BMW Performance Chips & Software
BMW Exterior & Aerodynamics
BMW Brake Parts
BMW Differential & Clutch
BMW Engine Parts
BMW Intake Kits
BMW Exhaust Parts
BMW Interior Parts
BMW Lighting Parts
BMW Suspension Parts
BMW Wheels & Spacers
BMW Race Parts
BMW Maintenace Parts & Tools
BMW Clothing
BMW Used Parts
BMW Parts Specials
BMW Tech Tips & Info
Useful links:
BMW Chassis Codes
BMW Warranty Info
TMS E46 M3 Performance Sway Bar Kit
TMS E46 M3 Performance Sway Bar Kit
Part #:
33355TMS
Applications:
2001 - 2006 (E46)
Overview
The Turner Motorsport sway bars for the E46 M3 were designed to provide better overall balance and performance than the stock anti-roll bars. With these bars you can greatly reduce bodyroll and decrease the understeering effects of a staggered wheel setup. They are adjustable in the front (3-position) and the rear (2-position) to fine tune the handling for both the street and the track. The TMS anti-roll bars are sized at 30mm in the front and 25mm in the rear (+4 and +3.5mm, respectively). H&R's exclusive urethane / Teflon bushings are included. The Teflon inner lining requires no lubrication or maintenance so you won’t have to put up with annoying squeaks and annual greasing work. These bars are crafted from a special 50CrV4 spring steel that is both stronger and more resilient than competitive sway bars. They have been shot peened and heat treated, and feature precision forged ends. We feel that these are the best bars on the market for the E46 M3 - check out our race-winning M3s in the Koni Challenge and SCCA T2 classes - they use these sway bars!
Fitment
These bars fit in the stock locations using the existing brackets and links. Adjustable links are not required but strongly recommended if the car is lowered or if you have coil overs. We can also include new factory links with the hardware pressed in for a quicker install. This is especially helpful in the rear where the hardware can be tricky. To avoid pre-loading the bar, it is best to leave one side un-done until the car is lowered to the ground.
Setup
The bars are 3-way adjustable in the front and 2-way in the rear. Just about any driver can find an ideal setup for the type of driving they are doing. The sway bar becomes stiffer in the hole(s) furthest from the end of the bar. We would generally recommend starting out with the front bar set to the middle setting and the rear bar positioned on the softest setting (closest to the end of the bar).
Click Here for Independent Reviews of this Kit!
Price: $399.95
Product Options
Choose your link options:
No thanks, I will use my original links.
new stock front links (Add $63.90)
new stock rear links with bar hardware installed (Add $41.66)
new stock front and rear links (Add $105.56)
adjustable front links (Add $155.99)
adjustable rear links (Add $83.61)
adjustable front and rear links (Add $239.60)
Quantity:
Enter your zip code to to figure out shipping charges for this item:
UPS Ground
UPS 2nd Day Air
UPS 3 Day Select
shipping to zip
approximately $0.
People who like this product also like these products:
TMS Adjustable Front Swaybar End Links (Pair)
E36/E46 Rear Adjustable Length Sway Bar End Links (Pair)
Copyright © 2010 Turner Motorsport Inc.
info@turnermotorsport.com
www.allshocks.com
www.allsprings.com
Terms and Conditions
Privacy Policy