Free Shipping on orders $99 and up! Some exclusions apply. Contiguous US only.

E10 D Force Flow Formed Alloy Wheels

E10 D Force Flow Formed Alloy Wheels D-Force Wheels has been one of the leading innovators in flow-formed alloy wheels for the BMW market. These wheels use a special manufacturing process that is a cross between forging and casting. Flow-forming is a process that results in a stronger wheel than the traditional casting process and less weight than a traditional forged wheel. Many high-quality and OEM wheel manufacturers are moving to this flow forming process. D-Force first gained credibility and fame with BMW CCA Club Racers throughout North America. A light weight, strong, and affordable race wheel proved to be a winning combination. D-Force Wheels are available in two distinct styles: LTW5 - light weight 5-spoke in 17" and 18" sizes and EmPower - light weight multi-spoke 'mesh' style wheel in an 18" size. For wheel information in general, check out our Wheel Tech Guide by clicking here.

LTW5 EmPower
You're currently viewing parts for your (E10) 1600-2002 / tii. Reset your chassis
For accurate results, specify your model below.
D-Force LTW5 15x7.0

Wheel Specs

Fitment:Front / Rear

Size:15x7.0"

Offset (mm):25

Weight (lbs):13

Profile:Flat

 

LTW5 wheels are some of the strongest and lightest wheels you can find for your BMW. It's no wonder that you'll find so many cars at track events with LTW5 wheels. Through advanced engineering and manufacturing methods D Force has created a lightweight wheel that can also withstand the stresses and rigors of a racetrack. D-Force were pioneers in the flow-forming casting technology that results in wheel stronger and lighter than other cast wheels. LTW5 wheels are typically over 10lbs lighter than a factory BMW wheel! With less weight the car is able to accelerate faster, the brakes are more responsive, and the suspension can react quicker which is especially helpful in transitions and autocross. The LTW5 style uses a classic 5-spoke design with clean simple good looks and generous sizing for big brakes. They're also easy to clean! Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack.

These D-Force wheels use the BMW 4-lug 4/100 bolt pattern and with a 57.1mm center bore. These wheels fit the E30 318/325 models as well as other vintage BMWs that use the 4/100 bolt pattern. Because they are light weight and very strong, this wheel is very popular wheel among the racing crowd. Used on many SpecE30 racecars.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For additional resources on wheel fitments, refer to our Wheel Guide page (http://www.turnermotorsport.com/t-wheel_guide.aspx) or give us a call or e-mail.

Sold per wheel.

Applications:
1984-1991 E30 3 Series 318i, 318is, 318ic, 325, 325e, 325i, 325is & 325ic
1977-1983 E21 3 Series 320i, 320i/6, 323i
1969-1976 1600 / 2002 / 2002tii 

D-Force Wheels
Part #: LTW515X7
Price: $115.00 (USD) 
Direct Ship
Quantity:   
D-Force LTW5 15x7.0
Wheel Specs
Fitment:Front / Rear
Size:15x7.0"
Offset (mm):25
Weight (lbs):13
Profile:Flat

LTW5 wheels are some of the strongest and lightest wheels you can find for your BMW. It's no wonder that you'll find so many cars at track events with LTW5 wheels. Through advanced engineering and manufacturing methods D Force has created a lightweight wheel that can also withstand the stresses and rigors of a racetrack. D-Force were pioneers in the flow-forming casting technology that results in wheel stronger and lighter than other cast wheels. LTW5 wheels are typically over 10lbs lighter than a factory BMW wheel! With less weight the car is able to accelerate faster, the brakes are more responsive, and the suspension can react quicker which is especially helpful in transitions and autocross. The LTW5 style uses a classic 5-spoke design with clean simple good looks and generous sizing for big brakes. They're also easy to clean! Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack.

These D-Force wheels use the BMW 4-lug 4/100 bolt pattern and with a 57.1mm center bore. These wheels fit the E30 318/325 models as well as other vintage BMWs that use the 4/100 bolt pattern. Because they are light weight and very strong, this wheel is very popular wheel among the racing crowd. Used on many SpecE30 racecars.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For additional resources on wheel fitments, refer to our Wheel Guide page (http://www.turnermotorsport.com/t-wheel_guide.aspx) or give us a call or e-mail.

Sold per wheel.

Applications:
1984-1991 E30 3 Series 318i, 318is, 318ic, 325, 325e, 325i, 325is & 325ic
1977-1983 E21 3 Series 320i, 320i/6, 323i
1969-1976 1600 / 2002 / 2002tii
D-Force Wheels
Part #: LTW515X7-A-ET25
Price: $115.00 (USD) 
Direct Ship
Quantity:   
D-Force LTW5 15x7.0
Wheel Specs
Fitment:Front / Rear
Size:15x7.0"
Offset (mm):25
Weight (lbs):13
Profile:Flat

LTW5 wheels are some of the strongest and lightest wheels you can find for your BMW. It's no wonder that you'll find so many cars at track events with LTW5 wheels. Through advanced engineering and manufacturing methods D Force has created a lightweight wheel that can also withstand the stresses and rigors of a racetrack. D-Force were pioneers in the flow-forming casting technology that results in wheel stronger and lighter than other cast wheels. LTW5 wheels are typically over 10lbs lighter than a factory BMW wheel! With less weight the car is able to accelerate faster, the brakes are more responsive, and the suspension can react quicker which is especially helpful in transitions and autocross. The LTW5 style uses a classic 5-spoke design with clean simple good looks and generous sizing for big brakes. They're also easy to clean! Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack.

These D-Force wheels use the BMW 4-lug 4/100 bolt pattern and with a 57.1mm center bore. These wheels fit the E30 318/325 models as well as other vintage BMWs that use the 4/100 bolt pattern. Because they are light weight and very strong, this wheel is very popular wheel among the racing crowd. Used on many SpecE30 racecars.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For additional resources on wheel fitments, refer to our Wheel Guide page (http://www.turnermotorsport.com/t-wheel_guide.aspx) or give us a call or e-mail.

Sold per wheel.

Applications:
1984-1991 E30 3 Series 318i, 318is, 318ic, 325, 325e, 325i, 325is & 325ic
1977-1983 E21 3 Series 320i, 320i/6, 323i
1969-1976 1600 / 2002 / 2002tii
D-Force Wheels
Part #: LTW515X7-FB-ET25
Price: $115.00 (USD) 
Back Ordered, Contact Us
Quantity: