Select Vehicle
BMW
Mini
Create an account to be able to build Wish Lists.
Please ensure your correct model is selected
Enhance the power and torque of your BMW effortlessly with a Turner Performance Chip. These chips, meticulously dyno-tuned by the BMW tuning legend Jim Conforti, are the perfect solution for optimizing high-octane (91+) pump gas, resulting in enhanced mid-range torque and high-RPM horsepower. To maximize these improvements, the chip raises the rev limit and meticulously fine-tunes fuel and spark maps to elevate your BMW's performance beyond factory standards. Installing a Turner Performance Chip comes with no downsides – each chip is engineered to safely boost performance while retaining driveability and responsiveness. Detailed instructions are included, and installation is typically a one-hour task for an enthusiast with basic hand tools.
With over two decades of experience, Turner Motorsport and Jim Conforti are experts in bringing your BMW to life through software tuning. Unlike generic eBay chips, Turner Performance Chips are crafted with rigorously tested and carefully designed fuel & spark maps. This ensures that your BMW achieves outstanding performance without risking engine damage or driveability issues. Since 1995, Jim Conforti has dedicated himself to fine-tuning the BMW driving experience, uncovering additional power and torque, and enhancing throttle response. With a remarkable track record of over 10,000 units sold, Jim Conforti is rightfully recognized as the leader in BMW chip tuning. Don't be fooled by imitations – your BMW deserves the very best.
The BMW M50 engine is renowned for its bulletproof reliability, and it's widely known that it has the potential for significantly more power than it leaves the factory with. Jim Conforti has tailored this Turner Conforti Performance Chip to harness the M50's strengths without compromising reliability. This results in additional high-RPM horsepower and mid-range torque, alongside improved throttle response and smoother operation, providing a comprehensive performance upgrade for your BMW.
Key Performance Gains:
The package includes detailed installation instructions to ensure a smooth and hassle-free setup process. Turner stands behind their product with a 30-day money-back guarantee on this performance chip, supported by ECS Tuning.
| Required Vehicle Info | |
| All | Confirm the ECU is a Bosch 0 261 203 413 with a silver label |
If you have an M3 engine and want to use the 21.5 lb/hr injectors (pink top, stock on the 2.8 M52 and 3.2 S52) we have the perfect chip for you. Instead of changing to the smaller 17lb injectors or upgrading to the full 24lb, you can use the injectors from the stock 3.2 M3. They are in-between 17lb and 24lb, allowing a little more fuel to compensate for intake and/or exhaust upgrades.Perfect for running headers with an intake! There are plenty of surplus 21.5lb injectors out there (we sometimes have them too, check out Used Parts section).
It's usually not necessary to use bigger injectors but this gives you another option in your engine planning. This software covers almost all of the popular bolt-on upgrades, including the larger HFM (Euro or 540). Choose the mods/upgrades from the list below.Turner Performance Chips provide the ultimate in performance advantage! Adding a performance chip to your BMW is the easiest and most cost effective way of increasing BMW power, torque, and performance with NO DOWNSIDES. Through years of BMW performance tuning, we are able to maximize power and torque gains for 91 octane fuel used in North America. By making changes in the ignition and fuel maps of the DME we are able to optimize performance with no side effects or compromises. Other changes will make your BMW smoother and more responsive than when it left the factory. Our chips have a lifetime warranty and a 30-day satisfaction guarantee. If for any reason you are not fully satisfied with the increase in power and overall drivability you can return the chip to Turner Motorsport for a full refund. Chips are supplied with detailed instructions and are user-installed in about an hour. See below for specific information that we may need from your BMW model.
Note: we will not be offering this software for use with cams. More aggressive camshafts require the use of the Bosch 24lb injectors. The 21.5lb injectors are maxed out when used with cams.
Additional Options:
This S52 OBD-I Performance Chip applies to the following BMWs:
Any S52 engine converted to OBD-I electronics
1985-1992 E30 S52 conversion
1989-1994 E34 S52 conversion
1995* E34 S52 conversion
1992-1994 E36 S52 conversion
1995-1999* E36 S52 conversion
* - 1995-1999 model years may have EWS-II activated. Pay special attention to production dates and ECU numbers.
BMW E36 Shark Injector Performance Software is the ultimate upgrade for boosting the power and torque of your BMW. This performance software, meticulously dyno-tuned by BMW expert Jim Conforti, is engineered to enhance the potential of high-octane (91+) pump gas, significantly increasing mid-range torque and high-RPM horsepower. The Shark Injector also features an increased rev limit, fine-tuned fuel and spark maps, and optimized performance, ensuring that your BMW exceeds its factory capabilities. The installation is straightforward, typically taking just an hour, and maintains drivability while improving responsiveness.
Note: The Shark Injector software is specifically designed for NORTH AMERICAN SPEC BMWs and is not compatible with EURO-SPEC models.
Enhance your BMW's power and torque effortlessly with the Turner Performance Chip, the ultimate answer to performance prayers. Dyno-tuned by BMW legend Jim Conforti, these chips are crafted to optimize high-octane (91+) pump gas, boosting mid-range torque and high-RPM horsepower. The rev limit is raised, and fuel and spark maps are meticulously fine-tuned to elevate your BMW's performance without compromising reliability.
Experience a horsepower gain of +20 @ 6,000 RPM, a torque gain of +13 @ 4,500 RPM, and a new rev limit of 7,000 RPM. Trust in Turner's confidence with a 30-day money-back guarantee serviced by ECS Tuning.
The E36 M3 benefits greatly from a TMS Performance Chip. Although premium fuel is recommended by BMW, the car is not optimized for it. Significant horsepower and torque gains can be had by switching to a Turner Chip and using 91+ octane fuel. Tuned specially for the E36 M3 on the dyno with Bosch expert Jim Conforti, this chip provides a smooth power delivery from low RPM up all the way up to redline. Conforti achieved this by altering the fuel and spark maps along with the cam timing to take full advantage of premium fuel. The result is a big boost in power, more usable torque, and a smoother-running engine. The rev limit is raised and the top speed limiter is removed. There are NO downsides to installing a TMS Performance Chip; it is FREE, easy-to-install horsepower.
Turner Performance Chips provide the ultimate in performance advantage! Adding a performance chip to your BMW is the easiest and most cost effective way of increasing BMW power, torque, and performance with NO DOWNSIDES. Through years of BMW performance tuning, we are able to maximize power and torque gains for 91 octane fuel used in North America. By making changes in the ignition and fuel maps of the DME we are able to optimize performance with no side effects or compromises. Other changes will make your BMW smoother and more responsive than when it left the factory. Our chips have a lifetime warranty and a 30-day satisfaction guarantee. If for any reason you are not fully satisfied with the increase in power and overall drivability you can return the chip to Turner Motorsport for a full refund. Chips are supplied with detailed instructions and are user-installed in about an hour. See below for specific information that we may need from your BMW model.
You can also use this chip in E30 S50/S52 engine conversions but we recommend using it with the Speed Sensor Delete feature unless you have the speed sensor wired correctly from the dash to the ECU.
Horsepower Gain Up To:+19 @ 5,000 RPM
Torque Gain Up To:+16 @ 3,500 RPM
New Rev Limit*7,000
E36 M3 95Production date (MM/YY)
* Transmission Note: our chip's increase the engine rev limit set in the DME. The computer for the automatic transmission has its own limiter that restricts engine RPM to preserve the automatic transmission internals. Our chip will still increase horsepower and torque with the automatic but the stock rev limit will remain.
This item fits the following BMWs:
1995 E36 BMW M3
| Horsepower Gain: | +11 @ 5,500 RPM |
| Torque Gain: | +19 @ 3,600 RPM |
| New Rev Limit | 6,900 |
| Required Vehicle Info | |
| E36 318i/is/ic 92-94 | Bosch ECU part number, beginning with "0 261" |
| Transmission: manual or automatic | |
| E36 318i/is/ic 95 | Bosch ECU part number, beginning with "0 261" |
| Production date (MM/YY) | |
| Transmission: manual or automatic | |
Horsepower Gain Up To: +22 @ 6,000 RPM
Torque Gain Up To: +20 @ 4,000 RPM
New Rev Limit: 7,000
If you're looking for a significant bump in power you need not look any further than a TMS Performance Chip. Designed to maximize the advantage of premium fuel, Performance Chips safely alter the fuel and timing maps which results in more power and a smoother engine. These chips were tuned by Jim Conforti on the dyno with fantastic results. What you feel is more power starting at 3500 RPM and continuing up to the new rev limit of 7000. There is no downside - only an awakened engine and a car with new life!
Performance software is the key to unlocking the power that BMW left on the table. For the US market the factory software is set for 87 octane fuel. But the engine is capable of producing so much more! We make adjustments to the fuel, ignition, and camshaft timing data at part throttle and full throttle to take advantage of premium 91+ octane fuel. We dial in the settings so that more power is made at all RPM. What you'll notice is more power and torque at wide open throttle and even when driving around town. The engine will run smoother with better throttle response and less hesitation. We keep the factory safeguards in place so there is no long term engine damage or negative side effects. It's not just gaining power back - it's better than when it left the factory!
We're also able to tune for all of the popular M50 engine upgrades -
Required Vehicle Info:
1993-1994 E34 525i: no additional information required
1995 E34 525i: production date (MM/YY)
1993-1994 E36 325i: no additional information required
1995 E36 325i: production date (MM/YY)
This item fits the following BMWs:
1993-1995 E36 BMW 325i 325is 325ic
1993-1995 E34 BMW 525i
Unleash the true potential of your BMW effortlessly with the Turner Performance Chip—the ultimate solution for adding power and torque. Dyno-tuned by BMW tuning legend Jim Conforti, these chips are meticulously designed to maximize the benefits of high-octane (91+) pump gas, elevating mid-range torque and high-RPM horsepower. Experience an optimized driving performance as the chip raises the rev limit and fine-tunes fuel and spark maps, ensuring your BMW outperforms its factory configuration. There's no compromise with the Turner Performance Chip; each chip is engineered for safe performance improvement, maintaining driveability, and enhancing responsiveness. Detailed instructions accompany every chip, making installation a straightforward process, typically taking just an hour for enthusiasts using hand tools.
Turner Motorsport and Jim Conforti, with over 20 years of experience, redefine your BMW's performance through meticulous software tuning. Unlike eBay chips, Turner Performance Chips feature extensively tested fuel & spark maps, maximizing your BMW's potential without risking engine damage or sacrificing driveability. Since 1995, Jim Conforti has been a driving force in fine-tuning the BMW experience, finding more power and torque while enhancing throttle response. With over 10,000 units sold, Jim Conforti is hailed as the leader in BMW chip tuning—don't settle for imitators; your BMW deserves the best.
The E36 M3, a pinnacle of performance and luxury, takes a leap with the Turner Conforti Performance Chip. Addressing the US-market E36 M3's power disparity with its European counterpart, this chip delivers impressive gains in both horsepower and torque where you need it most.
Turner is so confident in the transformative power, torque, and overall performance of this product that they offer a 30-day money-back guarantee, serviced by ECS Tuning.
Performance software is a must-have upgrade on your BMW and you won't find an easier and better software solution than the Shark Injector. Developed by BMW tuning expert Jim Conforti, this device plugs into the car's diagnostic port and flashes new performance files into your car's engine computer (ECU). There's no removal of the ECU and shipping, no cables, no laptop required - only a battery charger! Installation takes just a few minutes and your engine will perform like never before!
The M52/S52 performance software was developed on the dyno to create maximum power and torque using premium 91+ octane fuel while maintaining BMW reliability and smoothness. The software makes changes to the ECU's maps and algorithms for fuel injection, ignition timing, VANOS and camshaft movement, and transitional fueling. We modify the maps for part throttle and full throttle so you get better response and more torque at all RPM. We also raise the rev limit to 7,000 and remove the top speed limiter. By fine tuning these maps we've been able to improve the M52/S52 engine beyond what BMW did by making more power and torque and a smoother-running engine.
The Shark Injector plugs into the diagnostic port under the hood of the E36. With the battery charger supplying power, press the Upgrade button and within minutes the ECU is reflashed with the new performance tune. No other software product on the market comes close to how easy it is to install. You can use the Restore button to re-install the stock BMW software at any time. Detailed instructions are included. Other tuners require you to remove the ECU and ship it to them or use a laptop to read and write a new file. The Shark Injector is ready to install right out of the box! A planned future upgrade will allow you to use the USB port to load different performance files.
1996-1999 E36 323/328 (M52 engine) Performance Software Peak Gains
HP Gain Up To:+15 @ 6,400 RPM
Torque Gain Up To: +9 @ 4,500 RPM
New Rev Limit:7,000 RPM
+10 @ 4,000 RPM
E36 M3 dyno chartHP Gain:+12 @ 6,000 RPM
Torque Gain:
New Rev Limit:7,000 RPM
Read what others are saying!
(click to expand)
Anonymous, 323is: "I purchased my first Shark for my 1999 - 323is (e36). I installed it during work today and had a GREAT time driving home on I495. My wife actually had to call me to find out what was taking so long. She didn't know I was having the most fun I've had since I first purchased my BMW! I would definitely recommend this new product to all the 323is owners."
Gary, 328i: "I own a 1997 328i and recently installed the Conforti Shark Injector and Intake Kit, as well as a Borla exhaust and a B & M sport shift kit. I am very impressed with the amount of performance I was able to gain."
Manny, E36 M3: "Just "sharked" my E36 M3. All I can say is WOW. The car has never run so well. The idle and the engine overall is so smoooooth! The throttle is very responsive, power is right there. Very Nice! Never putting it back to stock! Just wanted to say job well done, and thanks."
Josh, E36 M3: "Just got done putting on my Supersprint exhaust, Shark injector and my intake, wow what a difference. Thank you guys for the performance, I will be a lifetime customer."
/>
Shark Injector Installation Instructions
(click to expand)
Shark Injector installation instructions
A capable battery charger is required for the installation. The charger provides backup power supply to the regular car battery during installation. It must be capable of holding a continuous 10amp charge for the full installation (15-20 minutes).
The minimum octane fuel for this software is 91.
Shark Injector FAQ
(click to expand)
This item fits the following BMWs:
1996-1999 E36 BMW 323is 323ic 328i 328is 328ic M3
Enhance your BMW's performance effortlessly with the Turner Performance Chip—the ultimate solution for adding power and torque. Dyno-tuned by BMW legend Jim Conforti, these chips optimize high-octane (91+) pump gas, delivering heightened mid-range torque and high-RPM horsepower. Elevate your BMW's performance without compromise—the chip raises the rev limit and fine-tunes fuel and spark maps, ensuring superior performance compared to its factory configuration. There's no downside to installing a Turner Performance Chip; each chip is meticulously designed to safely improve performance while maintaining driveability and enhancing responsiveness. Detailed instructions make installation a breeze, typically taking just an hour for enthusiasts using hand tools.
Turner Motorsport and Jim Conforti, with over 20 years of experience, redefine your BMW's performance through meticulous software tuning. Unlike eBay chips, Turner Performance Chips feature extensively tested fuel & spark maps, maximizing your BMW's potential without risking engine damage or sacrificing driveability. Since 1995, Jim Conforti has been a driving force in fine-tuning the BMW experience, finding more power and torque while enhancing throttle response. With over 10,000 units sold, Jim Conforti is hailed as the leader in BMW chip tuning—don't settle for imitators; your BMW deserves the best.
BMW's M42 four-cylinder engine, known for its innovation, receives a performance boost with the Turner Conforti Performance Chip. Featuring dual overhead camshafts, four valves per cylinder, and weight-saving techniques, the M42 is a masterpiece. Jim Conforti's precise tuning unlocks additional high RPM horsepower and mid-range torque, breathing new life into your M42 for an exhilarating performance.
Turner is so confident in the transformative power, torque, and overall performance of this product that they offer a 30-day money-back guarantee, serviced by ECS Tuning.
Unlock the full potential of your BMW effortlessly with the Turner Performance Chip—the ultimate solution for power and torque enhancement. Crafted by BMW tuning luminary Jim Conforti, these chips are meticulously designed to optimize high-octane (91+) pump gas, elevating mid-range torque and high-RPM horsepower. By raising the rev limit and fine-tuning fuel and spark maps, the Turner Performance Chip ensures your BMW outperforms its factory settings without compromising safety, driveability, or responsiveness. Each chip is shipped with detailed instructions, facilitating easy installation within an hour using basic hand tools, perfect for the enthusiast.
Benefit from over 20 years of expertise from Turner Motorsport and Jim Conforti, pioneers in making BMWs come alive through precision software tuning. In contrast to eBay chips, Turner Performance Chips boast extensively tested fuel & spark maps, extracting maximum performance without jeopardizing engine health or driveability. Since 1995, Jim Conforti has honed the BMW driving experience, uncovering additional power and torque while enhancing throttle response. With over 10,000 units sold, Jim Conforti stands as the unrivaled leader in BMW chip tuning—don't settle for imitations; your BMW deserves the best.
The E36 M3, a fusion of raw performance and luxury, receives a transformative upgrade with the Turner Conforti Performance Chip. Addressing the US-market E36 M3's power deficit compared to its European counterpart, this chip delivers remarkable gains in horsepower and torque where it matters most in the powerband.
Turner is so confident in the unparalleled power, torque, and overall performance delivered by this product that they offer a 30-day money-back guarantee, serviced by ECS Tuning.
You may be able to upgrade the Shark Injector file to another version to better meet your tuning needs. Depending on the model we may have better tunes for things such as intakes, larger air sensors, camshafts, headers, and others. For a small fee the current Shark Injector tune can be removed and a new file added instead (the original Shark file you were using would no longer be available). To do this, we need the car restored to stock settings with the current Shark Injector and then returned to us (updating via USB is not yet available). Sharks that were not Restored to stock cannot be upgraded and the unit will be returned to you (at your expense). We also perform other work on the Shark Injector while it is here, including diagnostic tests and re-packaging with the most current instructions. The Shark that you get back is virtually new and ready to be reinstalled!
To get started, review the catalog of current Shark Injector files for one that better matches your tuning spec.
1. Enter the new tuning file in the form below. Include any other relevant information.
2. Click the Update Price or Add To Cart button.
3. Complete the online transaction with your address and payment information.
4. A Turner Motorsport sales rep will contact you after your order has been submitted. Do not send in your Shark Injector until someone has contacted you with a reference number and return shipping address.
Turn-around time for upgrades is typically the same day we receive it. UPS Ground is the normal return shipping method unless you specify faster shipping on your order.
Helpful Links:
A Turner Performance Chip for the 1992 E36 325i is an absolute MUST-HAVE performance upgrade. This chip was developed on the dyno to increase horsepower and torque from low RPM all the way up to the new 7000 RPM rev limit. Engine management expert Jim Conforti tuned the fuel and spark mapping to maximize output when used with 91+ octane fuel. More power, a smoother engine, and better response are the results. Bang for the buck, this is hands-down the best upgrade to do. The rev limiter is raised to 7000 RPM and the top speed limiter has been deleted.
Turner Performance Chips provide the ultimate in performance advantage! Adding a performance chip to your BMW is the easiest and most cost effective way of increasing BMW power, torque, and performance with NO DOWNSIDES. Through years of BMW performance tuning, we are able to maximize power and torque gains for 91 octane fuel used in North America. By making changes in the ignition and fuel maps of the DME we are able to optimize performance with no side effects or compromises. Other changes will make your BMW smoother and more responsive than when it left the factory. Our chips have a lifetime warranty and a 30-day satisfaction guarantee. If for any reason you are not fully satisfied with the increase in power and overall drivability you can return the chip to Turner Motorsport for a full refund. Chips are supplied with detailed instructions and are user-installed in about an hour. See below for specific information that we may need from your BMW model.
Horsepower Gain Up To:+20 @ 6,000 RPM
Torque Gain Up To:+13 @ 4,500 RPM
New Rev Limit7,000
E36 325i/is 92Bosch ECU part number, beginning with "0 261"
This performance chip fits the following BMWs:
1992 E36 BMW 325i 325is
Revitalize your BMW effortlessly with the Turner Performance Chip, the ultimate solution for boosting power and torque. Crafted by BMW tuning legend Jim Conforti, these chips are meticulously designed to optimize high-octane (91+) pump gas, enhancing mid-range torque and high-RPM horsepower. The rev limit is elevated, and fuel and spark maps are fine-tuned, ensuring your BMW outperforms its factory specifications. No compromises – each Turner Performance Chip is engineered for safe performance improvement while maintaining driveability and responsiveness. Shipped with detailed instructions, enthusiasts can typically install these chips within an hour using hand tools.
Turner Performance Chips lead the BMW chip tuning industry, ensuring your BMW gets the performance it deserves.
Stage 3+ Performance Software for E36 M3 (M50 Manifold + Cam Kit)
Conforti Shark Injector performance software tuned for the an awesome OBD2 package: M50 manifold, Schrick camshafts, "24lb" injectors, Porsche 3.5" HFM, and intake. This software makes full use of the benefits of the M50 manifold when used with cams and the HFM/intake. Without the software, you're not getting the full effect of these upgrades in the upper rev range. The stock software -- or a regular Shark Injector -- is tuned for low-end torque using the stock manifold and cams. It's like a marathon runner in a 40-yard dash -- he'll put in a good effort but won't be the quickest! Special attention was paid to the low-end and mid-range too so that torque was not lost with the M50 manifold.
With this software you will notice more top end power, a broader torque band, and a smoother running engine. The rev limit is raised to 7000 RPM with the top speed limiter removed. Works with 91 or higher octane fuel.
Required:
"24lb" injectors (actually around 26lb injectors when used at the S52's 3.5 bar of fuel pressure). You must confirm the injector flow-rate at 3.5 bar before using this software. If the injectors were not purchased from us, we may as for the Bosch part number on your injectors.
Porsche 809 3.5" HFM (0 280 217 809) (TMS/Porsche HFM works best) with intake. Note: this will not work with a Euro HFM, 540 HFM, or Dinan HFM. Our software is programmed and written specifically for the Porsche 809 HFM! If you did not purchase the HFM Kit from us, we may ask you for the Bosch part number from your HFM.
Schrick camshafts
M50 intake manifold
Shark Injector Installation Instructions
(click to expand)
Shark Injector installation instructions
A capable battery charger is required for the installation. The charger provides backup power supply to the regular car battery during installation. It must be capable of holding a continuous 10amp charge for the full installation (15-20 minutes).
The minimum octane fuel for this software is 91.
Shark Injector FAQ
(click to expand)
This item fits the following BMWs:
1996-1999 E36 BMW M3
Unleash the true potential of your BMW with the Turner Performance Chip—the ultimate solution for adding power and torque. Expertly dyno-tuned by BMW legend Jim Conforti, these chips optimize high-octane (91+) pump gas, delivering enhanced mid-range torque and high-RPM horsepower. Elevate your BMW's performance without compromise—each chip raises the rev limit and fine-tunes fuel and spark maps, ensuring your vehicle outperforms its factory configuration. Experience the power boost while maintaining driveability and responsiveness, thanks to the carefully crafted design. With detailed instructions, installation is a breeze, typically taking just an hour for enthusiasts using hand tools.
Turner Motorsport and Jim Conforti, with over two decades of experience, redefine your BMW's performance through meticulous software tuning. Unlike eBay chips, Turner Performance Chips feature extensively tested fuel & spark maps, maximizing your BMW's potential without risking engine damage or sacrificing driveability. Since 1995, Jim Conforti has been a driving force in fine-tuning the BMW experience, finding more power and torque while enhancing throttle response. With over 10,000 units sold, Jim Conforti is hailed as the leader in BMW chip tuning—don't settle for imitators; your BMW deserves the best.
The BMW M42 four-cylinder engine, renowned for its innovation, receives a performance boost with the Turner Conforti Performance Chip. Featuring dual overhead camshafts, four valves per cylinder, and weight-saving techniques, the M42 is a masterpiece. Jim Conforti's precise tuning unlocks additional high RPM horsepower and mid-range torque, injecting vitality into your M42 for an exhilarating performance.
Turner is so confident in the transformative power, torque, and overall performance of this product that they offer a 30-day money-back guarantee, serviced by ECS Tuning.
Stage 4+ Performance Software for E36 M3, MZ3 (M50 Manifold + Cams + Headers Kit)
Conforti Shark Injector performance software tuned for the an awesome OBD2 package: M50 manifold, Schrick camshafts, performance headers, "24lb" injectors, Porsche 809 3.5" HFM, and intake. This software makes full use of the benefits of the M50 manifold when used with cams and the HFM/intake. Without the software, you're not getting the full effect of these upgrades in the upper rev range. The stock software -- or a regular Shark Injector -- is tuned for low-end torque using the stock manifold and cams. It's like a marathon runner in a 40-yard dash -- he'll put in a good effort but won't be the quickest! Special attention was paid to the low-end andmid-range too so that torque was not lost with the M50 manifold.
With this software you will notice more top end power, a broader torque band, and a smoother running engine. The rev limit is raised to 7000 RPM with the top speed limiter removed. Works with 91 or higher octane fuel.
Required:
"24lb" injectors (actually around 26lb injectors when used at the S52's 3.5 bar of fuel pressure). You must confirm the injector flow-rate at 3.5 bar before using this software. If the injectors were not purchased from us, we may as for the Bosch part number on your injectors.
Porsche 809 3.5" HFM (0 280 217 809) (TMS/Porsche HFM works best) with intake. Note: this will not work with a Euro HFM, 540 HFM, or Dinan HFM. Our software is programmed and written specifically for the Porsche 809 HFM! If you did not purchase the HFM Kit from us, we may ask you for the Bosch part number from your HFM.
Schrick camshafts
Performance Headers (TMS Shorty Headers or similar)
M50 manifold
Shark Injector Installation Instructions
(click to expand)
Shark Injector installation instructions
A capable battery charger is required for the installation. The charger provides backup power supply to the regular car battery during installation. It must be capable of holding a continuous 10amp charge for the full installation (15-20 minutes).
The minimum octane fuel for this software is 91.
Shark Injector FAQ
(click to expand)
This item fits the following BMWs:
1996-1999 E36 BMW M3
Unlock the full potential of your BMW with the Turner Performance Chip, the easiest way to boost power and torque. These chips, expertly dyno-tuned by BMW legend Jim Conforti, are specially crafted to optimize high-octane (91+) pump gas, enhancing mid-range torque and high-RPM horsepower. They raise the rev limit and fine-tune fuel and spark maps to take your BMW's performance to the next level. The Turner Performance Chip is a safe and effective upgrade that maintains driveability and responsiveness. Each chip comes with detailed installation instructions, making it a one-hour project for automotive enthusiasts.
Turner Motorsport and Jim Conforti bring over 20 years of experience to the table, breathing new life into your BMW with software tuning. Unlike generic eBay chips, Turner Performance Chips are designed with extensively tested and carefully crafted fuel & spark maps, ensuring top performance without engine risks or driveability issues. Since 1995, Jim Conforti has dedicated himself to fine-tuning the BMW driving experience, extracting more power and torque and improving throttle response. With a remarkable track record of over 10,000 units sold, Jim Conforti is the unquestioned leader in BMW chip tuning. Don't settle for imitations – your BMW deserves nothing but the best.
BMW's M50 engine is renowned for its bulletproof reliability, and it's well known that it has the potential for significantly more power than it leaves the factory with. Jim Conforti has fine-tuned the Turner Conforti Performance Chip to harness the M50's strengths without compromising reliability, resulting in more high-RPM horsepower and mid-range torque. Experience improved throttle response and smoother operation for a comprehensive performance upgrade.
Key Performance Gains:
Please note that tuning for popular aftermarket upgrades, such as a lightened flywheel, intake, and exhaust, is available. Contact your sales representative for more details.
The package includes installation instructions to ensure a smooth and hassle-free setup process. Turner is so confident in your satisfaction with the power, torque, and overall performance improvements that they offer a 30-day money-back guarantee on this product, serviced by ECS Tuning.
Experience the easiest way to boost power and torque in your BMW with the Turner Performance Chip. This chip is expertly tuned by renowned BMW specialist Jim Conforti, delivering peak performance on high-octane (91+) pump gas. It excels in enhancing mid-range torque and high-RPM horsepower while keeping your BMW's safety and driveability intact.
Turner Motorsport and Jim Conforti combine over two decades of experience to enhance your BMW's performance through software tuning. Unlike eBay chips, Turner Performance Chips use extensively tested fuel and spark maps, ensuring optimal performance without risking engine damage or reducing driveability. With over 10,000 units sold, Jim Conforti is a renowned leader in BMW chip tuning.
This Turner Conforti Performance Chip is specifically tuned for BMW's M50 engine, known for its reliability and untapped power potential. With a focus on high-RPM horsepower and mid-range torque, this chip also enhances throttle response and overall engine smoothness, offering a comprehensive performance upgrade for your BMW.
Please note that tuning options are available for popular aftermarket upgrades such as a lightened flywheel, intake, and exhaust. Contact your sales representative for details. Turner Motorsport stands behind the quality and performance of this product, offering a 30-day money-back guarantee, supported by ECS Tuning.
Performance software is a must-have upgrade on your BMW and you won't find an easier and better software solution than the Shark Injector. Developed by BMW tuning expert Jim Conforti, this device plugs into the car's diagnostic port and flashes new performance files into your car's engine computer (ECU). This particular file includes Stage 1 engine tuning (fuel, ignition, timing upgrades) with EWS-delete programming. There's no removal of the ECU and shipping, no cables, no laptop required - only a battery charger! Installation takes just a few minutes and your engine will perform like never before!
The M52/S52 performance software was developed on the dyno to create maximum power and torque using premium 91+ octane fuel while maintaining BMW reliability and smoothness. The software makes changes to the ECU's maps and algorithms for fuel injection, ignition timing, VANOS and camshaft movement, and transitional fueling. We modify the maps for part throttle and full throttle so you get better response and more torque at all RPM. We also raise the rev limit to 7,000 and remove the top speed limiter. By fine tuning these maps we've been able to improve the S52 engine beyond what BMW did by making more power and torque and a smoother-running engine.
The programming for EWS delete will allow you to use a spare ECU to run the engine. If your original ECU fails, and you find yourself buying a used ECU, you won't have to tow the car to the dealer to have the ECU synced to the car's EWS system. This is also the perfect software solution if you installed an S52 engine in your E36 323/328 - just plug in the M3 ECU and flash with this Shark Injector. This Stage 1 file will bypass the EWS code and give you all of the benefits of our Stage 1 tune.
The Shark Injector plugs into the diagnostic port under the hood of the E36. With the battery charger supplying power, press the Upgrade button and within minutes the ECU is reflashed with the new performance tune. No other software product on the market comes close to how easy it is to install. You can use the Restore button to re-install the stock BMW software at any time. Detailed instructions are included. Other tuners require you to remove the ECU and ship it to them or use a laptop to read and write a new file. The Shark Injector is ready to install right out of the box! A planned future upgrade will allow you to use the USB port to load different performance files.
1996-1999 E36 M3 Performance Software Peak Gains
E36 M3 dyno chartHP Gain Up To:+12 @ 6,000 RPM
Torque Gain Up To:+10 @ 4,000 RPM
New Rev Limit:7,000 RPM
Read what others are saying!
(click to expand)
Manny, E36 M3: "Just "sharked" my E36 M3. All I can say is WOW. The car has never run so well. The idle and the engine overall is so smoooooth! The throttle is very responsive, power is right there. Very Nice! Never putting it back to stock! Just wanted to say job well done, and thanks."
Josh, E36 M3: "Just got done putting on my Supersprint exhaust, Shark injector and my intake, wow what a difference. Thank you guys for the performance, I will be a lifetime customer."
Shark Injector Installation Instructions
(click to expand)
Shark Injector installation instructions
A capable battery charger is required for the installation. The charger provides backup power supply to the regular car battery during installation. It must be capable of holding a continuous 10amp charge for the full installation (15-20 minutes).
The minimum octane fuel for this software is 91.
Shark Injector FAQ
(click to expand)
This item fits the following BMWs:
1996-1999 E36 BMW M3
1998-2000 Z3 BMWZ3 M Roadster M Coupe
Unleash the full potential of your BMW with the Turner Performance Chip—an answer to your prayers for effortless power and torque enhancement. Engineered by BMW tuning legend Jim Conforti, these chips are meticulously crafted to maximize high-octane (91+) pump gas, elevating mid-range torque and high-RPM horsepower. The rev limit is heightened, and fuel and spark maps are finely tuned, ensuring your BMW outperforms its factory capabilities without compromise. Turner Performance Chips are designed for safe performance improvement, maintaining driveability and enhancing responsiveness. Shipped with detailed instructions, enthusiasts can typically install these chips within an hour using hand tools.
Turner Performance Chips, backed by Turner Motorsport and Jim Conforti's decades of expertise, lead the BMW chip tuning industry—because your BMW deserves the best.
Enhance your BMW's performance effortlessly with the Turner Performance Chip—the ultimate solution for adding power and torque. Engineered by BMW tuning maestro Jim Conforti, these chips are tailored to optimize high-octane (91+) pump gas, delivering exceptional mid-range torque and high-RPM horsepower. Discover the benefits of the Turner Performance Chip:
Turn your BMW into a powerhouse with the Turner Performance Chip—the trusted choice for uncompromised performance and reliability.
If you're seeking an effortless way to enhance your BMW's power and torque, the Shark Injector is your answer. Meticulously dyno-tuned by BMW tuning legend Jim Conforti, this cutting-edge software is designed to harness the full potential of high-octane (91+) pump gas, resulting in impressive mid-range torque and high-RPM horsepower. Explore the standout features of this remarkable product:
Shark Injector software is ONLY compatible on NORTH AMERICAN SPEC BMWs. It is not designed to, nor will operate properly on EURO-SPEC BMWs
Enhance the power and torque of your BMW effortlessly with the Turner Performance Chip—the ultimate solution tuned by BMW legend Jim Conforti. Designed to maximize high-octane (91+) pump gas, these chips elevate mid-range torque and high-RPM horsepower. Explore the benefits:
Turner Motorsport and Jim Conforti redefine BMW tuning with carefully crafted fuel & spark maps, delivering unparalleled performance. Don't settle for imitations—choose the leader in BMW chip tuning for your deserving BMW.
Unleash the full potential of your BMW's power and torque effortlessly with the Shark Injector, your ultimate solution for a performance boost. Expertly dyno-tuned by BMW legend Jim Conforti, this software is meticulously crafted for high-octane (91+) pump gas, prioritizing mid-range torque and high-RPM horsepower. Explore the benefits:
Revitalize your BMW's performance hassle-free with Shark Injector's expertly crafted software.
Elevate your BMW's performance effortlessly with the Shark Injector—the ultimate solution for adding power and torque. Engineered by BMW tuning legend Jim Conforti, this software is optimized for high-octane (91+) pump gas, enhancing mid-range torque and high-RPM horsepower. Unleash the potential of your BMW with these features:
Installation is a breeze—connect a battery charger, plug in your Shark Injector, and start the process. This innovative solution replaces stock software, storing original data for future use. When the LED turns from red to green, your BMW is ready to deliver enhanced performance.
Discover the effortless path to boosting power and torque for your BMW with the Turner Performance Chip—a true answer to your needs. These chips have been expertly dyno-tuned by BMW tuning legend Jim Conforti to harness the full potential of high-octane (91+) pump gas. By optimizing mid-range torque and high-RPM horsepower, the Turner Performance Chip ensures your BMW outperforms its factory settings. The rev limit is raised, and fuel and spark maps are meticulously fine-tuned, all designed to enhance your BMW's performance without compromise. Every chip comes complete with detailed instructions, making installation a breeze, typically taking just an hour for an enthusiastic DIYer with basic hand tools.
Turner Motorsport and Jim Conforti bring over two decades of expertise to breathe new life into your BMW through software tuning. Unlike inferior eBay chips, Turner Performance Chips are engineered with extensively tested, carefully designed fuel and spark maps to deliver top-tier performance without compromising engine integrity or driveability. Since 1995, Jim Conforti has been utilizing his expertise to elevate the BMW driving experience, extracting additional power and torque while enhancing throttle response. With over 10,000 units sold, Jim Conforti is unquestionably the leader in BMW chip tuning. Protect your BMW from imitations—it deserves the very best.
The E36 M3 is a remarkable machine, seamlessly combining raw, razor's edge performance with luxury and comfort. For years, the US-market E36 M3 has been scrutinized for its power output compared to its European counterpart. The Turner Conforti Performance Chip is the solution, delivering remarkable gains in both horsepower and torque within the powerband's most useful segments.
Turner is so confident in the undeniable power, torque, and overall performance improvement that they offer a 30-day money-back guarantee, serviced by ECS Tuning.
Stage 3 Performance Software for E36 M3, MZ3 (HFM/Cam Kit) (stock S52 manifold)
Conforti Shark Injector performance software tuned for our Stage 3 OBD2 package: Schrick camshafts, "24lb" injectors, Porsche 3.5" HFM, and intake. This software is tuned around the stock S52 intake manifold. For keeping the most useable torque we recommend using the stock manifold over the M50 part.
With this software you will notice more top end power, a broader torque band, and a smoother running engine. The rev limit is raised to 7000 RPM with the top speed limiter removed. Works with 91 or higher octane fuel.
Required:
"24lb" injectors (actually around 26lb injectors when used at the S52's 3.5 bar of fuel pressure). You must confirm the injector flow-rate at 3.5 bar before using this software. If the injectors were not purchased from us, we may as for the Bosch part number on your injectors.
Porsche 809 3.5" HFM (0 280 217 809) (TMS/Porsche HFM works best) with intake. Note: this will not work with a Euro HFM, 540 HFM, or Dinan HFM. Our software is programmed and written specifically for the Porsche 809 HFM! If you did not purchase the HFM Kit from us, we may ask you for the Bosch part number from your HFM.
Schrick camshafts
Shark Injector Installation Instructions
(click to expand)
Shark Injector installation instructions
A capable battery charger is required for the installation. The charger provides backup power supply to the regular car battery during installation. It must be capable of holding a continuous 10amp charge for the full installation (15-20 minutes).
The minimum octane fuel for this software is 91.
Shark Injector FAQ
(click to expand)
This item fits the following BMWs:
1996-1999 E36 BMW M3
Unleash the full potential of your BMW effortlessly with the Turner Performance Chip—an answer to your power and torque aspirations. Dyno-tuned by BMW legend Jim Conforti, these chips are optimized for high-octane (91+) pump gas, delivering enhanced mid-range torque and high-RPM horsepower. Revel in the benefits:
Turner Motorsport and Jim Conforti redefine BMW tuning, ensuring your vehicle deserves the best. The E36 M3, often criticized for power differences, finds its true potential with the Turner Conforti Performance Chip.
Stage 2 Performance Software for E36 M3, MZ3 (Turner-Porsche 3.5" HFM, larger injectors)
Conforti Shark Injector performance software tuned for our Stage 2 OBD2 package: larger fuel injectors, Porsche 3.5" HFM, and intake. This is the correct software to use with the desireable Porsche 803/809 HFM on the OBD2 E36 M3. You should not be running a larger HFM without software and injectors - you're in danger of running too lean! On the dyno we found that the stock fuel injectors were not capable of providing enough fuel to keep up with the increased airflow. This "leaner" fuel mixture was dangerous as it could lead to hotter combustion temps and burning or melting of critical components. With the correct HFM, larger injectors, and this software you will be back to running correct air-fuel ratios.
With this software you will notice more top end power, a broader torque band, and a smoother running engine. The rev limit is raised to 7000 RPM with the top speed limiter removed. Works with 91 or higher octane fuel.
Required:
"24lb" injectors (actually around 26lb injectors when used at the S52's 3.5 bar of fuel pressure). You must confirm the injector flow-rate at 3.5 bar before using this software. If the injectors were not purchased from us, we may as for the Bosch part number on your injectors.
Porsche 809 3.5" HFM (0 280 217 809) (TMS/Porsche HFM works best) with intake. Note: this will not work with a Euro HFM, 540 HFM, or Dinan HFM. Our software is programmed and written specifically for the Porsche 809 HFM! If you did not purchase the HFM Kit from us, we may ask you for the Bosch part number from your HFM.
Shark Injector Installation Instructions
(click to expand)
Shark Injector installation instructions
A capable battery charger is required for the installation. The charger provides backup power supply to the regular car battery during installation. It must be capable of holding a continuous 10amp charge for the full installation (15-20 minutes).
The minimum octane fuel for this software is 91.
Shark Injector FAQ
(click to expand)
This item fits the following BMWs:
1996-1999 E36 BMW M3
Stage 4 Performance Software for E36 M3 (Turner HFM + Cams + Headers Kit)
Conforti Shark Injector performance software tuned for our Stage 4 OBD2 package: Schrick camshafts, performance headers, "24lb" injectors, Porsche 809 3.5" HFM, and intake. This software is tuned around the stock S52 intake manifold. For keeping the most useable torque we recommend using the stock manifold over the M50 part.
With this software you will notice more top end power, a broader torque band, and a smoother running engine. The rev limit is raised to 7000 RPM with the top speed limiter removed. Works with 91 or higher octane fuel.
Required:
"24lb" injectors (actually around 26lb injectors when used at the S52's 3.5 bar of fuel pressure). You must confirm the injector flow-rate at 3.5 bar before using this software. If the injectors were not purchased from us, we may as for the Bosch part number on your injectors.
Porsche 809 3.5" HFM (0 280 217 809) (TMS/Porsche HFM works best) with intake. Note: this will not work with a Euro HFM, 540 HFM, or Dinan HFM. Our software is programmed and written specifically for the Porsche 809 HFM! If you did not purchase the HFM Kit from us, we may ask you for the Bosch part number from your HFM.
Schrick camshafts
Performance Headers (TMS Shorty Headers or similar)
Shark Injector Installation Instructions
(click to expand)
Shark Injector installation instructions
A capable battery charger is required for the installation. The charger provides backup power supply to the regular car battery during installation. It must be capable of holding a continuous 10amp charge for the full installation (15-20 minutes).
The minimum octane fuel for this software is 91.
Shark Injector FAQ
(click to expand)
This item fits the following BMWs:
1996-1999 E36 BMW M3