BMW Transmission Filter Kits & Transmission Service Parts for BMW X Series E70 (2007-2013)

Automatic transmissions are reliable, shift smoothly, and can last without issue so long as they are properly maintained. Over time, the transmission fluid becomes thick and the filter becomes contaminated with small metal particles. This can cause excess wear, high transmission operating temperatures, and eventual failure. To prevent this we recommend changing your filter, fluid, and seals to ensure your transmission continues to operate flawlessly. We recommend filter and fluid changes every 50,000 miles.

Kit Includes:

• Automatic transmission filter with associated hardware
• Oil pan gasket
• Drain plug with sealing washer
• Fill plug with sealing washer
• 7 quarts automatic transmission fluid

Fits the following BMW chassis with 8 speed transmissions:
E70, E71, F01, F02, F06, F07, F10, F12, F13, F13, F15, F16, F22, F23, F25, F26, F30, F31, F32, F33, F34, F36, G11

GA6HP26Z Automatic Transmission
Automatic transmissions are reliable, shift smoothly, and can last without issue so long as they are properly maintained. Over time, the transmission fluid becomes thick and the filter becomes contaminated with small metal particles. This can cause excess wear, high transmission operating temperatures, and eventual failure. To prevent this we recommend changing your filter, fluid, and seals to ensure your transmission continues to operate flawlessly. We recommend filter and fluid changes every 50,000 miles. This kit includes the transmission filter, gasket and bolts.

This item fits the following BMWs:
E60 BMW 545i 550i 
E63/4 BMW 645Ci 650i  
E65/6 BMW 745i/Li 750i/Li 760i/Li 
E70 BMW 3.5d/dX, 4.8i N62
E71 BMW 50iX N63

The ZF 8-speed automatic transmission (8HP) has become the go-to choice for performance enthusiasts, delivering lightning-fast shifts, impressive torque handling, and ample tuning potential. However, the stock transmission pan falls short in critical areas. Its plastic construction, integrated non-replaceable filter, and limited fluid volume leave little margin for error in demanding conditions.

To address these limitations, we've engineered a premium solution: a cast aluminum transmission pan that boosts durability, cooling performance, and serviceability. Designed with enthusiasts in mind, this upgraded pan increases fluid capacity by 1 liter to reduce transmission temperatures and improve long-term reliability, even under aggressive driving or track conditions.

Built to outlast and outperform the OEM plastic pan, the aluminum construction resists damage from road debris and eliminates the risk of cracking. Our pan is hard-coat anodized in black for superior corrosion protection and a long-lasting finish that looks as good as it performs.

Our aluminum pan upgrade is engineered to work seamlessly with the OEM G8X 8HP transmission filter (24007855263), allowing for easy and cost-effective fluid service. Integrated magnets help to trap metal particulate, extending the life of your transmission by keeping contaminants out of the fluid.

Key Features:

Cast aluminum construction offers superior strength and resilience over the OE plastic pan

Increased fluid capacity (+1L) enhances thermal management and reduces the risk of overheating

Serviceable design uses the OEM G8X transmission filter for easy, affordable maintenance

Hard coat anodized finish provides exceptional corrosion resistance and longevity

Integrated magnets collect metallic debris, protecting transmission internals

Installation:

Vehicle plastic belly pans may vary. Because the Turner 8HP transmission pan is taller to allow for increased fluid capacity, some vehicles may require trimming of the plastic belly pan, or the belly pan may need to be installed over the transmission pan where it may make contact.

All sets of 12 now 10% off regular price!

Red Line 75W140 is a full synthetic high-performance gear oil that is an excellent substitute for expensive factory fluid and an upgrade over off-the-shelf economy fluid. Red Line thoroughly evaluates the manufacturer's recommendations and only makes a fluid recommendation if their own product meets or exceeds the original specification. In many cases the Red Line synthetic will outperform the factory supplied fluids. We've been using Red Line Oil in our BMWs since we opened in 1994 and it remains our best selling BMW differential fluid. 75/140 is a specialized weight used for BMW M3, M5, and M6 models with the M Variable limited slip diff (all M models since 2001). Red Line fluid is used in nearly all E46 M3, E92 M3, E60 M5 we service as well as the custom differentials that we sell. It's great for the street where the polyol-ester base has natural lubricity and friction modifiers lead to smoother and quieter operation with lower operating temps than the factory fluid. We also use it in the track cars we build and prep. It may also be used in other specialized situations where a regular 75/90 will be too thin at elevated temperatures and your diff builder has approved a heavier weight oil.

Recommended for API GL-5, GL-6, MT-1, MIL-L-2105E, and SAE J2360. An alternative to the very expensive factory BMW SAF-XJ+FM diff fluid (#83222282583).

Rein Transfer Case Fluid TF 0870 is designed to service your BMW xDrive transfer case, ensuring optimal performance and reliability. This genuine BMW fluid is essential for maintaining the efficiency of your transfer case, especially if you are nearing or exceeding the 60,000-mile mark. Using Rein Transfer Case Fluid TF 0870 helps to catch up on crucial maintenance and keep your vehicle running smoothly.

• Genuine BMW Fluid: Ensures compatibility and peak performance for BMW xDrive transfer cases.
• Optimal Performance: Helps maintain the efficiency of the transfer case, enhancing overall vehicle reliability.
• Preventive Maintenance: Ideal for vehicles approaching or exceeding 60,000 miles to ensure continued smooth operation.
• High-Quality Formulation: Designed to meet BMW's specifications for superior protection and longevity.

Liqui Moly Top Tec 1800 Automatic Transmission Fluid - 20 Liters

Fully synthetic leading-edge, high-performance automatic transmission fluid. Developed to meet the severe requirements of modern multi-speed transmissions designed with 6 or more gears. The use of modern additive technology provides ultimate protection, longer fluid life, and stability combined with ideal shift quality under all operating conditions.

Properties:

• Excellent viscosity/temperature properties
• Prevents foam formation
• Enables a multifaceted range of applications
• Outstanding friction characteristics
• High resistance to aging
• Very good low-temperature properties
• Excellent corrosion protection
• Very wear-resistant
• Outstanding resistance to oxidation

Approvals:

Dexron VI

Ford Mercon LV

LiquiMoly recommends this product for vehicles that need to comply with the following specifications:

• Aisin Warner AW-1
• BMW 83 22 0 142 516
• BMW 83 22 2 152 426
• BMW 83 22 2 289 720
• BMW 83 22 2 305 396
• BMW 83 22 2 305 397
• BMW 83 22 2 355 599
• BMW M-1375.4
• MB 236.12
• MB 236.14
• VW G 055 005
• VW G 055 540
• VW G 060 162

BMW Automatic Transmission Service Kit - Level 2 - Lifeguard 6 is a comprehensive service solution that includes everything needed to effectively maintain and service your BMW's transmission using high-quality ZF components and fluid. While BMW suggests that the ZF transmission utilizes a lifetime fluid, it’s important to understand that “lifetime” refers to the warranty, not the transmission's operational lifespan. Over time, the fluid degrades, becoming less effective at transferring heat and lubricating internal components. This degradation can lead to premature wear, resulting in louder operation, harder shifts, and potentially severe internal damage.

ZF recommends service intervals of 50,000 miles or 8 years—whichever comes first—for 6HP transmissions. By using OEM ZF components in this kit, BMW owners can ensure that only the highest quality factory parts and fluids are used, keeping the transmission running smoothly for years to come.

Benefits:

• Comprehensive Kit: Contains all necessary components for a complete transmission service, ensuring an efficient and thorough maintenance process.
• High-Quality OEM Parts: Includes ZF components, guaranteeing compatibility and superior performance.
• Prevents Premature Wear: Regular service helps avoid costly repairs by maintaining fluid integrity and component lubrication.
• Improves Performance: Enhanced fluid conditions contribute to smoother shifting and quieter operation.
• Recommended Service Intervals: Follows ZF’s guidelines for optimal maintenance, promoting longevity in your BMW’s transmission.