Turner Motorsport BMW Parts click for details Turner Motorsport


 
 


Useful links:
 BMW Chassis Codes BMW Warranty Info

 
 H&R Wheel Spacers

 Description:  When it comes to all-out cornering performance, one rule applies: wider is really, truly better. H&R TRAK+ wheel spacers let you balance the handling and performance of your car to suit your aggressive driving style. Most manufacturers, even Porsche and BMW, leave 20 to 30mm of extra space between the tire and the fender to suit arcane regulations or to leave space for flapping tire chains. These light-alloy spacers push your existing wheels or even your hot, aftermarket alloys out to fill the wheelwells properly, giving you better cornering, better aerodynamics and even better looks.

Spacers are purchased based on the size required - click here for tips on how to measure.

Please see our partner AllSprings.com for non-BMW applications


We offer H&R Wheel Spacers for the following BMWs (click to change)

 E30 H&R Wheel Spacers E36 H&R Wheel Spacers E46 H&R Wheel Spacers E90 H&R Wheel Spacers E92 H&R Wheel Spacers E28 H&R Wheel Spacers E34 H&R Wheel Spacers E39 H&R Wheel Spacers E24 H&R Wheel Spacers E32 H&R Wheel Spacers E38 H&R Wheel Spacers E60 H&R Wheel Spacers E63 H&R Wheel Spacers E53 H&R Wheel Spacers E70 H&R Wheel Spacers Mini H&R Wheel Spacers
APPLICATIONS YEAR   DESCRIPTION PRICE BUY

larger 		H&R 5-lug 10mm DR Wheel Spacers (pair)
 M5 (E24 E28 E30 E32 E34 E36 E38 E46 E60 E63 E90 E92) 		1982-- 10mm = .39 inch; H&R Hubcentric wheel spacers (pair). Fits over the stock BMW hub lip and includes a new hub lip for your wheel to rest on. Made in Germany and TUV approved. Longer wheel bolts are required - available in bright silver or black.

A note about 10mm spacers: Any 10mm spacer is considered a custom fitment. The stock hubcentric lip on BMWs can stick out by as much as 11mm. This leaves a gap between the spacer and the hub which seriously compromises safety. We recommend using a larger spacer (12mm and larger do not have this issue) or check that the lip sticks out less than 10mm.
These spacers will not fit with Kosei wheels or any other wheel that has a shorter than factory bevel inside the centerbore
 		$95.00

larger 		BMW 5-lug (except E39) H&R 3mm Wheel Spacers (pair)
 many (E24 E28 E30 E32 E34 E36 E38 E46 E60 E63 E90 E92) 		1982-- 3mm = .12"; H&R Hubcentric wheel spacers (pair). Fits over the stock BMW hub lip. Made in Germany and TUV approved. Longer wheel bolts are required - available in bright silver or black.

*3mm Spacers require you have a flush mounting surface on your wheels.
Wheels with a beveled mounting surface are not compatible with these spacers.

 		$68.95

larger 		BMW 5-lug (except E39) H&R 20mm Bolt-On (DRA) Wheel Spacers (pair)
 many (E24 E28 E30 E32 E34 E36 E38 E46 E60 E63 E90 E92) 		1982-- Fits between the back of the wheel and your car's hub. Made in Germany with TUV approval. Bolts directly to the hub. One pair and 10 mounting bolts are included (the spacer bolts to the hub and the wheel is bolted to the spacer). $149.95

larger 		BMW 5-lug (except E39) H&R 5mm Wheel Spacers (pair)
 many (E24 E28 E30 E32 E34 E36 E38 E46 E60 E63 E90 E92) 		1982-- 5mm = .2"; H&R Hubcentric wheel spacers (pair). Fits over the stock BMW hub lip. The factory lip remains with about 5-6mm left over for the wheel to rest on*. Made in Germany and TUV approved. Longer wheel bolts are required - available in bright silver or black.

*5mm Spacers require you have a flush mounting surface on your wheels.
Wheels with a beveled mounting surface are not compatible with these spacers. If you have beveled wheels and wish to run a 5mm spacer on the front, you can use the TMS Hub Extender kit (front only!) See link below.

 		$49.95

larger 		BMW 5-lug (except E39) H&R 15mm Wheel Spacers (pair)
 many (E24 E28 E30 E32 E34 E36 E38 E46 E60 E63 E90 E92) 		1982-- 15mm = .59"; H&R Hubcentric wheel spacers (pair). Fits over the stock BMW hub lip and includes a new hub lip for your wheel to rest on. Made in Germany and TUV approved. Longer wheel bolts are required - available in bright silver or black. $95.95

larger 		BMW 5-lug (except E39) H&R 20mm Wheel Spacers (pair)
 many (E24 E28 E30 E32 E34 E36 E38 E46 E60 E63 E90 E92) 		1982-- 20mm = .79"; H&R Hubcentric wheel spacers (pair). Fits over the stock BMW hub lip and includes a new hub lip for your wheel to rest on. Made in Germany and TUV approved. Longer wheel bolts are required - available in bright silver or black. $99.95

larger 		BMW 5-lug (except E39) H&R 25mm Wheel Spacers (pair)
 many (E24 E28 E30 E32 E34 E36 E38 E46 E60 E63 E90 E92) 		1982-- 25mm = .98"; H&R Hubcentric wheel spacers (pair). These spacers bolt to the car's existing hub, then your wheel bolts to the spacer with the car's stock wheel bolts. These spacers include a new hub lip for your wheel to rest on. Made in Germany and TUV approved. Mounting bolts are included. $149.95

larger 		BMW 5-lug (except E39) H&R 30mm Wheel Spacers (pair)
 many (E24 E28 E30 E32 E34 E36 E38 E46 E60 E63 E90 E92) 		1982-- 30mm = 1.18"; H&R Hubcentric wheel spacers (pair). These spacers bolt to the car's existing hub, then your wheel bolts to the spacer with the car's stock wheel bolts. These spacers include a new hub lip for your wheel to rest on. Made in Germany and TUV approved. Mounting bolts are included. $179.95

larger 		BMW 5-lug (except E39) H&R 12mm Wheel Spacers (pair)
 many (E24 E28 E30 E32 E34 E36 E38 E46 E60 E63 E90 E92) 		1982-- 12mm = .47"; H&R Hubcentric wheel spacers (pair). Fits over the stock BMW hub lip and includes a new hub lip for your wheel to rest on. Made in Germany and TUV approved. Longer wheel bolts are required - available in bright silver or black. $95.00

larger 		E30 5mm 4/100 H&R Wheel Spacers (pair)
 318i/325e/i (E30) 		1984-1991

E30 4-lug; 5mm =.2"; 35mm wheel bolt required!

5mm Spacers require you have a flush mounting surface on your wheels.
Wheels with a beveled mounting surface are not compatible with these spacers.

 		$49.95

larger 		E30 8mm 4/100 H&R Wheel Spacers (pair)
 318i/325e/i (E30) 		1984-1991 E30 4-lug; 8mm =.3"; longer wheel bolts are required, see below! $58.95

larger 		E30 15mm 4/100 H&R Wheel Spacers (pair)
 318i/325e/i (E30) 		1984-1991 E30 4-lug; 15mm =.59"; longer wheel bolts are required, see below! $95.95

larger 		E30 20mm 4/100 H&R Wheel Spacers (pair)
 318i/325e/i (E30) 		1984-1991 E30 4-lug; 20mm =.79"; longer wheel bolts are required, see below! $99.95

larger 		E30 25mm 4/100 H&R Wheel Spacers (pair)
 318i/325e/i (E30) 		1984-1991 E30 4-lug; 25mm=.98"; bolts included $149.95

larger 		H&R 15mm Wheel Adapter Set To Fit E36/E46 Wheels To E39 5-series
 525, 528, 530, 540, M5 (E39) 		1997-2003 These special 15mm wheel spacers allow an E39 owner to use E36 or E46 wheels on their car. These spacers are the correct 74.0mm center-bore on the inside and 72.5mm center bore on the outside for the wheel to sit on. This spacer will reduce the wheel offset by 15mm. This difference in center bore has left a lot of E39 owners out in the cold when it came to wheel options (especially in the winter). H&R has worked up this easy solution. This is a DR spacer system - longer wheel bolts are required. The spacer fits between the hub and the wheel.

Note about E36 and E46 wheels – there is a large range in offsets on these wheels. The lowest offset we have seen is 35mm; the highest offset is 49mm. The desired offset for the E39 is 20mm, depending on wheel width. H&R makes these wheel adapters in 15mm and 20mm thicknesses. If your E36/E46 wheel is above 43mm in offset, you will run into the problem of the wheel tucked in too far. When looking at E36/E46 wheels, try to stay in the 35-43mm offset range.

Spacers are sold in pairs (1 axle).

Applications
1997-2003 E39 5-series models - 525i, 528i, 530i, 540, M5, including Touring.
 		$149.95

larger 		H&R 20mm Wheel Adapter Set To Fit E36/E46 Wheels To E39 5-series
 525, 528, 530, 540, M5 (E39) 		1997-2003 These special 20mm wheel spacers allow an E39 owner to use E36 or E46 wheels on their car. These spacers are the correct 74.0mm center-bore on the inside and 72.5mm center bore on the outside for the wheel to sit on. This spacer will reduce the wheel offset by 20mm. This difference in center bore has left a lot of E39 owners out in the cold when it came to wheel options (especially in the winter). H&R has worked up this easy solution. This is a DRA spacer system - the spacer bolts to the hub with special bolts; your wheel then bolts to the spacer.

Note about E36 and E46 wheels – there is a large range in offsets on these wheels. The lowest offset we have seen is 35mm; the highest offset is 49mm. The desired offset for the E39 is 20mm, depending on wheel width. H&R makes these wheel adapters in 15mm and 20mm thicknesses. If your E36/E46 wheel is above 43mm in offset, you will run into the problem of the wheel tucked in too far. When looking at E36/E46 wheels, try to stay in the 35-43mm offset range.

Spacers are sold in pairs (1 axle).

Applications
1997-2003 E39 5-series models - 525i, 528i, 530i, 540, M5, including Touring.
 		$189.50

larger 		E39 5-series 5mm H&R Wheel Spacers (pair)
 525i 528i 530i 540i M5 (E39) 		1997-2003 1997-2003 5-series; 5mm* = .2"; longer wheel bolts are required, see below!

These 5mm wheel spacers can be used on any 1997-2003 BMW 5 series, including 525i, 528i, 530i, 540i & E39 M5.

*5mm Spacers require you have a flush mounting surface on your wheels.
Wheels with a beveled mounting surface are not compatible with these spacers. If you have beveled wheels and wish to run a 5mm spacer on the front, you can use the TMS Hub Extender kit (front only!) See link below.

 		$49.95

larger 		E39 5-series 30mm H&R Wheel Spacers (pair)
 525i/528i/530i/540i/ (E39) 		1997-2004 30mm = 1.18"; wheel bolts are included $179.95

larger 		E39 5 Series 10mm H&R Wheel Spacer (Pair)
 525i/528i/530i/540i/M5 (E39) 		1997-2004 E39 5 Series 10mm H&R Wheel Spacer. (1 pair); longer wheel bolts are required, see below! $95.00

larger 		E39 5-series 15mm H&R Wheel Spacers (pair)
 525i/528i/530i/540i/M5 (E39) 		1997-2004 15mm = .59"; longer wheel bolts are required, see below! $95.95

larger 		E39 5-series 20mm H&R Wheel Spacers (pair)
 525i/528i/530i/540i/M5 (E39) 		1997-2004 20mm = .78"; longer wheel bolts required, see below! $99.95

larger 		E39 5-series 25mm H&R Wheel Spacers (pair)
 525i/528i/530i/540i/M5 (E39) 		1997-2004 25mm = .98"; wheel bolts are included $149.95

larger 		X5 25mm H&R Wheel Spacers (Pair)
 X5 (E53) 		1999-2006 E53 X5 25mm H&R Wheel Spacers in 25mm thickness. Fits between the back of the wheel and your car's hub. Made in Germany with TUV approval. Bolts directly to the hub. One pair and 10 mounting bolts are included (the spacer bolts to the hub and the wheel is bolted to the spacer). $149.95

larger 		X5 30mm H&R Spacers (Pair)
 X5 (E53) 		1999-2006 E53 X5 30mm H&R Wheel Spacers in 30mm thickness. Fits between the back of the wheel and your car's hub. Made in Germany with TUV approval. Bolts directly to the hub. One pair and 10 mounting bolts are included (the spacer bolts to the hub and the wheel is bolted to the spacer). $179.95

larger 		H&R 15mm Wheel Spacers and Bolts for BMW E70 X5, E71 X6 (Pair)
 X5, X6 (E70 E71) 		2007-- 15mm = .59"
A spacer package setup specifically for the 2007-later E70 X5 and E71 X6 (non M models). Each spacer is 15mm and fits on your car's existing hub. The wheel bolts to the hub with longer wheel bolts (included!). Made in Germany and TUV approved. Sold as a pair of spacers with 10 bolts.

Applications:
2007-up BMW E70 X5 3.0si, X5 3.5d, X5 4.8i (does not fit X5 M)
2007-up BMW E71 X6 35iX, X6 50iX (does not fit X6 M)
 		$139.50

larger 		H&R 25mm Wheel Spacers and Bolts for BMW E70 X5, E71 X6 (Pair)
 X5, X6 (E70 E71) 		2007-- 25mm = 1.0"
A spacer package setup specifically for the 2007-later E70 X5 and E71 X6 (non M models). Each spacer is 25mm and fits on your car's existing hub. The spacer bolts to the hub with special mounting bolts. The wheel then bolts to the spacer with the stock lub bolts. Made in Germany and TUV approved. Sold as a pair of spacers with 10 mounting bolts.

Applications:
2007-up BMW E70 X5 3.0si, X5 3.5d, X5 4.8i (does not fit X5 M)
2007-up BMW E71 X6 35iX, X6 50iX (does not fit X6 M)
 		$149.95

larger 		H&R 30mm Wheel Spacers and Bolts for BMW E70 X5, E71 X6 (Pair)
 X5, X6 (E70 E71) 		2007-- 30mm = 1.18"
A spacer package setup specifically for the 2007-later E70 X5 and E71 X6 (non M models). Each spacer is 30mm and fits on your car's existing hub. The spacer bolts to the hub with special mounting bolts. The wheel then bolts to the spacer with the stock lub bolts. Made in Germany and TUV approved. Sold as a pair of spacers with 10 mounting bolts.

Applications:
2007-up BMW E70 X5 3.0si, X5 3.5d, X5 4.8i (does not fit X5 M)
2007-up BMW E71 X6 35iX, X6 50iX (does not fit X6 M)
 		$179.95

larger 		H&R 20mm Wheel Spacers and Bolts for BMW E70 X5, E71 X6 (Pair)
 X5, X6 (E70 E71) 		2007-- 20mm = .78"
A spacer package setup specifically for the 2007-later E70 X5 and E71 X6 (non M models). Each spacer is 20mm and fits on your car's existing hub. The wheel bolts to the hub with longer wheel bolts (included!). Made in Germany and TUV approved. Sold as a pair of spacers with 10 bolts.

Applications:
2007-up BMW E70 X5 3.0si, X5 3.5d, X5 4.8i (does not fit X5 M)
2007-up BMW E71 X6 35iX, X6 50iX (does not fit X6 M)
 		$144.45

larger 		H&R 5mm Wheel Spacers and Bolts for BMW E70 X5, E71 X6 (Pair)
 X5, X6 (E70 E71) 		2007-- 5mm = .20"
A spacer package setup specifically for the 2007-later E70 X5 and E71 X6 (non M models). Each spacer is 5mm and fits on your car's existing hub. The wheel bolts to the hub with longer wheel bolts (included!). Made in Germany and TUV approved. Sold as a pair of spacers with bolts.

Applications:
2007-up BMW E70 X5 3.0si, X5 3.5d, X5 4.8i (does not fit X5 M)
2007-up BMW E71 X6 35iX, X6 50iX (does not fit X6 M)
 		$94.45

larger 		H&R 12mm Wheel Spacers and Bolts for BMW E70 X5, E71 X6 (Pair)
 X5, X6 (E70 E71) 		2007-- 12mm = .47"
A spacer package setup specifically for the 2007-later E70 X5 and E71 X6 (non M models). Each spacer is 12mm and fits on your car's existing hub. The wheel bolts to the hub with longer wheel bolts (included!). Made in Germany and TUV approved. Sold as a pair of spacers with 10 bolts.

Applications:
2007-up BMW E70 X5 3.0si, X5 3.5d, X5 4.8i (does not fit X5 M)
2007-up BMW E71 X6 35iX, X6 50iX (does not fit X6 M)
 		$139.50

larger 		MINI 25mm 4/100 H&R Wheel Spacer Set
 Cooper, Cooper S (MINI) 		2002-2005 MINI 4-lug aluminum alloy wheel spacers in 25mm thickness. Fits between the back of the wheel and your car's hub. Made in Germany with TUV approval. Bolts directly to the hub. Bolts are included. $149.95

larger 		MINI 30mm 4/100 H&R Wheel Spacer Set
 Cooper, Cooper S (MINI) 		2002-2005 MINI 4-lug aluminum alloy wheel spacers in 30mm thickness. Fits between the back of the wheel and your car's hub. Made in Germany with TUV approval. Bolts directly to the hub. Bolts are included. $179.95

larger 		MINI 5mm 4/100 H&R Wheel Spacer Set
 Cooper, Cooper S (MINI) 		2002-2010 MINI 4-lug aluminum alloy wheel spacers in 5mm thickness. Fits between the back of the wheel and your car's hub. Made in Germany with TUV approval. Bolts are extra. Longer wheel bolt required! $49.95

larger 		MINI 15mm 4/100 H&R Wheel Spacer Set
 Cooper, Cooper S (MINI) 		2002-2010 MINI 4-lug aluminum alloy wheel spacers in 15mm thickness. Fits between the back of the wheel and your car's hub. Made in Germany with TUV approval. Bolts are extra. Longer wheel bolt required! $95.00

larger 		MINI 20mm 4/100 H&R Wheel Spacer Set
 Cooper, Cooper S (MINI) 		2002-2010 MINI 4-lug aluminum alloy wheel spacers in 5mm thickness. Fits between the back of the wheel and your car's hub. Made in Germany with TUV approval. Bolts are extra. Longer wheel bolt required! $99.95

 

Copyright © 2010 Turner Motorsport Inc.
info@turnermotorsport.com
 www.allshocks.com
www.allsprings.com		 Terms and Conditions
Privacy Policy