Home
Wheels
Wheel Spacers

H&R Wheel Spacers for BMW 5 Series E39 (1996-2003)

Clear BMW chassis

Get the wide look without buying new wheels!
BMW leaves a lot of extra space between the tire and fender. This is amplified when lowering the ride height. By pushing the wheel out further you improve the looks and the handling at the same time! The wheels sit flush with the fender for a smoother appearance. And widening the stance will give you more stability and better handling.

Spacer sizing depends on your wheel, tire, and suspension setup. Most stock BMWs will take a 10-15mm in the front or rear. We encourage our customers to measure for wheel gap before ordering. This ensures you get the final stance and clearance you're after. Measuring is quick and easy - click here for tips on measuring .
To read more about wheel spacers, including measuring and fitment tips, check out our complete spacer page.

Sub-Categories

Sort By:

H&R 15mm DR Series Wheel Spacers - 74.1mm CB - E39 E70 E71

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
We Price Match - Give Us A Call or Chat!

T#:3532

Part#: 3075740

In Stock

$ 119.99 USD

Add to Wish List

Qty

$ 119.99 USD

Add to Wish List

15mm = .59"
5/120 bolt pattern; 74.0 center bore
DR type = spacer fits in between the wheel and the hub. Longer wheel bolts are required.
Hubcentric = Yes, this spacer comes with a new hubcentric lip for the wheel to rest on

H&R's 15mm wheel spacers are Made in Germany and are TUV approved. H&R manufacturers their spacers from a super lightweight aluminum/magnesium alloy for excellent strength and also to save unsprung weight. The spacers are drilled for additional lightness and easy fitment. They are then hard anodized for durability. These are not low quality universal spacers - the bolt pattern, hub sizing, and other dimensions are designed to be used on BMW models only.

Longer wheel bolts are required. Choose from black or silver bolts from the options below.

Wheel Spacer FAQ

How To Measure for Spacers

Wheel Spacer Encyclopedia - everything you wanted to know

This item fits the following BMWs:
1997-2003 E39 BMW 525i 528i 530i 540i M5

Show More Show Less

H&R 20mm DR Series Wheel Spacers - 74.1mm CB - E39 E70 E71

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
We Price Match - Give Us A Call or Chat!

T#:3533

Part#: 4075740

In Stock

$ 131.99

This product was last offered at the strikethrough price on
01-30-2026

$ 119.99 USD

Add to Wish List

Qty

$ 119.99 USD

Add to Wish List

20mm = .79"
5/120 bolt pattern; 74.0 center bore
DR type = spacer fits in between the wheel and the hub. Longer wheel bolts are required.
Hubcentric = Yes, this spacer comes with a new hubcentric lip for the wheel to rest on

H&R's 20mm wheel spacers are Made in Germany and are TUV approved. H&R manufacturers their spacers from a super lightweight aluminum/magnesium alloy for excellent strength and also to save unsprung weight. The spacers are drilled for additional lightness and easy fitment. They are then hard anodized for durability. These are not low quality universal spacers - the bolt pattern, hub sizing, and other dimensions are designed to be used on BMW models only.

Longer wheel bolts are required. Choose from black or silver bolts from the options below.

Wheel Spacer FAQ

How To Measure for Spacers

Wheel Spacer Encyclopedia - everything you wanted to know

This item fits the following BMWs:
1997-2003 E39 BMW 525i 528i 530i 540i M5

Show More Show Less

H&R 10mm DR Series Wheel Spacers - 74.1mm CB - E39

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
We Price Match - Give Us A Call or Chat!

T#:3883

Part#: 2075740

In Stock

$ 86.99 USD

Add to Wish List

Qty

$ 86.99 USD

Add to Wish List

10mm = .39"
5/120 bolt pattern; 74.0 center bore
DR type = spacer fits in between the wheel and the hub. Longer wheel bolts are required.
Hubcentric = Yes, this spacer comes with a new hubcentric lip for the wheel to rest on

H&R's 10mm wheel spacers are Made in Germany and are TUV approved. H&R manufacturers their spacers from a super lightweight aluminum/magnesium alloy for excellent strength and also to save unsprung weight. The spacers are drilled for additional lightness and easy fitment. They are then hard anodized for durability. These are not low quality universal spacers - the bolt pattern, hub sizing, and other dimensions are designed to be used on BMW models only.

This spacer slips on the existing hub lip and includes a new lip for the wheel to rest on. 10mm spacers are considered a custom fitment and special consideration must be given to ensure the spacer is fully seated on the lip (and not bottoming out on the stock hub lip). Modification of the stock hub lip may be required.

Longer wheel bolts are required. Choose from black or silver bolts from the options below.

Wheel Spacer FAQ

How To Measure for Spacers

Wheel Spacer Encyclopedia - everything you wanted to know

This item fits the following BMWs:
1997-2003 E39 BMW 525i 528i 530i 540i M5

Show More Show Less

H&R 2475740

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
We Price Match - Give Us A Call or Chat!

T#:348217

Part#: 2475740

Ships in 3 Business Days

$ 109.99 USD

Add to Wish List

Qty

$ 109.99 USD

Add to Wish List

Enhance your BMW's stance and style with H&R TRAK+ Wheel Spacers

These spacers widen the vehicle's stance, providing improved handling, greater safety, and a sleek European aesthetic.

Benefits:

Increased lateral stability
Improved handling and safety
Sleek European style
Hub centric for accuracy
Lightweight aluminum/magnesium alloy construction

Made from a proprietary aluminum/magnesium alloy, TRAK+ wheel spacers are not only incredibly strong but also lightweight. They are hard anodized to ensure durability and resistance to chipping, scratching, and oxidation. Manufactured in Germany under ISO 9001 Quality Assurance standards, they meet the strict safety criteria of the German TÜV.

Show More Show Less

H&R 12mm DR Series Wheel Spacers - 74.1mm CB - E39 E70 E71

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
We Price Match - Give Us A Call or Chat!

T#:337915

Part#: 2475740

Ships in 3 Business Days

Starting at $ 109.99 USD

Add to Wish List

Starting at $ 109.99 USD

Add to Wish List

12mm = .47"
5/120 bolt pattern; 74.00 center bore
DR type = spacer fits in between the wheel and the hub. Longer wheel bolts are required.
Hubcentric = Yes, this spacer comes with a new hubcentric lip for the wheel to rest on

H&R's 12mm wheel spacers are Made in Germany and are TUV approved. H&R manufacturers their spacers from a super lightweight aluminum/magnesium alloy for excellent strength and also to save unsprung weight. The spacers are drilled for additional lightness and easy fitment. They are then hard anodized for durability. These are not low quality universal spacers - the bolt pattern, hub sizing, and other dimensions are designed to be used on BMW E39 models only.

Longer wheel bolts are required. Choose from black or silver bolts from the options below.

Wheel Spacer FAQ

How To Measure for Spacers

Wheel Spacer Encyclopedia - everything you wanted to know

This item fits the following BMWs:
1997-2003 E39 BMW 525i 528i 530i 540i M5

Show More Show Less

E39 20mm H&R Wheel Adapter Set To Fit E36/E46 Wheels To E39 5-series ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
We Price Match - Give Us A Call or Chat!

T#:1600

Part#: 4075740725

In Stock

9% off MSRP $ 188.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 171.99 USD

Limited Qty Sale

Add to Wish List

Qty

9% off MSRP

$ 188.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 171.99 USD

Limited Qty Sale

Add to Wish List

20mm = .79"
5/120 bolt pattern; 72.5 center bore
DRA type = spacer fits in between the wheel and the hub. The spacer is bolted to the hub with special bolts (included). Your wheel bolts to the spacer.
Hubcentric = Yes, this spacer comes with a new hubcentric lip for the wheel to rest on

These special 20mm wheel spacers allow an E39 owner to use E36 or E46 wheels on their car. These spacers are the correct 74.0mm center-bore on the inside and 72.5mm center bore on the outside for the wheel to sit on. This spacer will reduce the wheel offset by 20mm. This difference in center bore has left a lot of E39 owners out in the cold when it came to wheel options (especially in the winter). H&R has worked up this easy solution. This is a DRA spacer system - the spacer bolts to the hub with special bolts; your wheel then bolts to the spacer.Note about E36 and E46 wheels � there is a large range in offsets on these wheels. The lowest offset we have seen is 35mm; the highest offset is 49mm. The desired offset for the E39 is 20mm, depending on wheel width. H&R makes these wheel adapters in 15mm and 20mm thicknesses. If your E36/E46 wheel is above 43mm in offset, you will run into the problem of the wheel tucked in too far. When looking at E36/E46 wheels, try to stay in the 35-43mm offset range.Spacers are sold in pairs (1 axle). This item fits the following BMWs:
1997-2003 E39 BMW 525i 528i 530i 540i M5

Show More Show Less

H&R 30mm DRA Series Bolt-On Wheel Spacers - 74.1mm CB - E39 E70 E71 ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
We Price Match - Give Us A Call or Chat!

T#:3535

Part#: 6075740

Ships in 3 Business Days

$ 209.99 USD

Add to Wish List

Qty

$ 209.99 USD

Add to Wish List

30mm = 1.18"
5/120 bolt pattern; 74.0 center bore
DRA type = spacer fits in between the wheel and the hub. The spacer is bolted to the hub with special bolts (included). Your wheel bolts to the spacer.
Hubcentric = Yes, this spacer comes with a new hubcentric lip for the wheel to rest on

H&R's 30mm wheel spacers are Made in Germany and are TUV approved. H&R manufacturers their spacers from a super lightweight aluminum/magnesium alloy for excellent strength and also to save unsprung weight. The spacers are drilled for additional lightness and easy fitment. They are then hard anodized for durability. These are not low quality universal spacers - the bolt pattern, hub sizing, and other dimensions are designed to be used on BMW models only.

This is a DRA-type spacer - the spacer is bolted to the hub with special bolts (included). You then bolt to your wheel to the spacer with your stock wheel bolts.

Wheel Spacer FAQ

How To Measure for Spacers

Wheel Spacer Encyclopedia - everything you wanted to know

This item fits the following BMWs:
1997-2003 E39 BMW 525i 528i 530i 540i M5

Show More Show Less

H&R 25mm DRA Series Bolt-On Wheel Spacers - 74.1mm CB - E39 E70 E71 ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
We Price Match - Give Us A Call or Chat!

T#:3534

Part#: 5075740

Ships in 3 Business Days

$ 189.99 USD

Add to Wish List

Qty

$ 189.99 USD

Add to Wish List

25mm = .98"
5/120 bolt pattern; 74.0 center bore
DRA type = spacer fits in between the wheel and the hub. The spacer is bolted to the hub with special bolts (included). Your wheel bolts to the spacer.
Hubcentric = Yes, this spacer comes with a new hubcentric lip for the wheel to rest on

H&R's 25mm wheel spacers are Made in Germany and are TUV approved. H&R manufacturers their spacers from a super lightweight aluminum/magnesium alloy for excellent strength and also to save unsprung weight. The spacers are drilled for additional lightness and easy fitment. They are then hard anodized for durability. These are not low quality universal spacers - the bolt pattern, hub sizing, and other dimensions are designed to be used on BMW models only.

This is a DRA-type spacer - the spacer is bolted to the hub with special bolts (included). You then bolt to your wheel to the spacer with your stock wheel bolts.

Wheel Spacer FAQ

How To Measure for Spacers

Wheel Spacer Encyclopedia - everything you wanted to know

This item fits the following BMWs:
1997-2003 E39 BMW 525i 528i 530i 540i M5

Show More Show Less

E39, E70 15mm H&R Wheel Adapter Set To Fit E36/E46 Wheels To E39 5-se...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
We Price Match - Give Us A Call or Chat!

T#:860

Part#: 3075740725

Ships in 3 Business Days

$ 153.99 USD

Add to Wish List

Qty

$ 153.99 USD

Add to Wish List

15mm = .59"
5/120 bolt pattern; 74.0 to 72.5 center bore
DR type = spacer fits in between the wheel and the hub. Longer wheel bolts are required.
Hubcentric = Yes, this spacer comes with a new hubcentric lip for the wheel to rest on

These special 15mm wheel spacers allow an E39 owner to use E36 or E46 wheels on their car. These spacers are the correct 74.0mm center-bore to fit on the hub and 72.5mm center bore on the outside for the wheel to sit on. This spacer will reduce the wheel offset by 15mm. This difference in center bore has left a lot of E39 owners out in the cold when it came to wheel options (especially in the winter). H&R has worked up this easy solution.Note about E36 and E46 wheels � there is a large range in offsets on these wheels. The lowest offset we have seen is 35mm; the highest offset is 49mm. The desired offset for the E39 is 20mm, depending on wheel width. H&R makes these wheel adapters in 15mm and 20mm thicknesses. If your E36/E46 wheel is above 43mm in offset, you will run into the problem of the wheel tucked in too far. When looking at E36/E46 wheels, try to stay in the 35-43mm offset range.Spacers are sold in pairs (1 axle) without bolts.

This item fits the following BMWs:
1997-2003 E39 BMW 525i 528i 530i 540i M5

Show More Show Less

H&R 5mm DR Series Wheel Spacers - 74.1mm CB - E39 E70 E71

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
We Price Match - Give Us A Call or Chat!

T#:3531

Part#: 1075740

Back Ordered

$ 89.99 USD

Add to Wish List

Qty

$ 89.99 USD

Add to Wish List

5mm = .20"
5/120 bolt pattern; 74.0 center bore
DR type = spacer fits in between the wheel and the hub. Longer wheel bolts are required.
Hubcentric = Yes*, the original hub lip still protrudes through the spacer

H&R's 5mm wheel spacers are Made in Germany and are TUV approved. H&R manufacturers their spacers from a super lightweight aluminum/magnesium alloy for excellent strength and also to save unsprung weight. The spacers are drilled for additional lightness and easy fitment. They are then hard anodized for durability. These are not low quality universal spacers - the bolt pattern, hub sizing, and other dimensions are designed to be used on BMW models only.

This spacer slips on the existing hub lip and leaves some lip left over for the wheel to rest on. This keeps the wheel hubcentric*.
* - To avoid vibration, 5mm spacers work best with wheels that have a flush mounting surface. Wheels that have a bevel around the mounting surface will not be fully seated on the hub and a vibration may result.

Longer wheel bolts are strongly recommended. Choose from black or silver bolts from the options below. Wheel locks to work with this spacer size are also available.

Wheel Spacer FAQ

How To Measure for Spacers

Wheel Spacer Encyclopedia - everything you wanted to know

This item fits the following BMWs:
1997-2003 E39 BMW 525i 528i 530i 540i M5

Show More Show Less

DR Series Wheel Spacers - 12mm - 1 Pair - Black

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:55102431

Part#: 2475740SW

Ships in 3 Business Days

$ 109.99 USD

Add to Wish List

Qty

$ 109.99 USD

Add to Wish List

These spacers save crucial unsprung weight while offering unyielding structural integrity under heavy load.

DRA Series Wheel Spacers - 25mm - Pair - Black

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:55102442

Part#: 5075740SW

Ships in 3 Business Days

$ 189.99 USD

Add to Wish List

Qty

$ 189.99 USD

Add to Wish List

Perfect your BMW’s stance and eliminate unsightly fender gap with these premium 25mm H&R DRA Series Bolt-On Wheel Spacers.

DRA Series Wheel Spacers - 30mm - Black

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:55102444

Part#: 6075740SW

Ships in 3 Business Days

$ 209.99 USD

Add to Wish List

Qty

$ 209.99 USD

Add to Wish List

The track-tested way to optimize your BMW's footprint is with H&R Trak+ 30mm DRA Wheel Spacers.

DR Series Wheel Spacers - 20mm - Black

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:55102438

Part#: 4075740SW

Ships in 3 Business Days

$ 119.99 USD

Add to Wish List

Qty

$ 119.99 USD

Add to Wish List

Give your classic E39 5-Series or X-Series BMW the aggressive stance and sharp handling it deserves with a pair of H&R 20mm DR Series Wheel Spacers.

Select Vehicle

Category

Home
Wheels

Wheel Spacers

Brand

Price

Special Offers

New (4)