Free Shipping on orders $99 and up! Some exclusions apply. Contiguous US only.

BMW E12 528i Seat Belts and Racing Harnesses

BMW E12 528i Seat Belts and Racing Harnesses The advantage of racing harnesses cannot be understated. Aside from the obvious improvement to your safety, harnesses keep your body planted in the seat and allow a much more confident and focused driving experience. Without your body strapped in you're constantly fighting to keep youself planted in the seat and these forces distract you from controlling the car. It also prevents you from getting and maintaining the ideal leverage point for working the steering wheel and pedals. Turner Motorsports offers several harness and seat belt accessories to make the use of harness belts easier.
You're currently viewing parts for your (E12) 528i 1977-1981. Reset your chassis
For accurate results, specify your model below.
Takata 6-Point Conversion Sub Strap for Race 4 Harness - Green

In the early days of racing, every organization from Nascar to Formula 1 had very loose rules on safety harnesses and equipment. In 1964, Takata saw a need to prevent the rampant injures that were occurring in motorsports and introduced their first full-harness seat belt system in the Subaru 360 that participated in the second Japanese Grand Prix. Ever since, Takata has continued to develop racing harness systems for automotive teams across the globe, perfecting their systems for safety and comfort. Already being a prominent name in the JDM racing scene and working with many professional teams around the world, the opening of the Takata Racing European division in Germany only further bolstered their name and reputation among numerous racing teams and organizations thanks to increased production, great value, and public availability.

If you are looking to upgrade your Race 4 4-point harness into a 6-point harness, then all you need is Takata's conversion sub strap. It features two 2-inch straps that are mounted to one T-bar on one end and a Snap-On bracket on each strap's other end. The T-bar is low-profile for comfort and ease of use and the Snap-On brackets allow the straps to be mounted to eye bolt mounts. This sub strap is FIA approved to accompany the FIA approval of your Race 4 racing harness.

Takata
Part #: 79000US-H2
Price: $95.00 (USD) 
Ships in 9 days
Quantity:   
RaceQuip 2

RaceQuip recommends using their superior hardware and mounting options for alternative mounting methods to ensure that the hardware will hold up to the demands in an accident. All of there hardware and brackets are constructed from drop-forged steel and are cadmium plated for strength and corrosion resistance.

This bracket attaches the harness to the vehicle via a mounting bolt.

Racequip
Part #: 700010
Price: $4.95 (USD) 
Direct Ship
Quantity:   
Takata Racing Drift 3

In the early days of racing, every organization from Nascar to Formula 1 had very loose rules on safety harnesses and equipment. In 1964, Takata saw a need to prevent the rampant injures that were occurring in motorsports and introduced their first full-harness seat belt system in the Subaru 360 that participated in the second Japanese Grand Prix. Ever since, Takata has continued to develop racing harness systems for automotive teams across the globe, perfecting their systems for safety and comfort. Already being a prominent name in the JDM racing scene and working with many professional teams around the world, the opening of the Takata Racing European division in Germany only further bolstered their name and reputation among numerous racing teams and organizations thanks to increased production, great value, and public availability.

The Takata DRIFT Series of belts, manufactured by Takata Racing in Germany, are uniquely designed for safe installation in passenger cars with factory seats. The belts meet both FMVSS (US) & ECE (European) standards for "Street Legal" use. Both belts incorporate Takata ASM® technology and bendable stainless steel mounting hardware allowing installation to factory seat belt mounting points without effecting the operation of factory seat belts. Takata DRIFT belts set new standard style and safety of aftermarket, Street Legal belts. DRIFT belts come in both Takata Green and Black to match any interior scheme with style!

The Bolt-On version generally bolts to the existing factory mounting points for the front lap belts. The shoulder belts generally mount either to the rear lap belt mounting points OR they can be wrapped directly to a roll-cage or harness bar.

The lap belt Bolt-On attachments brackets are sewn into the lap belts. The shoulder belt attachment brackets can be removed allowing you to wrap the shoulder belts to a harnessbar or rollbar using the 3-bar adjusters provided.

Features and Specifications:

  • Street Oriented 4 point harness
  • 3" Shoulders, 2" Lap belts
  • Street Legal (ECE R 16 and FMVSS 209 - Legal for use as the primary restraint in a road-going vehicle)
  • Bolt-in hardware
  • Available in Green or Black
  • Buckle on right lap belt
Takata
Part #: 70003US-0
Price: $305.00 (USD) 
Ships in 9 days
Quantity:   
Takata Mounting Reinforcement Plate for Racing Harnesses

Reinforcing a harness mount point is essential when the location has not been engineered by the auto manufacturer. Any time you mount a harness to sheet metal, you will need to put a reinforcement plate under it to keep it from ripping out of the floor.

Specs:

  • Plate: 80 mm x 50 mm x 3 mm with welded 7/16" nut
  • Use with Eye-bolts and/or 7/16" Bolt-In hardware
Takata
Part #: SG39
Price: $4.50 (USD) 
Ships in 9 days
Quantity:   
RaceQuip 3

RaceQuip recommends using their superior hardware and mounting options for alternative mounting methods to ensure that the hardware will hold up to the demands in an accident. All of there hardware and brackets are constructed from drop-forged steel and are cadmium plated for strength and corrosion resistance.

This bracket attaches the harness to the vehicle via a mounting bolt.

Racequip
Part #: 700020
Price: $5.95 (USD) 
Direct Ship
Quantity:   
Takata Racing Drift 2

In the early days of racing, every organization from Nascar to Formula 1 had very loose rules on safety harnesses and equipment. In 1964, Takata saw a need to prevent the rampant injures that were occurring in motorsports and introduced their first full-harness seat belt system in the Subaru 360 that participated in the second Japanese Grand Prix. Ever since, Takata has continued to develop racing harness systems for automotive teams across the globe, perfecting their systems for safety and comfort. Already being a prominent name in the JDM racing scene and working with many professional teams around the world, the opening of the Takata Racing European division in Germany only further bolstered their name and reputation among numerous racing teams and organizations thanks to increased production, great value, and public availability.

The Takata DRIFT Series of belts, manufactured by Takata Racing in Germany, are uniquely designed for safe installation in passenger cars with factory seats. The belts meet both FMVSS (US) & ECE (European) standards for "Street Legal" use. Both belts incorporate Takata ASM® technology and bendable stainless steel mounting hardware allowing installation to factory seat belt mounting points without effecting the operation of factory seat belts. Takata DRIFT belts set new standard style and safety of aftermarket, Street Legal belts. DRIFT belts come in both Takata Green and Black to match any interior scheme with style!

The Bolt-On version generally bolts to the existing factory mounting points for the front lap belts. The shoulder belts generally mount either to the rear lap belt mounting points OR they can be wrapped directly to a roll-cage or harness bar.

The lap belt Bolt-On attachments brackets are sewn into the lap belts. The shoulder belt attachment brackets can be removed allowing you to wrap the shoulder belts to a harnessbar or rollbar using the 3-bar adjusters provided.

Features and Specifications:

  • Street Oriented 4 point harness
  • 2" Shoulders, 2" Lap belts
  • Street Legal (ECE R 16 and FMVSS 209 - Legal for use as the primary restraint in a road-going vehicle)
  • Bolt-in hardware
  • Available in Green or Black
  • Buckle on right lap belt
Takata
Part #: 74001US-H2
Price: $199.00 (USD) 
Ships in 9 days
Free Shipping Free Shipping
Quantity:   
Takata Racing

In the early days of racing, every organization from Nascar to Formula 1 had very loose rules on safety harnesses and equipment. In 1964, Takata saw a need to prevent the rampant injures that were occurring in motorsports and introduced their first full-harness seat belt system in the Subaru 360 that participated in the second Japanese Grand Prix. Ever since, Takata has continued to develop racing harness systems for automotive teams across the globe, perfecting their systems for safety and comfort. Already being a prominent name in the JDM racing scene and working with many professional teams around the world, the opening of the Takata Racing European division in Germany only further bolstered their name and reputation among numerous racing teams and organizations thanks to increased production, great value, and public availability.

The RACE 4 is the benchmark harness for Track Day/Drift/Show cars. This true racing harness comes with FIA approval, and the exclusive TAKATA aluminum multi-point release cam-lock buckle. Additional features include asmTM system to prevent submarining, 3" shoulder belts, and 2" lap belts.

The Bolt-On version features specialized bendable stainless steel bolt-on brackets (see image) designed to bolt to the stock vehicle seat belt mounting points along with your factory seat belts. The brackets can be pre-bent to optimize installation and to maintain the proper load path of the seat belt under load.

The lap belt Bolt-On attachment brackets are sewn into the lap belts. The shoulder belt attachment brackets are wrapped in and can be removed allowing you to wrap the shoulder belts to a harnessbar or rollbar using the 3-bar adjusters provided.

Features and Specifications:

  • 4-point belt Racing-oriented belt
  • ASM (Anti-Submarining) Technology
  • 3" Shoulder belt, 2" Lap (Pull Up)
  • Buckle on right lap belt
  • Central Camlock
  • Option for added Anti-Sub Strap (creating a 6-point belt)
  • FIA Approved

*Does not meet US FMVSS 209 requirement for a single red/orange push button release for street legal use.

Takata
Part #: 71001US-H2
Price: $375.00 (USD) 
Ships in 9 days
Quantity:   
Takata Racing Drift 3

In the early days of racing, every organization from Nascar to Formula 1 had very loose rules on safety harnesses and equipment. In 1964, Takata saw a need to prevent the rampant injures that were occurring in motorsports and introduced their first full-harness seat belt system in the Subaru 360 that participated in the second Japanese Grand Prix. Ever since, Takata has continued to develop racing harness systems for automotive teams across the globe, perfecting their systems for safety and comfort. Already being a prominent name in the JDM racing scene and working with many professional teams around the world, the opening of the Takata Racing European division in Germany only further bolstered their name and reputation among numerous racing teams and organizations thanks to increased production, great value, and public availability.

The Takata DRIFT Series of belts, manufactured by Takata Racing in Germany, are uniquely designed for safe installation in passenger cars with factory seats. The belts meet both FMVSS (US) & ECE (European) standards for "Street Legal" use. Both belts incorporate Takata ASM® technology and bendable stainless steel mounting hardware allowing installation to factory seat belt mounting points without effecting the operation of factory seat belts. Takata DRIFT belts set new standard style and safety of aftermarket, Street Legal belts. DRIFT belts come in both Takata Green and Black to match any interior scheme with style!

The lap belt Snap-On attachments brackets are sewn into the lap belts. The shoulder belt attachment brackets can be removed allowing you to wrap the shoulder belts to a harnessbar or rollbar using the 3-bar adjusters provided. The Snap-On version is designed to be attached to eye bolts at the lap belts.

Features and Specifications:

  • Street Oriented 4 point harness
  • 3" Shoulders, 2" Lap belts with Pull-up adjusters
  • Street Legal (ECE R 16 and FMVSS 209 - Legal for use as the primary restraint in a road-going vehicle)
  • Snap-on hardware
  • Available in Green or Black
  • Buckle on right lap belt
Takata
Part #: 70002US-0
Price: $305.00 (USD) 
Ships in 9 days
Quantity:   
Takata 7/16 These Eye bolts are designed to work perfectly with the B14 Snap On Brackets.
Takata
Part #: SG23
Price: $3.50 (USD) 
Ships in 9 days
Quantity:   
Takata 2 Constructed of high quality comfort foam and wrapped in Dinamica micro-fiber suede, this comfort pad prevents the seat belt or harness strap from making you uncomfortable when strapped in for extended periods of time. Each pad fits easily onto a 2 inch strap by opening from a side zipper and slipping over top the strap. The bottom of the strap also has an extension of material to further protect below the shoulderbelt adjust. These pads are available in two colors: Black and Green.
Takata
Part #: 78011-0
Price: $89.00 (USD) 
Ships in 9 days
Quantity:   
Takata
Part #: SG11
Price: $0.75 (USD) 
Ships in 9 days
Quantity:   
BMW Motorsport Seat Belt Shoulder Pad Set These original BMW Motorsport shoulder pads fit over any street car seat belt or 2" harness belt. A zippered side makes these super easy to install on any car. High quality "BMW MOTORSPORT" embroidery will set your car apart from the rest. Also available in 76mm (3") harness width. Set includes two shoulder pads.
Genuine BMW
Part #: MSBELT50MM
Price: $99.95 (USD) 
In Stock
Free Shipping Free Shipping
RaceQuip 2

RaceQuip recommends using their superior hardware and mounting options for alternative mounting methods to ensure that the hardware will hold up to the demands in an accident. All of there hardware and brackets are constructed from drop-forged steel and are cadmium plated for strength and corrosion resistance.

This 3-Bar Slide Mount connects and secures the harness to the harness bracket or rollbar.

Racequip
Part #: 700085
Price: $4.95 (USD) 
Direct Ship
Quantity:   
RaceQuip 3

RaceQuip recommends using their superior hardware and mounting options for alternative mounting methods to ensure that the hardware will hold up to the demands in an accident. All of there hardware and brackets are constructed from drop-forged steel and are cadmium plated for strength and corrosion resistance.

This bracket attaches the harness to the vehicle via an eyelet mounting bolt.

Racequip
Part #: 700040
Price: $6.95 (USD) 
Direct Ship
Quantity:   
Race-Quip Black Racing Harness Pads

RaceQuip harness pads are made with flame retardant foam, covered with fire retardant Pyrovatex® and feature easy on/easy off hook and loop attachment. Designed for use with both 2" and 3" wide belts.  Available in black only.

Features:

  • Made with Flame Retardant Foam Padding
  • Features an Pyrovatex® FRC Cover with Hook and Loop Closure
  • Designed to Add Comfort When Using 2" or 3” Wide Belts
  • Available in Black Only
     
Racequip
Part #: 767001
Price: $14.95 (USD) 
Direct Ship
Quantity:   
RaceQuip FIA/SFI Approved Camlock Black Racing Harness Set

RaceQuip FIA Camlock Harness Sets feature an ultra-lightweight magnesium alloy cam buckle with an activation lever that points downward. The FIA cam buckle utilizes a wide engagement cone for easy snap-in. A 45˚(right or left) unlatch movement prevents accidental opening and precise spring pressure provides a positive feel. All RaceQuip FIA Approved belts are constructed using premium 3” Polyester webbing that is transverse mono filament woven to provide increased strength and smoother edges. Premium aluminum shoulder adjusters come standard on all RaceQuip FIA approved harness sets.

The RaceQuip 751 Series Camlock belt set offers many professional features yet affordable pricing for the grassroots racer. This Camlock belt set comes in a six (6) point configuration with a pull-down  lap belt design. The harness sets not only exceed the SFI 16.1 specification, they also pass the stringent FIA 8853/98 standard. This “dual certification” allows racers in some sanctions   (SCCA,  NASA, etc.) to use these belts for five years instead of just two.

They start with a super-lightweight 165 gram magnesium alloy cam buckle. The buckle features an engagement cone which allows the belts to snap into the cam mechanism at angles of 21˚ left or right and 11˚ up and down for ease of engagement. Precise internal spring pressure allows a positive feel on the 45˚ (right or left) unlatch movement that reduces the chance of accidental opening.

Next, the forged SAE 4130 steel buckle hardware is sewn onto the premium 3” polyester webbing, called “transverse mono filament woven”, which means that there are mono filament fibers inter-woven into the straps in a pattern that transverses the standard weave. This design accomplishes two tasks - added strength and smoother edges on the belts. The harness sets also feature premium, lightweight, non-slip aluminum shoulder adjusters with easy lift grips. The lap belt adjusters utilize an anti-slip tensioner device as well. Heavy-duty forged steel SAE 1050 3" slide bars and 3" bolt on ends come already installed, but they can be easily removed if you prefer to mount your belts by wrapping them around a rollbar or you can change them out to snap-hook ends. Belt adjustment lengths are 20” to 68” for shoulders and 20” to 68” for the lap belt.

Features and Specifications:

  • Lightweight 165 gram Magnesium Alloy Cam Buckle
  • Exceeds Stringent FIA 8853/98 Standard (FIA Tags Affixed)
  • Surpasses SFI 16.1 Rating (SFI Tags Affixed)
  • 6 Point Design - Dual 2" Crotch Strap
  • NOT D.O.T. / FMVSS Certified for On Highway Use
  • Pull Down Lap Belt Adjusters
  • Wide Engagement Cone For Easy Snap In
  • Precise Spring Pressure for a Positive Feel
  • 45° (right or left) Unlatch Movement Mitigates Accidental Opening
  • Cam Buckle Stays Affixed to the Right Lap Belt
  • Heavy-Duty Drop-Forged Steel Hardware Ends Installed (no bolts)
  • Wrap Around or Bolt-in Mounting
  • Premium 3” Polyester Webbing
  • Transverse Mono Filament Woven for Increased Strength and Smoother Edges
  • Premium Aluminum Shoulder Adjusters
  • Shoulder Belt Adjustment Length is 20" to 68"
  • Lap Belt is Adjustable from 20" to 68"
  • Can Be Re-Webbed (SFI Cert.) Upon Expiration
  • Available in Black Only
Racequip
Part #: 751001
Price: $199.95 (USD) 
Direct Ship
Quantity:   
Takata Wavy Washer Hardware - 7/16 Wavy washers are perfect for when using mounting plates with your racing harness. The washers apply tension to nuts and bolts, preventing them from backing out and becoming loose.
Takata
Part #: S3
Price: $0.15 (USD) 
Ships in 9 days
Quantity:   
Takata 2 Constructed of high quality comfort foam and wrapped in Dinamica micro-fiber suede, this comfort pad prevents the seat belt or harness strap from making you uncomfortable when strapped in for extended periods of time. Each pad fits easily onto a 2 inch strap by opening from a side zipper and slipping over top the strap. The bottom of the strap also has an extension of material to further protect below the shoulderbelt adjust. These pads are available in two colors: Black and Green.
Takata
Part #: 78011-H2
Price: $89.00 (USD) 
Ships in 9 days
Quantity:   
Takata 3 Constructed of high quality comfort foam and wrapped in Dinamica micro-fiber suede, this comfort pad prevents the seat belt or harness strap from making you uncomfortable when strapped in for extended periods of time. Each pad fits easily onto a 3 inch strap by opening from a side zipper and slipping over top the strap. The bottom of the strap also has an extension of material to further protect below the shoulderbelt adjust. These pads are available in two colors: Black and Green.
Takata
Part #: 78008-0
Price: $99.00 (USD) 
Ships in 9 days
Quantity:   
Takata
Part #: SG10
Price: $0.60 (USD) 
Ships in 9 days
Quantity:   
Takata Racing

In the early days of racing, every organization from Nascar to Formula 1 had very loose rules on safety harnesses and equipment. In 1964, Takata saw a need to prevent the rampant injures that were occurring in motorsports and introduced their first full-harness seat belt system in the Subaru 360 that participated in the second Japanese Grand Prix. Ever since, Takata has continued to develop racing harness systems for automotive teams across the globe, perfecting their systems for safety and comfort. Already being a prominent name in the JDM racing scene and working with many professional teams around the world, the opening of the Takata Racing European division in Germany only further bolstered their name and reputation among numerous racing teams and organizations thanks to increased production, great value, and public availability.

The RACE 4 is the benchmark harness for Track Day/Drift/Show cars. This true racing harness comes with FIA approval, and the exclusive TAKATA aluminum multi-point release cam-lock buckle. Additional features include asmTM system to prevent submarining, 3" shoulder belts, and 2" lap belts.

The Bolt-On version features specialized bendable stainless steel bolt-on brackets (see image) designed to bolt to the stock vehicle seat belt mounting points along with your factory seat belts. The brackets can be pre-bent to optimize installation and to maintain the proper load path of the seat belt under load.

The lap belt Bolt-On attachment brackets are sewn into the lap belts. The shoulder belt attachment brackets are wrapped in and can be removed allowing you to wrap the shoulder belts to a harnessbar or rollbar using the 3-bar adjusters provided.

Features and Specifications:

  • 4-point belt Racing-oriented belt
  • ASM (Anti-Submarining) Technology
  • 3" Shoulder belt, 2" Lap (Pull Up)
  • Buckle on right lap belt
  • Central Camlock
  • Option for added Anti-Sub Strap (creating a 6-point belt)
  • FIA Approved

*Does not meet US FMVSS 209 requirement for a single red/orange push button release for street legal use.

Takata
Part #: 71001US-0
Price: $375.00 (USD) 
Ships in 9 days
Quantity:   
OMP Air Cooling kit

OMP Air Cooling Kit that can be mounted to your "Air" compatible OMP racing seats. This kit directs forced air directly to the driver, keeping them cool during long races in very hot conditions. 

The kit includes: 
- a shell to be mounted on the the back of the seat with included shaped bihadesive tape (HC/913/G) 
- a connection hose (1,5" x 2mt) with inner metal spiral (HC/913/T) that can be fixed to the shell and to the blower HC/914 or to others air sources (inner intake of the car..) 
- a connection junction in rubber (HC/913/R) 
- 45° connection junction in rubber (HC/913/R45) 

All components are sold also separately as spare parts

**Air Blower (HC/914) sold separately.**

OMP
Part #: HC/913
Price: $299.00 (USD) 
Ships in 3 Days
Quantity:   
RaceQuip 2

RaceQuip recommends using their superior hardware and mounting options for alternative mounting methods to ensure that the hardware will hold up to the demands in an accident. All of there hardware and brackets are constructed from drop-forged steel and are cadmium plated for strength and corrosion resistance.

This bracket attaches the harness to the vehicle via an eyelet mounting bolt.

Racequip
Part #: 700030
Price: $5.95 (USD) 
Direct Ship
Quantity:   
Takata Racing

In the early days of racing, every organization from Nascar to Formula 1 had very loose rules on safety harnesses and equipment. In 1964, Takata saw a need to prevent the rampant injures that were occurring in motorsports and introduced their first full-harness seat belt system in the Subaru 360 that participated in the second Japanese Grand Prix. Ever since, Takata has continued to develop racing harness systems for automotive teams across the globe, perfecting their systems for safety and comfort. Already being a prominent name in the JDM racing scene and working with many professional teams around the world, the opening of the Takata Racing European division in Germany only further bolstered their name and reputation among numerous racing teams and organizations thanks to increased production, great value, and public availability.

The RACE 4 is the benchmark harness for Track Day/Drift/Show cars. This true racing harness comes with FIA approval, and the exclusive TAKATA aluminum multi-point release cam-lock buckle. Additional features include asmTM system to prevent submarining, 3" shoulder belts, and 2" lap belts with Pull-up adjusters.

The lap belt Snap-On attachment brackets are sewn into the lap belts. The shoulder belt attachment brackets are wrapped in and can be removed allowing you to wrap the shoulder belts to a harnessbar or rollbar using the 3-bar adjusters provided.

Features and Specifications:

  • 4-point belt Racing-oriented belt
  • ASM (Anti-Submarining) Technology
  • 3" Shoulder belt, 2" Lap (Pull Up)
  • Buckle on right lap belt
  • Central Camlock
  • Option for added Anti-Sub Strap (creating a 6-point belt)
  • FIA Approved

*Does not meet US FMVSS 209 requirement for a single red/orange push button release for street legal use.

Takata
Part #: 71000US-H2
Price: $375.00 (USD) 
Ships in 9 days
Quantity:   
Schroth Adjusting Grips - 2 Schroth harness grips slide into the ends of your Schroth harnesses and give your fingers something to lock onto when tightening the harness. Otherwise, your hand - or glove - has to yank on the end of the strap which might be slippery. Schroth Grips make life easier and pit stops quicker! An accessory that you really can't live without. Sold per harness for both shoulder and both lap belts (4 Grips total). Fits Schroth 2" harnesses only.
Schroth
Part #: SR00092
Price: $15.95 (USD) 
In Stock
Quantity:   
Schroth 2 Inch Harness Pads Cushioned pads that cover the 2" shoulder belts so they don't dig into your shoulders. These pads simply cover the belts and fasten with a zipper. Available in multiple colors with "Schroth" velour letters sewn on (flip the pad over if you don't want the logo showing). These can even be used on stock 3-point seatbelts to prevent the belt from rubbing against your neck. Sold as a pair of pads (enough to fit one racing harness).
Schroth
Part #: SC-2IN-PADS
Price: $31.95 (USD) 
Direct Ship
RaceQuip 7/16-20 Short Eyebolt Harness Mount Hardware

RaceQuip recommends using their superior hardware and mounting options for alternative mounting methods to ensure that the hardware will hold up to the demands in an accident. All of there hardware and brackets are constructed from drop-forged steel and are cadmium plated for strength and corrosion resistance.

This eyelet bolt attaches the harness bracket to the vehicle via the stock seat belt mounting location.

Racequip
Part #: 700050
Price: $4.95 (USD) 
Direct Ship
Quantity:   
Takata 3 This 3 Bar Slide is designed to be used to wrap any 3" webbing to a harness bar, or to wrap any end fitting into a 3" piece of webbing. This is the bracket found on all 3" shoulder belts
Takata
Part #: SRLV7
Price: $4.00 (USD) 
Ships in 9 days
Quantity:   

Schroth Rallye 4 Harness

Rallye harnesses are not Left/Right specific
Schroth Rallye 4 Harness

There are many benefits to installing harnesses in your BMW -

  • maintain a proper driving position
  • keep you planted in the seat and not bracing with your left leg or shoulder
  • lower lap times thanks to improved driver confidence
  • advanced technology is safer than standard 3-point belts

It's hard to put into words just how effective harnesses are in improving your driving experience. In addition to the obvious safety benefits, harnesses make you a better driver by removing distractions so your hands and feet are used for car control instead of bracing against a door panel or dead pedal. Everyone with harnesses will agree: they are a must-have upgrade to your driving experience and they wish they had installed them sooner.

The Rallye harnesses are Schroth's universal fit, bolt-in harness design that still meets DOT and TUV specs. The Rallye 4 harness fits most BMWs better than a Rallye 3 type thanks to its four mounting points that bolt to four existing anchor points in the BMW chassis: outboard lap belt anchor on B-pillar, inboard lap belt anchor on seat, and both rear seat belt anchors. The Rallye harnesses are a fixed, semi-permanent install but a quick-connect buckle is included in the rear seat harness so that the front and rear sections can be separated and tucked away when not in use. This also allows you to use the stock 3-point seatbelts in the front and rear seats without obstruction. All Schroth harnesses feature their asm technology that prevents your body from sliding under the lap belt and redces head and chest deceleration forces. Rallye belts are not side-specific; they fit either the Left or Right side of the vehicle.

Optional: Schroth Grips. Schroth harness grips slide into the ends of your Schroth harnesses and give your fingers something to lock onto when tightening the harness. Otherwise, your hand - or glove - has to yank on the end of the strap which might be slippery. Sold per harness for both shoulder and both lap belts (4 Grips total).

Seat Compatability: Schroth approves this harness only for stock seats or seats that have passed independent crash testing. The seat design must have a separate headrest and backrest. Single piece headrest and backrest (e.g. - F8X M3/M4 seats, Porsche 911 seats) are not approved because the shoulder straps fall to the sides and will not secure the driver properly. Observe all guidelines and instructions for installation and fitment.

E36 Fitment Note: a special bolt is required for installation on the stock E36 seat. Make sure you order this bolt for any E36 installations. Click here for the link to the bolt.

Rallye 4 Harness Summary:

  • Suggested Use:  autocross, daily driver
  • Shoulder Belt:  2" pull down
  • Lap Belt:  2" pull down
  • Buckle:  Rallye push button
  • Installation:  permanent bolt-in
  • Seat Compatability:  approved only for stock seats with headrest separated from backrest
  • HANS compatible?  No.

 

When using any racing harness in any environment - even normal street use - adhere to this advice: "all the way tight, all of the time". Never loosen or slacken the belts for comfort or convenience! A loose racing harness will not protect you.

Schroth
Part #: SR1610
Price: $189.95 (USD) 
Direct Ship
Takata Racing Drift 2

In the early days of racing, every organization from Nascar to Formula 1 had very loose rules on safety harnesses and equipment. In 1964, Takata saw a need to prevent the rampant injures that were occurring in motorsports and introduced their first full-harness seat belt system in the Subaru 360 that participated in the second Japanese Grand Prix. Ever since, Takata has continued to develop racing harness systems for automotive teams across the globe, perfecting their systems for safety and comfort. Already being a prominent name in the JDM racing scene and working with many professional teams around the world, the opening of the Takata Racing European division in Germany only further bolstered their name and reputation among numerous racing teams and organizations thanks to increased production, great value, and public availability.

The Takata DRIFT Series of belts, manufactured by Takata Racing in Germany, are uniquely designed for safe installation in passenger cars with factory seats. The belts meet both FMVSS (US) & ECE (European) standards for "Street Legal" use. Both belts incorporate Takata ASM® technology and bendable stainless steel mounting hardware allowing installation to factory seat belt mounting points without effecting the operation of factory seat belts. Takata DRIFT belts set new standard style and safety of aftermarket, Street Legal belts. DRIFT belts come in both Takata Green and Black to match any interior scheme with style!

The lap belt Snap-On attachments brackets are sewn into the lap belts. The shoulder belt attachment brackets can be removed allowing you to wrap the shoulder belts to a harnessbar or rollbar using the 3-bar adjusters provided. The Snap-On version is designed to be attached to eye bolts at the lap belts.

Features and Specifications:

  • Street Oriented 4 point harness
  • 2" Shoulders, 2" Lap belts with Pull-up adjusters
  • Street Legal (ECE R 16 and FMVSS 209 - Legal for use as the primary restraint in a road-going vehicle)
  • Snap-on hardware
  • Available in Green or Black
  • Buckle on right lap belt
Takata
Part #: 74000US-H2
Price: $199.00 (USD) 
Ships in 9 days
Quantity:   
Takata 2 This 3 Bar Slide is designed to be used to wrap any 2" webbing to a harness bar, or to wrap any end fitting into a 2" piece of webbing. This is the bracket found on all 2" shoulder belts
Takata
Part #: LV10.A
Price: $3.20 (USD) 
Ships in 9 days
Quantity:   
RaceQuip 5 Point Latch And Link HANS/HNR Racing Harness - SFI 16.1 Approved

Racing harnesses are required at any respectable track or strip, but they tend to run upwards of hundreds of dollars. RaceQuip designs and builds safety equipment for just this issue! Since 1975, RaceQuip has been building some of the highest quality racing safety gear on the market. Their high quality and low cost safety gear is the result of wanting to provide "The Best Value in Safety", that keeps drivers safe without draining their wallet.

The HANS/HNR harness set has narrow shoulder belts to better fit a head & neck restraint (HNR) like a HANS device.

All harness systems are constructed using drop-forged steel hardware for ultimate strength and reduced weight. All hardware is cadmium plated for added protection. They use only 3" premium polyester webbing and all belts are box-x pattern sewn to ensure uniform stitch length and strength. Belts and hardware are routinely tested to verify compliance with SFI 16.1 standards.

All of their  harness sets feature a latch & link system to retain the belts. The latch & link system is distinguished by a pivoting "hammer," called a Duckbill, which locks all of the belts into place by snapping down into a detent. Both shoulder belts and the sub belt are hooked over the link; the link is inserted into the latch; the Duckbill is then brought down into and over the link, securely holding all of the pieces in place.

RaceQuip Latch & Link Harness Systems come as a "pull down" design. This means that the lap belts must be pulled down and away from the center latch mechanism to tighten.  Since their belts are "double adjustable", lengths are easily adjusted on either end for ease of installation. Using the included three bar slide you can mount the belts by either wrapping them around a rollbar or by bolting them in place. Snap-in ends and eyebolts are sold separately if you want to install your belts in that manner. 

Features and Specifications:

  • Exceeds SFI 16.1 Rating (SFI Tags Affixed)
  • NOT D.O.T. / FMVSS Certified for On Highway Use
  • Premium 3" Polyester Webbing
  • Twin Individual Shoulder Belts
  • 2" Shoulder Accomodates HNR / HANS Device
  • Pull Down Style Lap Belt
  • 5 Point Design - Single 2" Crotch Sub Strap
  • Hardware Ends Installed
  • Double Adjustable for Ease of Installation
  • Wrap Around or Bolt-in Mounting
  • Drop-Forged Steel Hardware (no bolts)
  • Shoulders Adjust from 20" to 62"
  • Lap Belt Adjusts 20" to 60"
  • Available in Black, Red, and Blue
  • Can Be Re-webbed (SFI) Upon Expiration
Racequip
Part #: RQ5PTHANSHNR
Price: $89.95 (USD) 
Direct Ship
RaceQuip Pull Up HANS/HNR Camlock Racing Harness Sets - FIA 8853/98 Standard Approved

Racing harnesses are required at any respectable track or strip, but they tend to run upwards of hundreds of dollars. RaceQuip designs and builds safety equipment for just this issue! Since 1975, RaceQuip has been building some of the highest quality racing safety gear on the market. Their high quality and low cost safety gear is the result of wanting to provide "The Best Value in Safety", that keeps drivers safe without draining their wallet.

RaceQuip FIA Camlock Harness Sets feature an ultra-lightweight magnesium alloy cam buckle with an activation lever that points downward. The FIA cam buckle utilizes a wide engagement cone for easy snap-in. A 45˚(right or left) unlatch movement prevents accidental opening and precise spring pressure provides a positive feel. All RaceQuip FIA Approved belts are constructed using premium 3” Polyester webbing that is transverse mono filament woven to provide increased strength and smoother edges. Premium aluminum shoulder adjusters come standard on all RaceQuip FIA approved harness sets.

The RaceQuip 751 Series Camlock belt set offers many professional features yet affordable pricing for the grassroots racer. This Camlock belt set comes in a six (6) point configuration with a Pull-Up  lap belt design. The harness sets pass the stringent FIA 8853/98 standard.

They start with a super-lightweight 165 gram magnesium alloy cam buckle. The buckle features an engagement cone which allows the belts to snap into the cam mechanism at angles of 21˚ left or right and 11˚ up and down for ease of engagement. Precise internal spring pressure allows a positive feel on the 45˚ (right or left) unlatch movement that reduces the chance of accidental opening.

Next, the forged SAE 4130 steel buckle hardware is sewn onto the premium 3” polyester webbing, called “transverse mono filament woven”, which means that there are mono filament fibers inter-woven into the straps in a pattern that transverses the standard weave. This design accomplishes two tasks - added strength and smoother edges on the belts. The harness sets also feature premium, lightweight, non-slip aluminum shoulder adjusters with easy lift grips. The lap belt adjusters utilize an anti-slip tensioner device as well. Heavy-duty forged steel SAE 1050 3" slide bars and 3" bolt on ends come already installed, but they can be easily removed if you prefer to mount your belts by wrapping them around a rollbar or you can change them out to snap-hook ends. Belt adjustment lengths are 20” to 68” for shoulders and 20” to 68” for the lap belt.

Features and Specifications:

  • Lightweight 165 gram Magnesium Alloy Cam Buckle
  • Exceeds Stringent FIA 8853/98 Standard (FIA Tags Affixed)
  • 6 Point Design - Dual 2" Crotch Strap
  • NOT D.O.T. / FMVSS Certified for On Highway Use
  • Pull Up Lap Belt Adjusters
  • Wide Engagement Cone For Easy Snap In
  • Precise Spring Pressure for a Positive Feel
  • 45° (right or left) Unlatch Movement Mitigates Accidental Opening
  • Heavy-Duty Drop-Forged Steel Hardware Ends Installed (no bolts)
  • Wrap Around or Bolt-in Mounting
  • Premium 3” Polyester Webbing
  • Transverse Mono Filament Woven for Increased Strength and Smoother Edges
  • Premium Aluminum Shoulder Adjusters
  • Shoulder Belt Adjustment Length is 20" to 68"
  • Lap Belt is Adjustable from 20" to 68"
  • Available in Black or Red
Racequip
Part #: RQFIASFICAMLOCK
Price: $249.95 (USD) 
Direct Ship
Takata Racing Drift 2

In the early days of racing, every organization from Nascar to Formula 1 had very loose rules on safety harnesses and equipment. In 1964, Takata saw a need to prevent the rampant injures that were occurring in motorsports and introduced their first full-harness seat belt system in the Subaru 360 that participated in the second Japanese Grand Prix. Ever since, Takata has continued to develop racing harness systems for automotive teams across the globe, perfecting their systems for safety and comfort. Already being a prominent name in the JDM racing scene and working with many professional teams around the world, the opening of the Takata Racing European division in Germany only further bolstered their name and reputation among numerous racing teams and organizations thanks to increased production, great value, and public availability.

The Takata DRIFT Series of belts, manufactured by Takata Racing in Germany, are uniquely designed for safe installation in passenger cars with factory seats. The belts meet both FMVSS (US) & ECE (European) standards for "Street Legal" use. Both belts incorporate Takata ASM® technology and bendable stainless steel mounting hardware allowing installation to factory seat belt mounting points without effecting the operation of factory seat belts. Takata DRIFT belts set new standard style and safety of aftermarket, Street Legal belts. DRIFT belts come in both Takata Green and Black to match any interior scheme with style!

The lap belt Snap-On attachments brackets are sewn into the lap belts. The shoulder belt attachment brackets can be removed allowing you to wrap the shoulder belts to a harnessbar or rollbar using the 3-bar adjusters provided. The Snap-On version is designed to be attached to eye bolts at the lap belts.

Features and Specifications:

  • Street Oriented 4 point harness
  • 2" Shoulders, 2" Lap belts with Pull-up adjusters
  • Street Legal (ECE R 16 and FMVSS 209 - Legal for use as the primary restraint in a road-going vehicle)
  • Snap-on hardware
  • Available in Green or Black
  • Buckle on right lap belt
Takata
Part #: 74000US-0
Price: $199.00 (USD) 
Ships in 9 days
Quantity:   
Takata Racing Drift 3

In the early days of racing, every organization from Nascar to Formula 1 had very loose rules on safety harnesses and equipment. In 1964, Takata saw a need to prevent the rampant injures that were occurring in motorsports and introduced their first full-harness seat belt system in the Subaru 360 that participated in the second Japanese Grand Prix. Ever since, Takata has continued to develop racing harness systems for automotive teams across the globe, perfecting their systems for safety and comfort. Already being a prominent name in the JDM racing scene and working with many professional teams around the world, the opening of the Takata Racing European division in Germany only further bolstered their name and reputation among numerous racing teams and organizations thanks to increased production, great value, and public availability.

The Takata DRIFT Series of belts, manufactured by Takata Racing in Germany, are uniquely designed for safe installation in passenger cars with factory seats. The belts meet both FMVSS (US) & ECE (European) standards for "Street Legal" use. Both belts incorporate Takata ASM® technology and bendable stainless steel mounting hardware allowing installation to factory seat belt mounting points without effecting the operation of factory seat belts. Takata DRIFT belts set new standard style and safety of aftermarket, Street Legal belts. DRIFT belts come in both Takata Green and Black to match any interior scheme with style!

The lap belt Snap-On attachments brackets are sewn into the lap belts. The shoulder belt attachment brackets can be removed allowing you to wrap the shoulder belts to a harnessbar or rollbar using the 3-bar adjusters provided. The Snap-On version is designed to be attached to eye bolts at the lap belts.

Features and Specifications:

  • Street Oriented 4 point harness
  • 3" Shoulders, 2" Lap belts with Pull-up adjusters
  • Street Legal (ECE R 16 and FMVSS 209 - Legal for use as the primary restraint in a road-going vehicle)
  • Snap-on hardware
  • Available in Green or Black
  • Buckle on right lap belt
Takata
Part #: 70002US-H2
Price: $305.00 (USD) 
Ships in 9 days
Free Shipping Free Shipping
Quantity:   
RaceQuip Dragster 4 Point U-Style Camlock Racing Harness - SFI 16.1 Approved

Racing harnesses are required at any respectable track or strip, but they tend to run upwards of hundreds of dollars. RaceQuip designs and builds safety equipment for just this issue! Since 1975, RaceQuip has been building some of the highest quality racing safety gear on the market. Their high quality and low cost safety gear is the result of wanting to provide "The Best Value in Safety", that keeps drivers safe without draining their wallet.

RaceQuip Dragster U Style Camlock Harness Sets feature a durable aluminum cam buckle with an activation lever that points downward. The Sportsman cam utilizes a 45˚(right or left) unlatch movement to prevent accidental opening and the precise spring pressure provides a positive feel. The top shoulder strap is one continuous strap that mounts to a rail type dragster chassis

All harness systems are constructed using drop-forged steel hardware for ultimate strength and reduced weight. All hardware is cadmium plated for added protection. They use only 3" (2" for HNR) premium polyester webbing for strength. Belts and hardware are routinely tested to verify compliance with SFI 16.1 standards.

Features and Specifications:

  • Lightweight Aluminum Alloy Cam Buckle
  • Exceeds SFI 16.1 Rating (SFI Tags Affixed)
  • Designed for Rail Type Dragster Chassis
  • NOT D.O.T. / FMVSS Certified for on Highway Use
  • "U" Style Continuous Shoulder Belt
  • Single 2" Crotch Strap for 4-point Installation
  • Cam Buckle Stays Affixed to Crotch Strap
  • Pull Up Lap Belt Adjusters
  • Wide Engagement Cone For Easy Snap In
  • Precise Spring Pressure for a Positive Feel
  • 45° (right or left) Unlatch Movement Mitigates Accidental Opening
  • Heavy-Duty Drop-Forged Steel Hardware Ends Installed (no bolts)
  • Wrap Around or Bolt-in Mounting (Not Shoulder)
  • Premium 3” Polyester Webbing
  • Transverse Mono Filament Woven for Increased Strength and Smoother Edges
  • Shoulder Belt Adjustment Length is 20" to 40"
  • Lap Belt is Adjustable from 20" to 60"
  • Can Be Re-Webbed (SFI Cert.) Upon Expiration
  • Available in Black or Red
Racequip
Part #: RQDRUCAMLOCK
Price: $139.95 (USD) 
Direct Ship
Takata 6-Point Conversion Sub Strap for Race 4 Harness - Black

In the early days of racing, every organization from Nascar to Formula 1 had very loose rules on safety harnesses and equipment. In 1964, Takata saw a need to prevent the rampant injures that were occurring in motorsports and introduced their first full-harness seat belt system in the Subaru 360 that participated in the second Japanese Grand Prix. Ever since, Takata has continued to develop racing harness systems for automotive teams across the globe, perfecting their systems for safety and comfort. Already being a prominent name in the JDM racing scene and working with many professional teams around the world, the opening of the Takata Racing European division in Germany only further bolstered their name and reputation among numerous racing teams and organizations thanks to increased production, great value, and public availability.

If you are looking to upgrade your Race 4 4-point harness into a 6-point harness, then all you need is Takata's conversion sub strap. It features two 2-inch straps that are mounted to one T-bar on one end and a Snap-On bracket on each strap's other end. The T-bar is low-profile for comfort and ease of use and the Snap-On brackets allow the straps to be mounted to eye bolt mounts. This sub strap is FIA approved to accompany the FIA approval of your Race 4 racing harness.

Takata
Part #: 79000US-0
Price: $95.00 (USD) 
Ships in 9 days
Quantity:   
Schroth Racing 2 Inch Harness Pads Cushioned pads that cover the 2" shoulder belts so they don't dig into your shoulders. These pads simply cover the belts and fasten with a zipper. Available in multiple colors with a "Schroth Racing" patch sewn on (flip the pad over if you don't want the logo showing). These can even be used on stock 3-point seatbelts to prevent the belt from rubbing against your neck. Sold as a pair of pads (enough to fit one racing harness).
Schroth
Part #: SR-2IN-PADS
Price: $31.95 (USD) 
Direct Ship
Takata 3 Constructed of high quality comfort foam and wrapped in Dinamica micro-fiber suede, this comfort pad prevents the seat belt or harness strap from making you uncomfortable when strapped in for extended periods of time. Each pad fits easily onto a 3 inch strap by opening from a side zipper and slipping over top the strap. The bottom of the strap also has an extension of material to further protect below the shoulderbelt adjust. These pads are available in two colors: Black and Green.
Takata
Part #: 78008-H2
Price: $99.00 (USD) 
Ships in 9 days
Free Shipping Free Shipping
Quantity:   
RaceQuip 5 to 6 Point Latch And Link Harness Conversion - SFI 16.1 Approved

Racing harnesses are required at any respectable track or strip, but they tend to run upwards of hundreds of dollars. RaceQuip designs and builds safety equipment for just this issue! Since 1975, RaceQuip has been building some of the highest quality racing safety gear on the market. Their high quality and low cost safety gear is the result of wanting to provide "The Best Value in Safety", that keeps drivers safe without draining their wallet.

RaceQuip now offers a conversion kit for those who are looking to upgrade their RaceQuip 5 point harness to a 6 point set. Designed for use with all RaceQuip latch & link harness sets, this conversion uses a "mustache bar" to separate and move the crotch straps outward. The kit includes hardware (no bolts) to allow the belts to be mounted as a wrap around or as a bolt-in. Available in black, red and blue.

All harness systems are constructed using drop-forged steel hardware for ultimate strength and reduced weight. All hardware is cadmium plated for added protection.

Features and Specifications:

  • Exceeds SFI 16.1 Rating (SFI Tags Affixed)
  • NOT D.O.T. / FMVSS Certified for On Highway Use
  • Wrap Around or Bolt-in Mounting
  • Drop-Forged Steel Hardware (no bolts)
  • Available in Black, Red, Blue
  • Can Be Re-webbed (SFI) Upon Expiration
Racequip
Part #: RQ6PTCON
Price: $19.95 (USD) 
Direct Ship
Takata Racing Drift 3

In the early days of racing, every organization from Nascar to Formula 1 had very loose rules on safety harnesses and equipment. In 1964, Takata saw a need to prevent the rampant injures that were occurring in motorsports and introduced their first full-harness seat belt system in the Subaru 360 that participated in the second Japanese Grand Prix. Ever since, Takata has continued to develop racing harness systems for automotive teams across the globe, perfecting their systems for safety and comfort. Already being a prominent name in the JDM racing scene and working with many professional teams around the world, the opening of the Takata Racing European division in Germany only further bolstered their name and reputation among numerous racing teams and organizations thanks to increased production, great value, and public availability.

The Takata DRIFT Series of belts, manufactured by Takata Racing in Germany, are uniquely designed for safe installation in passenger cars with factory seats. The belts meet both FMVSS (US) & ECE (European) standards for "Street Legal" use. Both belts incorporate Takata ASM® technology and bendable stainless steel mounting hardware allowing installation to factory seat belt mounting points without effecting the operation of factory seat belts. Takata DRIFT belts set new standard style and safety of aftermarket, Street Legal belts. DRIFT belts come in both Takata Green and Black to match any interior scheme with style!

The Bolt-On version generally bolts to the existing factory mounting points for the front lap belts. The shoulder belts generally mount either to the rear lap belt mounting points OR they can be wrapped directly to a roll-cage or harness bar.

The lap belt Bolt-On attachments brackets are sewn into the lap belts. The shoulder belt attachment brackets can be removed allowing you to wrap the shoulder belts to a harnessbar or rollbar using the 3-bar adjusters provided.

Features and Specifications:

  • Street Oriented 4 point harness
  • 3" Shoulders, 2" Lap belts
  • Street Legal (ECE R 16 and FMVSS 209 - Legal for use as the primary restraint in a road-going vehicle)
  • Bolt-in hardware
  • Available in Green or Black
  • Buckle on right lap belt
Takata
Part #: 70003US-H2
Price: $305.00 (USD) 
Ships in 9 days
Quantity:   
RaceQuip FIA Approved Euro Style Camlock Harness Set

RaceQuip FIA Camlock Harness Sets feature an ultra-lightweight magnesium alloy cam buckle with an activation lever that points downward. The FIA cam buckle utilizes a wide engagement cone for easy snap-in. A 45˚(right or left) unlatch movement prevents accidental opening and precise spring pressure provides a positive feel. All RaceQuip FIA Approved belts are constructed using premium 3” Polyester webbing that is transverse mono filament woven to provide increased strength and smoother edges. Premium aluminum shoulder adjusters come standard on all RaceQuip FIA approved harness sets.

The RaceQuip Euro Style Series Camlock belt set offers many professional features yet affordable pricing for the grassroots racer. This Camlock belt set comes in a six (6) point configuration with a pull-down  lap belt design. This harness set passes the stringent FIA 8853/98 standard. 

They start with a super-lightweight 165 gram magnesium alloy cam buckle. The buckle features an engagement cone which allows the belts to snap into the cam mechanism at angles of 21˚ left or right and 11˚ up and down for ease of engagement. Precise internal spring pressure allows a positive feel on the 45˚ (right or left) unlatch movement that reduces the chance of accidental opening.

Next, the forged SAE 4130 steel buckle hardware is sewn onto the premium 3” polyester webbing, called “transverse mono filament woven”, which means that there are mono filament fibers inter-woven into the straps in a pattern that transverses the standard weave. This design accomplishes two tasks - added strength and smoother edges on the belts. The harness sets also feature premium, lightweight, non-slip aluminum shoulder adjusters with easy lift grips. The lap belt adjusters utilize an anti-slip tensioner device as well. Heavy-duty forged steel SAE 1050 3" slide bars and 3" bolt on ends come already installed, but they can be easily removed if you prefer to mount your belts by wrapping them around a rollbar or you can change them out to snap-hook ends. Belt adjustment lengths are 20” to 68” for shoulders and 20” to 68” for the lap belt.

Features and Specifications:

  • Lightweight 165 gram Magnesium Alloy Cam Buckle
  • Formula Car Style Dual Crotch Strap
  • FIA 8853/98 Tags Only – No SFI Certification
  • NOT D.O.T. / FMVSS Certified for On Highway Use
  • 2” Wide Lap Belt Has Pull Down Adjusters
  • 2" Shoulder Belt Accommodates HNR / HANS Device
  • Crotch Strap is Captured When Shoulder Belts Snap Into Buckle
  • Shoulder and Lap Belt Utilize Aluminum Adjusters
  • Wide Engagement Cone For Easy Snap In
  • Precise Spring Pressure for a Positive Feel
  • 45° (right or left) Unlatch Movement Mitigates Accidental Opening
  • Shoulders and Crotch Straps can be installed as Wrap Around, Bolt-in, or Snap Hook Mounting (no bolts or eyebolts included)
  • The Lap Belt Bolt On Ends are sewn on
  • Cam Buckle is Affixed to Right Lap Belt
  • Premium 2” Polyester Webbing
  • Transverse Mono Filament Woven for Increased Strength and Smoother Edges
  • Shoulder Belt Adjustment Length is 20" to 60"
  • Lap Belt is Adjustable from 25" to 50"
  • Available in Black Only
Racequip
Part #: 755005
Price: $269.95 (USD) 
Direct Ship
Quantity:   
RaceQuip Sportsman 5-Point and 6-Point Camlock Racing Harnesses - SFI 16.1 Approved

Racing harnesses are required at any respectable track or strip, but they tend to run upwards of hundreds of dollars. RaceQuip designs and builds safety equipment for just this issue! Since 1975, RaceQuip has been building some of the highest quality racing safety gear on the market. Their high quality and low cost safety gear is the result of wanting to provide "The Best Value in Safety", that keeps drivers safe without draining their wallet.

RaceQuip Sportsman Camlock Harness Sets feature a durable aluminum cam buckle with an activation lever that points downward. The Sportsman cam utilizes a 45˚(right or left) unlatch movement to prevent accidental opening and the precise spring pressure provides a positive feel.

All harness systems are constructed using drop-forged steel hardware for ultimate strength and reduced weight. All hardware is cadmium plated for added protection. They use only 3" (2" for HNR) premium polyester webbing for strength. Belts and hardware are routinely tested to verify compliance with SFI 16.1 standards.

Features and Specifications:

  • Lightweight Aluminum Alloy Cam Buckle
  • Exceeds SFI 16.1 Rating (SFI Tags Affixed)
  • NOT D.O.T. / FMVSS Certified for on Highway Use
  • 5 Point Design - Single 2" Crotch Strap
  • 6 Point Design - Dual 2" Crotch Strap
  • Pull Down or Up Lap Belt Adjusters Available
  • Wide Engagement Cone For Easy Snap In
  • Precise Spring Pressure for a Positive Feel
  • 45° (right or left) Unlatch Movement Mitigates Accidental Opening
  • Cam Buckle Stays Affixed to Right Side Lap Belt
  • Heavy-Duty Drop-Forged 3" Steel Hardware Ends Installed (no bolts)
  • Wrap Around or Bolt-in Mounting
  • Premium 3” Polyester Webbing
  • Transverse Mono Filament Woven for Increased Strength and Smoother Edges
  • Shoulder Belt Adjustment Length is 25" to 72"
  • Lap Belt is Adjustable from 30" to 70"
  • Can Be Re-Webbed (SFI Cert.) Upon Expiration
  • Available in Black, Red, and Blue
Racequip
Part #: RQSPCAMLOCK
Price: $139.95 (USD) 
Direct Ship
RaceQuip 4

RaceQuip recommends using their superior hardware and mounting options for alternative mounting methods to ensure that the hardware will hold up to the demands in an accident. All of there hardware and brackets are constructed from drop-forged steel and are cadmium plated for strength and corrosion resistance.

This plate reinforces the mounting point of and eyelet bolt attached to the vehicle at the body or floor of the vehicle.

Racequip
Part #: 700070
Price: $3.95 (USD) 
Direct Ship
Quantity:   
Takata Racing Harness Bolt In Braket The B24 is the most economical bolt-in bracket offered. It is a heavy-duty Steel bracket that cannot be bent to aid installation. Dimensions are 5mm thick, 69x46mm with a 13mm (1/2") bolt hole. There is a slight 10° bend so that this bracket can be bolted directly to a fl at surface and leave room for webbing wrapped into it. FIA and SFI 16.1/16.5 approved. Cannot be used for a Lap Belt bolt-in bracket under SFI 16.5. 3" webbing must be folded at the edges for use with this bracket.
Takata
Part #: B24.15.13
Price: $2.75 (USD) 
Ships in 9 days
Quantity:   
RaceQuip 7/16-20 Long Eyebolt, Nut & Washer Harness Mount Hardware

RaceQuip recommends using their superior hardware and mounting options for alternative mounting methods to ensure that the hardware will hold up to the demands in an accident. All of there hardware and brackets are constructed from drop-forged steel and are cadmium plated for strength and corrosion resistance.

This eyelet bolt attaches the harness bracket to the vehicle by being secured to the body or floor of the vehicle.

Racequip
Part #: 700060
Price: $7.95 (USD) 
Direct Ship
Quantity:   
Brey-Krause Clip in Harness mount - Passenger  This Mount is bolts to the OE lap belt mount on the passenger side to provide a clip in point for clip in style harness's. 
Brey-Krause
Part #: R-9288
Price: $79.95 (USD) 
Ships in 5 days
Quantity:   
RaceQuip 5 Point Latch And Link 3

Racing harnesses are required at any respectable track or strip, but they tend to run upwards of hundreds of dollars. RaceQuip designs and builds safety equipment for just this issue! Since 1975, RaceQuip has been building some of the highest quality racing safety gear on the market. Their high quality and low cost safety gear is the result of wanting to provide "The Best Value in Safety", that keeps drivers safe without draining their wallet.

This Standard 5 Point Latch and Link Racing harness is RaceQuips most popular racing harness, priced at $74.99 or below while still being fully SFI 16.1 Approved.

All harness systems are constructed using drop-forged steel hardware for ultimate strength and reduced weight. All hardware is cadmium plated for added protection. They use only 3" premium polyester webbing and all belts are box-x pattern sewn to ensure uniform stitch length and strength. Belts and hardware are routinely tested to verify compliance with SFI 16.1 standards.

All of their  harness sets feature a latch & link system to retain the belts. The latch & link system is distinguished by a pivoting "hammer," called a Duckbill, which locks all of the belts into place by snapping down into a detent. Both shoulder belts and the sub belt are hooked over the link; the link is inserted into the latch; the Duckbill is then brought down into and over the link, securely holding all of the pieces in place.

RaceQuip Latch & Link Harness Systems come as a "pull down" design. This means that the lap belts must be pulled down and away from the center latch mechanism to tighten.  Since their belts are "double adjustable", lengths are easily adjusted on either end for ease of installation. Using the included three bar slide you can mount the belts by either wrapping them around a rollbar or by bolting them in place. Snap-in ends and eyebolts are sold separately if you want to install your belts in that manner.

Features and Specifications:

  • Exceeds SFI 16.1 Rating (SFI Tags Affixed)
  • NOT D.O.T. / FMVSS Certified for On Highway Use
  • Premium 3" Polyester Webbing
  • Twin Individual Shoulder Belts
  • Pull Down Style Lap Belt
  • 5 Point Design - Single 2" Crotch Sub Strap
  • 3" Hardware Ends Installed 
  • Double Adjustable for Ease of Installation
  • Wrap Around or Bolt-in Mounting
  • Drop-Forged Steel Hardware (no bolts)
  • Shoulders Adjust from 20" to 62"
  • Lap Belt Adjusts 20" to 60"
  • Available in Black, Red, Blue, Yellow, Orange, Purple, Platinum, Green and Pink
  • Can Be Re-webbed (SFI) Upon Expiration
Racequip
Part #: 7110XX5PT
Price: $69.95 (USD) 
Direct Ship
Racing Seat Belt Harness Retaining Guide Collars (Pair) These little guys are one of our favorite final touches on a race car build. After years of requests, we now are able to supply these for more than just our race team's use. These aluminum collars bolt on your roll cage's harness bar (or any bar for that matter) and help keep your seat belt harnesses from sliding on the bar. You can use just one pair to accomplish this, or 2 pairs (4 collars total) for the best looking and functioning install. The beauty of these collars (besides being lightweight and looking clean) is that they can be adjusted from side to side, which is convenient if you change you seat or belt configuration. They can also be used for other applications as well, such as taming that helmet net strap. If you're looking for a clean, professional looking solution, these are a superb final touch. As used on our own Championship winning TMS E46 and E90 race cars.

We offer these guide collars in two sizes: for 1.5" OD roll bar tubing or for 1.75" OD roll bar tubing (choose your size below). Check your cage tubing diameter especially if your car was built in Europe as they used metric tubing sizes. If you need a metric size, contact us. Also measure with paint applied, not bare tubing. These are sold by the pair, so be sure to modifying your quantity below (or in the cart) if you need them for both seats.
Turner Motorsport
Part #: TIN9903150
Price: $79.90 (USD) 
Ships in 3 Days
Free Shipping Free Shipping
on orders $99 and up
Racequip 3

RaceQuip recommends using their superior hardware and mounting options for alternative mounting methods to ensure that the hardware will hold up to the demands in an accident. All of there hardware and brackets are constructed from drop-forged steel and are cadmium plated for strength and corrosion resistance.

This 3-Bar Slide Mount connects and secures the harness to the harness bracket or rollbar.

Racequip
Part #: 700075
Price: $5.95 (USD) 
Direct Ship
Quantity:   
Brey-Krause Clip in Harness mount- Driver This Mount is bolts to the OE lap belt mount on the driver side to provide a clip in point for clip in style harness's. 
Brey-Krause
Part #: R-9289
Price: $79.95 (USD) 
Ships in 5 days
Quantity:   
RaceQuip 2

RaceQuip recommends using their superior hardware and mounting options for alternative mounting methods to ensure that the hardware will hold up to the demands in an accident. All of there hardware and brackets are constructed from drop-forged steel and are cadmium plated for strength and corrosion resistance.

This bracket attaches the harness to the vehicle via a mounting bolt.

Racequip
Part #: 700005
Price: $4.95 (USD) 
Ships in 9 days
Quantity:   
Takata 7/16 These Eye bolts are designed to work perfectly with the B14 Snap On Brackets.
Takata
Part #: SG22
Price: $4.00 (USD) 
Ships in 9 days
Quantity:   
Takata Racing Drift 2

In the early days of racing, every organization from Nascar to Formula 1 had very loose rules on safety harnesses and equipment. In 1964, Takata saw a need to prevent the rampant injures that were occurring in motorsports and introduced their first full-harness seat belt system in the Subaru 360 that participated in the second Japanese Grand Prix. Ever since, Takata has continued to develop racing harness systems for automotive teams across the globe, perfecting their systems for safety and comfort. Already being a prominent name in the JDM racing scene and working with many professional teams around the world, the opening of the Takata Racing European division in Germany only further bolstered their name and reputation among numerous racing teams and organizations thanks to increased production, great value, and public availability.

The Takata DRIFT Series of belts, manufactured by Takata Racing in Germany, are uniquely designed for safe installation in passenger cars with factory seats. The belts meet both FMVSS (US) & ECE (European) standards for "Street Legal" use. Both belts incorporate Takata ASM® technology and bendable stainless steel mounting hardware allowing installation to factory seat belt mounting points without effecting the operation of factory seat belts. Takata DRIFT belts set new standard style and safety of aftermarket, Street Legal belts. DRIFT belts come in both Takata Green and Black to match any interior scheme with style!

The Bolt-On version generally bolts to the existing factory mounting points for the front lap belts. The shoulder belts generally mount either to the rear lap belt mounting points OR they can be wrapped directly to a roll-cage or harness bar.

The lap belt Bolt-On attachments brackets are sewn into the lap belts. The shoulder belt attachment brackets can be removed allowing you to wrap the shoulder belts to a harnessbar or rollbar using the 3-bar adjusters provided.

Features and Specifications:

  • Street Oriented 4 point harness
  • 2" Shoulders, 2" Lap belts
  • Street Legal (ECE R 16 and FMVSS 209 - Legal for use as the primary restraint in a road-going vehicle)
  • Bolt-in hardware
  • Available in Green or Black
  • Buckle on right lap belt
Takata
Part #: 74001US-0
Price: $199.00 (USD) 
Ships in 9 days
Quantity:   
Takata Racing

In the early days of racing, every organization from Nascar to Formula 1 had very loose rules on safety harnesses and equipment. In 1964, Takata saw a need to prevent the rampant injures that were occurring in motorsports and introduced their first full-harness seat belt system in the Subaru 360 that participated in the second Japanese Grand Prix. Ever since, Takata has continued to develop racing harness systems for automotive teams across the globe, perfecting their systems for safety and comfort. Already being a prominent name in the JDM racing scene and working with many professional teams around the world, the opening of the Takata Racing European division in Germany only further bolstered their name and reputation among numerous racing teams and organizations thanks to increased production, great value, and public availability.

The RACE 4 is the benchmark harness for Track Day/Drift/Show cars. This true racing harness comes with FIA approval, and the exclusive TAKATA aluminum multi-point release cam-lock buckle. Additional features include asmTM system to prevent submarining, 3" shoulder belts, and 2" lap belts with Pull-up adjusters.

The lap belt Snap-On attachment brackets are sewn into the lap belts. The shoulder belt attachment brackets are wrapped in and can be removed allowing you to wrap the shoulder belts to a harnessbar or rollbar using the 3-bar adjusters provided.

Features and Specifications:

  • 4-point belt Racing-oriented belt
  • ASM (Anti-Submarining) Technology
  • 3" Shoulder belt, 2" Lap (Pull Up)
  • Buckle on right lap belt
  • Central Camlock
  • Option for added Anti-Sub Strap (creating a 6-point belt)
  • FIA Approved

*Does not meet US FMVSS 209 requirement for a single red/orange push button release for street legal use.

Takata
Part #: 71000US-0
Price: $375.00 (USD) 
Ships in 9 days
Quantity: