey filter media, which is oil-free for only slightly less performance and no maintenance.
By removing your stock intake air box, you are removing the most restrictive portion of your intake system, increasing both horse power and torque, improving acceleration as well as throttle response.
For the maximum benefit in performance, we recommend upgrading your engine software with the Shark Injector (Click here for more info on the Shark Injector performance software.)
Click here for installation instructions.
Want an extra layer of defense? Add a pre-filter to prevent water, mud and sand from congesting your air intake system. This simple upgrade slides over the aFe filter of this intake kit, much like a sock, giving you an extra layer of defense, and extending the cleaning interval of your aFe intake's filter element. Best of all, using the Pre-Filter does not significantly diminish your air filter’s performance—the smooth rush of oxygen keeps rolling right into your engine. To add the pre-filter, just select the option for the drop-down option below.
|
| Part #: 54-10671 |
| Price: $355.00 (USD) |
|
|
|
|
 |
aFe Stage 1 Pro5R Intake Kit - E39 540i - Pro5R
(more info)
Maxiumum Flow Pro5R Filter
This intake kit replaces your restrictive factory air box. It features a 3-angle aluminum velocity stack adapter, 16-gauge powder-coated steel heat shield, trim sealed to seal out hot engine air, and a custom aFe brand cotton filter.
This version uses aFe's highest flowing filter media, which uses a lightly oil gauze to filter out dirt and particulates, while allowing more air to flow to the intake. For the best flowing filter, with the best performance gain, we always recommend this standard aFe filter media (often called "Pro5R ", which has a blue pre-oiled filter media). We also carry this filter in the "ProDry" grey filter media, which is oil-free for only slightly less performance and no maintenance.
By removing your stock intake air box, you are removing the most restrictive portion of your intake system, increasing both horse power and torque, improving acceleration as well as throttle response.
aFe has reported gains as high as 25 hp and 35 lb/ft torque for these kits, depending on application.
Click
here for installation instructions.
Click
here for Customer Review (detailed)
Want an extra layer of defense? Add a pre-filter to prevent water, mud and sand from congesting your air intake system. This simple upgrade slides over the aFe filter of this intake kit, much like a sock, giving you an extra layer of defense, and extending the cleaning interval of your aFe intake's filter element. Best of all, using the Pre-Filter does not significantly diminish your air filter’s performance—the smooth rush of oxygen keeps rolling right into your engine. To add the pre-filter, just select the option for the drop-down option below.
|
| Part #: 54-10471 |
| Price: $299.00 (USD) |
|
|
|
|
 |
aFe Stage 1 Pro5R Intake Kit - E53 X5 3.0 liter 2001-2005 - Pro5R
(more info)
Maxiumum Flow Pro5R Filter
This intake kit replaces the upper half of your factory air box. It features 16-gauge powder-coated steel heat shield, molded intake tub, trim sealed to seal out hot engine air, and a custom aFe brand cotton filter.
This version uses aFe's highest flowing filter media, which uses a lightly oil gauze to filter out dirt and particulates, while allowing more air to flow to the intake. For the best flowing filter, with the best performance gain, we always recommend this standard aFe filter media (often called "Pro5R ", which has a blue pre-oiled filter media). We also carry this filter in the "ProDry" grey filter media, which is oil-free for only slightly less performance and no maintenance.
By removing the stock intake internals, you are removing the most restrictive portion of your X5's intake system, increasing both horse power and torque, improving acceleration as well as throttle response.
Click
here for installation instructions.
|
| Part #: 54-10691 |
| Price: $245.00 (USD) |
|
|
|
|
 |
aFe Stage 1 Pro5R Intake Kit - E53 X5 4.4 and 4.8 liter 2001-2006 - Pro5R
(more info)
Maxiumum Flow Pro5R Filter
This intake kit replaces your restrictive factory air box. It features a 3-angle velocity stack adapter, 16-gauge powder-coated steel heat shield, trim sealed to seal out hot engine air, and a custom aFe brand cotton filter.
This version uses aFe's highest flowing filter media, which uses a lightly oil gauze to filter out dirt and particulates, while allowing more air to flow to the intake. For the best flowing filter, with the best performance gain, we always recommend this standard aFe filter media (often called "Pro5R ", which has a blue pre-oiled filter media). We also carry this filter in the "ProDry" grey filter media, which is oil-free for only slightly less performance and no maintenance.
By removing your stock intake air box, you are removing the most restrictive portion of your X5's intake system, increasing both horse power and torque, improving acceleration as well as throttle response.
Click
here for installation instructions.
Want an extra layer of defense? Add a pre-filter to prevent water, mud and sand from congesting your air intake system. This simple upgrade slides over the aFe filter of this intake kit, much like a sock, giving you an extra layer of defense, and extending the cleaning interval of your aFe intake's filter element. Best of all, using the Pre-Filter does not significantly diminish your air filter’s performance—the smooth rush of oxygen keeps rolling right into your engine. To add the pre-filter, just select the option for the drop-down option below.
|
| Part #: 54-10681 |
| Price: $285.00 (USD) |
|
|
|
|
 |
aFe Stage 1 Pro5R Intake Kit - E60 545i, E63 645ci 2004-2005 - Pro5R
(more info)
Maxiumum Flow Pro5R Filter
This intake kit replaces your restrictive factory air box. It features a 3-angle aluminum velocity stack adapter, 16-gauge powder-coated steel heat shield, trim sealed to seal out hot engine air, and a custom aFe brand cotton filter.
This version uses aFe's highest flowing filter media, which uses a lightly oil gauze to filter out dirt and particulates, while allowing more air to flow to the intake. For the best flowing filter, with the best performance gain, we always recommend this standard aFe filter media (often called "Pro5R ", which has a blue pre-oiled filter media). We also carry this filter in the "ProDry" grey filter media, which is oil-free for only slightly less performance and no maintenance.
By removing your stock intake air box, you are removing the most restrictive portion of your intake system, increasing both horse power and torque, improving acceleration as well as throttle response. |
| Part #: 54-11081 |
| Price: $299.00 (USD) |
|
|
|
|
|
aFe Stage 1 Pro5R Intake Kit - E85 Z4 3.0i 2003-2005 (M54) - Pro5R
(more info)
Maxiumum Flow Pro5R Filter
This intake kit replaces your restrictive factory air box. It features a 3-angle aluminum velocity stack adapter, 16-gauge powder-coated steel heat shield, trim sealed to seal out hot engine air, and a custom aFe brand cotton filter.
By removing your stock intake air box, you are removing the most restrictive portion of your Z4's intake system, increasing both horse power and torque, improving acceleration as well as throttle response.
11hp max gain, 14 lb/ft torque max gain.
This version uses aFe's highest flowing filter - the Pro 5 R. This filter uses a 5-layer, lightly-oiled cotton gauze material to filter out dirt and particulates, while improving airflow through the intake. For the best flowing filter, with the best performance gain, we always recommend the oiled aFe filter over the dry versions. The Pro 5 R filter is washable and re-oiled using aFe's approved Restore Kit.
Click
here for installation instructions.
This aFe intake fits the 2003, 2004, 2005 Z4 3.0i (M54 engine) |
| Part #: 54-10661 |
| Price: $385.00 (USD) |
|
|
|
|
 |
aFe Stage 2 Intake Kit - E90/E92/E93 M3 with DAS Scoops
(more info)
The latest generation M3 V8 engine benefits greatly from improving the intake system. This high-revving 4.0 liter S65 engine is thirsty for more fresh, cool, dense air to assist in combustion. Reduce the power-robbing drag and decrease intake air temperatures on your E90 or E92 M3 intake system by eliminating the stock BMW M3 airbox. This AFE engineered intake system is designed to flow the most air (+85% over stock) with the least amount of restriction, dyno tested to make the best horse power and torque gains, maintain proper air filtration, decrease intake air temperatures, and have a superior fit and finish deserving of living under the hood of this latest generation V8 M3 V8. AFE has scored yet another winning solution with this sophisticated and high tech design. We're also confident you'll enjoy the enhanced intake "growl" this intake gives the M3 from under the hood -- this is performance you can actually hear when get into the accelerator.
+15 hp / +13 ft-lbs
This kit features a CAD designed intake tube system, which is tuned for optimum flow in the space provided. A large 6 inch diameter AFE Pro5R filter is used for optimal air flow and impeccable filtration of even the smallest micron particles. This E9X M3 intake also has a full fabricated 6061 aluminum cover and housing, which is power coated in a matte-black to have a more a more "stealth" (yet race inspired) look. Includes a set of aFe Dynamic Air Scoops - a $179.95 value!
The kit installs easily around 30 to 40 minutes, using standard tools, and is 100% bolt on -- no cutting, no drilling and no modifications. It comes complete with installation instructions (with photos), and is a straight-forward do it yourself install. This kit simply has it all -- performance, sound, appearance, and ease of installation.
This aFe Intake Kit fits the following BMWs:
2008+ E90 BMW M3 sedan
2008+ E92 BMW M3 coupe
2008+ E93 BMW M3 convertible
|
| Part #: 50-11662-BV |
| Price: $995.00 (USD) |
|
|
|
|
 |
aFe Stage 2 Intake Kit - 135i, 335i 2011+ w N55 engine
(more info)
This BMW 335i air intake system removes the restrictive factory air box. aFe claims 17 max horsepower, 23lbs. x ft. torque and out-flowed the factory intake by 44% on the awesome BMW N55 E90, E92, E93 and E82, E88 135i . This system includes a durable 16 gauge, powder-coated heat shield; this air intake system features a washable/reusable conical Pro 5R air filter for maximum flow. This intake system also features a heat-insulating molded plastic tube that replaces the stock intake tract and directs increased air flow with improved volumetric efficiency for maximum performance. The one-piece heat shield requires little or no assembly and the filter is constructed with 100% polyurethane for long life and multiple cleaning cycles.
Choose from Pro5R oiled filter for maximum flow or ProDry S oil-free filter media for maximum convenience.
Pro5R filter uses a lightly oil gauze to filter out dirt and particulates, while allowing more air to flow to the intake. For the best flowing filter, with the best performance gain, we always recommend this standard aFe filter media
ProDry S filter uses an oil-free filter media for less maintenance. This oil-free filter flows only slightly less than the blue Pro5R style aFe filter, and requires no re-oiling after cleaning the filter.
This item fits the following BMWs:
2011+ E82 BMW 135i
2011+ E90 BMW 335i 335xi 335i xDrive
2011+ E92 BMW 335i 335xi 335i xDrive
2011+ E93 BMW 335i
|
| Part #: 54-11912X |
| Price: $449.00 (USD) |
|
|
|
|
|
 |
aFe Stage 2 Intake Kit - E39 M5 1999-2003 - ProDry S
(more info)
"Oil-Free" ProDry S Filter
This intake kit replaces the top-half of both your factory air boxes. It features two 3-angle aluminum velocity stack adapters, 16-gauge powder-coated steel heat shields, trim sealed to seal out hot engine air, two custom aFe brand cotton filters, all hardware, and installation instructions.
This version has an oil-free filter media for less maintenance. For the best flowing filter, with the best performance gain, we always recommend the standard aFe "Pro5R " filter (which has a blue pre-oiled filter media), but this oil-free filter flows only slightly less than the blue Pro5R style aFe filter, and requires no re-oiling after cleaning the filter.
By converting your stock intake air boxes, you are improving the most restrictive portion of your M5's intake system, increasing horse power by 10 hp, torque by 10 lb/ft, improving acceleration as well as throttle response.
10hp max gain, 10 lb/ft torque max gain
Click
here for installation instructions.
|
| Part #: 51-10852 |
| Price: $545.00 (USD) |
|
|
|
|
 |
aFe Stage 2 Intake Kit - E46 323i/ci 328i/ci 325i/ci 330i/ci 1999-2006 - Pro5R
(more info)
Maxiumum Flow Pro5R Filter
This intake kit replaces your restrictive factory air box. It features a 3-angle aluminum velocity stack adapter, 16-gauge powder-coated steel heat shield, trim sealed to seal out hot engine air, and a custom aFe brand cotton filter.
This version uses aFe's highest flowing filter media, which uses a lightly oil gauze to filter out dirt and particulates, while allowing more air to flow to the intake. For the best flowing filter, with the best performance gain, we always recommend this standard aFe filter media (often called "Pro5R ", which has a blue pre-oiled filter media). We also carry this filter in the "ProDry" grey filter media, which is oil-free for only slightly less performance and no maintenance.
By removing your stock intake air box, you are removing the most restrictive portion of your intake system, increasing both horse power and torque, improving acceleration as well as throttle response.
aFe has reported gains as high as 6 hp and 12 lb/ft torquei
For the maximum benefit in performance, we recommend upgrading your engine software with the Shark Injector (Click here for more info on the Shark Injector performance software.)
This aFe intake fits the following BMWs:
1999-2006 E46 BMW 323i 323ci 328i 328ci 330i 330ci 330xi
2001-2006 E46 BMW325i 325ci 325xi - Only with M54 Engine - Not for SULEV M56 engine
|
| Part #: 54-20442 |
| Price: $287.00 (USD) |
|
|
|
|
 |
aFe Stage 2 Intake Kit - E46 323i/ci 328i/ci 325i/ci 330i/ci 1999-2006 - ProDry S
(more info)
"Oil-Free" ProDry S Filter
This intake kit replaces your restrictive factory air box. It features a 3-angle aluminum velocity stack adapter, 16-gauge powder-coated steel heat shield, trim sealed to seal out hot engine air, and a custom aFe brand cotton filter.
This version has an oil-free filter media for less maintenance. For the best flowing filter, with the best performance gain, we always recommend the standard aFe "Pro5R " filter (which has a blue pre-oiled filter media), but this oil-free filter flows only slightly less than the blue Pro5R style aFe filter, and requires no re-oiling after cleaning the filter.
By removing your stock intake air box, you are removing the most restrictive portion of your intake system, increasing both horse power and torque, improving acceleration as well as throttle response.
aFe has reported gains as high as 6 hp and 12 lb/ft torque
For the maximum benefit in performance, we recommend upgrading your engine software with the Shark Injector
(Click here for more info on the Shark Injector performance software.)
This aFe intake fits the following BMWs:
1999-2006 E46 BMW 323i 323ci 328i 328ci 330i 330ci 330xi
2001-2006 E46 BMW325i 325ci 325xi - Only with M54 Engine - Not for SULEV M56 engine
|
| Part #: 51-20442 |
| Price: $287.00 (USD) |
|
|
|
|
 |
aFe Stage 2 Intake Kit - E46 M3 - Pro5R
(more info)
Maxiumum Flow Pro5R Filter
This intake kit replaces your restrictive factory air box. It features 16-gauge powder-coated steel heat shield, trim sealed to seal out hot engine air, and a custom aFe brand cotton filter.
By removing your stock intake air box, you are removing the most restrictive portion of your M3's intake system, increasing both horse power and torque, improving acceleration as well as throttle response.
This version uses aFe's highest flowing filter media, which uses a lightly oil gauze to filter out dirt and particulates, while allowing more air to flow to the intake. For the best flowing filter, with the best performance gain, we always recommend this standard aFe filter media (often called "Pro5R ", which has a blue pre-oiled filter media). We also carry this filter in the "ProDry" grey filter media, which is oil-free for only slightly less performance and no maintenance.
12 hp gain at 4900 rpm!
11 lb/ft torque at 4900rpm!
This aFe intake fits the following BMWs:
E46 3 series: M3 Coupe, M3 Convertible
Click
here for installation instructions.
|
| Part #: 54-10462 |
| Price: $399.00 (USD) |
|
|
|
|
 |
aFe Stage 2 Intake Kit - E46 M3 - ProDry S
(more info)
"Oil-Free" ProDry S Filter
This intake kit replaces your restrictive factory air box. It features 16-gauge powder-coated steel heat shield, trim sealed to seal out hot engine air, and a custom aFe brand cotton filter.
This version has an oil-free filter media for less maintenance. For the best flowing filter, with the best performance gain, we always recommend the standard aFe "Pro5R " filter (which has a blue pre-oiled filter media), but this oil-free filter flows only slightly less than the blue Pro5R style aFe filter, and requires no re-oiling after cleaning the filter.
By removing your stock intake air box, you are removing the most restrictive portion of your M3's intake system, increasing both horse power and torque, improving acceleration as well as throttle response.
12 hp gain at 4900 rpm!
11 lb/ft torque at 4900rpm!
This aFe intake fits the following BMWs:
E46 3 series: BMW M3 Coupe, M3 Convertible
Click
here for installation instructions.
|
| Part #: 51-10462 |
| Price: $399.00 (USD) |
|
|
|
|
 |
aFe Stage 2 Intake Kit - E60 525i 530i 2004-2005 M54 Engine - Pro5R
(more info)
Maxiumum Flow Pro5R Filter
This intake kit replaces your restrictive factory air box. It features a 16-gauge powder-coated steel heat shield, heat-resistant molded intake tube, trim sealed to seal out hot engine air, and a custom application-specific aFe brand cotton filter.
This version uses aFe's highest flowing filter media, which uses a lightly oil gauze to filter out dirt and particulates, while allowing more air to flow to the intake. For the best flowing filter, with the best performance gain, we always recommend this standard aFe filter media (often called "Pro5R ", which has a blue pre-oiled filter media). We also carry this filter in the "ProDry" grey filter media, which is oil-free for only slightly less performance and no maintenance.
By removing your stock intake air box, you are removing the most restrictive portion of your intake system, increasing both horse power and torque, improving acceleration as well as throttle response. |
| Part #: 54-11572 |
| Price: $355.00 (USD) |
|
|
|
|
 |
aFe Stage 2 Intake Kit - E60 525i 530i 2004-2005 M54 Engine - ProDry S
(more info)
"Oil-Free" ProDry S Filter
This intake kit replaces your restrictive factory air box. It features a 16-gauge powder-coated steel heat shield, heat-resistant molded intake tube, trim sealed to seal out hot engine air, and a custom application-specific aFe brand cotton filter.
This version has an oil-free filter media for less maintenance. For the best flowing filter, with the best performance gain, we always recommend the standard aFe "Pro5R " filter (which has a blue pre-oiled filter media), but this oil-free filter flows only slightly less than the blue Pro5R style aFe filter, and requires no re-oiling after cleaning the filter.
By removing your stock intake air box, you are removing the most restrictive portion of your intake system, increasing both horse power and torque, improving acceleration as well as throttle response. |
| Part #: 51-11572 |
| Price: $355.00 (USD) |
|
|
|
|
 |
aFe Stage 2 Intake Kit - E60 525i 530i 2006-2007 N52 engine - ProDry S
(more info)
"Oil-Free" ProDry S Filter
This intake kit replaces your restrictive factory air box. It features a 16-gauge powder-coated steel heat shield, heat-resistant molded intake tube, trim sealed to seal out hot engine air, and a custom application-specific aFe brand cotton filter.
This version has an oil-free filter media for less maintenance. For the best flowing filter, with the best performance gain, we always recommend the standard aFe "Pro5R " filter (which has a blue pre-oiled filter media), but this oil-free filter flows only slightly less than the blue Pro5R style aFe filter, and requires no re-oiling after cleaning the filter.
By removing your stock intake air box, you are removing the most restrictive portion of your 5 series' intake system, increasing both horse power and torque, improving acceleration as well as throttle response.
Click
here for installation instructions.
|
| Part #: 51-11042 |
| Price: $335.00 (USD) |
|
|
|
|
 |
aFe Stage 2 Intake Kit - E60 550i E63 650i 2006-2008 - ProDry S
(more info)
"Oil-Free" ProDry S Filter
This intake kit replaces your restrictive factory air box. It features a 16-gauge powder-coated steel heat shield, heat-resistant molded intake tube, trim sealed to seal out hot engine air, and a custom application-specific aFe brand cotton filter.
This version has an oil-free filter media for less maintenance. For the best flowing filter, with the best performance gain, we always recommend the standard aFe "Pro5R " filter (which has a blue pre-oiled filter media), but this oil-free filter flows only slightly less than the blue Pro5R style aFe filter, and requires no re-oiling after cleaning the filter.
By removing your stock intake air box, you are removing the most restrictive portion of your intake system, increasing both horse power and torque, improving acceleration as well as throttle response. |
| Part #: 51-11142 |
| Price: $455.00 (USD) |
|
|
|
|
 |
aFe Stage 2 Intake Kit - E60 M5 E63 M6 2006-2008 V10 - ProDry S
(more info)
"Oil-Free" ProDry S Filter
Rid your M5 or M6's V10 powerplant of both of its restrictive factory air boxes with this cold air intake kit by aFe, and you'll cut the airflow restriction IN HALF. Air flow showed an increase of 117% and dyno testing yielded max power gains of 28hp and 24 ft/lbs of torque. The intake tubes of this kit are custom-designed to accelerate airflow for best performance. Fits all 2006, 2007, 2008 and 2009 and V10 M5 and M6.
Kit includes everything necessary to install, including installation instructions. This kit can typically be installed in less than 60 minutes, and uses all factory mounting points (no modifications). The kit uses 2 high performance 360 degree radial flow air filters which are washable/reusable. The filtration media uses the deepest pleats in the industry, allowing the most surface area and airflow possible, in the space allowed. The increased airflow is significant enough that it is audible while driving, giving your 5.0 liter V10 a subtly more aggressive sound when revving or under load. Best of all, this is a SAFE product that will not cause any longevity issues or malfunctions to your BMW's intricate engine management system.
This aFe Cold Air Intake Kit fits the following BMWs:
2006,2007,2008,2009 E60 M5 Sedan
2006,2007,2008,2009 E63 M6 Coupe
2006,2007,2008,2009 E64 M6 Convertible
Click
here for installation instructions.
|
| Part #: 51-11272 |
| Price: $729.00 (USD) |
|
|
|
|
 |
aFe Stage 2 Intake Kit - E65 745i/Li 2002-2005 - Pro5R
(more info)
Maxiumum Flow Pro5R Filter
This intake kit replaces your restrictive factory air box. It features a 16-gauge powder-coated steel heat shield, heat-resistant molded intake tube, trim sealed to seal out hot engine air, and a custom application-specific aFe brand cotton filter.
This version uses aFe's highest flowing filter media, which uses a lightly oil gauze to filter out dirt and particulates, while allowing more air to flow to the intake. For the best flowing filter, with the best performance gain, we always recommend this standard aFe filter media (often called "Pro5R ", which has a blue pre-oiled filter media). We also carry this filter in the "ProDry" grey filter media, which is oil-free for only slightly less performance and no maintenance.
By removing your stock intake air box, you are removing the most restrictive portion of your intake system, increasing both horse power and torque, improving acceleration as well as throttle response.
This item fits the following BMWs:
2002-2005 E65 BMW 745i 745li
|
| Part #: 54-11732 |
| Price: $437.00 (USD) |
|
|
|
|
 |
aFe Stage 2 Intake Kit - E65 745i/Li 2002-2005 - ProDry S
(more info)
"Oil-Free" ProDry S Filter
This intake kit replaces your restrictive factory air box. It features a 16-gauge powder-coated steel heat shield, heat-resistant molded intake tube, trim sealed to seal out hot engine air, and a custom application-specific aFe brand cotton filter.
This version has an oil-free filter media for less maintenance. For the best flowing filter, with the best performance gain, we always recommend the standard aFe "Pro5R " filter (which has a blue pre-oiled filter media), but this oil-free filter flows only slightly less than the blue Pro5R style aFe filter, and requires no re-oiling after cleaning the filter.
By removing your stock intake air box, you are removing the most restrictive portion of your intake system, increasing both horse power and torque, improving acceleration as well as throttle response. |
| Part #: 51-11732 |
| Price: $437.00 (USD) |
|
|
|
|
|
aFe Stage 2 Intake Kit - E82 E88 135i 2008-2010 - Pro5R
(more info)
Maxiumum Flow Pro5R Filter
This intake kit replaces your restrictive factory air box. It features a 16-gauge powder-coated steel heat shield, heat-resistant molded intake tube, trim sealed to seal out hot engine air, and a custom application-specific aFe brand cotton filter.
This version uses aFe's highest flowing filter - the Pro 5 R. This filter uses a 5-layer, lightly-oiled cotton gauze material to filter out dirt and particulates, while improving airflow through the intake. For the best flowing filter, with the best performance gain, we always recommend the oiled aFe filter over the dry versions. The Pro 5 R filter is washable and re-oiled using aFe's approved Restore Kit.
By removing your stock intake air box, you are removing the most restrictive portion of your intake system, increasing both horse power and torque, improving acceleration as well as throttle response.
This item fits the following BMWs:
2008-2010 E82 BMW 135i
|
| Part #: 54-11643 |
| Price: $407.00 (USD) |
|
|
|
|
 |
aFe Stage 2 Intake Kit - E82 E88 135i 2008-2010 - ProDry S
(more info)
"Oil-Free" ProDry S Filter
This intake kit replaces your restrictive factory air box. It features a 16-gauge powder-coated steel heat shield, heat-resistant molded intake tube, trim sealed to seal out hot engine air, and a custom application-specific aFe brand cotton filter.
This version has an oil-free filter media for less maintenance. For the best flowing filter, with the best performance gain, we always recommend the standard aFe "Pro5R " filter (which has a blue pre-oiled filter media), but this oil-free filter flows only slightly less than the blue Pro5R style aFe filter, and requires no re-oiling after cleaning the filter.
By removing your stock intake air box, you are removing the most restrictive portion of your intake system, increasing both horse power and torque, improving acceleration as well as throttle response. |
| Part #: 51-11643 |
| Price: $407.00 (USD) |
|
|
|
|
 |
aFe Stage 2 Intake Kit - E82/E88 135i, E90/E92 335i & 335xi, and E60 535i & 535xi - Pro5R
(more info)
Maxiumum Flow Pro5R Filter
TIncrease horse power and torque in your twin-turbo charged BMW 135i, 335i, 335xi, 535i or 535xi with this twin-filter element aFe cold air intake system. aFe has reported gains of 27hp and 34 ft/lbs of torque with this kit, which increases airflow 98% over the stock airbox. Installs in under an hour!
This BMW 335i air intake system is one of the easiest and most effective ways to increase your BMW's performance. The kit includes all parts and installation instructions to replace the restrictive factory air box with a low-restriction, high-flow filtering system. The kit includes a one-piece precision molded twin intake tube, 16 gauge powder coated steel heat shield, and gasket -- all assisting in blocking out hot engine air for cooler, denser air mass.
This version uses aFe's highest flowing filter media, which uses a lightly oil gauze to filter out dirt and particulates, while allowing more air to flow to the intake. For the best flowing filter, with the best performance gain, we always recommend this standard aFe filter media (often called "Pro5R ", which has a blue pre-oiled filter media). We also carry this filter in the "ProDry" grey filter media, which is oil-free for only slightly less performance and no maintenance.
This aFe Intake Kit fits the following BMWs:
2007-2010 E90 3 Series Sedan BMW 335i & 335xi
2007-2010 E92 3 Series Coupe BMW 335i & 335xi
2010+ E92 3 Series Coupe BMW 335is
2008-2010 E82 1 Series Coupe BMW 135i
2011+ E82 1 Series Coupe BMW 1M Coupe
2008-2010 E88 1 Series Convertible BMW 135i
2007-2010 E60 5 Series BMW 535i & 535xi
|
| Part #: 54-11472 |
| Price: $365.00 (USD) |
|
|
|
|
 |
aFe Stage 2 Intake Kit - E85 Z4 3.0i 2006-2008 (N52 engine)
(more info)
This Stage 2 cold air intake system produces 18 max horsepower, 15 lbs. x ft. torque over the factory intake. This intake uses a durable, one-piece, 16 gauge, black powder-coated heat shield and a 3-angle adaptor for maximum flow. This air intake system features either a washable/reusable conical Pro 5R air filter for maximum flow or Pro Dry S filter for maximum convenience. This intake system also features a heat-insulating molded plastic tube that replaces the stock intake tract and directs increased air flow with improved volumetric efficiency for maximum performance. This system is finished off with a black powdercoated top for an aggressive, yet stealthy appearance.
By removing your stock intake air box, you are removing the most restrictive portion of your intake system, increasing both horsepower and torque, improving acceleration and throttle response, and producing a more-aggressive engine note.
Pro5R filter uses a lightly oil gauze to filter out dirt and particulates, while allowing more air to flow to the intake. For the best flowing filter, with the best performance gain, we always recommend this standard aFe filter media
ProDry S filter uses an oil-free filter media for less maintenance. This oil-free filter flows only slightly less than the blue Pro5R style aFe filter, and requires no re-oiling after cleaning the filter.
This aFe Intake fits the following BMWs:
2006-2008 Z4 BMW Z4 3.0i - not for 3.0Si
|
| Part #: 54-11942 |
| Price: $395.00 (USD) |
|
|
|
|
|
 |
aFe Stage 2 Intake Kit - E85 Z4 3.0Si 2006-2008 (N52 engine) - ProDry S
(more info)
"Oil-Free" ProDry S Filter
This intake kit replaces your restrictive factory air box. It features a 16-gauge powder-coated steel heatshield that blocks hot air from entering the filter. Stage 2 intake kits also feature a heat-resistant plastic-molded intake tube that smooths airflow into the throttle body, improving airflow and throttle response. Each intake kit has a custom application-specific aFe filter.
By removing your stock intake air box, you are removing the most restrictive portion of your intake system, increasing both horsepower and torque, improving acceleration and throttle response, and producing a more-aggressive engine note.
aFe is among the first intake manufacturers to offer a dry filter option on their intake kits. The Pro Dry S filter in this intake kit has an oil-free filter media that flows better than stock paper filters but requires less maintenance than alternative oiled filters. For cleaning, the dry filters need only to be brushed off and cleaned with the approved aFe Restore Kit. For maximum power gains, we recommend the Pro 5 R oiled filters. The oiled filter will flow better but will need occassional re-oiling as part of a regular maintenance schedule.
This aFe intake kit fits 2006, 2007, 2008 Z4 models (E85, E86), including:
2006-08 Z4 3.0Si Roadster, Coupe
|
| Part #: 51-11602 |
| Price: $425.00 (USD) |
|
|
|
|
|
aFe Stage 2 Intake Kit - E85 Z4 3.0Si 2006-2008 (N52 engine) -Pro5R
(more info)
Maxiumum Flow Pro5R Filter
This intake kit replaces your restrictive factory air box. It features a 16-gauge powder-coated steel heatshield that blocks hot air from entering the filter. Stage 2 intake kits also feature a heat-resistant plastic-molded intake tube that smooths airflow into the throttle body, improving airflow and throttle response. Each intake kit has a custom application-specific aFe filter.
By removing your stock intake air box, you are removing the most restrictive portion of your intake system, increasing both horsepower and torque, improving acceleration and throttle response, and producing a more-aggressive engine note.
This version uses aFe's highest flowing filter - the Pro 5 R. This filter uses a 5-layer, lightly-oiled cotton gauze material to filter out dirt and particulates, while improving airflow through the intake. For the best flowing filter, with the best performance gain, we always recommend the oiled aFe filter over the dry versions. The Pro 5 R filter is washable and re-oiled using aFe's approved Restore Kit.
This aFe intake kit fits 2006, 2007, 2008 Z4 models (E85, E86), including:
2006-08 Z4 3.0Si Roadster, Coupe
|
| Part #: 54-11602 |
| Price: $425.00 (USD) |
|
|
|
|
 |
aFe Stage 2 Intake Kit - E90/92/93 325i 328i 330i 2006-2008 - ProDry S
(more info)
"Oil-Free" ProDry S Filter
This intake kit replaces the top-half of both your factory air boxes. It features two 3-angle aluminum velocity stack adapters, 16-gauge powder-coated steel heat shields, trim sealed to seal out hot engine air, two custom aFe brand cotton filters, all hardware, and installation instructions.
This version has an oil-free filter media for less maintenance. For the best flowing filter, with the best performance gain, we always recommend the standard aFe "Pro5R " filter (which has a blue pre-oiled filter media), but this oil-free filter flows only slightly less than the blue Pro5R style aFe filter, and requires no re-oiling after cleaning the filter.
By removing your stock intake air box, you are removing the most restrictive portion of your engine's intake system, increasing both horse power and torque, improving acceleration as well as throttle response.
This aFe intake fits the following BMWs:
2006+ E90 3 series: 325i Sedan, 328i Sedan, 330i Sedan, 325xi Sedan, 328Xi Sedan. 328i xDrive Sedan, 330xi Sedan
2006+ E92 3 series: 328i Coupe, 328Xi Coupe, 328i xDrive Coupe
2006+ E93 3 series: 328i Convertible
6.5 hp gain (max) at 4900 rpm
7 lb/ft torque (max) at 4900rpm
Click
here for installation instructions.
|
| Part #: 51-11012 |
| Price: $355.00 (USD) |
|
|
|
|
 |
aFe Stage 2 Intake Kit - E90/92/93 335i 2007-2010 - ProDry S
(more info)
"Oil-Free" ProDry S Filter
This intake kit replaces your restrictive factory air box. It features a 16-gauge powder-coated steel heat shield, heat-resistant molded intake tube, trim sealed to seal out hot engine air, and a custom application-specific aFe brand cotton filter.
This version has an oil-free filter media for less maintenance. For the best flowing filter, with the best performance gain, we always recommend the standard aFe "Pro5R " filter (which has a blue pre-oiled filter media), but this oil-free filter flows only slightly less than the blue Pro5R style aFe filter, and requires no re-oiling after cleaning the filter.
By removing your stock intake air box, you are removing the most restrictive portion of your intake system, increasing both horse power and torque, improving acceleration as well as throttle response.
This aFe intake fits the following BMWs:
2007-2010 E90 3 series: BMW 335i Sedan, 335Xi Sedan, 335i xDrive Sedan
2007-2010 E92 3 series: BMW 335i Coupe, 335Xi Coupe, 335i xDrive Coupe
2010+ E92 3 series: BMW 335is Coupe
2006-2010 E93 3 series: BMW 335i Convertible, 335is Convertible
2010+ E93 3 series: BMW 335is Convertible
|
| Part #: 51-11473 |
| Price: $409.00 (USD) |
|
|
|
|
 |
aFe Stage 2 Intake Kit - E90/92/93 335i 2007-2010 - Pro5R
(more info)
Maxiumum Flow Pro5R Filter
This intake kit replaces your restrictive factory air box. It features 16-gauge powder-coated steel heat shield, trim sealed to seal out hot engine air, and a custom aFe brand cotton filter.
This version uses aFe's highest flowing filter media, which uses a lightly oil gauze to filter out dirt and particulates, while allowing more air to flow to the intake. For the best flowing filter, with the best performance gain, we always recommend this standard aFe filter media (often called "Pro5R ", which has a blue pre-oiled filter media). We also carry this filter in the "ProDry" grey filter media, which is oil-free for only slightly less performance and no maintenance.
By removing your stock intake air box, you are removing the most restrictive portion of your 335's intake system, increasing both horse power and torque, improving acceleration as well as throttle response.
This aFe intake fits the following BMWs:
2007-2010 E90 3 series: BMW 335i Sedan, 335is Sedan 335Xi Sedan, 335i xDrive Sedan
2007-2010 E92 3 series: BMW 335i Coupe, 335is Coupe, 335Xi Coupe, 335i xDrive Coupe
2010+ E92 3 series: BMW 335is Coupe
2006-2010 E93 3 series: BMW 335i Convertible, 335is Convertible
2010+ E93 3 series: BMW 335is Convertible
|
| Part #: 54-11473 |
| Price: $409.00 (USD) |
|
|
|
|
 |
aFe Stage 2 Intake Kit - E90/92/93 335i, 2007-2010, E82 135i, E60 535i - ProDry S
(more info)
"Oil-Free" ProDry S Filter
Increase horse power and torque in your twin-turbo charged BMW 135i, 335i, 335xi, 535i or 535xi with this twin-filter element aFe cold air intake system. aFe has reported gains of 27hp and 34 ft/lbs of torque with this kit, which increases airflow 98% over the stock airbox. Installs in under an hour!
The aFe Intake system is one of the easiest and most effective ways to increase your BMW's performance. The kit includes all parts and installation instructions to replace the restrictive factory air box with a low-restriction, high-flow filtering system. The kit includes a one-piece precision molded twin intake tube, 16 gauge powder coated steel heat shield, and gasket -- all assisting in blocking out hot engine air for cooler, denser air mass.
This aFe Intake Kit fits the following BMWs:
2007-2010 E90 3 Series Sedan - BMW 335i & 335xi
2007-2010 E92 3 Series Coupe - BMW 335i & 335xi
2010+ E92 3 Series Coupe - BMW 335is
2008-2010 E82 1 Series Coupe - BMW 135i
2011+ E82 1 Series Coupe - BMW 1M Coupe
2008-2010 E88 1 Series Convertible - BMW 135i
2007-2010 E60 5 Series - BMW 535i & 535xi
|
| Part #: 51-11472 |
| Price: $365.00 (USD) |
|
|
|
|
_50-11662B_sm.jpg) |
aFe Stage 2 Intake Kit - E90/E92/E93 M3 - Replaces Stock Airbox
(more info)
The latest generation M3 V8 engine benefits greatly from improving the intake system. This high-revving 4.0 liter S65 engine is thirsty for more fresh, cool, dense air to assist in combustion. Reduce the power-robbing drag and decrease intake air temperatures on your E90 or E92 M3 intake system by eliminating the stock BMW M3 airbox. This AFE engineered intake system is designed to flow the most air (+85% over stock) with the least amount of restriction, dyno tested to make the best horse power and torque gains, maintain proper air filtration, decrease intake air temperatures, and have a superior fit and finish deserving of living under the hood of this latest generation V8 M3 V8. AFE has scored yet another winning solution with this sophisticated and high tech design. We're also confident you'll enjoy the enhanced intake "growl" this intake gives the M3 from under the hood -- this is performance you can actually hear when get into the accelerator.
+15 hp / +13 ft-lbs
This kit features a CAD designed intake tube system, which is tuned for optimum flow in the space provided. A large 6 inch diameter AFE Pro5R filter is used for optimal air flow and impeccable filtration of even the smallest micron particles. This E9X M3 intake also has a full fabricated 6061 aluminum cover and housing, which is power coated in a matte-black to have a more a more "stealth" (yet race inspired) look.
The kit installs easily around 30 to 40 minutes, using standard tools, and is 100% bolt on -- no cutting, no drilling and no modifications. It comes complete with installation instructions (with photos), and is a straight-forward do it yourself install. This kit simply has it all -- performance, sound, appearance, and ease of installation.
This aFe Intake Kit fits the following BMWs:
2008+ E90 BMW M3 sedan
2008+ E92 BMW M3 coupe
2008+ E93 BMW M3 convertible
|
| Part #: 50-11662-B |
| Price: $895.00 (USD) |
|
|
|
|
 |
aFe Stage 2 Intake Kit - E90/E92/E93 M3 - Retains Stock Airbox
(more info)
This unique intake system is designed to use the factory intake box to seal the intake tube and filter and tube against unwanted underhood temperatures while increasing air flow and velocity for optimum performance. This air intake system features either a ProDry S or Pro5R air (choose below), a dyno tuned intake tube and all the hardware necessary for an easy installation. This system is truly a silent killer
Choose from Pro5R oiled filter for maximum flow or ProDry S oil-free filter media for maximum convenience.
Pro5R filter uses a lightly oil gauze to filter out dirt and particulates, while allowing more air to flow to the intake. For the best flowing filter, with the best performance gain, we always recommend this standard aFe filter media
ProDry S filter uses an oil-free filter media for less maintenance. This oil-free filter flows only slightly less than the blue Pro5R style aFe filter, and requires no re-oiling after cleaning the filter.
This aFe Intake Kit fits the following BMWs:
2008+ E90 BMW M3 Sedan
2008+ E92 BMW M3 Coupe
2008+ E93 BMW M3 Convertible
|
| Part #: 54-31662 |
| Price: $448.00 (USD) |
|
|
|
|
|
 |
aFe Stage 2 Pro5R Intake Kit - E39 M5 - Pro5R
(more info)
Maxiumum Flow Pro5R Filter
This intake kit replaces the top-half of both your factory air boxes. It features two 3-angle aluminum velocity stack adapters, 16-gauge powder-coated steel heat shields, trim sealed to seal out hot engine air, two custom aFe brand cotton filters, all hardware, and installation instructions.
This version uses aFe's highest flowing filter media, which uses a lightly oil gauze to filter out dirt and particulates, while allowing more air to flow to the intake. For the best flowing filter, with the best performance gain, we always recommend this standard aFe filter media (often called "Pro5R ", which has a blue pre-oiled filter media). We also carry this filter in the "ProDry" grey filter media, which is oil-free for only slightly less performance and no maintenance.
By converting your stock intake air boxes, you are improving the most restrictive portion of your M5's intake system, increasing horse power by 10 hp, torque by 10 lb/ft, improving acceleration as well as throttle response.
10hp max gain, 10 lb/ft torque max gain
Click
here for installation instructions.
|
| Part #: 54-10852 |
| Price: $545.00 (USD) |
|
|
|
|
 |
aFe Stage 2 Pro5R Intake Kit - E53 X5 4.4i 4.8is - Pro5R
(more info)
Maxiumum Flow Pro5R Filter
This intake kit replaces your restrictive factory air box. It features 16-gauge powder-coated steel heat shield, trim sealed to seal out hot engine air, and a custom aFe brand cotton filter.
This version uses aFe's highest flowing filter media, which uses a lightly oil gauze to filter out dirt and particulates, while allowing more air to flow to the intake. For the best flowing filter, with the best performance gain, we always recommend this standard aFe filter media (often called "Pro5R ", which has a blue pre-oiled filter media). We also carry this filter in the "ProDry" grey filter media, which is oil-free for only slightly less performance and no maintenance.
By removing your stock intake air box, you are removing the most restrictive portion of your M3's intake system, increasing both horse power and torque, improving acceleration as well as throttle response.
|
| Part #: 54-10682 |
| Price: $425.00 (USD) |
|
|
|
|
 |
aFe Stage 2 Pro5R Intake Kit - E60 525i & 530i - Pro5R
(more info)
Maxiumum Flow Pro5R Filter
This intake kit replaces your restrictive factory air box. It features a 16-gauge powder-coated steel heat shield, heat-resistant molded intake tube, trim sealed to seal out hot engine air, and a custom application-specific aFe brand cotton filter.
This version uses aFe's highest flowing filter media, which uses a lightly oil gauze to filter out dirt and particulates, while allowing more air to flow to the intake. For the best flowing filter, with the best performance gain, we always recommend this standard aFe filter media (often called "Pro5R ", which has a blue pre-oiled filter media). We also carry this filter in the "ProDry" grey filter media, which is oil-free for only slightly less performance and no maintenance.
By removing your stock intake air box, you are removing the most restrictive portion of your 5 series' intake system, increasing both horse power and torque, improving acceleration as well as throttle response.
Click
here for installation instructions.
|
| Part #: 54-11042 |
| Price: $335.00 (USD) |
|
|
|
|
 |
aFe Stage 2 Pro5R Intake Kit - E60 550i, E63 650i - Pro5R
(more info)
Maxiumum Flow Pro5R Filter
11.75 hp and 10.50 lb/ft torque gain!
This intake kit replaces your restrictive factory air box. It features a 3-angle velocity stack adapter, heat-block molded intake tube, 16-gauge powder-coated steel heat shield, trim sealed to seal out hot engine air, and a custom aFe brand cotton filter.
This version uses aFe's highest flowing filter media, which uses a lightly oil gauze to filter out dirt and particulates, while allowing more air to flow to the intake. For the best flowing filter, with the best performance gain, we always recommend this standard aFe filter media (often called "Pro5R ", which has a blue pre-oiled filter media). We also carry this filter in the "ProDry" grey filter media, which is oil-free for only slightly less performance and no maintenance.
By removing your stock intake air box, you are removing the most restrictive portion of your V8's intake system, increasing both horse power and torque, improving acceleration as well as throttle response.
11.75 hp gain at 5900 rpm
10.50 lb/ft torque at 4000rpm
Click
here for installation instructions.
|
| Part #: 54-11142 |
| Price: $455.00 (USD) |
|
|
|
|
 |
aFe Stage 2 Pro5R Intake Kit - MINI Cooper S 2002-2006 - Pro5R
(more info)
Maxiumum Flow Pro5R Filter
This intake kit replaces your restrictive factory air box to give you more power and better throttle response. Enclosed in a durable 16 gauge, powder-coated heat shield; this air intake system features a washable/reusable conical air filter that improves airflow for increased horsepower and torque. Heat shield requires little or no assembly and the filter is constructed with 100% polyurethane for long life and multiple cleaning cycles.
This version uses aFe's highest flowing filter media, which uses a lightly oil gauze to filter out dirt and particulates, while allowing more air to flow to the intake. For the best flowing filter, with the best performance gain, we always recommend this standard aFe filter media (often called "Pro5R ", which has a blue pre-oiled filter media). We also carry this filter in the "ProDry" grey filter media, which is oil-free for only slightly less performance and no maintenance.
This aFe cold air intake fits the following MINIs:
2005-2008 R52 MINI MINI Cooper S Convertible.
2002-2006 R53 MINI MINI Cooper S
|
| Part #: 54-10572 |
| Price: $275.00 (USD) |
|
|
|
|
 |
aFe Stage 2 SI Intake Kit - 335i 135i, 535i Z435 with N54 engine
(more info)
Add 14 max horsepower and 27 lbs. x ft. torque to your BMW with the N54 Turbo engine! We offer several aFe Intake Kits for the 135i 335i 535i. The benefit on this system over the less expensive systems is that it is sealed to keep engine heat out while allowing maximum air flow. The molded plastic intake box smoothly directs increased air flow for improved volumetric efficiency and maximum performance. So effective is the design that Intake Air Temperature (IAT) at normal running speeds with this aFe intake system is 11 degrees cooler than the factory intake. Easily accessible with a satin black powder coated aluminum cover, an washable/reusable conical air filter is enclosed in a molded plastic housing and mounted on a oval intake tube that smoothly supplies maximum air to the twin turbos. Click Here for Installation Instructions
Choose from Pro 5 R - oiled filter or ProDry S - dry filter. The Pro 5 R filter is aFe's highest flowing filter media, which uses a lightly oil gauze to filter out dirt and particulates, while allowing more air to flow to the intake. For the best flowing filter, with the best performance gain, we always recommend this standard aFe filter media (often called "Pro5R ", which has a blue pre-oiled filter media). We also carry this filter in the "ProDry S" grey filter media, which is oil-free for only slightly less performance and no maintenance.
This item fits the following BMWs:
2008-2010 E82 BMW 135i
2010+ E82 BMW 1M Coupe
2006-2010 E90 BMW 335i 335xi 335i xDrive
2007-2010 E92 BMW 335i 335is 335xi 335i xDrive
2011 E92 BMW 335is
2007-2010 E93 BMW 335i
2011 E93 BMW 335is
2004-2010 E60 BMW 535i 535xi 535i xDrive
2009-2010 Z4 BMW Z4 sDrive35i Z4 sDrive35is
|
| Part #: 54-8200X |
| Price: $495.00 (USD) |
|
|
|
|
|
 |
aFe Stage1 Pro5R Intake Kit - E39 528i & 525i - Pro5R
(more info)
Maxiumum Flow Pro5R Filter
This intake kit replaces your restrictive factory air box. It features a 3-angle aluminum velocity stack adapter, 16-gauge powder-coated steel heat shield, trim sealed to seal out hot engine air, and a custom aFe brand cotton filter.
This version uses aFe's highest flowing filter media, which uses a lightly oil gauze to filter out dirt and particulates, while allowing more air to flow to the intake. For the best flowing filter, with the best performance gain, we always recommend this standard aFe filter media (often called "Pro5R ", which has a blue pre-oiled filter media). We also carry this filter in the "ProDry" grey filter media, which is oil-free for only slightly less performance and no maintenance.
By removing your stock intake air box, you are removing the most restrictive portion of your intake system, increasing both horse power and torque, improving acceleration as well as throttle response.
For the maximum benefit in performance, we recommend upgrading your engine software with the Shark Injector (Click here for more info on the Shark Injector performance software.)
Click
here for installation instructions.
Want an extra layer of defense? Add a pre-filter to prevent water, mud and sand from congesting your air intake system. This simple upgrade slides over the aFe filter of this intake kit, much like a sock, giving you an extra layer of defense, and extending the cleaning interval of your aFe intake's filter element. Best of all, using the Pre-Filter does not significantly diminish your air filter’s performance—the smooth rush of oxygen keeps rolling right into your engine. To add the pre-filter, just select the option for the drop-down option below.
|
| Part #: 54-10601 |
| Price: $285.00 (USD) |
|
|
|
|
 |
aFe Super Stock Intake System - E46 325i 325ci 325xi 2001-2006
(more info)
The aFe Super Stock air intake system is one of the simplest and effective ways to increase performance in your BMW 323i/325i (E46). This intake system features the high performance Pro 5R air filter for maximum flow and high filtration (98.6% efficient). Also included with this system is the Dynamic Air Scoop for increased air flow and the Silver Bullet throttle body spacer for maximum air velocity. This Super Stock intake system comes with all components and hardware for a hassle free installation. This truly is a stealth system.
This item fits the following BMWs:
2001-2006 E46 BMW325i 325ci 325xi
|
| Part #: 55-10440 |
| Price: $249.00 (USD) |
|
|
|
|
 |
aFe SuperStock Intake - E46 M3 (Filter, Intake Scoops & Restore Kit) - Pro5R
(more info)
Maxiumum Flow Pro5R Filter
Increase your M3's intake flow by 24%, for a gain of 8.8 horsepower and 10 lb/ft of torque to the wheels, by upgrading your E46 M3's stock paper intake filter with an aFe High Performance airfilter and the Dynamic Air Scoops (D.A.S.) which install behind the front grills of your M3 to direct more cool air to the intake. The air scoops are a direct fit for the E46 M3, installs simply and easily using common tools (instruction included), and maintains the stock air box for a "stealth" install. Both the air scoops and the filter work in tandem; The high efficiency aFe air filter reduces restriction through the filter, while the Dynamic Air Scoops direct more of the fresh/cool air coming into the nose grills into the intake. More cool air, less restriction, and more precious power.
This kit includes 1 stock-replacement air filter element, 1 - dynamic air scoop, as well as filter restore kit for cleaning and reconditioning the re-useable filter element (a $12.49 value!).
This aFe Super Stock Filter & Intake Scoop kit fits the following BMWs:
2001-2007 E46 M3
This version uses aFe's highest flowing filter media, which uses a lightly oil gauze to filter out dirt and particulates, while allowing more air to flow to the intake. For the best flowing filter, with the best performance gain, we always recommend this standard aFe filter media (often called "Pro5R ", which has a blue pre-oiled filter media). We also carry this filter in the "ProDry" grey filter media, which is oil-free for only slightly less performance and no maintenance. |
| Part #: 55-10460 |
| Price: $199.00 (USD) |
|
|
|
|
 |
aFe SuperStock Intake - E60 M5 - E63 M6 (Filter, Intake Scoops & Restore Kit) - Pro5R
(more info)
Maxiumum Flow Pro5R Filter
Increase your intake flow by 45%, by upgrading your E60 BMW M5 or E63 BMW M6 stock paper intake filter with an aFe High Performance air filter and the Dynamic Air Scoops (D.A.S.) which install behind the front grills of your M5 or M6 to direct more cool air to the intake. The air scoops are a direct fit for the E60 M5 E63 M6 and installs simply and easily using common tools (instruction included), and maintains the stock air box for a "stealth" install. Both the air scoops and the filter work in tandem; The high efficiency aFe air filter reduces restriction through the filter, while the Dynamic Air Scoops direct more of the fresh/cool air coming into the nose grills into the intake. More cool air, less restriction, and more precious power.
This kit includes 2 stock-replacement air filter element, (2) dynamic air scoops (left and right), as well as filter restore kit for cleaning and reconditioning the re-useable filter element (a $12.49 value!).
This aFe Super Stock Filter & Intake Scoop kit fits the following BMWs:
2006+ E60 BMW M5
2006+ E63 BMW M6 coupe & Convertible
This version uses aFe's highest flowing filter media, which uses a lightly oil gauze to filter out dirt and particulates, while allowing more air to flow to the intake. For the best flowing filter, with the best performance gain, we always recommend this standard aFe filter media (often called "Pro5R ", which has a blue pre-oiled filter media). We also carry this filter in the "ProDry" grey filter media, which is oil-free for only slightly less performance and no maintenance. |
| Part #: 55-11270 |
| Price: $345.00 (USD) |
|
|
|
|
 |
aFe SuperStock Intake - E60 M5 - E63 M6 (Filter, Intake Scoops & Restore Kit) - ProDry S
(more info)
"Oil-Free" ProDry S Filter
Increase your intake flow by 45%, by upgrading your E60 BMW M5 or E63 BMW M6 stock paper intake filter with an aFe High Performance air filter and the Dynamic Air Scoops (D.A.S.) which install behind the front grills of your M5 or M6 to direct more cool air to the intake. The air scoops are a direct fit for the E60 M5 E63 M6 and installs simply and easily using common tools (instruction included), and maintains the stock air box for a "stealth" install. Both the air scoops and the filter work in tandem; The high efficiency aFe air filter reduces restriction through the filter, while the Dynamic Air Scoops direct more of the fresh/cool air coming into the nose grills into the intake. More cool air, less restriction, and more precious power.
This kit includes 2 stock-replacement air filter element, (2) dynamic air scoops (left and right), as well as filter restore kit for cleaning and reconditioning the re-useable filter element (a $12.49 value!).
This aFe Super Stock Filter & Intake Scoop kit fits the following BMWs:
2006+ E60 BMW M5
2006+ E63 BMW M6 coupe & Convertible
This version has an oil-free filter media for less maintenance. For the best flowing filter, with the best performance gain, we always recommend the standard aFe "Pro5R " filter (which has a blue pre-oiled filter media), but this oil-free filter flows only slightly less than the blue Pro5R style aFe filter, and requires no re-oiling after cleaning the filter. |
| Part #: 55-11271 |
| Price: $345.00 (USD) |
|
|
|
|
 |
aFe SuperStock Intake - E90/E92/E93 M3 (Filter, Intake Scoops & Restore Kit) - Pro5R
(more info)
Maxiumum Flow Pro5R Filter
Increase your V8 M3's intake flow by 54%, for a gain of 8 horsepower and 6 lb/ft of torque to the wheels, by upgrading your E90/E92/E93 M3's stock paper intake filter with an aFe High Performance airfilter and the Dynamic Air Scoops (D.A.S.) which install behind the front grills of your M3 to direct more cool air to the intake. The air scoops are a direct fit for the E9x M3, installs simply and easily using common tools (instruction included), and maintains the stock air box for a "stealth" install. Both the air scoops and the filter work in tandem; The high efficiency aFe air filter reduces restriction through the filter, while the Dynamic Air Scoops direct more of the fresh/cool air coming into the nose grills into the intake. More cool air, less restriction, and more precious power.
This kit includes 1 stock-replacement air filter element, (2) dynamic air scoops (left and right), as well as filter restore kit for cleaning and reconditioning the re-useable filter element (a $12.49 value!).
This aFe Super Stock Filter & Intake Scoop kit fits the following BMWs:
2008-2009 E90 BMW M3 sedan
2008-2009E92 BMW M3 coupe
2008-2009E93 BMW M3 convertible
This version uses aFe's highest flowing filter media, which uses a lightly oil gauze to filter out dirt and particulates, while allowing more air to flow to the intake. For the best flowing filter, with the best performance gain, we always recommend this standard aFe filter media (often called "Pro5R ", which has a blue pre-oiled filter media). We also carry this filter in the "ProDry" grey filter media, which is oil-free for only slightly less performance and no maintenance. |
| Part #: 55-11660 |
| Price: $195.00 (USD) |
|
|
|
|
|
 |
aFe SuperStock Intake - E90/E92/E93 M3 (Filter, Intake Scoops & Restore Kit) - Pro5R
(more info)
Maxiumum Flow Pro5R Filter
Increase your V8 M3's intake flow by 54%, for a gain of 8 horsepower and 6 lb/ft of torque to the wheels, by upgrading your E90/E92/E93 M3's stock paper intake filter with an aFe High Performance airfilter and the Dynamic Air Scoops (D.A.S.) which install behind the front grills of your M3 to direct more cool air to the intake. The air scoops are a direct fit for the E9x M3, installs simply and easily using common tools (instruction included), and maintains the stock air box for a "stealth" install. Both the air scoops and the filter work in tandem; The high efficiency aFe air filter reduces restriction through the filter, while the Dynamic Air Scoops direct more of the fresh/cool air coming into the nose grills into the intake. More cool air, less restriction, and more precious power.
This kit includes 1 stock-replacement air filter element, (2) dynamic air scoops (left and right), as well as filter restore kit for cleaning and reconditioning the re-useable filter element (a $12.49 value!).
This aFe Super Stock Filter & Intake Scoop kit fits the following BMWs:
2010+ E90 BMW M3 sedan
2010+ E92 BMW M3 coupe
2010+ E93 BMW M3 convertible
This version uses aFe's highest flowing filter media, which uses a lightly oil gauze to filter out dirt and particulates, while allowing more air to flow to the intake. For the best flowing filter, with the best performance gain, we always recommend this standard aFe filter media (often called "Pro5R ", which has a blue pre-oiled filter media). We also carry this filter in the "ProDry" grey filter media, which is oil-free for only slightly less performance and no maintenance. |
| Part #: 55-11880 |
| Price: $195.00 (USD) |
|
|
|
|
 |
aFe SuperStock Intake -E90/E92/E93 M3 (Filter, Intake Scoops & Restore Kit) - ProDry S
(more info)
"Oil-Free" ProDry S Filter
Increase your V8 M3's intake flow by 54%, for a gain of 8 horsepower and 6 lb/ft of torque to the wheels, by upgrading your E90/E92/E93 M3's stock paper intake filter with an aFe High Performance airfilter and the Dynamic Air Scoops (D.A.S.) which install behind the front grills of your M3 to direct more cool air to the intake. The air scoops are a direct fit for the E9x M3, installs simply and easily using common tools (instruction included), and maintains the stock air box for a "stealth" install. Both the air scoops and the filter work in tandem; The high efficiency aFe air filter reduces restriction through the filter, while the Dynamic Air Scoops direct more of the fresh/cool air coming into the nose grills into the intake. More cool air, less restriction, and more precious power.
This kit includes 1 stock-replacement air filter element, (2) dynamic air scoops (left and right), as well as filter restore kit for cleaning and reconditioning the re-useable filter element (a $12.49 value!).
This aFe Super Stock Filter & Intake Scoop kit fits the following BMWs:
2010+ E90 BMW M3 sedan
2010+ E92 BMW M3 coupe
2010+ E93 BMW M3 convertible
This version has an oil-free filter media for less maintenance. For the best flowing filter, with the best performance gain, we always recommend the standard aFe "Pro5R " filter (which has a blue pre-oiled filter media), but this oil-free filter flows only slightly less than the blue Pro5R style aFe filter, and requires no re-oiling after cleaning the filter. |
| Part #: 55-11881 |
| Price: $195.00 (USD) |
|
|
|
|
 |
aFe Throttle Body Spacer - E46 325i
(more info)
The Silver Bullet throttle body spacer creates turbulence in the air flow just prior to entry into the engine increasing horsepower, torque and improving throttle response. In recent dyno testing by aFe, this throttle body spacer produced +10hp and +14lbs. x ft. torque . The Silver Bullet throttle body spacers are constructed out of durable T-6061 billet aluminum and using a unique serrated/helix entry to create turbulence at the manifold while eliminating the annoying whistle found in other helix only throttle spacers. Great power per dollar performance.
This item fits the following BMWs:
2001-2005 E46 BMW 325i 325ci 325xi
|
| Part #: 46-31008 |
| Price: $129.00 (USD) |
|
|
|
|
 |
aFe Throttle Body Spacer - E53 X5, E60 E63 E64 E39
(more info)
Silver Bullet throttle body spacers create turbulence in the air flow at the point just prior entry into the engine increasing horsepower, torque - +5 hp, +2.5 lbs/ft torque - and improving throttle response and fuel efficiency. Silver Bullet throttle body spacers are constructed out of durable T-6061 billet aluminum and using a unique serrated/helix entry to create turbulence at the manifold while eliminating the annoying whistle found in other helix only throttle spacers. This throttle body spacer is 50-state legal (CARB E.O Number D-516-2).
This throttle body spacer fits the following BMWs:
E39 5 series BMW 540i 1997-2003
E60 5 series: BMW 545i 2004-2005
E63 E64 6 series: BMW 645ci, + Convertibles 2004-2005
E65 E66 7 series: BMW 745i, 745li 2002-2005
E53 X5: BMW X5 4.4i 4.6is 2000-2006 |
| Part #: 46-31001 |
| Price: $154.95 (USD) |
|
|
|
|
 |
aFe Throttle Body Spacer - E60 550i E63 650i E53 X5 4.8is
(more info)
Silver Bullet throttle body spacers create turbulence in the air flow at the point just prior entry into the engine increasing horsepower, torque - +10 hp, +14 lbs/ft torque - and improving throttle response and fuel efficiency. Silver Bullet throttle body spacers are constructed out of durable T-6061 billet aluminum and using a unique serrated/helix entry to create turbulence at the manifold while eliminating the annoying whistle found in other helix only throttle spacers. This throttle body spacer is 50-state legal (CARB E.O Number D-516-2). Click here for installation instructions
This item fits the following BMWs:
2004-2010 E60 BMW 550i
2004-2010 E63 BMW 650i
2002-2008 E65 BMW 750i 750li
2004-2006 E53 BMW X5 4.8is
|
| Part #: 46-31006 |
| Price: $149.95 (USD) |
|
|
|
|
 |
aFe Throttle Body Spacer - E9X 335i, E82 135i, E60 535i
(more info)
Silver Bullet throttle body spacers create turbulence in the air flow at the point just prior entry into the engine increasing horsepower, torque and improving throttle response and fuel efficiency - +6 hp, +3.5 lbs/ft torque. Silver Bullet throttle body spacers are constructed out of durable T-6061 billet aluminum and using a unique serrated/helix entry to create turbulence at the manifold while eliminating the annoying whistle found in other helix only throttle spacers. This throttle body spacer is 50-state legal (CARB E.O Number D-516-2).
Only for cars with N54 engine. Not for cars with N55 engine.
This throttle body spacer fits the following BMWs:
2008-2010 E82 BMW 135i
2010+ E82 BMW 1M Coupe
2006-2010 E90 BMW 335i 335xi 335i xDrive- Sedan
2007-2010 E92 BMW 335i 335is 335xi 335i xDrive - Coupe
2007-2010 E93 BMW 335i - Convertible
2004-2010 E60 BMW 535i 535xi 535i xDrive
|
| Part #: 46-31002 |
| Price: $154.95 (USD) |
|
|
|
|
 |
aFe Intake Kit - Pro5R - E82 128i, E90-E92 325i, 328i, 330i
(more info)
Maxiumum Flow Pro5R Filter
This intake kit replaces your restrictive factory air box. It features a 3-angle velocity stack adapter, 16-gauge powder-coated steel heat shield, trim sealed to seal out hot engine air, and a custom aFe brand cotton filter.
This version uses aFe's highest flowing filter media, which uses a lightly oil gauze to filter out dirt and particulates, while allowing more air to flow to the intake. For the best flowing filter, with the best performance gain, we always recommend this standard aFe filter media (often called "Pro5R ", which has a blue pre-oiled filter media). We also carry this filter in the "ProDry" grey filter media, which is oil-free for only slightly less performance and no maintenance.
By removing your stock intake air box, you are removing the most restrictive portion of your engine's intake system, increasing both horse power and torque, improving acceleration as well as throttle response.
This aFe intake fits the following BMWs:
2008+ E82 BMW 128i
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi - Sedan
2006-2011 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007+ E92 BMW 328i 328xi 328i xDrive - Coupe
2007+ E93 BMW 328i - Convertible
|
| Part #: 54-11012 |
| Price: $355.00 (USD) |
|
|
|
|
 |
aFe Intake Kit - Stage 2 Si - E82 128i, E90-E92 325i, 328i, 330i
(more info)
This Stage 2 Sealed Intake produces 12HP, 15LBS. x FT. of torque and outflows the factory intake by 56%. This sealed air intake system features a washable/reusable 6" conical air filter with inverted top that improves airflow for increased horsepower, torque and throttle response. The air filter is constructed with 100% polyurethane for long life and multiple cleaning cycles.The sealed housing features two auxiliary air inlet ducts for increased airflow. To finish off your underhood appearance, an attractive vacuum formed ABS plastic cover with carbon fiber finish is used to provide easy access to the filter for servicing and an aggressive look. To complete this system, a dyno tuned molded plastic intake tube with velocity stack adapter replaces the stock intake tract and directs air flow with improved volumetric efficiency for maximum intake velocity.
Vacuum Formed ABS Carbon Fiber Finish Cover - This intake is topped with a vacuum formed ABS carbon fiber finish cover that seals out hot intake air and provides an aggressive yet elegant look to your 3-series.
6" Conical Air Filter with Inverted Top - Choose either Pro Dry S performance air filter for maximum convenience or Pro5r oiled filter for maximum flow for increased horsepower and torque.
Fully Sealed Design - aFe engineers have designed a very sophisticated 2-piece sealed intake that keeps out warm underhood air and brings in cooler, outside air for a denser air intake charge.
Mounts In Factory Location - aFe has developed this intake to provide a hassle-free installation that utilizes all factory mounting locations.
This aFe intake fits the following BMWs:
2008+ E82 BMW 128i
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi - Sedan
2006-2011 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007+ E92 BMW 328i 328xi 328i xDrive - Coupe
2007+ E93 BMW 328i - Convertible
|
| Part #: 54-81012-X |
| Price: $529.00 (USD) |
|
|
|
|
|
|
aFe Pre-Filter for aFe Intake Kit # 54-10471
(more info)
Prevent water, mud and sand from congesting your air intake system with the aFe Pre-Filter. This aFe Pre-Filter slips right over your performance air filter, adding an extra layer of defense against moisture, grime and other roadway filth, extending the cleaning interval of your aFe filter. Water is repelled by the proprietary hydrophobic treatment to the Pre-Filter’s polyester fabric, and the pre-filters uniformly spaced micron holes prevent debris .005” or larger from passing through. Best of all, using the Pre-Filter does not significantly diminish your air filter’s performance—the smooth rush of oxygen keeps rolling right into your engine. Visually, the Pre-Filter blends in seamlessly with your aFe Cold Air Intake System and other components under your hood.
This particular pre-filter is custom sized to fit the following aFe Intake Kits:
54-10471 (E39 540i 1997-2003)
|
| Part #: 28-10114 |
| Price: $29.95 (USD) |
|
|
|
|
|
aFe Pre-Filter for aFe Intake Kits # 54-10171, 54-10441 & 54-10451
(more info)
Prevent water, mud and sand from congesting your air intake system with the aFe Pre-Filter. This aFe Pre-Filter slips right over your performance air filter, adding an extra layer of defense against moisture, grime and other roadway filth, extending the cleaning interval of your aFe filter. Water is repelled by the proprietary hydrophobic treatment to the Pre-Filter’s polyester fabric, and the pre-filters uniformly spaced micron holes prevent debris .005” or larger from passing through. Best of all, using the Pre-Filter does not significantly diminish your air filter’s performance—the smooth rush of oxygen keeps rolling right into your engine. Visually, the Pre-Filter blends in seamlessly with your aFe Cold Air Intake System and other components under your hood.
This particular pre-filter is custom sized to fit the following aFe Intake Kits:
54-10171 (E36 6 Cylinder)
54-10441 (E46 323i/325i/328i/Ci 99-2003)
54-10451 (E46 330i/Ci (all) & 325i/Ci 2003-2005)
|
| Part #: 28-10094 |
| Price: $29.95 (USD) |
|
|
|
|
|
aFe Pre-Filter for aFe Intake Kits # 54-10461, 54-10601, 54-10671 & 54-10681
(more info)
Prevent water, mud and sand from congesting your air intake system with the aFe Pre-Filter. This aFe Pre-Filter slips right over your performance air filter, adding an extra layer of defense against moisture, grime and other roadway filth, extending the cleaning interval of your aFe filter. Water is repelled by the proprietary hydrophobic treatment to the Pre-Filter’s polyester fabric, and the pre-filters uniformly spaced micron holes prevent debris .005” or larger from passing through. Best of all, using the Pre-Filter does not significantly diminish your air filter’s performance—the smooth rush of oxygen keeps rolling right into your engine. Visually, the Pre-Filter blends in seamlessly with your aFe Cold Air Intake System and other components under your hood.
This particular pre-filter is custom sized to fit the following aFe Intake Kits:
54-10461 (E46 M3, 2001-1006 Stage I)
54-10601 (E39 528i & 525i, 1997-2003)
54-10671 (E39 530i, 2001-2003)
54-10681 (X5 4.4 and 4.8 liter, 2001-2006)
|
| Part #: 28-10154 |
| Price: $24.95 (USD) |
|
|
|
|
 |
aFe Restore Kit
(more info)
aFe's highly refined oil is proven less likely to foul MAF sensors than other oil. It works great with aFe filters and is a great way to upgrade competitive oiled filters. aFe cleaner is specially formulated to release dirt without harming the microfibers critical to efficient filtration. It has a simple three step restoration procedure. Available in either aerosol or squeeze bottle. |
| Part #: 90-50501XX |
| Price: $11.45 (USD) |
|
|
|
|
|
aFe Cold-Air Intake Kits
