BMW Motor Mounts for BMW 3 Series E30 (1984-1991)

Motor Mount - E30 318is (M42)

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:14693

Part#: 11811137076

Ships in 4 Business Days

6% off MSRP $ 204.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 191.99 USD

Add to Wish List

Qty

6% off MSRP

$ 204.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 191.99 USD

Add to Wish List

This is a Genuine BMW rubber motor mount for E30 318i/is/ic with the M42 4 cylinder engine. There are 2 per car, and they are sold individually. We recommend replacing both at the same time, so be sure to add 2 to your cart!

When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

This item fits the following BMWs:
1990-1991 E30 BMW 318i 318is 318ic

Show More Show Less

Engine Mount - Priced Each

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:594933

Part#: 11811132323

In Stock

$ 43.56

This product was last offered at the strikethrough price on
06-01-2026

$ 25.99 USD

Add to Wish List

Qty

$ 25.99 USD

Add to Wish List

Excessive driveline vibration is caused by one of a few things, but more than likely, it is the mounts in your vehicle. They keep your engine and transmission secure for more positive shifting and driveline triangulation as well as absorbing vibration. If any of these are occuring in your BMW, it's time to examine your mounts.

Show More Show Less

E30 325e/325i Motor Mount

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:7085

Part#: 11811132323

Back Ordered

Sale - Save 5% $ 26.99

This product was last offered at the strikethrough price on
06-28-2026

$ 25.64 USD

Add to Wish List

Qty

Sale - Save 5%

$ 26.99

This product was last offered at the strikethrough price on
06-28-2026

$ 25.64 USD

Add to Wish List

These are the stock rubber motor mounts for the E30 M20 engine - 325e and 325i. These are the original spec full rubber mounts. The M20 has a fatal flaw especially when the motor mounts are worn. The engine can shift and contact other things in the engine compartment, mostly cooling-related parts. This is especially troublesome on the 1984-1987 models as the alternator belt and blades can cut into the lower radiator hose. Don't neglect your motor mounts! A worn motor mount allows the engine to twist and shift around. The harder you're driving the more shift will occur. Twisting of the engine can also lead to shifting problems as the transmission twists with it. There are countless issues related to worn or compressed motor mounts so don't overlook these as a regular replacement item (every 50,000 miles).

For more serious track or street cars we recommend our HD motor mount kit with reinforcing cups - click here. These are a stiffer mount to begin with (coming from the Euro 635CSi) and the aluminum cups give additional strength especially for the side-side shearing loads that you get from cornering.

These stock rubber motor mounts are sold per mount .

This item fits the following BMWs:
1984-1991 E30 BMW 325e 325es 325i 325ic 325is

Show More Show Less

Revshift Solid Bolt-Through Motor Mounts - BMW E30 M20

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:1105936

Part#: SMM-E30

In Stock

$ 44.99 USD

Add to Wish List

Qty

$ 44.99 USD

Add to Wish List

Solid bolt through 70D polyurethane motor mounts. Recommended for race use only. These mounts are designed for a 1983-1991 E30 BMW 3-series with an M20 engine. Revshift motor mounts are made by Revshift in the U.S.A. from high-quality polyurethane. 70D polyurethane has a comparable hardness to plastics such as Delrin and UHMW. Unlike plastic, polyurethane is an elastomer which means it will return to its original shape if deformed and it will not crack. We do not recommend plastics for automotive use due to their inherent brittleness and inability to return to their original shape when deformed. Revshift Performance Engineering is a high-performance parts manufacturer with a focus on quality, reliability, and performance. Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.

Show More Show Less

Revshift Polyurethane Engine Mounts - 95A - E30 M20

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:1105935

Part#: PMM-E30-95A

Ships in 7 Business Days

$ 89.99 USD

Add to Wish List

Qty

$ 89.99 USD

Add to Wish List

These mounts are designed for a 1983-1991 E30 BMW 3-series with an M20 engine. Revshift polyurethane motor mounts are made in the U.S.A. from high-grade polyurethane. Revshift mounts are the most durable and reliable mounts on the market. CNC machined billet aluminum flanged ends are embedded deep in the urethane which prevent the isolated ends from separating under extreme loads. Utilizing class 14.9 alloy steel removable screws these mounts will hold your engine in place for a lifetime. To further ensure the strength of these mounts we form the threads with a forming tap which creates denser and stronger threads in the billet aluminum end pieces. These mounts have removable screws for ease of installation. We recommend using loctite on the threads during installation. Revshift Performance Engineering is a high-performance parts manufacturer with a focus on quality, reliability, and performance. Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.

Show More Show Less

Condor Speed Shop Solid UHMW M20 Motor Mount Set & Transmission Mount...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:577859

Part#: M20M_TRANS

Ships in 4 Business Days

$ 79.00 USD

Add to Wish List

Qty

$ 79.00 USD

Add to Wish List

Under hard braking the stock mounts allow the m20 to pitch forward and to the side. These solid UHMW replacement mounts stiffen the engine and drivetrain, dramatically changing the responsiveness of your BMW E30. These solid UHMW motor mounts are a direct replacement for your original 1984-1991 E30 BMW 323, 325e 325es 325i 325ic 325is' OEM rubber motor mounts. UHMW is an excellent general-purpose plastic with a unique combination of wear and corrosion resistance, low friction surface and impact strength. It is resistant to chemical attack and moisture absorption and retains key physical properties to -30 C. Includes solid transmission mounts as well!

Show More Show Less

Condor Speed Shop M20+20 Engine Riser Motor Mount & Solid Transmissio...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:577564

Part#: S14M+T

Ships in 5 Business Days

$ 80.00 USD

Add to Wish List

Qty

$ 80.00 USD

Add to Wish List

These specific mounts are designed for those with clearance issues on extremely low E30s. They are 20mm taller than OEM mounts to add necessary clearance to ensure the oil pan sits above the stock subframe. Under hard braking the OEM rubber mounts allow the m20 to lean forward. Not only do these solid UHMW replacement mounts stiffen the engine and drivetrain, but they also raise the engine by 20mm, dramatically changing the responsiveness and raising the oil pan height of your E30. UHMW is an excellent general-purpose plastic with a unique combination of wear and corrosion resistance, low friction surface and impact strength. It is resistant to chemical attack and moisture absorption and retains key physical properties to -30 C. This kit includes Solid Transmission Mounts as well for fully solid powertrain mounting!

Show More Show Less

Genuine BMW Engine Mount - E30 M3

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:367772

Part#: 11812225598

Ships in 7 Business Days

6% off MSRP $ 173.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 162.99 USD

Add to Wish List

Qty

6% off MSRP

$ 173.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 162.99 USD

Add to Wish List

Ensure a stable and smooth ride in your BMW by addressing engine mount issues with this replacement kit. When engine mounts fail, the engine becomes unstable in the chassis, leading to excessive vibrations. This kit provides a solution by offering the following benefits:

Stabilizes the engine in the chassis for a smoother ride.
Reduces excessive driveline vibration caused by worn-out mounts.
Enhances positive shifting and driveline triangulation.
Absorbs vibrations for a more comfortable driving experience.
Ideal for BMW owners experiencing engine mount-related issues.
Easy replacement to restore stability and performance.

Show More Show Less

Revshift Polyurethane Engine Mounts - 95A - E30 24V Swap

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:1105934

Part#: PMM-24V-95A

Ships in 8 Business Days

$ 149.99 USD

Add to Wish List

Qty

$ 149.99 USD

Add to Wish List

These mounts are designed for a 1983-1991 E30 BMW 3-series with a 24 valve M50/M52/S50/S52/S54 engine swap with an E21, 2002tii, or VW MK2 Golf brake booster. They use the OEM motor mount bolt holes on the E30 subframe. The mounts are angled with offset bolts to position the engine so that proper drivetrain alignment is maintained. They are used with E36 engine brackets. Revshift motor mounts are made by Revshift in the U.S.A. from high-quality polyurethane. Revshift mounts are the most durable and reliable mounts on the market. CNC machined billet aluminum flanged ends are embedded deep in the urethane which prevents the isolated ends from separating under extreme loads. Utilizing class 14.9 alloy steel removable screws these mounts will hold your engine in place for a lifetime. To further ensure the strength of these mounts we form the threads with a forming tap which creates denser and stronger threads in the billet aluminum end pieces. These mounts have removable screws for ease of installation. We recommend using Loctite on the threads during installation. Revshift Performance Engineering is a high-performance parts manufacturer with a focus on quality, reliability, and performance. Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.

Show More Show Less

Condor Speed Shop M20+20 Engine Riser Motor Mount Set - E30

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:577565

Part#: S14M

Ships in 2 Business Days

$ 55.00 USD

Add to Wish List

Qty

$ 55.00 USD

Add to Wish List

These specific mounts are designed for those with clearance issues on extremely low E30s. They are 20mm taller than OEM mounts to add necessary clearance to ensure the oil pan sits above the stock subframe. Under hard braking the OEM rubber mounts allow the m20 to lean forward. Not only do these solid UHMW replacement mounts stiffen the engine and drivetrain, but they also raise the engine by 20mm, dramatically changing the responsiveness and raising the oil pan height of your E30. UHMW is an excellent general-purpose plastic with a unique combination of wear and corrosion resistance, low friction surface and impact strength. It is resistant to chemical attack and moisture absorption and retains key physical properties to -30 C.

Show More Show Less

Condor Speed Shop Solid Motor & Transmission Mount Set - E30 w/ M10 ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:577966

Part#: E30_M10M_TRANS

In Stock at Vendor

$ 115.00 USD

Add to Wish List

Qty

$ 115.00 USD

Add to Wish List

These solid UHMW motor mounts are made specifically for M10 powered e30s. Under hard braking the stock mounts allow the M10 to lean forward. These solid UHMW replacement mounts stiffen the engine and drivetrain, dramatically changing the responsiveness of your 318. These solid UHMW motor mounts are a direct replacement for OEM rubber motor mounts. UHMW is an excellent general-purpose plastic with a unique combination of wear and corrosion resistance, low friction surface and impact strength. It is resistant to chemical attack and moisture absorption and retains key physical properties to -30 C. Includes solid transmission mounts as well.

Show More Show Less

Revshift Solid Bolt-Through Motor Mounts & Trans Mount Kit - BMW E30 ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:1105937

Part#: SMK-E30

Special Order: No Guaranteed ETA

$ 64.99 USD

Add to Wish List

Qty

$ 64.99 USD

Add to Wish List

Solid bolt through 70D polyurethane motor and trans mounts. Recommended for race use only. These mounts are designed for a 1983-1991 E30 BMW 3-series with an M20 engine. Revshift motor mounts are made by Revshift in the U.S.A. from high-quality polyurethane. 70D polyurethane has a comparable hardness to plastics such as Delrin and UHMW. Unlike plastic, polyurethane is an elastomer which means it will return to its original shape if deformed and it will not crack. We do not recommend plastics for automotive use due to their inherent brittleness and inability to return to their original shape when deformed. Revshift Performance Engineering is a high-performance parts manufacturer with a focus on quality, reliability, and performance. Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.

Show More Show Less

Condor Speed Shop Solid Engine & Transmission Mount Set - E30 318i/is...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:577964

Part#: E30_M42M_TRANS

Ships in 3 Business Days

$ 125.00 USD

Add to Wish List

Qty

$ 125.00 USD

Add to Wish List

These solid UHMW motor mounts are made specifically for M42 powered e30s. Under hard braking the stock mounts allow the M42 to lean forward. These solid UHMW replacement mounts stiffen the engine and drivetrain, dramatically changing the responsiveness of your 318. These solid UHMW motor mounts are a direct replacement for OEM rubber motor mounts. UHMW is an excellent general-purpose plastic with a unique combination of wear and corrosion resistance, low friction surface and impact strength. It is resistant to chemical attack and moisture absorption and retains key physical properties to -30 C. Fitment: 1990-1991 E30 BMW 318i, 318is, 318ic

Show More Show Less

Genuine BMW Engine Mount Cover Plate - Right - E30

For coupe and sedan models only

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:69331

Part#: 41111966554

Ships in 10 Business Days

3% off MSRP $ 479.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 463.99 USD

Add to Wish List

Qty

3% off MSRP

$ 479.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 463.99 USD

Add to Wish List

Genuine BMW Covering Plate Right -
This item fits the following BMW Chassis:
E30

Genuine BMW Washer A10,5X22 - 31111114348 - E30,E34,E36,E30 M3,E36 M3...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:7690

Part#: 31111114348

In Stock

$ 5.09 USD

Add to Wish List

Qty

$ 5.09 USD

Add to Wish List

Enhance the performance and reliability of your BMW with the Genuine BMW Washer A10,5X22, part number 31111114348, compatible with E30, E34, E36, E30 M3, and E36 M3 models. Crafted to BMW's exact standards, this washer ensures optimal fitment and durability. From routine maintenance to repairs, trust Genuine BMW quality to keep your BMW running smoothly. Invest in Genuine BMW parts for peace of mind and confidence on the road.

Genuine BMW quality assurance
Compatible with various BMW models
Ensures optimal fitment and durability
Essential for routine maintenance and repairs
Guaranteed performance and reliability

Genuine BMW Washer - A10,5X22
This item fits the following BMW Chassis:
E30 M3,E36 M3,E30,E34,E36

Show More Show Less

Engine Mount - Priced Each

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:584530

Part#: 11811132323

In Stock

$ 11.99 USD

Add to Wish List

Qty

$ 11.99 USD

Add to Wish List

Revshift Polyurethane Motor Mounts - 95A - BMW E30 M10

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:1105949

Part#: PMM-M10-95A

Ships in 8 Business Days

$ 99.99 USD

Add to Wish List

Qty

$ 99.99 USD

Add to Wish List

These mounts are designed for a 1983-1991 E30 BMW 3-series with an M10 engine. Revshift motor mounts are made by Revshift in the U.S.A. from high-quality polyurethane. Revshift mounts are the most durable and reliable mounts on the market. High tensile strength flanged studs are embedded deep in the urethane which prevents the isolated ends from separating under extreme loads. Utilizing class 12.9 alloy steel fasteners these mounts will hold your engine in place for a lifetime. The class 12.9 fasteners are approximately 75 percent stronger than the fasteners used on stock automotive mounts. Revshift Performance Engineering is a high-performance parts manufacturer with a focus on quality, reliability, and performance. Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.

Show More Show Less

Condor Speed Shop Solid Motor Mount Set - E30 w/ M10

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:577965

Part#: E30_M10M

Ships in 3 Business Days

$ 90.00 USD

Add to Wish List

Qty

$ 90.00 USD

Add to Wish List

These solid UHMW motor mounts are made specifically for M10 powered e30s. Under hard braking the stock mounts allow the M10 to lean forward. These solid UHMW replacement mounts stiffen the engine and drivetrain, dramatically changing the responsiveness of your 318. These solid UHMW motor mounts are a direct replacement for OEM rubber motor mounts. UHMW is an excellent general-purpose plastic with a unique combination of wear and corrosion resistance, low friction surface and impact strength. It is resistant to chemical attack and moisture absorption and retains key physical properties to -30 C.

Show More Show Less

Revshift Polyurethane Motor Mounts - 95A - BMW E30 M42

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:1105941

Part#: PMM-M42-95A

Ships in 8 Business Days

$ 149.99 USD

Add to Wish List

Qty

$ 149.99 USD

Add to Wish List

These mounts are designed for an E30 with a M42 engine and an E34 with a M50 or M20 engine. Revshift polyurethane motor mounts are made in the U.S.A. from high-grade polyurethane. Revshift mounts are the most durable and reliable mounts on the market. CNC machined billet aluminum flanged ends are embedded deep in the urethane which prevents the isolated ends from separating under extreme loads. Utilizing class 14.9 alloy steel removable screws these mounts will hold your engine in place for a lifetime. To further ensure the strength of these mounts we form the threads with a forming tap which creates denser and stronger threads in the billet aluminum end pieces. These mounts have removable screws for ease of installation. We recommend using Loctite on the threads during installation. Revshift Performance Engineering is a high-performance parts manufacturer with a focus on quality, reliability, and performance. Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.

Show More Show Less

Black Forest Industries Engine Mounts - Stage 1 - BMW E30 / E36 / E46...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:50934264

Part#: BFI-BMW-90-01

Ships on Jul 22, 2026

$ 199.99 USD

Add to Wish List

Qty

$ 199.99 USD

Add to Wish List

Eliminate the "drive-line slop" common in the E36 and E46 chassis with this Stage 1 Engine Mount kit.

BFI Transmission Mounts - Stage 1 - BMW E30 / E36 / E46 / E9X / Z3 / ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:50934269

Part#: BFI-BMW-TRANS-01

Ships on Jul 22, 2026

$ 69.99 USD

Add to Wish List

Qty

$ 69.99 USD

Add to Wish List

This kit is a "must-have" for any E36, E46, or E9X owner looking to tighten up their drivetrain's foundation and ensure long-term mechanical reliability.

Genuine BMW Motor And Transmission Mount Kit - E30 325e 325es 325i 32...

For vehicles with manual transmission only

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:376046

Part#: 11811132323KT

Back Ordered

$ 327.99 USD

Add to Wish List

Qty

$ 327.99 USD

Add to Wish List

Project Cars

SELECT YOUR BMW

BMW Motor Mounts for BMW 3 Series E30 (1984-1991)

Motor Mount - E30 318is (M42)

Engine Mount - Priced Each

E30 325e/325i Motor Mount

Revshift Solid Bolt-Through Motor Mounts - BMW E30 M20

Revshift Polyurethane Engine Mounts - 95A - E30 M20

Condor Speed Shop Solid UHMW M20 Motor Mount Set & Transmission Mount...

Condor Speed Shop M20+20 Engine Riser Motor Mount & Solid Transmissio...

Genuine BMW Engine Mount - E30 M3

Revshift Polyurethane Engine Mounts - 95A - E30 24V Swap

Condor Speed Shop M20+20 Engine Riser Motor Mount Set - E30

Condor Speed Shop Solid Motor & Transmission Mount Set - E30 w/ M10 ...

Revshift Solid Bolt-Through Motor Mounts & Trans Mount Kit - BMW E30 ...

Condor Speed Shop Solid Engine & Transmission Mount Set - E30 318i/is...

Genuine BMW Engine Mount Cover Plate - Right - E30

Genuine BMW Washer A10,5X22 - 31111114348 - E30,E34,E36,E30 M3,E36 M3...

Engine Mount - Priced Each

Revshift Polyurethane Motor Mounts - 95A - BMW E30 M10

Condor Speed Shop Solid Motor Mount Set - E30 w/ M10

Revshift Polyurethane Motor Mounts - 95A - BMW E30 M42

Black Forest Industries Engine Mounts - Stage 1 - BMW E30 / E36 / E46...

BFI Transmission Mounts - Stage 1 - BMW E30 / E36 / E46 / E9X / Z3 / ...

Genuine BMW Motor And Transmission Mount Kit - E30 325e 325es 325i 32...

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results