Contact YouTube Blog Twitter facebook Turner Motorsport on Instagram
1-800-280-6966
Login   |

0 item(s) in your Shopping Cart
Language:
Currency:
VAT Mode:
Get notified about money saving
specials & deals for your BMW
enter your email address
  • 18 years of BMW Tuning.
  • Award winning service.
  • 1,000's of parts in stock.
  • Quality BMW Parts only.
  • Hassle-free returns.

  • Find us on Facebook


    Save $20 off BMW Stainless Steel Brake Lines

    $20 Off Stainless Steel Brake LinesSave $20 off Stainless Steel Brake Lines!

    Stainless brake lines are a must for any track driven BMW and make a great upgrade on street cars as well. Brake lines should be replaced every few years anyway and braided stainless lines offer an additional layer of protection. Rubber brake lines deteriorate from the outside and inside. The external rubber can become stiff, crack, or get damaged by debris. The stainless braiding and Teflon inner coating help protect the outside of the line from debris. And with a stronger material the line will not expand or swell under extreme braking conditions. Stainless brake lines provide a firmer positive pedal feel under hard braking by greatly reducing the expansion that can be found in stock rubber lines. The internal of old stock rubber lines can become constricted over time even if the exterior looks normal. With a blockage or restriction you can have serious braking issues that often go mis-diagnosed as warped rotors, stuck calipers, or bad ball joints. Make sure you don't overlook your brake lines! All brake lines, rubber or stainless, should be replaced every few years and any time you replace a brake caliper.

    For accurate results, specify your year and model below.
    $20 Off Stainless Steel Brake LinesThese braided stainless brake steel lines improve the performance and safety of your BMW's braking system. They are DOT approved, coated to protect the braided stainless steel from abrasion or road-related damage and offer tremendous quality at a phenomenal price.

    Stoptech® Stainless Steel Braided Brake Lines provide a quicker, firmer, more consistent pedal response by maintaining consistent brake pressure. Additionally, stainless steel lines provide precision brake modulation, especially during threshold braking. The improvement in pedal feel is more dramatic on older vehicles where the factory rubber line may have softened and swelled due to age.

    StopTech® brake lines consist of a PTFE (commonly referred to as Teflon®) inner line that carries the brake fluid, which is then covered with a layer of stainless steel woven braid. The PTFE tube is very resistant to expansion under pressure and will not degrade from exposure to brake fluid.

    The braided stainless steel provides support for the PTFE and the weave is extremely durable against incidental impact and abrasion. Next the stainless braided hose is coated with a clear abrasion resistant PVC cover for maximum protection against chaffing and strain relief devices reinforce end fittings.

    These lines fit all 1982-1989 BMW E24 6 Series and M6. These may be used on all 633CSi, 635CSi, and M6 that are a model year 1982, 1983, 1984, 1985, 1986, 1987, 1988, or 1989.

    Part #: PLB533106D-E24
    Regular Price: $124.95 (USD)
     Sale Price: $104.95 (USD) 
    Quantity:   
    $20 Off Stainless Steel Brake LinesThese braided stainless brake steel lines improve the performance and safety of your BMW's braking system. Tthese braided stainless brake steel lines improve the performance and safety of your BMW's braking system. They are DOT approved, coated to protect the braided stainless steel from abrasion or road-related damage and offer tremendous quality at a phenomenal price.

    Stoptech® Stainless Steel Braided Brake Lines provide a quicker, firmer, more consistent pedal response by maintaining consistent brake pressure. Additionally, stainless steel lines provide precision brake modulation, especially during threshold braking. The improvement in pedal feel is more dramatic on older vehicles where the factory rubber line may have softened and swelled due to age.

    StopTech® brake lines consist of a PTFE (commonly referred to as Teflon®) inner line that carries the brake fluid, which is then covered with a layer of stainless steel woven braid. The PTFE tube is very resistant to expansion under pressure and will not degrade from exposure to brake fluid.

    The braided stainless steel provides support for the PTFE and the weave is extremely durable against incidental impact and abrasion. Next the stainless braided hose is coated with a clear abrasion resistant PVC cover for maximum protection against chaffing and strain relief devices reinforce end fittings.



    These lines fit all 1982-1988 BMW 5 Series (E28) and M5. These may be used on all 533i, 528e, 535i, 535is and M5 that are a model year 1982, 1983, 1984, 1985, 1986, 1987, or 1988.

    .
    Part #: PLB533106D-E28
    Regular Price: $124.95 (USD)
     Sale Price: $104.95 (USD) 
    Quantity:   
    $20 Off Stainless Steel Brake LinesThese braided stainless brake steel lines improve the performance and safety of your BMW's braking system. They are DOT approved, coated to protect the braided stainless steel from abrasion or road-related damage and offer tremendous quality at a phenomenal price.

    Stoptech® Stainless Steel Braided Brake Lines provide a quicker, firmer, more consistent pedal response by maintaining consistent brake pressure. Additionally, stainless steel lines provide precision brake modulation, especially during threshold braking. The improvement in pedal feel is more dramatic on older vehicles where the factory rubber line may have softened and swelled due to age.

    StopTech® brake lines consist of a PTFE (commonly referred to as Teflon®) inner line that carries the brake fluid, which is then covered with a layer of stainless steel woven braid. The PTFE tube is very resistant to expansion under pressure and will not degrade from exposure to brake fluid.

    The braided stainless steel provides support for the PTFE and the weave is extremely durable against incidental impact and abrasion. Next the stainless braided hose is coated with a clear abrasion resistant PVC cover for maximum protection against chaffing and strain relief devices reinforce end fittings.

    These lines fit all 1984-1991 3 series (E30) BMWs **EXCEPT 325ix and 1984-1985 318i **. This kit fits all 325, 325e, 325es, 325i, 325is, 325ic, 318is, and M3.
    Part #: PLB323106D
    Regular Price: $124.95 (USD)
     Sale Price: $104.95 (USD) 
    Quantity:   
    $20 Off Stainless Steel Brake LinesThese braided stainless brake steel lines improve the performance and safety of your BMW's braking system. They are DOT approved, coated to protect the braided stainless steel from abrasion or road-related damage and offer tremendous quality at a phenomenal price.

    Stoptech® Stainless Steel Braided Brake Lines provide a quicker, firmer, more consistent pedal response by maintaining consistent brake pressure. Additionally, stainless steel lines provide precision brake modulation, especially during threshold braking. The improvement in pedal feel is more dramatic on older vehicles where the factory rubber line may have softened and swelled due to age.

    StopTech® brake lines consist of a PTFE (commonly referred to as Teflon®) inner line that carries the brake fluid, which is then covered with a layer of stainless steel woven braid. The PTFE tube is very resistant to expansion under pressure and will not degrade from exposure to brake fluid.

    The braided stainless steel provides support for the PTFE and the weave is extremely durable against incidental impact and abrasion. Next the stainless braided hose is coated with a clear abrasion resistant PVC cover for maximum protection against chaffing and strain relief devices reinforce end fittings.

    These lines fit all 1988-1994 BMW 7 Series (E32). They will fit all 735i, 735il, 740i, 740il, 750i, and 750il that are a model year 1988, 1989, 1990, 1991, 1992, 1993, or 1994.

    Part #: PLB533106D-E32
    Regular Price: $124.95 (USD)
     Sale Price: $104.95 (USD) 
    Quantity:   
    $20 Off Stainless Steel Brake LinesThese braided stainless brake steel lines improve the performance and safety of your BMW's braking system. They are DOT approved, coated to protect the braided stainless steel from abrasion or road-related damage and offer tremendous quality at a phenomenal price.

    Stoptech® Stainless Steel Braided Brake Lines provide a quicker, firmer, more consistent pedal response by maintaining consistent brake pressure. Additionally, stainless steel lines provide precision brake modulation, especially during threshold braking. The improvement in pedal feel is more dramatic on older vehicles where the factory rubber line may have softened and swelled due to age.

    StopTech® brake lines consist of a PTFE (commonly referred to as Teflon®) inner line that carries the brake fluid, which is then covered with a layer of stainless steel woven braid. The PTFE tube is very resistant to expansion under pressure and will not degrade from exposure to brake fluid.

    The braided stainless steel provides support for the PTFE and the weave is extremely durable against incidental impact and abrasion. Next the stainless braided hose is coated with a clear abrasion resistant PVC cover for maximum protection against chaffing and strain relief devices reinforce end fittings.

    These lines fit all 1989-1995 BMW 5 Series (E34). They will fit all 525i, 530i, 530i, 540i, and M5 models (sedan and wagon) that are a model year 1989, 1990, 1991, 1992, 1993, 1994 or 1995.

    Part #: PLB533106D-E34
    Regular Price: $124.95 (USD)
     Sale Price: $104.95 (USD) 
    Quantity:   
    $20 Off Stainless Steel Brake LinesThese braided stainless brake steel lines improve the performance and safety of your BMW's braking system. They are DOT approved, coated to protect the braided stainless steel from abrasion or road-related damage and offer tremendous quality at a phenomenal price.

    Stoptech® Stainless Steel Braided Brake Lines provide a quicker, firmer, more consistent pedal response by maintaining consistent brake pressure. Additionally, stainless steel lines provide precision brake modulation, especially during threshold braking. The improvement in pedal feel is more dramatic on older vehicles where the factory rubber line may have softened and swelled due to age.

    StopTech® brake lines consist of a PTFE (commonly referred to as Teflon®) inner line that carries the brake fluid, which is then covered with a layer of stainless steel woven braid. The PTFE tube is very resistant to expansion under pressure and will not degrade from exposure to brake fluid.

    The braided stainless steel provides support for the PTFE and the weave is extremely durable against incidental impact and abrasion. Next the stainless braided hose is coated with a clear abrasion resistant PVC cover for maximum protection against chaffing and strain relief devices reinforce end fittings.

    These lines fit all 1992-1998 E36 3 series BMWs. Please note that both 323is/ic and 328i/is/ic produced 12/1997 and later use a 4 piece kit, versus all other e36 which use a 6 piece kit. Please choose your applicable E36 model below.

    This item fits the following BMWs:
    1992-1998 E36 BMW 318i 318is 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
    Part #: PLB53310XX
    Regular Price: $124.95 (USD)
     Sale Price: $104.95 (USD) 
    $20 Off Stainless Steel Brake Lines318ti 6pc. Stainless Steel Brake Line Set - These lines are DOT approved and also feature a clear plastic outside coating.

    Stoptech® Stainless Steel Braided Brake Lines provide a quicker, firmer, more consistent pedal response by maintaining consistent brake pressure. Additionally, stainless steel lines provide precision brake modulation, especially during threshold braking. The improvement in pedal feel is more dramatic on older vehicles where the factory rubber line may have softened and swelled due to age.

    StopTech® brake lines consist of a PTFE (commonly referred to as Teflon®) inner line that carries the brake fluid, which is then covered with a layer of stainless steel woven braid. The PTFE tube is very resistant to expansion under pressure and will not degrade from exposure to brake fluid.

    The braided stainless steel provides support for the PTFE and the weave is extremely durable against incidental impact and abrasion. Next the stainless braided hose is coated with a clear abrasion resistant PVC cover for maximum protection against chaffing and strain relief devices reinforce end fittings.

    This item fits the following BMWs:
    1994-1998 E36 BMW 318ti
    Part #: PLB318TI
    Regular Price: $124.95 (USD)
     Sale Price: $104.95 (USD) 
    Quantity:   
    $20 Off Stainless Steel Brake LinesE39 5 Series Stainless Steel Line Set - These lines are DOT approved and also feature a clear plastic outside protective coating.

    Stoptech® Stainless Steel Braided Brake Lines provide a quicker, firmer, more consistent pedal response by maintaining consistent brake pressure. Additionally, stainless steel lines provide precision brake modulation, especially during threshold braking. The improvement in pedal feel is more dramatic on older vehicles where the factory rubber line may have softened and swelled due to age.

    StopTech® brake lines consist of a PTFE (commonly referred to as Teflon®) inner line that carries the brake fluid, which is then covered with a layer of stainless steel woven braid. The PTFE tube is very resistant to expansion under pressure and will not degrade from exposure to brake fluid.

    The braided stainless steel provides support for the PTFE and the weave is extremely durable against incidental impact and abrasion. Next the stainless braided hose is coated with a clear abrasion resistant PVC cover for maximum protection against chaffing and strain relief devices reinforce end fittings.

    This item fits the following BMWs:
    1997-2003 E39 BMW 525i 528i 530i 540i M5
    Sedan only. Not for Wagons.
    Part #: PLBE39
    Regular Price: $124.95 (USD)
     Sale Price: $104.95 (USD) 
    Quantity:   
    $20 Off Stainless Steel Brake LinesThese braided stainless brake steel lines improve the performance and safety of your BMW's braking system. They are DOT approved, and coated to protect the braided stainless steel from abrasion or road-related damage and offer tremendous quality at a phenomenal price.

    Stoptech® Stainless Steel Braided Brake Lines provide a quicker, firmer, more consistent pedal response by maintaining consistent brake pressure. Additionally, stainless steel lines provide precision brake modulation, especially during threshold braking. The improvement in pedal feel is more dramatic on older vehicles where the factory rubber line may have softened and swelled due to age.

    StopTech® brake lines consist of a PTFE (commonly referred to as Teflon®) inner line that carries the brake fluid, which is then covered with a layer of stainless steel woven braid. The PTFE tube is very resistant to expansion under pressure and will not degrade from exposure to brake fluid.

    The braided stainless steel provides support for the PTFE and the weave is extremely durable against incidental impact and abrasion. Next the stainless braided hose is coated with a clear abrasion resistant PVC cover for maximum protection against chaffing and strain relief devices reinforce end fittings.

    This item fits the following BMWs:
    1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
    Part #: PLBE46M3DCOAT
    Regular Price: $124.95 (USD)
     Sale Price: $104.95 (USD) 
    Quantity:   
    $20 Off Stainless Steel Brake Lines As used on the Lime Rock M3
    These braided stainless steel lines for the 2008 and newer E9X M3 improve the performance and safety of your M3's braking system. They are DOT and German TUV approved, feature a resilient coating to protect against wear and chafing, and offer tremendous quality at a phenomenal price. These brake lines are made by renowned brake experts, Stoptech, and are ready for the rigors of daily street driving, driving schools, autocross and race events. They fit all 2008, 2009, 2010 (and newer) BMW M3 V8. Each set includes 4 brake lines - 1 for each caliper - as well as pre-installed grommets on the front for ideal fit.

    Stoptech® Stainless Steel Braided Brake Lines provide a quicker, firmer, more consistent pedal response by maintaining consistent brake pressure. Additionally, stainless steel lines provide precision brake modulation, especially during threshold braking. The improvement in pedal feel is more dramatic on older vehicles where the factory rubber line may have softened and swelled due to age.

    StopTech® brake lines consist of a PTFE (commonly referred to as Teflon®) inner line that carries the brake fluid, which is then covered with a layer of stainless steel woven braid. The PTFE tube is very resistant to expansion under pressure and will not degrade from exposure to brake fluid.

    The braided stainless steel provides support for the PTFE and the weave is extremely durable against incidental impact and abrasion. Next the stainless braided hose is coated with a clear abrasion resistant PVC cover for maximum protection against chaffing and strain relief devices reinforce end fittings.

    These stainless brake lines fit the following BMWs:
    2011 E82 BMW 1M Coupe
    2008-2013 E90 M3 sedan
    2008-2013 E92 M3 coupe
    2008-2013 E93 M3 convertible
    Part #: PLBE9XM3
    Regular Price: $124.95 (USD)
     Sale Price: $104.95 (USD) 
    Quantity:   
    $20 Off Stainless Steel Brake LinesThese braided stainless brake steel lines improve the performance and safety of your BMW's braking system. They meet DOT requirements and are coated to protect the braided stainless steel from abrasion or road-related damage and offer tremendous quality at a phenomenal price.

    Part #: PLBF30F32
    Regular Price: $99.00 (USD)
     Sale Price: $79.00 (USD) 
    Quantity:   
    $20 Off Stainless Steel Brake LinesFour piece, M Coupe / Roadster Stainless Steel Line Set - DOT Approved and feature a clear plastic outside coating.

    Stoptech® Stainless Steel Braided Brake Lines provide a quicker, firmer, more consistent pedal response by maintaining consistent brake pressure. Additionally, stainless steel lines provide precision brake modulation, especially during threshold braking. The improvement in pedal feel is more dramatic on older vehicles where the factory rubber line may have softened and swelled due to age.

    StopTech® brake lines consist of a PTFE (commonly referred to as Teflon®) inner line that carries the brake fluid, which is then covered with a layer of stainless steel woven braid. The PTFE tube is very resistant to expansion under pressure and will not degrade from exposure to brake fluid.

    The braided stainless steel provides support for the PTFE and the weave is extremely durable against incidental impact and abrasion. Next the stainless braided hose is coated with a clear abrasion resistant PVC cover for maximum protection against chaffing and strain relief devices reinforce end fittings.

    This item fits the following BMWs:
    1998-2002 Z3 BMW M Roadster M Coupe
    Part #: PLBMCOUPE
    Regular Price: $124.95 (USD)
     Sale Price: $104.95 (USD) 
    Quantity:   
    $20 Off Stainless Steel Brake Lines As Used on our Project Mini Cooper S
    MINI Cooper / MINI Cooper S braided Stainless Steel 4 Pc. Brake Line Set - These lines are DOT approved and also feature a clear plastic outside coating. Replace those soft, inferior rubber brake hoses!

    Stoptech® Stainless Steel Braided Brake Lines provide a quicker, firmer, more consistent pedal response by maintaining consistent brake pressure. Additionally, stainless steel lines provide precision brake modulation, especially during threshold braking. The improvement in pedal feel is more dramatic on older vehicles where the factory rubber line may have softened and swelled due to age.

    StopTech® brake lines consist of a PTFE (commonly referred to as Teflon®) inner line that carries the brake fluid, which is then covered with a layer of stainless steel woven braid. The PTFE tube is very resistant to expansion under pressure and will not degrade from exposure to brake fluid.

    The braided stainless steel provides support for the PTFE and the weave is extremely durable against incidental impact and abrasion. Next the stainless braided hose is coated with a clear abrasion resistant PVC cover for maximum protection against chaffing and strain relief devices reinforce end fittings.

    These brake lines fit all 2002 to 2007 MINI Cooper and Cooper S. As there was a change to the braking system midway through the 2003 model year, you must select your build date below.
    Part #: PLBMINI-E
    Regular Price: $124.95 (USD)
     Sale Price: $104.95 (USD) 
    $20 Off Stainless Steel Brake LinesThese stainless steel brake lines improve pedal feel and reduce the amount of time between applied pedal pressure and actual deceleration by preventing expansion, which stock rubber flex lines allow. This provides a quicker pedal response, and allows the driver to maintain consistent brake pressure and precision brake modulation.. Kit consists of part #'s 950.34001 and # 950.34523. The brake lines consist of a Teflon® inner line that is covered with a layer of stainless steel woven braid. The Teflon tube is very resistant to expansion under pressure and will not degrade from exposure to brake fluid. The stainless steel braid provides support for the Teflon and the weave is extremely durable against incidental impact and abrasion. These brake lines feature a Clear Abrasion Resistant Cover for maximum protection against chaffing. They are DOT approved, 100% tested to a pressure of 4500 psi, and offer tremendous quality at a phenomenal price.

    Stoptech® Stainless Steel Braided Brake Lines provide a quicker, firmer, more consistent pedal response by maintaining consistent brake pressure. Additionally, stainless steel lines provide precision brake modulation, especially during threshold braking. The improvement in pedal feel is more dramatic on older vehicles where the factory rubber line may have softened and swelled due to age.

    StopTech® brake lines consist of a PTFE (commonly referred to as Teflon®) inner line that carries the brake fluid, which is then covered with a layer of stainless steel woven braid. The PTFE tube is very resistant to expansion under pressure and will not degrade from exposure to brake fluid.

    The braided stainless steel provides support for the PTFE and the weave is extremely durable against incidental impact and abrasion. Next the stainless braided hose is coated with a clear abrasion resistant PVC cover for maximum protection against chaffing and strain relief devices reinforce end fittings.

    This item fits the following BMWs:
    2006-2008 Z4 BMW Z4 M Roadster M Coupe
    Part #: PLBZ4M
    Regular Price: $124.95 (USD)
     Sale Price: $104.95 (USD) 
    Quantity:   
    $20 Off Stainless Steel Brake LinesThese braided stainless steel lines for the BMW E60 M5 and E63 M6 improve the performance and safety of your BMW's braking system. They are DOT and German TUV approved, feature a resilient coating to protect against wear and chafing, and offer tremendous quality at a phenomenal price. These brake lines are made by renowned brake experts, Stoptech, and are ready for the rigors of daily street driving, driving schools, autocross and race events. Each set includes 4 brake lines - 2 front and 2 rear - as well as pre-installed grommets on the front for ideal fit.

    Stoptech® Stainless Steel Braided Brake Lines provide a quicker, firmer, more consistent pedal response by maintaining consistent brake pressure. Additionally, stainless steel lines provide precision brake modulation, especially during threshold braking. The improvement in pedal feel is more dramatic on older vehicles where the factory rubber line may have softened and swelled due to age.

    StopTech® brake lines consist of a PTFE (commonly referred to as Teflon®) inner line that carries the brake fluid, which is then covered with a layer of stainless steel woven braid. The PTFE tube is very resistant to expansion under pressure and will not degrade from exposure to brake fluid.

    The braided stainless steel provides support for the PTFE and the weave is extremely durable against incidental impact and abrasion. Next the stainless braided hose is coated with a clear abrasion resistant PVC cover for maximum protection against chaffing and strain relief devices reinforce end fittings.

    These stainless brake lines fit the following BMWs:
    2004-2010 E60 BMW 525i 530i 528i 535i 545i 550i M5
    2004-2010 E63 BMW 645ci 650i M6
    Part #: PLBE60M5
    Regular Price: $124.95 (USD)
     Sale Price: $104.95 (USD) 
    Quantity:   
    $20 Off Stainless Steel Brake LinesThese braided stainless steel lines for the 2007-2011 E9X 335xi improve the performance and safety of your BMW's braking system. They are DOT and German TUV approved, feature a resilient coating to protect against wear and chafing, and offer tremendous quality at a phenomenal price. These brake lines are made by renowned brake experts, Stoptech, and are ready for the rigors of daily street driving, driving schools, autocross and race events. Each set includes 4 brake lines - 2 front and 2 rear - as well as pre-installed grommets on the front for ideal fit.

    Stoptech® Stainless Steel Braided Brake Lines provide a quicker, firmer, more consistent pedal response by maintaining consistent brake pressure. Additionally, stainless steel lines provide precision brake modulation, especially during threshold braking. The improvement in pedal feel is more dramatic on older vehicles where the factory rubber line may have softened and swelled due to age.

    StopTech® brake lines consist of a PTFE (commonly referred to as Teflon®) inner line that carries the brake fluid, which is then covered with a layer of stainless steel woven braid. The PTFE tube is very resistant to expansion under pressure and will not degrade from exposure to brake fluid.

    The braided stainless steel provides support for the PTFE and the weave is extremely durable against incidental impact and abrasion. Next the stainless braided hose is coated with a clear abrasion resistant PVC cover for maximum protection against chaffing and strain relief devices reinforce end fittings.

    These stainless brake lines fit the following BMWs:
    2007-2011 E90 BMW 335xi 335i xDrive - Sedan
    2007-2013 E92 BMW 335xi 335i xDrive - Coupe
    Part #: PLBE9X335XI
    Regular Price: $124.95 (USD)
     Sale Price: $104.95 (USD) 
    Quantity:   
    $20 Off Stainless Steel Brake Lines As Used on Project E92 335i
    These braided stainless steel lines for the 2006+ E9X 3 Series and 2008+ E82 1 series improve the performance and safety of your BMW's braking system. They are DOT and German TUV approved, feature a resilient coating to protect against wear and chafing, and offer tremendous quality at a phenomenal price. These brake lines are made by renowned brake experts, Stoptech, and are ready for the rigors of daily street driving, driving schools, autocross and race events. Each set includes 6 brake lines as well as pre-installed grommets on the front for ideal fit.

    Stoptech® Stainless Steel Braided Brake Lines provide a quicker, firmer, more consistent pedal response by maintaining consistent brake pressure. Additionally, stainless steel lines provide precision brake modulation, especially during threshold braking. The improvement in pedal feel is more dramatic on older vehicles where the factory rubber line may have softened and swelled due to age.

    StopTech® brake lines consist of a PTFE (commonly referred to as Teflon®) inner line that carries the brake fluid, which is then covered with a layer of stainless steel woven braid. The PTFE tube is very resistant to expansion under pressure and will not degrade from exposure to brake fluid.

    The braided stainless steel provides support for the PTFE and the weave is extremely durable against incidental impact and abrasion. Next the stainless braided hose is coated with a clear abrasion resistant PVC cover for maximum protection against chaffing and strain relief devices reinforce end fittings.

    These stainless brake lines fit the following BMWs:
    2006+ E90 E92 E93 BMW 325i 328i 330i 335d 335i (Not Xi all will drive models)
    2008+ E82 E88 BMW 128i 135i
    Part #: PLBE9X335i
    Regular Price: $124.95 (USD)
     Sale Price: $104.95 (USD) 
    Quantity:   
    $20 Off Stainless Steel Brake LinesZ3 6 Pc. Stainless Steel Brake Line Set for Z3 (Lines do not fit MZ3).

    Stoptech® Stainless Steel Braided Brake Lines provide a quicker, firmer, more consistent pedal response by maintaining consistent brake pressure. Additionally, stainless steel lines provide precision brake modulation, especially during threshold braking. The improvement in pedal feel is more dramatic on older vehicles where the factory rubber line may have softened and swelled due to age.

    StopTech® brake lines consist of a PTFE (commonly referred to as Teflon®) inner line that carries the brake fluid, which is then covered with a layer of stainless steel woven braid. The PTFE tube is very resistant to expansion under pressure and will not degrade from exposure to brake fluid.

    The braided stainless steel provides support for the PTFE and the weave is extremely durable against incidental impact and abrasion. Next the stainless braided hose is coated with a clear abrasion resistant PVC cover for maximum protection against chaffing and strain relief devices reinforce end fittings.

    These brake lines fit all non-M Z3's, including Z3 1.9, Z3 2.3, Z3 2.5, Z3 2.8 and Z3 3.0.

    Now available with clear protective coating! This special coating helps protect the braided stainless steel from abrasion or road-related damage.
    Part #: PLBZ396DCOAT
    Regular Price: $124.95 (USD)
     Sale Price: $104.95 (USD) 
    Quantity:   
    $20 Off Stainless Steel Brake LinesZ4 Stainless Steel Brake Line Set, Teflon plastic coating and DOT Approved.

    Stoptech® Stainless Steel Braided Brake Lines provide a quicker, firmer, more consistent pedal response by maintaining consistent brake pressure. Additionally, stainless steel lines provide precision brake modulation, especially during threshold braking. The improvement in pedal feel is more dramatic on older vehicles where the factory rubber line may have softened and swelled due to age.

    StopTech® brake lines consist of a PTFE (commonly referred to as Teflon®) inner line that carries the brake fluid, which is then covered with a layer of stainless steel woven braid. The PTFE tube is very resistant to expansion under pressure and will not degrade from exposure to brake fluid.

    The braided stainless steel provides support for the PTFE and the weave is extremely durable against incidental impact and abrasion. Next the stainless braided hose is coated with a clear abrasion resistant PVC cover for maximum protection against chaffing and strain relief devices reinforce end fittings.

    Applications:
    2003-2009 Z4 2.5/3.0/3.0Si (not Z4 M models)
    Part #: ST851334500 / ST851405502
    Regular Price: $159.95 (USD)
     Sale Price: $139.95 (USD) 
    Quantity: