Turner Motorsport BMW Parts click for details Turner Motorsport


 
Bookmark and Share
  Useful links:
 BMW Chassis Codes
BMW Warranty Info

 
Special / Sale Products
Below are some of our featured SALE items, with unbeatable prices.

Brake Packages

click to enlarge
 E36 M3 Front Big Brake Conversion For E36 318i/325i/323i/328i
Convert your wimpy 325i or 328i brakes to M3 rotors and calipers! Our kit includes everything you need to replace your stock non-M3 E36 brakes with factory BMW M3 brake components, including calipers, rotors, spindles (with bearings) & pads.
Applications: 1992-1998 325i/328i (E36)
Part #: 325toM3brakes
Price:   $1,773.23
Sale Price: $959.00
Savings $814.23

 Options: Add stainless steel lines?
Options: Add upgraded (brass) caliper bushings?
Options: Choose brake pads:
Options: Choose brake rotors:
Options: Pre-assemble this package?

Email a Friend
People who like this product also like these products:
  • E36 (incl M3) Stainless Steel Brake Line Set - DOT Approved
  • E36 1994-98, E46 323i/325i/328i, Z4 2.5/3.0 Rear Axxis Ultimate
  • TMS E36 & Z3 Carbon Brake Backing Plates
    		•
    Brake Fluid

    click to enlarge
    		 ATE Super Blue Brake Fluid (1 liter)
    This high performance Brake Fluid is ideal for coping with the extreme demands posed by motor racing, autocross, or high performance driving. The overall high dry and wet boiling points make this fluid an excellent choice for street driven vehicles, too, where brake fluid is flushed less frequently than that in race-driven vehicles.

    The ATE Super Blue fluid exceeds all DOT 4 requirements, with a dry boiling point or 536 degrees F and a wet boiling point 396 degrees F. This fluid is NOT SILICONE and is compatible with conventional brake fluid. It also available in amber color (known as ATE TYP 200, which we also carry) to help when flushing the complete system. Tip: Rotating between amber and blue every other brake flush, allows you to flush until you see a distinct color change -- convserving fluid and, most importantly, assuring a full and proper flushing of the old brake fluid.

    Color: Blue

    Applications: 1967-2009 all (all)
    Part #: ATESB
    Price:   $19.95
    Sale Price: $12.95
    Savings $7.00
    Email a Friend
    People who like this product also like these products:
  • Turner Motorsport Brake Bleeder Bottle
  • Ate Type 200 Racing Brake Fluid (1 liter)
    		•

    click to enlarge
    		 Ate Type 200 Racing Brake Fluid (1 liter)
    This high performance Brake Fluid is ideal for coping with the extreme demands posed by motor racing, autocross, or high performance driving. The overall high dry and wet boiling points make this fluid an excellent choice for street driven vehicles, too, where brake fluid is flushed less frequently than that in race-driven vehicles.

    The ATE Type 200 fluid exceeds all DOT 4 requirements, with a dry boiling point or 536 degrees F and a wet boiling point 396 degrees F. This fluid is NOT SILICONE and is compatible with conventional brake fluid. It also available in blue tinted color (known as ATE Super Blue, which we also carry) to help when flushing the complete system. Tip: Rotating between amber and blue every other brake flush, allows you to flush until you see a distinct color change -- convserving fluid and, most importantly, assuring a full and proper flushing of the old brake fluid.

    Color: Amber (gold)

    Applications: 1967-2009 all (all)
    Part #: ATE200
    Price:   $19.95
    Sale Price: $12.95
    Savings $7.00
    Email a Friend
    People who like this product also like these products:
  • Turner Motorsport Brake Bleeder Bottle
  • ATE Super Blue Brake Fluid (1 liter)
    		•
    Brake Rotors - Motorsport

    click to enlarge
    		 E46 M3 / MZ4 Rear Euro Cross-Drilled Brake Rotor (L&R Pair)
    REAR ROTORS (PAIR); Original BMW 2-piece floating and cross-drilled rotor from the Euro M3; price is for a pair of left and right rotors. These rotors are a DIRECT replacement for your stock US-spec rotors. They bolt right on to your stock hubs with no modification or extra parts needed! A great ‘first step’ upgrade to getting better braking on the street or track. These are factory replacement for MZ4 Roaster / Coupe.
    Applications: 2001-2006 M3, MZ4 (E46, MZ4)
    Part #: 34212282303 (34 21 2 282 303)
    Price:   $460.00
    Sale Price: $338.00
    Savings $122.00
    Email a Friend
    B&M Short Shift Kits

    click to enlarge
    		 B&M Short Shift Kit for 3 and 5 Series
    The fundamentally finest shifter for the pure BMW enthusiast. This Sport Shifter has all of the features a performance minded driver requires. The finest materials, CAD designed, coupled with a short throw results in one extraordinary precision shifting system. Special features engineered into this unit include a two piece fully isolated stick assembly, exclusive integrated and dampened pivot cup with self lubricating pivot ball, counter balanced to reduce effort and exclusive polymer "Iglide" T-500 lower pivot bushings that are impervious to contamination. The harder this bushing is pushed, the better it works! Featuring an exclusive adjustable pivot, which allows this shifter to fit both standard and M Series applications. All of this combined with a simple straightforward installation provides a professional level shifter. Provides a 25% throw reduction in E30s, E36s, E39s and E46s and a 20% throw reduction in M3 and M5 applications. Fits 6/86 to 91 E30 (alum carrier), 92 to 99 E36, 96 to 03 E39 and 98 to 04 E46 5-speed (not 6-speed). Fits 87 to 04 M3 and 99 to 03 M5 applications.

    Click here for comparisons, installation instructions, diagrams and more information.
    Applications: 5/1986-2004 318, 325, 328, M3, 528, 525, 530, M5 (E30 E36 E46 E39)
    Part #: 45126
    Price:   $209.95
    Sale Price: $195.00
    Savings $14.95


    Email a Friend

    click to enlarge
    		 B&M Short Shift Kit for E46 330 6 Speed
    The fundamentally finest shifter for the pure BMW enthusiast. This Sport Shifter has all of the features a performance minded driver requires. The finest materials, CAD designed, coupled with a short throw results in one extraordinary precision shifting system.
    • A precise 30% throw reduction
    • Counter balanced to reduce effort
    • Two piece 416 Stainless Steel & Aluminum Stick assembly
    • Two piece stick provides vibration free operation
    • Dampened pivot cup with self lubricating pivot ball
    • Exclusive polymer Iglide T-500 lower pivot bushings
    Applications: 2004-2005 330 (E46)
    Part #: 45130
    Price:   $195.00
    Sale Price: $159.95
    Savings $35.05
    Email a Friend
    Differential

    click to enlarge
    		 Limited Slip Differential Unit for E90/E92 335i (LSD)
    Have you taken your 335i to the track yet? Have you turned off traction control and tried to launch your 335i? Imagine how fast your car would go 0-60mph if both wheels had power going to them! Its unbelievable that such a great performance car is lacking a limited slip -- perhaps BMW didn't want the 335i to be THAT much faster than the previous M3! BMW stopped putting limited slip differentials in all cars in 1995 (except for "M" cars). So, if it’s not an M3 or M5 your car does not have power going to BOTH wheels at the same time. In other words, it is "one wheel drive." This is not good for any type of performance car and if you have taken your car to the track or have auto crossed it you can see why.

    Video: LSD makes all the diff-erence
    Our limited slip unit for the 335i is a complete assembly (or "chunk") that replaces the "open" differential chunk currently in your diff. This an authentic German made Drexler brand clutch type limited slip (with 45/30 ramping). Drexler worked directly with BMW Motorsport to create this unit, and supplies to such as M-Team Schnitzer. The unit uses the factory bearings, fits into the factory differential housing, reuses the factory ring gear*** and all critical dimensions are close to the factory unit. This makes installation easier, requiring minimal ring and pinion setup time and shimming. Professional installation is recommended, however.

    We sell this part in a few different ways:
    1) As long as you don't have a welded-in ring gear, TMS can install this unit in your car's original differential - You send us your diff and we install the limited slip unit and send the diff back. Some cars are being built with welded ring gear rather than a bolted-together unit.

    2) We can send you a low mileage preowned diff with the limited slip installed - and we charge you a core charge. When you send us back your (non welded ring gear) stock diff we refund the core charge (currently $1600)

    *** Please note that on mid year production (mid-'07) 335i's, we have found that the ring and pinion is welded in place, and cannot be unbolted to re-use with our limited slip "chunk". On these 335i's you must buy our LSD unit already installed into a differential (option #2), as your existing diff is not elligible for option #1 .

    Applications: 2007-2009 335i (E90 E92)
    Part #: 100-100-00008
    Price:   $3,995.00
    Sale Price: $2,995.00
    Savings $1,000.00

     Options: Just the Limited Slip unit ?

    Email a Friend
    People who like this product also like these products:
  • OS Giken Limited Slip Differential Unit for E82 135i & E90/E92 335i (LSD)
    		•
    Radiators

    click to enlarge
    		 FLUIDYNE Radiator for E36 M3 & E36 325i/is, 328i/s, 323is
    Increased reliability and cooling! Replace your problematic stock E36 radiator with the FLUIDYNE "Direct-Fit" all-aluminum radiator. The stock radiator has an aluminum core and plastic end-tanks that become brittle and can leek or crack, which can leave you abandoned on the side of the road or track. FLUIDYNE radiators feature CAB-brazed (no epoxy) core construction, polished aluminum tanks and durable high efficiency air fins for maximum cooling capability across the full range of street and track driving conditions.

    FLUIDYNE does not use epoxy to seal any part of the radiator. The cores are assembled using a million dollar Nocolok brazing furnace, and all tanks and brackets are TIG welded by hand. Best of all, this is a direct one for one swap replacement for all 1992, 1993, 1994, 1995, 1996, 1997, 1998 and 1999 E36 3 Series 6 cylinder, including E36 M3! If you plan on owning your BMW for many years to come, or are using it in a situation where failure is NOT an option such as track or racing, then this should be considered over the failure-prone stock radiator units.

    Some of the features of E36 FLUIDYNE Radiator:
    Core Size: 21.5W x 17.5H x 1.5D
    Core Style: 1-row with 1.5" Tubes
    Overall Size: 26.37W x 17.6H x 2.0D

    This radiator fits the following BMWs:
    1995-1999 E36 M3 including coupe, sedan & convertible
    1992-1995 E36 325i & 325is sedan/coupe/convt
    1996-1998 E36 328i, 328is & 323is coupe/sedan/convt
    1999-1999 E36 328is & 323is
    Applications: 1992-1999 M3 325i 325is 328i 328is 323is (E36)
    Part #: FHP11-92E36
    Price:   $699.00
    Sale Price: $624.00
    Savings $75.00
    Email a Friend
    Fuel System

    click to enlarge
    		 Bosch 24-lb Fuel Injector Set
    Most E36 M3 engines today need more fuel to balance the air-fuel ratio after adding modifications such as cold air intakes, cams, headers, etc. During our own testing we found the stock BMW injectors reach their limits with only a few modifications (intake, HFM, and basic chip). Anything more than these basic upgrades and you will need larger injectors. In the packages and kits we have developed we found these Bosch 24lb injectors to be ideal – not too large and not too small. With the correct software you can run your engine without fear of the mixture being too lean. We use these injectors in our 3.2 OBD-II kits as well as in our 3.0/3.2 OBD-I systems. These injectors, and the software we developed for them, are designed for the E36 M3 only. We have not seen a reason to use them on a E36 325/328.

    Note: You should never use a fuel injector that is not properly calibrated to your engine with the proper software. Doing so can seriously damage the engine, ECU, or injectors.
    Applications: 1992-1999 M50, M52 (E36 MZ3)
    Part #: 24LBINJ-SET
    Price:   $336.00
    Sale Price: $239.00
    Savings $97.00
    Email a Friend
    People who like this product also like these products:
  • E36 M3 OBD-II TMS/Conforti Performance Package Stage II
  • Eurosport Cold-Air Intake Kit for E36 M3 with 3.5 inch HFM (Euro, 540i or Porsche)
  • 1995 M3 Schrick Camshaft/Injectors/Chip Upgrade Kit
    		•
    Shark Injector OBDII Software: 1996-2005 Cars

    click to enlarge
    		 E39 528i Conforti Shark Injector Engine Software - 1997-2000 528i
    Performance Software System for E39 528i 1997-2000
    This amazing hand-held unit downloads the TMS/Conforti performance engine software directly into your BMW. The Shark Injector™ provides an easy to install OBD-II performance upgrade, in minutes! TMS / Conforti Performance Engine Software represents the most cost-effective approach to increasing engine performance. It has been dyno-tested to provide a safe increase in power by altering fuel enrichment, cam timing and ignition timing specifically for use with premium gasoline. TMS OBD-II Performance Engine Software also provides an increase in the factory rev-limit allowing for optimum shift points for maximum acceleration. Not only do we re-map part-throttle fuel and spark, we also re-map other areas of chips other tuners don't touch - such as acceleration enrichment, transition fueling (how the car responds to rapid change in pedal, and VANOS control as needed to optimize the vehicle for operation on premium fuel (91+ octane).

    This programmer works for all 1997, 1998, 1999, and 2000 528i sedans and wagons.

    Click here for installation instructions.

    Click here for our FAQ file for the Shark Injector

    Please note, performing this software update requires the use of a 10 amp (or greater) battery charger. If you do not have an adequate charger, we carry one, for your convenience which can be added below.
    Applications: 1997-2000 528i (E39)
    Part #: E39-528i-PERFORMANCE-SOFTWARE
    Price:   $299.95
    Options: Choose your car:
    Options: Add a 2/10/55 amp battery charger?
    Options: Add USB cable for updates?

    Email a Friend
    People who like this product also like these products:
  • USB Cable for USB Shark Injector
  • aFe Intake Kit - E39 528i & 525i
  • E39 6cyl Power Pulley Kit
    		•

    click to enlarge
    		 Performance Software System for E39 M5
    Performance Software System for E39 M5 2000-2003

    Gains of 23 hp @ 6100 rpm and 19 lb/ft torque @ 5000 rpm -- as measured to the rear wheels in 3rd gear!!
    This amazing hand-held unit downloads the TMS/Conforti performance engine software directly into your BMW. The Shark Injector™ provides an easy to install OBD-II performance upgrade, in minutes! TMS / Conforti Performance Engine Software represents the most cost-effective approach to increasing engine performance. It has been dyno-tested to provide a safe increase in power by altering fuel enrichment, cam timing and ignition timing specifically for use with premium gasoline. TMS OBD-II Performance Engine Software also provides an increase in the factory rev-limit allowing for optimum shift points for maximum acceleration. Not only do we re-map part-throttle fuel and spark, we also re-map other areas of chips other tuners don't touch - such as acceleration enrichment, transition fueling (how the car responds to rapid change in pedal), and VANOS control as needed to optimize the vehicle for operation on premium fuel (91+ octane).

    Now you can get the best power, in ALL gears! As BMW tuned the M5 quite "modestly" in the lower gears, this software makes some impressive gains in 1st, 2nd and 3rd gears. Of course it also makes a measureable amount of torque and horsepower in the upper gears as well! See the dyno chart for more info.

    This programmer works for all 2000, 2001, 2002 and 2003 M5 (E39).

    Customizable performance software to suit your M5's needs!
    • Unlock GOBS of torque and horsepower in gears 1, 2, and 3 as well as great gains in gears 4, 5, and 6.
    • Choose between 91 and 93 octane
    • Throttle response improved in both Sport and non-Sport modes
    • Rev limit increased to 7400 (7000 stock)
    • Top Speed Limiter Removed
    • Choice of several options to make driving your M5 more enjoyable:

      Standard Performance Software. The car's Sport and DSC functions remain the same as stock but all of the other Shark Injector benefits (more horsepower and torque, smoother engine, quicker throttle response) are added.

      Sport Mode Memory - Even when you turn the ignition off you can keep the Sport mode activated. This is extremely useful if spend all of your time in Sport mode. Now you won't have to repeatedly push the button every time you turn the car on!

      DSC button controls Sport mode - With this feature you can control how the DSC and Sport mode interact. By pressing the DSC button and turning the system off you will automatically engage Sport mode. And by turning DSC back on, the Sport mode will disengage. This effectively de-activates the Sport button on the console. You'll only have to push one button instead of two!

    4th Gear Dyno Chart3rd Gear Dyno Chart Please note, even though the E39 M5 Shark InjectorTM is a “new” product, the actual software uploaded to your M5 is not new. This software has been developed over the last few years, and has already been applied and running in many M5’s using a different non-DIY flashing method. The ability to use the Shark InjectorTM to upload the software to your M5’s engine control unit, however, is brand new.

    We've done several dyno runs on more than one M5 to establish what the average / typical gains are, before advertising hp/torque figures. On the right, you can view dyno charts showing the typical gains from this software upgrade -- one from a 3rd gear dyno run, and the other from a 4th gear dyno run.

    Click here for our FAQ file for the Shark Injector

    Click here for installation instructions

     Please note, performing this software update requires the use of a 10 amp (or greater) battery charger. If you do not have an adequate charger, we carry one, for your convenience which can be added below.
    Applications: 2000-2003 M5 (E39)
    Part #: E39-M5-PERFORMANCE-SOFTWARE
    Price:   $299.95
    Options: Choose minimum octane
    Options: Choose your option
    Options: Add a 2/10/55 amp battery charger?
    Options: Add USB cable for updates?

    Email a Friend
    People who like this product also like these products:
  • Battery Charger - 12-Volt 2/10/55 Amp with Engine Start
  • USB Cable for USB Shark Injector
  • aFe Intake Kit - E39 M5 Stage II
    		•

    click to enlarge
    		 E39 525i 01-03 Conforti Shark Injector Engine Software
    Performance Software System for all E39 525i 2001 - 2003.
    This amazing hand-held unit downloads the TMS/Conforti performance engine software directly into your BMW. The Shark Injector™ provides an easy to install OBD-II performance upgrade, in minutes! TMS / Conforti Performance Engine Software represents the most cost-effective approach to increasing engine performance. It has been dyno-tested to provide a safe increase in power by altering fuel enrichment, cam timing and ignition timing specifically for use with premium gasoline. TMS OBD-II Performance Engine Software also provides an increase in the factory rev-limit allowing for optimum shift points for maximum acceleration. Not only do we re-map part-throttle fuel and spark, we also re-map other areas of chips other tuners don't touch - such as acceleration enrichment, transition fueling (how the car responds to rapid change in pedal, and VANOS control as needed to optimize the vehicle for operation on premium fuel (91+ octane).

    This programmer works for 2001, 2002, and all 2003 525i sedan and wagon models.

    2.5 Dyno Data

    Click here for installation instructions.

    Click here for our FAQ file for the Shark Injector

    Please note, performing this software update requires the use of a 10 amp (or greater) battery charger. If you do not have an adequate charger, we carry one, for your convenience which can be added below.
    Applications: 2001-2003 525i (E39)
    Part #: E39-525i-PERFORMANCE-SOFTWARE
    Price:   $299.95
    Options: Add a 2/10/55 amp battery charger?
    Options: Add USB cable for updates?

    Email a Friend
    People who like this product also like these products:
  • Battery Charger - 12-Volt 2/10/55 Amp with Engine Start
  • aFe Intake Kit - E39 528i & 525i
  • E39 6cyl Power Pulley Kit
    		•

    click to enlarge
    		 E39 530i 01-03 Conforti Shark Injector Engine Software
    Performance Software System for all E39 530i 2001 - 2003.
    This amazing hand-held unit downloads the TMS/Conforti performance engine software directly into your BMW. The Shark Injector™ provides an easy to install OBD-II performance upgrade, in minutes! TMS / Conforti Performance Engine Software represents the most cost-effective approach to increasing engine performance. It has been dyno-tested to provide a safe increase in power by altering fuel enrichment, cam timing and ignition timing specifically for use with premium gasoline. TMS OBD-II Performance Engine Software also provides an increase in the factory rev-limit allowing for optimum shift points for maximum acceleration. Not only do we re-map part-throttle fuel and spark, we also re-map other areas of chips other tuners don't touch - such as acceleration enrichment, transition fueling (how the car responds to rapid change in pedal, and VANOS control as needed to optimize the vehicle for operation on premium fuel (91+ octane).

    This programmer works for 2001, 2002, and all 2003 530i sedan and wagon models.

    3.0 Dyno Data

    Click here for installation instructions.

    Click here for our FAQ file for the Shark Injector



    Please note, performing this software update requires the use of a 10 amp (or greater) battery charger. If you do not have an adequate charger, we carry one, for your convenience which can be added below.
    Applications: 2001-2003 530i (E39)
    Part #: E39-530i-PERFORMANCE-SOFTWARE
    Price:   $299.95
    Options: Add a 2/10/55 amp battery charger?
    Options: Add USB cable for updates?

    Email a Friend
    People who like this product also like these products:
  • Battery Charger - 12-Volt 2/10/55 Amp with Engine Start
  • aFe Intake Kit - E39 530i
  • E39 6cyl Power Pulley Kit
    		•

    click to enlarge
    		 MZ3 (S52) Conforti Shark Injector Engine Software - 1998-2000 M Roadster & Coupe
    Performance Software System for M Roadster, M Coupe, MZ3 1998-2000

    The Shark Injector is an amazing hand-held unit that re-flashes your car with performance software. What really sets this software apart is how easy and effective it is without any further modifications. This software tool re-flashes the stock BMW computer through your car’s diagnostic port and was developed by renowned BMW tuner Jim Conforti, who has nearly 20 years of BMW engine tuning experience. The Shark Injector is one of the safest and most cost-effective enhancements you can do – offering features and results that other upgrades simply cannot touch. The Shark Injector is also upgrade-able through its own USB port, allowing you to upgrade to different software as your needs and modifications change.

    This software is a major refinement of the stock software. It makes the car much easier to drive with less hesitation, more torque, and incredibly smooth operation. A lot of tuning has been done at the low RPM ranges to improve response. The car won’t hesitate or lag, making the car easier to drive. And with the extra torque you can drive in a higher gear and not have to downshift as often. Theoretically this means better fuel mileage too!

    1998-2000 MZ3 Performance Software Peak Power Gains
    HP Gain + 12 @ 6000 RPM
    Torque Gain + 10 @ 4000 RPM
    New Rev Limit 7000 RPM

    dyno chart -
    E36 M3, MZ3 roadster/coupe

    Features:

    • Dyno developed and tuned
    • 1-touch operation
    • LED lights guide you through installation
    • Plug-in to your car's diagnostic port - removal of the computer is not necessary
    • USB connection for downloading updates, new files
    • Works with 91-95 octane fuel
    • Re-install stock software at any time; switch between stock and performance software

    Benefits:

    • Unlock torque and horsepower
    • Smoother engine with less hesitation
    • Improved throttle response
    • Rev limit increased to 7000
    • Top speed limiter removed
    • Installs in minutes!

    Please note, performing this software update requires the use of a 10 amp (or greater) battery charger. If you do not have an adequate charger, we carry one, for your convenience which can be added below. Click here for installation instructions.

    Click here for our FAQ file for the Shark Injector

    This programmer works for 1998, 1999, 2000 M Roadsters and M Coupes (S52 engine).


    Applications: 1998-2000 MZ3 M Roadster & Coupe (MZ3)
    Part #: MZ3-S52-PERFORMANCE-SOFTWARE
    Price:   $299.95
    Options: Add a 2/10/55 amp battery charger?
    Options: Add USB Cable for updates?

    Email a Friend
    People who like this product also like these products:
  • Battery Charger - 12-Volt 2/10/55 Amp with Engine Start
  • USB Cable for USB Shark Injector
    		•

    click to enlarge
    		 MZ3 (S54) Conforti Shark Injector Engine Software - 2001-2002 M Roadster & Coupe
    Performance Software for M Roadster & Coupe 2001-2002 (S54)
    Stock: 253.2 rear wheel Horsepower, 223.1 rear wheel Torque
    Sharked: 266.1 rear wheel Horsepower, 229.8 rear wheel Torque
    Peak Gain 12.9 HP and 6.7 Torque @ the wheels.
    A Max gain of 14.0 lb/ft rear wheel torque @ 4340 rpm
      This software is customizable, too!
    • choose between 91 and 93 octane
    • Top Speed Limiter Removed
    • your choice of a stock rev limit or a raised rev limit to 8100 rpm
    • throttle response improved in both Sport and non-Sport modes
    • choice of several options to make driving your MZ3 more enjoyable (and easier):

      DSC button controls Sport mode. With this feature you can control how the DSC and Sport mode interact. By pressing the DSC button and turning the system off you will automatically engage Sport mode. And by turning DSC back on, the Sport mode will disengage. You'll only have to push one button to engage Sport mode! No messy installation or splicing into wires to get the Sport mode feature! Just press a button and go! Available with 8100 rpm rev limit only.

      Standard Performance Software.       The car's Sport and DSC functions remain the same as stock but all of the other Shark Injector benefits (more horsepower and torque, smoother engine, quicker throttle response) are added. Choose from stock rev limit or a raised 8100 rpm rev limit. Choose your minimum octane requirement (91 or 93).
    Conforti's Comment: "This software seriously changes the character of the MZ3/M Coupe for the better. It was calibrated over a LONG period on my personal vehicle."

    Click here for installation instructions.
    Click here for our FAQ file for the Shark Injector

    M Roadster/Coupe
    dyno chart

    Please note, performing this software update requires the use of a 10 amp (or greater) battery charger. If you do not have an adequate charger, we carry one, for your convenience which can be added below.

    Applications: 2001-2002 MZ3 M Roadster & Coupe (MZ3)
    Part #: MZ3-S54-PERFORMANCE-SOFTWARE
    Price:   $299.95
    Options: Add USB Cable for updates?
    Options: Choose the minimum octane:
    Options: Choose the rev limit:
    Options: Choose your options:

    Email a Friend
    People who like this product also like these products:
  • Battery Charger - 12-Volt 2/10/55 Amp with Engine Start
  • USB Cable for USB Shark Injector
    		•

    click to enlarge
    		 Z3 2.8 Conforti Shark Injector Engine Software - 1998-2000 Z3 2.8
    Performance Software System for Z3 2.8 M52 and M52tu 1997-2000

    The Shark Injector is an amazing hand-held unit that plugs into your car’s diagnostic port and re-flashes the computer with performance software. The software was developed by renowned BMW tuner Jim Conforti, who has nearly 20 years of BMW engine tuning experience. The Shark Injector is one of the safest and most cost-effective enhancements you can do – offering features and results that other upgrades simply cannot touch. The Shark Injector is also upgrade-able through its own USB port, allowing you to upgrade to different software as your needs and modifications change.

    This software is a major refinement of the stock software. It makes the car much easier to drive with less hesitation, more torque, and incredibly smooth operation. A lot of tuning has been done at the low RPM ranges to improve response. The car won’t hesitate or lag, making the car easier to drive. And with the extra torque you can drive in a higher gear and not have to downshift as often. Theoretically this means better fuel mileage too!

    1997-1998 Z3 2.8 (M52 engine) Performance Software Peak Gains
    HP Gain + 15 @ 6400 RPM
    Torque Gain + 9 @ 4500 RPM
    New Rev Limit 7000 RPM


    1999-2000 Z3 2.8 (M52tu engine) Performance Software Peak Gains
    HP Gain + 15 @ 6200 RPM
    Torque Gain + 12 @ 3500 RPM
    New Rev Limit 7000 RPM

    M52tu engine dyno chart -
    E39 528i, E46 328i/ci, Z3 2.8

    Features:

    • Dyno developed and tuned
    • 1-touch operation
    • LED lights guide you through installation
    • Plug-in to your car's diagnostic port - removal of the computer is not necessary
    • USB connection for downloading updates, new files
    • Works with 91-95 octane fuel
    • Re-install stock software at any time; switch between stock and performance software

    Benefits:

    • Unlock torque and horsepower
    • Smoother engine with less hesitation
    • Improved throttle response
    • Rev limit increased to 7000
    • Top speed limiter removed
    • Installs in minutes!

    Please note, performing this software update requires the use of a 10 amp (or greater) battery charger. If you do not have an adequate charger, we carry one, for your convenience which can be added below. Click here for installation instructions.

    Click here for our FAQ file for the Shark Injector

    These programmers work for 1997-1998 Z3 2.8 (M52 engine) and 1999-2000 Z3 2.8 liter (M52tu engine) roadsters and coupes.


    Applications: 1997-2000 Z3 2.8 liter (Z3)
    Part #: Z3-2.8-PERFORMANCE-SOFTWARE
    Price:   $299.95
    Options: Choose your car:
    Options: Add a 2/10/55 amp battery charger?
    Options: Add USB Cable for updates?

    Email a Friend
    People who like this product also like these products:
  • Battery Charger - 12-Volt 2/10/55 Amp with Engine Start
  • Eurosport Cold-Air Intake Kit for Z3 2.8 & M Roadster/Coupe
  • Eurosport Cold-Air Intake Kit for Z3 2.3/2.5/2.8/3.0 Double Vanos Roadster / Coupe
    		•

    click to enlarge
    		 Z3 2.3 Conforti Shark Injector Engine Software - 1999-2000 Z3 2.3
    Performance Software System for Z3 2.3 M52tu 1999-2000

    The Shark Injector is an amazing hand-held unit that re-flashes your car with performance software. What really sets this software apart is how easy and effective it is without any further modifications. This software tool re-flashes the stock BMW computer through your car’s diagnostic port and was developed by renowned BMW tuner Jim Conforti, who has nearly 20 years of BMW engine tuning experience. The Shark Injector is one of the safest and most cost-effective enhancements you can do – offering features and results that other upgrades simply cannot touch. The Shark Injector is also upgrade-able through its own USB port, allowing you to upgrade to different software as your needs and modifications change.

    This software is a major refinement of the stock software. It makes the car much easier to drive with less hesitation, more torque, and incredibly smooth operation. A lot of tuning has been done at the low RPM ranges to improve response. The car won’t hesitate or lag, making the car easier to drive. And with the extra torque you can drive in a higher gear and not have to downshift as often. Theoretically this means better fuel mileage too!

    1999-2000 Z3 2.3 Performance Software Peak Power Gains
    HP Gain + 14 @ 6000 RPM
    Torque Gain + 6 @ 5000 RPM
    New Rev Limit 7000 RPM

    M52tu 2.5-liter dyno chart -
    E46 323, Z3 2.3

    Features:

    • Dyno developed and tuned
    • 1-touch operation
    • LED lights guide you through installation
    • Plug-in to your car's diagnostic port - removal of the computer is not necessary
    • USB connection for downloading updates, new files
    • Works with 91-95 octane fuel
    • Re-install stock software at any time; switch between stock and performance software

    Benefits:

    • Unlock torque and horsepower
    • Smoother engine with less hesitation
    • Improved throttle response
    • Rev limit increased to 7000
    • Top speed limiter removed
    • Installs in minutes!

    Please note, performing this software update requires the use of a 10 amp (or greater) battery charger. If you do not have an adequate charger, we carry one, for your convenience which can be added below. Click here for installation instructions.

    Click here for our FAQ file for the Shark Injector

    This programmer works for 1999 and 2000 Z3 2.3 liter (M52tu engine) roadsters and coupes.


    Applications: 1999-2000 Z3 2.3 (Z3)
    Part #: Z3-2.3-PERFORMANCE-SOFTWARE
    Price:   $299.95
    Options: Add a 2/10/55 amp battery charger?
    Options: Add USB Cable for updates?

    Email a Friend
    People who like this product also like these products:
  • Battery Charger - 12-Volt 2/10/55 Amp with Engine Start
  • USB Cable for USB Shark Injector
    		•

    click to enlarge
    		 Z3 2.5 Conforti Shark Injector Engine Software - 2001-2003 Z3 2.5
    Performance Software System for Z3 2.5 M54 2001-2002

    The Shark Injector is an amazing hand-held unit that plugs into your car’s diagnostic port and re-flashes the computer with performance software. The software was developed by renowned BMW tuner Jim Conforti, who has nearly 20 years of BMW engine tuning experience. The Shark Injector is one of the safest and most cost-effective enhancements you can do – offering features and results that other upgrades simply cannot touch. The Shark Injector is also upgrade-able through its own USB port, allowing you to upgrade to different software as your needs and modifications change.

    This software is a major refinement of the stock software. It makes the car much easier to drive with less hesitation, more torque, and incredibly smooth operation. A lot of tuning has been done at the low RPM ranges to improve response. The car won’t hesitate or lag, making the car easier to drive. And with the extra torque you can drive in a higher gear and not have to downshift as often. Theoretically this means better fuel mileage too!

    2001-2002 Z3 2.5 Performance Software Peak Power Gains
    HP Gain + 7 @ 5800 RPM
    Torque Gain + 7 @ 4700 RPM
    New Rev Limit 7000 RPM

    M54 engine dyno chart -
    E46 325, Z3 2.3 (2.5-liter)

    Features:

    • Dyno developed and tuned
    • 1-touch operation
    • LED lights guide you through installation
    • Plug-in to your car's diagnostic port - removal of the computer is not necessary
    • USB connection for downloading updates, new files
    • Works with 91-95 octane fuel
    • Re-install stock software at any time; switch between stock and performance software

    Benefits:

    • Unlock torque and horsepower
    • Smoother engine with less hesitation
    • Improved throttle response
    • Rev limit increased to 7000
    • Top speed limiter removed
    • Installs in minutes!

    Please note, performing this software update requires the use of a 10 amp (or greater) battery charger. If you do not have an adequate charger, we carry one, for your convenience which can be added below. Click here for installation instructions.

    Click here for our FAQ file for the Shark Injector

    This programmer works for 2001 and 2002 Z3 2.5 liter (M54 engine) roadsters and coupes.


    Applications: 2001-Feb. 2003 Z3 2.5 liter (Z3)
    Part #: Z3-2.5-PERFORMANCE-SOFTWARE
    Price:   $299.95
    Options: Add a 2/10/55 amp battery charger?
    Options: Add USB Cable for updates?

    Email a Friend
    People who like this product also like these products:
  • Battery Charger - 12-Volt 2/10/55 Amp with Engine Start
  • USB Cable for USB Shark Injector
    		•

    click to enlarge
    		 Z3 3.0 Conforti Shark Injector Engine Software - 2001-2003 Z3 3.0
    Performance Software System for Z3 3.0 M54 2001-2002

    The Shark Injector is an amazing hand-held unit that re-flashes your car with performance software. What really sets this software apart is how easy and effective it is without any further modifications. This software tool re-flashes the stock BMW computer through your car’s diagnostic port and was developed by renowned BMW tuner Jim Conforti, who has nearly 20 years of BMW engine tuning experience. The Shark Injector is one of the safest and most cost-effective enhancements you can do – offering features and results that other upgrades simply cannot touch. The Shark Injector is also upgrade-able through its own USB port, allowing you to upgrade to different software as your needs and modifications change.

    This software is a major refinement of the stock software. It makes the car much easier to drive with less hesitation, more torque, and incredibly smooth operation. A lot of tuning has been done at the low RPM ranges to improve response. The car won’t hesitate or lag, making the car easier to drive. And with the extra torque you can drive in a higher gear and not have to downshift as often. Theoretically this means better fuel mileage too!

    2001-2002 Z3 3.0 Performance Software Peak Power Gains
    HP Gain + 4 @ 6100 RPM
    Torque Gain + 7 @ 3400 RPM
    New Rev Limit 7000 RPM

    M54 engine dyno chart -
    E39 530, E46 330, Z3 3.0

    Features:

    • Dyno developed and tuned
    • 1-touch operation
    • LED lights guide you through installation
    • Plug-in to your car's diagnostic port - removal of the computer is not necessary
    • USB connection for downloading updates, new files
    • Works with 91-95 octane fuel
    • Re-install stock software at any time; switch between stock and performance software

    Benefits:

    • Unlock torque and horsepower
    • Smoother engine with less hesitation
    • Improved throttle response
    • Rev limit increased to 7000
    • Top speed limiter removed
    • Installs in minutes!

    Please note, performing this software update requires the use of a 10 amp (or greater) battery charger. If you do not have an adequate charger, we carry one, for your convenience which can be added below. Click here for installation instructions.

    Click here for our FAQ file for the Shark Injector

    This programmer works for 2001 and 2002 Z3 3.0 liter roadsters and coupes.


    Applications: 2001-2002 Z3 3.0 liter (Z3)
    Part #: Z3-3.0-PERFORMANCE-SOFTWARE
    Price:   $299.95
    Options: Add a 2/10/55 amp battery charger?
    Options: Add USB Cable for updates?

    Email a Friend
    People who like this product also like these products:
  • Battery Charger - 12-Volt 2/10/55 Amp with Engine Start
  • USB Cable for USB Shark Injector
    		•

    click to enlarge
    		 Z4 2.5/3.0 Conforti Shark Injector Engine Software - For 2003, 2004 & 2005 with Manual Transmission
    Performance Software System for Z4 2.5/3.0 - 2003-2005 (manual transmission only)
    This amazing hand-held unit downloads the TMS/Conforti performance engine software directly into your BMW. The Shark Injector™ provides an easy to install OBD-II performance upgrade, in minutes! TMS / Conforti Performance Engine Software represents the most cost-effective approach to increasing engine performance. It has been dyno-tested to provide a safe increase in power by altering fuel enrichment, cam timing and ignition timing specifically for use with premium gasoline. TMS OBD-II Performance Engine Software also provides an increase in the factory rev-limit allowing for optimum shift points for maximum acceleration. Not only do we re-map part-throttle fuel and spark, we also re-map other areas of chips other tuners don't touch - such as acceleration enrichment, transition fueling (how the car responds to rapid change in pedal, and VANOS control as needed to optimize the vehicle for operation on premium fuel (91+ octane).

    This programmer works for all manual transmission 2003, 2004, 2005 Z4 2.5 liter and Z4 3.0 liter roadsters and coupes. The 2003-2005 Z4 used the M54 engine, which is compatible with this software update.

    Click here for installation instructions.

    Click here for our FAQ file for the Shark Injector

    Please note, performing this software update requires the use of a 10 amp (or greater) battery charger. If you do not have an adequate charger, we carry one, for your convenience which can be added below.
    Applications: 2003-2005 Z4 2.5, Z4 3.0 (Z4)
    Part #: Z4-PERFORMANCE-SOFTWARE
    Price:   $299.95
    Options: Choose your car:
    Options: Add a 2/10/55 amp battery charger?
    Options: Add USB Cable for updates?

    Email a Friend
    People who like this product also like these products:
  • Battery Charger - 12-Volt 2/10/55 Amp with Engine Start
  • USB Cable for USB Shark Injector
    		•

    click to enlarge
    		 Z8 Conforti Shark Injector Engine Software - 2000-2003 Z8
    Performance Software System for Z8 2000-2003
    This amazing hand-held unit downloads the TMS/Conforti performance engine software directly into your BMW. The Shark Injector™ provides an easy to install OBD-II performance upgrade, in minutes! TMS / Conforti Performance Engine Software represents the most cost-effective approach to increasing engine performance. It has been dyno-tested to provide a safe increase in power by altering fuel enrichment, cam timing and ignition timing specifically for use with premium gasoline. TMS OBD-II Performance Engine Software also provides an increase in the factory rev-limit allowing for optimum shift points for maximum acceleration. Not only do we re-map part-throttle fuel and spark, we also re-map other areas of chips other tuners don't touch - such as acceleration enrichment, transition fueling (how the car responds to rapid change in pedal, and VANOS control as needed to optimize the vehicle for operation on premium fuel (91+ octane).

    This programmer works for all 2000, 2001, 2002 and 2003 Z8 Roadsters.

    Customizable performance software to suit your Z8's needs!
    • choose between 91 and 93 octane
    • Throttle response improved in both Sport and non-Sport modes
    • Top Speed Limiter Removed
    • choice of several options to make driving your Z8 more enjoyable:

      Standard Performance Software. The car's Sport and DSC functions remain the same as stock but all of the other Shark Injector benefits (more horsepower and torque, smoother engine, quicker throttle response) are added.

      Sport Mode Memory - Even when you turn the ignition off you can keep the Sport mode activated. This is extremely useful if spend all of your time in Sport mode. Now you won't have to repeatedly push the button every time you turn the car on!

      DSC button controls Sport mode - With this feature you can control how the DSC and Sport mode interact. By pressing the DSC button and turning the system off you will automatically engage Sport mode. And by turning DSC back on, the Sport mode will disengage. This effectively de-activates the Sport button on the console. You'll only have to push one button instead of two!

         Click here for our FAQ file for the Shark Injector

    Click here for installation instructions

     Please note, performing this software update requires the use of a 10 amp (or greater) battery charger. If you do not have an adequate charger, we carry one, for your convenience which can be added below.
    Applications: 2000-2003 Z8 (Z8)
    Part #: Z8-PERFORMANCE-SOFTWARE
    Price:   $299.95
    Options: Choose minimum octane
    Options: Choose your option
    Options: Add a 2/10/55 amp battery charger?

    Email a Friend
    People who like this product also like these products:
  • Battery Charger - 12-Volt 2/10/55 Amp with Engine Start
  • USB Cable for USB Shark Injector
    		•

    click to enlarge
    		 Conforti Shark Injector for 1996-1999 323/328/M3
    This amazing hand-held unit downloads the TMS/Conforti performance engine software directly into your BMW. The Shark Injector™ provides an easy to install OBD-II performance upgrade, in minutes! TMS / Conforti Performance Engine Software represents the most cost-effective approach to increasing engine performance. It has been dyno-tested to provide a safe increase in power by altering fuel enrichment, cam timing and ignition timing specifically for use with premium gasoline. TMS OBD-II Performance Engine Software also provides an increase in the factory rev-limit allowing for optimum shift points for maximum acceleration. Not only do we re-map part-throttle fuel and spark, we also re-map other areas of chips other tuners don't touch - such as acceleration enrichment, transition fueling (how the car responds to rapid change in pedal, and VANOS control as needed to optimize the vehicle for operation on premium fuel (91+ octane). This will also work on the 1996-99 E36 323i/328i and all single-vanos M Coupe/Roadster models (1998-2000). CLICK HERE FOR INSTALLATION INSTRUCTIONS.

    Click here for our FAQ file for the Shark Injector

    Please note, performing this software update requires the use of a 10 amp (or greater) battery charger.

    Applications: 1996-2000 M3 328i 328is 323is (E36)
    Part #: INJ3-M20
    Price:   $299.95
    Options: Add a 2/10/55 amp 12V battery charger?
    Options: Add USB Cable for updates?

    Email a Friend

    People who like this product also like these products:
  • Battery Charger - 12-Volt 2/10/55 Amp with Engine Start
  • USB Cable for USB Shark Injector
  • Eurosport Cold-Air Intake Kit for E36 325i / 328i / 323i & M3
    		•

    click to enlarge
    		 E39 528i, E46 323/328 Conforti Shark Injector
    Performance Software System for E39 528i 1999-2000, E46 323/328i/Ci 1999-2000

    The Shark Injector is an amazing hand-held unit that re-flashes your car with performance software. What really sets this software apart is how easy and effective it is without any further modifications. This software tool re-flashes the stock BMW computer through your car’s diagnostic port and was developed by renowned BMW tuner Jim Conforti, who has nearly 20 years of BMW engine tuning experience. The Shark Injector is one of the safest and most cost-effective enhancements you can do – offering features and results that other upgrades simply cannot touch. The Shark Injector is also upgrade-able through its own USB port, allowing you to upgrade to different software as your needs and modifications change.

    This software is a major refinement of the stock software. It makes the car much easier to drive with less hesitation, more torque, and incredibly smooth operation. A lot of tuning has been done at the low RPM ranges to improve response. The car won’t hesitate or lag, making the car easier to drive. And with the extra torque you can drive in a higher gear and not have to downshift as often. Theoretically this means better fuel mileage too!

    1999-2000 E46 323i/Ci (M52tu engine) Performance Software Peak Gains
    HP Gain + 14 @ 6000 RPM
    Torque Gain + 6 @ 5000 RPM
    New Rev Limit 7000 RPM

    E46 323 dyno chart


    1999-2000 E39 528i, E46 328i (M52tu engine) Performance Software Peak Gains
    HP Gain + 15 @ 6200 RPM
    Torque Gain + 12 @ 3500 RPM
    New Rev Limit 7000 RPM

    M52tu engine dyno chart -
    E39 528i, E46 328i/ci, Z3 2.8

    Features:

    • Dyno developed and tuned
    • 1-touch operation
    • LED lights guide you through installation
    • Plug-in to your car's diagnostic port - removal of the computer is not necessary
    • USB connection for downloading updates, new files
    • Works with 91-95 octane fuel
    • Re-install stock software at any time; switch between stock and performance software

    Benefits:

    • Unlock torque and horsepower
    • Smoother engine with less hesitation
    • Improved throttle response
    • Rev limit increased to 7000
    • Top speed limiter removed
    • Installs in minutes!

    Please note, performing this software update requires the use of a 10 amp (or greater) battery charger. If you do not have an adequate charger, we carry one, for your convenience which can be added below. Click here for installation instructions.

    Click here for our FAQ file for the Shark Injector

    This programmer works for 1999, 2000 E39 528i, E46 323i/328i (M52tu 2.3/2.8 engines with MS42 engine management).


    Applications: 1999-2000 528i 323i 323Ci 328i 328Ci (E39 E46)
    Part #: INJ3-OBD
    Price:   $299.95
    Options: Add a 2/10/55 amp 12V battery charger?
    Options: Add USB Cable for updates?

    Email a Friend
    People who like this product also like these products:
  • Battery Charger - 12-Volt 2/10/55 Amp with Engine Start
  • USB Cable for USB Shark Injector
  • Eurosport Cold-Air Intake Kit for E46 323i/323Ci & 328i/328Ci
    		•

    click to enlarge
    		 Conforti Shark Injector for E46 325/330
    Performance Software System for E46 325/330 2001-2006
    Now works on ALL 2001 to 2006 E46! TMS / Conforti Performance Engine Software represents the most cost-effective approach to increasing engine performance. It has been dyno-tested to provide a safe increase in power by altering fuel enrichment, cam timing and ignition timing specifically for use with premium gasoline. TMS OBD-II Performance Engine Software also provides an increase in the factory rev-limit allowing for optimum shift points for maximum acceleration. Not only do we re-map part-throttle fuel and spark, we also re-map other areas of chips other tuners don't touch - such as acceleration enrichment, transition fueling (how the car responds to rapid change in pedal, and VANOS control as needed to optimize the vehicle for operation on premium fuel. This new software for the 2.5 and 3.0 engines is fully octane adaptive. It takes advantage of premium fuels from 91 AKI to 95 AKI and higher. There is no need for separate octane related variants with this software!

    This Shark Injector works on all 2001-2006 E46 325 and 330*, including 325i, 325xi, 325Ci, 330i, 330xi, 330Ci (including ZHP package and the 325 with California/Mass SULEV engine, M56).
    * - not for 3/2003-2005 330i/Ci with automatic transmission or SMG

    Does your 325 have the M56 "SULEV" Engine? Many of the 325's produced for the US -- particularly in California, Massachusetts, and a few other states -- came with a different engine, the M56 which meets "SULEV" (Super Ultra Low Emission Vehicle) emissions classification. A visual inspection of your engine (as shown below) is the best way to determine if your 325 has the M56 SULEV engine.
    Visual Differences of M54 and M56 engine

    2.5 Dyno Data
    3.0 Dyno Data
    Click here for our FAQ file for the Shark Injector

    Please note, performing this software update requires the use of a 10 amp (or greater) battery charger.

    Applications: 2001-2006 325i 325xi 325Ci 330i 330xi 330Ci (E46)
    Part #: INJ3-OBD_E46_325_330
    Price:   $299.95
    Options: Add a 2/10/55 amp 12V battery charger?
    Options: Add USB Cable for updates?
    Options: Select your BMW

    Email a Friend
    People who like this product also like these products:
  • Battery Charger - 12-Volt 2/10/55 Amp with Engine Start
  • USB Cable for USB Shark Injector
  • Eurosport Cold-Air Intake Kit for E46 330i 330Ci & 330xi
    		•

    click to enlarge
    		 E46 M3 Shark Injector OBD-II Performance Programmer
    Performance Software System for E46 M3 2001-2006
    Stock: 278.2 rear wheel Horsepower , 235.3 rear wheel Torque
    Sharked: 284.2 rear wheel Horsepower, 236.9 rear wheel Torque
    Peak Gain 6.0 rear wheel HP and 1.6 rear wheel Torque
    (Note: the max gain (biggest improvement) is 9 rear wheel HP between 7000 and 8000 rpm)

    Customizable performance software to suit your E46 M3
  • Choose between 91 and 93 octane
  • Top Speed Limiter Removed
  • your choice of a stock rev limit or a raised rev limit to 8100 rpm
  • throttle response improved in both Sport and non-Sport modes
  • choice of several options to make driving your M3 more enjoyable:

    Standard Performance Software - The car's Sport and DSC functions remain the same as stock but all of the other Shark Injector benefits (more horsepower and torque, smoother engine, quicker throttle response) are added. Choose from stock rev limit or a raised 8100 rpm rev limit AND Choose your minimum octane requirement (91 or 93).

    Sport Mode Memory - Even when you turn the ignition off you can keep the Sport mode activated. This is extremely useful if spend all of your time in Sport mode. Now you won't have to repeatedly push the button every time you turn the car on! Available with the 8100 rpm rev limit only.

    DSC button controls Sport mode - With this feature you can control how the DSC and Sport mode interact. By pressing the DSC button and turning the system off you will automatically engage Sport mode. And by turning DSC back on, the Sport mode will disengage. This effectively de-activates the Sport button on the console. You'll only have to push one button instead of two! Available with 8100 rpm rev limit only.

    • E46 M3 Dyno
    		 Conforti's Comment: "The most LEGITIMATE hp you can get from an M3 via "software only" - 9 rear wheel HP is about 11 HP at the crank."

    Click here for installation instructions.
    Click here for our FAQ file for the Shark Injector

    Please note, performing this software update requires the use of a 10 amp (or greater) battery charger.

    Applications: 2001-2006 M3 (E46)
    Part #: INJ3-OBD-M3
    Price:   $299.95
    Options: Add USB Cable for updates?
    Options: Choose the minimum octane:
    Options: Choose the rev limit:
    Options: Choose your options:
    Options: Choose your transmission:

    Email a Friend
    People who like this product also like these products:
  • E46 M3 Power Pulley Upgrade Kit
  • E46 M3 Borla Sport Exhaust - ROUND TIP
  • TMS E46 M3 Carbon Fiber Cold Air Intake Kit
    		•

    click to enlarge
    		 Conforti Shark Injector for X5 3.0
    TMS / Conforti Performance Engine Software represents the most cost-effective approach to increasing engine performance. It has been dyno-tested to provide a safe increase in power by altering fuel enrichment, cam timing and ignition timing specifically for use with premium gasoline. TMS OBD-II Performance Engine Software also provides an increase in the factory rev-limit allowing for optimum shift points for maximum acceleration. Not only do we re-map part-throttle fuel and spark, we also re-map other areas of chips other tuners don't touch - such as acceleration enrichment, transition fueling (how the car responds to rapid change in pedal, and VANOS control as needed to optimize the vehicle for operation on premium fuel. This new software for the 2.5 and 3.0 engines is fully octane adaptive. It takes advantage of premium fuels from 91 AKI to 95 AKI and higher. There is no need for separate octane related variants with this software!

    2.5 Dyno Data
    3.0 Dyno Data

    Click here for our FAQ file for the Shark Injector

    Please note, performing this software update requires the use of a 10 amp (or greater) battery charger.

    Applications: 2001-March 2005 X5 3.0 (E53)
    Part #: INJ3-OBD_X5
    Price:   $299.95
    Options: Add a 2/10/55 amp 12V battery charger?
    Options: Add USB Cable for updates?

    Email a Friend

    People who like this product also like these products:
  • Battery Charger - 12-Volt 2/10/55 Amp with Engine Start
  • USB Cable for USB Shark Injector
    		•

    click to enlarge
    		 Conforti Shark Injector for Mini Cooper S
    The Shark InjectorTM installs through the OBD-II port in your car – no need to remove your ECU and ship it anywhere! Shark InjectorTM software re-maps the fuel and ignition data at part-throttle and wide-open throttle to take advantage of high octane fuel. The Injector was developed by Jim Conforti whose BMW programs are generally regarded as the best performance software that money can buy. The Mini software was developed on the dyno in his development facility to give you more horsepower and torque, quicker and smoother throttle response, a higher rev limit, and removal of the top speed limiter. The Shark InjectorTM is compatible with many different modifications: most supercharger pulleys, cold air intake kit, cat-back exhaust, and others so there is no need to re-tune your car after every modification. This is the easiest software tool available for the Mini Cooper S with only a battery charger required for installation. Among the other benefits is the ability to restore your car back to stock for trips to the dealer. Choose from 91 or 93 minimum octane. Comes with comprehensive installation instructions. Works on all 2002-2006 R53 Cooper S (except automatic transmission)!!

    Click here for our FAQ file for the Shark Injector

    Please note, performing this software update requires the use of a 10 amp (or greater) battery charger.

    Applications: 2001-2006 MINI Cooper S (MINI R53)
    Part #: INJ3-MINI
    Price:   $299.95
    Options: Add a 2/10/55 amp 12V battery charger?
    Options: Add USB Cable for updates?
    Options: Choose the minimum octane:

    Email a Friend

    People who like this product also like these products:
  • Battery Charger - 12-Volt 2/10/55 Amp with Engine Start
  • USB Cable for USB Shark Injector
    		•

    click to enlarge
    		 Conforti Shark Injector for X3 2.5 & 3.0 (2004-2005)
    Performance Software System for X3 2004-2005
    This amazing hand-held unit downloads the TMS/Conforti performance engine software directly into your BMW. The Shark Injector™ provides an easy to install OBD-II performance upgrade, in minutes! TMS / Conforti Performance Engine Software represents the most cost-effective approach to increasing engine performance. It has been dyno-tested to provide a safe increase in power by altering fuel enrichment, cam timing and ignition timing specifically for use with premium gasoline. TMS OBD-II Performance Engine Software also provides an increase in the factory rev-limit allowing for optimum shift points for maximum acceleration. Not only do we re-map part-throttle fuel and spark, we also re-map other areas of chips other tuners don't touch - such as acceleration enrichment, transition fueling (how the car responds to rapid change in pedal, and VANOS control as needed to optimize the vehicle for operation on premium fuel (91+ octane).

    This programmer works for 2004 and 2005 X3 2.5 liter and 3.0 liter SAV.

    2.5 Dyno Data
    3.0 Dyno Data
    Click here for our FAQ file for the Shark Injector

    Please note, performing this software update requires the use of a 10 amp (or greater) battery charger.

    Applications: 2004-2005 X3 2.5, X3 3.0 (X3)
    Part #: X3-PERFORMANCE-SOFTWARE
    Price:   $299.95
    Options: Add a 2/10/55 amp 12V battery charger?
    Options: Add USB Cable for updates?
    Options: Select your X3

    Email a Friend
    People who like this product also like these products:
  • Battery Charger - 12-Volt 2/10/55 Amp with Engine Start
  • USB Cable for USB Shark Injector
    		•
    Performance Software: 2005+ Cars

    click to enlarge
    		 TMS Performance Software for BMW E90/E92 335i (N54)
    Performance software for the 2007+ BMW E82 135i E90/E92 335i and E60 535

    We were THE first company in the USA to offer reliable dyno developed performance software for the 135, 335 and 535 - and it makes AMAZING POWER! +70hp and +80lb/ft of torque over stock! That's 330.7 hp to the wheels and 359 lb ft of torque, as measured at the rear wheels -- just imagine how much power that is at the crank! Can you say faster than a M3? There are no down sides of this modification, other than needing 91 or higher octane gas. We modify fuel and spark mapping, adjust the valvaetronic (throttle), and most importantly INCREASE THE BOOST to a safe, reliable amount.

    This is the perfect upgrade for someone who wants a dramatic but safe boost in power -- especially in the low to mid-range. Check out the dyno sheet: with the Stage 1 TMS performance software your car will have MUCH more torque at ALL RPM, including down low (where you want it) for remarkably better torque. This is HUGE torque that is a NIGHT AND DAY difference. If you are in the Boston area, make an appointment to stop by for a road test. Our 335 with this software is simply "Nutty!", as others have put it. 91 or higher octane gasoline is required. Please keep in mind that with a "turbo car" it is "easy" to make horsepower by increasing boost BUT keeping your BMW reliable is the most important thing to Turner motorsport. Others may claim to make more power to make our software seem a little conservative, but we're confident this is the perfect compromise -- the most power made within the safe limits of your engine. Much better than the alternative. If for some reason your dealer "reflashes" your 335 with stock software after you purchase this from TMS, we will reflash your ECU with our software at no charge (except for shipping). We also offer a Stage 2 version which turns off the pre cat oxygen sensors, a must for off road / race cars that have the precats removed. Click here for dyno results.

    Stage 1 includes: Software upgrade

    Video Clip: Dyno Development
    		 Dyno Chart

    The software re-flash is done through TMS. Your (ECU)computer will need to be removed and shipped to TMS. We can usually turn it around in one day, leaving your car only down a short time.

    Click here for instructions for removing the computer.

    Click here for specific instructions on shipping the computer.
    Applications: 2007-2009 135i 335i 535i (E82 E88 E90 E92 E93 E60)
    Part #: TN54-ST1
    Price:   $1,599.00
    Sale Price: $1,299.00
    Savings $300.00

    Options: Choose version

    Email a Friend
    People who like this product also like these products:
  • Limited Slip Differential Unit for E90/E92 335i (LSD)
  • aFe Twin-Filter Intake Kit for E82/E88 135i, E90/E92 335i & 335xi, and E60 535i & 535xi
  • E90/E92 335i & 335xi UUC Corsa Performance Exhaust System
    		•

    click to enlarge
    		 Stage 1 Performance Software for BMW E90/E91 325i (N52) & E60 525i (N52)
    It's here ! Software to bring the power of your E90 325i up closer to the 330i (or your 525i closer to a 530i, or Z4 2.5 closer to a Z4 3.0) is now available. After all - your 325i engine is almost virtually identical to the 330 engine. Both 325 and 330 share the SAME 3.0 liter engine and internals. BUT the 325i came saddled with a more restrictive exhaust & catalytic converters, a single stage intake manifold (vs the 3-stage manifold of the 330i), and BMW's "detuned" engine computer. It's time to get that power back!



    Stage 1 is a reprogram of the current software of your engine computer. We modify the computer's fuel and spark mapping, adjust the throttle, adjust the cam and Valvetronic timing, and remove the top speed limiter - basicaly "unlocking" a good portion of the 330 in your 325. This is the perfect upgrade for someone who wants to boost power, especially in the mid-range, and make the car accelerate faster. We recorded a Maximum gain of 19hp @4700 RPM and 15ft-lbs of torque gain @4500 RPM on our Dynapack dyno. The seat of your pants gain is amazing -- its like driving a different car after this software change. There are NO downsides of doing this except 91 or higher octane gasoline is required.

    Maximum gain: the largest difference in the curve before and after the software change. This is different than "peak gain" -- the gain from where the highest HP and Torque figure were before the software was installed. The gains made by this software between 3500 and 5500 are simply a night and day change!

    Stage 1 includes: software upgrade

    Peak HP: 219hp @6400rpm Max HP gain = 19 hp @4700rpm
    Peak Trq: 200lb/ft @4500rpm Max Trq gain = 15 ft-lbs @4500rpm

    The software re-flash is done in-house at TMS. Your computer will need to be removed and shipped to TMS then we can ship it back overnight to you.

    Click here for instructions for removing the computer.

    Click here for specific instructions on shipping the computer.
    Applications: 2005-2006 325i, 525i, Z4 2.5 (E90 E91 E60 Z4)
    Part #: TN52-ST1
    Price:   $1,299.00
    Sale Price: $999.00
    Savings $300.00


    Email a Friend
    Borla Cat-Back Exhausts

    click to enlarge
    		 E30 M3 Borla Cat-back Muffler System
    100% stainless-steel; 76mm dual round tips, for E30 M3; 7-8hp gain; 2MB Sound Byte
    Applications: 1987-1991 M3 (E30)
    Part #: 11283
    Price:   $892.99
    Sale Price: $758.66
    Savings $134.33


    Email a Friend
    People who like this product also like these products:
  • E30 M3 Exhaust Hanger Kit
    		•

    click to enlarge
    		 E46 325/330i/Ci 2001-2005 Borla Exhaust System

    What is in the box:

    -100% T-304 stainless steel 3 pc. cat-back sport exhaust system
    -100% stainless hardware and muffler clamps
    -Warranty card

    Warranty Info:

    BORLA MILLION-MILE WARRANTY

    Click here for a independent review of this system!
    Applications: 2001-2005 325i,Ci, 330i, Ci (E46)
    Part #: 140084
    Price:   $1,299.00
    Sale Price: $1,099.00
    Savings $200.00


    Email a Friend

    click to enlarge
    		 E46 M3 Borla Sport Exhaust - ROUND TIP
    The Borla Sport Muffler System for the new E46 M3 features 100% T-304 stainless steel construction, 1,000,000 Borla Warranty and has four 3" (76mm) round tips. Installation is a breeze! Sounds and looks great. Borla claims a 12HP gain with this system. This system weighs in at 37 LBS! The average decibel level with this system when tested was 82.8 db. which is well under the California Limit of 94 db.

    Click here for a flow test, Borla vs. Eisenmann.  (Data provided by Borla)
    Applications: 2001-2006 M3 (E46)
    Part #: 140034
    Price:   $1,499.00
    Sale Price: $1,274.00
    Savings $225.00


    Email a Friend
    People who like this product also like these products:
  • Borla Midpipe / X-Pipe for E46 M3 (V2)
  • E46 M3 Shark Injector OBD-II Performance Programmer
  • E46 M3 Borla Sport Exhaust - OVAL TIP (Limited Time Special Price!)
    		•
    Headers

    click to enlarge
    		 E36 / E36M3 / Z3 Shorty Headers
    50 STATE LEGAL! A Turner Motorsport developed part, our "shorty style" performance Headers are 100% stainless steel, are 2-stage ceramic coated and were CAD designed to be equal length and flow with equal pressure. These headers were designed to increase mid range power. Bolt these on to your stock E36 M3/325/328 or Z3/MZ3 for a instant increase of 12 ft-lb torque and a 9 HP... more on modified engines!

    We have 2 versions of these. One for 1992-1995 OBDI cars (M3, 325i & 325is) and another that covers all the 1996 to 1999 OBDII cars which have proper air-injection ports to ensure no fault codes or check engine lights. If you are comparing our headers to "the other guys", be sure to take a look at the outside TIG welding of ours (for smoother flow) and the equal length of all our runners (increased efficiency.)

    Stainless steel construction retains heat much better than the competitor's mild steel construction, resulting in increased exhaust velocity. If you want the best shorty header on the market, this is the one. (Pictured are OBD1 headers.) Unlike other headers on the market, the TMS Shorty headers bolt directly up to stock BMW catalytic converter! Don't be fooled by cheap, non stainless imitations that sell for less than ours. Trust us: you get what you pay for.

    This Shorty Performance Header fits the following BMWs:
    1992-1995 E36 3 Series 325i & 325is (OBDI version)
    1994-1995 E36 M3 3.0 liter (OBDI version)
    1996-1999 E36 3 Series 328i, 328is & 323is (OBDII)
    1996-1999 E36 M3 3.2 liter (OBDII version)
    1997-1999 Z3 Roadster/Coupe including 2.3, 2.5 & 2.8
    1997-2000 MZ3 M Roadster & M Coupe 3.2 liter (S52 engine)

    Special Sale! Only $699 for OBD-I, and $749 for OBD-II!
    Applications: 1992-1999 325, 328, M3, Z3, MZ3 (M50/M52) (E36)
    Part #: SHORTYHEADER
    Price:   $999.95
    Sale Price: $699.00
    Savings $300.95

     Options: Choose Year of Car:
    Options: Include Exhaust Gaskets?

    Email a Friend
    Eurosport Cold-Air Intake Kits

    click to enlarge
    		 Eurosport Cold-Air Intake Kit for E36 M3 with 3.5 inch HFM (Euro, 540i or Porsche)
    This is the Eurosport Intake for a Euro 3.5” HFM (Euro M3, 540 HFM, Porsche HFM, etc). This cold air intake features composite materials for better heat resistance than metal intake kits. The heat shield is made of composite e-glassfiber and the intake tube is compression-molded carbon fiber. The Eurosport Intake uses a ITG cone-style air filter, which has proved make more horsepower on the dyno than similar cone air filters. Altogther, this kit weighs less than 6lbs. Hardware, detailed instructions, and dust retention oil is included (filter is pre-oiled). When installed, the shield provides a tight seal in the engine bay for the filter to draw cool air. The black finish with carbon fiber, and excellent craftsmanship, provides a “factory appearance”, showing off in a subtle way.

    NOTE: This kit does not include the 3.5" HFM. You must supply your own HFM. This is the intake kit only (see picture above for included parts).
    Applications: 1995-1999 M3 (E36)
    Part #: JCINTAKEEURO
    Price:   $399.95

    Email a Friend
    People who like this product also like these products:
  • Euro HFM
  • Stage 2 - E36 M3 TMS / Conforti / Euro Intake Kit with 24LB Fuel Injectors
  • Stage 3 - E36 M3 TMS / Conforti Euro HFM/Schrick Camshaft Upgrade Kit
    		•
    aFe Cold-Air Intake Kits

    click to enlarge
    		 aFe Intake Kit - E36 6-cylinder Incl M3, 1992-1999
    aFe Intake Kit - E36 6-cylinder Incl M3, 1992-1999
    aFe Magnum FORCE Stage 1 Cold Air Intake System. This intake kit replaces your restrictive factory air box. It features a black composite/molded tube, 16-gauge powder-coated steel heat shield, trim sealed to seal out hot engine air, and a custom aFe brand cotton filter.

    aFe has reported gains of up to 25 hp and 25 lb/ft of torque when used on an M3. For maximum benefit, we recommend upgrading your engine software -- a Conforti chip for 1992-1995 or Shark Injector software for 1996-1999 cars.

    This aFe intake kit fits all 1992-1999 E36 chassis 3 series 6 cylinder, including:
    1992-1995 - 325i, 325is & M3 3.0 liter
    1996-1998 - 328i, 328is, 323is and M3 3.2 liter.
    1999-1999 - 328is, 323is, and M3 3.2 liter

     

    Simple installation using only basic tools, requiring no drilling or modifications to your BMW.

    Click here for installation instructions.

    Want an extra layer of defense? Add a pre-filter to prevent water, mud and sand from congesting your air intake system. This simple upgrade slides over the aFe filter of this intake kit, much like a sock, giving you an extra layer of defense, and extending the cleaning interval of your aFe intake's filter element. Best of all, using the Pre-Filter does not significantly diminish your air filter’s performance—the smooth rush of oxygen keeps rolling right into your engine. To add the pre-filter, just select the option for the drop-down option below.

    Applications: 1992-1999 M3 325i 325is 328i 328is 323is (E36)
    Part #: 54-10171
    Price:   $328.13
    Sale Price: $269.95
    Savings $58.18

    Options: Add a pre-filter?

    Email a Friend
    People who like this product also like these products:
  • aFe Pre-Filter for aFe Intake Kits # 54-10171, 54-10441 & 54-10451
  • aFe Filter Restore Kit
    		•

    click to enlarge
    		 aFe Intake Kit - E36 6-cylinder with Euro / 3.5 inch HFM
    aFe Intake Kit - E36 6-cylinder with Euro / 3.5 inch HFM
    aFe's well known cold air intake kit, Now available for those with 1995 M3 who have converted from the stock US "325" 3.0" air sensor to the popular 3.5" Euro M3 version. If you've upgraded your stock 1995 M3 3.0" mass air sensor to the larger 3.5" version (from either the Euro M3 or 540), this kit has the correct sized intake tube and coupling for your application.

    Please note: If you are planning to use a 3.5" HFM on your 1995 M3, be SURE you are using the correct software/chip. We have been supplying the software for the Euro HFM conversion for many years, as developed by performance software Guru, Jim Confori. This chip provides a smooth power delivery from low RPM up to redline and the most power.

    Features all the standard features of the aFe Magnum Force Cold air intake system -- black composite/molded tube, 16-gauge powder-coated steel heat shield, trim sealed to seal out hot engine air, custom aFe brand cotton filter, and full installation instructions. Euro HFM and software not included.

    Applications: 1995-1995 M3 (E36)
    Part #: 54-11362
    Price:   $399.95
    Sale Price: $299.95
    Savings $100.00
    Email a Friend
    People who like this product also like these products:
  • Euro HFM
  • E36 M3 1995 Custom Conforti Performance Chip (HFM, Schrick cams, 24# injectors)
  • E36 6 Cyl Samco Silicone Intake Boot (for upgraded 3.5 inch HFM)
    		•

    click to enlarge
    		 aFe Filter Restore Kit
    aFe's highly refined oil is proven less likely to foul MAF sensors than other oil. It works great with aFe filters and is a great way to upgrade competitive oiled filters. aFe cleaner is specially formulated to release dirt without harming the microfibers critical to efficient filtration. It has a simple three step restoration procedure. Available in either aerosol or squeeze bottle.
    Applications: 1992-2009 many (E36 E46 E90 E92 E39 E60 E63 Z3 X3 X5)
    Part #: 90-50501
    Price:   $12.49
    Options: Aerosol or Squeeze Bottle?

    Email a Friend

    click to enlarge
    		 aFe Intake Kit - E39 528i & 525i
    aFe Magnum FORCE Stage 1 Cold Air Intake System for E39 525i and 528i (no 530i or 540i).

    This intake kit replaces your restrictive factory air box. It features a 3-angle aluminum velocity stack adapter, 16-gauge powder-coated steel heat shield, trim sealed to seal out hot engine air, and a custom aFe brand cotton filter.

    By removing your stock intake air box, you are removing the most restrictive portion of your intake system, increasing both horse power and torque, improving acceleration as well as throttle response.

    For the maximum benefit in performance, we recommend upgrading your engine software with the Shark Injector     (Click here for more info on the Shark Injector performance software.)

    Click here for installation instructions.

    Want an extra layer of defense? Add a pre-filter to prevent water, mud and sand from congesting your air intake system. This simple upgrade slides over the aFe filter of this intake kit, much like a sock, giving you an extra layer of defense, and extending the cleaning interval of your aFe intake's filter element. Best of all, using the Pre-Filter does not significantly diminish your air filter’s performance—the smooth rush of oxygen keeps rolling right into your engine. To add the pre-filter, just select the option for the drop-down option below.

    Applications: 1997-2003 525i, 528i (E39)
    Part #: 54-10601
    Price:   $412.04
    Sale Price: $319.95
    Savings $92.09

    Options: Add a pre-filter?

    Email a Friend
    People who like this product also like these products:
  • E39 6cyl Power Pulley Kit
  • E39 525i 01-03 Conforti Shark Injector Engine Software
  • E39 528i Conforti Shark Injector Engine Software - 1997-2000 528i
    		•

    click to enlarge
    		 aFe Intake Kit - E39 540i Stage I
    aFe Magnum FORCE Stage 1 Cold Air Intake System for E39 540i 1997-2003.

    This intake kit replaces your restrictive factory air box. It features a 3-angle aluminum velocity stack adapter, 16-gauge powder-coated steel heat shield, trim sealed to seal out hot engine air, and a custom aFe brand cotton filter.

    By removing your stock intake air box, you are removing the most restrictive portion of your intake system, increasing both horse power and torque, improving acceleration as well as throttle response.

    aFe has reported gains as high as 25 hp and 35 lb/ft torque for these kits, depending on application.

    Click here for installation instructions.

    Want an extra layer of defense? Add a pre-filter to prevent water, mud and sand from congesting your air intake system. This simple upgrade slides over the aFe filter of this intake kit, much like a sock, giving you an extra layer of defense, and extending the cleaning interval of your aFe intake's filter element. Best of all, using the Pre-Filter does not significantly diminish your air filter’s performance—the smooth rush of oxygen keeps rolling right into your engine. To add the pre-filter, just select the option for the drop-down option below.

    Applications: 1997-2003 540i (E39)
    Part #: 54-10471
    Price:   $399.76
    Sale Price: $309.95
    Savings $89.81

    Options: Add a pre-filter?

    Email a Friend
    People who like this product also like these products:
  • aFe Pre-Filter for aFe Intake Kit # 54-10471
  • aFe Filter Restore Kit
    		•

    click to enlarge
    		 aFe Intake Kit - E39 M5 Stage II
    aFe Magnum FORCE Stage 2 Cold Air Intake System for E39 M5.

    This intake kit replaces the top-half of both your factory air boxes. It features two 3-angle aluminum velocity stack adapters, 16-gauge powder-coated steel heat shields, trim sealed to seal out hot engine air, two custom aFe brand cotton filters, all hardware, and installation instructions.

    By converting your stock intake air boxes, you are improving the most restrictive portion of your M5's intake system, increasing horse power by 10 hp, torque by 10 lb/ft, improving acceleration as well as throttle response.

    10hp max gain, 10 lb/ft torque max gain

    Click here for installation instructions.
    Applications: 2000-2003 M5 (E39)
    Part #: 54-10852
    Price:   $574.80
    Sale Price: $439.95
    Savings $134.85


    Email a Friend
    People who like this product also like these products:
  • Performance Software System for E39 M5
  • aFe Filter Restore Kit
    		•

    click to enlarge
    		 aFe Intake Kit - E39 530i
    aFe Magnum FORCE Stage 1 Cold Air Intake System for E39 530i.

    This intake kit replaces your restrictive factory air box. It features a 3-angle aluminum velocity stack adapter, 16-gauge powder-coated steel heat shield, trim sealed to seal out hot engine air, and a custom aFe brand cotton filter.

    By removing your stock intake air box, you are removing the most restrictive portion of your intake system, increasing both horse power and torque, improving acceleration as well as throttle response.

    For the maximum benefit in performance, we recommend upgrading your engine software with the Shark Injector     (Click here for more info on the Shark Injector performance software.)

    Click here for installation instructions.

    Want an extra layer of defense? Add a pre-filter to prevent water, mud and sand from congesting your air intake system. This simple upgrade slides over the aFe filter of this intake kit, much like a sock, giving you an extra layer of defense, and extending the cleaning interval of your aFe intake's filter element. Best of all, using the Pre-Filter does not significantly diminish your air filter’s performance—the smooth rush of oxygen keeps rolling right into your engine. To add the pre-filter, just select the option for the drop-down option below.

    Applications: 2001-2003 530i (E39)
    Part #: 54-10671
    Price:   $412.04
    Sale Price: $319.95
    Savings $92.09

    Options: Add a pre-filter?

    Email a Friend
    People who like this product also like these products:
  • aFe Pre-Filter for aFe Intake Kits # 54-10461, 54-10601, 54-10671 & 54-10681
  • E39 530i 01-03 Conforti Shark Injector Engine Software
  • E39 6cyl Power Pulley Kit
    		•

    click to enlarge
    		 aFe Intake Kit - E46 323/325/328i & Ci 1999 to 2003
    aFe Magnum FORCE Stage 1 Cold Air Intake System. Fits all 1999-2003 3 series (E46), except M3, as well as X3 2.5 2004 thru 2007.

    This intake kit replaces your restrictive factory air box. It features a 3-angle aluminum velocity stack adapter, 16-gauge powder-coated steel heat shield, trim sealed to seal out hot engine air, and a custom aFe brand cotton filter.

    By removing your stock intake air box, you are removing the most restrictive portion of your intake system, increasing both horse power and torque, improving acceleration as well as throttle response.

    For the maximum benefit in performance, we recommend upgrading your engine software with the Shark Injector     (Click here for more info on the Shark Injector performance software.)

    Click here for installation instructions.

    Want an extra layer of defense? Add a pre-filter to prevent water, mud and sand from congesting your air intake system. This simple upgrade slides over the aFe filter of this intake kit, much like a sock, giving you an extra layer of defense, and extending the cleaning interval of your aFe intake's filter element. Best of all, using the Pre-Filter does not significantly diminish your air filter’s performance—the smooth rush of oxygen keeps rolling right into your engine. To add the pre-filter, just select the option for the drop-down option below.

    Applications: 1999-2003 323i, 323Ci, 325i, 325Ci, 328i, 328Ci and X3 2.5i (E46)
    Part #: 54-10441
    Price:   $461.24
    Sale Price: $384.95
    Savings $76.29

    Options: Add a pre-filter?

    Email a Friend
    People who like this product also like these products:
  • Conforti Shark Injector for E46 325/330
  • aFe Filter Restore Kit
    		•

    click to enlarge
    		 aFe Intake Kit - E46 330i/Ci (all) & 325i/Ci (2003-2005)
    aFe Magnum FORCE Stage 1 Cold Air Intake System for E46 330i and 330Ci, 2004-2005 325i/Ci. Also fits X3 3.0, 2004-2007.

    This intake kit replaces your restrictive factory air box. It features a 3-angle aluminum velocity stack adapter, 16-gauge powder-coated steel heat shield, trim sealed to seal out hot engine air, and a custom aFe brand cotton filter.

    By removing your stock intake air box, you are removing the most restrictive portion of your intake system, increasing both horse power and torque, improving acceleration as well as throttle response.

    aFe has reported gains as high as 20 hp and 27 lb/ft torque on the 330i

    For the maximum benefit in performance, we recommend upgrading your engine software with the Shark Injector     (Click here for more info on the Shark Injector performance software.)

    Click here for installation instructions.

    Want an extra layer of defense? Add a pre-filter to prevent water, mud and sand from congesting your air intake system. This simple upgrade slides over the aFe filter of this intake kit, much like a sock, giving you an extra layer of defense, and extending the cleaning interval of your aFe intake's filter element. Best of all, using the Pre-Filter does not significantly diminish your air filter’s performance—the smooth rush of oxygen keeps rolling right into your engine. To add the pre-filter, just select the option for the drop-down option below.

    Applications: 2001-2005 330i, 330Ci, 325i, X3 3.0i (E46)
    Part #: 54-10451
    Price:   $473.56
    Sale Price: $369.95
    Savings $103.61

    Options: Add a pre-filter?

    Email a Friend
    People who like this product also like these products:
  • aFe Pre-Filter for aFe Intake Kits # 54-10171, 54-10441 & 54-10451
  • Conforti Shark Injector for E46 325/330
  • aFe Filter Restore Kit
    		•

    click to enlarge
    		 aFe Intake Kit - E46 M3 Stage I
    aFe Magnum FORCE Stage 1 Cold Air Intake System for E46 M3.

    This intake kit replaces your restrictive factory air box. It features a 3-angle aluminum velocity stack adapter, 16-gauge powder-coated steel heat shield, trim sealed to seal out hot engine air, and a custom aFe brand cotton filter.

    By removing your stock intake air box, you are removing the most restrictive portion of your M3's intake system, increasing both horse power and torque, improving acceleration as well as throttle response.

    10 hp max gain at 6200 rpm!
    5 lb/ft torque at 5000rpm!


    Click here for installation instructions.

    Want an extra layer of defense? Add a pre-filter to prevent water, mud and sand from congesting your air intake system. This simple upgrade slides over the aFe filter of this intake kit, much like a sock, giving you an extra layer of defense, and extending the cleaning interval of your aFe intake's filter element. Best of all, using the Pre-Filter does not significantly diminish your air filter’s performance—the smooth rush of oxygen keeps rolling right into your engine. To add the pre-filter, just select the option for the drop-down option below.

    Applications: 2001-2006 M3 (E46)
    Part #: 54-10461
    Price:   $830.26
    Sale Price: $649.95
    Savings $180.31

    Options: Add a pre-filter?

    Email a Friend
    People who like this product also like these products:
  • aFe Pre-Filter for aFe Intake Kits # 54-10461, 54-10601, 54-10671 & 54-10681
  • E46 M3 Shark Injector OBD-II Performance Programmer
  • aFe Filter Restore Kit
    		•

    click to enlarge
    		 aFe Intake Kit - E46 M3 Stage II
    aFe Magnum FORCE Stage 2 Cold Air Intake System for E46 M3.

    This intake kit replaces your restrictive factory air box. It features 16-gauge powder-coated steel heat shield, trim sealed to seal out hot engine air, and a custom aFe brand cotton filter.

    By removing your stock intake air box, you are removing the most restrictive portion of your M3's intake system, increasing both horse power and torque, improving acceleration as well as throttle response.

    12 hp gain at 4900 rpm!
    11 lb/ft torque at 4900rpm!


    Click here for installation instructions.
    Applications: 2001-2006 M3 (E46)
    Part #: 54-10462
    Price:   $638.80
    Sale Price: $449.95
    Savings $188.85


    Email a Friend
    People who like this product also like these products:
  • E46 M3 Shark Injector OBD-II Performance Programmer
  • aFe Filter Restore Kit
    		•

    click to enlarge
    		 aFe Intake Kit - X5 4.4 and 4.8 liter 2001-2006
    aFe Magnum FORCE Stage 1 Cold Air Intake System for X5 4.4i 2001-2006 (E85)

    This intake kit replaces your restrictive factory air box. It features a 3-angle velocity stack adapter, 16-gauge powder-coated steel heat shield, trim sealed to seal out hot engine air, and a custom aFe brand cotton filter.

    By removing your stock intake air box, you are removing the most restrictive portion of your X5's intake system, increasing both horse power and torque, improving acceleration as well as throttle response.

    Click here for installation instructions.

    Want an extra layer of defense? Add a pre-filter to prevent water, mud and sand from congesting your air intake system. This simple upgrade slides over the aFe filter of this intake kit, much like a sock, giving you an extra layer of defense, and extending the cleaning interval of your aFe intake's filter element. Best of all, using the Pre-Filter does not significantly diminish your air filter’s performance—the smooth rush of oxygen keeps rolling right into your engine. To add the pre-filter, just select the option for the drop-down option below.

    Applications: 2001-2006 X5 4.4i, X5 4.8is (E53 X5)
    Part #: 54-10681
    Price:   $399.76
    Sale Price: $319.95
    Savings $79.81

    Options: Add pre-filter to this kit?

    Email a Friend
    People who like this product also like these products:
  • aFe Pre-Filter for aFe Intake Kits # 54-10461, 54-10601, 54-10671 & 54-10681
  • aFe Filter Restore Kit
    		•

    click to enlarge
    		 aFe Intake Kit - E60 525i & 530i
    aFe Magnum FORCE Stage 2 Cold Air Intake System for E60 525i and 530i.

    This intake kit replaces your restrictive factory air box. It features a 16-gauge powder-coated steel heat shield, heat-resistant molded intake tube, trim sealed to seal out hot engine air, and a custom application-specific aFe brand cotton filter.

    By removing your stock intake air box, you are removing the most restrictive portion of your 5 series' intake system, increasing both horse power and torque, improving acceleration as well as throttle response.

    Click here for installation instructions.
    Applications: 2006-- 525i/530i (N52) (E60)
    Part #: 54-11042
    Price:   $362.86
    Sale Price: $279.95
    Savings $82.91


    Email a Friend
    People who like this product also like these products:
  • aFe Filter Restore Kit
    		•

    click to enlarge
    		 aFe Intake Kit - 550i & 650i (E60/E63) Stage 2
    aFe Magnum FORCE Stage 2 Cold Air Intake System for 550i and 650i (E60/E63).
    11.75 hp and 10.50 lb/ft torque gain!

    This intake kit replaces your restrictive factory air box. It features a 3-angle velocity stack adapter, heat-block molded intake tube, 16-gauge powder-coated steel heat shield, trim sealed to seal out hot engine air, and a custom aFe brand cotton filter.

    By removing your stock intake air box, you are removing the most restrictive portion of your V8's intake system, increasing both horse power and torque, improving acceleration as well as throttle response.

    11.75 hp gain at 5900 rpm
    10.50 lb/ft torque at 4000rpm

    Click here for installation instructions.
    Applications: 2006-2007 550i, 650i (E60 E63)
    Part #: 54-11142
    Price:   $478.80
    Sale Price: $369.95
    Savings $108.85


    Email a Friend
    People who like this product also like these products:
  • aFe Filter Restore Kit
    		•

    click to enlarge
    		 aFe Cold Air Intake Kit for E60 M5 & E63/E64 M6 V10
    Rid your M5 or M6's V10 powerplant of both of its restrictive factory air boxes with this cold air intake kit by aFe, and you'll cut the airflow restriction IN HALF. Air flow showed an increase of 117% and dyno testing yielded max power gains of 28hp and 24 ft/lbs of torque. The intake tubes of this kit are custom-designed to accelerate airflow for best performance. Fits all 2006, 2007, 2008 and 2009 and V10 M5 and M6.

    Kit includes everything necessary to install, including installation instructions. This kit can typically be installed in less than 60 minutes, and uses all factory mounting points (no modifications). The kit uses 2 high performance 360 degree radial flow air filters which are washable/reusable. The filtration media uses the deepest pleats in the industry, allowing the most surface area and airflow possible, in the space allowed. The increased airflow is significant enough that it is audible while driving, giving your 5.0 liter V10 a subtly more aggressive sound when revving or under load. Best of all, this is a SAFE product that will not cause any longevity issues or malfunctions to your BMW's intricate engine management system.

    This aFe Cold Air Intake Kit fits the following BMWs:
    2006,2007,2008,2009 E60 M5 Sedan
    2006,2007,2008,2009 E63 M6 Coupe
    2006,2007,2008,2009 E64 M6 Convertible

    Special Limited Time Bonus! Order now, and receive a pair of aFe pre-filters to compliment your kit! The pre-filters act like a thin sock to prevent water, mud and sand from congesting your air intake system. This simple upgrade slides over the aFe filter of this intake kit, giving you an extra layer of defense, and extending the cleaning interval of your aFe intake's filter element. Best of all, using the Pre-Filter does not significantly diminish your air filter’s performance—the smooth rush of oxygen keeps rolling right into your engine. Included FREE if you order now.

    Click here for installation instructions.
    Applications: 2006-2009 M5 M6 (E60 E63 E64)
    Part #: 54-11272
    Price:   $716.95
    Sale Price: $536.95
    Savings $180.00


    Email a Friend
    People who like this product also like these products:
  • Power Pulley Kit for E60 M5 and E63/E64 M6 S85 V10
  • E63/E64 Black Front Center / Nose Grills - 645Ci, 650i & M6
  • E60 Black Center Grills - 525i, 528i, 530i, 535i, 545i, 550i, M5
    		•

    click to enlarge
    		 aFe Dynamic Air Scoops (DAS) for E82/E88 1 Series 128i & 135i
    Direct more fresh cool air from your BMW's center/nose grills to your intake, with the aFe D.A.S. (Dynamic Air Scoops). These two "scoops" install behind your front grills to direct more airflow into the factory intake snorkel used on the 2008, 2009 (and newer) E82 and E88 1 series BMWs, including 128i and 135i. Scoops are a direct bolt-in install, and include installation instructions and required hardware for a simple install. When combined with a higher flowing filter, such as the aFe stock replacement filter or twin filter system (135i only), these scoops help get the maximum benefit of a higher efficiency filter by providing more cool, fresh outside air directly into the intake snorkel. Both the 3.0 naturally aspirated and twin turbo models (especially the 135i turbo) need this added air flow for best horsepower and torque.

    These aFe Intake Scoops fit the following BMWs:
    2008+ E82 1 Series Coupe 128i & 135i coupe
    2008+ E88 1 Series Convertible 128i & 135i convertible
    Applications: 2008-- 128i 135i (E82 E88)
    Part #: 54-11648
    Price:   $179.95
    Sale Price: $139.95
    Savings $40.00
    Email a Friend
    People who like this product also like these products:
  • aFe Twin-Filter Intake Kit for E82/E88 135i, E90/E92 335i & 335xi, and E60 535i & 535xi
  • aFe SuperStock Intake for E90/E92 M3 (Filter, Intake Scoops & Restore Kit)
  • aFe Filter Restore Kit
    		•

    click to enlarge
    		 aFe Twin-Filter Intake Kit for E82/E88 135i, E90/E92 335i & 335xi, and E60 535i & 535xi
    Increase horse power and torque in your twin-turbo charged BMW 135i, 335i, 335xi, 535i or 535xi with this twin-filter element aFe cold air intake system. aFe has reported gains of 27hp and 34 ft/lbs of torque with this kit, which increases airflow 98% over the stock airbox. Installs in under an hour!

    The aFe Intake system is one of the easiest and most effective ways to increase your BMW's performance. The kit includes all parts and installation instructions to replace the restrictive factory air box with a low-restriction, high-flow filtering system. The kit includes a one-piece precision molded twin intake tube, 16 gauge powder coated steel heat shield, and gasket -- all assisting in blocking out hot engine air for cooler, denser air mass.

    This aFe Intake Kit fits the following BMWs:
    2007+ E90 3 Series Sedan - 335i & 335xi
    2007+ E92 3 Series Coupe - 335i & 335xi
    2008+ E82 1 Series Coupe - 135i
    2008+ E88 1 Series Convertible - 135i
    2007+ E60 5 Series - 535i & 535xi
    Applications: 2007-- 135i 335i 335xi 535i 535xi (E82 E88 E90 E92 E60)
    Part #: 54-11472
    Price:   $499.95
    Sale Price: $369.95
    Savings $130.00
    Email a Friend
    People who like this product also like these products:
  • aFe Dynamic Air Scoops (DAS) for E90/E92/E93 M3, 335i & 328i
  • aFe Filter Restore Kit
    		•

    click to enlarge
    		 aFe Intake Kit - E90/E92 325i & 330i
    aFe Magnum FORCE Stage 1 Cold Air Intake System for E90/E92 325i and 330i (sedan and coupe).

    This intake kit replaces your restrictive factory air box. It features a 3-angle velocity stack adapter, 16-gauge powder-coated steel heat shield, trim sealed to seal out hot engine air, and a custom aFe brand cotton filter.

    By removing your stock intake air box, you are removing the most restrictive portion of your engine's intake system, increasing both horse power and torque, improving acceleration as well as throttle response.

    6.5 hp gain (max) at 4900 rpm
    7 lb/ft torque (max) at 4900rpm


    Click here for installation instructions.
    Applications: 2006-2006 325i, 330i, Sedan and Coupe (E90 E91 E92)
    Part #: 54-11012
    Price:   $478.80
    Sale Price: $369.95
    Savings $108.85


    Email a Friend
    People who like this product also like these products:
  • aFe Filter Restore Kit
    		•

    click to enlarge
    		 aFe Dynamic Air Scoops (DAS) for E90/E92/E93 M3, 335i & 328i
    Direct more fresh cool air from your BMW's center/nose grills to your intake, with the aFe D.A.S. (Dynamic Air Scoops). These two "scoops" install behind your front grills to direct more airflow into the factory intake snorkel used on the 2007-2008 328i, 328xi, 335i & 335xi, and 2008+ E90/E92 M3. Scoops are a direct bolt-in install, and include installation instructions and required hardware for a simple install. When combined with a higher flowing filter, such as the aFe stock replacement filter or twin filter system (335i & 335xi), these scoops help get the maximum benefit of a higher efficiency filter by providing more cool, fresh outside air directly into the intake snorkel. Both the 3.0 twin turbo models and the 4.0 V8 models especially need this added air flow for best horsepower and torque.

    These aFe Intake Scoops fit the following BMWs:
    2007-2008 E90/E92/E93 328i & 328xi (coupe, sedan & convertible)
    2007-2008 E90/E92/E93 335i & 335xi (coupe, sedan & convertible)
    2008+ E90/E92/E93 M3 (coupe, sedan & convertible)
    Applications: 2007-- 328i 328xi 335i 335xi M3 (E90 E92 E93)
    Part #: 54-11478
    Price:   $179.95
    Sale Price: $139.95
    Savings $40.00
    Email a Friend
    People who like this product also like these products:
  • aFe Twin-Filter Intake Kit for E82/E88 135i, E90/E92 335i & 335xi, and E60 535i & 535xi
  • aFe SuperStock Intake for E90/E92 M3 (Filter, Intake Scoops & Restore Kit)
  • aFe Filter Restore Kit
    		•

    click to enlarge
    		 aFe SuperStock Intake for E90/E92 M3 (Filter, Intake Scoops & Restore Kit)
    Increase your V8 M3's intake flow by 54%, for a gain of 8 horsepower and 6 lb/ft of torque to the wheels, by upgrading your E90/E92/E93 M3's stock paper intake filter with an aFe High Performance airfilter and the Dynamic Air Scoops (D.A.S.) which install behind the front grills of your M3 to direct more cool air to the intake. The air scoops are a direct fit for the E9x M3, installs simply and easily using common tools (instruction included), and maintains the stock air box for a "stealth" install. Both the air scoops and the filter work in tandem; The high efficiency aFe air filter reduces restriction through the filter, while the Dynamic Air Scoops direct more of the fresh/cool air coming into the nose grills into the intake. More cool air, less restriction, and more precious power.

    This kit includes 1 stock-replacement air filter element, (2) dynamic air scoops (left and right), as well as filter restore kit for cleaning and reconditioning the re-useable filter element (a $12.49 value!).

    This aFe Super Stock Filter & Intake Scoop kit fits the following BMWs:
    2008+ E90 M3 sedan
    2008+ E92 M3 coupe
    2008+ E93 M3 convertible
    Applications: 2008-- M3 (E90 E92 E93)
    Part #: 55-11660
    Price:   $267.50
    Sale Price: $213.95
    Savings $53.55
    Email a Friend
    People who like this product also like these products:
  • aFe Filter Restore Kit
    		•

    click to enlarge
    		 aFe Intake Kit - MZ4 M Roadster & Coupe (2006+)
    aFe Intake Kit - MZ4 M Roadster & M Coupe, 2006-2009
    aFe Magnum FORCE Stage 1 Cold Air Intake System. This intake kit replaces your restrictive factory air box. It features a black composite/molded tube, 16-gauge powder-coated steel heat shield, trim sealed to seal out hot engine air, and a custom aFe brand cotton filter.

    This intake improves airflow by 90% for better acceleration and responsiveness. It does this by replacing your flat OE air filter with the largest high-flow, high-performance 360 degree radial flow filter that will fit within the space provided on the MZ4, as well as a custom designed intake tube that accelerates airflow to the throttle. The filter is also washable and reusable. aFe has reported gains of 11 hp and 10 lb/ft torque @ 4900rpm on the S54 powered MZ4 roadster/coupe. Installs in less than an hour using simple tools and factory mounting points (no cutting, drilling, or modifications required!). Instructions included. For even more benefit, we recommend upgrading your belt driven engine pulleys to our TMS Power Pulleys.

    This aFe intake kit fits all 2004+ MZ4 including:
    2006-2008 E85 MZ4 M Roadster
    2006-2008 E86 MZ4 M Coupe
    Applications: 2006-2008 MRoadster, MCoupe (MZ4)
    Part #: 54-11521
    Price:   $618.00
    Sale Price: $459.95
    Savings $158.05
    Email a Friend
    People who like this product also like these products:
  • MZ4 Power Pulley Upgrade Kit (Z4 M Roadster & Coupe)
  • aFe Filter Restore Kit
    		•

    click to enlarge
    		 aFe Intake Kit - X5 3.0 liter 2001-2005
    aFe Magnum FORCE Stage 1 Cold Air Intake System for X5 3.0i 2001-2006 (E85)

    This intake kit replaces the upper half of your factory air box. It features 16-gauge powder-coated steel heat shield, molded intake tub, trim sealed to seal out hot engine air, and a custom aFe brand cotton filter.

    By removing the stock intake internals, you are removing the most restrictive portion of your X5's intake system, increasing both horse power and torque, improving acceleration as well as throttle response.

    Click here for installation instructions.
    Applications: 2001-2005 X5 3.0i (X5 E53)
    Part #: 54-10691
    Price:   $276.76
    Sale Price: $214.95
    Savings $61.81


    Email a Friend
    People who like this product also like these products:
  • aFe Filter Restore Kit
    		•

    click to enlarge
    		 aFe Intake Kit - Z4 2.5i
    aFe Magnum FORCE Stage 1 Cold Air Intake System for Z4 2.5i.

    This intake kit replaces your restrictive factory air box. It features a 3-angle aluminum velocity stack adapter, 16-gauge powder-coated steel heat shield, trim sealed to seal out hot engine air, and a custom aFe brand cotton filter.

    By removing your stock intake air box, you are removing the most restrictive portion of your Z4's intake system, increasing both horse power and torque, improving acceleration as well as throttle response.

    Installed:


    Click here for installation instructions.
    Applications: 2003-2005 Z4 2.5i (Z4)
    Part #: 54-10651
    Price:   $399.76
    Sale Price: $349.95
    Savings $49.81


    Email a Friend
    People who like this product also like these products:
  • aFe Filter Restore Kit
    		•

    click to enlarge
    		 aFe Intake Kit - Z4 3.0i
    aFe Magnum FORCE Stage 1 Cold Air Intake System for Z4 3.0i.

    This intake kit replaces your restrictive factory air box. It features a 3-angle aluminum velocity stack adapter, 16-gauge powder-coated steel heat shield, trim sealed to seal out hot engine air, and a custom aFe brand cotton filter.

    By removing your stock intake air box, you are removing the most restrictive portion of your Z4's intake system, increasing both horse power and torque, improving acceleration as well as throttle response.

    11hp max gain, 14 lb/ft torque max gain


    Click here for installation instructions.
    Applications: 2003-2005 Z4 3.0i (Z4)
    Part #: 54-10661
    Price:   $399.76
    Sale Price: $309.95
    Savings $89.81


    Email a Friend
    People who like this product also like these products:
  • aFe Filter Restore Kit
    		•
    Intake Kits and Individual Intake Components

    click to enlarge
    		 TMS E46 M3 Carbon Fiber Cold Air Intake Kit
    Introducing the TMS Carbon Fiber Cold Air Intake for the E46 M3. After a lot of dyno time testing various intakes, we found this system to offer the best combination of horsepower, fit/finish and price. On a stock M3 this intake gained 8 rear wheel horsepower and 5 lb/pounds of torque (not a huge gain but equal or better than any other intake we tested). Best best gains, we highly recommend our performance software, which is available by Shark Injector (a convenient do-it-yourself engine computer reprogrammer).

    This system is in stock and ready to ship! It does not require any software modification and installs in less than 2 hours. There is only a minimal change in engine sound. Fit and finish is excellent and of course you have the ultra-strong and great looking, clear coated, 100% carbon fiber construction.


    Click here for Dyno Chart
    Applications: 2001-2006 M3 (E46)
    Part #: BMW46M3
    Price:   $999.95
    Sale Price: $749.95
    Savings $250.00


    Email a Friend
    People who like this product also like these products:
  • E46 M3 Shark Injector OBD-II Performance Programmer
    		•
    Clear Euro Parking Lights & Clear Euro Tail Lights

    click to enlarge
    		 E46 Sedan 1999-2001 Euro Clear Lens Package
    COMPLETE PACKAGE (SPECIAL PRICE). Full, 6-piece Euro clear turn signal set, including front turn signals, side markers, taillights and bulbs. These are a direct replacement for your stock yellow lenses and make a major change in the overall appearance of your car. There’s no question the Euro look is more pleasing to the eyes than the bright orange of the stock lights. We have packaged the whole car as a set of 6 lights with a package discount that saves you money. This is our lowest price ever! These lenses fit correctly, won’t dim or turn yellow, tight fit for no leaks, and the correct wiring for the US market (no OBC faults). Each of these lights installs in minutes with simple tools. Amber bulbs included or choose the Stealth option for a cleaner look.

    Applications:
    1999-2001 323i, 328i, 325i, 330i sedan
    Applications: 1999-2001 323i 328i 325i 330i (E46)
    Part #: CLE46SEDAN99-01
    Price:   $363.80
    Sale Price: $287.42
    Savings $76.38
    Email a Friend
    People who like this product also like these products:
  • PIAA Xtreme White Plus H7 High Or Low Beam Bulbs (Pair)
    		•

    click to enlarge
    		 E46 Wagon 2000-05 Euro Clear Lens Package
    COMPLETE PACKAGE (SPECIAL PRICE). Full, 6-piece Euro clear turn signal set, including front turn signals, side markers, taillights and bulbs. These are a replacement for your stock yellow lenses and make a major change in the overall appearance of your car. There’s no question the Euro look is more pleasing to the eyes than the bright orange of the stock lights. We have packaged the whole car as a set of 6 lights with a package discount that saves you money. This is our lowest price ever! These lenses fit correctly, won’t dim or turn yellow, tight fit for no leaks, and the correct wiring for the US market (no OBC faults). The rear taillights include wiring and connectors for a correct installation. Amber bulbs included or choose the Stealth option for a cleaner look.

    Applications:
    all 2000-2005 E46 323i, 323iT, 325i, 325iT, 325XiT, Touring Wagon
    Applications: 2000-2005 323iT, 325iT, 325XiT (E46)
    Part #: CLE46WAGON00-03
    Price:   $408.95
    Sale Price: $389.95
    Savings $19.00

     Options: Add Stealth bulbs?
    Options: Choose Your Year

    Email a Friend
    People who like this product also like these products:
  • PIAA Xtreme White Plus H7 High Or Low Beam Bulbs (Pair)
    		•
    PIAA Lighting Systems

    click to enlarge
    		 PIAA Xtreme White Plus H7 High Or Low Beam Bulbs (Pair)
    The very popular Xtreme White Plus technology is now available in H7 style bulbs. These are for both low and high beam. Rated at 4000K and providing 110watts worth of light from only 55watts these bulbs will provide a brilliant Xtreme cool white light that will light up road hazards and street signs long before a normal halogen bulb. DOT approved.
    • High quality heat resistant glass tube
    • Welded focus ring that assures proper positioning
    • Provides brighter light from less amps
    • A one piece filament support allows proper support and positioning
    • A metal bond holds the glass tube securely, preventing cracks and leaks
    Applications: '99+ 3 series, '97+ 5 series, '96-'02 7 series- 323, 325, 328, 330, 525, 528, 530, M5, 740, 750 (E46 E39 E38)
    Part #: 17655
    Price:   $94.95
    Sale Price: $74.95
    Savings $20.00
    Email a Friend

    click to enlarge
    		 PIAA Driving Lamp Kit for MINI Cooper and Cooper S
    This kit includes Two 540 Xtreme White driving lamps, two factory style mounting brackets (These are the updated brackets that prevent vibration!), two removable mesh style covers, wiring harness, relay, switch, and mounting hardware. Detailed instructions for the weekend "Do it yourselfer" are also included. This kit is a great alternative to the expensive factory lamps! Kit features an H3 55watt = 110watt XTRA Xtreme White driving bulb, Black stamped steel housing, glass lens. SAE compliant.

    Click on thumbs for 1080 x 740 dpi images.
    Applications: 2002-2005 Cooper, Cooper S (MINI)
    Part #: 5430
    Price:   $309.95
    Sale Price: $249.95
    Savings $60.00
    Email a Friend
    Headlight Assemblies

    click to enlarge
    		 E30 Hella Ellipsoid Headlight Kit (with smoked lenses)
    This complete kit replaces your standard US headlights with much brighter H1 equipped lenses. Lenses have city light. If your car does not have ellipsoid headlights already you will have to perform some minor re-wiring to install this kit.

    NOTE: BULBS are not included in this kit, choose from 55w or 100w below. Turner Motorsport also sells 2 different connectors that are required for instalation of this kit on US cars. This is not included in the box from HELLA - choose from parts below.
    Applications: 1987-1991 318i/325i/M3 (E30)
    Part #: 1DL005930-801
    Price:   $799.00
    Sale Price: $609.00
    Savings $190.00

     Options: Choose high beam connector (required for install)
    Options: This kit does not come with bulbs:

    Email a Friend
    People who like this product also like these products:
  • E30 Hella Ellipsoid Headlights (with clear lenses)
    		•
    Bentley Manuals

    click to enlarge
    		 BMW 5 Series (E39) Service Manual / Repair Manual - 1997-2003
    This two-volume repair manual contains 2132 pages, over 980 photos, and 1150 illustrations to aid in servicing maintaining your E39 5 series. This Bentley Manual is the only comprehensive, single source of service information and specifications available specifically for BMW 5 Series from 1997 to 2003. The aim throughout this manual has been simplicity, clarity and completeness, with practical explanations, step-by-step procedures and accurate specifications. Whether you are a professional or a do-it-yourself BMW owner, this manual will help you understand, care for and repair your E39 5 Series. Though the do-it-yourself BMW owner will find this manual indispensable as a source of detailed maintenance and repair information, the BMW owner who has no intention of working on his or her car will find that reading and owning this manual will make it possible to discuss repairs more intelligently with a professional technician.

    Models and engines covered:
    6-cylinder engines: M52, M52 TU, M54
    V-8 engines: M62, M62 TU

    Engine management systems covered (Motronic):
    Bosch M 5.2, M 5.2.1, ME 7.2
    Siemens MS 41.0, MS 42.0, MS 43.0

    Manual transmissions covered:
    Getrag S5D 250G, S6S 420G
    ZF S5D 320Z

    Automatic transmissions covered:
    A4S 270R, A4S 310R
    A5S 360R, A5S 390R
    A5S 325Z
    A5S 560Z, A5S 440Z
    Applications: 1997-2003 525i 528i 530i 540i Sedan & Wagon. (E39)
    Part #: B502
    Price:   $169.95
    Sale Price: $124.50
    Savings $45.45
    Email a Friend


    click to enlarge
    		 E46 3 Series Bentley Service Manual
    This Bentley Manual is a comprehensive source of service information and specifications for BMW 3 Series from 1999 to 2005. The aim throughout this manual has been simplicity, clarity and completeness, with practical explanations, step-by-step procedures and accurate specifications. Whether you're a professional or a do-it-yourself BMW owner, this manual will help you understand, care for and repair your E46 3 Series.

    Maintenance and service, including checking and adjusting valve clearance on the S54 M3 engine 116 Cylinder Head and Valvetrain

    Though the do-it-yourself BMW owner will find this manual indispensable as a source of detailed maintenance and repair information, the BMW owner who has no intention of working on his or her car will find that reading and owning this manual will make it possible to discuss repairs more intelligently with a professional technician.

    BMW E46 models and engines covered in this BMW repair manual:
    323i, 323Ci (M52 TU, 2.5 liter engine)
    328i, 328Ci (M52 TU, 2.8 liter engine)
    325i, 325Ci, 325xi (M54 / M56, 2.5 liter engine)
    330i, 330Ci, 330xi (M54, 3.0 liter engine)
    M3 Coupe & Convertible (S54, 3.2 liter Motorsport engine)
    Applications: 1999-2005 323, 325, 328, M3 (E46)
    Part #: B301/B305
    Price:   $139.95
    Sale Price: $94.95
    Savings $45.00
    Email a Friend
    Reset Tools

    click to enlarge
    		 Peake Research R5 FCX-III Fault Code Reader (most BMWs up to 2006)
    BMW owners should have a great interest in the R5 FCX-III tool. The BMW's Check-Engine light can mean any number of things. Sometimes it's alerting you to the real need for a repair, but very often it is merely indicating one of the many, simple (top off your coolant) type problems. Tool resets the Check Engine, Service and Oil Change indicator dashboard lights. Easy to use and includes a booklet containing the fault code chart and instructions for use.

    Will not work on the following vehicles: E30 M3, E30 325e, 2000 750iL. This unit plugs into the round port under the hood on cars up to 2000. You can use this on 2001 and later cars with the AB03 Adapter. See below.
    Applications: 1987-2006 all (all)
    Part #: FCX
    Price:   $148.95
    Sale Price: $139.95
    Savings $9.00

     Options: Add any adapters?

    Email a Friend
    People who like this product also like these products:
  • Peake Research Late to Early Reset Tool Adapter
  • Peake Research AB03 Adaptor
    		•
    Bilstein PSS, PSS9 & PSS10 Coil-Over Suspensions

    click to enlarge
    		 E36 318i/325i/328i Bilstein PSS Coil Over Suspension
    adj. -1.0"-1.75" / adj. -1.0"-1.75"

    (Previously sold as Bilstein PSS kit part# HE5-8033)

    Applications: 1993-1998 318i/323i/325i/328i (E36)
    Part #: HE5-C481-H1
    Price:   $1,458.00
    Sale Price: $1,049.00
    Savings $409.00
    Email a Friend
    People who like this product also like these products:
  • Strut/Shock Mount Kit for All E36 (M3, 318i/is, 325i/is, 323is & 328i/is)
  • Bilstein Coil Over Spanner Wrench Set
    		•

    click to enlarge
    		 E90/E92/E82/E88 Bilstein PSS9 Adjustable Coil Over Kit (1 and 3 Series)
    This kit has been replaced with the PSS10.
    Applications: 2006-2008 325i 328i 330i 335i 128i 135i (E90 E92 E82 E88)
    Part #: GM5-C051-H1
    Price:   $0.00
    Sale Price: $0.00
    Savings $0.00
    Email a Friend
    People who like this product also like these products:
  • Bilstein Coil Over Spanner Wrench Set
  • E90/E92/E82/E88 Bilstein PSS10 Adjustable Coil Over Kit (1 and 3 Series)
    		•
    H&R Coil Over Suspensions

    click to enlarge
    		 E36 318i H&R Coil Over Suspension
    Front: adj. -1.0"-2.5" / Rear: adj. -1.0"-2.0". If your E36 is used as a daily-driver and a track machine this is a great suspension to use. Blueprinted as coil overs (not just a modified shock body), the H&R units are hand made in Germany by H&R Spezialfedern, under ISO 8001 Quality Assurance Standards. Progressive-rate springs are not harsh on the street yet still provide better handling and better looks. Special H&R Coil-Over Wrenches are included in this price.
    Applications: 1992-1996 318i/is (E36)
    Part #: 29925-1
    Price:   $1,380.00
    Sale Price: $1,117.80
    Savings $262.20
    Email a Friend
    People who like this product also like these products:
  • Strut/Shock Mount Kit for All E36 (M3, 318i/is, 325i/is, 323is & 328i/is)
    		•

    click to enlarge
    		 E90 Xi Sedan H&R Adjustable Coil-Over Suspension Kit
    F: -1.25-2.5 / R: -.75-2.0; Hands-down the best suspension for the Xi extant. Blueprinted as coil overs (not just a modified shock body), the H&R units are hand made in Germany by H&R Spezialfedern, under ISO 8001 Quality Assurance Standards. Every Xi should have this suspension. Progressive-rate springs and matching height-adjustable struts/shocks improve on the car's handling without hurting ride quality. Lowered stance is a big improvment over the standard 4wd setup. Special H&R Coil-Over Wrenches are included in this price.
    Applications: 2005-2006 325xi 328xi 330xi (E90)
    Part #: 50495
    Price:   $1,580.00
    Sale Price: $1,279.80
    Savings $300.20
    Email a Friend
    Turner Motorsport TrackSport Coil-Overs

    click to enlarge
    		 Turner E46 M3 TrackSport Coil-Over Suspension Kit
    NEW! Our own custom Coil-Over suspension kit for the E46 M3 has been designed specifically for the driving enthusiast who wants razor-sharp, precise handling while still being tolerable for the street. This is our firmest street coil-over kit, making it a great choice for weekend track and club sport events. We spec'd this package in a spring rate suitable for mixed street and track driving, making for tolerable street driving while still being aggressive enough to be a great choice for weekend track and club sport events. Perfect for driving schools and high performance driver educations (HPDE). Designed and engineered by Turner Motorsport and H&R, these kits are Autobahn & Nurburgring tested and surpass all German TUV standards for quality and function. Such a combination of handling performance and quality simply cannot be matched at this special low introductory price.

    The kit consists of front and rear H&R fixed-valving dampeners matched to Turner customized H&R coil springs, and feature fully-threaded front shock bodies (not an imitation sleeve-over) and adjustable rear spring perches that allow you to precisely dial in front and rear ride height (kit tends to lower the car 1-2" front and .75-1.6" rear). Each shock is engineered to work in harmony with its matched progressive-rate spring (about 400 lbs front and 650 lbs rear), together creating a finely tuned suspension system.

    Kit fits all E46 M3, as produced in 2001, 2002, 2003, 2004, 2005 & 2006. Pictured with our (optional) Turner Street Camber plates, these are not included in the basic coil-over kit, but can certainly be added to dial front camber/caster settings.

    Turner TrackSport Plus BundleWant more handling and even more savings? We are also offering this kit in a special limited time "bundle", the TrackSport "Plus" package, which adds a set of Turner front & rear swaybars ($399), Turner front adjustable swaybar links ($156), adjustable rear swaybar links ($65), and a pair of JTD aluminum rear shock mounts ($99) -- a combined value of $720.79 -- for only $500 more. That's an additional $220.79 in savings!
    Applications: 2001-2006 M3 (E46)
    Part #: TMS-TS-E46-M3-COIL-OVER-KIT
    Price:   $1,699.95
    Sale Price: $1,199.95
    Savings $500.00

     Options: Add TMS Street Camber Plates?
    Options: Upgrade to TrackSport PLUS?

    Email a Friend

    click to enlarge
    		 Turner E46 M3 TrackSport PLUS Suspension Kit (Bonus Bundle!)
    Special bundle offer! This kit adds Turner swaybars, Turner front adjustable sway bar links, adjustable rear swaybar links, and JTD aluminum rear shock mounts to our TrackSport Coil-over suspension kit, for just $500 more. That's an additional $220.79 off the bundled items, combined for a $720.79 in savings (WOW!!). Kit fits all 2001-2006 E46 M3.

    Our own custom Coil-Over suspension kit for the E46 M3 has been designed specifically for the committed motorsport enthusiast who is willing to relinquish ride comfort on the street in return for razor-sharp handling performance. This is our firmest streetable coil-over kit, making it the choice for weekend track and club sport events. Designed and engineered by Turner Motorsport and H&R, these kits are Nurburgring tested and Autobahn / TUV approved. Such a combination of handling performance and quality simply cannot be matched at this special low introductory price.

    This kit consists of the following
    • Turner TrackSport Coil-over suspension - (front and rear H&R/Bilstein fixed-valving dampeners matched to Turner customized H&R coil springs, and feature fully-threaded front shock bodies (not an imitation sleeve-over) and adjustable rear spring perches that allow you to precisely dial in front and rear ride height. (kit tends to lower the car 1-2" front and .75-1.6" rear). Each shock is engineered to work in harmony with its matched progressive-rate spring (about 400 lbs front and 650 lbs rear), together creating a finely tuned suspension system.
    • Turner E46 M3 Sway Bar Set - 30mm 3-way adjustable front bar and 25mm 2-way adjustable rear bar, including sway bar bushings.
    • Turner Adjustable Front Swaybar Links (pair) - Quiet operation and long life as the stock links, plus the strength and adjustability of rod-end style links. These allow you to neutralize preload on swaybars to balance the car.
    • TMS Adjustable Rear Swaybar Links (pair)
    • JTD Aluminum Rear Shock Tower Mounts (pair)

    Kit fits all E46 M3, as produced in 2001, 2002, 2003, 2004, 2005 & 2006. Pictured with our (optional) Turner Camber plates, these are not included in the basic coil-over kit, but can be added to dial front camber/caster settings, available in street or race versions.
    Applications: 2001-2006 M3 (E46)
    Part #: TMS-TSP-E46-M3-COIL-OVER-KIT
    Price:   $2,419.79
    Sale Price: $1,699.95
    Savings $719.84

     Options: Add TMS Front Street Camber Plates?
    Options: Add TMS Rear Camber Arms?

    Email a Friend
    People who like this product also like these products:
  • TMS Camber Plate for E46 M3 (Street)
  • TMS E36/E46/Z4 Adjustable Rear Camber Arms (Pair)
    		•
    Other TMS Gear

    click to enlarge
    		 Carbon Fiber Bi-Fold Wallet
    If you simply can not get enough carbon fiber in your life, then this will be a must have. This simple mens bi-fold wallet features real carbon fiber and stiched soft black leather. It's meant to be thin, light weight and the carbon fiber is coated and flexible so that it is confortable in your pocket.

    This carbon fiber wallet features the following:
  • Nine credit card slots
  • Two hidden slots underneath the nine slots
  • Flip-out inside flap with clear window for your ID
  • Divider inside the currency portion, for cash, receipts, checks, etc
  • Wallet measures 3.75" x 4.5" (9.5cm x 11.5 cm)

    •
    Applications: --- All (All)
    Part #: CARBON-FIBER-WALLET
    Price:   $60.00
    Sale Price: $40.00
    Savings $20.00
    Email a Friend
    Piloti DTM Driving Shoes

    click to enlarge
    		 Piloti DTM Driving Shoe - Black / Silver / Smoke
    The DTM is the mid-cut style from Piloti's Race Performance line of shoes. As in all their Race Performance shoes, it has the patented Roll Control™ heel, fire resistant DuPont NOMEX® lining, and it’s reinforced on the lateral side of the right shoe for essential heel-&-toe downshifting feel needed for smooth braking and acceleration in the turns.

    No Restocking fee for size exchange or returns!  Free ground shipping on exchanges!  If you feel your shoes are too big or too small, send them back for an exchange for another size, no questions asked!  We will even cover ground shipping on the new set (lower 48 states, USA only.)
    Applications: --- - (-)
    Part #: DTMBLK/SLV
    Price:   $110.00
    Options: Choose Your Size

    Email a Friend

    click to enlarge
    		 Piloti DTM Driving Shoe - Race Blue / Race Yellow / Black
    OFFICIAL TURNER MOTORSPORT TEAM APPAREL. The DTM is the mid-cut style from Piloti's Race Performance line of shoes. As in all their Race Performance shoes, it has the patented Roll Control™ heel, fire resistant DuPont NOMEX® lining, and it’s reinforced on the lateral side of the right shoe for essential heel-&-toe downshifting feel needed for smooth braking and acceleration in the turns.

    No Restocking fee for size exchange or returns!  Free ground shipping on exchanges! If you feel your shoes are too big or too small, send them back for an exchange for another size, no questions asked!  We will even cover ground shipping on the new set (lower 48 states, USA only.)
    Applications: --- - (-)
    Part #: dtmblu/yel
    Price:   $110.00
    Options: Choose Your Size

    Email a Friend
    Piloti Spyder SV Driving Shoes

    click to enlarge
    		 Piloti Spyder SV Driving Shoe - Black / Ecosse / Race Yellow
    OFFICIAL TURNER MOTORSPORT TEAM APPAREL. The low-cut Spyder SV is a favorite from the Piloti Touring line. Like our Race Performance shoes, the Spyder SV has our patented Roll Control™ heel and is reinforced on the lateral side of the right shoe for proper heel-&-toe downshifting. The Touring line was created to give enthusiasts an alternative to our line of fire-resistant shoes while retaining all the fit and performance of all Piloti shoes. Instructors at the Bob Bondurant School of High Performance Driving use the Spyder SV as their daily footwear. We’ve added one more innovation: a unique toggle lacing system. This provides secure comfort and extreme ease-of-use. The Spyder SV is constructed of suede-and-mesh or leather-and-mesh.

    No Restocking fee for size exchange or returns!  Free ground shipping on exchanges!  If you feel your shoes are too big or too small, send them back for an exchange for another size, no questions asked! We will even cover ground shipping on the new set (lower 48 states, USA only.)
    Applications: --- - (-)
    Part #: SPYBLK/BLU
    Price:   $75.00
    Options: Choose Your Size

    Email a Friend

    click to enlarge
    		 Piloti Spyder SV Driving Shoe - Smoke / Black / Race Yellow
    The low-cut Spyder SV is a favorite from the Piloti Touring line. Like our Race Performance shoes, the Spyder SV has our patented Roll Control™ heel and is reinforced on the lateral side of the right shoe for proper heel-&-toe downshifting. The Touring line was created to give enthusiasts an alternative to our line of fire-resistant shoes while retaining all the fit and performance of all Piloti shoes. Instructors at the Bob Bondurant School of High Performance Driving use the Spyder SV as their daily footwear. We’ve added one more innovation: a unique toggle lacing system. This provides secure comfort and extreme ease-of-use. The Spyder SV is constructed of suede-and-mesh or leather-and-mesh.

    No Restocking fee for size exchange or returns!  Free ground shipping on exchanges!  If you feel your shoes are too big or too small, send them back for an exchange for another size, no questions asked!  We will even cover ground shipping on the new set (lower 48 states, USA only.)
    Applications: --- - (-)
    Part #: SPYGREY/BLK
    Price:   $75.00
    Options: Choose Your Size

    Email a Friend
    Piloti G16 Driving Shoes

    click to enlarge
    		 Piloti G16 Driving Shoe - Olive / Black / Gum
    The low-cut G16 is named after one of the best driving roads in California. Like Piloti Race Performance shoes, the G16 has the patented Roll Control™ heel and is reinforced on the lateral side of the right shoe for proper heel-&-toe downshifting. Piloti created G16’s with a combination of high-quality suede and mesh to give you all the fit and performance of Piloti’s innovative design whether you’re at an autocross, on the track or just cruising the streets.

    No Restocking fee for size exchange or returns!  Free ground shipping on exchanges!  If you feel your shoes are too big or too small, send them back for an exchange for another size, no questions asked!  We will even cover ground shipping on the new set (lower 48 states, USA only.)
    Applications: --- - (-)
    Part #: G16OLIVE/BLK
    Price:   $80.00
    Options: Choose Your Size

    Email a Friend

    		 

    Copyright © 2009 Turner Motorsport Inc.
    info@turnermotorsport.com
    		 www.allshocks.com
    www.allsprings.com    		 Terms and Conditions
    Privacy Policy