Turner Motorsport BMW Parts click for details Turner Motorsport


 
Bookmark and Share
  Useful links:
 BMW Chassis Codes
BMW Warranty Info

 
Products for 2008- BMW M3 Sedan (4 door):
Black Front Grills / Blackout Nose Grills

click to enlarge
 E92 Carbon Fiber Front Grills (Pair) for all E92 3 Series Coupe & E90/E92 M3
Ditch those boring and overstated chrome front kidney grills, and get a darker more aggressive look on your 2007+ 3 series coupe or 2008+ E90/E92 M3. These direct replacement grills are made of high quality twill weave carbon fiber, and install in minutes. These are not your typical (and inferior) immitation carbon fiber grills which bubble up over time -- these grills are beautifully wrapped in REAL carbon fiber, which is treated with a special UV protected clear coat to protect them from the elements. You wouldn't want anything less on your BMW. The weave even matches the carbon fiber roof equipped E92 M3 coupes!

These carbon fiber front grills fit the following BMWs:
2007+ E92 3 Series Coupe - 328i, 328xi, 335i & 335xi
2007+ E93 3 Series Convertible 328i & 335i
2008+ E90/E92/E93 M3 (fits M3 coupe, M3 sedan & M3 convertible)
Applications: 2007-- 328i 328xi 335i 335xi M3 (E90 E92)
Part #: BM-0178-P
Price:   $199.00
Sale Price: $179.00
Savings $20.00
Email a Friend

click to enlarge
 E90/E92/E93 M3 Black Fender Side Grill Trim Set
There is very little chrome on the outside of the sleek E9X M3 coupe -- the front nose (or kidney) grills and the side fender trims. This pair of trim pieces allows you to eliminate the chrome strip on both fenders, and give a stealth matte black blacked-out look that makes a subtle yet noticeable improvement to the exterior of your M3.

These black fender grill trims simply replace the stock chrome pieces. They are high quality, use a genuine BMW //M3 emblem, and install in place of the stock pieces in minutes. They fit all 2008+ E90 M3, E92 M3 coupes and E93 M3 convertibles, including 2008, 2009, 2010 and newer models.
Applications: 2008-2010 M3 (E90 E92 E93)
Part #: BM-0208
Price:   $129.00
Sale Price: $89.00
Savings $40.00
Email a Friend
People who like this product also like these products:
  • Black Center Grills (Pair) for All E92 3 Series Coupe & E90/E92 M3
    		•

    click to enlarge
    		 E90/E92/E93 M3 Carbon Fiber Fender Side Grill Trim Set
    Carbon fiber is the ultimate in lightweight and stylish performance trim. Many of the E92 M3 coupes even came with full carbon fiber roofs. These carbon fiber side grills are a perfect way to get another nice carbon fiber touch, and eliminate the stock chrome strips on the fenders.

    These side trims work on all 2008, 2009, 2010 and newer M3 (coupe, sedan, and convertible) and install in place of the stock chrome pieces. They are made of high quality carbon fiber, and come complete with Genuine BMW ///M3 emblems. Installation only takes a few minutes, and the look and fit perfectly -- just as if they were factory parts (but at a lower cost than what BMW would charge).

    Applications: 2008-2010 M3 (E90 E92 E93)
    Part #: BM-0210
    Price:   $199.00

    Email a Friend
    People who like this product also like these products:
  • E92 Carbon Fiber Front Grills (Pair) for all E92 3 Series Coupe & E90/E92 M3
  • E90/E92/E93 M3 Black Fender Side Grill Trim Set
  • Black Center Grills (Pair) for All E92 3 Series Coupe & E90/E92 M3
    		•

    click to enlarge
    		 Black Center Grills (Pair) for All E92 3 Series Coupe & E90/E92 M3
    These direct replacement center grills let you eliminate the stock chrome kidney / center grills, feature perfect fit and beautiful finish, and give you a darker more aggressive look. These girlls fit all 2007 E92 3 series Coupe & Convertible, and ALL 2008+ E90/E92/E93 M3 (coupe, sedan, & convertible). Kit includes two blacked out grills with matte black finish.

    Made from impact resistant long life ABS polymer, these grills are precision crafted for a perfect OEM fit. Unlike some competitors blacked-out grills which have a shiny finish that give off a cheap look and feel, these black grills feature a high quality matte finish reminiscent of genuine BMW parts.

    These black center grills fit the following BMWs:
    2007+ E92 3 Series Coupe including 335i, 335xi, 328i, 328xi 2 door coupe
    2007+ E92 3 Series Convertible including 328i, 335i
    2008+ E90/E92/E93 M3 including M3 coupe & M3 sedan
    Applications: 2007-- 328i 328xi 335i 335xi M3 (E92 E90)
    Part #: E92-BLACK-GRILLS
    Price:   $119.00
    Sale Price: $99.00
    Savings $20.00
    Email a Friend
    Carbon Fiber Trunk Lids

    click to enlarge
    		 E90 Carbon Fiber Trunk Lid - Fits 2006+ E90 Sedans
    This CSL inspired trunk lid, made by Carbon Fiber specialist Carbon8, fits all 2006+ E90 3 series sedans and saves precious weight over the heavy steel stock BMW trunk lid. It also looks great, especially if you are into the naked carbon fiber look. This particular trunk lid's styling has a slightly swept up rear edge, reminiscent of the E46 M3 CSL -- which also had a carbon fiber trunk lid with an integral "spoiler" edge built into it.

    We were pleasantly surprised by the fit and finish of this trunk lid, particularly at this price. The trunk lid fits as good as any other carbon fiber lid we've come accross. Some modifications and provisions need to be made to fit all trunk auxiliary components, such as lighting, trunk latch, hood shocks, emblems and interior trunk trim -- which is why we highly recommend professional installation on these (even if you're not having it painted). As with any carbon fiber or fiberglass body panel, extra time and preparation will be required to ensure the best fitment and installation. While no aftermarket body panels fit as perfectly as original OEM BMW panels, we were very satisfied with the overall quality and fit of these trunk lids. If you are mounting it unpainted to keep the carbon fiber visble, this trunk lid already comes with a clear gelcoat finish so that it is already exactly how you'd want it.

    Professional installation highly recommended.

    This carbon fiber trunk lid fits the following BMWs:
    2006+ E90 3 Series Sedan - 325i, 325xi, 330i, 330xi
    2007+ E90 3 Series Sedan - 328i, 328si, 335i, 335xi
    2008+ E90 M3 Sedan (4 door M3 only)
    Applications: 2006-- 325i 325xi 328i 328xi 330i 330xi 335i 335xi M3 (E90)
    Part #: E90CARBONFIBERTRUNKLID
    Price:   $599.95

    Email a Friend
    Body Trim and Accessories

    click to enlarge
    		 AeroCatch Racing Hood and Body Panel Fasteners (Pair) - Better than hood pins!
    As used by Turner Motorsport on our championship winning BMW race cars, the new aerodynamically efficient and asthetically styled AeroCatch® is setting new standards in hood fixing for the 21st century. Say goodbye to your standard hood pins -- these are better all around.

    AeroCatch Animation
    The AeroCatch is available in two installation styles:
    1.) TOP MOUNT - Mounts from the exterior surface of the hood. This style makes for an easier installation.
    2.) BOTTOM MOUNT - Mounts flush from the interior side of the hood. This style is slightly harder to mount, but makes for less exposed surface of the AeroCatch fastener.

    Each AeroCatch hood fastener kit comes complete with two AeroCatch assemblies, all pins, washers, nuts and bushings, as well as mounting template and installation instructions. Professional installation recommended. We have found these to be the best hood fasteners, and have since replaced all standard racing hood pins on our E46, E90 and E92 race cars in favor of these superior design. These save us precious time in pit stops and offer a more fail-safe mechanism. We recommend them for any car.

    AeroCatch Hood Pin Latching System with Locks Secure your investment! Add keyed locks to your pair of AeroCatches -- PERFECT for use on a street car, or any car that may be left unattended for any amount of time. Keep prying eyes (and hands) out of your engine bay by opting for the (optional) locking version of the AeroCatch. Locking versions available in both TOP MOUNT and BOTTOM MOUNT installation styles. Includes pre-installed lock cylinders and a pair of matched keys. Simply select your style below, before adding to cart.

    How They Work (PDF)
    Installation/Prep Instructions (PDF)
    Tech Specs (Top Mount) PDF
    Tech Specs (Bottom Mount) PDF
    Applications: 1962-2010 All (All)
    Part #: AEROCATCH
    Price:   $79.55
    Options: Choose style

    Email a Friend

    click to enlarge
    		 Racing Hood Pin Kit
    This universal fit racing hood pin kit not only looks great but provides a safe way to secure your hood at the track. This kit contains everything you need, two clasps, threaded pins and a complete hardware kit (not shown.) A durable anodized finish is available in red or blue.
    Applications: --- - (-)
    Part #: HOODPIN
    Price:   $19.95
    Options: Choose Color:

    Email a Friend
    People who like this product also like these products:
  • AeroCatch Racing Hood and Body Panel Fasteners (Pair) - Better than hood pins!
    		•

    click to enlarge
    		 Limited Edition TMS Rear Deck Emblem / Badge
    Milled from a solid piece of aluminum, this high quality rear deck emblem will look great on the back of your BMW! The face features a high polish finish and it affixes with automotive grade ahesive backing for easy installation and future removal. Measures 5" (127mm) x 1.1" (28mm).
    Applications: --- - (All)
    Part #: TMS EMBLEM
    Price:   $34.95

    Email a Friend

    click to enlarge
    		 Motorsport Tow Strap
    Tow strap as used on the TMS race cars, this BMW Motorsport part attaches to the front and rear bumper shock then threads through a small slit you cut in the bumper cover. Eliminate the need to carry around the factory metal eye hook. Color is bright orange so tow truck operators can quickly identify location. Two required per car, price is per strap.
    Applications: --- All (All)
    Part #: TOW
    Price:   $29.53

    Email a Friend
    People who like this product also like these products:
  • E36 and E46 Racing Tow Hooks
    		•

    click to enlarge
    		 Turner Motorsport Premium License Plate Frame (Steel with Polished/Chrome Plating)
    Our standard license plate frames are plastic -- these premium plate frames are steel with a polished/chrome plating for a classy and tasteful appearance. Each one comes complete with matching screw caps and the Turner Motorsport logo in black. Sold individually -- be sure to buy one for the front and rear, and enough for all of your BMWs.
    Applications: 1969-2012 All (All)
    Part #: LIC-WW-PREMIUM
    Price:   $12.95

    Email a Friend

    click to enlarge
    		 Genuine BMW License Plate Frame - Chrome/Silver Polished
    This is a Silver polished / chrome appearance license plate frame with "BMW" logo. This is a Genuine BMW part that looks great on any BMW. The "BMW" insert is domed for a classy look. The "BMW" insert is domed for a classy look. These look great framing the license plate on any BMW.

    These are sold individually, so be sure to order two -- one for the front license plate, and one for the rear.
    Applications: 1970-2008 ALL (ALL)
    Part #: 82120010395 (82 12 0 010 395)
    Price:   $37.99

    Email a Friend

    click to enlarge
    		 License Plate frame Black w/ M logo
    This is a Black license plate frame with the BMW motorsport "M" logo. This Genuine Original BMW part is a great way to improve the looks of any BMW. The "///M" emblem is domed for a classy look. These are sold individually, so be sure to order two -- one for the front license plate, and one for the rear.
    Applications: 1970-2007 ALL (ALL)
    Part #: 82120010404 (82 12 0 010 404)
    Price:   $37.99

    Email a Friend

    click to enlarge
    		 License Plate frame Silver Polished w/ M logo
    This is a Silver polished license plate frame with the BMW motorsport "M" logo. This Genuine Original BMW part is a great way to improve the looks of any BMW. The "///M" emblem is domed for a classy look. These are sold individually, so be sure to order two -- one for the front license plate, and one for the rear.
    Applications: 1970-2007 ALL (ALL)
    Part #: 82120010405 (82 12 0 010 405)
    Price:   $37.99

    Email a Friend

    click to enlarge
    		 M3 License Plate Frame Black
    This is a Black license plate frame with the BMW motorsport "M3" logo. This Genuine Original BMW part is a great way to improve the looks of any BMW. The "///M3" insignia is domed for a classy look. These look great framing the license plate on any E30 M3, E36 M3, E46 M3, or E90/E92 M3.

    These are sold individually, so be sure to order two -- one for the front license plate, and one for the rear.
    Applications: 1970-2007 ALL (ALL)
    Part #: 82120010400 (82 12 0 010 400)
    Price:   $37.99

    Email a Friend

    click to enlarge
    		 M3 License Plate Frame Silver Polished
    This is a Silver polished / chrome appearance license plate frame with the BMW motorsport "M3" logo. This Genuine Original BMW part is a great way to improve the looks of any BMW. The "///M3" insignia is domed for a classy look. These look great framing the license plate on any E30 M3, E36 M3, E46 M3, or E90/E92 M3.

    These are sold individually, so be sure to order two -- one for the front license plate, and one for the rear.
    Applications: 1970-2007 ALL (ALL)
    Part #: 82120010401 (82 12 0 010 401)
    Price:   $37.99

    Email a Friend

    click to enlarge
    		 M5 License Plate Frame Black
    This is a Black license plate frame with the BMW motorsport "M5" logo. This Genuine Original BMW part is a great way to improve the looks of any BMW. The "///M5" emblem is domed for a classy look and these look superb framing the license plate of any E28 M5, E34 M5, E39 M5, or E60 M5.

    These are sold individually, so be sure to order two -- one for the front license plate, and one for the rear.
    Applications: 1970-2007 ALL (ALL)
    Part #: 82110147531 (82 11 0 147 531)
    Price:   $37.99

    Email a Friend

    click to enlarge
    		 M5 License Plate Frame Silver Polished
    This is a silver polished / chrome appearance license plate frame with the BMW motorsport "M5" logo. This Genuine Original BMW part is a great way to improve the looks of any BMW. The "///M5" emblem is domed for a classy look and these look superb framing the license plate of any E28 M5, E34 M5, E39 M5, or E60 M5.

    These are sold individually, so be sure to order two -- one for the front license plate, and one for the rear.
    Applications: 1970-2007 ALL (ALL)
    Part #: 82120149104 (82 12 0 149 104)
    Price:   $37.99

    Email a Friend

    click to enlarge
    		 E90/E92 M3 Painted Front Bumper Reflectors - 2008+ E9x M3
    We have very little complaints about the latest 2008 and newer M3, except for it's bright orange front reflectors, which look very out of place. These professionally painted reflectors install in place of your stock orange units, and give your E90/E92/E93 M3 a cleaner look in minutes. They are a PERFECT match to your factory BMW paint and easily clip in just as your original units do. No need to remove the bumper cover and no need for any glue or adhesive -- your old units simply "pop" out, and these are carefully snapped in their place. It's that easy! These particular reflectors work ONLY for the 2008, 2009, 2010 and newer M3 coupe, sedan, and convertible. They do not fit any other model BMW.

    Please select your M3's color code below, using the drop down options.

    These painted reflectors fit the following BMWs:
    2008+ E90 M3 sedan
    2008+ E92 M3 coupe
    2008+ E93 M3 convertible
    Applications: 2008-- M3 (E90 E92 E93)
    Part #: E9X-M3-PAINTED-REFLECTORS
    Price:   $79.95
    Options: Choose paint color code

    Email a Friend
    Emblems and Decals

    click to enlarge
    		 Motorsport ///M Rear Emblem
    This is the original BMW "M" emblem which came on the trunk lid of E39 M5 and all of the M Roadsters & Coupes that came with the S54 engine ('01 and '02). It comes with an adhesive backing for easy installation. This is different than the older ///M emblem in that it curves outwards (convex).
    Applications: --- All (All)
    Part #: 51142694404 (51 14 2 694 404)
    Price:   $42.95
    Sale Price: $36.95
    Savings $6.00
    Email a Friend

    click to enlarge
    		 Motorsport M Rear Emblem
    Sometimes they get stolen from your M car, sometimes they fade, sometimes people buy them for their 528e! This is the flat ///M badge, as used on the E30 M3, E28 M5, E24 M6, E34 M5, and E36 M3. An original BMW part. This emblem has an adhesive backing, will not fit on front.
    Applications: 1900-3000 All (All)
    Part #: 51142250811 (51 14 2 250 811)
    Price:   $40.95
    Sale Price: $36.95
    Savings $4.00
    Email a Friend

    click to enlarge
    		 Racing Dynamics Rear Deck Emblem
    This chrome, adhesive backed badge is a great compliment to the Racing Dynamics products you may have on your BMW, and also gives your car a distinctive look. Easily afixes to your BMWs trunk lid.
    Applications: all-all all (all)
    Part #: 2500000002. (25 00 0 000 02.)
    Price:   $27.95

    Email a Friend

    click to enlarge
    		 Hartge Hood & Trunk Badges (Pair)
    Hartge hood and trunk badges to cover the stock roundel badges. Price is for 1 front and 1 rear.

    Applications:
    1991-1997 E31 all, including 840ci, 850i, 850ci, 850CSi
    1997-2003 E39 all, including 525i, 528i, 530i, 540i, M5
    2003-2007 E65 all, including 745, 750, 760
    2007-current E92 and E93 cabrio 328, 335
    2001-2006 X5 (E53)
    1996-2002 Z3 all, including M Roadster and M Coupe
    Applications: --- - (E31 E39 E65 E92 E93 E53 X5 Z3)
    Part #: 99390000
    Price:   $80.00
    Sale Price: $49.95
    Savings $30.05
    Email a Friend
    Rear Spoilers

    click to enlarge
    		 E90 M3 4-Door Sedan Rear Trunk Lid Spoiler Lip (Fits 2006-08 3 Series 4 door)
    This is the Genuine BMW rear trunk deck lid spoiler that is found on the 2008 and newer E90 M3 sedan. It fits all 2006+ 3 series 4 door sedans, including 325i, 325xi, 328i, 328xi, 330i, 330xi 335i, and 335xi. Comes primed, ready to paint. Professional painting and installation recommend.
    Applications: 2006-2008 325i 325xi 328i 328xi 330i 330xi 335i 335xi M3 (E90)
    Part #: 51628037779 (51 62 8 037 779)
    Price:   $225.00
    Sale Price: $189.95
    Savings $35.05
    Email a Friend
    People who like this product also like these products:
  • E92 M3 2-Door Coupe Rear Trunk Lid Spoiler Lip (Fits All 2007+ 3 Series 2 Door)
    		•
    Brake Ducts & Backing Plates

    click to enlarge
    		 Brake Duct Hose Kit - 3 inch with clamps
    If you are adding fully functional brake ducts to your track or race car, this hose kit is a must. It includes two 4 foot lengths of high-temp duct hose and 4 appropriate sized hose clamps. This is the same duct hose we use in our reknowned racing brake duct kits & our championship winning BMW race cars. This is the best suited and highest quality hose for the job. We wouldn't use anything less -- would you?
    Applications: --- All (All)
    Part #: TBR9962303
    Price:   $109.95
    Sale Price: $89.95
    Savings $20.00
    Email a Friend

    click to enlarge
    		 E90/E92 M3 GT4 Brake Ducts (Genuine BMW Motorsport)
    Very rare item, direct from BMW MOTORSPORT GMBH! These hand-made prototype style brake ducts are the same used on all of the M3 GT4. Each has 2.7" inch / 68mm outside diameter outlets, which can be connected to corresponding duct hose (not included). This item includes one left brake duct, and one right brake duct, as pictured.

    This can be used on any 2008+ E9x M3, including E90 M3 sedan, E92 M3 coupe and E93 M3 convertible.
    Applications: 2008-- M3 (E90 E92 E93)
    Part #: 51748321767-768
    Price:   $599.95

    Email a Friend
    Brake Fluid

    click to enlarge
    		 Castrol SRF Racing Brake Fluid (Liter Bottle)
    Castrol SRF Racing Brake Fluid is an ultra high performance product formulated specifically to satisfy the ever increasing stresses placed upon the braking systems used in international motorsport. The exceptional performance of Castrol SRF is due to a novel silicon ester technology pioneered by Castrol and unique to the extent that it has been granted patent-protection in numerous countries throughout the world.

    Brake Fluid Data Sheet
    Applications: --- - (-)
    Part #: SRF
    Price:   $74.95

    Email a Friend
    People who like this product also like these products:
  • Turner Motorsport Brake Bleeder Bottle
    		•

    click to enlarge
    		 Turner Motorsport Brake Bleeder Bottle
    The old school 2-man manual brake bleeding method is still the best and safest way to bleed your brakes. TMS does not sell automatic vacuum bleeders because we simply don't trust them. The Turner Motorsport Brake Bleeder Bottle is the perfect companion when bleeding your brakes! The bottle features a nice long flexible hose so fitment over the bleeder nipple is a snap. These bottles also offer either a magnetic mount or a cable lanyard, so you can hang the bottle or stick it to the brake rotor, this leaves your hands-free to work with your tools.
    Applications: --- - (-)
    Part #: BBM/BBL
    Price:   $14.95
    Options: Choose Type:

    Email a Friend
    People who like this product also like these products:
  • ATE Super Blue Brake Fluid (1 liter)
  • Ate Type 200 Racing Brake Fluid (1 liter)
    		•

    click to enlarge
    		 MOTUL RBF 600 Racing Brake Fluid (DOT4) - 500ml Bottle
    MOTUL RBF 600 is full 100% synthetic brake fluid specifically designed to resist the high temperatures of racing brake pads and clutch system. MOTUL RBF 600 far exceeds the standards of DOT3 and DOT4, with extremely high dry and wet boiling points to prevent vapor lock and brake fade.

    EXTREME THERMAL RESISTANCE AND STABILITY: The extremely high dry boiling point of RBF 600 (312°c / 593°F) enables effective braking under even the most extreme conditions of racing and competition.

    HIGH EFFICIENCY WHEN RAINY: The very high wet boiling point (216°c / 420°F) is superior to conventional brake fluids and provides a particularly efficient braking system in rainy conditions, resisting vapor lock.

    We use MOTUL in our own Championship Winning Turner Motorsport BMW race cars. Shouldn't you?
    Applications: --- all (all)
    Part #: RBF600
    Price:   $19.80

    Email a Friend

    click to enlarge
    		 ATE Super Blue Brake Fluid (1 liter)
    This high performance Brake Fluid is ideal for coping with the extreme demands posed by motor racing, autocross, or high performance driving. The overall high dry and wet boiling points make this fluid an excellent choice for street driven vehicles, too, where brake fluid is flushed less frequently than that in race-driven vehicles.

    The ATE Super Blue fluid exceeds all DOT 4 requirements, with a dry boiling point or 536 degrees F and a wet boiling point 396 degrees F. This fluid is NOT SILICONE and is compatible with conventional brake fluid. It also available in amber color (known as ATE TYP 200, which we also carry) to help when flushing the complete system. Tip: Rotating between amber and blue every other brake flush, allows you to flush until you see a distinct color change -- convserving fluid and, most importantly, assuring a full and proper flushing of the old brake fluid.

    Color: Blue

    Applications: 1967-2009 all (all)
    Part #: ATESB
    Price:   $19.95
    Sale Price: $12.95
    Savings $7.00
    Email a Friend
    People who like this product also like these products:
  • Turner Motorsport Brake Bleeder Bottle
  • Ate Type 200 Racing Brake Fluid (1 liter)
    		•

    click to enlarge
    		 Ate Type 200 Racing Brake Fluid (1 liter)
    This high performance Brake Fluid is ideal for coping with the extreme demands posed by motor racing, autocross, or high performance driving. The overall high dry and wet boiling points make this fluid an excellent choice for street driven vehicles, too, where brake fluid is flushed less frequently than that in race-driven vehicles.

    The ATE Type 200 fluid exceeds all DOT 4 requirements, with a dry boiling point or 536 degrees F and a wet boiling point 396 degrees F. This fluid is NOT SILICONE and is compatible with conventional brake fluid. It also available in blue tinted color (known as ATE Super Blue, which we also carry) to help when flushing the complete system. Tip: Rotating between amber and blue every other brake flush, allows you to flush until you see a distinct color change -- convserving fluid and, most importantly, assuring a full and proper flushing of the old brake fluid.

    Color: Amber (gold)

    Applications: 1967-2009 all (all)
    Part #: ATE200
    Price:   $19.95
    Sale Price: $12.95
    Savings $7.00
    Email a Friend
    People who like this product also like these products:
  • Turner Motorsport Brake Bleeder Bottle
  • ATE Super Blue Brake Fluid (1 liter)
    		•
    TMS Racing Brake Pads

    click to enlarge
    		 E39 M5, E46 330/M3, E38, E9x 330i/335i, Z4 M, Z8 Rear Cool Willy Racing Brake Pads (set)
    Rear Fitments:
    E39 M5 all
    E46 330i all
    E46 M3 all, including ZCP
    E38 all
    E90 330i all
    E90, E92 335i all
    Z4 M all
    Z8 all
    Applications: 2000-- M5, 330/M3, 740/750, 335, Z4 M (E39 E46 E38 E90 E92 E93 Z4)
    Part #: 548
    Price:   $199.44
    Sale Price: $185.33
    Savings $14.11
    Email a Friend
    People who like this product also like these products:
  • Caliper Bushing Upgrade Kit
    		•
    Brake Pads - Axxis / PBR Metal Master Street Pads

    click to enlarge
    		 E46 330, E46M3, E39M5,X5, Z8, 95-01 740,750,E9x 330i and all 335 Rear Metal Master Brake Pads (set)
    REAR E46 330, E46M3, E39M5,X5, Z8, 95-01 740,750,E9x 330i and all 335 PBR/ AXXIS METAL MASTERS
    Applications: 1995-2008 330, X5, Z8, 740, 750, M3, M5, 335 (E46 X5 Z8 E38 E39 E90 E91 E92 E93)
    Part #: D1397M
    Price:   $38.95

    Email a Friend
    People who like this product also like these products:
  • Caliper Bushing Upgrade Kit
    		•
    Brake Pads - Axxis / PBR Ultimate Street Pads

    click to enlarge
    		 Rear E46 330, X5, Z8, 95-01 740,750, E46 M3, E39 M5, E9X 330i, E9X 335 Axxis Ultimate Brake Pads
    Rear E46 330, X5, Z8, 95-01 740,750, E46 M3, E39 M5, E9X 330i, E9X 335 Axxis Ultimate Brake Pads
    Applications: 1995-2008 330, X5, Z8, 740, 750, M3, M5, 335 (E46 X5 Z8 E38 E39 E90 E91 E92 E93)
    Part #: A1397U
    Price:   $43.50

    Email a Friend
    People who like this product also like these products:
  • Caliper Bushing Upgrade Kit
    		•
    Hawk HPS High Performance Street Pads

    click to enlarge
    		 E46 330, E46 M3, E39 M5, X5, Z8, 95-01 740,750, E90 330i, Z4 M Rear Hawk HPS Street Performance Brake Pads
    Hawk HPS Street Performance Pads for REAR E46 330, E46 M3, E39 M5, X5, Z8, 95-01 740,750, E90 330i, Z4 M
    Applications: 1991-2008 330, X5, Z8, 740, 750, M3, M5, Z4 M (E46 X5 Z8 E38 E39 E90 E91 Z4)
    Part #: HB362F.642
    Price:   $98.26
    Sale Price: $83.52
    Savings $14.74
    Email a Friend
    People who like this product also like these products:
  • Caliper Bushing Upgrade Kit
    		•

    click to enlarge
    		 E90/E92/E93 M3 Hawk HPS Brake Pads - 2008+ M3
    FRONT SET for E9x (E90 E92 and E93) M3
    Applications: 2008-- M3 (E90 E92 E93)
    Part #: HB551F.748
    Price:   $122.70
    Sale Price: $104.30
    Savings $18.40
    Email a Friend
    Hawk HP Plus Street/Track Brake Pads

    click to enlarge
    		 E46 330, E46 M3, E39 M5, X5, Z8, 95-01 740,750, E90 330i, Z4 M Rear Hawk HP Plus Track/Street Brake Pads
    Hawk HP Plus Track/Street Pads for REAR E46 330i/Ci/xi, E46M3, E39M5, X5, Z8, 95-01 740,750, E90 330i, Z4 M
    Applications: 1991-2008 330, X5, Z8, 740, 750, M3, M5, Z4 M (E46 X5 Z8 E38 E39 E90 E91 Z4)
    Part #: HB362N.642
    Price:   $133.41
    Sale Price: $113.40
    Savings $20.01
    Email a Friend
    People who like this product also like these products:
  • Caliper Bushing Upgrade Kit
    		•

    click to enlarge
    		 Hawk HP Plus Rear Brake Pads (Street/Track) for E9x M3, E60 M5, E63 M6
    REAR SET for 2008+ E90/E92/E93 M3, 2006+ E60 M5 and 2006+ E63 M6
    Applications: 2006-- M3 M5 M6 (E60 E63 E90 E92 E93)
    Part #: HB630N.626
    Price:   $157.50
    Sale Price: $109.00
    Savings $48.50
    Email a Friend

    click to enlarge
    		 E90/E92/E93 M3 Hawk HP Plus Front Brake Pads - 2008+ M3
    FRONT SET for E9x (E90 E92 and E93) M3
    Applications: 2008-- M3 (E90 E92 E93)
    Part #: HB551N.748
    Price:   $149.20
    Sale Price: $126.92
    Savings $22.28
    Email a Friend
    Hawk Blue Racing Brake Pads

    click to enlarge
    		 E46 330, E46 M3, E39 M5, X5, Z8, 95-01 740,750, E90 330i, Z4 M REAR HAWK Blue Racing Brake Pads (set)
    Hawk Blue Racing Performance Pads for REAR E46 330, E46 M3, E39 M5, X5, Z8, 95-01 740,750, E90 330i, Z4 M

    These pads are strictly for track use ONLY! Unlike the TMS carbon pads above, Hawks are not designed to perform at low temperatures that are normally experienced in ANY street car!
    Applications: 2001-- 330, X5, Z8, 740, 750, M3, M5, Z4 M (E46 X5 Z8 E38 E39 E90 E91 Z4)
    Part #: HB362E.642
    Price:   $195.19
    Sale Price: $165.91
    Savings $29.28
    Email a Friend
    People who like this product also like these products:
  • Caliper Bushing Upgrade Kit
    		•

    click to enlarge
    		 E90/E92/E93 M3 Front Hawk Blue Racing Brake Pads - 2008+ M3
    FRONT SET for E9x (E90 E92 and E93) M3
    Applications: 2008-- M3 (E90 E92 E93)
    Part #: HB551E.748
    Price:   $212.00
    Sale Price: $182.00
    Savings $30.00
    Email a Friend
    Hawk HT10 Racing Brake Pads

    click to enlarge
    		 E46 330, E46 M3, E39 M5, X5, Z8, 95-01 740,750, E90 330i, Z4 M Rear Hawk HT10 Race Brake Pads
    Hawk HT10 Racing Performance Pads for REAR E46 330, E46 M3, E39 M5, X5, Z8, 95-01 740,750, E90 330i, Z4 M
    Applications: 1991-2008 330, X5, Z8, 740, 750, M3, M5, Z4 M (E46 X5 Z8 E38 E39 E90 E91 Z4)
    Part #: HB362S.642
    Price:   $203.57
    Sale Price: $173.03
    Savings $30.54
    Email a Friend
    People who like this product also like these products:
  • Caliper Bushing Upgrade Kit
    		•

    click to enlarge
    		 E90/E92/E93 M3 Hawk HT10 Race/Track Brake Pads (FRONT) - 2008+ M3
    FRONT SET for E9x (E90 E92 and E93) M3
    Applications: 2008-- M3 (E90 E92 E93)
    Part #: HB551S.748
    Price:   $219.00
    Sale Price: $191.00
    Savings $28.00
    Email a Friend
    Pagid Brake Pads

    click to enlarge
    		 E46 330, E46M3, E39M5,X5, Z8, 95-01 740,750,E9x 330i and all 335 Rear Pagid Brake Pads (set)
    REAR E46 330, E46M3, E39M5,X5, Z8, 95-01 740,750,E9x 330i and all 335 Choose from street (dark blue) or race pads below.
    Applications: 1999-2008 330, X5, Z8, 740, 750, M3, M5, 335 (E46 X5 Z8 E38 E39 E90 E91 E92 E93)
    Part #: U2685
    Price:   $179.95
    Options: Choose compound:

    Email a Friend
    People who like this product also like these products:
  • E36 M3, E46 330, M3, MZ3, E34 M5 Pagid Brake Pads - FRONT
  • Caliper Bushing Upgrade Kit
    		•

    click to enlarge
    		 Pagid REAR Brake Pads for E60 M5 & E90/E92/E93 M3
    Pagid REAR brake pads for 2006+ E60 M5 and 2008+ E90/E92/E93 M3 (sedan, coupe & convertible). Choose your brake pad compound from the options below.
    Applications: 2006-- M5 M3 (E60 E90 E92 E93)
    Part #: U8021(S)
    Price:   $388.08
    Sale Price: $358.80
    Savings $29.28

     Options: Select pad compound

    Email a Friend
    People who like this product also like these products:
  • E60 M5 E63 M6 Pagid Racing Brake Pads - FRONT
    		•

    click to enlarge
    		 Pagid FRONT Brake Pads for E90/E92/E93 M3 & 335i
    Pagid FRONT brake pads for E90/E92/E93 M3 & 335i (sedan, coupe & convertibles). Choose your brake compound from the options below.
    Applications: 2007-- M3 335i 335xi (E90 E92 E93)
    Part #: U8053(S)
    Price:   $417.12
    Sale Price: $394.66
    Savings $22.46

     Options: Select pad compound

    Email a Friend
    Pads for Brembo Calipers

    click to enlarge
    		 Hawk HP Plus Track/Street Pads for Brembo Big Brake Kit (Lotus caliper)
    Hawk HP Plus pads were designed for autocross use and are a great pad when a track pad is needed for light use on the street. It was designed specifically for autocross, Solo II, and driver school events. HP Plus pads feature high friction levels in a broad temperature range, allowing you to use these pads to get to and from the track and still achieve ‘race-level’ braking performance on the course.

    These pads fit the Brembo calipers commonly known as the Lotus caliper and will work in any application that uses the Lotus caliper. These are Brembo pad part #107.5146.31. The Lotus calipers are used in the following BMW Brembo kits:
    E30: E30 M3 front
    E36: E36 M3 rear
    E46: E46 M3 rear
    E90/E92: E90 325/330/335 rear
    Z3: MZ3 rear
    Z4: Z4 M rear
    MINI R53: MINI Cooper/Cooper S rear
    Applications: --- - (E30, E36, E46, E90, E92, Z3, Z4, MINI)
    Part #: HB194N.570
    Price:   $156.35
    Sale Price: $132.89
    Savings $23.46
    Email a Friend

    People who like this product also like these products:
  • E30M3, E32, E34 all, E36 all, Z3 all incl M, E46 323/325/328, Z4 2.5/3.0 Rear Hawk HP Plus Track/Street Brake Pads
    		•

    click to enlarge
    		 Hawk HPS Street Pads for Brembo Big Brake Kit (F40 Calipers)
    The HPS pads are perfect for drivers who don’t want the standard replacement pad and want something that will hold up for aggressive street and light autocross/track driving. These pads fit the Brembo F40 calipers used in several Brembo Big Brake Kits. These pads will work in any application that uses the F40 caliper designation. These are Brembo pad part #ST04R592-15.

    These pads fit the Brembo F40 calipers used in several Brembo Big Brake Kits. These pads will work in any application that uses the F40 caliper designation. These are Brembo pad part #ST04R592-15. F40 calipers are used in the following BMW Brembo kits:
    E36 323/325/328/M3: E36 front 320mm, E36 M3 front 332mm, E36 M3 front 355mm/4-piston
    E46 323/325/328/330/M3: E46 front 320mm, E46 330 rear 345mm, E46 M3 front 355mm/4-piston
    E90 325/330: E90 325/330 front 355mm/4-piston
    Z3 2.3/2.8/3.0, MZ3: Z3 front 320mm, MZ3 front 332mm, MZ3 front 355mm/4-piston
    Z4 2.5/3.0, Z4 M: Z4 front 320mm, Z4 M front 355mm/4-piston
    E39 525/528/530/540/M5: E39/E39 M5 rear 345mm
    E60 525/530/545/550/M5: E60/E60 M5 rear
    E63/E64 645/650/M6: E63/E63 M6 rear
    McLaren F1: F1 front
    Applications: --- - (E36, E39, E46, E60, E63, E90, Z3, Z4, F1)
    Part #: HB193F.670
    Price:   $140.88
    Sale Price: $119.75
    Savings $21.13
    Email a Friend

    People who like this product also like these products:
  • E30M3, E32, E34 all, E36 all, Z3 all incl M, E46 323/325/328, Z4 2.5/3.0 Rear Hawk HPS Street Performance Brake Pads
    		•

    click to enlarge
    		 Pagid Yellow Track/Race Pads for Brembo Big Brake Kit (F40 Calipers)

    Yellow RS 29: Racing New endurance compound. This compound combines the outstanding wear rate of the RS19 with a slightly higher coefficient of friction and initial bite. Due to its outstanding wear rate and driveability, PAGID endurance materials are often used at sprint races as well.

    These pads fit the Brembo F40 calipers used in several Brembo Big Brake Kits and Gran Turismo kits. These pads will work in any application that uses the F40 caliper designation. These are Brembo pad part #ST04R592-15. F40 calipers are used in the following BMW Brembo kits:
    E36 323/325/328/M3: E36 front 320mm, E36 M3 front 332mm, E36 M3 front 355mm/4-piston
    E46 323/325/328/330/M3: E46 front 320mm, E46 330 rear 345mm, E46 M3 front 355mm/4-piston
    E90 325/330: E90 325/330 front 355mm/4-piston
    Z3 2.3/2.8/3.0, MZ3: Z3 front 320mm, MZ3 front 332mm, MZ3 front 355mm/4-piston
    Z4 2.5/3.0, Z4 M: Z4 front 320mm, Z4 M front 355mm/4-piston
    E39 525/528/530/540/M5: E39/E39 M5 rear 345mm
    E60 525/530/545/550/M5: E60/E60 M5 rear
    E63/E64 645/650/M6: E63/E63 M6 rear
    McLaren F1: F1 front
    Applications: --- - (E36, E39, E46, E60, E63, E90, Z3, Z4, F1)
    Part #: U1287/RS29
    Price:   $339.95

    Email a Friend

    Brake Pad Catalog

    click to enlarge
    		 Turner Motorsport Brake Pad Catalog
    Turner Motorsport carries brake pads for almost every BMW. Click here for the complete list of street, intermediate, and race pads that we carry.
    Applications: 1983-2009 - (E30 E32 E34 E36 E39 E46 Z3 Z4)
    Part #: brake_pad_app
    Price:   $0.00

    Email a Friend
    HD/Racing Clutch Kits

    click to enlarge
    		 E9X M3 Grand Am KONI GS Legal Racing Flywheel and Clutch Kit (OS Giken)
    This is the Grand Am KONI GS legal racing flywheel and clutch kit, made by renowned drivetrain specialist, OS Giken. This is the same clutch and flywheel setup used on our E92 M3 KONI Challenge GS class race cars, as approved by Grand Am race regulations. Includes flywheel, clutch discs (2 disc clutch), center plate, pressure plate, aluminum cover, 360 degree housing (for clutch assembly), cover bolts, flywheel bolts, throw-out bearing, and release sleave assembly. Weighs 5% less than the stock E90/E92 M3 flywheel and clutch setup. For racing use only. It is recommend to use the OS Giken clutch alignment tool during installation (sold separately).
    Applications: 2008-- M3 (E90 E92)
    Part #: BM533-BF6
    Price:   $2,270.50
    Options: Add OS Giken alignment tool?

    Email a Friend
    People who like this product also like these products:
  • OS Giken E9X M3 Clutch Overhaul Kit (for Grand Am Legal Racing Flywheel/Clutch)
  • OS Giken E9X M3 Clutch Alignment and Installation Tool
    		•

    click to enlarge
    		 OS Giken E9X M3 Clutch Alignment and Installation Tool
    This rugged tool simulates the input shaft of the 2008 and newer E90 and E92 M3 transmission, for easy installation of the OS Giken racing clutch kit. This tool is simply a must if you will be installing a clutch into the newer V8 model M3.
    Applications: 2008-- M3 (E90 E92)
    Part #: BM533-EB
    Price:   $100.00

    Email a Friend
    People who like this product also like these products:
  • E9X M3 Grand Am KONI GS Legal Racing Flywheel and Clutch Kit (OS Giken)
  • OS Giken E9X M3 Clutch Overhaul Kit (for Grand Am Legal Racing Flywheel/Clutch)
    		•

    click to enlarge
    		 OS Giken E9X M3 Clutch Overhaul Kit (for Grand Am Legal Racing Flywheel/Clutch)
    This kit includes parts needed to overhaul the OS Giken E90/E92 M3 Grand Am legal clutch kit, including clutch discs (2), center plates, and cover bolts (all). As used in the Grand Am KONI Challenge GS class V8 M3s, including both Turner Motorsport E92 M3 race cars.
    Applications: 2008-- M3 (E90 E92)
    Part #: BM533-BF60A
    Price:   $890.00

    Email a Friend
    People who like this product also like these products:
  • E9X M3 Grand Am KONI GS Legal Racing Flywheel and Clutch Kit (OS Giken)
  • OS Giken E9X M3 Clutch Alignment and Installation Tool
    		•
    UUC Short Shift Kits

    click to enlarge
    		 UUC EVO3 Short Shift Kit for E90/E92/E93 M3, 2008+
    UUC's Ultimate Short shifter has been rated #1 over all competing brands in a major BMW enthusiast magazine. Simply put, there is nothing better available at any price.

    This short shift kit is made specifically for the 2008 and newer M3, in either E90 sedan, E92 coupe, or E93 convertible chassis. This short shit kit works on all 2008, 2009 and newer M3 with 6 speed manual transmission. Constructed of 100% stainless steel and aluminum, it offers the same superior features that put the UUC short shifter kit at the top of it's game. If your like us, and feel the 2008+ M3 suffers from somewhat uninspiring, soft, floaty and vauge shifter feel, this UUC EVO 3 short shift kit includes everything to correct this. All the parts to transfrom your shifter for shorter throw, tighter feel, and more responsiveness while driving your ultimate driving machine.

    Want the ultimate shifter feel, with the least amount of lateral play? Upgrade this kit by adding a UUC Dual Shear Selector Rod ("DSSR" for short). A DSSR can be added to any shifter setup (stock or aftermarket, including this UUC EVO3), and when combined with the EVO3, you will have the most accurate, most precise, and simply the best shift setup available for your BMW. To upgrade this EVO3 kit to include a DSSR, simply choose from the options below. To read more about the DSSR,     click here.

    This UUC short shift kit fits the following BMWs:
    2008+ E90 M3 Sedan with 6 speed manual
    2008+ E92 M3 Coupe with 6 speed manual
    2008+ E93 M3 Convertible with 6 speed manual
    Applications: 2008-newer M3 (E90 E92 E93)
    Part #: USSE9M
    Price:   $385.00
    Sale Price: $355.00
    Savings $30.00

    Options: Add a DSSR?

    Email a Friend
    People who like this product also like these products:
  • UUC DDSR for E9x M3 (2008+ E90/E92 M3)
    		•
    DSSR - UUC Double Shear Selector Rod

    click to enlarge
    		 UUC DDSR for E9x M3 (2008+ E90/E92 M3)
    UUC Double Shear Selector Rod - E9X M3 (2008+ E90/E92/E93 M3)
    Increases the precision and smoothness of ALL shifters -- OE and aftermarket! Whether you have a factory stock shifter or aftermarket short shift kit, this Dual Shear Selector Rod (DSSR) will dramatically improve it.

    The goal.
    While producing a "short" shifter, our more important goal in improving the BMW shifter assembly is to increase the precision and smoothness of the overall operation.

    The problem.
    One significant wear area that has never been addressed previously is the wear and ovalization of the linkage connection points at the transmission and the shifter's lower pivot.

    In the original BMW design, the connection at both ends has a large injection-molded plastic bushing. We already know how badly plastic wears in an automotive application, and these areas are not an exception. The design of the selector rod has a pin at 90° to the main rod, which exerts a tremendous amount of leveraged force on the selector joint bushing from one side (known as a single shear force). The result is a steady deformation of the bushing, resulting in looseness and slop in the entire mechanism. (see photo at right) The image shows a selector joint that has approximately 25K miles of use.

    The looseness and slop are magnified by the leverage-multiplication effect of the shift lever itself. The result is an in-gear shifter "free play" of 3/4" and up to 1" in either direction, over 35mm total.

    The cure.
    A temporary fix is to simply replace the selector joint. Unfortunately, this is only a temporary fix as the new joint's bushing will exhibit the same rapid deformation. To permanently fix this, a change in the fundamental design of the pivot is required, changing the assembly to a double shear system with the UUC Double Shear Selector Rod (DSSR).

    The DSSR redistributes the torsional forces from the pin/bushing interface to the complete face area on both sides of the selector joint. By taking advantage of the strength of steel in the DSSR and the body of the joint, the problem of deformation is eliminated and the movement of the selector rod correlates directly to movement of the selector joint - the only "free play" movement remaining in the shifter assembly is from within the transmission itself. In-gear "free play" is reduced to approximately 10mm total when used with a UUC EVO3 shifter.

    The original BMW shifter and all other aftermarket shifters (except UUC which uses deformation-free bearings) contain a plastic bushing similar to the selector joint, and the exact same wear and ovalization causes those shifters to get sloppy. The DSSR permanently fixes these shifters also. The DSSR is compatible with all brand shifters, whether original BMW or other-brand aftermarket. When used with the original BMW shifter or other aftermarket shifters, the amount of "free play" will be greatly reduced but varies by shifter (flexation of the shifter shaft contributes to the total "free play" travel).

    This rod fits ONLY the 2008, 2009, 2010 and newer E9x M3, including E90 M3 sedan, E92 M3 coupe and E93 M3 convertible.
    Applications: 2008-- M3 (E90 E92 E93)
    Part #: DSSR112
    Price:   $129.00

    Email a Friend
    People who like this product also like these products:
  • UUC EVO3 Short Shift Kit for E90/E92/E93 M3, 2008+
    		•
    Differential

    click to enlarge
    		 OS Giken Super Lock Limited Slip Differential Unit for E9x M3 (E90/E92 M3)
    The limited slip unit on the 2008+ M3 (E90 and E92 chassis) is designed to be a pure street car differential. It's simply not up to the rigors of professional or amateur racing. The OS Giken Super Lock LSD is giant step up in from a stock E90/E92 M3 lsd unit. It's ready for the extreme conditions of racing, offers 100% progressive locking capability, and is able to do this while operating smoothly and quietly. It's use of advanced technologies that make it perfect for both street cars AND pro race cars... and everything in between. We're excited to be carrying the OS Giken LSD unit in our performance catalog, as we've been using them in our own Championship winning E46 M3 race cars.

    OS Giken incorporated revolutionary new ideas when developing the their own limited slip diff, utilizing their accumulated racing knowledge and experience and over 4 years of development. Their design uses an unprecedented number of friction plates (up to 28 total!) for better locking force, better engagement/disengagement, and less generated heat. The end result of their efforts is the OS Giken's OS Super Lock LSD which offers incredible durability and reliability on street and track driven BMWs. The use of highest quality materials, precise machining, forged gears and sound engineering makes this LSD durable and reliable enough for road racing performance (which we can personally vouch for!). This is such a great design, in that it can be used in any situation -- whether it's for a street car, or a 100% Professional race car. Zero break-in required. Super smooth and quiet engagement, and 100% progressive locking capability. Professional installation is recommended.

    This Limited Slip Differential Unit fits the following BMWs:
    2008+ E90 M3 sedan
    2008+ E92 M3 coupe
    2008+ E93 M3 convertible
    Applications: 2008-- M3 (E90 E92 E93)
    Part #: BM237-HA.
    Price:   $1,890.00
    Sale Price: $1,795.00
    Savings $95.00
    Email a Friend
    Oil Cooler Kits and Oil Cooler Components

    click to enlarge
    		 E90/E92 M3 Dry Sump Kit
    This dry sump kit is designed specifically for race applications of the S65 V8 engine, as used on the E9x M3, 2008+, and is identical to what is being used on our own GrandAm KONI Challenge E92 M3(s), which are currently in development for their race debut. Dry sumping the engine delivers the most consistent and reliable oil pressure possible (a must for any professional racing or endurance racing team), but it reduces a large a amount of parasitic power loss due to the extremely high efficiency of the pump.

    No expense was spared in the development or production of this dry sump kit, which is built to perform under the rigors of professional racing. This is a complete setup, which includes all related parts to make this as much of a "bolt on" setup as possible.

    Dry sump kit includes the following:
    • Dailey 5 Stage Dry Sump Oil Pump / Air Seperator
    • S65 B40 Oil Pan Assembly (CNC Aluminum)
    • Dry Sump Pulley Kit
    • Dry Sump Belt
    • S65 Power Steering Pulley Kit
    • Alternator Pulley
    • ARP Rod Bolts
    • EGR Cover Mount Set
    • Thermostat Tube
    • PVC Plug/Cover
    • Oil Block Assembly w/ Fittings
    • Crank Pressure Sensor Adapter
    • Oil Pump Drive Gear

     Professional installation is highly recommended. Due to the nature of racing parts of this nature, this kit is sold with no express or implied warranty.
    Applications: 2008-- M3 (E90 E92)
    Part #: E90-E92-DRY-SUMP-KIT
    Price:   $6,996.00

    Email a Friend
    External Engine Components

    click to enlarge
    		 32mm / 36mm Fan Clutch and Oil Filter Cap Open-End Wrench
    Why buy two tools when you can get one that will do many jobs like this open end wrench? It is great for removing and installing the fan clutch and plastic oil filter cap. Also works great for removing and installing the vanos solenoid on M50 engine family. Use the same tools the Turner Motorsport techs use!
    Applications: --- All (All)
    Part #: TMI9910334
    Price:   $54.95

    Email a Friend
    Underdrive Power Pulleys

    click to enlarge
    		 E9x M3 Power Pulley Kit (All 2008+ E90/E92/E93 M3)
    Get MORE HORSEPOWER and TORQUE on your 2008, 2009 and newer M3 coupe, sedan or convertible by replacing the stock crank pulley with this specially designed performance version. The Power Pulley reduces rotational mass and safely under drives your belt driven auxiliaries for reduced parasitic power loss. The end result: More power to your M3's rear wheels! Designed to give the best performance benefit with no sacrifices or compromises to your BMW's reliability. These have been tested on hundreds of cars before public release and there are simply NO DOWNSIDES to this upgrade.

    CNC machined using aircraft grade 6061 aluminum billet, and anodized with a stealthy black coating. Others may advertise "their" crank pulley boasting higher numbers (using a smaller pulley profile), but we have concluded that for street and track driven M3s, this is the best size and design to ensure proper engine temp and auxiliary functionality. As the S65 M3 V8 engine doesn't use a traditional harmonic balancer, all factory harmonics and dampening are fully and properly retained. We've found this pulley alone adds 10 to 14 HP and 7 to 9 Ft/lbs Torque on a stock M3 with no other mods(!!).

    FREE 2-DAY SHIPPING!
    Limited time introductory offer: FREE UPS 2nd-DAY AIR shipping on all orders shipped within the 48 contiguous states shipping on this E9x M3 pulley kit.
    The E9x M3 Power Pulley Kit includes:
    (1) Underdrive Crank Pulley
    (1) Correctly Sized Drive Belt
    (6) Allen Head Bolts
    (1) Installation instructions

    Fits the following BMWs:
    2008+ E90/E92/E93 M3 6 Speed Manual Transmission
    2008+ E90/E92/E93 M3 DCT Double Clutch Transmission

    Please select the year/transmission of your M3 (below) so that we may send you the proper parts for your application. There are specific kits for 2008 vs 2009+ model years, as well as manual transmission versus DCT sequential gearboxes. Choose below.
    Applications: 2008-2009 M3 (E90 E92 E93)
    Part #: E90-E92-M3-POWER-PULLEY
    Price:   $399.95
    Options: Select your M3

    Email a Friend
    People who like this product also like these products:
  • E90/E92/E93 M3 Performance Engine Software - Stage 1
  • E90/E92/E93 M3 Performance Engine Software - Stage 2 (Race)
  • UUC EVO3 Short Shift Kit for E90/E92/E93 M3, 2008+
    		•
    Engine Electronics

    click to enlarge
    		 Sparco/OMP Battery Cut Off Switch / Kill Switch
    Sparco/OMP Battery Cut Off Switch / Kill Switch, for use in racecars as an emergency "kill switch", to depower the electrical system in the event of a crash or other emergency. This cut off switch is FIA approved, has 6 poles and alternator protection, as well as a removable key.
    Applications: --- All (All)
    Part #: 01335
    Price:   $62.00

    Email a Friend
    Performance Software: 2005+ Cars

    click to enlarge
    		 E90/E92/E93 M3 Performance Engine Software - Stage 1
    Add horsepower and torque to your E9x M3's 4.0 liter V8 instantly, by upgrading the Engine's computer software. This performance software optimizes ignition timing, fuel mixture and vanos to increase horsepower by 17hp as well as increasing torque by 16 lb/ft. We also remove the top speed limiter and, if you choose, we can increase the stock 8300 rpm rev limit by 300 rpm for a new rev limit of 8600 (choose your option below).

    Horsepower Gain +17 hp
    Torque Gain +16 lb/ft
    Rev Limit (optional) +300 rpm (8600)
    (power as measured at wheels)

    As this is a reflash of your stock computer, you will need to send us your engine control unit (ECU) to perform the upgrade. We have a detailed instruction sheet on removing the engine control unit which you can find below. Once we have your M3's ECU, our hardware software experts will update the programming with our custom software. Typical turn around on this software reflash is 1 day. Example: If you ship it to us overnight on Monday, We get it Tuesday. We flash it and ship back overnight, you get it back Wednesday. Sometimes it takes us 2 days to reflash if you have a version of the sock software we have not seen before) We recommend shipping the ECU via UPS or FedEx overnight service for safest and quickest delivery.

    Price includes a no charge "Reflash" in case your dealer performes an update to your car that wipes out our flash.

    This performance engine software (reflash) is for the following BMWs:
    2008+ E90 M3 Sedan
    2008+ E92 M3 Coupe
    2008+ E93 M3 Convertible

    Click here for instructions on removing the computer
    Click here for specific instructions on shipping the computer.
    Applications: 2008-2009 M3 (E90 E92 E93)
    Part #: E90-E92-M3-SOFTWARE-STAGE1
    Price:   $1,799.00
    Sale Price: $1,699.00
    Savings $100.00

    Options: Increase rev limit?

    Email a Friend
    People who like this product also like these products:
  • E90/E92/E93 M3 Performance Engine Software - Stage 2 (Race)
  • E90/E92 M3 Coupe Supersprint Sport Muffler Exhaust System - Includes Left & Right
    		•

    click to enlarge
    		 E90/E92/E93 M3 Performance Engine Software - Stage 2 (Race)

    dyno chartOur Stage 2 software for the E90/E92 M3 makes use of the same features of our street legal Stage 1 software - altering ignition timing, fuel mixture tables, and VANOS operation with the added benefit of using a racing exhaust without the front catalytic converters. This software has specific changes for the cat-delete to turn the check engine light off and prevent the car from going into limp mode. An optional 8600 RPM rev limit is available (stock is 8300). The top speed limiter is removed. This product is for the software only and should be combined with our front cat-delete pipes     (click here).

    Horsepower Gain +40 hp @8000 rpm
    Torque Gain +32 lb/ft @3000 rpm
    Rev Limit (optional) +300 rpm (8600)
    (power as measured at wheels and includes Stage 2 cat-delete pipes)

    Video: Dyno'ing Stage2 on a 2008 M3

    click for high quality
    As this is a reflash of your stock computer, you will need to send us your engine control unit (ECU) to perform the upgrade. We have a detailed instruction sheet on removing the engine control unit which you can find below. Once we have your M3's ECU, our hardware software experts will update the programming with our custom software. Typical turn around on this software reflash is 1 day. Example: If you ship it to us overnight on Monday, we will get it Tuesday*. We flash it and ship it back overnight so you get it back Wednesday. * Sometimes it takes us 2 days to reflash if you have a version of the sock software we have not seen before. We recommend shipping the ECU via UPS or FedEx overnight service for safest and quickest delivery.

    This performance engine software (reflash) is for the following BMWs:
    2008+ E90 M3 Sedan
    2008+ E92 M3 Coupe
    2008+ E93 M3 Convertible

    This part alters or deletes the emissions equipment on your car. Because of this, we require a waiver of emissions compliance to be signed and sent in to TMS. You can download the waiver here.

    Click here for instructions on removing the computer
    Click here for specific instructions on shipping the computer.
    Click here for vehicle emissions waiver.
    Applications: 2008-2009 M3 (E90 E92 E93)
    Part #: E90-E92-M3-SOFTWARE-STAGE2
    Price:   $1,899.00
    Sale Price: $1,799.00
    Savings $100.00

    Options: Increase rev limit?

    Email a Friend
    People who like this product also like these products:
  • E90/E92 M3 Test Pipes (Cat Delete)
  • E90/E92 M3 Coupe Supersprint Sport Muffler Exhaust System - Includes Left & Right
  • E90/E92/E93 M3 Performance Engine Software - Stage 1
    		•
    Supersprint Exhaust Systems

    click to enlarge
    		 E90/E92 M3 Coupe Supersprint Connecting Pipes (for OEM Center Pipe)
    E92 M3 Supersprint Connecting Pipes. This set of two connecting pipes is required to install the Supersprint Sport or Street mufflers on an M3 using the OEM stock center pipe. These connecting pipes are not required if you are using the Supersprint X-Pipe.
    Applications: 2008-newer M3 (E90 E92)
    Part #: 980743
    Price:   $199.50
    Sale Price: $147.78
    Savings $51.72
    Email a Friend
    People who like this product also like these products:
  • E90/E92 M3 Coupe Supersprint Sport Muffler Exhaust System - Includes Left & Right
    		•

    click to enlarge
    		 E90/E92 M3 Coupe Supersprint X Pipe
    E92 M3 Coupe Supersprint X Pipe, designed to replace the stock resonator. This will increase sound, reduce weight and improve exhaust flow. The straight-flow design allows much better flow than the stock resonator while still preserving low noise levels and a throaty sound.

    When used with a Supersprint Sport or Street muffler, this X Pipe eliminates the need for the connecting pipes, and can be connected directly to either the Sport mufflers (left and right) or the Supersprint Street muffler (single muffler).
    Applications: 2008-newer M3 (E90 E92)
    Part #: 980713
    Price:   $971.07
    Sale Price: $719.31
    Savings $251.76
    Email a Friend
    People who like this product also like these products:
  • E90/E92 M3 Coupe Supersprint Sport Muffler Exhaust System - Includes Left & Right
    		•

    click to enlarge
    		 E90/E92 M3 Coupe Supersprint Sport Muffler Exhaust System - Includes Left & Right
    Supersprint Sport Mufflers, left and right, for the 2008 and newer E90 and E92 M3 coupe. On 4 door models, the tips stick out an extra inch than they do on the coupe.

    *** Note: To use this system, you must purchase either the Supersprint connecting pipes for OEM center pipe (part# 980743) OR the Supersprint X-Pipe (part# 980713) to replace the OEM center pipe. Select your options below.

    Applications:
    2008- newer E90, E92, E93 M3 coupe, sedan, cabrio
    Applications: 2008-newer M3 (E90 E92 E93)
    Part #: 045-106_045-136
    Price:   $3,170.40
    Sale Price: $2,347.78
    Savings $822.62

     Options: Add Supersprint pipes?

    Email a Friend
    People who like this product also like these products:
  • E90/E92 M3 Coupe Supersprint Connecting Pipes (for OEM Center Pipe)
  • E90/E92 M3 Coupe Supersprint X Pipe
    		•
    UUC / Corsa Performance Exhaust

    click to enlarge
    		 E90/E92 M3 UUC / Corsa Performance Exhaust (2008+)
    Corsa Performance T-304 stainless exhaust system for 2008, 2009 and newer E90/E92/E93 M3 (sedan, coupe & convertible). Features mandrel-bent tubing, polished quad 3" tips (double-walled, angle cut and staggered), and drone-free quiet-cruising, thanks to Corsa's patented Reflective Sound-Cancellation (RSC) technology.

    Video/Sound Clip: 2009 M3 Coupe
    This is a drone-free exhaust system, delivering a pleasant sound at idle and cruise and a muscular roar at high rpm. How is this accomplished? The RSC technology is a non-electrical noise control system without the complication of incorporating the use of electronics or speakers. Essentially, engine sound (pressure) waves are reflected in passages inside the muffler 180 degrees out of phase to cancel out unwanted sound waves. The result is a "tuned" muffler that "cleans up" the noise without eliminating the pure sound of power associated with a high-performance vehicle. Using this Corsa technology, the stainless steel Corsa Performance line of mufflers are tuned to eliminate passenger cabin resonance and produce just the "right" sound. The result is quieter cruising with an awe-inspiring roar at full throttle. This system is amazingly quiet during normal cruising, due to the "no drone" RSC technology, yet still has an aggressive presence and full sound while under throttle. This gives your E90/E92 M3 an ideal sound for those that want an aggressive "roar" while driving hard, yet still want a more discrete lower volume for normal cruising. (Please check out the video below for a sound sample on a 2008 M3 coupe).

    Video/Sound Clip: 2008 M3


    As well as the tuned sound and drone eliminating sound, the mufflers on this E90/E92 M3 system use a straight-thru flow design for maximum flow and the least amount of restriction. Decreasing the restrictive back-pressure results in more horse power and torque, as well as the inspired sound this system creates for your M3's 4.0 liter V8 engine. There is no effect whatsoever on emissions, as this system does not replace or inhibit the your M3's factory catalytic converters, so there will not be any "Check Engine" warning lights. Emissions-legal in all 50 states. Made 100% in the USA in Corsa's Ohio facility, this exhaust features a lifetime warranty from the manufacturer. Includes full installation instructions, with detailed photos for easy and straight forward installation. Fits all 2008, 2009, and newer M3 (select your body style below -- coupe, sedan or convertible).

    Applications: 2008-newer M3 (E90 E92 E93)
    Part #: 14563
    Price:   $1,999.00
    Sale Price: $1,699.00
    Savings $300.00

     Options: Choose M3 body style

    Email a Friend
    Headers

    click to enlarge
    		 Acousti/Seal Exhaust System Sealing Compound - 5oz Tube
    With years of experience with dealing with exhaust systems of all kinds, we've found this product to be the BEST at fixing or preventing exhaust leaks. Just apply a light coating of Acousti/seal to pipes, flanges or slip-fit clamps before assembly for a leak free installation. 5 ounce tube (142 grams).
    Applications: 1901-2099 All (All)
    Part #: 35959
    Price:   $16.49

    Email a Friend

    click to enlarge
    		 E90/E92 M3 Test Pipes (Cat Delete)
    On the E90/E92 M3, the stock exhaust headers flow very well while the catalysts present the largest obstacle and power loss. These pipes were designed specifically for race/track use, and offer a cost-effective means of removing the very restrictive catalytic converters on all 2008+ E90/E92 M3. They allow you to make two single cuts to your stock midpipe section, removing the catalytic converters, and clamping the largest diameter straight pipe in their place using the provided high-end/premium exhaust clamps. This eliminates the largest source of exhaust restriction, unleashing AMAZING power gains and a very obvious improvement in acceleration. (Dyno chart shown is with Cat Delete + Stage II Software). Another benefit of these Test Pipes, versus other options, is that they retains as much of your stock system as possible, keeping noise levels tame enough for even the most stringent sound limitations found at many track events (nearly stock sound levels).

    We have done extensive dyno testing on several E9x M3s, starting with our own Project E90 M3, developing a custom tuned Stage 2 Race software specifically for the cat-delete. Time after time, our Dyno has shown HUGE INCREASES IN POWER on each M3 that has received this treatment. When these Test Pipes are combined with our Stage II (Race) software, these make 40hp @ 8000 rpm and 32 lb/ft @ 3000rpm. This (optional) Stage 2 software is also very important in that it allows the cats to be removed without triggering fault codes or putting the engine into limp mode.



    Applications: 2008-- M3 (E90 E92)
    Part #: TEN9046MTP
    Price:   $399.95

    Email a Friend
    People who like this product also like these products:
  • E90/E92/E93 M3 Performance Engine Software - Stage 2 (Race)
  • Acousti/Seal Exhaust System Sealing Compound - 5oz Tube
    		•
    O2 Sensors

    click to enlarge
    		 O2 Sensor Bung and Plug
    O2 Sensor Bung and plug. This weld-in bung allows an O2 sensor to be screwed into your exhaust system. It's required for custom exhaust systems, and is also useful for air/fuel ratio measurements when dyno testing. A threaded plug is included to cap off when not in use. Bung and cap/plug are both 100% stainless steel.
      TMS Oxygen Sensor Bung Specs:
    1. Material 304 stainless steel
    2. 1.00" / 25.4mm OD
    3. 0.50" / 12.7mm Tall
    4. Thread size and pitch M18x1.5
      TMS O2 Sensor Plug & Crush Ring Specs
    1. Material 304 stainless steel
    2. 10mm female hex for install and removal
    3. Thread size and pitch M18x1.5
    4. Copper Crush Ring for leak free installation
       Install Tips
    • Locate bung as close to engine a possible, without exceeding the maximum operating temperature for the O2 sensor. The suggested location is just down-stream of the merge-collector on each bank of cylinders.
    • Sensors located after upstream exhaust system leaks or too close to exhaust outlets are susceptible to poor readings or influence of ambient air
    • O2 Sensors exposed to exhaust gasses with too high amount of un-burnt fuel can lead to misleading readings. A possible lean reading.
    • Locate sensor/bung 90° to exhaust gas stream.
    • Locate sensor/bung in tube with a minimum of 10° up angel to prevent liquid build up in sensor element.
    • Use stainless steel welding wire or rod when installing bung.
    • Do not have bung plug or a oxygen sensor installed when welding bung in place.
    • Welding can distort the bung so it is recommended you chase/tap the threads of the bung after welding.
    • When installing O2 sensor or plug, use an O2 sensor compatible high temperature resistant grease on the threads.
    • Use tightening torque suggested by O2 senor manufacturer.

    Applications: --- - (-)
    Part #: TEN9949O2S
    Price:   $20.00

    Email a Friend
    aFe Cold-Air Intake Kits

    click to enlarge
    		 aFe Dynamic Air Scoops (DAS) for E90/E92/E93 M3, 335i & 328i
    Direct more fresh cool air from your BMW's center/nose grills to your intake, with the aFe D.A.S. (Dynamic Air Scoops). These two "scoops" install behind your front grills to direct more airflow into the factory intake snorkel used on the 2007-2008 328i, 328xi, 335i & 335xi, and 2008+ E90/E92 M3. Scoops are a direct bolt-in install, and include installation instructions and required hardware for a simple install. When combined with a higher flowing filter, such as the aFe stock replacement filter or twin filter system (335i & 335xi), these scoops help get the maximum benefit of a higher efficiency filter by providing more cool, fresh outside air directly into the intake snorkel. Both the 3.0 twin turbo models and the 4.0 V8 models especially need this added air flow for best horsepower and torque.

    These aFe Intake Scoops fit the following BMWs:
    2007-2008 E90/E92/E93 328i & 328xi (coupe, sedan & convertible)
    2007-2008 E90/E92/E93 335i & 335xi (coupe, sedan & convertible)
    2008+ E90/E92/E93 M3 (coupe, sedan & convertible)
    Applications: 2007-- 328i 328xi 335i 335xi M3 (E90 E92 E93)
    Part #: 54-11478
    Price:   $179.95
    Sale Price: $139.95
    Savings $40.00
    Email a Friend
    People who like this product also like these products:
  • aFe Twin-Filter Intake Kit for E82/E88 135i, E90/E92 335i & 335xi, and E60 535i & 535xi
  • aFe SuperStock Intake for E90/E92 M3 (Filter, Intake Scoops & Restore Kit)
  • aFe Filter Restore Kit
    		•

    click to enlarge
    		 aFe SuperStock Intake for E90/E92 M3 (Filter, Intake Scoops & Restore Kit)
    Increase your V8 M3's intake flow by 54%, for a gain of 8 horsepower and 6 lb/ft of torque to the wheels, by upgrading your E90/E92/E93 M3's stock paper intake filter with an aFe High Performance airfilter and the Dynamic Air Scoops (D.A.S.) which install behind the front grills of your M3 to direct more cool air to the intake. The air scoops are a direct fit for the E9x M3, installs simply and easily using common tools (instruction included), and maintains the stock air box for a "stealth" install. Both the air scoops and the filter work in tandem; The high efficiency aFe air filter reduces restriction through the filter, while the Dynamic Air Scoops direct more of the fresh/cool air coming into the nose grills into the intake. More cool air, less restriction, and more precious power.

    This kit includes 1 stock-replacement air filter element, (2) dynamic air scoops (left and right), as well as filter restore kit for cleaning and reconditioning the re-useable filter element (a $12.49 value!).

    This aFe Super Stock Filter & Intake Scoop kit fits the following BMWs:
    2008+ E90 M3 sedan
    2008+ E92 M3 coupe
    2008+ E93 M3 convertible
    Applications: 2008-- M3 (E90 E92 E93)
    Part #: 55-11660
    Price:   $267.50
    Sale Price: $213.95
    Savings $53.55
    Email a Friend
    People who like this product also like these products:
  • aFe Filter Restore Kit
    		•
    Intake Kits and Individual Intake Components

    click to enlarge
    		 CRC Mass Air Flow Sensor Cleaner, 11 Oz Can
    CRC HFM cleaner is specifically developed to clean mass air flow sensors. Increases horsepower & improves air/fuel ratio and MPG. Plastic safe-dries in seconds! Perfect for cars that have had "over-oiled" performance filters installed. Over-oiling can cause the HFM to gum up, this is the perfect solution. This item cannot ship air freight or internationally. UPS Ground shipping to the lower 48 US states only.
    Applications: --- - (-)
    Part #: 05110
    Price:   $8.99

    Email a Friend

    click to enlarge
    		 ITG Foam Filter for Eurosport/Conforti Intake Kits
    Replacement ITG Foam Filter for Conforti Intake Kits. Available in 3" and 3.5" opening (see below for applications) or check your filter box for correct appliaction. Filter comes pre-oiled but oil/cleaner kit is recommended for future maintenance (see link below).

    Applications:
    3.5" (blue box): all Euro HFM kits (E36 M3, MZ3), E46 330, late E46 325, E39 530, E39 540, Z3 3.0
    3.0" (green box): all other models not listed above (E36 M3/MZ3 with stock HFM, E36 325/328, E46 323/328, E39 525/528, Z3 2.3/2.8)
    Applications: --- - (-)
    Part #: JC60/73 / JC60/86
    Price:   $79.95
    Options: Choose Filter Size:
    Options: Include No-Toil Filter Oil?

    Email a Friend


    click to enlarge
    		 No-Toil Foam Filter Oil (for ITG Filters)
    Don't use harsh solvents like gasoline to clean your ITG on your Eurosport/Conforti intake kit (or similar foam filter element). This product is all you need to maintain your ITG foam filter, and is recommend for use with all Conforti Cold-Air Intake Kits.

    When cleaning an ITG foam filter, ITG recommends using warm water and a mild detergent (simple dish soap is fine). Strong detergents and solvents can harm the foam, and cause the filter to break down. Once dirt, dust and debris are rinsed out of the filter, it should be re-oiled to ensure proper function of the filter. ITG recommends No-Toil filter oil, as it is safe to the foam filter media, and is completely waterproof. Drive with more peace of mind through heavy rain and puddles.

    Please note, as this product is an aerosol, it MUST BE SHIPPED BY UPS GROUND. Sorry, this can not be shipped outside of the US/Canda.
    Applications: --- All (All)
    Part #: NTO-(08)
    Price:   $10.95

    Email a Friend
    Genuine Factory BMW Floor Mats

    click to enlarge
    		 Genuine BMW M3 Logo Floor Mat Set for 2006+ 3 Series (E90, E92, E93)
    This is a set of 4 factory BMW anthracite/black floor mats with the iconic "M3" logo embroidered on the front mats. Set consists of 2 front floor mats, and 2 rear floot mats, all matching BMW's anthracite/black carpeting perfectly. as these are Genuine BMW mats, they of course fit your BMW's interior precisely, unlike those "other" non-BMW floor mats. These are made for the new E90/E92/E93 M3 but can be used for any 2006, 2007, 2008 or newer BMW 3 series (**except xi coupes). Available in anthracite (black) color only. Please choose your BMW's body style below.

    The E90/E92/E93 M3 Floor Mats fit the following BMWs::
    2006+ E90 3-Series Sedan including 325i, 330i, 328i 328xi, 335i & 335xi
    2007+ E92 3-Series Coupe including 328i, 335i (**no xi!!)
    2007+ E93 3-Series Convertible including 328i & 335i
    2008+ E90/E92/E93 M3 including E90 M3 sedan, E92 M3 coupe & E93 M3 convertible/cabrio.

    Please select your body style below (mats come in black only).
    Applications: 2008-- M3 325i 328i 330i 335i (E90 E92 E93)
    Part #: 82110444697 (82 11 0 444 697)
    Price:   $130.00
    Sale Price: $113.40
    Savings $16.60

     Options: Choose body style

    Email a Friend
    Pedal Sets

    click to enlarge
    		 Turner Motorsport Racing Aluminum Pedal Set (E30/E36/E46/E90/E92 3 Series Manual Transmission)
    These aluminum pedals were designed with one thing in mind -- performance. We wanted a pedal set that gave us the grip EXACTLY where we wanted it: MASSIVE GRIP on the brake and clutch pedals, and far less grip on the accelerator to allow the right foot to better slide/move during heal-toe braking. This set surpasses all others in this area, giving your BMW's foot operated controls a more tactile feel and response. The brake and clutch pedals feature pyramid shaped spikes, which actually BITE the soles of your shoes PERFECTLY, creating the ultimate (and unbeatable) friction surface.

    These pedals are 100% MADE IN THE USA, and are CNC machined from aircraft quality aluminum billet to perfectly fit your 3 series BMW. There's no rubber to wear out, and no cosmetic finishes to chip or flake off. Stainless steel hardware is included, as well as a basic installation guide (professional installation always recommended). These pedals are for manual transmission BMW's only.

    Now available in (optional) black anodized! The same shoe-gripping performance as our standard "naked" aluminum racing pedals, but with an added black anodized coating, for a stealth black finish. We always recommend the naked metal pedals for harsher/race type use, as all cosmetic finishes will eventually degrade over time. But for those looking for the black-out look, we can now accommodate! To add this option, simply choose your selection below.

    These aluminum racing pedals fit the following BMWs:
    1984-1991 E30 3 Series - 318i, 318is, 325, 325e, 325es, 325i, 325is, 325ix
    1989-1995 E34 5 Series - 525i, 530i, 535i, 540i
    1992-1998 E36 3 Series - 318i, 318is, 325i, 325is, 328i, 328is, 323is
    1995-1999 E36 M3 including 3.0 and 3.2 liter M3
    1999-2005 E46 3 Series - 323i, 323Ci, 328i, 328Ci, 325i, 325Ci, 325xi, 330i, 330Ci, 330xi
    2001-2006 E46 M3 coupe & convertible (SMG uses only one brake/clutch pedal)
    2006+ E90/E92 3 Series - 325i, 325xi, 328i, 328xi, 330i, 330xi, 335i, 335xi
    2008+ E90/E92 M3 - M3 coupe, sedan & convertible (DCT uses only one brake/clutch pedal)
    Applications: 1984-2010 318 323 325 328 330 335 M3 (E30 E34 E36 E46 E90 E91 E92 E93)
    Part #: TMS-3-PEDAL-SET
    Price:   $129.95
    Sale Price: $109.95
    Savings $20.00

    Options: Add black coating?
    Options: Add footrest?

    Email a Friend

    click to enlarge
    		 Original BMW Aluminum Footrest/Dead Pedal for E46/E90/E91/E92/E93 3 series and E82 1 series
    Matches the pedals featured above. Kit comes complete with dead pedal, necessary hardware and drilling template. This is an Original BMW Kit. Fits LHD Cars Only!
    Applications: --- 128i, 135i, 323i, 325i, 328i, 330i, 335i, M3 (E46 E82 E90 E91 E92 E93)
    Part #: 51470027792 (51 47 0 027 792)
    Price:   $74.95

    Email a Friend

    click to enlarge
    		 E46 & E90/E91/E92/E82 Original BMW Aluminum Pedal Set - Manuals & SMG Transmission
    Added comfort, and pedal control plus a great look for your E46 & E90/E91/E92 3 series or E82 1 series LHD BMW. Brushed aluminum and raised rubber pads. Fits 5/6-speed manual and SMG-equipped cars. Kit comes complete with new gas pedal, brake & clutch pedal (not necessary for SMG), as well as mounting hardware and drilling template. This is an Original BMW Kit. (Also sometimes listed as BMW part# 35000304642 / 35-00-0-304-642) Note: does not include dead pedal (that is part # 51470027792, for E46 E90 E91 E92)
    Applications: --- 128i 135i 325i 328i 330i 335i M3 (E46 E90 E91 E92 E39 E82)
    Part #: 35000006949 (35 00 0 006 949)
    Price:   $114.95
    Sale Price: $99.95
    Savings $15.00


    Email a Friend
    People who like this product also like these products:
  • Original BMW Aluminum Footrest/Dead Pedal for E46/E90/E91/E92/E93 3 series and E82 1 series
  • E46 & E90/E91/E92/E93 Original BMW Aluminum Pedal Set - Automatic Trasmission
    		•
    MOMO Steering Wheels & Hubs

    click to enlarge
    		 MOMO Steering Wheel Hub Adapter for E46 & E90/E92 3 Series
    This hub adapter allows installation of a MOMO steering wheel (or any steering wheel that uses the same 6 bolt pattern / specs of a MOMO, including most Sparco wheels) to an E46 or E90/E92 3 series, 1999 and newer. Includes everything pictured -- hub, slip ring, and hardware.

    Fits the following BMWs:
    1999-2005 E46 3 series: including 323i, 323Ci, 325i, 325xi, 325Ci, 328i, 328xi, 330i, 330xi, 330Ci
    2001-2006 E46 M3
    2006+ E90/E91/E92/E93 3 Series including 325i, 325xi, 328i, 328xi, 330i, 330xi, 335i, 335xi (all sedans, coupes, wagons & convertibles)
    2008+ E90/E92/E93 M3 (including M3 sedan, coupe & cabrio)
    Applications: 1999-2009 M3 325i 328i 328xi 330i 330xi 335i 335xi (E46 E90 E92)
    Part #: 2012
    Price:   $72.00

    Email a Friend
    Steering Wheels (Genuine BMW and more)

    click to enlarge
    		 BMW Performance Steering Wheel for E90/E92/E93 3 Series & E82 1 Series
    In stock now! Hands down, the coolest, most advanced BMW steering wheel ever produced! The computerized BMW Performance steering wheel has lots of tricks up it's sleave, including built in progressive LED shift light indicators, a lap timer (with programmable track sections), G-force display (both lateral & forward g's), and coolant & oil temp displays. It has two "hidden" buttons, both located at the thumb positions for controlling the wheels internal functions.

    Not only is this wheel packed with technology, but it also looks and feels incredible. It features the thick and "chunky" feel of the M3 steering wheel, covered in beautiful alcantara suede leather combined with standard black leather and attractive contrasting white stitching. The wheel does not include an airbag, but all cars that came with the round "sport" style airbag have a compatible and interchangeable airbag. The wheel also does not include the center trim (the area the radio / cruise control buttons attach too), so you can either re-use your stock center trim piece OR purchase a matching alcantara suede trim piece (select your option below). The wheel includes basic instructions for installation but professional installation by BMW-certified techs is required. Includes wiring, instructions, slip ring and owners manual. Please select your options below (with SMG shifter paddles or without, and whether you'd like the matching suede center trim).

    The BMW Performance Steering Wheel fits the following BMW's:
    2006+ E90 3 Series Sedan including 325i, 325xi, 328i, 328xi, 330i, 330xi, 335i, 335xi and E90 M3
    2007+ E92 3 Series Coupe including 328i, 328xi, 335i, 335xi & E92 M3 **NOT FOR CARS WITH DCT / DUAL CLUTCH SEQUENTIAL GEARBOX**
    2008+ E82/E88 1 Series including 128i & 135i coupe & convertible
    Applications: 2006-- 128i 135i M3 330i 330xi 328i 328xi 335i 335xi (E82 E88 E90 E91 E92 E93)
    Part #: 32300443170 (32 30 0 443 170)
    Price:   $1,400.00
    Sale Price: $1,199.95
    Savings $200.05

    Options: Add matching suede trim?
    Options: Is your car SMG/paddle shift?

    Email a Friend

    click to enlarge
    		 E9x BMW Performance 'Rennsport' Steering Wheel
    This is the coolest steering wheel we have ever seen from BMW. Hardcore racing drivers and enthusiasts will recognize right away the features of this wheel are intended for maximum control, feel, and function during spirited driving.

    This is a factory BMW Performance wheel that we have dubbed the 'Rennsport' wheel. This is the basic wheel behind the the famous Performance wheel but without the data display, shift lights, and other doo-dads. It's been reduced to the simplest form by BMW's motorsport-oriented engineers to be a functional element in the driving experience and not only a place to rest your hands.

    This wheel is covered in alcantara suede with white stitching. It's the same thickness and shape as the factory M3 wheel. The bottom section of the rim has been flattened to allow more thigh room and a better grip when making turns of the wheel past 90 degrees. Flat bottom wheels can be found on the world's highest-performing cars and it's the first time we have seen BMW offer this style as a factory accessory. A reference mark on the top of the rim indicates top dead center of the steering. This mark is common on rally cars and drift cars to let the driver know when the steering wheel is back straight-ahead, without having to look away from the road.

    This wheel replaces the sport or M3 steering wheel. It re-uses the stock sport wheel airbag or M3 airbag (not included) and the stock sport wheel cover or M3 wheel cover (not included, see below for options). Photo above shows this wheel assembled with airbag and cover (not included). It works with manual transmission cars only.

    This Genuine BMW 'Rennsport' Performance Steering Wheel fits the following BMWs:
    2007+ E90/E91 3 Series Sedan 328i, 328xi, 335i, 335xi **WITH sport package AND WITHOUT paddle shift
    2007+ E92/E93 3 Series Coupe/Convertible 328i & 335i **WITH sport package AND WITHOUT paddle shift
    2008+ E90/E92/E93 M3 coupe & convertible with 6 speed manual (no DCT)
    2008+ E82/E88 1 Series 128i & 135i ** WITH sport package airbag
    Applications: 2007-- 128i 135i 328i 328xi 335i 335xi M3 (E82 E88 E90 E92 E93)
    Part #: 32302157307 (32 30 2 157 307)
    Price:   $920.00
    Sale Price: $735.00
    Savings $185.00

     Options: Add BMW steering wheel cover?

    Email a Friend
    People who like this product also like these products:
  • M3 Steering Wheel Trim / Front Fascia - E9x & E8x with Sport Wheel
  • Genuine BMW Shift Knob - Performance Edition (Available in 5 & 6 Speed)
    		•

    click to enlarge
    		 E90/E92 M3 Steering Wheel - Fits all E90/E92 3 Series
    Upgrade your non-M E90/E92 3 series "sport" steering wheel to the the M3 steering wheel, which features sportier styling, thicker diameter hand gripping surface, and tri-color M stiching around the inside. The M3 wheel feels much more substantial and "meatier", thanks to the added thickness and well contoured thumb grips. This is the Genuine BMW steering wheel that comes on 2008 M3 (6 speed manual transmission). This price also includes the front fascia (with motorsport M emblem, a $93 item) but does NOT include airbag. The airbag must be re-used from your stock "sport" steering wheel, so you'll want to check your existing airbag to make sure you have the round "sport" airbag. If you do not have the sport airbag already, you would have to purchase a new one in order to use this steering wheel.

    This E90/E92 M3 steering wheel will fit all 2006 325i, 325xi, 330i, 330xi (with sport package steering wheel) and all 2007 and newer 328i, 328xi, 335i & 335xi coupe and sedan (with sport package steering wheel).

    Applications: 2006-- 325i 325xi 328i 328xi 330i 330xi 335i 335xi M3 (E90 E91 E92 E93)
    Part #: 32302283733 (32 30 2 283 733)
    Price:   $684.20
    Sale Price: $639.00
    Savings $45.20
    Email a Friend

    click to enlarge
    		 M-Technic Steering Wheel for E9x & E8x w/ Round Sport Airbag
    This is a RARE Genuine BMW M-Technic steering wheel, which features perforated leather at the 9 and 3 o'clock positions, smooth leather at the 12 and 6 o'clock positions, and black stitching along the inside edge. This wheel has the same diameter and thickness as the E90/E92/E93 M3, and can be used on all non-paddle shift E90 and E92 which already have the rounded "sport package" airbag. On a non-M3, this wheel makes a huge improvement in both look and feel, giving your non-M the beefy hand grip thickness the M3s come with from the factory.

    The attractive European style perforated leather not only looks great/unique, it also feels simply superb in your hands. This M-Tech steering wheel can be used to either upgrade the look and feel on a 2008+ M3, or for upgrading a non-M 3 series or 1 series, as long as your 3 series / 1 series is a 2007 or newer, and already has the compatible round "sport package" style airbag (see photo). You must reuse your existing airbag, and it MUST be the round style which came on the sport package models). Airbag is not included. Not compatible with paddle shift SMG/DCT models.

    This item is the steering wheel only, and does not include the airbag or front fascia. You may add a new "M" style front trim panel, as pictured, for an additional charge, or you may reuse your current front fascia. If you opt to add the ///M trim panel, you must reuse the multi-function button panels as the trim panel does not include the button/switch units.

    This Genuine BMW M-Technic Steering Wheel fits the following BMWs:
    2007+ E90/E91 3 Series Sedan 328i, 328xi, 335i, 335xi **WITH sport package AND WITHOUT paddle shift
    2007+ E92/E93 3 Series Coupe/Convertible 328i & 335i **WITH sport package AND WITHOUT paddle shift
    2008+ E90/E92/E93 M3 coupe & convertible with 6 speed manual (no DCT)
    2008+ E82/E88 1 Series 128i & 135i ** WITH sport package airbag
    Applications: 2007-- 328i 328xi 335i 335xi M3 (E90 E91 E92 E93)
    Part #: 32307839114 (32 30 7 839 114)
    Price:   $429.95
    Options: Add ///M Front Fascia?

    Email a Friend
    People who like this product also like these products:
  • M3 Steering Wheel Trim / Front Fascia - E9x & E8x with Sport Wheel
    		•

    click to enlarge
    		 M3 Steering Wheel Trim / Front Fascia - E9x & E8x with Sport Wheel
    This is the Genuine BMW steering wheel trim that comes on all 2008+ E90/E92/E93 M3, a factory original part. It can also be installed on all 2007+ 3 series and 1 series that have the "sport package" steering wheel (distinguished by the round style airbag). Features iconic motorsport "M" emblem on the front.

    This fascia / trim panel is only for cars that have the multi-function controls, and you must reuse the button / switch panels from your existing multi-function steering wheel. If you are either refreshing your E9x M3's scratch face plate, or upgrading to an M3 or M-Technic style wheel, this front trim panel is a great way to complete the job.

    Applications: 2007-- M3 (E90 E92 E93 E82 E88)
    Part #: 3230784158
    Price:   $129.00
    Sale Price: $110.00
    Savings $19.00
    Email a Friend
    Accessories

    click to enlarge
    		 BMW Motorsport Seat Belt Shoulder Pad Set
    These original BMW Motorsport shoulder pads fit over any street car seat belt or 2" harness belt. A zippered side makes these super easy to install on any car. High quality "BMW MOTORSPORT" embroidery will set your car apart from the rest. Also available in 76mm (3") harness width. Set includes two shoulder pads.
    Applications: --- All (All)
    Part #: MSBELT50MM
    Price:   $184.06
    Sale Price: $99.95
    Savings $84.11

     Options: Choose Width:

    Email a Friend

    click to enlarge
    		 Racing Seat Belt Harness Retaining Guide Collars (Pair)
    These little guys are one of our favorite final touches on a race car build. After years of requests, we now are able to supply these for more than just our race team's use. These aluminum collars bolt on your roll cage's harness bar (or any bar for that matter) and help keep your seat belt harnesses from sliding on the bar. You can use just one pair to accomplish this, or 2 pairs (4 collars total) for the best looking and functioning install. The beauty of these collars (besides being lightweight and looking clean) is that they can be adjusted from side to side, which is convenient if you change you seat or belt configuration. They can also be used for other applications as well, such as taming that helmet net strap (as pictured). If you're looking for a clean, professional looking solution, these are a superb final touch. As used on our own Championship winning TMS E46 and E90 race cars.

    We offer these guide collars in two sizes: for 1.5" OD roll bar tubing or for 1.75" OD roll bar tubing (choose your size below). These are sold by the pair, so be sure to modifying your quantity below (or in the cart) if you need more than 2.

    Applications: --- All (All)
    Part #: TIN9903150
    Price:   $39.95
    Options: Choose roll bar diameter

    Email a Friend
    Clear Euro Parking Lights & Clear Euro Tail Lights

    click to enlarge
    		 Euro Headlight Switch - E90/E92 3 Series & E82/E88 1 Series
    Want rear fog lights on your E90/E92 3 Series or 1 Series? It doesn't get much easier than this! Simply replace your stock US headlight switch with the Euro Headlight switch (which has the rear Fog light switch yours lacks) and VOILA -- working rear fog lights! This installs in a half hour or less, and is a direct swap for the stock/US headlight switch. Works on cars with Xenon/HID headlights, foglights, and rain sensor ONLY.

    This headlight swtich w/ rear fog light switch fits:
    2006+ E90 3 Series Sedan including 325i, 325xi, 330i & 330xi
    2007+ E92 3 Series Coupe including 328i, 328xi, 335i & 335xi
    2007+ E93 3 Series Convertible including 328i & 335i
    2008+ E82/E88 1 Series including 128i & 135i coupe & convertible
    2008+ E9x M3 sedan, coupe & convertible
    *** (All of the above cars must be equipped with Xenon/HID headlights, foglights, and rain sensor for this switch to be compatible).
    Please note: As this switch enables the rear fog lights, lighting which was not originally included on US specification models, this headlight switch is sold exclusively for OFF ROAD / RACING USE ONLY.
    Applications: 2006-- 128i 135i 325i 328i 328xi 330i 330xi 335i 335xi M3 (E82 E88 E90 E91 E92 E93)
    Part #: 61316932796 (61 31 6 932 796)
    Price:   $159.00

    Email a Friend

    click to enlarge
    		 E90 Genuine BMW Sedan Blackline Smoked Tail Light Kit - 4 Piece
    These E90 tail lights have a slightly smoked look, and give your 2006 to 2008 3 series sedan a very clean look, setting it apart from other E90's. These fit E90 M3 sedan as well! Genuine BMW, so you know they are the highest quality. We include silver coated bulbs for the turn signals, this helps eliminate that "Fried Egg" look you get when using normal yellow bulbs. This is a 4 piece kit, which includes the two outer tail light lamps and the 2 inner parts which mount to the trunk lid. These tail lights fit all 2006 and newer 3 series 4 door sedan, including 325i, 325xi, 328i, 328xi, 330i, 330xi, 335i, 335xi and 2008+ E90 M3
    Applications: 2006-2008 325i 325xi 328i 328xi 330i 330xi 335i 335xi M3 (E90)
    Part #: 63210406678 (63 21 0 406 678)
    Price:   $348.95
    Sale Price: $309.95
    Savings $39.00
    Email a Friend
    Headlight Assemblies

    click to enlarge
    		 Liquid Resin Headlight Polish & Restoration Kit
    If your car has acrylic / plastic headlight lenses, they may have developed a hazy, cloudy, or yellowed appearance caused by the suns UV rays and thousands of miles of road exposure. This hazing and yellowing not only gives your vehicle a very poor appearance, it also reduces the effectiveness of your headlights and impairs night-time visibility causing and unsafe situation. This kit can restore your headlights to their original clear and bright look, and ensure your night-time visibility is as effective as it should be. A complete do-it-yourself kit, which includes an instructional DVD and laminated simple step chart.

    Not just a polish! This kit includes the tools to simply and easily polish the surface of your acrylic plastic headlights, but unlike many other kits that are similarly advertised, it also includes a UV blocking clear coat solution. This clear coat solution is the crucial final step, ensuring perfectly clear lenses, as well as blocking harmful UV rays to keep your headlight lights clear and bright for years to come.

    This headlight restoration kit is perfect for the following vehicles:
    *** ANY vehicle with acrylic plastic headlight lenses! ***
    1995-2001 E38 7 Series
    1997-2003 E39 5 Series
    1999-2005 E46 3 Series
    2006+ E9X 3 Series
    2004+ E60 5 Series
    2002+ E65/E66 7 Series
    2003+ X3 SAV
    2000+ X5 SAV
    Applications: 1992-2019 All (All)
    Part #: LIQUIDRESIN
    Price:   $137.16

    Email a Friend
    Stealth Silver Directional Bulbs

    click to enlarge
    		 Stealth Bulb Set - Dual Filament Front for Most BMW Models up to 2001
    Stealth Bulb Set - Dual Filament Front for Most BMW Models up to 2001. These are the are the best concealment bulbs on the market; invisible in clear lenses when off and bright amber when on. No more ugly orange egg yolk look in your clear corners. Check your stock bulb and compare to photo before ordering.
    Applications: 1980-2001 - (-)
    Part #: SBCA 7528
    Price:   $29.95

    Email a Friend

    click to enlarge
    		 Stealth Bulb Set - Single Filament Front & Rear For BMW with Straight Across Pins
    Stealth Bulb Set - Single Filament Front & Rear For BMW with Straight Across Pins. Fits most newer 2001 and up E46 front and other BMW models in both front and rear. These are the are the best concealment bulbs on the market; invisible in clear lenses when off and bright amber when on. No more ugly orange egg yolk look in your clear corners. Check your stock bulb and compare pins to photo before ordering.
    Applications: 1980-and up - (-)
    Part #: SBCA 7506
    Price:   $29.95

    Email a Friend

    click to enlarge
    		 Stealth Bulb Side Marker Bulbs (Set)
    Stealth Bulb Side Marker Bulbs (Set). Fits most BMW side marker indicators. No more ugly orange egg yolk look in your clear corners. Check your stock bulb and compare to photo before ordering.
    Applications: 1989-and up - (-)
    Part #: SBCA 194
    Price:   $29.95

    Email a Friend

    click to enlarge
    		 Stealth Bulb Set -Single Filament Front & Rear for BMW with Offset Pins
    Stealth Bulb Set -Single Filament Front & Rear for BMW with Offset Pins. These are the are the best concealment bulbs on the market; invisible in clear lenses when off and bright amber when on. No more ugly orange egg yolk look in your clear corners. Check your stock bulb and compare to photo before ordering.
    Applications: 1999-and up - (-)
    Part #: SBCA 7507
    Price:   $29.95

    Email a Friend
    K&N Performance Air Filters

    click to enlarge
    		 K&N Recharger Kit
    Cleaning and re-oiling your K&N filter will prolong its life and maintain K&N's performance adavantage. You should clean your filter every year with water and K&N's cleaning solution and re-oil the filter every two years. K&N air fitlers come pre-oiled.
    Applications: 1969-2002 all (all)
    Part #: 99-5000
    Price:   $12.95

    Email a Friend
    Synthetic Lubricants & Coolant

    click to enlarge
    		 BMW Antifreeze Coolant, 1 Gallon Jug
    The use of Original BMW Anti-Freeze/Coolant will ensure sufficient cooling in summer and protection against freeze-ups in winter. BMW Antifreeze/Coolant will also guard your vehicle's various engine components against corrosion.

    BMW Anti-Freeze/ Coolant will prevent excessive silicate gel precipitation, which may cause plugging of the cooling system and lead to more extensive repairs. For proper maintenance we recommend that your BMW's cooling system be drained and refilled every two years with Original BMW Anti-Freeze/Coolant. It was developed to be compatible with BMW's aluminum radiators, and is nitrite- and phosphate-free to prevent excessive silicate build-up.

    Note that most BMW cooling systems take 8+ liters of a 50/50 mix of BMW coolant and distilled water. BMW sells this coolant in 1 gallon jugs (1 gallon = 3.79 liters), so plan accordingly.
    Applications: --- - (-)
    Part #: 82141467704 (82 14 1 467 704)
    Price:   $19.25

    Email a Friend
    Car Care & Accessories

    click to enlarge
    		 Wurth Rubber Care (Gummi Pflege)
    Wurth Rubber Care Gel Stick (75ml) is the same as Gummi Pflege Rubber Maintenance Stick that is no longer available from BMW, BMW Part # 82149407015 (82 14 9 407 015) just in liquid form with a foam applicator instead of a messy gel.

    Perfect for protecting and revitalizing rubber seals such as sunroof, door and engine compartment seals. Silicone free, resistant to dilute acids, alkalis, spray and salt water. Does not attack painted or chrome plated parts. Comes with a foam applicator tip for easy application and less wasted product.
    Applications: --- - (-)
    Part #: 08930128
    Price:   $14.95
    Sale Price: $12.95
    Savings $2.00
    Email a Friend

    click to enlarge
    		 Zep 40 Non-Streaking Multi-Purpose Cleaner - 24oz can (**UPS GROUND ONLY)
    This is perhaps one of the most used products around the Turner Motorsport shop. We find this cleaner great for most everything, and love that it does not leave behind any film or residue. Cleans any surface not harmed by water. This is one (large) 24 ounce aerosol can. **UPS Ground shipping only!**

    Full Description: A heavy-duty, aerosol glass cleaner for non-conductive surfaces. Fortified formula contains powerful solvents, wetting agents, and ammonia to handle difficult cleaning tasks. Contains no phosphates or fluorocarbon repellants.

    Ideally suited to remove soil, smudges, and streaks from non-conductive surfaces such as show-cases, doors, table tops, desks, mirrors, enamel surfaces, chrome, stainless steel, tile and windshields. Designed especially to eliminate low-temperature streaking problems on glass during the winter months.

    DIRECTIONS: Spray surface and wipe clean. Polish with a clean, dry cloth or paper towel. Repeat as necessary.
    Applications: --- - (-)
    Part #: 0144
    Price:   $9.95

    Email a Friend
    People who like this product also like these products:
  • Zep Brake parts Cleaner (Brake Clean) 20oz Can (**UPS GROUND ONLY)
    		•

    click to enlarge
    		 Zep Brake parts Cleaner (Brake Clean) 20oz Can (**UPS GROUND ONLY)
    If you're dealing with brake parts, you know you'll be working with dirty, grimey, rusty, crusty parts. Be prepared and have the right cleaner on hand in your garage. We've found the Zep Brake Cleaner to be the best, and use it in our own shop. Every tool box in our championship-winning race shop has a can. Use whenever inspecting or replacing brakes. Use on master cylinders, brake drums, wheel cylinders, disc brakes pads, brake linings, andreturn springs. Also useful for light duty degreasing applications.

    Zep Brake Parts Cleaner is a convenient, fast-acting aerosol specifically designed for cleaning brake parts. A blend of powerful, non-combustible safety solvents. It is highly effective at washing away grease, oil, brake fluid, and impacted dust without affecting metal. It is also fast evaporating, leaving no residue behind. Best of all it's safe around brake parts, and will not affect brake operation. Contains no trichlorethane or other Ozone Depleting Compounds. Product is non-flammable by CSMA Flame Extension Test Method. Can be used to clean a variety of metal parts and machinery.
    Applications: --- - (-)
    Part #: 0184
    Price:   $10.95

    Email a Friend
    People who like this product also like these products:
  • Zep 40 Non-Streaking Multi-Purpose Cleaner - 24oz can (**UPS GROUND ONLY)
    		•

    click to enlarge
    		 BMW Advanced Battery Charging System
    If you park your car for any extended period of time you need this little unit to keep the battery charged. Plug it in and you're all set! 1.25 Amp battery charger designed to fully charge and maintain a battery at a proper storage voltage without the damaging effects caused by trickle chargers. The new BTP micro-chip technology applies the correct peak charge, then automatically maintains the battery at the perfect float voltage which virtually eliminates battery destroying sulfation! Temperature compensation ensures optimal charge voltage even in extreme weather conditions. Powder coated aluminum chassis. Spark Proof! Reverse polarity protection ensures safety. Built in 72 hour timer will protect a marginal battery from over charging.
    Applications: --- all (All)
    Part #: 82110026663 (82 11 0 026 663)
    Price:   $69.95

    Email a Friend

    click to enlarge
    		 Loctite 262 (Red) Threadlock - 0.5 ml tube
    If you are a do-it-youself, or do much wrench turning, then you know about Loctite. You also know a little goes a long way. This small tube of Loctite Red 262 Threadlock is perfect for that small job -- or a few small jobs! This tube has 0.5 mL (0.02 fluid ounces) or red 262 thread sealant, and is resealable. There are just too many different uses for Loctite, and no mechanic or DIY should be without some in his or her toolbox.
    Applications: --- All (All)
    Part #: 26205
    Price:   $2.99

    Email a Friend

    click to enlarge
    		 P21S Gel Wheel Cleaner
    P21S is basically the best wheel cleaner available. The famous German-made factory approved way to remove corrosive brake dust from alloy wheels. Safe, pH controlled, non-acid, non-lye based, formulas are guaranteed not to attack any type of road wheel, braking system or other automotive surface. While more costly to buy than the typical corrosive wheel cleaner found in discount houses, P21S Wheel Cleaner can be significantly cheaper to use over the long run, based on the surface safety they offer. This Regular Formula Cleaner is best for normally soiled wheels that typically receive frequent cleaning. Spray on - touch stubborn spots with a sponge and rinse off with a sharp stream of water. Available in a 500ml bottle. Includes spray nozzle and sponge for hard to reach areas.
    Applications: --- All (All)
    Part #: 10404
    Price:   $15.49

    Email a Friend

    click to enlarge
    		 Wurth Brushable Adhesive Seam Sealer - 1 Quart Can
    This brushable adhesive seam sealer is what we use here at Turner Motorsport on our championship winning BMW race cars. Made by Wurth, the acclaimed tool and product maker, it's flexible, won't crack, shrink, harden or sag. It's also waterproof and insulates. It's great for sealing cracks, crevices and body seams. It's ready to paint after only 45 minutes of curing/drying time. 1 quart (32oz) can.
    Applications: --- All (All)
    Part #: 08901021
    Price:   $44.00
    Sale Price: $37.05
    Savings $6.95
    Email a Friend

    click to enlarge
    		 Zep-o-Shine Car Wash with Polymer Wax - 1 gallon
    ZEP-O-SHINE is a premium grade concentrated car wash. It is a highly concentrated product that literally "pries-off" dirt. Sensationally fast and economical too, it contains a special polymer wax which leaves the finish with that brighter, newer look. After the surface is dry, rubbing gently with a soft cloth produces an even glossier sheen. ZEP-O-SHINE washed finishes are more weatherproof. Phosphate free!

    Directions:
    Dilute 1 to 3 ounces ZEP-O-SHINE per gallon of water. Place the proper amount of ZEP-O-SHINE in a handy container, add the water in a strong stream to produce suds. Wash the car as usual, dry with a soft cloth rubbing gently to a rich glossy sheen.

    BIODEGRADABLE: All detergents used in the manufacture of this product are biodegradable.
    Applications: --- All (All)
    Part #: 0382
    Price:   $39.95
    Sale Price: $32.36
    Savings $7.59
    Email a Friend
    Reset Tools

    click to enlarge
    		 Peake Research AB03 Adaptor
    Adapts R5/FCX-II and 'SRS tools to work on cars made after year 2000.
    Applications: --- - (-)
    Part #: AB03
    Price:   $69.95

    Email a Friend

    click to enlarge
    		 Peake Research Service Indicator Reset Tool (most BMWs from 1977)
    Reset your inspection and oil change indicator lights on your dashboard without going to the dealer! A must for the weekend mechanic. Available for most BMW models.
    Applications: 1977-1999 all (all)
    Part #: BM20
    Price:   $59.00
    Options: Choose Year of Car:

    Email a Friend

    click to enlarge
    		 Peake Research Late to Early Reset Tool Adapter
    AB02 Adaptor by Peake Research. Late to Early Adaptor: Allows the R5 FCX-II and FCX-III tool to fit BMW's built prior to 1987 for service light reset.
    Applications: 1982-1987 - (All)
    Part #: AB02
    Price:   $69.95

    Email a Friend

    click to enlarge
    		 Peake Research R5 FCX-III Fault Code Reader (most BMWs up to 2006)
    BMW owners should have a great interest in the R5 FCX-III tool. The BMW's Check-Engine light can mean any number of things. Sometimes it's alerting you to the real need for a repair, but very often it is merely indicating one of the many, simple (top off your coolant) type problems. Tool resets the Check Engine, Service and Oil Change indicator dashboard lights. Easy to use and includes a booklet containing the fault code chart and instructions for use.

    Will not work on the following vehicles: E30 M3, E30 325e, 2000 750iL. This unit plugs into the round port under the hood on cars up to 2000. You can use this on 2001 and later cars with the AB03 Adapter. See below.
    Applications: 1987-2006 all (all)
    Part #: FCX
    Price:   $148.95
    Sale Price: $139.95
    Savings $9.00

     Options: Add any adapters?

    Email a Friend
    People who like this product also like these products:
  • Peake Research Late to Early Reset Tool Adapter
  • Peake Research AB03 Adaptor
    		•

    click to enlarge
    		 Peake Research R5 FCX3-16 Fault Code Reader (most BMWs 2001-2006)
    Now available for newer 2001-2006 BMWS!!! These is the new and latest version of this well-known BMW fault code reading tool. This updated version solves previous incompatibilities (which effected some BMW models), as well as covers more BMWs. Now works on 2003-2006 BMW models!

    BMW owners should have a great interest in this tool. Your BMW's Check Engine light (or "Service Engine Soon" light) can mean any number of things. Sometimes it's alerting you to the real need for a repair, but very often it is merely indicating one of the many, simple (top off your coolant) type problems. Also resets Service and Oil Change indicator dashboard lights. Easy to use and includes a booklet containing the fault code chart and instructions for use.

    KNOWN EXCEPTIONS / POTENTIAL INCOMPATIBILITIES:
    2002+ 745Li w/ iDrive;

    Applications: 2001-2006 All (All)
    Part #: FCX2-16
    Price:   $139.95

    Email a Friend

    click to enlarge
    		 Peake Research R5 FCX3-16 Fault Code Reader (most BMWs 2001-2006)
    Now available for newer 2001-2006 BMWS!!! These is the new and latest version of this well-known BMW fault code reading tool. This updated version solves previous incompatibilities (which effected some BMW models), as well as covers more BMWs. Now works on 2003-2006 BMW models!

    BMW owners should have a great interest in this tool. Your BMW's Check Engine light (or "Service Engine Soon" light) can mean any number of things. Sometimes it's alerting you to the real need for a repair, but very often it is merely indicating one of the many, simple (top off your coolant) type problems. Also resets Service and Oil Change indicator dashboard lights. Easy to use and includes a booklet containing the fault code chart and instructions for use.

    KNOWN EXCEPTIONS / POTENTIAL INCOMPATIBILITIES:
    2002+ 745Li w/ iDrive;

    Applications: 2001-2006 All (All)
    Part #: FCX3-16
    Price:   $139.95

    Email a Friend
    Tools

    click to enlarge
    		 Clutch Alignment Tool
    Clutch Alignment Tool. Choose model from the list below. A must when installing a new clutch!
    Applications: --- All (All)
    Part #: TLS-33
    Price:   $8.95
    Options: Choose Your Car

    Email a Friend

    click to enlarge
    		 Tool - 27mm 1/2 Drive 6-point Socket
    This socket fits the head of the N52/N54 oil filter wrench (part# 83300493936). If you are doing your own oil changes, you will want this socket to go with the oil filter housing cap removal tool.
    Applications: --- All (All)
    Part #: TMI9910M27
    Price:   $27.00

    Email a Friend
    People who like this product also like these products:
  • N52/N54 Oil Filter Tool
    		•

    click to enlarge
    		 Tool - 30mm 3/4 Drive 12-point Socket
    30mm socket, commonly used for the removal and installation of rear wheel bearings on many BMWs. This socket works with the rear wheel bearing nut (axle nut) with BMW part number 41 1 132 565-- used on the following BMWs:

  • E36 3 series (1992-1999) -- no M3
  • E46 323/325 (1999-2005) -- no 330/M3

    •
    Applications: --- All (All)
    Part #: TMI9910M30
    Price:   $34.90

    Email a Friend

    click to enlarge
    		 Tool - 36mm 3/4 Drive 12-point Socket
    36mm socket, commonly used for the removal and installation of rear wheel bearings on many BMWs. This socket works with the rear wheel bearing nut (axle nut) with BMW part number 33 41 1 133 785 -- used on the following BMWs:

  • E36 M3 (1995-1999)
  • E38 7 series (1995-2001)
  • E39 5 series (1997-2003)
  • E46 330i and M3 (2001-2005)
  • MZ3 M Roadster/Coupe (1998-2002)
  • E31 8 series
  • X5
  • Z8

    Applications: --- All (All)
    Part #: TMI9910M36
    Price:   $39.95

    Email a Friend

    • click to enlarge
    		 Tool - 46mm 3/4 Drive 6-point Socket
    Commonly used for the removal and installation of front wheel bearings on many BMWs. This socket works with the wheel bearing nut with BMW part number 31 21 1 128 336 -- used with the following front wheel bearings:

    Front Wheel Bearings that use 31 21 1 129 336 nut:
    BMW part# Fitment / Chassis
    31 21 1 468 753 E30 M3 (1988-1991), E24 6 ser (thru 1989)
    E28 5 ser (1982-1988)
    31 22 6 757 024
    31 22 1 468 926    		 E36 3 ser, including M3 (1992-1999)
    E46 3 ser, except M3 (1999-2005)
    E32 7 ser (1988-1994)
    E34 5 ser (11/1991-1995)
    E31 8 series (3/1992 on)
    31 22 2 229 501 E46 M3 (2001-2006)

    Applications: --- All (All)
    Part #: TMI9910M46
    Price:   $68.95

    Email a Friend
    Red Line Synthetic Engine Oil

    click to enlarge
    		 Red Line 10W30 Synthetic Engine Oil
    Best all-weather viscosity grade for gasoline engines in cars and light trucks that are driven on the street on a daily basis. Reduces turbo lag and provides more power and economy while providing thicker bearing oil films at operating temperature than a petroleum 10W-40. Best all-round, synthetic oil for stock or slightly modified engines in high- performance cars that are street-driven. Best choice to replace a 5W-30 or 10W-30, petroleum-based or other-brand synthetic oil if maximum durability is preferred. Acceptable for engines that are occasionally operated in extreme cold weather.
    Applications: all-all all (all)
    Part #: 1-MT10W30-Q
    Price:   $12.95
    Sale Price: $9.95
    Savings $3.00
    Email a Friend

    click to enlarge
    		 Red Line 10W40 Synthetic Engine Oil
    Best choice for engines that typically run high oil temperature or for engines in daily-driven vehicles regularly operated in hot weather. Great for medium and heavy duty gasoline engines in trucks. Best choice for high-performance engines that see street/strip or track activity. Features a thicker oil film at operating temperature than a petro-based 20W-50.
    Applications: all-all All (all)
    Part #: 1-MT10W40-Q
    Price:   $12.95
    Sale Price: $9.95
    Savings $3.00
    Email a Friend

    click to enlarge
    		 Red Line 20W50 Synthetic Engine Oil
    The ultimate high-temperature protection in Red Line engine oils recommended for street use. Good for engines that regularly run very high oil temperatures. Best for engines that run large clearances such as air-cooled engines or large-displacement, all-out racing engines that see occasional street use. Provides 25% more viscosity in bearings than petroleum 20W-50s. Not recommended for use in cold climates where temperatures are at or below 10°F or -12°C. Not recommended for street use in production engines that see sustained oil temperatures below 225°F (those engines should use Red Line 10W-30 or 10W-40).
    Applications: all-all all (all)
    Part #: 1-MT20W50-Q
    Price:   $12.95
    Sale Price: $9.95
    Savings $3.00
    Email a Friend

    click to enlarge
    		 Red Line 5W20 Syntheic Engine Oil
    The lightest multigrade street engine oil that we sell. Replacement for OE factory-fill oils in many new Ford and Honda passenger cars and light trucks. Excellent performance in weather where cold starting and short running duration are concerns.
    Applications: all-all all (all)
    Part #: 1-MT5W20-Q
    Price:   $12.95
    Sale Price: $9.95
    Savings $3.00
    Email a Friend

    click to enlarge
    		 Red Line 5W30 Synthetic Engine Oil
    Provides the quickest starts and fastest oil pressure rise. Will reduce turbo lag and provides more power and best economy in an engine in good condition. Replacement for OE factory-fill oils in passenger cars and most light trucks, including most new GM cars and trucks. Thicker oil film at operating temperature than a petroleum 10W-40. Best choice for engines operated in extreme cold weather.
    Applications: all-all all (all)
    Part #: 1-MT5W30-Q
    Price:   $12.95
    Sale Price: $9.95
    Savings $3.00
    Email a Friend

    click to enlarge
    		 Red Line 5W40 Synthetic Engine Oil
    Our 5W40 engine oil provides for quicker lubrication and easier start-up. Reduces turbo lag and provides more power and economy in a properly functioning engine, while providing 25% thicker oil films than a petroleum 5W40 or 10W40. Recommended for many late-model European vehicles and as a factory fill replacement in many newer VW, Porsche, and Mercedes Benz applications.
    Applications: all-all all (all)
    Part #: 1-MT5W40-Q
    Price:   $12.95
    Sale Price: $9.95
    Savings $3.00
    Email a Friend
    Red Line Synthetic Gear Lubricants

    click to enlarge
    		 Red Line 75/140 Differential Gear Oil
    Red Line 75W140 gear oil is a GL-5 rated product recommended for street-driven road car differentials where that viscosity is specified, providing excellent performance in both conventional and limited slip units. Popular in late-model Ford truck rear differentials as well as many other common models.
    Applications: all-all all (all)
    Part #: 75/140
    Price:   $12.95
    Sale Price: $9.95
    Savings $3.00
    Email a Friend

    click to enlarge
    		 Red Line 75/140 No Slip Gear Oil
    A heavier product what works well over a wide range of loads and temperatures, This GL-5-type gear oil doesn't contain the friction modifiers for limited-slip hypoid differentials. This makes the transmission synchronizers come to equal speeds more quickly, allowing faster shifting and much easier low-temperature shifting. Can also be used in racing limited-slip differentials where weak spring design causes too much wheel spin.
    Applications: all-all all (all)
    Part #: 75/140NS
    Price:   $12.95
    Sale Price: $9.95
    Savings $3.00
    Email a Friend

    click to enlarge
    		 Red Line 75/90 Differential Gear Oil
    Recommended for all BMWs - either street driven or used on the racetrack. Excellent performance in conventional and limited-slip units. Also for limited-slip manual transaxles which require a 90 WT oil. Contains limited-slip friction modifiers. NOTE: this oil is not suitable for the E46 M3 - use Red Line 75/140.
    Applications: all-all all (all)
    Part #: 75/90
    Price:   $12.95
    Sale Price: $9.95
    Savings $3.00
    Email a Friend
    People who like this product also like these products:
  • Red Line 75/90 No Slip Differential Gear Oil
  • Peake Research R5 FCX-III Fault Code Reader (most BMWs up to 2006)
  • BMW 5 Series (E39) Service Manual / Repair Manual - 1997-2003
    		•

    click to enlarge
    		 Red Line 75/90 No Slip Differential Gear Oil
    This GL-5-type geal oil doesn't contain the friction modifiers for limited-slip hypoid differentials. This makes the transmission synchronizers come to equal speeds more quickly, allowing faster shifting and much easier low-temperature shifting. Suggested for racing limited-slip differentials where weak spring design causes too much wheel spin. NOTE: this oil is not suitable for the E46 M3 - use Red Line 75/140.
    Applications: all-all all (all)
    Part #: 75/90NS
    Price:   $12.95
    Sale Price: $9.95
    Savings $3.00
    Email a Friend

    click to enlarge
    		 Red Line Heavy ShockProof™ Gear Oil
    A unique lubricant containing a suspension of solid microscopic particles as an extreme pressure agent--unique solid dispersion which cushions gear teeth to help prevent tooth breakage and allows the use of lower viscosities. Recommended for heavily-loaded racing differentials and transmissions, Off Road racing and problem gearboxes. The viscosity characteristics allow the lubricant to resist throwoff and provide a film thickness similar to a 75W250 grade, while providing the same low fluid friction as an SAE 75W90.
    Applications: all-all all (all)
    Part #: SHOCKPROOF PINK
    Price:   $12.95
    Sale Price: $9.95
    Savings $3.00
    Email a Friend

    click to enlarge
    		 Red Line Lightweight ShockProof™ Gear Oil
    A unique gear oil designed to lubricate racing transmissions and transaxles which see serious loads (not recommended for most syncro-type transmissions). It has excellent low-temperature flow which allows easier shifting when cold. May be used to obtain maximum power transfer in racing differentials which do not see high temperatures. Similar to a 75W140 gear oil, but with the lower internal friction of an SAE 30 motor oil. Used in two-stroke and four-stroke motocross transmissions (often mixed in equal parts with SuperLight ShockProof™ Gear Oil). Used in most road-racing differentials with moderate power and dogring racing transaxles.
    Applications: all-all all (all)
    Part #: SHOCKPROOF BLUE
    Price:   $12.95
    Sale Price: $9.95
    Savings $3.00
    Email a Friend

    click to enlarge
    		 Red Line MT90 Manual Transmission Fluid/Oil
    Popular in Nissan, Toyota and Mazda manual transmissions and transaxles as well as other selected applications, this is a 75W90 GL-4 Gear Oil that’s slightly heavier than MTL. Provides excellent protection of gears and synchronizers and its balanced slipperiness provides a perfect coefficient of friction, allowing easier shifting.
    Applications: all-all all (all)
    Part #: MT90
    Price:   $12.95
    Sale Price: $9.95
    Savings $3.00
    Email a Friend

    click to enlarge
    		 Red Line MTL (Manual Transmission Fluid/Oil)
    75W/80W GL-4 gear oil (SAE 5W30/10W30 engine oil viscosity) designed for use in BMW manual transmissions. Provides excellent protection of gears and synchronizers and its balanced slipperiness provides a perfect coefficient of friction, allowing easier shifting. Add MTL to older BMWs that have become tough to shift will restore shift smoothness. Also a must-have for cold-climate areas. Sold by the quart. For manual transmissions made after 1/95, we recommend D4-ATF by redline.
    Applications: all-all all (all)
    Part #: MTL
    Price:   $12.95
    Sale Price: $9.95
    Savings $3.00
    Email a Friend

    click to enlarge
    		 Red Line Synthetic ATF
    This product is an approved GM Dexron II, Ford Mercon, and Mercedes Benz Automatic Transmission Fluid and is suitable for GM, late model Ford, or any vehicle which recommends Dexron IID or Dexron IIE or Mercon for refill. Superior stability allows high-temperature operation without varnishing valves and clutches. Also provides improved shifting in cold weather.
    Applications: all-all all (all)
    Part #: SATF
    Price:   $12.95
    Sale Price: $9.95
    Savings $3.00
    Email a Friend

    click to enlarge
    		 Red Line Synthetic D4 ATF
    Synthetic D4 ATF is suitable for use where Dexron III, Dexron II, or Mercon fluids are recommended. BMW recommends ATF oil in all manual transmission in cars produced 1/1995 and later. The D4 ATF provides significantly improved gear protection. The balanced frictional characteristics provides smooth and consistent shifts for extended drain intervals. The superior stability compared to petroleum ATFs allows high-temperature operation without varnishing valves and clutches which leads to transmission failure.
    Applications: all-all all (all)
    Part #: ATFD4
    Price:   $12.95
    Sale Price: $9.95
    Savings $3.00
    Email a Friend
    Red Line Fuel Additives

    click to enlarge
    		 Redline SI-1 Complete Fuel System Cleaner (15oz)
    SI-1's injector and valve detergent is a concentrated package of the most powerful high-temperature detergents available to clean gasoline fuel injectors, intake valves and combustion chambers. SI-1 Complete Fuel System Cleaner can clean injectors to nearly 100% efficiency in one treatment. The cleansing effect on injector deposits can raise fuel economy approximately 12% or even greater, depending on the condition of the injectors. Although many gasolines advertise injector cleanliness, GM presented a paper to the SAE which indicates that their customers encountered injector plugging with all major brands of gasoline (SAE 861533). SI-1 also contains detergents and a synthetic upper cylinder lubricant which will help clean the intake valves, pollution control valves, combustion chamber deposits and carburetors. One bottle of SI-1 to a tank of fuel can reduce octane requirements by two numbers. SI-1 also protects the fuel system from rust. One bottle treats up to 100 gallons. Safe for continual use. 15 oz. bottle.

    Click here for SI-1 Tech Info
    Applications: all-all all (all)
    Part #: SI-1
    Price:   $6.95

    Email a Friend
    Red Line Synthetic Racing Engine Oil

    click to enlarge
    		 Red Line 20 WT SAE (5W20) Race Engine Oil
    For drag racing, circle track qualifying, and racing engines designed for low-viscosity oils. Many drag racers run this oil for 10 to 12 passes before changing, with no sign of shear or loss of viscosity. Popular with bracket racers looking for extra performance.
    Applications: all-all all (all)
    Part #: 1-MT20WT-Q
    Price:   $12.95
    Sale Price: $9.95
    Savings $3.00
    Email a Friend

    click to enlarge
    		 Red Line 30 WT SAE (10W30) Race Engine Oil
    Suitable in well-balanced racing engines for sustained high-speed use where low internal friction is desired. Popular in bracket engines, 355 Sprint Car engines, and World of Outlaw 410 engines.
    Applications: all-all all (all)
    Part #: 1-MT30WT-Q
    Price:   $12.95
    Sale Price: $9.95
    Savings $3.00
    Email a Friend

    click to enlarge
    		 Red Line 40 WT SAE (15W40) Race Engine Oil
    For use where temperatures may be high and when a wide range in RPMs and speeds will be encountered.
    Applications: all-all all (all)
    Part #: 1-MT40WT-Q
    Price:   $12.95
    Sale Price: $9.95
    Savings $3.00
    Email a Friend

    click to enlarge
    		 Red Line 50 WT SAE (15W50) Race Engine Oil
    For use where extremely high temperatures may be encountered and when engine durability is the primary concern.
    Applications: all-all all (all)
    Part #: 1-MT50WT-Q
    Price:   $12.95
    Sale Price: $9.95
    Savings $3.00
    Email a Friend
    Red Line Coolants and Other

    click to enlarge
    		 Red Line Water Wetter Heat Transfer Agent
    Water Wetter is a unique wetting agent for cooling systems which reduces coolant temperatures by as much as 30°F. This liquid product can be used to provide rust and corrosion protection in plain water for racing engines, which provides much better heat transfer properties than glycol-based antifreeze. Or it can be added to new or used antifreeze to improve the heat transfer of ethylene and propylene glycol systems. Designed for modern aluminum, cast iron, copper, brass, and bronze systems.
    Applications: all-all all (all)
    Part #: 1-WW-12Z
    Price:   $8.95
    Sale Price: $6.95
    Savings $2.00
    Email a Friend

    click to enlarge
    		 RedLine Synthetic Power Steering Fluid - 1 quart
    This fully synthetic power steering fluid, provides much improved wear protection, resists thermal breakdown, evaporation and foaming at high temperatures. Also, provides continued high pump output. Suitable for most power steering units.
    Applications: all-all all (all)
    Part #: SPSF
    Price:   $12.95
    Sale Price: $8.95
    Savings $4.00
    Email a Friend
    Bilstein Shocks

    click to enlarge
    		 E90/E92/E93 M3 Bilstein Heavy Duty Shocks (Set of 4) for 2008+ w/o EDC
    Improve your 2008 M3's suspension handling and shock longevity by upgrading to Bilstein's renowned Heavy Duty line of shocks, made for M3 with stock coil springs (not lowered). Set includes 4 HD shocks (2 front, 2 rear). Not for cars with EDC (electronic dampening control).

    These Bilstein HD Shocks fit the following BMWs:
    2008+ E90 M3 sedan **without EDC
    2008+ E92 M3 coupe **without EDC
    2008+ E93 M3 convertible **without EDC
    Applications: 2008-- M3 (E90 E92 E93)
    Part #: E9xM3BILSTEINHD
    Price:   $769.60
    Sale Price: $729.95
    Savings $39.65
    Email a Friend

    click to enlarge
    		 E90/E92/E93 M3 Bilstein Sport Shocks (Set of 4) for 2008+ w/o EDC
    Dynamically improve handling on your 2008+ M3 by upgrading to a set of Bilstein's acclaimed Sport shocks. Specially designed for compatibility with sport/lowering springs, this set includes 4 shocks, 2 front and 2 rear. Not for cars with EDC (eletronic dampening control).

    These Bilstein Sport Shocks fit the following BMWs:
    2008+ E90 M3 sedan **without EDC
    2008+ E92 M3 coupe **without EDC
    2008+ E93 M3 convertible **without EDC
    Applications: 2008-- M3 (E90 E92 E93)
    Part #: E9xM3BILSTEINSPORT
    Price:   $769.60
    Sale Price: $729.95
    Savings $39.65
    Email a Friend
    H&R Springs

    click to enlarge
    		 E90/E92 M3 (2008+) H&R Sport PLUS Spring Set (Stiffer Version)
    The same ride height as the standard H&R Sport springs (-1.0" front, -0.6" rear over the stock) but with a stiffer spring rate geared even more towards track performance. Fits all 2008+ E90 M3 sedan and E92 M3 coupe, with AND without electronic dampening control (EDC).

    Turner Motorsport E90 M3 with H&R Sport Springs After thousands of street and track miles in our own 2008 M3 sedan project car (the white car pictured), we loved the way the "standard" H&R Sport Springs felt on both the street and track. Since the ride was so compliant on the street (even with 20" wheels), we felt some M3 owners might want to sacrifice some of the street ride quality for an even firmer spring rate that would handle even BETTER on the track. We asked, and H&R delivered -- and the H&R Sport PLUS springs for the E9x M3 were the answer. The same "ideal" ride height with a more aggressive spring rate that is still tolerable on the street (though not as forgiving as the standard H&R Sport springs) and more at home on the track.

    Applications: 2008-- M3 (E90 E92)
    Part #: 50493-88
    Price:   $489.00
    Sale Price: $308.07
    Savings $180.93
    Email a Friend
    People who like this product also like these products:
  • E90/E92 M3 (2008+) H&R Sport Spring Set
    		•

    click to enlarge
    		 E90/E92 M3 (2008+) H&R Sport Spring Set
    This H&R Sport spring kit Lowers ride height by 1.0" front, 0.6" rear over the stock suspension. Direct from Germany, H&R Springs are the highest quality sport springs available. This spring set will help firm up what many consider to be a fairly "soft" stock suspension (at least for a BMW "M" car). They will also make a subtle and noticeable visual improvement to the E90/E92 M3's stance, reducing the perceived fender gap of the stock ride height. This spring kit fits all 2008 and newer E90 sedan and E92 M3 coupe, with AND without electronic dampening control (EDC).

    Turner Motorsport E90 M3 with H&R Sport Springs We've installed these on our own 2008 M3 sedan project car (the white car pictured) and love the way these spring feel. They transform the handling into more of what (we feel) an M car should feel like -- sharp cornering with only a small sacrifice in ride quality. The ride is still very compliant and well suited for city streets, keeping the ride quality very close to the stock ride comfort... even with 20" wheels! Now that's a well engineered set of springs!
    Applications: 2008-- M3 (E90 E92)
    Part #: 29053-1
    Price:   $489.00
    Sale Price: $317.85
    Savings $171.15
    Email a Friend
    People who like this product also like these products:
  • E90/E92 M3 (2008+) H&R Sport PLUS Spring Set (Stiffer Version)
    		•
    Bilstein PSS, PSS9 & PSS10 Coil-Over Suspensions

    click to enlarge
    		 Winzer Tekwax Rust Proofing Spray
    Running a threaded collar coil-over suspension on the street? Winzer Tekwax Rustproofing Spray Wax is a must! Simply spray on the threaded collar of the coil-over and you have protection from the elements! Reduce corrosion, oxidation and rust. Also great for general rustproofing on all metal surfaces. 3-foot extention tube included for those tight to reach spots.
    Applications: --- All (All)
    Part #: 891.9016
    Price:   $16.31

    Email a Friend

    click to enlarge
    		 E9x M3 Bilstein PSS10 Coil Over Kit
    Bilstein's renowned 10-way adjustable coil over suspension is now available for the 2008, 2009 and newer M3! Including E90 M3 sedan, E92 M3 coupe and E93 M3 convertible. Adjustable ride height from -10mm to -35mm (front) and -20mm to -35 (rear) with 10 way adjustable Bilstein shocks/struts.

    The PSS10 offers TEN shock dampening adjustment settings, which can be used to both switch from street and track, or fine tune dampening for your desired handling characteristics. To insure maximum performance, these systems utilize Bilstein's superior monotube gas shocks, featuring:
    • Largest available piston diameter for greater sensitivity and precise control.
    • Patented digressive piston head design and deflective valving instantly reacts to changing road conditions.
    • 10-way adjustable dampening knobs that "click" from soft to hard with no tools or jacking required.
    • Monotube design dissipates heat more effectively than a twin tube shock for cooler, more efficient operation and longer life.
    • Weather resistant coating to resist oxidization, and ensure long life.
    • Lighter weight reduces wear and tear on suspension components.
    • Wrenches to adjust front and rear ride height included!
    10-way hand-adjustable shocksThe Bilstein PSS10 Suspension provides the ultimate in performance tuning. The fully-adjustable monotube gas shock absorbers offer a selection of TEN precise compression and rebound settings, from comfort to competition. Each setting "clicks" into place, and a labeled indicator lets you know exactly what setting you are on, without any counting of clicks. The front and rear progressive rate springs allow accurate adjustment of the vehicle ride height and center of gravity for the level of performance you seek.

    This Bilstein PSS10 Coil over kit fits the following BMWs:
    2008+ E90 M3 sedan
    2008+ E92 M3 coupe
    2008+ E93 M3 convertible
    Applications: 2008-- M3 (E90 E92 E93)
    Part #: GM5-E570-H1
    Price:   $2,495.00
    Sale Price: $2,295.00
    Savings $200.00
    Email a Friend
    H&R Coil Over Suspensions

    click to enlarge
    		 E90/E92 M3 H&R Coilover Kit - 2008+ M3 Sedan & Coupe
    If the inherent body roll, and soft turn in of your 2008+ M3 is leaving you wanting more, H&R has your answer. This adjustable street coilover suspension kit allows ride height adjustment, front and rear, and gives you perfectly matched springs and shocks, for ideal dampening and handling.
    *** This coilover kit is NOT designed for cars with EDC (electronic dampening control), and as such will disable EDC if it is installed on an EDC-equipped M3. ***

    SPECIAL PRICING FOR A VERY LIMITED TIME!
    FREE UPS GROUND SHIPPING!

    This coilover suspension kit fits the following BMWs:
    2008+ E90 M3 sedan w/o EDC
    2008+ E92 M3 coupe w/o EDC
    Applications: 2008-- M3 (E90 E92)
    Part #: 50492
    Price:   $1,699.00
    Sale Price: $1,099.00
    Savings $600.00
    Email a Friend
    MOTON Coilovers & Race Dampers

    click to enlarge
    		 Moton Adjustable Motorsport Damper Package

    Moton suspensions are used on the world’s most-advanced sports and touring cars and are available to club racers and professional motorsport teams alike. Moton shock absorbers are available in two styles: Club Sport for weekend track/DE cars and Motorsport for all-out racers. Moton’s innovative designs and cutting-edge engineering are exactly what racers look for when choosing a racing-style suspension.

    TMS includes in each set of Moton dampers everything you need to install, setup, and win with a Moton suspension: 2 front struts, 2 rear shocks, spring seats and hardware, double-shear rear shock mounts, front camber plates, and a set of H&R 60mm race springs. We set the springs up around YOUR preferences and our goal is to give you the best handling car the first time you get behind the wheel.

    The Moton Motorsport shocks are available in three configurations:
  • Double-Adjustable: rebound + compression
  • Triple-Adjustable: rebound + low speed compression + high-speed compression
  • Quadruple-Adjustable: low speed compression + high speed compression + low speed rebound + high speed rebound

    • Adjustments can be made to any combination via knobs on the piston rod and/or reservoir. Each strut/shock body is constructed of steel or aluminum and the piston shafts are induction hardened and chrome-plated. Moton Motorsport dampers feature all of the technology and engineering needed to win in major sprint and endurance races around the world.




      TMS/Moton Suspension Packages include:
    • 1 set of Moton Motorsport dampers (front and rear)
    • front camber plates (depending on model)
    • double-shear rear shock mounts
    • H&R 60mm spring set (front and rear) with your choice of spring rates
    • 60mm spring seats and hardware
    • H&R rear ride height adjusters (coil over rear shocks and spring seats included)

     PRICING:
    BMW Application / Fitment 2-way Adjust. 3-way Adjust. 4-way Adjust.
    E30 all – 318/325/M3 86-91 $7088.00 $8884.00 $13,382.00
    E36 all – 325/328/M3 92-99 $6953.00 $8729.00 $13,232.00
    E46 all – 325/328/330/M3 99-06 $7309.00 $9137.00 $13,628.00
    E90 all – 325/328/330/335/M3 06-up $7309.00 $9137.00 $13,628.00
    E92 all – 325/328/330/335/M3 07-up $6953.00 $8729.00 $13,232.00
    Z3 all – Z3 2.3/2.8/3.0/MZ3 $6683.00 $8420.00 $12,932.00
    Z4 all – Z4 2.5/3.0/Z4 M $6683.00 $8420.00 $12,932.00

    Applications: 1984-- 323/325/328/330/M3 (E30 E36 E46 E90 E92 Z3 Z4)
    Part #: Moton Motorsport
    Price:   $0.00
    Options: Choose your car:
    Options: Select a damper system

    Email a Friend


    click to enlarge
    		 E9x M3 MOTON Street Sport Suspension Kit (2008+ E90/E92 M3)
    Designed for high performance street driving, as well as the serious club racer. The Moton street sport suspension is based on the performance of the coveted Moton Club Sport suspension, and combines easy "plug&play" installation with superb performance, both on the street and track. This suspension system is unquestionably the best non-remote resevoir system on the market today, and ideal for any dual-duty E90/E92 M3 that sees both street and track driving. Fits M3 with EDC (electronic dampening), but requires deactivation of the system.

    The Moton Street Sport suspension comes with springs to fit the original upper mounts of the E90/E92 M3. It is literally a "bolt-on" suspension set, ready to go out of the box. For the more demanding driver, who wants to have the flexibility to change the spring rates, optional race springs and camber plates can also be added and used. We found the included springs to be ideal for mixed street/track driving on the M3.

    Double Adjustable Dampers - The Moton Street Sport kit comes with separate rebound and compression controls, each with seven adjustment levels to help you dial in for every condition you encounter. The Street Sport suspension is designed to be extremely comfortable while driving on daily roads and can be easily adjusted for track conditions. When adjusting the dampers, each click will make a very noticeable change that the driver will feel.

      Features
    • Separate compression (7) and rebound (7) controls
    • Ride height adjustable
    • Includes springs that fit original upper mounts
    • Blow-off valve systems for compression and rebound controls
    • Light weight dual tube design
    • Large piston rod diameter for faster fluid displacement
      Benefits
    • Easy installation on the car
    • Wide range of dampening (compression & rebound)
    • Comfortable on the road & easy to adjust to race conditions
    • Each adjustment noticeable to driver
    • Easily converted to accept race springs & bearing plates (optional)
    • Simple to adjust
    • Substantially improved handling and performance

    This Moton Street Sport Suspension fits:
    2008+ E90 M3 sedan
    2008+ E92 M3 coupe
    2008+ E93 M3 convertible
    Applications: 2008-- M3 (E90 E92 E93)
    Part #: MB-505-008
    Price:   $4,695.00

    Email a Friend
    Suspension Bushings and Mounts

    click to enlarge
    		 E90/E92 Race Rear Upper Shock Mount
    If you're installing a rear shock on your E90 or E92 that utilizes a Spherical Bearing or Rod-End, common in racing shocks/dampers, this is one of the rear mounts needed to attach your shock to the chassis (this is the UPPER mount). Developed for our Grand Am Cup 328i race car, this upper shock mount works on all 2006+ E90/E92 including 325i, 328i, 330i, 335i, & M3.

    view larger Our Racing Rear Upper Shock Mount is machined out of aircraft grade aluminum. Due to the wide variety of Spherical Bearings and Rod-Ends used on race shock applications, the bushing kit is sold seperately (see chart for currently available bushing sizes).

    Chart
    Optional Bushings Bushing Kit Part#B=Bore dia. W=Ball width Optional Bushings
    TSU9007B1515 mm12 mm
    TSU9007B50.500" inch .500" inch
    Call or Emailother sizeother size

    Don't see your desired size? No problem. Simply give us a call and our in-house machine shop build you custom bushings for your application.

    This E90/E92 Race Rear Upper Shock Mount fits the following BMWs:
    2006+ E90 3 Series Sedan incl 325i, 328i, 330i, 335i
    2007+ E92 3 Series Coupe incl 328i, 335i
    2008+ E90/E92 M3 incl M3 sedan and M3 coupe

    Instructions for E90/E92 Race Rear Upper Shock Mount (TSU9006RU1)
    Applications: 2006-- 325i 328i 330i 335i M3 (E90 E92)
    Part #: TSU9006RU1
    Price:   $299.95