Turner Motorsport | BMW Eurosport Cold-Air Intake Kits

BMW Performance Chips & Software
BMW Exterior & Aerodynamics
BMW Brake Parts
BMW Differential & Clutch
BMW Engine Parts
BMW Intake Kits
BMW Exhaust Parts
BMW Interior Parts
BMW Lighting Parts
BMW Suspension Parts
BMW Wheels & Spacers
BMW Race Parts
BMW Maintenace Parts & Tools
BMW Clothing
BMW Used Parts
BMW Parts Specials
BMW Tech Tips & Info

Useful links:
BMW Chassis Codes BMW Warranty Info

Eurosport Cold-Air Intake Kits

Description: Pick up 10-20 extra horsepower by replacing your restrictive stock airbox with a Eurosport Cold Air Intake! The finest Cold Air Intake Kit that we have seen, hands-down! This kit eclipses all others with its superior engineering, materials, fitment, and of course, performance. Starting at $389.95 it’s a little more expensive than some other kits but worth every penny. This intake is not just a simple heat shield with a cone filter – every aspect of the design has been analyzed to improve on the concept of a Cold Air Intake. As the purpose of a Cold Air Intake is to draw in cooler, denser air by blocking hot air from the engine, this kit’s engineering starts with the materials.

Heat Shield – While other intake kits use sheetmetal or aluminum to shield the filter from hot air, the Eurosport kit is designed with a composite material that is very resistant to heat. The shield is made from e-glassfiber, and has a heat transfer coefficient 100 times lower than aluminum! Why use metal to block heat? The composite shield is also very light and stiff. The entire intake kit weighs less than 6lbs, including the filter – compared to close to 20lbs for some other intake kits!

Intake Tube – For the same reasons as on the heat shield, the intake tube between the filter and the air flow sensor is made from carbon fiber. The carbon fiber is strong, light weight, and is compression molded for an exact fit and excellent air flow. It also looks cool (pun intended).

Air Filter – No compromises were made designing this intake. While a well-known American brand would have been more recognizeable to consumers, the ITG foam air filter proved superior during dyno testing. It’s also washable and serviceable meaning a long life and exceptional dust retention. ITG may not be as famous in America as other brands, but it’s one of the most popular filters in Europe and Asia. ITG Filters can be found in Championship-winning Touring Cars, Japanese SuperGT winners, ALMS, Grand-Am, and even Formula 1. ITG Air Filters come pre-oiled for immediate installation.

Eurosport Intakes come with all necessary hardware, detailed instructions, and extra dust-retention oil. When installed, the shield provides a tight seal in the engine bay for the filter to draw cool air. The black finish with carbon fiber, and excellent craftsmanship, provides a “factory appearance”, showing off in a subtle way. We offer Eurosport Intakes for the BMW E36 3-series, E46 3-series, E39 5-series, and the Z3.

We offer Eurosport Cold-Air Intake Kits for the following BMWs (click to change)

APPLICATIONS

YEAR

DESCRIPTION

PRICE

BUY

larger

Eurosport Cold-Air Intake Kit for E36 325i / 328i / 323i & M3
325i/328i323i/M3 (E36)

1993-1999

This kit simply replaces the very restrictive factory air box with a free flowing, reusable ITG foam air filter and mandrel bent intake tube which provides smooth cool air flow to the engine. Unlike similar styled “cone filter” kits the Eurosport intake features a custom molded heat shield. This shield provides protection from the engine's power-robbing hot air and is a perfect fit to your engine bay. Metric hardware and rubber stripping is also included to give the kit a factory installed appearance. 12-page instruction book with photos makes installation a breeze. There is not a better Cold Air Intake Kit on the market. Why do we use an ITG Foam filter? The best-performing and safest low-restriction performance air filter you can buy: Testing has shown these filters to remove all particles above 10 microns in size. The particles between 10 and 20 are most harmful to your engine. Compare this to cotton gauze which cannot filter below 20 microns. The ITG has a much higher tolerance for dust penetration than other filters on the market, maintaining up to 80% of its flow capacity when dirty. Lower maintenance than other filters, it simply needs to be wiped off or the occasional wash.

Click Here to learn more about ITG Foam Filters!

$389.95

larger

Eurosport Intake Upgrade Kit for E36 M3 (Converts US kit to Euro 3.5 in kit)
M3 (E36)

1994-1995

Convert your standard E36 M3 Eurosport intake to the EURO 3.5" Eurosport Intake system, with this upgrade / conversion kit. This kit includes all parts needed to convert your "standard" 1995 M3 Eurosport intake kit to one that accomodates the larger 3.5" Euro or 540i HFM.

Parts included: (1) larger diameter carbon fiber intake tube, (1) larger diameter ITG filter, all hardware required, and instructions on modifying your existing US heat shield to work with the Euro kit intake tube/filter.

This conversion kit is for those who have already purchased the standard 1995 M3 US Eurosport Intake kit (3.0") and wish to upgrade it for use with the 3.5" Euro or 540 HFM. The Eurosport E36 M3 Intake Upgrade Kit includes all the parts needed to convert your standard 1995 M3 Eurosport intake kit to accomodate the larger diameter 3.5" Euro or 540 HFM. Kit includes larger diameter carbon fiber intake tube, larger diameter ITG filter, hardware kit and instructions to modify your heat shield.

$316.90

larger

Eurosport Cold-Air Intake Kit for E36 M3 with 3.5 inch HFM (Euro, 540i or Porsche)
M3 (E36)

1995-1999

This is the Eurosport Intake for a Euro 3.5” HFM (Euro M3, 540 HFM, Porsche HFM, etc). This cold air intake features composite materials for better heat resistance than metal intake kits. The heat shield is made of composite e-glassfiber and the intake tube is compression-molded carbon fiber. The Eurosport Intake uses a ITG cone-style air filter, which has proved make more horsepower on the dyno than similar cone air filters. Altogther, this kit weighs less than 6lbs. Hardware, detailed instructions, and dust retention oil is included (filter is pre-oiled). When installed, the shield provides a tight seal in the engine bay for the filter to draw cool air. The black finish with carbon fiber, and excellent craftsmanship, provides a “factory appearance”, showing off in a subtle way.

NOTE: This kit does not include the 3.5" HFM. You must supply your own HFM. This is the intake kit only (see picture above for included parts).

$399.95

larger

Eurosport Cold Air Intake Kit for E39 528i Dual Vanos (1999-2000) and 525i (2001-2003)
525i 528i (E39)

1999-2003

This kit simply replaces the very restrictive factory air box found on the 1999-2000 BMW 528i and 2001-2003 525i with a free flowing, reusable ITG foam air filter and mandrel bent intake tube which provides smooth cool air flow to the engine. Unlike similar styled "cone filter" kits, the Eurosport intake features a custom molded heat shield. This shield provides protection from the engine's power-robbing hot air and is a perfect fit to your 525i or 528i 5 series engine bay. The hood acts as the intake's cover – completely sealing the filter off. Intake air is drawn in from the factory inlet between the radiator and the headlight. Metric hardware and rubber stripping is also included to give the kit a factory installed appearance. A 12-page instruction book with photos makes installation a breeze for weekend mechanics or professionals. No cutting or modifying of stock components is required. There is not a better Cold Air Intake Kit on the market for the dual vanos powered E39 528i (1999-200) and 525i (2001-2003).

Why an ITG Foam filter? Because it’s the best-performing and safest low-restriction performance air filter you can buy. Testing has shown these filters to remove all particles above 10 microns in size. The particles between 10 and 20 are most harmful to your engine. Compare this to cotton gauze, which cannot filter below 20 microns. The ITG has a much higher tolerance for dust penetration than other filters on the market, maintaining up to 80% of its flow capacity when dirty. Lower maintenance than other filters, it simply needs to be wiped off or the occasional wash.

This Cold Air Intake Kit fits the following BMWs:
1999-2000 E39 528i sedan & wagon
2001-2003 E39 525i sedan & wagon

$389.95

larger

Eurosport Cold Air Intake Kit for E39 528i Single Vanos (1997-1998)
528i (E39)

1997-1998

This kit simply replaces the very restrictive factory air box found on the early (1997 and 1998) model E39 528i with a free flowing, reusable ITG foam air filter and mandrel bent intake tube which provides smooth cool air flow to the engine. Unlike similar styled "cone filter" kits, the Eurosport intake features a custom molded heat shield. This shield provides protection from the M52 engine's power-robbing hot air and is a perfect fit to your 5 series engine bay. The hood acts as the intake's cover – completely sealing the filter off. Intake air is drawn in from the factory inlet between the radiator and the headlight. Metric hardware and rubber stripping is also included to give the kit a factory installed appearance. A 12-page instruction book with photos makes installation a breeze for weekend mechanics or professionals. No cutting or modifying of stock components is required. There is not a better Cold Air Intake Kit on the market for the 1997 and 1998 model BMW 528i.

Why an ITG Foam filter? Because it’s the best-performing and safest low-restriction performance air filter you can buy. Testing has shown these filters to remove all particles above 10 microns in size. The particles between 10 and 20 are most harmful to your engine. Compare this to cotton gauze, which cannot filter below 20 microns. The ITG has a much higher tolerance for dust penetration than other filters on the market, maintaining up to 80% of its flow capacity when dirty. Lower maintenance than other filters, it simply needs to be wiped off or the occasional wash.

This Cold Air Intake Kit fits the following BMWs:
1997-1998 E39 528i sedan and wagon

$389.95

larger

Eurosport Cold Air Intake Kit for E39 530i (2001-2003)
530i (E39)

2001-2003

This kit simply replaces the very restrictive factory air box found on the E39 530i with a free flowing, reusable ITG foam air filter and mandrel bent intake tube which provides smooth cool air flow to the engine. Unlike similar styled "cone filter" kits, the Eurosport intake features a custom molded heat shield. This shield provides protection from the 530i engine's power-robbing hot air and is a perfect fit to your 5 series engine bay. The hood acts as the intake's cover – completely sealing the filter off. Intake air is drawn in from the factory inlet between the radiator and the headlight. Metric hardware and rubber stripping is also included to give the kit a factory installed appearance. A 12-page instruction book with photos makes installation a breeze for weekend mechanics or professionals. No cutting or modifying of stock components is required. There is not a better Cold Air Intake Kit on the market for the E39 530i.

Why an ITG Foam filter? Because it’s the best-performing and safest low-restriction performance air filter you can buy. Testing has shown these filters to remove all particles above 10 microns in size. The particles between 10 and 20 are most harmful to your engine. Compare this to cotton gauze, which cannot filter below 20 microns. The ITG has a much higher tolerance for dust penetration than other filters on the market, maintaining up to 80% of its flow capacity when dirty. Lower maintenance than other filters, it simply needs to be wiped off or the occasional wash.

This Cold Air Intake Kit fits the following BMWs:
2001, 2002, 2003 E39 530i sedan

$389.95

larger

Eurosport Cold-Air Intake Kit for E39 540i
540i (E39)

1997-2003

This kit simply replaces the very restrictive factory E39 540i air box with a free flowing, reusable ITG foam air filter and mandrel bent intake tube which provides smooth cool air flow to the engine. Unlike similar styled "cone filter" kits the Eurosport 540i intake features a custom molded heat shield. This shield provides protection from the engine's power-robbing hot air and is a perfect fit to your engine bay. The hood acts as the intake's cover – completely sealing the filter off. Intake air is drawn in from the factory inlet between the radiator and the headlight. Metric hardware and rubber stripping is also included to give the kit a factory installed appearance. A 12-page instruction book with photos makes installation a breeze for weekend mechanics or professionals. No cutting or modifying of stock components is required. There is not a better Cold Air Intake Kit on the market for the E39 540i.

Why use an ITG Foam filter? Because it’s the best-performing and safest low-restriction performance air filter you can buy. Testing has shown these filters to remove all particles above 10 microns in size. The particles between 10 and 20 are most harmful to your engine. Compare this to cotton gauze, which cannot filter below 20 microns. The ITG has a much higher tolerance for dust penetration than other filters on the market, maintaining up to 80% of its flow capacity when dirty. Lower maintenance than other filters, it simply needs to be wiped off or the occasional wash.

This Cold Air Intake Kit fits the following BMWs:
1997-1998 E39 540i sedan
1999-2000 E39 540i sedan & sport/touring wagon
2001-2003 E39 540i sedan & sport/touring wagon

$389.95

larger

Eurosport Cold-Air Intake Kit for E46 323i/323Ci & 328i/328Ci
323i/328i (E46)

1999-2000

This kit simply replaces the very restrictive factory air box with a free flowing, reusable ITG foam air filter and mandrel bent intake tube which provides smooth cool air flow to the engine. Unlike similar styled “cone filter” kits the Eurosport intake features a custom molded heat shield. This shield provides protection from the engine's power-robbing hot air and is a perfect fit to your engine bay. The hood acts as the intake’s cover – completely sealing the filter off. Intake air is drawn in from the factory inlet between the radiator and the headlight. Metric hardware and rubber stripping is also included to give the kit a factory installed appearance. A 12-page instruction book with photos makes installation a breeze for weekend mechanics or professionals. No cutting or modifying of stock components is required. There is not a better Cold Air Intake Kit on the market. Why do we use an ITG Foam filter? Because it’s the best-performing and safest low-restriction performance air filter you can buy. With the Shark Injector and this intake, gains were 17 hp / +8 ft-lbs torque at peak (with a big torque gain in the mid-range). Testing has shown these filters to remove all particles above 10 microns in size. The particles between 10 and 20 are most harmful to your engine. Compare this to cotton gauze, which cannot filter below 20 microns. The ITG has a much higher tolerance for dust penetration than other filters on the market, maintaining up to 80% of its flow capacity when dirty. Lower maintenance than other filters, it simply needs to be wiped off or the occasional wash.

$389.95

larger

Eurosport Cold-Air Intake Kit for E46 325i 325Ci & 325xi
325i/ci (E46)

2001-2005

Eurosport Cold Air Intake Kit for the 2001-2006 E46 325i sedan, coupe, cabrio, and touring wagon
This kit simply replaces the very restrictive factory air box with a freer-flowing cone-style filter kit which provides smooth cool air flow to the engine. Unlike similar styled “cone filter” kits the Eurosport intake features a composite custom-molded heat shield and carbon fiber mandrel-bent intake tube - no metal to attract heat! This composite shield provides protection from the engine's power-robbing hot air and is a perfect fit to your engine bay. The hood acts as the intake’s cover – completely sealing the filter off from the heat of the engine bay. The filter itself is a European ITG foam piece specially engineered for maximum flow, minimum noise, and easy maintenance. It's re-usable with the only maintenance an occassional wash and re-oil. The filter draws air from the factory inlet between the radiator and the headlight. Metric hardware and rubber stripping is also included to give the kit a factory installed appearance. A 12-page instruction book with photos makes installation a breeze for weekend mechanics or professionals. No cutting or modifying of tock components is required. There is not a better Cold Air Intake Kit on the market.

Why do we use an ITG Foam filter? Because it’s the best-performing and safest low-restriction performance air filter you can buy. Testing has shown these filters to remove all particles above 10 microns in size. The particles between 10 and 20 are most harmful to your engine. Compare this to cotton gauze, which cannot filter below 20 microns. The ITG has a much higher tolerance for dust penetration than other filters on the market, maintaining up to 80% of its flow capacity when dirty. Lower maintenance than other filters, it simply needs to be wiped off or the occasional wash.

This Eurosport Cold Air Intake works on all 2001-2006 E46 325i models, including 325i, 325xi, 325Ci, and 325i Touring wagon. Choose your exact model from the list below and note that the 325i with the M56 engine uses a different intake than other 325i's.

Does your 325 have the M56 "SULEV" Engine? Many of the 325's produced for the US -- particularly in California, Massachusetts, and a few other states -- came with a different engine, the M56 which meets "SULEV" (Super Ultra Low Emission Vehicle) emissions classification. A visual inspection of your engine (as shown below) is the best way to determine if your 325 has the M56 SULEV engine.