Turner Motorsport Stett Performance Charge Pipe with Dual Diverter Valves - E9x 335i/xi, E82 135i with N54 engine SPEE82E92DDV

Stett Performance Charge Pipe with Dual Diverter Valves - E9x 335i/xi, E82 135i with N54 engine

The factory plastic charge pipe and diverter valves are prone to leaking under stock boost levels, increasing boost only makes this problem worse. The stock diverter valves are not designed internally to handle added boost pressure. They can fail under load which will actually cause boost bleed off when you don't want it causing boost spikes and loss of horsepower. The STETT Performance 135i/335i charge pipe is made from 100% 304 stainless steel and designed to handle higher than stock boost levels without leaking thanks to it's very strong design, ultra high quality materials and our patent pending throttle body connector that forms an ultra tight seal and prevents the charge pipe from blowing off as is so common with other products on the market. The factory plastic piece begins to leak on even stock level boost. Simply using a standard silicone hose connector to connect an aftermarket pipe leaves a high chance the pipe will blow off the engine. We, however, developed a patent pending 4 ply, double layer hose connector to the throttle body which is far superior to anything else on the market including the factory flimsy o-ring and lock clip. Each kit comes with everything you need for installation including the dual billet aluminum diverter valves from Forge, one of the most respected names in the industry. Each pipe comes standard with dual stainless meth bungs.

  • Made in the U.S.A.
  • 304 stainless steel replaces factory plastic
  • Ultra high quality and strong materials
  • Eliminate leaks caused by weak factory connections
  • Get back horsepower lost from weak factory diverter valves
  • Our patent pending hose connector eliminates pipe from blowing off engine under load
  • Dual stainless Meth bungs
  • Extreme Duty silicone hoses
  • High strength stainless hardware

    This item fits the following BMWs:
    2008-2010 E82 BMW 135i
    2011-2012 E82 BMW 1M Coupe
    2006-2010 E90 BMW 335i 335xi 335i xDrive - Sedan
    2007-2010 E92 BMW 335i 335xi 335i xDrive - Coupe
    2007-2010 E93 BMW 335i - Convertible
    2011-2012 E92 BMW 335is - Coupe
    2011-2012 E93 BMW 335is - Convertible
    • Turner Motorsport Turner Motorsport
    T#: 11527 | Part#: SPEE82E92DDV
    affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
    Qty
    Turner Motorsport Stett Performance Charge Pipe with Dual Diverter Valves - E9x 335i/xi, E82 135i with N54 engine SPEE82E92DDV
    Stett Performance Charge Pipe with Dual Diverter Valves - E9x 335i/xi, E82 135i with N54 engine
    The factory plastic charge pipe and diverter valves are prone to leaking under stock boost levels, increasing boost only makes this problem worse. The stock diverter valves are not designed internally to handle added boost pressure. They can fail under load which will actually cause boost bleed off when you don't want it causing boost spikes and loss of horsepower. The STETT Performance 135i/335i charge pipe is made from 100% 304 stainless steel and designed to handle higher than stock boost levels without leaking thanks to it's very strong design, ultra high quality materials and our patent pending throttle body connector that forms an ultra tight seal and prevents the charge pipe from blowing off as is so common with other products on the market. The factory plastic piece begins to leak on even stock level boost. Simply using a standard silicone hose connector to connect an aftermarket pipe leaves a high chance the pipe will blow off the engine. We, however, developed a patent pending 4 ply, double layer hose connector to the throttle body which is far superior to anything else on the market including the factory flimsy o-ring and lock clip. Each kit comes with everything you need for installation including the dual billet aluminum diverter valves from Forge, one of the most respected names in the industry. Each pipe comes standard with dual stainless meth bungs.

  • Made in the U.S.A.
  • 304 stainless steel replaces factory plastic
  • Ultra high quality and strong materials
  • Eliminate leaks caused by weak factory connections
  • Get back horsepower lost from weak factory diverter valves
  • Our patent pending hose connector eliminates pipe from blowing off engine under load
  • Dual stainless Meth bungs
  • Extreme Duty silicone hoses
  • High strength stainless hardware

    This item fits the following BMWs:
    2008-2010 E82 BMW 135i
    2011-2012 E82 BMW 1M Coupe
    2006-2010 E90 BMW 335i 335xi 335i xDrive - Sedan
    2007-2010 E92 BMW 335i 335xi 335i xDrive - Coupe
    2007-2010 E93 BMW 335i - Convertible
    2011-2012 E92 BMW 335is - Coupe
    2011-2012 E93 BMW 335is - Convertible

    Prop 65 WarningProp 65 Warning

    • Cross Reference
    • SPEE82E92DDV
    Qty Description T# Part# Lifetime

    Product Q&A

    Lifetime Replacement

    This product is not eligible for Lifetime Replacement