click to Chat Live
Contact YouTube Blog Twitter facebook Turner Motorsport on Instagram
1-800-280-6966
 |   Login
  • 0
 |   Login
Shopping Cart (0) Wishlist
Contact

(0) item(s) in your Shopping Cart
Home
Categories
Specials Gifts & Clothing
  1. Genuine BMW Accessories
  2. Genuine BMW Clothing
  3. Turner Shirts Hats and Gear
  4. Gifts under $25
  5. Gifts under $50
  6. Gifts under $100
  7. Gifts over $100
  8. Gift Certificates
  9. Stocking Stuffers
  10. Gift Packages
Brakes
  1. Brake Pads
  2. Brake Rotors
  3. Brake Fluid
  4. Brake Calipers
  5. Caliper Rebuild Kits
  6. Parking Brake Parts
  7. Brake Master Cylinders
  8. ABS/DSC System Parts
  9. Brake Cooling Ducts & Backing Plates
  10. Brake Pads - Brembo GT BBK Calipers
  11. Brake Pads - StopTech BBK Calipers
Car Care & Accessories
  1. Wheel & Tire Cleaning
  2. Wax, Polish and Cleaning Supplies
  3. Detailing Gear
  4. Leather & Plastic Care
  5. Car Cleaning Supplies
  6. Chassis Paint, Coatings, Sealants, and Rust Conversion
Drivetrain
  1. Differential and Gearing Upgrades
  2. Performance Clutch Kits & Parts
  3. Lightweight Aluminum Flywheel Upgrades
  4. Clutch Parts
  5. Axle Shafts
  6. Driveshafts
  7. Performance Short Shift Kits
  8. Drivershaft Center Support Bearings
  9. Flex Discs & Guibos
  10. Transmission Parts
Engine Parts
  1. Water Pumps
  2. Radiators & Cooling System Overhaul Kits
  3. Radiator Hoses, Cooling Hoses, & Hose Sets
  4. Camshafts
  5. External Engine Parts
  6. Drive Belts & V-Belts
  7. Gaskets, Gasket Sets, Seals, & O-Rings
  8. Crankcase Vent, PCV, and Oil Separator Systems
  9. Motor Mounts
  10. Electrical Sensors, Switches, & Relays
  11. Ignition Parts
  12. Alternator & Alternator Parts
  13. Starter Motors & Starter Parts
  14. Fuel System Parts
  15. Internal Engine Parts
  16. Cylinder Head Parts & Head Bolts
Exhaust
  1. Oxygen Sensor - O2 Sensors
  2. Exhaust Gaskets Hangers and Parts
Exterior / Body
  1. Chrome Grills & Trim
  2. Emblems & Decals for Hood, Trunk, and Wheels
  3. Front Spoilers, Bumper Covers, & Air Dams
  4. Body Trim Parts & Accessories
  5. License Plate Brackets & License Plate Frames
  6. Wiper Blades, Wiper Pumps, & Wiper Motor Parts
  7. Hood Pins and AeroCatch Latches
  8. Racing Tow Hooks and Tow Straps
Intake
  1. aFe Cold-Air Intake Kits
  2. Turbos & Active Autowerke Superchargers
  3. aFe Performance Air Filters
  4. K&N Performance Air Filters
  5. Intake Cleaning & Recharging Kits
Interior
  1. Floor Mats
  2. Gauge Kits and Data Acquisition
  3. Auxiliary Input Adaptors for BMW
  4. Pedal Sets
  5. Escort Radar Detectors
  6. Racing Steering Wheels
  7. Shift Knobs, Shift Boots, & Shift Handles
  8. Seats & Seat Accessories
  9. Seat Belts and Racing Harnesses
  10. Sunshades & Windscreens
  11. Interior Trim & Accessories
Lighting
  1. Bulbs for Headlights, Turn Signals and Tail Lights
  2. Headlights, Headlight Lenses, & Headlight Parts
  3. Tail Lights
  4. Stealth Bulbs
Maintenance
  1. Routine Maintenance & Tune-Up Packages
  2. Oil Filters & Oil Filter Kits
  3. Air Filters
  4. Fuel Filters
  5. Spark Plugs
  6. Service Reset Tools & Fault Code Readers
  7. Anti-Freeze and Coolant
  8. Engine Oils - Genuine BMW and OEM
  9. Power Steering and Hydraulic Fluids
  10. Transmission and Gear Oil - Genuine BMW and OEM
  11. MOTUL Engine Oil and Gear Lubricants
  12. Red Line Oil & Fluids
  13. Liqui-Moly Oil and Additives
Suspension
  1. Shocks & Struts
  2. Bilstein PSS PSS9 PSS10 Coil Over Suspensions
  3. H&R Coil Over Suspensions
  4. Suspension Bushings & Mounts
  5. Tie Rods & Steering Parts
  6. Coil Over Spring Hardware
Wheels
  1. Apex Flow Formed Alloy Wheels
  2. Original BMW Wheels and Wheel Upgrades
  3. Turner Motorsport Wheel Spacers
  4. ECS Tuning Wheel Spacers
  5. H&R Wheel Spacers
  6. Wheel Bolts, Wheel Studs and Nuts
  7. Wheel Emblems, Caps, and Accessories
Tools
  1. Alignment Tools
  2. Battery Chargers and Tenders
  3. Brake Tools
  4. Coil Over Wrenches
  5. Cooling System Tools
  6. Cylinder Head and VANOS Tools
  7. Exhaust Tools
  8. Fan and Fan Clutch Tools
  9. Fuel System Tools
  10. Genuine BMW Tool Kits
  11. Oil Service Tools
  12. Sockets
  13. Spark Plug Sockets
  14. Transmission and Differential Tools
  15. Wheel Pin Tools
  16. Workshop Chemicals
Clearance
Choose BMW
BMW 1 Series
  1. (E82) 1-series Coupe 2008+
  2. (E88) 1-series Convertible 2008+
BMW 2 Series
  1. (F22) 2-Series Coupe 2014+
  2. (F23) 2-Series Convertible 2014+
  3. (F87) M2 2016+
BMW 3 Series
  1. (E21) 3-Series 1977-1983
  2. (E30) 3-series 1984-1991
  3. (E30) M3 1988-1991
  4. (E36) 3-series 1992-1999
  5. (E36) M3 1995-1999
  6. (E46) 3-Series 1999-2005
  7. (E46) M3 2001-2006
  8. (E90) 3-Series Sedan 2006-2011
  9. (E90) M3 Sedan 2008-2013
  10. (E91) 3-Series Touring 2006-2013
  11. (E92) 3-Series Coupe 2007-2013
  12. (E92) M3 Coupe 2008-2013
  13. (E93) 3-Series Convertible 2007-2013
  14. (E93) M3 Convertible 2008-2013
  15. (F30) 3-Series Sedan 2012+
  16. (F31) 3-Series Touring 2014+
  17. (F80) M3 2015+
  18. (F34) 3-Series Gran Turismo 2014+
BMW 4 Series
  1. (F32) 4-Series Coupe 2014+
  2. (F33) 4-Series Convertible 2015+
  3. (F34) 4-Series Gran Turismo 2014+
  4. (F82) M4 Coupe 2015+
  5. (F83) M4 Convertible 2015+
  6. (F36) 4-Series Gran Coupe 2015+
BMW 5 Series
  1. (E34) M5 1991-1993
  2. (E39) M5 2000-2003
  3. (E60) M5 2006-2010
  4. (E28) 5-Series 1982-1988
  5. (E34) 5-Series 1989-1995
  6. (E39) 5-Series 1996-2003
  7. (E60) 5-Series Sedan 2004-2010
  8. (E61) 5-Series Touring 2006-2010
  9. (F10) 5-Series 2011+
  10. (G30) 5-Series 2017+
BMW 6 Series
  1. (E24) 6-Series 1977-1989
  2. (E63) 6-Series Coupe 2004-2010
  3. (E64) 6-Series Convertible 2004-2010
  4. (F06) 6-Series Gran Coupe 2013+
  5. (F12) 6-Series Coupe 2011+
  6. (F13) 6-Series Convertible 2011+
BMW 7 Series
  1. (E32) 7-Series 1988-1994
  2. (E38) 7-Series 1995-2001
  3. (E65) 7-Series SWB 2002-2007
  4. (E66) 7-Series LWB 2002-2007
  5. (F01) 7-Series SWB 2009+
  6. (F02) 7-Series LWB 2009+
BMW 8 Series BMW Classics (E9, Bavaria, Isetta, etc)
  1. 2500
  2. 2800
  3. 3.0Si
  4. Bavaria
  5. 2800CS
  6. 3.0CS
  7. 2002
  8. 2002tii
  9. (E12) 528i 1977-1981
  10. (E12) 530i 1975-1978
BMW X Series (SAV)
  1. (E84) X1 Series 2013+
  2. (E83) X3 2004-2010
  3. (F25) X3 2011+
  4. (F26) X4 2015+
  5. (E53) X5 2000-2006
  6. (E70) X5 2007-2013
  7. (F15) X5 2014+
  8. (F85) X5 M 2015+
  9. (E71) X6 2008+
  10. (F16) X6 2015+
  11. (F86) X6 M 2015+
  12. (F48) X1 2016+
  13. (F48) X1 (2016+)
BMW Z Series
  1. (E36/7) Z3 1997-2002
  2. (E85) Z4 M Roadster
  3. (E85/E86/E89) Z4 2003+
  4. (E86) Z4 M Coupe
  5. (E52) Z8 2000-2003
BMW 1600-2002 / tii BMW i Series
  1. (I01) BMW i3 2014+
  2. (I12) BMW i8 2014+
MINI Cooper and Cooper S
Racing
Racing Home Racing News Racing Schedule Racing Photo Gallery
Gallery
Photo Gallery Wallpaper Project Cars
  1. Project i8
  2. Project F80 M3
  3. Turner F82 M4
  4. Turner X5 M
  5. Turner F22 2 Series
  6. Turner F13 M6
  7. Turner F10 M5
  8. Turner F30 335i
  9. Turner E9X M3
  10. Turner E92 335i
  11. Turner E82 1 Series
  12. Turner ActiveE (100% Electric)
  13. Turner E46 M3
  14. Turner E46 330i ZHP
  15. Turner E36 M3
  16. Turner E30 M3
  17. Turner MINI Cooper S
  18. McLaren F1
  19. Turner E92 M3 Lime Rock
  20. Turner F80 M3 Silverstone
Video Gallery
Projects
Turner BMW i8 Turner BMW F80 M3 Turner BMW F82 M4 Turner BMW X5 M Turner BMW F22 2 Series Turner BMW F13 M6 Turner BMW F10 M5 Turner BMW F30 335i Turner BMW E9X M3 Turner BMW E92 335i Turner BMW E82 1 Series Turner BMW ActiveE (100% Electric) Turner BMW E46 M3 Turner BMW E46 330i ZHP Turner BMW E36 M3 Turner BMW E30 M3 Turner MINI Cooper S McLaren F1 Turner BMW E92 M3 Lime Rock Turner BMW F80 M3 Silverstone
About Us
About Turner Motorsport Customer Feedback The Turner Team
  1. Open Positions
Returns Policy Shipping Info Contact Us Privacy Policy Security Policy FAQs

BMW E12-528i Specials, Deals & Discounts

You're currently viewing parts for your (E12) 528i 1977-1981. Reset your chassis
For accurate results, specify your model below.
Schwaben 17mm Allen Socket - 1/2

Always have the right tools for the job, this 17mm hex head driver is perfect for BMW manual transmission plugs and some axle shafts.

Features:

  •  large ½-inch drive socket 
  • Made of durable chrome vanadium steel

 

 

Part #: HS-1217H55
Price: $9.71 (USD) 
$12.95 (Sale - Save 25%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben Torx Screwdriver Kit - 6 Pieces

Torx® screwdriver set includes six common bit sizes, perfect for removing door and dashboard panels, interior trim, and smaller underhood components.

Features:

  • Hardened tips have center hole for use with both standard or tamper-proof Torx fasteners 
  • Large grips add comfort and leverage
  • Handle through-holes make them easy to hang from pegboard hooks
  • Entire kit packaged in a convenient molded case.
  • Sizes include: T10, T15, T20, T25, T27, and T30.
Part #: sd-t6pcs
Price: $22.46 (USD) 
$29.95 (Sale - Save 25%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Trim/Moulding Tool Kit - 5 Pieces

Plastic five-piece tool kit removes trim and door panels, moldings, and adhesive backed logos and badges, without damage. By using a non-marring plastic you can safely and easily remove trip pieces with confidence

 

Features:

  • Pull-type remover

  • Narrow edge remover

  • Wide edge remover

  • Handle remover

  • Upholstery clip remover

Part #: PHR-05s
Price: $11.21 (USD) 
$14.95 (Sale - Save 25%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben 32mm / 36mm Fan Clutch and Oil Filter Cap Open-End Wrench

Why buy two tools when you can get one that will do many jobs like this open end wrench? It is great for removing and installing the fan clutch and plastic oil filter cap. Also works great for removing and installing the VAN0S solenoid on M50 engine family. Use the same tools the Turner Motorsport tech's use!

Features:

  • Made of Chrome Vanadium Steel for strength
  • 32/36mm open end sides

 

Part #: DO-3236
Price: $14.96 (USD) 
$19.95 (Sale - Save 25%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben 30mm 12-Point Deep Socket, 1/2

This large socket is the perfect tool for axle nuts when servicing the axle shafts or wheel bearings.

Features:

  • ½-inch drive 30mm 12-point socket
  • 75mm depth  to accommodate many applications and different length shafts
  • Made of durable chrome vanadium steel

 

  • E36 3 series (1992-1999) -- no M3
  • E46 323/325 (1999-2005) -- no 330/M3
Part #: S-1230S
Price: $14.96 (USD) 
$19.95 (Sale - Save 25%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben Pocket Brake Fluid Tester

It is necessary to check the moisture content of your brake flluid beacuse brake fluid is hygroscopic, meaning it readily absorbs moisture. Over a period of time moisture will cause brake fluid to degrade. Once brake fluid reaches a certain level the brake fluid is no longer able to function properly in the brake hydraulic systems. 

This Schwaben Brake fluid tester has a green, yellow and red light that represent's moisture content of DOT 4 brake fluid to determine if service is needed.

Features:

  • Green LED, H2O level is <1.5% = OK
  • Yellow LED, H2O level is 1.5 to 3% =Replace soon
  • Red Led, H2O level is >3% Replace Immediately
  • Auto-off function
  • Bright Led Flashlight 
  • One AAA battery operation- not included

 

Part #: 015745SCH01A
Price: $19.46 (USD) 
$25.95 (Sale - Save 25%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Turner Motorsport Lanyard Turner Motorsport Lanyard - Perfect for wearing your pit pass to the race, or just hanging your keys on.
Part #: TMS-LANYARD-02
Price: $7.61 (USD) 
$8.95 (Sale - Save 15%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben 6mm Hose Clamp Flexible Driver

Makes those hard to reach hose clamps much easier to loosen up.

Features:

  • 6mm driver
  • 6"  flex shaft
  • Overall length of 10-1/2"
  • No-slip grip resistant to wet or oil coated hands

 

Part #: 010658SCH02A
Price: $8.21 (USD) 
$10.95 (Sale - Save 25%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben 46 Piece 1/4

The perfect kit containing most of your needed European essentials. 

Features:

  • 13PCS-1/4" DR.6PT SOCKETS: 4, 4.5 , 5 ,5.5 ,6 , 7, 8 ,9 ,10, 11, 12, 13, 14MM 
  • 1PC- 1/4" DR. QUICK RELEASE RATCHET (72T).
  • 2PC- 1/4" DR.50 & 100MM EXTENSIONS 
  • 1PC- 1/4" DR.150MM FLEXIBLE EXTENSION
  • 1PC- 1/4" DR.UNIVERSAL JOINT
  • 1PC- 1/4" DR.SLIDING T-BAR
  • 1PC- 1/4" DR.6" SPINNER HANDLE
  • 1PC- 1/4" DR.1/4" BIT HOLDER ADAPTER
  • 4PCS-HEX KEY WRENCHES:1.27, 1.5,2,2.5MM
  • 6PCS-1/4" HEX SOCKETS:3,4,5,6,7,8MM
  • 3PCS-1/4' SLOTTED SOCKETS:4,5.5,7MM
  • 3PCS-1/4" PHILIPS SOCKETS:PH1, PH2, PH3
  • 3PCS-1/4"POZI SOCKETS: PZ1, PZ2, PZ3
  • 6PCS-1/4" TORX SOCKETS: T10, T15, T20, T25, T30, T40

Own an E30? This tool kit is a perfect fit for your glovebox!

Part #: 010747SCH01A
Price: $37.46 (USD) 
$49.95 (Sale - Save 25%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben Deluxe Transverse Engine Support Bar

When doing work where the mounts and support need to be removed from the engine or transmission having a engine support bar is wise. By using this engine support the stress is coming off of whatever components are still attached reducing future unnecessary repairs. The safety side of it is having the heavy engine and transmission firmly supported as it should be instead of questionable jack techniques.  

 

Features:

  •  2" longer than most
  • Deluxe transverse support for even more stability
  •  Two angle chain hooks for safer and more stable chain support 
  •  61" long and fully adjustable to any width
  •  Weight rating is a full 1000 lbs.
  •  Includes four rubber padded feet to prevent slipping and damage to cars finish 
  • This tool features a dual hook design for holding engine or transmission in place
  •  Powder coated for long life and durability

Note: It is important that chains are hooked to both sides of hook, like in photo to insure load is supported evenly. 

 

Part #: 009595SCH01A
Price: $217.46 (USD) 
$289.95 (Sale - Save 25%)
Quantity:   
Schwaben 6

The Schwaben Pistol Grip Locking Pliers, a unique pistol style that is ideal in locations that do not allow the use of regular locking pliers.

Features:

  • The hammer-like lock release is easily pressed in tight locations giving maximum usability to the user
  • Durable, rubberized grip covers provide a comfortable, non-slip grip to ensure your hands have a solid hold at all times
  • Quickly and easily adjust the gate of the jaws for a secure clamp with the easy to use barrel adjuster
Part #: 014565SCH01A
Price: $26.21 (USD) 
$34.95 (Sale - Save 25%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Turner Motorsport Rear Deck Emblem / Badge TMS is proud to offer our own rear deck emblem, constructed out of the highest quality injection molded ABS plastic, then chrome plated and bonded to an OEM automotive grade adhesive backing. It perfectly accentuates the rear of your BMW and blends in flawlessly with the factory badges. Our badge measures 5" (127mm) x 1.1" (28mm) – similar to the dimensions on many of the factory badges.
Part #: TMS1622
Price: $21.21 (USD) 
$24.95 (Sale - Save 15%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Upper Spring Hats/Perches (Pair) - 2.5 Inch / 16mm Pin / Tapered Seat Made in the USA These aluminum upper spring hats are for coil over struts with a 2.5" coil over spring. The specs are listed below; match the hat specs with your spring and strut. For a proper fitment you must confirm the spring hat matches the strut pin, especially on high-end motorsport struts.

Spring I.D.Strut Pin Diam.Strut Pin Seat
2.5"16mmtapered

Part #: TSU9980550
Price: $50.96 (USD) 
$59.95 (Sale - Save 15%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Turner Motorsport Key Chain Add some blue and yellow jewelry to the key of your BMW. This sleek key ring pendant is made from high-quality stainless steel with colored Turner logo inlay and will look good paired with any BMW key whether it's a classic 2002 or a brand new M4.
Part #: TMSKEYCHAIN
Price: $8.46 (USD) 
$9.95 (Sale - Save 15%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
KBS Auto Gold Standard Fuel Tank Sealer Kit KBS Fuel Tank Sealer Kit contains all of the essential products to completely clean, treat, and seal a 25-gallon automotive fuel tank. The complete kit is formulated to stop fuel tank rust in its tracks and then coat and seal the tank, including filling small pinholes and weld seams. The final coating is impervious to fuels, alcohol additives, and most solvents. It's a tough ceramic-like barrier against future corrosion.

KBS Fuel Tank Sealer Kit includes:
+ KBS Klean - for 'washing' and stripping away other chemicals and foreign particles
+ KBS Blast - dissolves rust and metal oxides and converts it to a zinc phosphate that is ready for coating
+ KBS Gold Standard Tank Sealer - brushable coating that leaves a rock-hard ceramic-like coating that is very resistant to salt and chemicals
+ Chemical-resistant black nitrile gloves
+ Brushes and stirring stick
+ Detailed instructions

Step 1. Klean. The KBS process involves first treating and prepping the rusty area before the final coating is applied. The surfaces must first be cleaned with the KBS Klean to strip away grease and other chemicals that will interfere with coating adhesion. Klean is water based and biodegradable and doesn't have the harsh smells and effects of solvents or chemicals. Let Klean soak but rotate the tank every minutes to ensure complete coverage. The cleaner the tank the better the adhesion so repeat until you're satisfied. The Klean process should be left to completely dry before moving to Step 2.

Step 2. Blast. Rust Blast is the actual conversion of rust into zinc phosphate state and is etched for proper paint adhesion. This step is essential for stopping the rust in its tracks and from spreading. It's also a primer for the final stage of coating, leaving behind a white powdery residue. Like the Klean it's also water based and biodegradable. For the rust conversion to be complete pour the Blast into the tank and rotate several times to ensure coverage. Rinse and allow to dry completely before sealing.

Step 3. Tank Seal. For the finishing touch, pour the KBS Tank Sealer into the tank. The Sample kit includes enough coating for a 25-gallon tank and it's formulated to be applied as a single coat. Rotate the tank to ensure complete coverage and drain the excess. It's important to not allow the Tank Seal to pool or collect so make sure it drains well. Use any excess to coat and seal the outside of the tank, especially in areas that might have leaks. Tank Seal leaves a very tough and hard surface that is impervious to most solvents, fuels, acids, and road salt. When fully cured it's flexible, allowing it to move as the tank expands and contracts. It's self-leveling too which produces an even finish that will not crack, flake, or peel and will withstand temperatures up 600*F (316*C).

Application note: The KBS process will need approximately one week to fully complete (the recommended drying time on the tank is four days). This is perfect for restoration jobs or longer builds where the car can sit for an extended period of time.

Installation Instructions

In order for the 3-step process to work correctly, you must closely follow KBS' instructions. You can view/download them here prior to receiving your order:
For a PDF of the installation instructions, click here.

Demonstration Videos


KBS Tank Seal Process -
KBS Klean and KBS Blast

KBS Tank Seal Process -
KBS Tank Seal

Due to shipping restrictions, this product can ship only via UPS Ground.
Part #: 53000
Price: $56.06 (USD) 
$65.95 (Sale - Save 15%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Upper Spring Hats/Perches (Pair) - 60mm / 16mm Pin / Square Seat Made in the USA These aluminum upper spring hats are for coil over struts with a 60mm coil over spring. The specs are listed below; match the hat specs with your spring and strut. For a proper fitment you must confirm the spring hat matches the strut pin, especially on high-end motorsport struts.

Spring I.D.Strut Pin Diam.Strut Pin Seat
60mm16mmsquare

Part #: TSU998063B
Price: $50.96 (USD) 
$59.95 (Sale - Save 15%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben GT80 Plus Professional Scan Tool Tablet Platform

The GT80 PLUS by Schwaben is extremely easy to set up and even easier to use. It features a genuine Windows 8.1 operating system, Intel quad-core processor and a 10.1” LED capacitive touch display – making it your fastest, easiest solution to attaining valuable data.

This scan tool offers an amazing UI experience, giving users the ability to update with one touch, and easily navigate through menus. With the diagnostic tool connected to the vehicle’s OBD port, it automatically retrieves the VIN code. Additionally, you can manually enter the VIN to identify the model you are working on.

GT80 PLUS automatically checks and recognizes all available electronic control units on a vehicle in a matter of seconds. In addition, it instantly displays all the errors detected on the vehicle, and allows errors to be viewed and cleared with just a single click.

What is the GT80 Plus capable of?

● Compatible with current model vehicles

● Compatible with both OBDI and OBDII cars, SUVs, minivans, light-duty trucks sold worldwide

● Get access to powertrain, chassis and body systems

● Quick Test function to test most vehicle systems

● Read and clear diagnostic trouble codes and resets MIL

● View live vehicle sensors data in a text, graph and gauge format

● Merge interactive live sensor graphs for easy and intuitive diagnosis

● Live data self-learning and alarm when live data over range

● Record and playback your data logs for offline analysis

● Read and clear freeze frame data

● Run component/system bi-directional tests

● Support adaptations and control module coding

● Key coding for several vehicles

● Support the most commonly required service features like brake deactivation, service resets, and transmission adaptations

● Multi-language menus and code definitions for an international marketplace

● Code troubleshooters provide you faster and easier diagnosis

GT80 PLUS Features Actuations, Adaptations and Control Module Coding

GT80 PLUS cannot only read your codes, but it can also actuate components, run system tests, program control modules. Reading the trouble codes from your vehicle is easy. But without live data, bi-directional controls and other special functions, you may not have enough information to get the problem fixed right. It allows you to use the scan tool temporarily activate or control a vehicle system or component. With GT80 PLUS, the check of electronic components such as switches, sensors, relays, & actuators is made a simple task, saving your time and labor costs. It gives you the ability to ‘flash’ a control unit with new program data. Provided that a module can be re-coded, GT80 PLUS allows for the coding and programing of a replacement control module or changing previously stored incorrect coding as expensive factory tools do. In addition, it lets you recode the transponder in a mechanical key or key FOB. When a key for a modern vehicle is replaced, the new unit will often turn the mechanical switch but fail to initialize the system or start the vehicle. If this occurs, it is typically because the transponder inside the key has not been coded to that particular system.

With these factory tool like functions, GT80 PLUS is an invaluable tool that allows you to perform complicated repairs faster and easier, boosting your bottom line and customer satisfaction.

GT80 PLUS shows live vehicle sensors data in text, graph and gauge format and allows you to focus on any suspicious or symptom-specific data parameters. It’s powerful graphing capability gives you the ‘real picture’ of what’s going on in the vehicle. You can view up to 4 parameter graphs simultaneously.  Still you can merge multiple PID plots into one coordinate, so you can easily see how they affect each other, providing you with the most comprehensive and functional look at live data possible.

ã¢â‚¬â¢         USA Coverage

Chrysler,Ford,GM,Brazilian GM(For Brazilian Market Only)

ã¢â‚¬â¢         ASIA Pacific coverage

Au Ford (For Australian Market Only), Acura, Brilliance, BYD, Chery, Daewoo, Geely, Great Wall, Honda, Holden (For Australian Market Only), Hyundai, Infiniti, Isuzu, JAC, Kia, Lexus, Mazda, Mitsubishi, Nissan, Perodua, Proton, Scion, Subaru, Suzuki, Toyota

ã¢â‚¬â¢         European Coverage

Audi, Bentley, BMW, Bugatti, EU Ford, Jaguar, Land Rover, Maybach, Mercedes Benz, Mini, Opel, Porsche, Rolls-Royce, Saab, Seat, Skoda, Smart, Sprinter, Vauxhall, Volvo, VW

ã¢â‚¬â¢         French & Italian Coverage

Abarth, Alfa-Romeo, Citroen, Dacia, Fiat, Lancia, Maserati, Peugeot, Renault

Note: GT80plus has 18 months free updates after registration.

Tool must be registered to receive update notices.  

This scan tool works with all OBD I and OBD II BMW vehicles.

 

Part #: gt80plusKT
Price: $1699.95 (USD) 
$1999.95 (Sale - Save 15%)
Free Shipping Free Shipping
Quantity:   
Tire Totes Wheel Felts

Benefits:

  • Protects rims from knicks and scratches
  • Additional level of protection from tire and brake residue for your cloths and vehicle interior
  • One size fits all Tire Tote bags
  • Durable .25" thick felt pad
  • Easy to install
  • Large ventilation hole


Kit Includes: - Two Wheel Felts
If you wish to protect both front and back of thewheel buy one kit per wheel, if you only want to protect the front face ofwheel, buy one kit per pair of wheels.
(Tire Totes sold separately)

Dimensions:
 • 
1/4" x 20"
 • 
Fits with Tire Tote product
 
  (22" through 29" tire)

Part #: 00037
Price: $28.86 (USD) 
$33.95 (Sale - Save 15%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Stealth Bulb Set -Single Filament Front/ Rear for BMW with Offset Pins Stealth Bulb Set -Single Filament Front & Rear for BMW with Offset Pins. These are the are the best concealment bulbs on the market; invisible in clear lenses when off and bright amber when on. No more ugly orange egg yolk look in your clear corners. Check your stock bulb and compare to photo before ordering.
Part #: TMS3658
Price: $25.46 (USD) 
$29.95 (Sale - Save 15%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
AC Schnitzer Emblem Foil

AC Schnitzer Emblem Foil - ca. 600mm x 113mm - self adhesive vinyl

Schnitzer got it's start racing BMW's in 1967 and has since gone onto win many championships in DTM, WTCC and other touring car series. In 1987 AC Schnitzer started manufacturing custom high performance products for BMW's using their knowledge from years of racing and winning with BMW's. AC Schnitzer offers the highest quality components for your BMW.

Part #: 51141008
Price: $28.88 (USD) 
$44.00 (Sale - Save 34%)
$44.00
Limited Qty Sale
Quantity:   
Tool - Manual Transmission Drain Plug Tool - 17mm To remove the transmission drain plug on a manual transmission requires a special male, hex-drive socket. This BMW drain plug removal tool will fit any 1/2" drive ratchet.
Part #: 143294
Price: $11.86 (USD) 
$13.95 (Sale - Save 15%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Tool - 46mm 3/4 Drive 6-point Socket Commonly used for the removal and installation of front wheel bearings on many BMWs. This socket works with the wheel bearing nut with BMW part number 31 21 1 128 336 -- used with the following front wheel bearings:

Front Wheel Bearings that use 31 21 1 129 336 nut:
BMW part#Fitment / Chassis
31 21 1 468 753E30 M3 (1988-1991), E24 6 ser (thru 1989)
E28 5 ser (1982-1988)
31 22 6 757 024
31 22 1 468 926
E36 3 ser, including M3 (1992-1999)
E46 3 ser, except M3 (1999-2005)
E32 7 ser (1988-1994)
E34 5 ser (11/1991-1995)
E31 8 series (3/1992 on)
31 22 2 229 501E46 M3 (2001-2006)
Part #: TMI9910M46
Price: $58.61 (USD) 
$68.95 (Sale - Save 15%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Genuine BMW Coffee Mug & $100 Turner Motorsport Gift Certificate Special Gift Package! This BMW holiday gift package includes a $100 Turner Motorsport gift certificate (the perfect gift for any BMW enthusiast) and a Genuine BMW ceramic coffee mug. That's essentially a free authentic BMW coffee mug to give for that BMW lover on your shopping list.
Part #: BMW-MUG-100TMS
Price: $100.00 (USD) 
$116.95 (Sale - Save 14%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
StopTech Calipers ST60 - Race Brake Pad Set - Pagid RS29 Yellow Yellow RS 19: Racing A favorite of BMW's Motorsport engineers, the Pagid RS19 compound is an endurance pad based on the RS14 Black but with less friction to improve modulation and low pedal effort. These pads work best in a heat range up to 1,100* F. The combination of friction levels, fade stability, and long life for pads and rotors makes this a favorite for club and HPDE drivers.

This pad set fits the following StopTech 6-piston calipers:
ST60

ST60 calipers are found in many StopTech Big Brake Kits, including these BMW models:
2008-2012 E82 BMW 128i 135i 1M Coupe
1999-2005 E46 BMW M3
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2013 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
2007-2013 E93 BMW 328i 335i M3 - Convertible
2012+ F30 BMW 328i 335i - Sedan
1997-2003 E39 BMW 525i 528i 530i 540i M5
2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i M5
2010+ F07 BMW 535i GT, 535i xDrive GT, 550i GT, 550i xDrive GT
2011+ F10 BMW 528i 535i 535i xDrive 550i 550i xDrive M5
2004-2011 E63 BMW 645ci 650i M6
2012+ F13 BMW 640i 650i
2002-2008 E65 BMW 745i 745li 750i 750li 760i 760li
2009+ F01 BMW 740i 740li 750i 750li 750i xDrive 750li xDrive 760li
2004-2010 E83 BMW X3 2.5i X3 3.0i X3 3.0si
2011+ F25 BMW X3 xDrive28i X3 xDrive35i
2000-2006 E53 BMW X5 3.0i X5 4.4i X5 4.6is X5 4.8is
2007-2013 E70 BMW X5 3.0si X5 4.8i X5 xDrive30i X5 xDrive35d X5 xDrive35i X5 xDrive48i X5M
2008+ E71 BMW X6 xDrive35i X6 xDrive50i X6M
2003-2008 E85 BMW Z4 M Roadster M Coupe
2009+ Z4 BMW Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
Part #: TMS2514
Price: $389.65 (USD) 
$432.95 (Sale - Save 10%)
Free Shipping Free Shipping
Quantity:   
Tool - 32mm / 36mm Fan Clutch and Oil Filter Cap Open-End Wrench Why buy two tools when you can get one that will do many jobs like this open end wrench? It is great for removing and installing the fan clutch and plastic oil filter cap. Also works great for removing and installing the VAN0S solenoid on M50 engine family. Use the same tools the Turner Motorsport techs use!
Part #: TMI9910334
Price: $44.39 (USD) 
$64.95 (Sale - Save 32%)
$64.95
Limited Qty Sale
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Minichamps - Turner Motorsport #94 BMW Z4 GTD 2014 IMSA Champion 1:43 Limited Edition 1 of 300.

Celebrate a piece of Turner Motorsport history with this Limited Edition Minichamps 1:43 resin model of the BMW Z4 GTD which won the 2014 IMSA Tudor United Sportscar Championship!This Z4 GTD was driven by Dane Cameron and Markus Palttala to both the driver and team titles! This car won at tracks such as Laguna Seca, Watkins Glen, Road America and Virginia International Raceway (VIR). Complete with the official livery including sponsors H&R Springs, Northwest, Borla, Escort, Motul, Continental Tires and Recaro. This 1:43rd scale model is extremely detailed and manufactured by the renowned Minichamps.

This limited edition collectors item makes the perfect gift this holiday season. Get the BMW race fan or enthusiast on your list the No. 94 Turner Championship Z4.
Part #: TMS222774
Price: $72.21 (USD) 
$84.95 (Sale - Save 15%)
Free Shipping Free Shipping
Quantity:   
Differential and Transmission Oil Drain and Fill Combo Wrench This multi-functional combination wrench features a 14mm Allen hex socket at one end and a 17mm hex wrench at the other. This allows you to perform drain and fill procedures on your BMW with one tool! The 14mm Allen is common for drain and fill plugs on BMW differentials. This wrench is ideal because many BMWs with spare tire wells do not have adequate space to fit a standard 14mm Allen socket and ratchet. The 17mm hex is common for transmission drain and fill plugs. Other BMW transmissions may also use a 14mm female hex / Allen plug.
Part #: 2760
Price: $50.96 (USD) 
$59.95 (Sale - Save 15%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben Low Profile 2 Ton Aluminum Floor Jack With 12

 A complete set offered to ensure that the proper lifting techniques are at use. It's never wise to work under a vehicle supported by only a floor jack, with this complete kit you get a complete matching set to get the job done safe and fast.

  • Special low profile thick frame side plates and reinforced lift arm for added strength and use.
  • Wide track front wheels help provide chassis torsion control and durability.
  • Angular positioned pump pistons provide maximum effective pump stroke even when jack is completely under the vehicle.
  • Ball bearing mounted rear swivel caster wheels for easy maneuverability.
  • Side mounted handles for carrying and easy positioning.
  • Overload and bypass safety valve prevents jack overload and over extension.
  • Two piece quick release padded handle for storage or transport.
  • Dual piston's for 5 pump full extension

Details:

  • Jack Capacity 2 Ton
  • Max Lift Height 20"
  • Low Height 3.25"
  • Chassis Length 26.5"
  • Overall Width 13"
  • Saddle Diameter 4.5"
  • Handle Lenght 50"
  • Shipping Weight 50 lbs

Schwaben 12" wheel Stands:

These stands are made from special EPS foam with an anti-skid coating.

Won't scratch or mark your floors!

Lightweight at only 5 lbs each, makes these stands easy to carry and maneuver.

Works on virtually any surface, including sand!

Will not scoot, slip or slide, no matter the surface.

Specs:

12" tall,15.75" long,12" wide.

Works on wheel diameters from 25 to 30 inches.

Part #: 011362sch01aKT1
Price: $293.21 (USD) 
$390.95 (Sale - Save 25%)
Quantity:   
Schwaben Low Profile 2 Ton Aluminum Floor Jack With Aluminum 3-Ton Jack Stands

Having a low profile floor jack can be a great asset for your garage, perfect for those with a lowered car as well as those that aren't. Most car owners with a lowered vehicle have been in the position of their floor jack not making the clearance needed, the low profile jack is the answer. 

  • Dual pump pistons raises the saddle to maximum height in only 5 pump strokes, with minimum effort.
  • Special low profile thick frame side plates and reinforced lift arm for added strength and use.
  • Wide track front wheels help provide chassis torsion control and durability.
  • Angular positioned pump pistons provide maximum effective pump stroke even when jack is completely under the vehicle.
  • Ball bearing mounted rear swivel caster wheels for easy maneuverability.
  • Side mounted handles for carrying and easy positioning.
  • Overload and bypass safety valve prevents jack overload and over extension.
  • Two piece quick release padded handle for storage or transport.

Details:

  • Jack Capacity 2 Ton
  • Max Lift Height 20"
  • Low Height 3.25"
  • Chassis Length 26.5"
  • Overall Width 13"
  • Saddle Diameter 4.5"
  • Handle Lenght 50"
  • Shipping Weight 50 lbs

The ultra light Schwaben jack stands only weigh 4.7 lbs each. Fit and finish on these stands just shows how much pride in workmanship goes into our stands.These stands are all aluminum construction with heavy-duty  flanged bases to safely stabilize loads. Features 6 locking positions for a secure load in multiple heights. The load pin is extra heavy duty at .584 in. diameter and features a posi lock ball to insure pin stays in place.  

Min. Height is 10.6".

Max Height is 15.4".

Large 7" diameter base.

Outer support tube is 2-1/8" in diameter.

Part #: 011362sch01aKT
Price: $266.92 (USD) 
$355.90 (Sale - Save 25%)
Quantity:   
Schwaben 2-Pc 67

These ramps never scoot, slip or slide while rolling onto the ramps.All that said means these ramps are easy to drive up on and very safe. Our Schwaben ramps will never scratch or blemish your floors.

Having ramps to use offers more than just convenience, it offers safety. Laying under a car working is much easier to do knowing the car is resting the wheels on a firm surface.

Please refer to chart below to see if these 67" Schwaben ramps are right for you vehicle.

1. Take a yardstick, and wedge it under the front edge of front tire.

2. Raise it up until it hits the underside of your car( the spoiler)

3. Measure from the tip of the yardstick to the ground, vertically.

 67 " long,14" wide, 10" lift height, at 15 lbs each and a low 10.8 degree incline.

If your measurement is 7.25" or greater, you can clear these ramps with no problem. 

These extensions will lower your approach angle to 6.6 degrees. Once you get the car into place, you can remove the extensions for more working room under the vehicle. One set holds up to 3000 lbs.

For increased safety, use wheel chocks with all Schwaben Ramp products.

Part #: 006160sch01aKT
Price: $356.25 (USD) 
$475.00 (Sale - Save 25%)
Quantity:   
Schwaben 16oz Ball Peen Hammer The 16oz Ball Peen hammers are constructed with a fiberglass handles with a molded rubber grip. The heads are made from drop forged steel to avoid damage and to stand up to long years of impacts. Each side is precision ground for accurate striking points.
Part #: 016805SCH03A
Price: $8.21 (USD) 
$10.95 (Sale - Save 25%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben 36oz Dead Blow Hammer The 36 oz dead blow hammer is built with steel shot internals that delivers a stronger force of impact and prevents rebound. The hammer itself is all built from a high-impact poly jacket that encases the head and handle. This hammer allows you to hammer softer metals, such as aluminum, without damaging the surface or the part itself. The handle has a diamond-shaped grip pattern to prevent your hands from slipping and sliding, even with your hands are covered with oil.
Part #: 016805SCH04A
Price: $11.21 (USD) 
$14.95 (Sale - Save 25%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Liqui Moly Manual Transmission / Differential Fluid 85w90 - 1 Liter

Interval oil changes are often recommended for manual transmissions to ensure long-term reliability and maximum wear prevention. Fresh oil will prevent small amounts of metallic build up from preventing fluid flow and clogging filters and narrow channels. 

Check your owner's manual to determine when it is best to flush your system and what type and weight fluid to use when re-filling your system. 

This 85w90 weight oil's multi-viscosity are perfect for ensuring protection in all climates and its synthetic composition allows for smoother shifts.

APPROVALS:

  • API GL5
  • MAN 342 Typ M1
  • MB-Freigabe 235.0
  • MIL-L 2105 D
  • ZF TE-ML 16C
  • ZF TE-ML 17B
  • ZF TE-ML 19B
  • ZF TE-ML 21A
  • ZF Freigabenummer ZF000695

Liqui-Moly is a German chemical company that offers top of the line engine oils, additives, and car care products that are designed to extend the life of your engine and ensure the best lubrication and cleanliness off engine and transmission components possible. With more than 50 years of experience and reviews across the world from magazines and race teams, Liqui-Moly proves time and time again why they are one of the most innovative lead forces of performance automotive chemicals in the world.

Part #: 20010
Price: $8.96 (USD) 
$9.95 (Sale - Save 10%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Turner BMW 5mm Wheel Spacers (Pair) - Most BMWs (see applications)

5MM (.20 inch) Wheel Spacer for BMW E24, E28, E30 M3, E31, E32, E34, E36, E38, E46, E60, E63, E82, E83, E87, E90, E91, E92, E93 (E9X), Z3, Z4

Wheel spacers are the ideal solution to resolve a number of fitment and aesthetic problems --

  • Correct wheel offset issues
  • Achieve a flush fitment instead of the "tucked under" look
  • Clearance the wheel from contact with other components (suspension, brakes, etc).
  • Improve handling and stability by increasing track width

A spacer fits between the wheel and the hub assembly and pushes the wheel out by the thickness of the spacer. Our wheel spacers are compatible with almost any type of BMW wheel and are a direct fit to the wheel hub (see below for any fitment notes). Longer wheel bolts or wheel studs are required.

These latest generation of the Turner Motorsport Wheel Spacers represent a total redesign of the wheel spacer concept - a ground-up, clean sheet design based on our years of BMW service and motorsports. We took everything we have learned from our service technicians, customers, and race team crew and built the spacer to beat all spacers. We've been in the BMW wheel spacer business probably longer than anybody and when it came time to make our own spacers, a basic spacer design just wouldn't do. We had to make a spacer that is light weight (for lower unsprung mass), has a tough and durable coating to last through our New England winters, is easily removed (your mechanic will thank you), and is precisely engineered and manufactured for a proper fit on the hub and in the wheel. You won't find a better engineered wheel spacer on the market!

Turner Wheel Spacer Features --
+ hub-centric design, 1-piece spacer
+ precise tolerance fitment thanks to CAD process and CNC mill machine
+ aerospace grade aluminum  light weight but very strong with a high resistance to corrosion
+ additional military-spec hardcoat for further corrosion resistance
+ innovative Quick Release pockets for easy removal (better than a chamfered back edge)
+ laser engraved size and part number for easy identification
+ stealthy anthracite or black color
+ extended bolt sets in factory-matching black or bright silver finish available (wheel stud kits also available)
+ Turner Motorsport track and street tested!
+ Made in the USA

Extended Wheel Bolts
Longer wheel bolts or wheel studs are required for all BMW wheel spacers. Spacers cannot be used with stock bolts. Our extended lug bolts are a very high quality and high grade steel lug bolt (grade 10.9). We offer two finishes to get you just the right look with your wheels - black zinc to maintain a factory BMW appearance or a bright zinc nickel finish to go with polished wheels. Zinc finishes are designed to withstand 700 hours of salt spray testing.

Spacer Specs:
(click to expand)
Spacer Specs:
bolt pattern:5 x 120
center bore:72.6mm
hubcentric?yes
wheel pad size:normal

Fitment Notes:
(click to expand)
5mm spacer note: a 5mm spacer sits on the existing hub lip but leaves less than 5mm of lip for the wheel to rest on. Therefore, wheels that have a bevel around the center bore will not engage the hub lip and may reseult in a vibration.

Year & Model Applications
(click to expand)
2008-2012 E82 BMW 128i 135 1M
1988-1991 E30 BMW M3
1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
2007-2012 E93 BMW 328i 335i M3 - Convertible
1976-1981 E12 BMW 528i 530i
1982-1988 E28 BMW 524td 528e 533i 535i 535is M5
1989-1995 E34 BMW 525i 530i 535i 540i M5
2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i M5
1982-1989 E24 BMW 633csi 635csi M6
2004-2010 E63 BMW 645ci 650i M6
1981-1987 E23 BMW 733i 735i
1988-1994 E32 BMW 735i 735il 740i 740il 750il
1995-2001 E38 BMW 740i 740il 750il
1990-1999 E31 BMW 840i 840ci 850i 850ci 850csi
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
2009-2016 Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
Part #: TWH9905005
Price: $67.96 (USD) 
$79.95 (Sale - Save 15%)
Free Shipping Free Shipping
on orders $199 and up
Turner Motorsport Z4 Racecar T-Shirt - Black Welcome to 2014! Introducing our new Z4 GTD race car. The brand new Turner Motorsport BMW Z4 GTD competing in the TUDOR United SportsCar Championship comes to life on high quality 100% cotton black t-shirt. The shirt features some impressive illustrations of both the front and rear of the extremely wide and curvy Z4. The graphics pop off the shirt transitioning from a subtle gray scale to the Turner blue and yellow.

Get yours today, these are limited in quantity and won't last long. Choose size below.
Part #: G200-BK
Price: $21.21 (USD) 
$24.95 (Sale - Save 15%)
Free Shipping Free Shipping
on orders $199 and up
Turner Motorsport Brake Bleeder Bottle The Turner Motorsport Brake Bleeder Bottle is the perfect companion when bleeding your brakes! The bottle features a nice long flexible hose so fitment over the bleeder nipple is a snap. These bottles also offer either a magnetic mount or a cable lanyard, so you can hang the bottle or stick it to the brake rotor, this leaves your hands-free to work with your tools. It works great with our Power Brake Bleeder
Part #: TMS1196
Price: $14.02 (USD) 
$16.49 (Sale - Save 15%)
Free Shipping Free Shipping
on orders $199 and up
Carbon Fiber Roundel Emblem Decal Set - Hood/Trunk/Wheels/Steering Wheel Help your BMW stand out from the crowd with our colored Roundel emblem covers. Whether you are looking to match your paint color, hightlight your interest in motorsports, or freshen the look of your car, Roundel decals offer a great way to personalize your BMW. These easy to install vinyl decals adhere over the existing Roundel emblems. The kit includes colored quadrants to cover the hood emblem, trunk emblem, steering wheel and 4 wheel emblems - and fender emblems for Z3 and Z4. These are made to withstand all weather conditions and are removed with ease if required.

Currently we offer the following carbon fibre style roundel stickers: Printed Carbon Fiber - Black, Dynamic Carbon Fiber - Silver. Sorry, Dynamic Carbon Red, Dynamic Carbon Black, and Dynamic Black/Silver are no longer available.

Note: These are vinyl overlays for the existing roundels. Actual roundel emblems are not included. We have BMW Roundel emblems available here.

This item fits the following BMWs:
These emblem covers fit all BMW years and models including:
E30, E36, E46, E90, E92, E34, E39, E60, F10, E63, E38, E65, F01, X3, X5, X6, Z3, Z4 and more.
Part #: TMS20551
Price: $25.46 (USD) 
$29.95 (Sale - Save 15%)
Free Shipping Free Shipping
on orders $199 and up
Daytona 2014 Livery Decal Set for Fujimi BMW Z4 GT 2013 Model Build your own Turner Z4 GTD / GT3 1:24 Scale Model! This decal sheet contains livery graphics to model the Turner Motorsport BMW Z4 as raced at the 2014 Daytona 24 hours. Decals are die cut for accuracy and fitment. The livery decals were created using our original livery design files, so we can vouch for its overall accuracy. The completed model looks incredible!

This graphics decal set is specifically designed for the Fujimi brand 1/24th scale BMW Z4 2013 kit. Model sold separately. Assembly required
Part #: MSH-94
Price: $17.00 (USD) 
$20 (Sale - Save 15%)
Free Shipping Free Shipping
on orders $199 and up
Turner BMW 17.5mm Wheel Spacers (Pair) - Most BMWs (see applications)

17.5MM (.69 inch) Wheel Spacer for BMW E24, E28, E30 M3, E31, E32, E34, E36, E38, E46, E60, E63, E82, E83, E87, E90, E91, E92, E93 (E9X), Z3, Z4

Wheel spacers are the ideal solution to resolve a number of fitment and aesthetic problems --

  • Correct wheel offset issues
  • Achieve a flush fitment instead of the "tucked under" look
  • Clearance the wheel from contact with other components (suspension, brakes, etc).
  • Improve handling and stability by increasing track width

A spacer fits between the wheel and the hub assembly and pushes the wheel out by the thickness of the spacer. Our wheel spacers are compatible with almost any type of BMW wheel and are a direct fit to the wheel hub (see below for any fitment notes). Longer wheel bolts or wheel studs are required.

These latest generation of the Turner Motorsport Wheel Spacers represent a total redesign of the wheel spacer concept - a ground-up, clean sheet design based on our years of BMW service and motorsports. We took everything we have learned from our service technicians, customers, and race team crew and built the spacer to beat all spacers. We've been in the BMW wheel spacer business probably longer than anybody and when it came time to make our own spacers, a basic spacer design just wouldn't do. We had to make a spacer that is light weight (for lower unsprung mass), has a tough and durable coating to last through our New England winters, is easily removed (your mechanic will thank you), and is precisely engineered and manufactured for a proper fit on the hub and in the wheel. You won't find a better engineered wheel spacer on the market!

Turner Wheel Spacer Features --
+ hub-centric design, 1-piece spacer
+ precise tolerance fitment thanks to CAD process and CNC mill machine
+ aerospace grade aluminum  light weight but very strong with a high resistance to corrosion
+ additional military-spec hardcoat for further corrosion resistance
+ innovative Quick Release pockets for easy removal (better than a chamfered back edge)
+ laser engraved size and part number for easy identification
+ stealthy anthracite or black color
+ extended bolt sets in factory-matching black or bright silver finish available (wheel stud kits also available)
+ Turner Motorsport track and street tested!
+ Made in the USA

Extended Wheel Bolts
Longer wheel bolts or wheel studs are required for all BMW wheel spacers. Spacers cannot be used with stock bolts. Our extended lug bolts are a very high quality and high grade steel lug bolt (grade 10.9). We offer two finishes to get you just the right look with your wheels - black zinc to maintain a factory BMW appearance or a bright zinc nickel finish to go with polished wheels. Zinc finishes are designed to withstand 700 hours of salt spray testing.

Spacer Specs:
(click to expand)
Spacer Specs:
bolt pattern:5 x 120
center bore:72.6mm
hubcentric?yes
wheel pad size:normal

Year & Model Applications
(click to expand)
2008-2012 E82 BMW 128i 135 1M
1988-1991 E30 BMW M3
1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
2007-2012 E93 BMW 328i 335i M3 - Convertible
1976-1981 E12 BMW 528i 530i
1982-1988 E28 BMW 524td 528e 533i 535i 535is M5
1989-1995 E34 BMW 525i 530i 535i 540i M5
2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i M5
1982-1989 E24 BMW 633csi 635csi M6
2004-2010 E63 BMW 645ci 650i M6
1981-1987 E23 BMW 733i 735i
1988-1994 E32 BMW 735i 735il 740i 740il 750il
1995-2001 E38 BMW 740i 740il 750il
1990-1999 E31 BMW 840i 840ci 850i 850ci 850csi
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
2009-2016 Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
Part #: TWH9905018
Price: $83.26 (USD) 
$97.95 (Sale - Save 15%)
Free Shipping Free Shipping
on orders $199 and up
Replacement StopTech 355x32mm Rotors for Big Brake Kits - Left & Right Pair Replacement StopTech AeroRotor for big brake kits - 355mm diameter, 32mm thickness. Choose from either slotted or cross-drilled and standard finish or corrosion-resistant zinc coating. Comes with new mounting hardware to re-use the original StopTech mounting hat. This is for a Left and Right Pair.

Size: 355x32mm
Type: Gas-Slotted or Cross-Drilled
Finish: standard finish (no coating), or zinc coating
Fitment: Left and Right Pair
Applications: Fits any StopTech Big Brake Kit that uses the 355x32mm disc.
Part #: ST0PTECH355X32
Price: $604.71 (USD) 
$671.9 (Sale - Save 10%)
Replacement StopTech 355x35mm Rotors for Big Brake Kits - Left & Right Pair Replacement StopTech AeroRotor for big brake kits - 355mm diameter, 35mm thickness. Choose from either slotted or cross-drilled and standard finish or corrosion-resistant zinc coating. Comes with new mounting hardware to re-use the original StopTech mounting hat. This is for a Left and Right Pair.

Size: 355x35mm
Type: Gas-Slotted or Cross-Drilled
Finish: standard finish (no coating), or zinc coating
Fitment: Left and Right Pair
Applications: Fits any StopTech Big Brake Kit that uses the 355x35mm disc.
Part #: ST0PTECH355X35
Price: $621.00 (USD) 
$690 (Sale - Save 10%)
Free Shipping Free Shipping
on orders $199 and up
Schwaben Axle Impact Socket Kit - 6 Pieces

When it comes to the torque found on axle nuts you're already looking at using a breaker bar or impact gun not to mention the corrosion collected over the years. The safest approach is using impact socket, since they are built with the strength needed to avoid breaking under pressure.

Features:

  • Heavy duty ½ inch-drive sockets and drivers have extra thick alloy steel walls, and take a beating that would destroy normal sockets
  •  Durable black oxide coating wipes clean easily and resists rust
  • Contains three 12-point sockets for a sure grip on the most common sized axle nuts, plus three hex drives for removing common hex-head plugs and fasteners
  • Conveniently packaged in a blow molded case, this set will please the most demanding professional technician or discriminating prosumer

Kit includes:

  • 30mm, 32mm, and 36mm - 12-point axle nut sockets - ½" drive

  • 14mm, 17mm, and 19mm hex head drive axle shoulder bolt sockets - ½" drive

Part #: DS-6P
Price: $37.46 (USD) 
$49.95 (Sale - Save 25%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben Round Magnetic Parts Tray, 4 3/8

An easy way to hold fasteners without the risk of knocking them over and trying to find them.

 

Part #: PM-110
Price: $7.46 (USD) 
$9.95 (Sale - Save 25%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben BMW 14/17mm Service Wrench

Take one wrench, not two to your next fluid service. The Schwaben Service Wrench fits both crankcase and drain plugs in BMW, Mercedes, and other European vehicles.

Features:

  • Six-point 17mm box end won’t round off engine oil drain plugs
  • Hardened 14mm hex at the opposite end fits many transmission fill and drain plugs
  • Made of vanadium steel with polished chrome finish
  • Long handle for added leverage.

Fits most vehicles with M10, M20, M30, M42, M44, M50, M52, M54, M56, M70, S14, S38, S50, S52 and S70.

Application note: Please verify the exact size of the transmission and differential plugs in your car. BMW has used both 14 and 17mm plugs in some vehicles. 

Part #: ecst007
Price: $22.46 (USD) 
$29.95 (Sale - Save 25%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben 1/4 A convenient ratchet with 1/4" & 3/8" drive options. The perfect ratchet when you're on the go, reducing the amount of tools you need to carry in case of a road side repair.
Part #: P34472-32
Price: $9.71 (USD) 
$12.95 (Sale - Save 25%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben Mini Tubing Cutter

This great little tubing cutter is a must have in tight work spaces. Large adjusting knob for easier adjustment. This tool only needs 1-1/4" of space around tube.

Features:

  • Handles tubing from 3-16mm (1/8"-5/8") O.D.
  • For copper, aluminum, brass and most thin wall steel.
  • Grooved rollers allow flared tube to be cut directly below the flare.
Part #: 006644SCH01A
Price: $5.21 (USD) 
$6.95 (Sale - Save 25%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben Battery Post And Terminal Brush

Battery Terminal brush uses the external brush to clean the cable clamps and the internal brush to clean the battery posts. Made from high Impact plastic body to eliminate tool corrosion.

Keeping the connection clean is an important part of making sure your battery is transferring the proper voltage during startup.

Part #: 006348SCH01A
Price: $3.71 (USD) 
$4.95 (Sale - Save 25%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben 40

Having a creeper can make working under the car much easier and more comfortable, roll in and out, padding, and keeping those clothes a bit cleaner. 

 

 Features:

  • Thick fully padded leatherette cover.
  • 40" long with heavy-duty metal support frame.
  • 1"" steel tube frame.
  • Four position adjustable headrest.
  •  Six 2 1/2"oil-resistant rollers.
  • Powder coated frame to resist rusting.
  • Overall dimensions: 17" x 40" X 4"
  • Ground clearance: 1-1/2"
  • Ball bearing swivels on wheels.
  • 250lb capacity.
Part #: 005941SCH01A
Price: $44.96 (USD) 
$59.95 (Sale - Save 25%)
Quantity:   
Schwaben Locking Service Cart

An important factor when it comes to automotive work other than having the right tool for the job is how to keep those tools organized. The locking Service cart really comes in handy when you need to keep the tools you're using in place, but don't want to leave them out for theft.

 

Features:

  • Thru tray frame construction for stable support
  • 3" deep locking drawer with full extension roller bearing drawer slides
  • Chrome plated 16 gauge box frame and handles
  • 350 lbs load capacity supports heavy tools and equipment
  • Large, easy to maneuver 4" ball bearing swivel casters (2 are locking)
  • Beautiful & durable high gloss black powder coated finish
  • Height  - 35.3"
  • Length  - 30"
  • Depth - 16"
  • Weight  - 64.45lbs
Part #: 006692SCH01A
Price: $134.96 (USD) 
$179.95 (Sale - Save 25%)
Free Shipping Free Shipping
Quantity:   
Schwaben 3/8

A professional quality flex ratchet features a fine satin finish designed for durability and easy clean up.

Features:

  • Special designed 72T gear mechanism
  • 5 degree of handle movement between gears 
  • Flex head has 7 detent positions in a 180 degree swing
  • Push button release holds socket tight until you are ready to release
  • Ratchet is a full 290mm ( 11") long for extra leverage.

Limited Lifetime Warranty

Part #: 005981SCH01A
Price: $22.46 (USD) 
$29.95 (Sale - Save 25%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben 9 Piece Scraper, Hook And Pick Set

Some of the most popular  uses are carbon cleaning/scraping, picking out o-rings, snap rings and clips.This kit features large and small picks, hooks and a 1" wide scraper. This 9pc set should be part of everyone's tool assortment.

Features:

  •  3" Blade MINI Awl, 90°, Hook, and Curve
  • 6" Blade Awl, 90°, Hook, and Curve
  •  6" x 1" wide scraper
Part #: 008504SCH01A
Price: $16.46 (USD) 
$21.95 (Sale - Save 25%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben Coolant Refill/Air Purge Tool

When it comes to BMW's we all know the weak point is commonly in the cooling system, many models proving hard to bleed the air pockets out after the refresh. The coolant refill tool solves this problem, ensuring that you get an air pocket free fill. The entire task is as simple as draining the system like normal, reinstalling the drain plugs and hooking the tool up to your refill location. The reason this tool works so well is due to the venturi valve, it converts air pressure from the compressor to vacuum inside the cooling system, then with a twist of a valve sucks coolant right into the system using the vacuum pressure.  

This tool requires access to a standard air compressor with a minimum rating of 90 PSI (6.2 bar).  A convenient, though not required part to complete the job is a container large enough to hold the entire coolant mixture capacity for your vehicle.  This will dramatically reduce the risk of any unwanted air being drawn into the system.  This tool is designed to refill the cooling system after it has been drained.

 

Part #: 003466SCH01
Price: $57.71 (USD) 
$76.95 (Sale - Save 25%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Trailer Ramps 7

Is your trailer door ramp too steep to get your car into the trailer, 

Load your vehicle safer and easier with Schwaben trailer ramps. Our trailer ramps create a more gradual angle to prevent spoiler damage when loading and unloading vehicle into or out of trailer.

Features:

  • These ramps work on cars weighing up to 6,000 pounds
  •  Ideal for low ground clearance cars with extra wide tires.
  • Will not scratch or mark your floors!
  • Will not scoot, slip or slide no matter the surface
  • Will not damage trailer door or trailer
  • Light weight at only 15 lbs
  • Highly durable, virtually indestructible, and very stable
  • Ramps have built in straps to allow transport or ability to be hung on the wall
  • 74" long, 14" wide, 7" tall

Note: if your current stock trailer ramps have an additional fold down ramp, we suggest you either fold it up or remove it.

Part #: 006168SCH01A
Price: $279.75 (USD) 
$373.00 (Sale - Save 25%)
Quantity:   
Schwaben Deep Well Impact Socket - 30mm

This large socket is the perfect tool for axle nuts when servicing the axle shafts or wheel bearings.

Features:

  • ½-inch drive 30mm 12-point socket
  • Specially hardened to take the added abuse from a impact gun
  • Coated for added protection and so you can tell it apart from non impact rated sockets
  • 75mm depth  to accommodate many applications and different length shafts
  • Made of durable chrome moly steel
Part #: 003302SCH01A
Price: $14.96 (USD) 
$19.95 (Sale - Save 25%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben Exhaust Pipe Hanger removal Pliers

Tired of busting your knuckles from old hardened exhaust hangers?

This Schwaben tool removes the hanger by pressing on the steel hanger bracket and pulling the rubber hanger in one motion. Self centering force pin locks onto the pin while the flat paddle pulls off the rubber hanger from behind. Slim profile and a 25 degree offset works in tight areas.

Part #: 008778SCH01A
Price: $20.21 (USD) 
$26.95 (Sale - Save 25%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben Long-Reach 32mm Open End Fan Clutch Wrench This tool was specifically designed for the tight clearances needed to remove most BMW fan clutches. Its slim design lets it fit into tight areas, and the extra-long length is ideal for fan shroud clearance. 
Part #: 007701SCH01A
Price: $17.96 (USD) 
$23.95 (Sale - Save 25%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben Set Of 4 Pinch Weld Protectors

These weld protectors allow you to safely jack up your vehicle without crushing or bending any pinch welds. These will fit any jack and will work with many jack stands such as the Schwaben Aluminum Jack Stands.

Specifications:

  • 3" wide
  • 1" tall
  • Single groove top
  • Double grooved bottom
Part #: 3107838KT
Price: $29.96 (USD) 
$39.95 (Sale - Save 25%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben Cooling System Pressure Tester Kit

Are you refreshing your coolant system or having issues with coolant loss? An easy way to test your system for leaks and ensure you're able to maintain pressure without coolant loss is the Schwaben Cooling System Pressure Tester Kit. This kit has everything you need to attach and test your system: a hand operated pressure pump with an attached pressure gauge to carefully and accurately monitor the system's pressure, an attached 24" flex hose that connects with quick-couplers and adapters that tightly seal to prevent air pressure from escaping, 8 color-coded screw on radiator adapters and 4 twist on radiator caps, a temperature gauge, all needed instructions, and a sturdy blow-molded case to protect all components from damage.

This kit includes the following:

  • Hand operated pressure pump with a 0-35 psi gauge.
  • Long 24" flex hose between pump and quick coupler for adapters.
  • 12 high quality adapters for radiator
  • Temperature gauge
  • Instruction Manual
  • Blow molded case
Part #: 014710SCH01A
Price: $97.46 (USD) 
$129.95 (Sale - Save 25%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Part #: 007237sch01aktKT
Price: $44.96 (USD) 
$59.95 (Sale - Save 25%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben 6

Ensure you are getting the most accurate measurements you can with the Schwaben 6" Carbon Fiber Composite Digital Caliper. Machined components and things like shims and bearings all require very exact sizes for proper clearance and fitment. With this caliper, you can check these component's measurements quickly and accurately, down to .0005in/.01mm graduations. 

Specifications:

  • Carbon Fiber Composite Digital Caliper made from a milled carbon fiber / plastic mix
  •  Digital display with inch, metric and fractional read out 
  •  Push button conversion 
  •  4 measurements - inside, outside, depth and step 
  •  Large LCD Panel 
  •  6"/150mm range 
  •  .0005"/.01mm/1/64" resolution 
  • Powered by (1) SR44/357 Battery (included)
Part #: 019711SCH01A
Price: $10.46 (USD) 
$13.95 (Sale - Save 25%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Honest Wash Engine Bay Cleaning Kit

Make your engine bay covers and hoses shine like new with the Honest Wash Engine Bay Cleaning Kit. Dirt and grime find they're way into your engine bay and make your once-beautiful engine bay look like it hasn't been touched in years. With this kit you can have everything looking fresh off the line in no time!

Kit includes:

  • 32oz Bottle of Grease Lightning (degreaser)
  • 32oz Bottle of Cross Dressing (protective dressing)
  • 2 microfibers towels
  • 1 foam applicator 
Part #: HWKT-3
Price: $30.59 (USD) 
$33.99 (Sale - Save 10%)
Quantity:   
Honest Wash Car Show Prep Quick Detail Spray - 1 Gallon

Keep your car's shine bright with Honest Wash's Car Show Prep detail spray. Containing no acids or petroleum, this is a non-corrosive quick detailer perfect for removing light dust, dirt, and finger prints. In just a few minutes you can have your car looking great for a car show or a simple drive around town!

 

Made in the USA and is safe with PlastiDip and AutoFlex with no worry of scratching, peeling or fading.

Part #: HW03-1G
Price: $53.09 (USD) 
$58.99 (Sale - Save 10%)
Quantity:   
Honest Wash Bug Delete Bug, Tar, & Tree Sap Remover -- 32oz Easily remove the build up of dead bugs, tar, film, and tree sap from the front of your car in minutes with Honest Wash's Bug Delete. Bug Delete is strong enough to wash away the layers of contaminants without damaging any of the exterior surfaces of your vehicle. Its ingredients are non-caustic, non-corrosive, and has no harsh alkalies.
Part #: HW05
Price: $14.39 (USD) 
$15.99 (Sale - Save 10%)
Quantity:   
Honest Wash HyperMint Wash - Car Wash Soap 8oz Sample Honest Wash's HyperMint was is a concentrated soap that give off a fresh peppermint scent while efficiently lifting away dirt, grease, and grime from your vehicles paint. Made from a combination of synthetic detergents and emulsifiers, it is tough on dirt without being tough on any exterior surfaces or trim. It's high foaming formula is environmentally safe and requires only small amount of soap per wash, using on 2-8oz of soap per gallon of water.
Part #: HW01-S
Price: $3.59 (USD) 
$3.99 (Sale - Save 10%)
Quantity:   
Honest Wash Foam Sprayer Car Wash Starter Kit

Honest Wash's Foam Sprayer is perfect for covering your car in a thick layer of suds to make washing your car a breeze. Easy Connect and Disconnect with a quick release allows you to switch over to rinsing your car off in seconds. The Sprayer can be adjusted for the perfect amount of lather using the adjustable dial on the side. No pressure washer needed for this product, it connects directly to any standard garden hose.

Kit Contains:

  • Foam Sprayer
  • Fat Foamer Car Wash Soap
Part #: HWKT-9
Price: $44.99 (USD) 
$49.99 (Sale - Save 10%)
Quantity:   
Honest Wash Foam Sprayer Honest Wash's Foam Sprayer is perfect for covering your car in a thick layer of suds to make washing your car a breeze. Easy Connect and Disconnect with a quick release allows you to switch over to rinsing your car off in seconds. The Sprayer can be adjusted for the perfect amount of lather using the adjustable dial on the side. No pressure washer needed for this product, it connects directly to any standard garden hose.
Part #: HW28
Price: $35.99 (USD) 
$39.99 (Sale - Save 10%)
Quantity:   
Honest Wash Active Wax - Spray Wax 1 Gallon

Honest Wash's Active Wax is the best option for maintaining your vehicles feel and appearance in between car washes and wax applications. With a cherry scent in helps your car retain its shine and feel, while helping to protect from paint contaminants. Best used after car washes or before car shows to keep your car looking as good as possible.

Product details:

  • Provides a fresh shine and feel
  • Use in between waxing  
  • Easy to use, spray on and wipe away  
  • Lustrous cherry scent  
Part #: HW02-1G
Price: $58.49 (USD) 
$64.99 (Sale - Save 10%)
Quantity:   
Honest Wash Interior Cleaning Kit

Keep your dash, door panels, trim, and seats all looking good with the Honest Wash Interior Cleaning Kit. 

 

Kit Includes:

  • Grease Lightning (fabric cleaner)
  • Cross Dressing (plastic/rubber conditioner)
  • Glass Perfect (glass cleaner)
  • 2 microfibers towels
  • Foam applicator
Part #: HWKT-12
Price: $31.49 (USD) 
$34.99 (Sale - Save 10%)
Quantity:   
Honest Wash Complete Wax Kit

Keep your car's paint protected with Honest Wash's Complete Wax Kit. With both a foundation wax and a quick detail wax, you will be sure your car always looks as good as can be while still being protected from dirt, debris, and UV rays.

Kit includes:

  • 32oz bottle of Daily Defense Wax
  • 32oz bottle of Active Wax
  • 2 wax applicators
  • 2 plush microfiber towels
Part #: HWKT-4
Price: $49.49 (USD) 
$54.99 (Sale - Save 10%)
Quantity:   
Honest Wash Foam Applicator

Foam applicators can be used to apply a number of products to your vehicle for both interior and exterior surfaces. Great for waxes, polishes, dressings, tire shine, and more. Made with a high density foam handle and a soft foam application surface. There is a hexagon design that helps save product by using existing product as evenly and precisely as possible.

Product Details:

  • Perfect for waxing, polishing, or applying interior or exterior dressings
  • Hexagonal pattern to evenly spread product, avoiding waste
  • Soft foam will not scratch surfaces
  • Measurements: Length 4.75" , Width 2.25", Thickness 1.75"
Part #: HW24
Price: $3.59 (USD) 
$3.99 (Sale - Save 10%)
Quantity:   
Honest Wash Cross Dressing - Rubber, Plastic, & Vinyl - Cleaner & Conditioner 2oz Sample Take care of your interior and exterior plastic, rubber, and vinyl panels with Cross Dressing by Honest Wash, a multipurpose dressing that cleans, conditions, and gives your parts a glossy finish without leaving behind an oily residue. This helps prevent premature fading and aging on surfaces that have been neglected, making them look like new again.
Part #: HW30-S
Price: $2.69 (USD) 
$2.99 (Sale - Save 10%)
Quantity:   
Daily Defense Wax - High Grade Automotive Wax 32oz Restore your paint's deep gloss with Daily Defense Wax. Waxing your paint is essential to protecting the clear coat from UV Rays, road debris, and long term wear and tear. Consistently applying wax when needed will prolong the lifespan of your clear coat and finish.
Part #: HW10
Price: $20.69 (USD) 
$22.99 (Sale - Save 10%)
Quantity:   
Teddy Bear Microfiber Towel

The Teddy Bear is an ultra-thick polyester microfiber towel that will not leave behind lint and is perfect for cleaning, buffing, polishing, and more. I(t will not scratch or harm any of the vehicle's surfaces. great for even the most gentle areas needing polished and buffed.

Product Details:

  • Perfect for cleaning, buffing, polishing, & more
  • Ultra soft material will not scratch or harm surfaces
  • Lint-free polyester blend
  • Size: 16"x16" 
Part #: HW29
Price: $7.19 (USD) 
$7.99 (Sale - Save 10%)
Quantity:   
Honest Wash Chenille Microfiber Wash Mitt "The Shaggy" wash mitt is the perfect mitt to keep your paint free from scratches while still getting all the dirt and contaminants off of your paint. Normal sponges and brushes scratch your clear coat, damaging your paint more and more over time. The soft microfiber caterpillar pattern help prevent damage and is lint free. In addition, this mitt is also machine washable, letting you use, clean, and dry this mitt for years to come.
Part #: HW14
Price: $5.84 (USD) 
$6.49 (Sale - Save 10%)
Quantity:   
Honest Wash Microfiber Towel (10 pack)

The jack of all trades in the detailing world, the microfiber towel is the most used tool by far. Whether used for drying, buffing, polishing, applicating, or for just general cleeaning, you will be sure to go through a lot of these. Honest Wash can keep you stocked up with their premium lint-free microfiber towels.

Product Details:

  • Perfect for cleaning, waxing, polishing, & more 
  • Soft material will not scratch or harm surfaces 
  • Lint-free polyester blend 
  • Size: 14"x14" 
Part #: HW13-10
Price: $8.99 (USD) 
$9.99 (Sale - Save 10%)
Quantity:   
Honest Wash Car Show Prep - Quick Detail Spray 32oz

Keep your car's shine bright with Honest Wash's Car Show Prep detail spray. Containing no acids or petroleum, this is a non-corrosive quick detailer perfect for removing light dust, dirt, and finger prints. In just a few minutes you can have your car looking great for a car show or a simple drive around town!

 

Made in the USA and is safe with PlastiDip and AutoFlex with no worry of scratching, peeling or fading.

Part #: HW03
Price: $16.19 (USD) 
$17.99 (Sale - Save 10%)
Quantity:   
Honest Wash Glass Perfect - Streak-Free Glass Cleaner 1 Gallon Glass Perfect is the best cleaning choice to cover a range of surfaces including: tinted windows, windshields, side windows, mirrors, rear view mirrors, rear windows, headlights, chrome trim and grills, mag wheels, and interior panels including radio screens glass and instrument clusters. It cleans without leaving behind any streaks and completely ammonia free! Safe for PlatiDip and AutoFlex!
Part #: HW04-1G
Price: $44.09 (USD) 
$48.99 (Sale - Save 10%)
Quantity:   
Deluxe Foam Sprayer Car Wash Kit

Honest Wash's Foam Sprayer is perfect for covering your car in a thick layer of suds to make washing your car a breeze. Easy Connect and Disconnect with a quick release allows you to switch over to rinsing your car off in seconds. The Sprayer can be adjusted for the perfect amount of lather using the adjustable dial on the side. No pressure washer needed for this product, it connects directly to any standard garden hose.

Kit Contains:

  • Foam Sprayer
  • Fat Foamer Car Wash Soap
  • Microfiber Wash Mitt
  • Waffle Weave Drying Towel
  • 3.5 Gallon Bucket
Part #: HWKT-8
Price: $62.99 (USD) 
$69.99 (Sale - Save 10%)
Quantity:   
Honest Wash Microfiber Towel (1 pack)

The jack of all trades in the detailing world, the microfiber towel is the most used tool by far. Whether used for drying, buffing, polishing, applicating, or for just general cleeaning, you will be sure to go through a lot of these. Honest Wash can keep you stocked up with their premium lint-free microfiber towels.

Product Details:

  • Perfect for cleaning, waxing, polishing, & more 
  • Soft material will not scratch or harm surfaces 
  • Lint-free polyester blend 
  • Size: 14"x14" 
Part #: HW13
Price: $1.16 (USD) 
$1.29 (Sale - Save 10%)
Quantity:   
Honest Wash Active Wax - Spray Wax 2oz Sample

Honest Wash's Active Wax is the best option for maintaining your vehicles feel and appearance in between car washes and wax applications. With a cherry scent in helps your car retain its shine and feel, while helping to protect from paint contaminants. Best used after car washes or before car shows to keep your car looking as good as possible.

Product details:

  • Provides a fresh shine and feel
  • Use in between waxing  
  • Easy to use, spray on and wipe away  
  • Lustrous cherry scent  
Part #: HW02-S
Price: $2.69 (USD) 
$2.99 (Sale - Save 10%)
Quantity:   
Honest Wash Mud Cutter Off-Road Truck Wash Soap - 8oz Sample Mud Cutter from Honest Wash is perfect for removing thick layers or dirt, clay, and mud from your vehicle's surface after mudding or driving off-road and on job sites. Using both natural and synthetic detergents, it can remove the toughest contaminants without removing waxes or sealants. Washes while giving off a succulent orange scent.
Part #: HW31-S
Price: $3.59 (USD) 
$3.99 (Sale - Save 10%)
Quantity:   
Honest Wash Brake Dust Professional Wheel Cleaner -- 2oz Sample Tired of scrubbing every inch of your wheels to get rid of brake dust? Honest Wash's Brake Dust Professional wheel cleaner can be sprayed on and, after just a few minutes, be sprayed off to reveal a clean, bright wheel. No scrubbing needed. Tough enough to remove brake dust while gentle enough to keep from hurting wheels that are painted, powder coated, anodized, machined, and dipped. Safe for alloy rims.
Part #: HW11-S
Price: $2.69 (USD) 
$2.99 (Sale - Save 10%)
Quantity:   
Liqui Moly Radiator Cleaner - 300mL

Deposits in the radiator can lead to inefficient cooling or improper temperature readings. Long term exposure to high temperatures can cause internal engine components to warp or become damaged without proper cooling. This Liqui-Moly Radiator Cleaner reliably removes these deposits without adversely affecting the rest of the cooling system, allowing the cooling system to run efficiently, cooling the engine to proper operating temperatures. 

This does not contain any acids or alkali's and is acid neutralizing.

Liqui-Moly is a German chemical company that offers top of the line engine oils, additives, and car care products that are designed to extend the life of your engine and ensure the best lubrication and cleanliness off engine and transmission components possible. With more than 50 years of experience and reviews across the world from magazines and race teams, Liqui-Moly proves time and time again why they are one of the most innovative lead forces of performance automotive chemicals in the world.

Part #: 2051
Price: $6.26 (USD) 
$6.95 (Sale - Save 10%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Wheel Center Cap - Priced each Missing center caps can be a pain. Restore the looks of your car and replace your lost or missing center caps.
Part #: 361310610
Price: $21.60 (USD) 
$27.00 (Sale - Save 20%)
Quantity:   
Complete Turner Baffled Oil Catch Can Kit - Standard Flow 8oz

When we designed this catch we wanted to have the most function options available, the best separation method, and the easiest to service. The Turner engineered catch cans offer a pre-setup design based ion desired flow direction, however this does not limit you to this flow. The inner baffle orientation can be easily adjusted to flow in both directions in case you decide to move this catch can to a different vehicle. A 4 chamber system  baffle system inside the catch can was engineered to create multiple changes in the direction of airflow within the separator to cause oil droplets to fall out of suspension before exiting the catch can. Having a closed / recirculated design reduces oil ingestion and promotes cleaner emissions and odor-less operation.

Our catch can was also designed with the idea that the cans fill level can easily be checked with a top mounted dipstick and an optional use bottom drain hole. The drain system comes complete with a valve and hose to be mounted at a lower area of the vehicle so when you're doing an oil change you can drain the catch can.

Features:

  • 6061-T6 billet machined body, anodized black for lasting protection and appearance
  • Strategically positioned 4 chamber baffle system maximizes oil / air separation 
  • Knurled and black anodized oil dipstick makes inspecting oil volume of reservoir clean and simple
  • Sealed with a pre-installed viton O-Ring
  • Includes 2.5mm allen key to remove baffle plates for cleaning
  • Engineered to create multiple changes in the direction of airflow within the separator to cause oil droplets to fall out of suspension before exiting the catch can
  • Closed / recirculated design reduces oil ingestion and promotes cleaner emissions and odor-less operation
  • Optional use drain hole - drain kit included!
  • Universal mounting kit
Part #: 022798tms01-07KT
Price: $161.46 (USD) 
$189.95 (Sale - Save 15%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Chase Bays Brake Booster Eliminator - E30 E28 E24 E21

Gain more constant braking feel and modulation by eliminating your brake booster. With this kit your brakes will function like factory below threshold braking, but above threshold braking, while requiring more effort, this give you better modulation of the brakes giving you total control and the right amount of braking for what you need. 

*Please note this kit will not work with factory lines and requires one of brake line relocation kits also*

 

 

 

Part #: CB-EURO-BBE
Price: $180.00 (USD) 
$199.99 (Sale - Save 10%)
Quantity:   
Schwaben Black Mechanics Work Gloves - XL

Perfect for any job when it comes to keeping your hands clean and protected.

Features:

  • High dexterity
  • Elastic hook and loop strap
  • Textured latex finger tips for grip
  • Breathable material
Part #: 010337SCH03A
Price: $7.46 (USD) 
$9.95 (Sale - Save 25%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben 6.5 Liter Fluid Extractor

6.5 Liter Extractor system is hand -operated for fast extraction of any type of fluid. Two different diameter extracting tubes are included to suit your particular application. Unit has a vacuum release button for quick and easy release. 

Features:

  • Flip out foot for stability whils using the extractor
  • Built in hose storage
  • 41" Main tube 3/8" OD
  • Two 35" extension tubes 1/4" and 3/16" OD ( couples to main tube).
Part #: 011885SCH01A
Price: $59.96 (USD) 
$79.95 (Sale - Save 25%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben European Car Electrical Terminal Tool Kit - 12 Pieces

This tool comes in handy especially when working with an engine harness. Certain areas are always prone to corrosion and this tool makes having to re-pin a connector a breeze.

Unlike small screwdrivers, picks, and paper clips, these tools are the correct size and shape to remove and install tiny electrical pins and terminals at plastic block connectors with ease, and will not damage the connectors in the process.

Packaged in a blow molded case to keep everything secure and organized.

Part #: ce-70-2
Price: $80.00 (USD) 
$89.95 (Sale - Save 11%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben Impact Screwdriver Kit - 6 Pieces

The impact driver is a fast and effective way to remove tight or corroded screws and bolts, reducing the chance of rounding off--or rounding out--the fastener head. Insert a slotted or Phillips head screwdriver bit into the driver.

For stubborn bolts, remove the black screwdriver bit adapter head, and replace it with any 3/8 - inch drive socket.

Features:

  • Impact driver tool with red rubber grip 
  • Four screwdriver bits (2 Phillips; 2 slotted) 
  • 3/8 - inch drive bit holder

 

Part #: pcs2800
Price: $12.71 (USD) 
$16.95 (Sale - Save 25%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
aFe Pro5R Air Filter - E30 M3, 84-85 318i, 84-85 325e, 84-85 528e, All E12, E23, E24 (no M), E28 535i/is This is a drop-in stock replacement aFe performance air filter that installs into your BMW's factory airbox. This particular filter fits the following BMWs:
E30 M3 (1988-1991)
E30 318i (1984-1985)
E28 528e (1984-1985) and 535i/535is (1985-1988)
E12 5 series, All (1975-1981) - including 528i, 530i, 533i
E23 7 series, All except 745i (1977-1987) - including 730i, 733i, 735i, L7
E24 6 series, All except M6 (1976-1989) - incl. 630CS, 633Csi, 635CSi


This version uses aFe's highest flowing filter media, which uses a lightly oil gauze to filter out dirt and particulates, while allowing more air to flow to the intake. For the best flowing filter, with the best performance gain, we always recommend this standard aFe filter media (often called "Pro5R ", which has a blue pre-oiled filter media). We also carry this filter in the "ProDry" grey filter media, which is oil-free for only slightly less performance and no maintenance.
Part #: 30-10048
Price: $66.56 (USD) 
$73.95 (Sale - Save 10%)
Free Shipping Free Shipping
Quantity:   
Schwaben 12-19mm Multi size Socket Wrench

The Schwaben 8-in-1 drain plug socket wrench. Take one wrench that fits most common metric drain plugs with external hexagonal heads. Six-point socket heads grip securely and won’t round off plug heads.

Features:

  • Made of vanadium steel with polished chrome finish
  • Strong magnet on the side of the handle to hold the drain plug until you are ready to reinstall it
  • Sizes include: M12, M13, M14, M15, M16, M17, M18, and M19
Part #: W-136PM
Price: $14.96 (USD) 
$19.95 (Sale - Save 25%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben 1/2

Proper torque is very important when it comes to working on engines. The importance comes from proper sealing and to keep from damaging threads.

Features:

  • Reversible ½-inch drive click-to-stop
  • Torque range of 10 to 150 ft-lb
  • Accurate to within +/-4%
  • 18 inches in length with a convenient carry case
Part #: TW-12450
Price: $29.96 (USD) 
$39.95 (Sale - Save 25%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben Radio Removal Tool Kit - 32 Pieces

The radio removal tool make removal of the stock radio easy, offering just the right design so there is no damage.

Features:

  • 32-piece Master Radio Removal Kit removes most German radios, plus radios in many Asian and Domestic makes
  • Come in a handy blow-molded case with silhouetted compartments for each tool, making it easy to transport and keep track of individual keys and tools
  • Many keys have comfortable rubber padded grips
Part #: AAR-32PCS
Price: $37.46 (USD) 
$49.95 (Sale - Save 25%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben Water Pump Pulley Holder for Removal of Fan Clutch Replacing the fan clutch on most BMW models requires holding the water pump pulley while removing the fan clutch lock nut. With less than 1 1/2" clearance on some models this project can easily turn into a mechanical nightmare. Using our special slim line fan clutch wrench in conjunction with the appropriate pulley spanner, the removal and installation required only a few moments.
Part #: 001170SCH01A
Price: $18.71 (USD) 
$24.95 (Sale - Save 25%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben Locking Hose Clamp Pliers

These Schwaben flexible reach hose clamp pliers can reach where others can not.

Feature:

  • Spring loaded clamp with a 24" cable
  • Designed to remove metal or plastic self-tightening hose clamps
  • Work with diameters from 11/16" to 2-1/2" ( 18 to 54mm)

These pliers feature a spring loaded clamp with a 24" cable and will lock onto the clamp and hold open for easy removal. These pliers are designed to remove metal or plastic self-tightening hose clamps with diameters from 11/16" to 2-1/2" ( 18 to 54mm).

Part #: 004170SCH01A
Price: $29.21 (USD) 
$38.95 (Sale - Save 25%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Telescoping Hood Prop

It only takes a gust of wind to have your hood crashing down on your head, or if you have a carbon fiber hood and no longer have the gas struts than this could be what you need.

 This hood prop is adjustable, lightweight, and sturdy making it easy to keep out of the way in the trunk so it's there whenever you need it. 

Part #: 006056SCH01A
Price: $14.96 (USD) 
$19.95 (Sale - Save 25%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Trailer Ramps 5

Is your trailer door ramp too steep to get your car into the trailer, 

Load your vehicle safer and easier with Schwaben trailer ramps. Our trailer ramps create a more gradual angle to prevent spoiler damage when loading and unloading vehicle into or out of trailer.

Features:

  • These ramps work on cars weighing up to 6,000 pounds
  •  Ideal for low ground clearance cars with extra wide tires.
  • Will not scratch or mark your floors!
  • Will not scoot, slip or slide no matter the surface
  • Will not damage trailer door or trailer
  • Light weight at only 15 lbs
  • Highly durable, virtually indestructible, and very stable
  • Ramps have built in straps to allow transport or ability to be hung on the wall.
  • 67" long, 14" wide, 5" tall.

Note: if your current stock trailer ramps have an additional fold down ramp, we suggest you either fold it up or remove it.

Part #: 006167SCH01A
Price: $231.00 (USD) 
$308.00 (Sale - Save 25%)
Quantity:   
Wheel Chocks - Pair Always make sure to chock your wheels when lifting one end of the car, this ensures the car stays in place and up in the air.
Part #: 006190SCH01A
Price: $24.00 (USD) 
$32.00 (Sale - Save 25%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben 2-pc 67

These ramps never scoot, slip or slide while rolling onto the ramps.All that said means these ramps are easy to drive up on and very safe. Our Schwaben ramps will never scratch or blemish your floors.

Having ramps to use offers more than just convenience, it offers safety. Laying under a car working is much easier to do knowing the car is resting the wheels on a firm surface.

Please refer to chart below to see if these 67" Schwaben ramps are right for you vehicle.

1. Take a yardstick, and wedge it under the front edge of front tire.

2. Raise it up until it hits the underside of your car( the spoiler)

3. Measure from the tip of the yardstick to the ground, vertically.

 67 " long,14" wide, 10" lift height, at 15 lbs each and a low 10.8 degree incline.

If your measurement is 7.25" or greater, you can clear these ramps with no problem. 

 

For increased safety, use wheel chocks with all Schwaben Ramp products.

Part #: 006160SCH01A
Price: $264.00 (USD) 
$352.00 (Sale - Save 25%)
Quantity:   
Schwaben Deep Well Impact Socket - 46mm

This large socket is the perfect tool for axle nuts when servicing the axle shafts or wheel bearings.

Features:

  • ½-inch drive 46mm 12-point socket
  • Specially hardened to take the added abuse from a impact gun
  • Coated for added protection and so you can tell it apart from non impact rated sockets
  • 75mm depth  to accommodate many applications and different length shafts
  • Made of durable chrome moly steel

 

 

Part #: 003302SCH03A
Price: $14.96 (USD) 
$19.95 (Sale - Save 25%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben Aluminum 3-Ton Jack Stands - Pair

Safety is always the most important factor when it comes to working under your car, jack stands are highly recommended. 

 

Features:

  • Ultra light  jack stands only weigh 4.7 lbs each
  • All aluminum construction with heavy-duty  flanged bases to safely stabilize loads
  • 6 locking positions for a secure load in multiple heights
  • Extra heavy duty load pin at .584 in. diameter with a posi lock ball to insure it stays in place
  • Min. Height is 10.6
  • Max Height is 15.4"
  • Large 7" diameter base
  • Outer support tube is 2-1/8" in diameter

 

Part #: 005945SCH01A
Price: $64.46 (USD) 
$85.95 (Sale - Save 25%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben Professional Quality Deluxe Two Shelf Service Cart

Having convenient carts make organizing a breeze and passing that on to getting the job done well.

Features:

  • Beautiful & durable high gloss black powder coated finish
  • 350lbs load capacity supports heavy tools, parts and equipment
  • Dual handles allow Push-Pull from either side for better maneuverability
  • Rugged thru tray frame construction for stable support
  • 3" Deep trays 
  • Large, easy to maneuver 4" ball bearing casters (2 are locking)

 

Dimensions:

  • Height - 35.3"
  • Length - 30"
  • Width - 16"
  • Weight - 37.5lbs
Part #: 005947SCH01A
Price: $89.95 (USD) 
$117.95 (Sale - Save 24%)
Free Shipping Free Shipping
Quantity:   
Schwaben 3/8

A professional quality ratchet with a fine satin finish for comfort, durability, and easy clean-up.  

Features:

  • 200mm(7.75") long ratchet
  • Special designed 72T gear mechanism uses only 5 degree handle movement between gears
  • Push button release holds socket tight until you are ready to release. No more dropped sockets

Limited Lifetime Warranty 

 

Part #: 005985SCH01A
Price: $17.21 (USD) 
$22.95 (Sale - Save 25%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Brembo Calipers Lotus, A, C, F - Street Brake Pad Set - StopTech Street Performance The StopTech Street Performance brake pads just may be the best all-around pad on the market today. Manufactured from a proprietary para-aramid material (similar to Kevlar) that works well when cold, produces a strong initial bite, fade-resistant on the track, and low noise and low dust. It's unbeatable performance for the price! The Street Performance compound is standard in all StopTech big brake kits and are now available for your Brembo calipers.

This pad set fits the following Brembo 4-piston calipers:
Lotus / Type A / Type C / Type F

Lotus calipers are found in many Brembo GT Big Brake Kits, including these BMW models:
1984-1991 E30 BMW 318i 318is 318ic 325e 325es 325i 325ic 325is 325ix M3
1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2013 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive - Coupe
2007-2013 E93 BMW 328i 335i - Convertible
1982-1988 E28 BMW 524td 528e 533i 535i 535is M5
1989-1995 E34 BMW 525i 530i 535i 540i M5
1997-2003 E39 BMW 525i 528i 530i 540i M5
1982-1989 E24 BMW 633csi 635csi M6
1988-1994 E32 BMW 735i 735il 740i 740il 750il
1995-2001 E38 BMW 740i 740il 750il
2004-2010 E83 BMW X3 2.5i X3 3.0i X3 3.0si
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
2009+ Z4 BMW Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
2002-2006 R50 MINI MINI Cooper
2005-2008 R52 MINI MINI Cooper Convertible, MINI Cooper S Convertible.
2002-2006 R53 MINI MINI Cooper S
2007+ R56 MINI MINI Cooper, MINI Cooper S
2007+ R55 MINI MINI Cooper Clubman, MINI Cooper S Clubman
2007+ R57 MINI MINI Cooper Convertible, MINI Cooper S Convertible,
2011+ R60 MINI MINI Cooper Countryman, MINI Cooper Countryman s
Part #: TMS16487
Price: $80.06 (USD) 
$88.95 (Sale - Save 10%)
Quantity:   
Brembo Calipers F40, F50, B, H, GT1 - Street Brake Pad Set - StopTech Posi-Quiet Extended Wear These Extended Wear brake pads from StopTech/Centric are a great low-cost solution to pad wear and brake dust. The focus on these pads is a long pad life with as little brake dust residue as possible. These are street pads only and will not have the same bite and torque values as more high-performance pads. But if you're looking for a capable and user-friendly pad for daily use, these are great.

This pad set fits the following Brembo 4-piston calipers:
F40 / F50 / Type B / Type H / GT1 / Monobloc P

F40 calipers are found in many Brembo GT Big Brake Kits, including these BMW models:
2008-2012 E82 BMW 128i 135i 1M Coupe
1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2013 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
2007-2013 E93 BMW 328i 335i M3 - Convertible
2012+ F30 BMW 328i 335i - Sedan
1989-1995 E34 BMW 525i 530i 535i 540i M5
1997-2003 E39 BMW 525i 528i 530i 540i M5
2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i M5
2010+ F07 BMW 535i GT, 535i xDrive GT, 550i GT, 550i xDrive GT
2011+ F10 BMW 528i 535i 535i xDrive 550i 550i xDrive M5
2004-2011 E63 BMW 645ci 650i M6
2012+ F13 BMW 640i 650i
1988-1994 E32 BMW 735i 735il 740i 740il 750il
1995-2001 E38 BMW 740i 740il 750il
2002-2008 E65 BMW 745i 745li 750i 750li 760i 760li
2009+ F01 BMW 740i 740li 750i 750li 750i xDrive 750li xDrive 760li
1990-1999 E31 BMW 840i 840ci 850i 850ci 850csi
2004-2010 E83 BMW X3 2.5i X3 3.0i X3 3.0si
2011+ F25 BMW X3 xDrive28i X3 xDrive35i
2000-2006 E53 BMW X5 3.0i X5 4.4i X5 4.6is X5 4.8is
2007-2013 E70 BMW X5 3.0si X5 4.8i X5 xDrive30i X5 xDrive35d X5 xDrive35i X5 xDrive48i X5M
2008+ E71 BMW X6 xDrive35i X6 xDrive50i X6M
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
2009+ Z4 BMW Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
Part #: TMS16481
Price: $53.96 (USD) 
$59.95 (Sale - Save 10%)
Quantity:   
Tool - 22mm 3/8 Drive 12-point Socket 22mm hex socket with 3/8" drive.
Part #: 02010022
Price: $18.66 (USD) 
$21.95 (Sale - Save 15%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Water Pump Pulley Holder for Removal of Fan Clutch Replacing the fan clutch on most BMW models requires holding the water pump pulley while removing the fan clutch lock nut. With less than 1 1/2" clearance on some models this project can easily turn into a mechanical nightmare. Using our special slim line fan clutch wrench in conjunction with the appropriate pulley spanner, the removal and installation required only a few moments.
Part #: 143240
Price: $28.01 (USD) 
$32.95 (Sale - Save 15%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Stealth Bulb Side Marker Bulbs (Set) Stealth Bulb Side Marker Bulbs (Set). Fits most BMW side marker indicators. No more ugly orange egg yolk look in your clear corners. Check your stock bulb and compare to photo before ordering.
Part #: TMS450
Price: $25.46 (USD) 
$29.95 (Sale - Save 15%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Turner Motorsport Custom Tough Case iPhone 4 / 4S The best iPhone case just got a bit better! We've taken the Tough Case iPhone cover and customized it with a photo of the Turner Motorsport #96 E92 M3, running hard at Barber Motorsports Park.

The Tough iPhone 4 / 4S case uses dual layers of resilient material for a rugged case that protects the object of your affection with a defensive style. The base layer is a form-fitting silicone skin that completely surrounds the iPhone 4 / 4S, adding a layer of cushion that absorbs shocks and impacts.The outer layer is an impact resistant, polycarbonate hard shell fits that fits directly on top of the silicone skin for extra iPhone protection.A solid finish makes the iPhone 4 / 4S case easy-to-hold, while the streamlined design keeps the silhouette slim enough to fit in your pocket.

Dimensions: 4.62 x 2.39 x 0.45 in (117.2 x 60.6 x 11.3 mm)
Part #: 96-IPHONE
Price: $17.50 (USD) 
$24.95 (Sale - Save 30%)
$24.95
Limited Qty Sale
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
19mm 12x1.5 Turner Yellow Zinc-Coated Race Wheel Nut Turner Motorsport’s five years of endurance competition has taught us many things. One was that not all lug-nuts are made the same. While the standard nuts that we sell are great for daily drivers, HPDE events, and club racing, a beefier and more durable nut was needed for the 3-hour, 6-hour, and 24-hour professional endurance races. During the 24 Hours of Daytona, our crew guys made over 80 tire changes in NASCAR-style pitstops. That kind of abuse from air guns and fast work required the "next level" of lug-nut. These nuts are a high-grade steel with a zinc coating and they incorporate several innovative features.

The wheel-side of the nut has recessed threads so that the nut has to be square to engage the threads. Without the recess, it’s far too easy to start the threads with the nut being crooked.

The 19mm head of the nut is slightly rounded to help the socket find its position.

The zinc plating that we use is reasonably durable without being excessive. With too much coating, the chipped and worn coating fragments can end up in the threads, leading to all sorts of trouble. Anyone who has used nuts repeatedly knows that the coating is not going to last forever. The constant abuse from air guns will chip it all away. So why add weight and the potential for disaster with excess coating? We did away with most of the danger from that with a lighter coating that still resists the tough environment of the track.

Features:
  • Developed for our Grand-Am / Continental race team
  • High grade steel to withstand the extreme abuse of air guns and race conditions
  • Bright yellow zinc plating to help tire changer zoom in on their target quickly and accurately
  • Minimal plating won’t result in excess coating wearing off and “gumming up” the threads
  • 19mm hex to prevent rounding off
  • Rounded top for fast socket engagement
  • Recessed threads to aid in fast nut-to-stud alignment without cross threading
  • We recommend using with Turner Motorsport bullet nose dry-lube wheel studs
    Price is per nut.
  • Part #: TWH9952R19
    Price: $3.71 (USD) 
    $4.95 (Sale - Save 25%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Turner Motorsport Brake Bleeder Bottle with Check Valve - Simple Bleed This is the new evolution of our popular Brake Bleeder Bottle. The latest design features a one-way check valve inside the bottle that is operated when you pump the brakes. This is a more economical and simpler system than other "1 man bleeding" kits - no modification to your brake system and you only have to buy the one bottle. The newest bottles also include upgraded caps and fittings for a tighter seal.

    The one-way check valve is extremely simple to use - attach the bottle and hose, open your bleed screw, and pump your brakes from the pedal. The check valve opens with each pump to let fluid and air out of the system and then seals tight when the pedal is released. The bottle uses a large magnet to conveniently stick to your brake disc while you run the hose to the caliper.

    Works on just about all brake systems so no need to have specialized adapters or bleed screws.
    Part #: BBMCV
    Price: $18.66 (USD) 
    $21.95 (Sale - Save 15%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Tool - 27mm 1/2 Drive 6-point Socket 27mm hex socket with 1/2" drive.
    Part #: TMI9910M27
    Price: $22.95 (USD) 
    $27.00 (Sale - Save 15%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Turner Motorsport Reverse Flow 6oz Baffled Catch Can

    When we designed this catch we wanted to have the most function options available, the best separation method, and the easiest to service. The Turner engineered catch cans offer a pre-setup design based ion desired flow direction, however this does not limit you to this flow. The inner baffle orientation can be easily adjusted to flow in both directions in case you decide to move this catch can to a different vehicle. A 4 chamber system  baffle system inside the catch can was engineered to create multiple changes in the direction of airflow within the separator to cause oil droplets to fall out of suspension before exiting the catch can. Having a closed / recirculated design reduces oil ingestion and promotes cleaner emissions and odor-less operation.

    Our catch can was also designed with the idea that the cans fill level can easily be checked with a top mounted dipstick and an optional use bottom drain hole. The drain hole can be used with a valve and hose to be mounted at a lower area of the vehicle so when you're doing an oil change you can drain the catch can.

    Features:

    • 6061-T6 billet machined body, anodized black for lasting protection and appearance
    • Strategically positioned 4 chamber baffle system maximizes oil / air separation 
    • Knurled and black anodized oil dipstick makes inspecting oil volume of reservoir clean and simple
    • Sealed with a pre-installed viton O-Ring
    • Includes 2.5mm allen key to remove baffle plates for cleaning
    • Engineered to create multiple changes in the direction of airflow within the separator to cause oil droplets to fall out of suspension before exiting the catch can
    • Closed / recirculated design reduces oil ingestion and promotes cleaner emissions and odor-less operation
    • Optional use drain hole (valve and hose sold separately, watch for our model specific drain kits!)
    Part #: 022798TMS01-04
    Price: $118.96 (USD) 
    $139.95 (Sale - Save 15%)
    Free Shipping Free Shipping
    Quantity:   
    Schwaben 3/8

    Looking to update your old torque wrenches? The Schwaben 3/8" Drive Digital Torque Wrench is your answer. 

    This digital torque wrench uses an easy-to-read display to show torque amounts and settings, features a push button release, reversible 3/8" drive, 45 tooth ratchet head, and a comfortable no-slip grip and adjustment wheel.

    Specifications:

    • Setting Range: 15-80 ft lbs (20-110 Nm)
    • Display Units: ft-lbs, N-m, Inch-lbs, cm-kg2, and m-kg
    • Size: 16" (370mm) length
    • Accuracy: +- 3%
    • Include blow molded holding case
    • Requires one 3V CR2030 battery (included)
    Part #: 023382SCH01A
    Price: $82.46 (USD) 
    $109.95 (Sale - Save 25%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Liqui Moly Jectron Fuel Injection System Cleaner - 300 mL

    Fuel injectors tend to get built up with gunk over the years, eventually affecting the spray pattern and reducing engine efficiency. By using a fuel injector cleaner every 3-4 fill ups (or 1200 miles) like this Liqui-Moly Jectron, you can ensure that your fuel injection system is staying in top shape, giving you the best efficiency possible and preventing a number of potential issues such as poor emissions, lost performance, and rough idle.

    Features:

    • Cleans Injectors
    • Reduces Fuel Consumption and Exhaust Emissions
    • Keeps Intake Valves Clean (on vehicles without direct injection only)
    • Restores Performance, Drivability, and Durability
    • Promotes Proper Fuel Atomizing
    • Smooths Idle
    • Allows for Best Throttle Response
    • Allows for Faster Starts and Avoids Surging

    Liqui-Moly is a German chemical company that offers top of the line engine oils, additives, and car care products that are designed to extend the life of your engine and ensure the best lubrication and cleanliness off engine and transmission components possible. With more than 50 years of experience and reviews across the world from magazines and race teams, Liqui-Moly proves time and time again why they are one of the most innovative lead forces of performance automotive chemicals in the world.

    Part #: 2007
    Price: $6.26 (USD) 
    $6.95 (Sale - Save 10%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben Mechanics Stethoscope

    This tool is ideal for finding unusual vibrations or suspected leaks. 

    Features:

    • Aluminum alloy probe to determine noise location fast
    • Rubber trumpet to check for vacuum leaks and pressure flow noise
    • High quality surgical PCV hose for long life and increased sound definition
    Part #: 005965SCH01A
    Price: $14.96 (USD) 
    $19.95 (Sale - Save 25%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben 6 Liter Fluid Extractor/Filler System

    6-Liter Extractor/Filler System makes oil, ATF or any type of fluid change a snap. Easily change to pump-in/out with the flip of a lever.

    Features: 

    • Extendable foot step for stable use when pumping
    •  All adapters mount on the tank for convenient storage of the 9 included adapters
    • 5-foot main tube features a quick disconnect and shut off valve
    • Included is a 24" long and 3/8" OD tube with quick connect nipple
    • Manual pump and requires no electricity or air pressure to operate
    • Extract up to 6-Liters of new fluid from barrel, bucket or bottle into the tank, turn handle to out position to fill into your vehicle

     

    Now Available:  Optional Dipstick extracting tube set 

    Part #: 007221SCH01A
    Price: $127.46 (USD) 
    $169.95 (Sale - Save 25%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben 3-Liter European Pressure Brake Bleeder

    We know bleeding brake alone is not only no fun, but much more complicated than it needs to be. Having a pressure bleeder give you the ability to keep pressure on the brake system while you go under and crack open the bleeder screws to relieve the air pockets.

     

    Features:

    • Holds a full 3-Liters ( 3.17 qts) of brake fluid
    • Easy to read 0-30 lbs pressure gauge built into the tank top
    • Pressure relief valve for safe release of pressure
    • 40" hose with detachable swivel fitting
    • Do not  exceed 20 PSI
    • One-year warranty
    Part #: 007237SCH01A
    Price: $37.46 (USD) 
    $49.95 (Sale - Save 25%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben 12 Ft 6 Gauge Booster Cables Looking for a high quality set of jumper cable to keep around for emergencies? These are it, don't settle for cheap budget sets found at most places.
    Part #: 007269SCH01
    Price: $20.21 (USD) 
    $26.95 (Sale - Save 25%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben Universal Adapter Kit For Brake Bleeding This adapter is for use with the 3-Liter Multi-Functional Fluid Pump Kit  and  3-Liter European Pressure Brake Bleeder  only and allow for fitment on other brake fluid reservoir fitment. 
    Part #: 007311SCH04A
    Price: $14.96 (USD) 
    $19.95 (Sale - Save 25%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben Fluid Suction/Fill Pump

    This hand held Schwaben tool makes changing fluids an easy, quick task.The Schwaben fluid suction/fill pump suitable for oils, water and any non corrosive liquid.

    Features 

    • Comes with a flexible and a rigid tube. 
    • Flow rate is adjustable for different functions.
    • 350 ML capacity
    • Cylinder is marked in 20 mL increments and fraction of quarts for accurate filling. 

    Not for use with gasoline.

    Part #: 022253SCH01A
    Price: $27.71 (USD) 
    $36.95 (Sale - Save 25%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Honest Wash Spot & Oxidation Removal Kit

    Get rid of spots and oxidation with the Honest Wash Spot and Oxidation Removal Kit. It uses a polish to remove the stain and a wax spray to restore shine, keeping the mirror-like finish.

    Kit includes:

    • 32oz bottle of Precision Polish
    • 32oz bottle of Active Wax
    • 2 foam applicators
    • 3 microfiber towels
    Part #: HWKT-15
    Price: $40.49 (USD) 
    $44.99 (Sale - Save 10%)
    Quantity:   
    Honest Wash Microfiber Towel (5 pack)

    The jack of all trades in the detailing world, the microfiber towel is the most used tool by far. Whether used for drying, buffing, polishing, applicating, or for just general cleeaning, you will be sure to go through a lot of these. Honest Wash can keep you stocked up with their premium lint-free microfiber towels.

    Product Details:

    • Perfect for cleaning, waxing, polishing, & more 
    • Soft material will not scratch or harm surfaces 
    • Lint-free polyester blend 
    • Size: 14"x14" 
    Part #: HW13-5
    Price: $5.39 (USD) 
    $5.99 (Sale - Save 10%)
    Quantity:   
    Honest Wash Cross Dressing - Rubber, Plastic, & Vinyl - Cleaner & Conditioner 1 Gallon Take care of your interior and exterior plastic, rubber, and vinyl panels with Cross Dressing by Honest Wash, a multipurpose dressing that cleans, conditions, and gives your parts a glossy finish without leaving behind an oily residue. This helps prevent premature fading and aging on surfaces that have been neglected, making them look like new again.
    Part #: HW30-1G
    Price: $58.49 (USD) 
    $64.99 (Sale - Save 10%)
    Quantity:   
    Honest Wash HyperMint Wash - Car Wash Soap 32oz Honest Wash's HyperMint was is a concentrated soap that give off a fresh peppermint scent while efficiently lifting away dirt, grease, and grime from your vehicles paint. Made from a combination of synthetic detergents and emulsifiers, it is tough on dirt without being tough on any exterior surfaces or trim. It's high foaming formula is environmentally safe and requires only small amount of soap per wash, using on 2-8oz of soap per gallon of water.
    Part #: HW01
    Price: $12.59 (USD) 
    $13.99 (Sale - Save 10%)
    Quantity:   
    Honest Wash Bug Delete Bug, Tar, & Tree Sap Remover -- 1 Gallon Easily remove the build up of dead bugs, tar, film, and tree sap from the front of your car in minutes with Honest Wash's Bug Delete. Bug Delete is strong enough to wash away the layers of contaminants without damaging any of the exterior surfaces of your vehicle. Its ingredients are non-caustic, non-corrosive, and has no harsh alkalies.
    Part #: HW05-1G
    Price: $46.79 (USD) 
    $51.99 (Sale - Save 10%)
    Quantity:   
    Fat Foamer Foam Cannon Car Wash Soap 1 Gallon The perfect ammo for your foam cannon, sprayer, wand, or lance, Honest wash has made a specially designed soap to be used in spray-on applications that gives you a thick foam with suds that lift away dirt and grime. Tested safe with all paint and PlastiDip. Made in the USA.
    Part #: HW08-1G
    Price: $22.49 (USD) 
    $24.99 (Sale - Save 10%)
    Quantity:   
    Honest Wash Advanced Car Washing Kit

    Looking for a thorough clean? Pick up the Advanced Car Washing Kit from Honest Wash to get their Foam Sprayer and everything you need to rid your car of dirt, grime, grease, and road debris.

    Kit includes:

    • Foam Sprayer- Sprays a thick cleaning foam onto your vehicle, no pressure washer required.
    • Fat Foamer- A high foaming car wash soap
    • Bug Delete- Easily remove bugs, tar, and tree sap.
    • Brake Dust Professional- A touch-free wheel cleaner, safe on all wheel finishes.
    • Glass Perfect- A streak-free, tint-safe glass cleaner.
    • Tire Love- Protect, shine, and restore your tires with this long-lasting formula.
    • 4x Microfiber Towels- Use for cleaning windows, interior panels, cleaning hard to reach areas, and more.
    • Foam Applicator- Use to apply wax, interior dressings, and more.
    • Tire Dressing Applicator- Easily apply Tire Love to your tires.
    • Microfiber Wash Mitt- Wash your car and remove dirt with this ultra-soft wash mitt.
    • Waffle Weave Drying Towel- A gigantic microfiber towel with a waffle pattern dries your car quickly.
    • 3.5 Gallon Bucket- Use to rinse your wash mitt to avoid scratching your paint
    Part #: HWKT-10
    Price: $116.99 (USD) 
    $129.99 (Sale - Save 10%)
    Quantity:   
    Honest Wash Grease Lightning - Multipurpose Degreaser -- 2oz Sample Grease Lightning by Honest Wash is the best option to eliminate dirt, grease, and oil on your vehicle. Made from surfactants that are environmentally safe and bio-degradable, Grease lightning lifts and dissolves deposits of contaminants, letting you wife or rinse away stains on both exterior and interior parts of your vehicle. Best used area with heavy amount of dirt or oil such as cloth and carpet interiors, engines and engine bays, undercarriages, wheel wells, truck beds, door jams, and anywhere stubborn fingerprints won't wash off, such as your PlastiDip coating.
    Part #: HW06-S
    Price: $2.69 (USD) 
    $2.99 (Sale - Save 10%)
    Quantity:   
    Schwaben Telescoping Round Mirror

    Great for working in tight spacers when you can't get a good eye on the issue.

     

    Features:

     

    • Offers an 9-1/2" to 29" extendable handle with a stainless steel shaft
    • 2-1/4" mirror head mounted on a dual swivel for a full 360 degree rotation
    • Cushion grip rubber handle works great with dry or oily hands
    Part #: 010772SCH01a
    Price: $7.46 (USD) 
    $9.95 (Sale - Save 25%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben 7mm Hose Clamp Flexible Driver

    Makes those hard to reach hose clamps much easier to loosen up.

    Features:

    • 7mm driver
    • 6"  flex shaft
    • Overall length of 10-1/2"
    • No-slip grip resistant to wet or oil coated hands

     

    Part #: 010658SCH01A
    Price: $8.21 (USD) 
    $10.95 (Sale - Save 25%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben 3-piece Euro Style Locking Plier Set

    No more pinched fingers or dropping as they unlock. This style locking lever is all one hand operation. Can be unlocked with lower finger while still gripping plier. Others require a two hand operation.

    Features:

    • 7" Straight Jaw Locking Pliers
    • 7" Curved Jaw Locking Pliers
    • 6" Needle Nose Locking Pliers
    Part #: 008917SCH01A
    Price: $23.96 (USD) 
    $31.95 (Sale - Save 25%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben 4 Pc Plier Set

    Having a nice set a pliers can make a big difference on the ease of getting the job done. Schwaben pliers are designed around comfort and keeping them clean.

    Features:

    • 7" Diagonal cutter pliers
    • 8" extra long needle nose pliers with cutter and round jaw grip.
    • 8" Slip joint pliers has two settings
    • 10" Groove joint pliers with 4 settings
    Part #: 008927SCH01A
    Price: $35.21 (USD) 
    $46.95 (Sale - Save 25%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben Extended 19mm Wheel Stud Socket Adapter

    Installed extended wheel studs and would love to be able to change wheel spacers as needed? But wait, if you have a flat tire or want to change it up at the track. But now your lug wrench is not deep enough to reach the nuts.

    Features:

    • This specially made socket features 19mm male hex on one end and 19mm socket on the other
    • Works to extend reach between wrench and lug nut
    • Keep inside your glove box so it is ready for any tire change on the road or on the track

    NOTE: Not for use with impact.

    Part #: 004351SCH02A
    Price: $11.21 (USD) 
    $14.95 (Sale - Save 25%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben Magnetic Protecta Wheel Socket Set

    Schwaben Protecta Sockets have color coded mar-free exterior sleeve  that prevent nicks and scratches left by plain metal sockets. Internal spring loaded magnet holds lug nut in place.

    Features:

    • 17mm, 19mm and 21mm Sockets included in a blow molded case.
    • All sockets are 1/2" drive
    • 3-3/8" ( 86mm) long

    Use these with your breaker bar or impact gun to remove the tightest wheel bolts and lug nuts: when reinstalling wheels, use them to final torque wheel fasteners to factory specifications.

     

    Part #: 016135SCH01A
    Price: $44.96 (USD) 
    $59.95 (Sale - Save 25%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Turner Motorsport 12x1.5 Bullet Nose Wheel Stud - Most BMWs 1984-2011 (E30, E36, E46, E9X) As used on the Lime Rock M3 Made in the USA
    • 75MM OR 90MM OVERALL LENGTH
    • EASY INSTALL WITH ALLEN SOCKET
    • BLACK M-PHOSPHATE COATING
    • CORRECT SHOULDER SIZE FOR HUBS/BRAKE ROTORS
    • STUD FOR MIXED STREET/TRACK USE

    Wheel studs are among the safest and most beneficial upgrades you can make on a track car. Not only are wheel studs safer than wheel bolts but they make changing wheels/tires much easier. One of the frustrating things about installing your wheels on the hub is that it's difficult to line up the wheel on the bolt holes. As wheels get larger but also heavier it's even more trouble. Add in a wheel spacer and the task is twice as hard. BMW does produce a wheel alignment pin for this purpose but if you're changing wheels often a stud conversion is the better way to go.

    Our original bullet nose studs are available in 75mm and 90mm overall lengths. The 75mm works great for cars that do not use a spacer (or a spacer smaller than 10mm). We recommend the 90mm length for cars that have a spacer larger than 10mm. These studs come with a black magnesium phosphate coating for excellent corrosion resistance. These studs are perfect for dual-purpose street/track cars. The studs are stronger and safer than wheel bolts and have a barrier against corrosion which makes them suitable for street use. For a dedicated race or track car, where wheel changes or pit stops are more frequent, check out our racing dry lube studs.

    Our studs are also designed and manufactured with the properly sized shank to work with a wider range of BMW wheel, nut, and brake rotor combinations. We intentionally avoid the extra large shoulders you see on other studs because they can interfere with some brake rotor hats. The extra large shoulder can be too large to allow the rotor to pass through and drilling out the holes is required (not cool!) Our studs have the sufficient shank for the brake rotor without interfering.

    Not all wheel studs are created equal. We don't take a manufacturer's generic wheel stud from their catalog and call it our own. Turner Wheel Studs are manufactured to meet our own specifications. Beware of cheaper studs on the market! We have seen other studs similar to our own designs that are not a true BMW fitment. There are differences that we have ironed out over our years of selling wheel studs for the BMW market. Our stud prices may be slightly higher than the rock bottom prices on the web but we promise that it's a higher quality.

    FREE red threadlocker with purchase of a full set of wheel studs (16 or more)
    Turner Bullet Nose Wheel Stud Features:
  • Black phosphorous corrosion resistant coating
  • Innovative nut-starter and bullet shape radius that all but eliminates cross-threading
  • Long shank for good brake rotor alignment
  • Heat-treated aircraft quality alloy steel
    Installation Instructions
    Click here for installation instructions and more information.



    Sold per stud.
  • Part #: TWH9950
    Price: $5.92 (USD) 
    $6.96 (Sale - Save 15%)
    Free Shipping Free Shipping
    on orders $199 and up
    Wheel Bolt for BMW, MINI - 12x1.50 - Black Chrome - fits most BMWs (see list) These 'show quality' black chrome wheel bolts have a satin/luster finish to them that looks better than most other finished bolts, including the factory bolts. The bolt head is also finished off better with a rounded head instead of recessed. If your wheels are perfect, your bolts should be too! These are high grade (10.9) 12x1.50 bolts, in the same size as the stock bolt or to be used with a small 5-8mm spacer.

    Price is per bolt (each). You can enter your quantity after pressing the Update Price button below or from the shopping cart.






    + Emblem Application Specifics
    (click here to check your car)
    These black satin wheel bolts fit the following BMWs:
    2008-2012 E82 BMW 128i 135i 1M Coupe
    1984-1991 E30 BMW 318i 318is 318ic 325e 325es 325i 325ic 325is 325ix M3
    1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
    1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
    2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
    2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
    2007-2013 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
    2007-2013 E93 BMW 328i 335i M3 - Convertible
    1982-1988 E28 BMW 524td 528e 533i 535i 535is M5
    1989-1995 E34 BMW 525i 530i 535i 540i M5
    1997-2003 E39 BMW 525i 528i 530i 540i M5
    2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i M5
    1982-1989 E24 BMW 633csi 635csi M6
    2004-2011 E63 BMW 645ci 650i M6
    1988-1994 E32 BMW 735i 735il 740i 740il 750il
    1995-2001 E38 BMW 740i 740il 750il
    1990-1999 E31 BMW 840i 840ci 850i 850ci 850csi
    1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
    2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
    2000-2003 E52 BMW Z8 Roadster
    2002-6/2006 R50 MINI MINI Cooper
    2005-6/2006 R52 MINI MINI Cooper Convertible, MINI Cooper S Convertible.
    2002-6/2006 R53 MINI MINI Cooper S
    Part #: TMS16545
    Price: $5.31 (USD) 
    $6.25 (Sale - Save 15%)
    Free Shipping Free Shipping
    on orders $199 and up
    Turner Motorsport Blipshift Z4 Racecar T-Shirt - Black Your 328i may not yet be a full blown GT racecar, but adding that short shift kit gets you one step closer. Monday morning's 5 minute long red light is a chance to daydream of the 180mph high banks of Daytona! Every mod is a life enhancement with daily rewards.

    Introducing the winner of the Racing Bimmers Tee Design Contest by Blipshift honoring Turner Motorsport's continued success with BMW racecars! From e30s to last season's monster Z4, Turner has stayed true to BMWs since 1993, amassing 7 championships.

    Congrats to Anthony, winner of the Pit Crew Experience with the Turner team this season at Mazda Raceway Laguna Seca!

    Only available at TurnerMotorsport.com. Choose from Fitted T-shirt or Beefy T
    Part #: BS-Z4-FITTED
    Price: $12.00 (USD) 
    $19.95 (Sale - Save 40%)
    Free Shipping Free Shipping
    on orders $199 and up
    Schwaben 8oz Ball Peen Hammer The 8oz Ball Peen hammers are constructed with a fiberglass handles with a molded rubber grip. The heads are made from drop forged steel to avoid damage and to stand up to long years of impacts. Each side is precision ground for accurate striking points.
    Part #: 016805SCH02A
    Price: $7.46 (USD) 
    $9.95 (Sale - Save 25%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben 3pc Professional Hammer Set

    Every now and then you just need a hammer to get the job done. Ensure that your hammers are high enough quality to stand up to the demands of the job!

    Included in this set:

    • 8-oz Ball Peen Hammer 
    • 16-oz Ball Peen Hammer 
    • 36-oz Dead Blow Hammer

    The 8 and 16 oz Ball Peen hammers are constructed with a fiberglass handles with a molded rubber grip. The heads are made from drop forged steel to avoid damage and to stand up to long years of impacts. Each side is precision ground for accurate striking points.

    The 36 oz dead blow hammer is built with steel shot internals that delivers a stronger force of impact and prevents rebound. The hammer itself is all built from a high-impact poly jacket that encases the head and handle. This hammer allows you to hammer softer metals, such as aluminum, without damaging the surface or the part itself. The handle has a diamond-shaped grip pattern to prevent your hands from slipping and sliding, even with your hands are covered with oil.

    Part #: 016805sch01aKT
    Price: $22.46 (USD) 
    $29.95 (Sale - Save 25%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Turner BMW 15mm Wheel Spacers (Pair) - Most BMWs (see applications)

    15MM (.59 inch) Wheel Spacer for BMW E24, E28, E30 M3, E31, E32, E34, E36, E38, E46, E60, E63, E82, E83, E87, E90, E91, E92, E93 (E9X), Z3, Z4

    Wheel spacers are the ideal solution to resolve a number of fitment and aesthetic problems --

    • Correct wheel offset issues
    • Achieve a flush fitment instead of the "tucked under" look
    • Clearance the wheel from contact with other components (suspension, brakes, etc).
    • Improve handling and stability by increasing track width

    A spacer fits between the wheel and the hub assembly and pushes the wheel out by the thickness of the spacer. Our wheel spacers are compatible with almost any type of BMW wheel and are a direct fit to the wheel hub (see below for any fitment notes). Longer wheel bolts or wheel studs are required.

    These latest generation of the Turner Motorsport Wheel Spacers represent a total redesign of the wheel spacer concept - a ground-up, clean sheet design based on our years of BMW service and motorsports. We took everything we have learned from our service technicians, customers, and race team crew and built the spacer to beat all spacers. We've been in the BMW wheel spacer business probably longer than anybody and when it came time to make our own spacers, a basic spacer design just wouldn't do. We had to make a spacer that is light weight (for lower unsprung mass), has a tough and durable coating to last through our New England winters, is easily removed (your mechanic will thank you), and is precisely engineered and manufactured for a proper fit on the hub and in the wheel. You won't find a better engineered wheel spacer on the market!

    Turner Wheel Spacer Features --
    + hub-centric design, 1-piece spacer
    + precise tolerance fitment thanks to CAD process and CNC mill machine
    + aerospace grade aluminum  light weight but very strong with a high resistance to corrosion
    + additional military-spec hardcoat for further corrosion resistance
    + innovative Quick Release pockets for easy removal (better than a chamfered back edge)
    + laser engraved size and part number for easy identification
    + stealthy anthracite or black color
    + extended bolt sets in factory-matching black or bright silver finish available (wheel stud kits also available)
    + Turner Motorsport track and street tested!
    + Made in the USA

    Extended Wheel Bolts
    Longer wheel bolts or wheel studs are required for all BMW wheel spacers. Spacers cannot be used with stock bolts. Our extended lug bolts are a very high quality and high grade steel lug bolt (grade 10.9). We offer two finishes to get you just the right look with your wheels - black zinc to maintain a factory BMW appearance or a bright zinc nickel finish to go with polished wheels. Zinc finishes are designed to withstand 700 hours of salt spray testing.

    Spacer Specs:
    (click to expand)
    Spacer Specs:
    bolt pattern:5 x 120
    center bore:72.6mm
    hubcentric?yes
    wheel pad size:normal

    Year & Model Applications
    (click to expand)
    2008-2012 E82 BMW 128i 135 1M
    1988-1991 E30 BMW M3
    1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
    1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
    2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
    2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
    2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
    2007-2012 E93 BMW 328i 335i M3 - Convertible
    1976-1981 E12 BMW 528i 530i
    1982-1988 E28 BMW 524td 528e 533i 535i 535is M5
    1989-1995 E34 BMW 525i 530i 535i 540i M5
    2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i M5
    1982-1989 E24 BMW 633csi 635csi M6
    2004-2010 E63 BMW 645ci 650i M6
    1981-1987 E23 BMW 733i 735i
    1988-1994 E32 BMW 735i 735il 740i 740il 750il
    1995-2001 E38 BMW 740i 740il 750il
    1990-1999 E31 BMW 840i 840ci 850i 850ci 850csi
    1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
    2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
    2009-2016 Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
    Part #: TWH9905015
    Price: $76.46 (USD) 
    $89.95 (Sale - Save 15%)
    Free Shipping Free Shipping
    on orders $199 and up
    StopTech Caliper Piston Rebuild Kits

    Stoptech Big Brake calipers are designed to be serviced and rebuilt just like any factory caliper. The pistons will probably last the life of the car but the seals can become brittle from extreme heat or extreme cold. Sometimes they just get damaged from debris. For racing environments it's best to rebuild the calipers often (maybe even several times a year). At least you should always have spare caliper seals on hand.

    These are the genuine Stoptech caliper seals (dust boots and pressure seals). We sell these to service a PAIR of pistons (1 boot and 1 seal per piston). You will need to measure your existing pistons or seals to order the correct rebuild kits. Sorry, there are too many variables to tell you which pistons you have with only your car info. It's easy to measure and you don't have to remove the pistons from the calipers. Stoptech pistons are metric sized and in 2mm increments. Use the chart below to match your measurments to a rebuild kit.
     

    There are a few ways to determine which caliper seals you need. You can measure from the overall outside diameter of the dust boot (A); the inside diameter of the piston (B); or the outside diameter of the piston body (not the tip protruding from the seal!) (C). If measuring the piston body the whole piston has to come out of the caliper housing. Just measuring the tip will give a false measurement. Remember to measure each of your pistons as piston sizes can vary even within the same caliper. Click the image at left for a larger version.

     

    Use the table below to determine which Stoptech rebuild kit you need:

    Outer Boot
    Diameter, "A"Piston Inner
    Diameter, "B"Piston Outer
    Diameter, "C"Stoptech Kit #

    3611.7026143.99026K

    3813.4528143.99028K

    4015.2030143.99030K

    4216.9532143.99032K

    4418.7034143.99034K

    4620.4536143.99036K

    4822.2038143.99038K

    5023.9540143.99040K

    5225.7042143.99042K

    5427.4544143.99044K

    5629.3046143.99046K


    We sell rebuild kits for a PAIR of pistons - 1 seal and 1 boot per piston. For example -
    For a 4-piston caliper you only need to order 2 rebuild kits.
    For a 6-piston caliper you only need to order 3 rebuild kits.
    But make sure you measure each piston!

    These rebuild kits fit with StopTech caliper pistons only. Sorry, returns are not accepted for opened piston seal kits.

    Part #: TMS213589DK
    Price: $20.25 (USD) 
    $22.5 (Sale - Save 10%)
    Dinan Manual Transmission Alumnium Pedal Cover Set Stylish aluminum and rubber pedal pads add a great high performance look to the interior of your BMW, while providing plenty of grip for even slippery leather soles. The pedal pads feature the Dinan logo and come complete with hardware for a simple installation. Worth 1 point towards your Dinan badge.
    Part #: D700-0000
    Price: $212.40 (USD) 
    $236.00 (Sale - Save 10%)
    Free Shipping Free Shipping
    Quantity:   
    Honest Wash Cross Dressing - Rubber, Plastic, & Vinyl - Cleaner & Conditioner 32oz Take care of your interior and exterior plastic, rubber, and vinyl panels with Cross Dressing by Honest Wash, a multipurpose dressing that cleans, conditions, and gives your parts a glossy finish without leaving behind an oily residue. This helps prevent premature fading and aging on surfaces that have been neglected, making them look like new again.
    Part #: HW30
    Price: $16.19 (USD) 
    $17.99 (Sale - Save 10%)
    Quantity:   
    Grease Lightning - Multipurpose Degreaser -- 32oz Grease Lightning by Honest Wash is the best option to eliminate dirt, grease, and oil on your vehicle. Made from surfactants that are environmentally safe and bio-degradable, Grease lightning lifts and dissolves deposits of contaminants, letting you wife or rinse away stains on both exterior and interior parts of your vehicle. Best used area with heavy amount of dirt or oil such as cloth and carpet interiors, engines and engine bays, undercarriages, wheel wells, truck beds, door jams, and anywhere stubborn fingerprints won't wash off, such as your PlastiDip coating.
    Part #: HW06
    Price: $11.69 (USD) 
    $12.99 (Sale - Save 10%)
    Quantity:   
    Honest Wash Clean & Shine Wheel & Tire Kit

    Keep your wheels/tires looking great with this kit from Honest Wash.

    Kit includes:

    • 32oz bottle of Brake Dust Professional wheel cleaner BDP
    • 32oz bottle of Tire Love tire shine
    • tire shine applicator
    Part #: HWKT-1
    Price: $33.29 (USD) 
    $36.99 (Sale - Save 10%)
    Quantity:   
    Honest Wash Microfiber Wash Mitt The Microfiber Wash Mitt "The Scrubber" works perfectly to wash your entire vehicle, then focus on areas such as the front bumper and hood which are encrusted with bugs and tar. The reverse side of the mitt has a scrubbing mesh that is tough enough to scrub away bugs but soft enough to keep from scratching your paint. It is also lint free because of it polyester construction. With a bit of help from something like Bug Delete spray, you'll have your vehicle contaminant free in no time.
    Part #: HW15
    Price: $5.84 (USD) 
    $6.49 (Sale - Save 10%)
    Quantity:   
    Honest Wash Sample Package

    Honest Wash offer's a line of samples for you to try, and we know you wont be disappointed!

    Samples include:

    • Active Wax 2oz- High quality spray wax.
    • Brake Dust Professional Wheel Cleaner 2oz- Touch-free wheel cleaner
    • Bug Delete 2oz- Bug, tar, and tree sap remover.
    • Car Show Prep 2oz- Quick detail spray.
    • Cross Dressing 2oz- Multipurpose dressing for dashboards, rubber, vinyl, & more.
    • Glass Perfect 2oz- Streak-free, tint safe glass cleaner.
    • Grease Lightning 2oz- Multipurpose degreaser.
    • Tire Love 2oz- Long lasting tire shine.
    • Fat Foamer 8oz- High foaming car wash soap designed for foam cannons or sprayers.
    • HyperMint Wash 8oz- Invigorating car wash soap featuring a blend of mint aromas.
    • Mud Cutter 8oz- Powerful car wash soap designed to remove dirt, clay, and mud buildups
    Part #: HWKT-19
    Price: $26.99 (USD) 
    $29.99 (Sale - Save 10%)
    Quantity:   
    Honest Wash Foam Cannon

    If you are looking for the perfect pressure washer, Honest Wash has the answer. The Foam cannon is exactly what you need to blast off dirt and get your car spotless once again. Just fill the container with soap such as Fat Foamer car wash and shower your car in a bath of high pressure suds to eliminate dirt, grease, and grime with ease.

    Includes a pressure washer adapter and can be used with any pressure wash with a flow rate of 1.5 to 5.3 GPM

    Part #: HW12
    Price: $40.49 (USD) 
    $44.99 (Sale - Save 10%)
    Quantity:   
    Turner Motorsport Ladies' Tank Top Show your support for Turner Motorsport and your favorite BMW race team and parts supplier with these stylish blue cotton Turner Motorsport tank tops. The tanks feature a yellow logo. Available in three sizes.
    Part #: TMSTANK
    Price: $16.96 (USD) 
    $19.95 (Sale - Save 15%)
    Free Shipping Free Shipping
    on orders $199 and up
    Red Line 20w50 Synthetic Engine Oil

    All sets of 12 now 10% off regular price!

    Red Line 20W50 synthetic motor oil. We have been using RedLine Oil in our street cars and race cars for years. Hands-down, it is the Number One brand of high performance lubricant for BMWs. The ultimate high-temperature protection in Red Line engine oils recommended for street use. Good for engines that regularly run very high oil temperatures. Best for engines that run large clearances such as air-cooled engines or large-displacement, all-out racing engines that see occasional street use. Provides 25% more viscosity in bearings than petroleum 20W-50s. Not recommended for use in cold climates where temperatures are at or below 10*F or -12*C. Not recommended for street use in production engines that see sustained oil temperatures below 225*F (those engines should use Red Line 10W-30 or 10W-40).

    Part #: REDLINE26A
    Price: $10.04 (USD) 
    $11.95 (Sale - Save 16%)
    Free Shipping Free Shipping
    on orders $199 and up
    Turner Catch Can drain system

    When installing a catch can on your car, having enough space for maintenance can become an issue. This is why we developed a catch can with a bottom drain option, using this kit you can position the drain at the top or bottom of the vehicle for your convenience. Mounting the valve at the bottom of the car allows for you to empty the catch can easily during an oil change without having to move around too much. 

    Contains:

    • 1 - Plastic drain valve
    • 1 - 90 degree barbed fitting
    • 1 - Straight barbed fitting
    • 1 - 3' section of hose
    • 2 - Hose clamps
    Part #: 022798TMS16KT
    Price: $16.96 (USD) 
    $19.95 (Sale - Save 15%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Complete Turner Baffled Oil Catch Can Kit - Standard Flow 6oz

    When we designed this catch we wanted to have the most function options available, the best separation method, and the easiest to service. The Turner engineered catch cans offer a pre-setup design based ion desired flow direction, however this does not limit you to this flow. The inner baffle orientation can be easily adjusted to flow in both directions in case you decide to move this catch can to a different vehicle. A 4 chamber system  baffle system inside the catch can was engineered to create multiple changes in the direction of airflow within the separator to cause oil droplets to fall out of suspension before exiting the catch can. Having a closed / recirculated design reduces oil ingestion and promotes cleaner emissions and odor-less operation.

    Our catch can was also designed with the idea that the cans fill level can easily be checked with a top mounted dipstick and an optional use bottom drain hole. The drain system comes complete with a valve and hose to be mounted at a lower area of the vehicle so when you're doing an oil change you can drain the catch can.

    Features:

    • 6061-T6 billet machined body, anodized black for lasting protection and appearance
    • Strategically positioned 4 chamber baffle system maximizes oil / air separation 
    • Knurled and black anodized oil dipstick makes inspecting oil volume of reservoir clean and simple
    • Sealed with a pre-installed viton O-Ring
    • Includes 2.5mm allen key to remove baffle plates for cleaning
    • Engineered to create multiple changes in the direction of airflow within the separator to cause oil droplets to fall out of suspension before exiting the catch can
    • Closed / recirculated design reduces oil ingestion and promotes cleaner emissions and odor-less operation
    • Optional use drain hole - drain kit included!
    • Universal mounting kit
    Part #: 022798tms01-05KT
    Price: $161.46 (USD) 
    $189.95 (Sale - Save 15%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Limited Edition #96 Turner Motorsport M6 GT3 Minichamps - 1 Of 402

    Turner Motorsport was created with the vision of bringing ultra high performance BMW accessories to avid enthusiasts at a reasonable price. Will Turner opened the doors to his 6500 square foot R&D facility in 1993 - since then the company has seen incredible growth and accomplishment. Most recently, Turner Motorsport participated in the IMSA United Sportscar Championship. Drivers Jesse Krohn and Jens Klingman were able to pilot the Number 96 Turner Motorsport M6 GT3 through the pack and finish fourth overall during the 2017 season.

        While not on the racetrack, the team at Turner can be found designing and testing new products perform just as well on the track as they do on the street. For example, Turner’s E46 rear subframe reinforcement kit resolves a real world problem, the E46’s rear subframe mounting points, by creating a solution that prevents further damage and can be used to remedy and already cracked subframe area. In this way, an extremely detrimental problem can be repaired or prevented no matter what type of driving style the vehicle endures. This is just one example of the philosophy behind Turner Motorsport being put to work in every product they design.

        When it comes to sourcing elusive motorsport specific parts, Turner delivers again. As an authorized dealer, Turner carries a wide range of racing specific parts from BMW Motorsport. Anything from full conversions, such as the M235iR conversion kit, to the more esoteric offerings like the E30 M3 Evo racing pulley kit.

        Now you can bring home a piece of Turner Motorsport History with this beautifully constructed diecast model of the Turner M6 GTD car. This is the same one driven by Jens Klingman and Bret Curtis at Circuit of the Americas in the 2016 season. Accurate and breathtaking detail are at the forefront of this limited edition 1/43 scale model. Only 402 are left so get yours before the checkered flag drops!

     

     

    Part #: 96M6GTSMINICHAMP
    Price: $72.21 (USD) 
    $84.95 (Sale - Save 15%)
    Free Shipping Free Shipping
    Quantity:   
    Schwaben Strut Nut Socket - 22mm To secure shocks and struts to their mounts, the retaining nut must be torqued to its proper specification using a torque wrench. An improper torque value may result in premature mount failure - or worse. Strut nut sockets allow for the use of an allen wrench to hold the damper shaft while utilizing your 1/2" drive torque wrench on the socket to achieve proper torque.
    Part #: 003046SCH01A-04
    Price: $11.21 (USD) 
    $14.95 (Sale - Save 25%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Liqui Moly Anti-Seize Compound

    Nothing is worse than a seized bolt. You run the risk of rounding off the head or even snapping the bolt all together. This could lead to costly repairs to replace the parts affected or to have the damaged bolt removed. Avoid the head-ache and use this simple anti-seize compound from Liqui-Moly to ensure easy removal of bolts and studs in the future. This specific copper based anti-seize is perfect for high-temp applications such as exhaust bolts and engine components.

    Liqui-Moly is a German chemical company that offers top of the line engine oils, additives, and car care products that are designed to extend the life of your engine and ensure the best lubrication and cleanliness off engine and transmission components possible. With more than 50 years of experience and reviews across the world from magazines and race teams, Liqui-Moly proves time and time again why they are one of the most innovative lead forces of performance automotive chemicals in the world.

    Part #: LM2012
    Price: $8.06 (USD) 
    $8.95 (Sale - Save 10%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben 7/8

    The Schwaben oxygen sensor wrench has a six-point pivot head to provide a secure grip on stubbornly tight oxygen sensors located in awkward, inaccessible locations.

    Features:

    • Premium chrome plated
    • Slotted socket head that slips over the sensor wire
    • Long angled handle for leverage

     

    Part #: FO-78
    Price: $22.46 (USD) 
    $29.95 (Sale - Save 25%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben Pry Bar / Seal Puller Kit - 3 Pieces

    Having an adjustable pry bar really comes in handy when working in tight spaces as well as making seal replacement much easier.

    Features:

    • Three hardened alloy metal bars in 10, 12, and 15 inch lengths, with knurled, non-slip handle grips.
    • Push button release at pry bar pivot allows the pry head to rotate through a wide arc and lock in place again when the button is released.
    • Packaged in a handy molded case for portability and easy organization.

     

    Part #: PB-3PCS
    Price: $37.46 (USD) 
    $49.95 (Sale - Save 25%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben Digital Tire Pressure Gauge

    The digital tire pressure gauge can help you check and correct tire pressures on a regular basis to prevent these problems. Lightweight gauge with a digital display that can measure pressures from 0-150 psi; accurate to 0.10 psi. Display pressure in psi, bar, kg/cm, and kPa.

    Correct tire inflation reduces tire wear and improves vehicle handling and fuel economy. Under inflated tires run hot, wear faster, and reduce fuel economy. They can also illuminate the Tire Pressure Monitoring System (TPMS) warning light on vehicles equipped with the system.

    The gauge has an angled head with a clear digital display and a battery saver features that shuts off the gauge automatically, when not in use. Batteries are included.

    Part #: PJD3238L-2
    Price: $8.21 (USD) 
    $10.95 (Sale - Save 25%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Carbon Fiber License Plate Frame This is a 100% real carbon fiber license plate frame cover. These 3K twill weave carbon fiber license plate frames fit the standard size US license plate. It's perfect for those automobile enthusiasts with carbon fiber parts on their beloved vehicle or just simply wants to add a performance touch.

    Please note that this license plate frame is made of real carbon fiber and not aluminum/ plastic with carbon fiber look, those prints will fade and discolor over time.

    Package will include 1 real carbon fiber license plate frame that fits onto standard size US license plates, screws are not included for the installation.

    Part #: UN-0007
    Price: $33.96 (USD) 
    $39.95 (Sale - Save 15%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben Go-Through Screwdriver Kit - 6 Pieces

    Having a quality screwdriver set is a must in all garages, it doesn't stop at car work, but it can start there.

    Features:

    • Made of durable nickel chromoly, these screwdrivers have thick, comfortable handles and hex bolsters that accept a box wrench for added leverage.
    • Special Go-Through design is made for heavy duty tasks: hardened shafts extend the entire length of the screwdriver, from tip through the handle, where they exit at a rounded striking head.

    The set includes the following screwdriver sizes, housed in a blow molded case for portability and easy organization:

    • 5.5x100mm flat head screwdriver

    • 6.5x150mm flat head screwdriver

    • 8x175mm flat head screwdriver

    • #1x75mm Phillips screwdriver

    • #2x100mm Phillips screwdriver

    • #3x150mm Phillips screwdriver

    Part #: DRA739I
    Price: $22.46 (USD) 
    $29.95 (Sale - Save 25%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Specialty Bit Kit - 100 Pieces

    All the right bits in one box. The perfect assortment to keep the job going.

    Features:

    • 10 fractional SAE hex, 9 Torx® tamper-proof, 9 Torx®

    • 9 Metric hex bits, 9 slotted bits, 8 Pozi-drive, 8 Phillips, 4 square-recess, 4 tri-wing

    • 3 spline, 3 Torq, 3 clutch, wing-nut driver, magnetic bit holder and socket bit holder

    • Made of hardened Chrome Vanadium steel for years of dependable use

    • Packaged in a handy blow molded case with individually marked bit slots for easy organization

    Part #: P-100B
    Price: $16.46 (USD) 
    $21.95 (Sale - Save 25%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben 8-In-1 Oil Drain/Fill Plug Wrench

    The tough swivel heads fit an assortment of hexagonal and square recessed drain plugs. A strong magnet on the wrench handle keeps drain plugs handy until they are ready to be reinstalled.

     

    Features:

    • Made of vanadium steel for strength, with chrome plated, corrosion resistant surface.
    • Hex sizes: 10, 12, 14, 17
    • Square head sizes: 8, 10, 3/8” and ½”
    Part #: W-136PNM
    Price: $14.96 (USD) 
    $19.95 (Sale - Save 25%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben 3/8

    Proper torque is very important when it comes to working on engines. The importance comes from proper sealing and to keep from damaging threads.

    Features:

    • Reversible 3/8"-inch drive click-to-stop
    • Torque range of 5 to 80 ft-lb
    • Accurate to within +/-4%
    Part #: TW-38365
    Price: $27.71 (USD) 
    $36.95 (Sale - Save 25%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Liqui Moly Long Life Grease with MoS2 - 100 grams

    Made specifically for long periods of lubrication for extremely high bearing pressures and high pressure surface contact, this grease with the added MoS2 Anti-Friction modifier is great for things such as c.v. joints, bearings, guides, and spline shafts.

    Long term protection for frictions heavy components.

    Liqui-Moly is a German chemical company that offers top of the line engine oils, additives, and car care products that are designed to extend the life of your engine and ensure the best lubrication and cleanliness off engine and transmission components possible. With more than 50 years of experience and reviews across the world from magazines and race teams, Liqui-Moly proves time and time again why they are one of the most innovative lead forces of performance automotive chemicals in the world.

    Part #: 2003
    Price: $4.46 (USD) 
    $4.95 (Sale - Save 10%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben Deep Well Impact Socket - 27mm

    Durable Impact sockets for hard to remove fasteners safely.

    Features:

    • Brawny ½-inch drive 27mm 12-point socket
    • Specially hardened to take the added abuse from a impact gun, this socket is also coated for added protection and so you can tell it apart from non impact rated sockets
    • Accommodating 53mm depth to accommodate many applications and different length shafts.
    • Made of durable chrome moly steel, this socket is tough enough to get the job done.
    Part #: 003302SCH04A
    Price: $14.96 (USD) 
    $19.95 (Sale - Save 25%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben Deep Well Impact Socket - 36mm

    This large socket is the perfect tool for axle nuts when servicing the axle shafts or wheel bearings.

    Features:

    • ½-inch drive 36mm 12-point socket
    • Specially hardened to take the added abuse from a impact gun
    • Coated for added protection and so you can tell it apart from non impact rated sockets
    • 75mm depth  to accommodate many applications and different length shafts
    • Made of durable chrome moly steel
    Part #: 003302SCH02A
    Price: $14.96 (USD) 
    $19.95 (Sale - Save 25%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben Metric Bubble Flaring Tool Set

    When replacing old corroded brake lines this is a must have tool to get the job done right. Create a bubble flare to match the connection style is an important part of creating the proper seal. Don't forget your tube cutter.

     

    Features:

    • Creates the ISO bubble flare found on European, Japanese and some domestic model brake lines.
    • Includes hardened steel bar and adapters for 4.75mm,6mm,8mm and 10mm tubing.
    • Durable blow molded case for easy transport and organization

     

     

    Part #: 006394SCH01A
    Price: $49.96 (USD) 
    $79.95 (Sale - Save 38%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben LED Underhood Shop Light

    This underhood light was designed especially for automotive under the hood work. Featuring 120 super bright LEDS for complete engine bay illumination. Built from heavy duty materials, Thermoplastic Rubber, Aluminum and ABS . LEDS are fully protected by a polycarbonate transparent lens.To protect the hood from scratches, hooks have a soft foam covering. LEDs are designed to last up to 100,000 hours for years of trouble free service.

    Features:

    • Corded 120 LED's
    • Rugged heavy-duty design for long life.
    • Made from ABS, thermoplastic rubber and aluminum.
    • Polycarbonate transparent lens.
    • Spring loaded built in telescopic mounting brackets hold tight onto hood.
    • Soft padded hooks provide good protection against hood scratches.
    •  Long 15ft power cord.
    • Two working modes : Low beam and high beam illumination.
    • On and off power switch.
    • Working hood width : 48 to 74 in.

     

     

    Part #: 006191SCH01A
    Price: $74.96 (USD) 
    $99.95 (Sale - Save 25%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben 12 Pc Metric Combination Wrench Set

    Quality combination wrenches are a must when doing any kind of automotive work.

    Features:

    • A complete set from 8 to 19 mm 
    • Professional quality wrenches in full length feature open end on one end and 12 pt box on the other
    • Satin finish provides superior feel, slip resistant grip, easy cleanup and inhibits rust
    • Includes sturdy wrench holder for easy storage
    • Limited Lifetime Warranty

     

    Part #: 005989SCH01A
    Price: $44.96 (USD) 
    $59.95 (Sale - Save 25%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben 1/2 If you're looking to remove a stubborn bolt and the smaller hand tools just don't cut, it's time to get a breaker bar. 1/2" Drive for added strength, 24" handle for powerful leverage, and a rounded ergonomic handle so discomfort isn't holding back your strength.
    Part #: 006535SCH01A
    Price: $26.21 (USD) 
    $34.95 (Sale - Save 25%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben 2-pc 56

    Ideal for smaller sports cars with short noses.  Great for quick oil changes and underbody maintenance.

    Please take measurement below before ordering.

     

    Features:

    • Lightweight at only 4 lbs each and Withe handy carrying straps
    •  Will not slip, slide or scoot on any surface and never scratches or marks your floor
    •  100% solid core construction for additional strength
    •  56 " long,12" wide, 8" lift height, at 15 lbs each and a low 10.8 degree incline
    • Great for quick oil changes and underbody maintenance.

       

       

     

     

     

     

    Part #: 006143SCH01A
    Price: $165.00 (USD) 
    $220.00 (Sale - Save 25%)
    Quantity:   
    Schwaben Strut Spring Compressor Set

    Professional Spring Compressor Kit  will compress most styles of strut springs. This is a safe and efficient way to compress strut springs. This set is supplied with everything you need to get the job done like a pro. Each jaw has safety lips to eliminate slip and is designed to fit the pitch of the spring to ensure maximum surface contact between the jaws and the spring, thus eliminating the risk of the compressor slipping around the spring. The spindle is driven by a 21mm hex nut and is not designed to be used with a impact gun. Hand turn the nut with a wrench or hand ratchet.

    Features:

    • Interchangeable jaws are easily changed to correct size for the application
    • Compressor Body Shaft
    • 80-115 mm Yokes
    • 110-150mm Yokes
    • 140-195mm Yokes
    • conical spring adapter 
    • Blow molded case 
    • Maximum jaw opening is 300mm
    Part #: 013845sch01A
    Price: $149.96 (USD) 
    $199.95 (Sale - Save 25%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Brembo Calipers F40, F50, B, H, GT1 - Street Brake Pad Set - StopTech Street Performance The StopTech Street Performance brake pads just may be the best all-around pad on the market today. Manufactured from a proprietary para-aramid material (similar to Kevlar) that works well when cold, produces a strong initial bite, fade-resistant on the track, and low noise and low dust. It's unbeatable performance for the price! The Street Performance compound is standard in all StopTech big brake kits and are now available for your Brembo calipers.

    This pad set fits the following Brembo 4-piston calipers:
    F40 / F50 / Type B / Type H / GT1 / Monobloc P

    F40 calipers are found in many Brembo GT Big Brake Kits, including these BMW models:
    2008-2012 E82 BMW 128i 135i 1M Coupe
    1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
    1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
    2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
    2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
    2007-2013 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
    2007-2013 E93 BMW 328i 335i M3 - Convertible
    2012+ F30 BMW 328i 335i - Sedan
    1989-1995 E34 BMW 525i 530i 535i 540i M5
    1997-2003 E39 BMW 525i 528i 530i 540i M5
    2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i M5
    2010+ F07 BMW 535i GT, 535i xDrive GT, 550i GT, 550i xDrive GT
    2011+ F10 BMW 528i 535i 535i xDrive 550i 550i xDrive M5
    2004-2011 E63 BMW 645ci 650i M6
    2012+ F13 BMW 640i 650i
    1988-1994 E32 BMW 735i 735il 740i 740il 750il
    1995-2001 E38 BMW 740i 740il 750il
    2002-2008 E65 BMW 745i 745li 750i 750li 760i 760li
    2009+ F01 BMW 740i 740li 750i 750li 750i xDrive 750li xDrive 760li
    1990-1999 E31 BMW 840i 840ci 850i 850ci 850csi
    2004-2010 E83 BMW X3 2.5i X3 3.0i X3 3.0si
    2011+ F25 BMW X3 xDrive28i X3 xDrive35i
    2000-2006 E53 BMW X5 3.0i X5 4.4i X5 4.6is X5 4.8is
    2007-2013 E70 BMW X5 3.0si X5 4.8i X5 xDrive30i X5 xDrive35d X5 xDrive35i X5 xDrive48i X5M
    2008+ E71 BMW X6 xDrive35i X6 xDrive50i X6M
    1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
    2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
    2009+ Z4 BMW Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
    Part #: TMS16482
    Price: $74.65 (USD) 
    $82.95 (Sale - Save 10%)
    Quantity:   
    Compact European Pressure Brake Bleeder

    Need to bleed your brakes in the near future? This Compact European Pressure Brake Bleeder is perfect for the job and has many features that makes the job significantly easier. It has all of the features of the Schwaben full sized brake bleeder kit.

    Features:

    • 45 mm euro master cylinder adapter.
    • Hand held pump with 30 psi gauge .
    • 36" long hose on pump to bottle.
    • 22" long hose from bottle to master cylinder cap adapter.
    • Convenient hook on fluid bottle allows bottle to hang above master cylinder, out of the way.
    • Bottle has a pressure relief valve.
    • Includes 12" waste oil tube for bleeder.
    • 400cc Container
    Part #: 018222SCH01A
    Price: $20.96 (USD) 
    $27.95 (Sale - Save 25%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Cross-Drilled Brake Rotors - Front - E12, E23, E24 (pair) FRONT cross-drilled rotors/discs; priced by the pair;
    The natural enemy of braking performance is heat. When temperature levels reach critical levels, a thin layer of gasses actually prevent the brake pads from making complete contact with the rotor friction surface. The addition of cross-drilling the friction surface promotes the evacuation of these gasses and improves stopping performance and pedal feel. TMS cross drilled rotors result in improved braking performance and look great too! All TMS cross drilled rotors are made to exacting standards by the worlds leading brake manufacturers. Each part is then analyzed for its specific application and design. Engineers then determine the optimal drilling pattern to maximize stopping power. These patterns are then cut into the rotor using today's most advanced CNC machines. This level of quality control ensures that each TMS High Performance rotor will perform to the highest levels every time under all driving conditions. All TMS cross-drilled rotors feature counter-sunkholes that reduce stress risers and fractures.

    This item fits the following BMWs:
    1979-1981 E12 BMW 528i
    1976-1981 E12 BMW 530i
    1976-1982 E24 BMW 630csi 633csi 635csi
    1977-1982 E23 BMW 733i
    Part #: 34111163130CD
    Price: $89.90 (USD) 
    $139.90 (Sale - Save 36%)
    Quantity:   
    Turner Motorsport 16 oz. Pint Glass Combine your love of Motorsport and beer with this go-to glass for beer enthusiasts. This 16 oz. pint glass has an iconic cylindrical shape that tapers toward the bottom for a simple style that's sure to please. It's perfect for serving most types of beers, including ales, IPAs, stouts, and lagers. Use it for cider, soda and ice water too! This glass is great for virtually any cold beverage with a versatile 16 oz. size.

    Part #: TMS-PINTGLASS
    Price: $5.09 (USD) 
    $5.99 (Sale - Save 15%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Turner Loaded Backpack Gift Package

    Pick up our rugged OGIO backpack along with some Turner goodies and pocket nearly $25 in savings! Spoil yourself this season!

    Our "Stuffed Backpack" package includes:
    + $50 Turner Gift Certificate
    + Turner OGIO Backpack
    + Turner Pint Glass
    + Turner Cap
    + Turner Keychain
    + Turner Motorsport Sticker Sheet

    Part #: GP153
    Price: $115.86 (USD) 
    $140.00 (Sale - Save 17%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Turner Motorsport Snapback Baseball Hat One size fits all, embroidered baseball cap. The hats have "Championship BMW Race Team" on the back and the Turner logo on the left front. 80% Acrylic and 20% Wool.
    Part #: TMS224334
    Price: $21.21 (USD) 
    $24.95 (Sale - Save 15%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Turner Motorsport Holiday Ornament This is the "Turner Blue" ornament to show off your enthusiasm for motorsport! The colorful blue ornamental ball perfectly displays the Turner Motorsport logo and looks great on any tree or holiday decoration. This ornament is 3.25" diameter and made of non breakable abs plastic.
    Part #: TMS208377
    Price: $8.46 (USD) 
    $9.95 (Sale - Save 15%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Brake Duct Hose Kit - 3 inch with clamps If you are adding fully functional brake ducts to your track or race car, this hose kit is a must. It includes two 4 foot lengths of high-temp duct hose and 4 appropriate sized hose clamps. This is the same duct hose we use in our reknowned racing brake duct kits & our championship winning BMW race cars. This is the best suited and highest quality hose for the job. We wouldn't use anything less -- would you?
    Part #: TBR9962303
    Price: $76.46 (USD) 
    $89.95 (Sale - Save 15%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben Strut Nut Socket - 24mm To secure shocks and struts to their mounts, the retaining nut must be torqued to its proper specification using a torque wrench. An improper torque value may result in premature mount failure - or worse. Strut nut sockets allow for the use of an allen wrench to hold the damper shaft while utilizing your 1/2" drive torque wrench on the socket to achieve proper torque.
    Part #: 003046SCH01A-05
    Price: $11.21 (USD) 
    $14.95 (Sale - Save 25%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben Strut Nut Socket - 18mm To secure shocks and struts to their mounts, the retaining nut must be torqued to its proper specification using a torque wrench. An improper torque value may result in premature mount failure - or worse. Strut nut sockets allow for the use of an allen wrench to hold the damper shaft while utilizing your 1/2" drive torque wrench on the socket to achieve proper torque.
    Part #: 003046SCH01A-01
    Price: $11.21 (USD) 
    $14.95 (Sale - Save 25%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben Strut Nut Socket - 21mm To secure shocks and struts to their mounts, the retaining nut must be torqued to its proper specification using a torque wrench. An improper torque value may result in premature mount failure - or worse. Strut nut sockets allow for the use of an allen wrench to hold the damper shaft while utilizing your 1/2" drive torque wrench on the socket to achieve proper torque.
    Part #: 003046SCH01A-03
    Price: $11.21 (USD) 
    $14.95 (Sale - Save 25%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Wheel Storage Rack With Casters

    Now you can stack your extra wheels without the danger of scratches and scuffs. This wheel storage rack keeps your wheels spaced apart, and being on locking casters, allows you to easily move the whole set anywhere in your garage or shop at one time. Sturdy steel construction and a wide base means this wheel rack won't tip over. Holds up to 275 lbs - enough for most any wheel & tire set.

     

     

    Fits up to 8½" wide wheels, depending on offset

    Part #: 003639SCH01A
    Price: $41.21 (USD) 
    $54.95 (Sale - Save 25%)
    Free Shipping Free Shipping
    Quantity:   
    Wall-Mounted Wheel & Tire Storage Rack

    As any mechanic either at home or in a shop knows, there is rarely enough usable floor space. At least with a wall mounted tire rack you can count on the spare tires to be out of your way. Space is not the only factor for choosing a wheel storage product like this, most people don't realize that a concrete floor actually draws moisture leaving your tires to dryout even faster.


    Features:

    • Adjustable links allow you to store any size from 12" wheels to 19" wheels with tires
    • Folds flat against the wall when not in use to maximize your usable space
    • Supports up to 250 lbs and weighing in at only 20 lbs itself
    • 46" wide storage area (holds up to four 11½" wide tires)
    • Sturdy steel construction
    • Mounting holes spaced 48" apart for mounting to standard center studs
    Part #: 003638SCH01A
    Price: $44.96 (USD) 
    $59.95 (Sale - Save 25%)
    Free Shipping Free Shipping
    Quantity:   
    Schwaben Remote Starter Switch

    Great for compression tests, aligning timing marks, belt installation and much more.

    Features:

    • High 20 amp rating.
    • 5 ft heavy duty leads.
    • Convenient hot circuit indicator light.
    • Non-slip rubber grip.

     

    Part #: 010611SCH01A
    Price: $22.46 (USD) 
    $29.95 (Sale - Save 25%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben Professional Magnetic Camber/Caster Gauge

     Make precision camber and caster adjustment easily and quickly. 

    Can be mounted directly to the hub on some cars or a wheel mount kit.

    Features:

    • Reads camber from +6° to -6° accurate to 1/4°.
    • Caster readout from +12º to -4º in 1/2º increments.
    • Strong magnetic adapter.
    • Long lasting black powder-coated finish.
    • Comes with silver carrying case with foam insert for storage and on the go adjustments
    Part #: 010887SCH01A
    Price: $104.96 (USD) 
    $139.95 (Sale - Save 25%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben 5

    The Schwaben Pistol Grip Locking Pliers, a unique pistol style that is ideal in locations that do not allow the use of regular locking pliers.

    Features:

    • The hammer-like lock release is easily pressed in tight locations giving maximum usability to the user
    • Durable, rubberized grip covers provide a comfortable, non-slip grip to ensure your hands have a solid hold at all times
    • Quickly and easily adjust the gate of the jaws for a secure clamp with the easy to use barrel adjuster
    Part #: 014565SCH02A
    Price: $26.21 (USD) 
    $34.95 (Sale - Save 25%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben 90 Piece Zippered Tool Bag Kit

    Use it in your garage or take it to the track. Contains our most popular hand tools for your European vehicle so you are always prepared.

    Features:

    • Metric 3/8" Drive Socket Set
    • 3/8" Drive Ratchet
    • 8-19 mm Combination Wrench Set
    • External Torx Socket Set
    • 4 pc Plier Set
    • 4 pc 3/8" Extension Set
    • 46 pc 1/4" Drive Set
    • Tool Bag
    Part #: 014121sch01aKT1
    Price: $223.20 (USD) 
    $297.60 (Sale - Save 25%)
    Free Shipping Free Shipping
    Quantity:   
    Replacement StopTech 332x32mm Rotors for Big Brake Kits - Left & Right Pair Replacement StopTech AeroRotor for big brake kits - 332mm diameter, 32mm thickness. Choose from either slotted or cross-drilled and standard finish or corrosion-resistant zinc coating. Comes with new mounting hardware to re-use the original StopTech mounting hat. This is for a Left and Right Pair.

    Size: 332x32mm
    Type: Gas-Slotted or Cross-Drilled
    Finish: standard finish (no coating), or zinc coating
    Fitment: Left and Right Pair
    Applications: Fits any StopTech Big Brake Kit that uses the 332x32mm disc.
    Part #: ST0PTECH332X32
    Price: $586.71 (USD) 
    $651.9 (Sale - Save 10%)
    Free Shipping Free Shipping
    on orders $199 and up
    Turner Motorsport Double Win T-shirt 2013 These 100% cotton t shirts feature the #94 and #96 Turner Motorsport BMW M3s as raced in the Grand Am Series on the back with the Turner Motorsport Logo on the front. Available in sizes Small-XXL.
    Part #: TMS338546
    Price: $14.99 (USD) 
    $ (Sale - Save 0%)
    Free Shipping Free Shipping
    on orders $199 and up
    Upper Spring Hats/Perches (Pair) - 2.25 Inch / 16mm Pin / Square Seat Made in the USA These aluminum upper spring hats are for coil over struts with a 2.25" coil over spring. The specs are listed below; match the hat specs with your spring and strut. For a proper fitment you must confirm the spring hat matches the strut pin, especially on high-end motorsport struts.

    Spring I.D.Strut Pin Diam.Strut Pin Seat
    2.25"16mmsquare

    Part #: TSU998062A
    Price: $67.96 (USD) 
    $79.95 (Sale - Save 15%)
    Free Shipping Free Shipping
    on orders $199 and up
    Turner Motorsport 12x1.5 Full Thread Wheel Stud - Most BMWs 1984-2011 (E30, E36, E46, E9X)
    • 55MM, 75MM, 90MM LENGTHS
    • Black phosphorous corrosion resistant coating
    • "OEM" appearance
    • Full-length threads for more nut engagement in tight spaces
    • Long shank for good brake rotor alignment
    • Heat-treated aircraft quality alloy steel

    Wheel studs are among the safest and most beneficial upgrades you can make on a track car. Not only are wheel studs safer than wheel bolts but they make changing wheels/tires much easier. One of the frustrating things about installing your wheels on the hub is that it's difficult to line up the wheel on the bolt holes. As wheels get larger but also heavier it's even more trouble. Add in a wheel spacer and the task is twice as hard. BMW does produce a wheel alignment pin for this purpose but if you're changing wheels often a stud conversion is the better way to go.

    These wheel studs are the same as our hugely popular Bullet Nose studs but with threads along the full length of the stud. This gives you more threaded area for tightening wheel nuts or allows the use of a closed-end wheel nut. These also have a more OEM appearance. Although these are a lower cost version of our Bullet Nose studs, they are every bit as strong, durable, and safe. The Bullet Nose is an upgrade because it's easier to install and almost impossible to cross-thread a nut.

    Not all wheel studs are created equal. We don't take a manufacturer's generic wheel stud from their catalog and call it our own. Turner Wheel Studs are designed to our own specifications and manufactured for us exclusively. Beware of cheaper studs on the market! We have seen other studs similar to our own designs that are not a true BMW fitment. There are differences that we have ironed out over our years of selling wheel studs for the BMW market. Our stud prices may be slightly higher than the rock bottom prices on the web but we promise that it's a higher quality.

    Sold per stud.

    Part #: TWH9950X
    Price: $5.31 (USD) 
    $6.25 (Sale - Save 15%)
    Free Shipping Free Shipping
    on orders $199 and up
    Seasonal Tire Tote (Set of 4) Tire carrying and storage system that alleviates the mess and strain of seasonal tire change. 

    Benefits:  
     + Protects clothing from tire and brake residue
     + Easier to carry tire
     + Protects vehicle interior from tire & brake residue
     + Organizes garage
     + One size fits all
     + Extends the life of the tire
     + Machine Washable
    + Rugged long lasting construction

    Kit Includes : - Four Tire Bags, fit most passenger vehicles. (22" through 31" tire)
    Part #: 36
    Price: $49.95 (USD) 
    Free Shipping Free Shipping
    on orders $199 and up
    Turner BMW 20mm Wheel Spacers (Pair) - Most BMWs (see applications)

    20MM (.79 inch) Wheel Spacer for BMW E24, E28, E30 M3, E31, E32, E34, E36, E38, E46, E60, E63, E82, E83, E87, E90, E91, E92, E93 (E9X), Z3, Z4

    Wheel spacers are the ideal solution to resolve a number of fitment and aesthetic problems --

    • Correct wheel offset issues
    • Achieve a flush fitment instead of the "tucked under" look
    • Clearance the wheel from contact with other components (suspension, brakes, etc).
    • Improve handling and stability by increasing track width

    A spacer fits between the wheel and the hub assembly and pushes the wheel out by the thickness of the spacer. Our wheel spacers are compatible with almost any type of BMW wheel and are a direct fit to the wheel hub (see below for any fitment notes). Longer wheel bolts or wheel studs are required.

    These latest generation of the Turner Motorsport Wheel Spacers represent a total redesign of the wheel spacer concept - a ground-up, clean sheet design based on our years of BMW service and motorsports. We took everything we have learned from our service technicians, customers, and race team crew and built the spacer to beat all spacers. We've been in the BMW wheel spacer business probably longer than anybody and when it came time to make our own spacers, a basic spacer design just wouldn't do. We had to make a spacer that is light weight (for lower unsprung mass), has a tough and durable coating to last through our New England winters, is easily removed (your mechanic will thank you), and is precisely engineered and manufactured for a proper fit on the hub and in the wheel. You won't find a better engineered wheel spacer on the market!

    Turner Wheel Spacer Features --
    + hub-centric design, 1-piece spacer
    + precise tolerance fitment thanks to CAD process and CNC mill machine
    + aerospace grade aluminum  light weight but very strong with a high resistance to corrosion
    + additional military-spec hardcoat for further corrosion resistance
    + innovative Quick Release pockets for easy removal (better than a chamfered back edge)
    + laser engraved size and part number for easy identification
    + stealthy anthracite or black color
    + extended bolt sets in factory-matching black or bright silver finish available (wheel stud kits also available)
    + Turner Motorsport track and street tested!
    + Made in the USA

    Extended Wheel Bolts
    Longer wheel bolts or wheel studs are required for all BMW wheel spacers. Spacers cannot be used with stock bolts. Our extended lug bolts are a very high quality and high grade steel lug bolt (grade 10.9). We offer two finishes to get you just the right look with your wheels - black zinc to maintain a factory BMW appearance or a bright zinc nickel finish to go with polished wheels. Zinc finishes are designed to withstand 700 hours of salt spray testing.

    Spacer Specs:
    (click to expand)
    Spacer Specs:
    bolt pattern:5 x 120
    center bore:72.6mm
    hubcentric?yes
    wheel pad size:normal

    Year & Model Applications
    (click to expand)
    2008-2012 E82 BMW 128i 135 1M
    1988-1991 E30 BMW M3
    1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
    1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
    2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
    2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
    2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
    2007-2012 E93 BMW 328i 335i M3 - Convertible
    1976-1981 E12 BMW 528i 530i
    1982-1988 E28 BMW 524td 528e 533i 535i 535is M5
    1989-1995 E34 BMW 525i 530i 535i 540i M5
    2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i M5
    1982-1989 E24 BMW 633csi 635csi M6
    2004-2010 E63 BMW 645ci 650i M6
    1981-1987 E23 BMW 733i 735i
    1988-1994 E32 BMW 735i 735il 740i 740il 750il
    1995-2001 E38 BMW 740i 740il 750il
    1990-1999 E31 BMW 840i 840ci 850i 850ci 850csi
    1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
    2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
    2009-2016 Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
    Part #: TWH9905020
    Price: $83.26 (USD) 
    $97.95 (Sale - Save 15%)
    Free Shipping Free Shipping
    on orders $199 and up
    O2 Sensor Bung and Plug Made in the USA O2 Sensor Bung and plug. This weld-in bung allows an O2 sensor to be screwed into your exhaust system. It's required for custom exhaust systems, and is also useful for air/fuel ratio measurements when dyno testing. A threaded plug is included to cap off when not in use. Bung and cap/plug are both 100% stainless steel. The bung and plug are also available separately (in case you don't need both). Simply choose your option below.
      TMS Oxygen Sensor Bung Specs:
    1. Material 304 stainless steel
    2. 1.00" / 25.4mm OD
    3. 0.50" / 12.7mm Tall
    4. Thread size and pitch M18x1.5
      TMS O2 Sensor Plug & Crush Ring Specs
    1. Material 304 stainless steel
    2. 10mm female hex for install and removal
    3. Thread size and pitch M18x1.5
    4. Copper Crush Ring for leak free installation
       Install Tips
    • Locate bung as close to engine a possible, without exceeding the maximum operating temperature for the O2 sensor. The suggested location is just down-stream of the merge-collector on each bank of cylinders.
    • Sensors located after upstream exhaust system leaks or too close to exhaust outlets are susceptible to poor readings or influence of ambient air
    • O2 Sensors exposed to exhaust gasses with too high amount of un-burnt fuel can lead to misleading readings. A possible lean reading.
    • Locate sensor/bung 90° to exhaust gas stream.
    • Locate sensor/bung in tube with a minimum of 10° up angel to prevent liquid build up in sensor element.
    • Use stainless steel welding wire or rod when installing bung.
    • Do not have bung plug or a oxygen sensor installed when welding bung in place.
    • Welding can distort the bung so it is recommended you chase/tap the threads of the bung after welding.
    • When installing O2 sensor or plug, use an O2 sensor compatible high temperature resistant grease on the threads.
    • Use tightening torque suggested by O2 senor manufacturer.
    Part #: TEN9949O2S
    Price: $5.10 (USD) 
    $6 (Sale - Save 15%)
    Free Shipping Free Shipping
    on orders $199 and up
    Mega-Stuffed Backpack Gift Package Our favorite 2016 BMW gift ideas, conveniently bundled in our new backpack. Can't decide which Turner Motorsport works best? Get them all and save $137! This makes a great package for one or more Bimmer fans in your family.

    Our "Mega Stuffed Backpack" package includes:
    + $200 Turner Gift Certificate
    + Turner OGIO backpack
    + Turner Pint Glass
    + Turner Keychain
    + Turner Flexfit Baseball Cap
    + Turner Knit Cap
    + Turner 1/4 Zip Pullover
    + "Adrenalin" BMW Motorsport DVD
    + Minichamps Turner Z4 1/43 model
    + Turner Motorsport Sticker Sheet

    Choose a hat option and pullover size from the options below.
    Part #: GP155
    Price: $348.03 (USD) 
    $360.01 (Sale - Save 3%)
    Turner Motorsport Hooded Sweatshirt (Hoodie) Hoodies are here! Stay warm with our official TMS pullover hooded sweatshirt. Warm, thick, and comfy -- without being bulky. Features the Turner Motorsport logo across the chest and your choice of TMS car number on the back. Show your support for either the #95 car (Turner/Salama/Seldorf), #96 (Auberlen/Bell) or #97 (Hand/Gleason).

    These are Hanes Ultimate Cotton, constructed with a heavyweight 10.1 oz. patented 90/10 cotton/polyester blend that is shrink resistant (it's still normal for these to shrink up to a half-size once they've been washed/dried a couple times). Complete with hood drawstrings, spandex trim in cuffs and waistband. Select your size below.
    Part #: TMSHOODIE
    Price: $33.96 (USD) 
    $39.95 (Sale - Save 15%)
    Free Shipping Free Shipping
    on orders $199 and up
    Turner Motorsport Z4 Racecar 2014 GTD Champions T-Shirt - Black Celebrate our 2014 GTD Championship with the Z4 GTD race car. The Turner Motorsport BMW Z4 GTD won 4 races, and had 6 podiums and 10 top-ten finishes in the TUDOR United SportsCar Championship. This high quality 100% cotton black t-shirt features the Turner Z4 GTD on the back and Turner logo on the front.

    Get yours today, these are limited in quantity and won't last long. Choose size below.
    Part #: G200-WIN
    Price: $9.95 (USD) 
    $24.95 (Sale - Save 60%)
    Free Shipping Free Shipping
    on orders $199 and up
    Schwaben Exhaust Pipe Cutter

    Custom exhaust work in the plans? The Schwaben Exhaust Pipe Cutter will help you cut out old pipe or cut down new pipe with ease. It can cut any pipes from 3/4" to 3" in diameter and cuts pipe with only 1/4 turn adjustments, thanks to 15 blades that effectively cut the entire pipe with little movement. This is great for tight to reach places that prevents you from using more traditional non-specialty tools.

    Features:

    • Cuts from 3/4" pipe up to 3" pipe
    • 15 cutting blades
    • Rubber covered handles for grip and comfort
    Part #: 019238SCH01A
    Price: $29.96 (USD) 
    $39.95 (Sale - Save 25%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
     Colored Roundel Emblem Cover Set - Hood/Trunk/Wheels/Steering Wheel Made in the USA Help your BMW stand out from the crowd with our colored Roundel emblem covers. Whether you are looking to match your paint color, hightlight your interest in motorsports, or freshen the look of your car, Roundel decals offer a great way to personalize your BMW. These easy to install vinyl decals adhere over the existing Roundel emblems. The kit includes colored quadrants to cover the hood emblem, trunk emblem, steering wheel and 4 wheel emblems - and fender emblems for Z3 and Z4. These are made to withstand all weather conditions and are removed with ease if required.

    Currently we offer the following colors; Jet Black , Matte Black , Bright Red , Imola Red , Panther Pink , Black Sapphire/Jerez Black/Carbon Black Metallic, Printed Carbon Fiber - Black, Dynamic Carbon Fiber - Black, Dynamic Carbon Fiber - Silver. Additional colors are available to closely match your BMWs paint or in a variety of other colors. If you don't see the color you are looking for please email or call us.

    Note: These are vinyl overlays for the existing roundels. Actual roundels are not included. We have BMW Roundel emblems available here.

    This item fits the following BMWs:
    These emblem covers fit all BMW years and models including:
    E30, E36, E46, E90, E92, E34, E39, E60, F10, E63, E38, E65, F01, X3, X5, X6, Z3, Z4 and more.
    Part #: TMS4790
    Price: $12.71 (USD) 
    $14.95 (Sale - Save 15%)
    Free Shipping Free Shipping
    on orders $199 and up
    Racing Seat Belt Harness Retaining Guide Collars (Pair) These little guys are one of our favorite final touches on a race car build. After years of requests, we now are able to supply these for more than just our race team's use. These aluminum collars bolt on your roll cage's harness bar (or any bar for that matter) and help keep your seat belt harnesses from sliding on the bar. You can use just one pair to accomplish this, or 2 pairs (4 collars total) for the best looking and functioning install. The beauty of these collars (besides being lightweight and looking clean) is that they can be adjusted from side to side, which is convenient if you change you seat or belt configuration. They can also be used for other applications as well, such as taming that helmet net strap. If you're looking for a clean, professional looking solution, these are a superb final touch. As used on our own Championship winning TMS E46 and E90 race cars.

    We offer these guide collars in two sizes: for 1.5" OD roll bar tubing or for 1.75" OD roll bar tubing (choose your size below). Check your cage tubing diameter especially if your car was built in Europe as they used metric tubing sizes. If you need a metric size, contact us. Also measure with paint applied, not bare tubing. These are sold by the pair, so be sure to modifying your quantity below (or in the cart) if you need them for both seats.
    Part #: TIN9903150
    Price: $33.96 (USD) 
    $39.95 (Sale - Save 15%)
    Free Shipping Free Shipping
    on orders $199 and up
    Upper Spring Hats/Perches (Pair) - 2.25 Inch / 16mm Pin / Tapered Seat Made in the USA These aluminum upper spring hats are for coil over struts with a 2.25" coil over spring. The specs are listed below; match the hat specs with your spring and strut. For a proper fitment you must confirm the spring hat matches the strut pin, especially on high-end motorsport struts.

    Spring I.D.Strut Pin Diam.Strut Pin Seat
    2.25"16mmtapered

    Part #: TSU9980548
    Price: $67.96 (USD) 
    $79.95 (Sale - Save 15%)
    Free Shipping Free Shipping
    on orders $199 and up
    Schwaben Complete 26 pc Stubby Socket Driver Set

    This great Schwaben kit is designed to work on todays modern cars. Set contains popular torx and triple square bits found on a lot of German and other European cars. Designed to operate in minimal space situations.

    Set Contains:

    • 6 stubby triple square with 12 mm hex to be used with included 12 mm ratcheting wrench. 4 mm, 5 mm, 6 mm, 8 mm and 10 mm. 
    • 4 stubby triple square with 19 mm hex to be used with included 19 mm ratcheting wrench.. 12 mm regular and  14 mm, 16 mm and 18mm tamper proof triple square.
    • Set also includes a 3/8" drive 12 mm socket and 1/2" drive 19 mm socket to fit bits. Good for using bit with ratchet or torque wrench.
    • 9 torx bits 10 to 70 torx 
    • Includes blow molded case with sturdy foam insert to keep every thing in order.
    Part #: 019297SCH01A
    Price: $56.96 (USD) 
    $75.95 (Sale - Save 25%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Driveshaft - E12 528i, E24 633csi - Manual Transmission

    Got a vibration through the driveline on your BMW? Did you know that the u-joints are not replaceable on a factory driveshaft?Our remanufactured driveshafts allow for future replacement of u-joints and are rebuilt to a higher specification than the factory driveshaft.We start with OEM u-joints and then machine yokes onto the driveshaft to allow for future u-joint replacement.All bushings, universal joints, center bearings are replaced with new hardware (flex discs are not included but available separately).The whole unit is then dynamically balanced on a precision Axiline Balancer..

    Included in the price of the driveshaft is UPS return label, so you can return your core for refund quickly, easily and without additional expense.

    This item fits the following BMWs:
    1979-1981 E12 BMW 528i
    1980-1982 E24 BMW 633csi

    Includes $75.00 core charge to be refunded on return of your rebuildable core.

    Part #: 036X
    Price: $569.07 (USD) 
    $632.30 (Sale - Save 10%)
    Quantity:   
    Dinan Automatic Transmission Alumnium Pedal Cover Set

    Stylish aluminum and rubber pedal pads add a great high performance look to the interior of your BMW, while providing plenty of grip for even slippery leather soles. The pedal pads feature the Dinan logo and come complete with hardware for a simple installation. Worth 1 point towards your Dinan badge.

    For cars with automatic transmission.

    Part #: D700-0001
    Price: $165.60 (USD) 
    $184.00 (Sale - Save 10%)
    Quantity:   
    Dinan SMG/DCT Alumnium Pedal Cover Set

    Stylish aluminum and rubber pedal pads add a great high performance look to the interior of your BMW, while providing plenty of grip for even slippery leather soles. The pedal pads feature the Dinan logo and come complete with hardware for a simple installation. Worth 1 point towards your Dinan badge.

    For SMG and DCT transmission cars.

    Part #: D700-0002
    Price: $137.70 (USD) 
    $153.00 (Sale - Save 10%)
    Quantity:   
    Wheel Spacer Test Fitment Kit

    Unsure of what size spacer will work best for you? This professional kit includes 1mm, 2.5mm, 5mm, 10mm, and 15mm spacers with wheel studs and nuts for you play with. These are not the same spacers that we sell and they cannot be used to drive on. But with the studs installed the car can be lowered to the ground and rolled to check for clearances. These test fit spacers are drilled to fit the standard BMW 5x120 bolt pattern as well as 4-lug 4x100 (and VW/Audi bolt patterns too). You can stack spacers to achieve the perfect clearance. When you're ready call us to order the spacers you need (Turner spacers come in 3mm, 5mm, 7.5mm, 10mm, 12.5mm, 15mm, 17.5mm, 20mm, 25mm, and 30mm spacer thicknesses).

    These spacers are not for driving on. They lack the hubcentric lip that BMW wheels are designed to work with. Driving on studs alone will lead to a failure.

    Two ways to buy -

    • Own. Just as it says, you buy this kit to own. Perfect for shops or race teams that change wheels or brake components often. For shops you can measure wheel clearance and order the correct spacers the first time around (no wasting inventory or paying return shipping). Note: Kits purchased to Own are not returnable for refunds.
    • Rent. Pay the full price but get $110 as a store credit when you return the kit. We keep a modest $19.95 fee for the service. Perfect for DIY and enthusiasts who only need the Test Kit once. Use your store credit to purchase your spacers (or anything else from our catalog).

     

    Wheel Spacer FAQ:
    How to measure for wheel spacers
    Wheel spacer encyclopedia

     

    Part #: 001202ECS03
    Price: $110.46 (USD) 
    $129.95 (Sale - Save 15%)
    Free Shipping Free Shipping
    on orders $199 and up
    ECS Ultimate 3-Way Tow Hook/No Holes License Plate/Camera Mount

    This multifunctional front mount is 3 products in one! This front mount can be set up as a -

    • No Holes license plate bracket
    • Camera mount
    • 2" tow hook
    • Or almost any combination of the above*

    Now your license plate bracket can double as a mount for your Go-Pro or similar camera system. Or a tow hook with the camera for track use. Running one or multiple combinations is easy since each piece is mounted to the existing tow hook receptacle behind the bumper. No modification is required! Each piece threads into the tow hook for easy install and removal. Metric Allen keys are included. ECS engineers were unimpressed wtih other plate and holder materials on the market so all pieces in their kit are made from stainless steel or 4140 alloy steel with a tough resilient coating (aluminum and plain sheetmetal were found to deform after repeated use). Simulations show this plate mount to withstand speeds of up to 150mph!

    This kit was developed for the front but may also fit on some rear tow hook locations. A different extension may be required.

    * - the only combination not possible is the tow hook with the license plate bracket.

     

    Part #: 001912C0102A
    Price: $178.42 (USD) 
    $209.9 (Sale - Save 15%)
    Free Shipping Free Shipping
    Liqui Moly Manual Transmission & Differential Fluid 75w90 - 1 Liter

    Interval oil changes are often recommended for manual transmissions to ensure long-term reliability and maximum wear prevention. Fresh oil will prevent small amount of metallic build up from preventing fluid flow and clogging filters and narrow channels. 

    Check your owner's manual to determine when it is best to flush your system and what type and weight fluid to use when re-filling your system. 

    This 75w90 weight oil's multi-viscosity are perfect for ensuring protection in all climates and its synthetic composition allows for smother shifts.

    Meets Specifications: API GL-4+

    Part #: 20012
    Price: $15.26 (USD) 
    $16.95 (Sale - Save 10%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Turner Motorsport Mens Championship Long Sleeve T-Shirt - 2014 Celebrate our championship victories from the past several years including our most recent 2011 GS Championship. These shirts are official Turner wear, as seen worn by employees and our championship winning race team personnel. Turner Motorsport logo on the front with images of the various championship winning cars on the back.
    Part #: 920-2014X-L
    Price: $16.96 (USD) 
    $19.95 (Sale - Save 15%)
    Free Shipping Free Shipping
    on orders $199 and up
    OEM Style Hose Clamps Hose clamps for radiator hoses, coolant hoses, vacuum hoses, or intake hoses. These hose clamps are the same style as your OEM hoses with a smooth inside band to prevent cutting into the hose material.

    Features:
  • 9mm band width
  • 6mm hex & slotted head
  • Smooth inside of band = optimal hose protection
  • OEM
  • 430 Stainless steel band and housing with zinc plated steel screw
  • Asymmetric housing = even distribution of forces and prevents tilting of the clamp when tightening
  • Screw support = ease of assembly due to the safe guidance of the emerging band
  • Short housing saddle = even contact pressure = improved efficiency

    Part NumberDescriptionClamping Range in MMClamping Range in Inches
    008-12T8-12 HOSE CLAMP8mm-12mm5/16"-1/2"
    008-16T8-16 HOSE CLAMP8mm-16mm5/16"-5/8"
    012-20T12-20 HOSE CLAMP12mm-20mm1/2"-3/4"
    016-27T16-27 HOSE CLAMP16mm-27mm5/8"-11/16"
    020-32T20-32 HOSE CLAMP20mm-32mm3/4"-1 1/4"
    025-40T25-40 HOSE CLAMP25mm-40mm1"-1 5/8"
    030-45T30-45 HOSE CLAMP30mm-45mm1 3/16"-1 3/4"
    032-50T32-50 HOSE CLAMP32mm-50mm1 3/8"-2"
    040-60T40-60 HOSE CLAMP40mm-60mm1 5/8"-2 3/8"
    050-70T50-70 HOSE CLAMP50mm-70mm2"-2 3/4"
    060-80T60-80 HOSE CLAMP60mm-80mm2 3/8"-3 1/8"
    070-90T70-90 HOSE CLAMP70mm-90mm2 3/4"-3 1/2"
    080-100T80-100 HOSE CLAMP80mm-100mm3 1/8"-4"
    090-110T90-110 HOSE CLAMP90mm-110mm3 1/2"-4 3/8"
    110-130T110-130 HOSE CLAMP110mm-130mm4 3/8"-5 1/8"
  • Part #: Hose-Clamps
    Price: $1.38 (USD) 
    $2.19 (Sale - Save 37%)
    Free Shipping Free Shipping
    on orders $199 and up
    Part #: 019639SCH01A
    Price: $18.71 (USD) 
    $24.95 (Sale - Save 25%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Liqui-Moly Valve Clean - 150ml

    Carbon build-up occurs over time, reducing the amount of air flow through the intake and exhaust valves. This results in lost performance and reduced fuel efficiency.

    Ensure your valves are as clean as possible by simply adding this to the fuel tank or by adding this in through a vacuum line in the intake.

    Features:

    • Breaks down deposits on valves and in the combustion chamber
    • Removes and dissolves residues throughout the fuel system (when added to tank)
    • Protects against corrosion 
    • Environmentally friendly 
    • Prevents carburetor icing
    • Proven performance with turbochargers and safe for catalytic converters


    Liqui-Moly is a German chemical company that offers top of the line engine oils, additives, and car care products that are designed to extend the life of your engine and ensure the best lubrication and cleanliness off engine and transmission components possible. With more than 50 years of experience and reviews across the world from magazines and race teams, Liqui-Moly proves time and time again why they are one of the most innovative lead forces of performance automotive chemicals in the world.

    **Ground ship only in the Continental U.S.

    Part #: lm2001KT
    Price: $8.96 (USD) 
    $9.95 (Sale - Save 10%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Liqui-Moly Pro-Line Engine Flush - 500ml

    Looking to rid your engine of built up gunk and sludge? Liqui-Moly's Pro-Line Engine Flush is perfect for lifting away engine sludge, both oil-soluble and insoluble, from the surfaces of the block and interior components and oil passages, allowing oil to flow much more freely afterward, enabling the new oil to provide better protection and the engine to run smoother and easier. This is done by using a proprietary blend of detergents and dispersant additives that are harsh and fast acting on build-up but neutral to seals, gaskets, and other internal engine materials. This provides a gentle but rapid cleaning process that eliminate contaminants, restoring power and engine efficiency.

    Properties:

    • Gentle and rapid cleaning
    • Neutral to seals and other materials installed in the engine
    • Compatible with catalytic converters
    • Highly economical
    • No additional environmental pollution
    • Simple to use

    Benefits:

    • Removes deposits & residues
    • Dissolves sludge & lacquer and isolates solid particles & liquid contaminants
    • Improves the combustion process and restores full engine performance
    • Prevents corrosion of unprotected metal surfaces
    • Recovers oil lubricating properties
    • Suitable for all gasoline and diesel engines.

    Instructions:

    Add to engine oil before engine oil change. Let engine run on idle speed for 10 minutes. Drain oil, change oil filter and re-fill with fresh high quality oil. Contents sufficient for 5 liter engine oil capacity. Fully compatible with all commercially available engine oils.

    Liqui-Moly is a German chemical company that offers top of the line engine oils, additives, and car care products that are designed to extend the life of your engine and ensure the best lubrication and cleanliness off engine and transmission components possible. With more than 50 years of experience and reviews across the world from magazines and race teams, Liqui-Moly proves time and time again why they are one of the most innovative lead forces of performance automotive chemicals in the world.

    Part #: lm2037KT
    Price: $11.69 (USD) 
    $12.99 (Sale - Save 10%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben 1/2

    Looking to update your old torque wrenches? The Schwaben 3/8" Drive Digital Torque Wrench is your answer. 

    This digital torque wrench uses an easy-to-read display to show torque amounts and settings, features a push button release, reversible 3/8" drive, 45 tooth ratchet head, and a comfortable no-slip grip and adjustment wheel.

    Specifications:

    • Setting Range: 45-220 ft lbs (60-300 Nm)
    • Display Units: ft-lbs, N-m, Inch-lbs, cm-kg2, and m-kg
    • Size: 22" (550mm) length for easy leverage
    • Accuracy: +- 3%
    • Include blow molded holding case
    • Requires one 3V CR2030 battery (included)
    Part #: 023380SCH01A
    Price: $97.46 (USD) 
    $129.95 (Sale - Save 25%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Honest Wash Tire Love - Long Lasting Tire Shine 1 Gallon

    If you are looking for a long lasting, high quality shine, Honest Wash has you covered with their Tire Love tire shine. Applied easy by spraying directly onto your tire or via an applicator, it dries in minutes and lasts days or even weeks, resisting rain and puddles from washing it away. This shine not only improves looks but also prevents tire cracks and flaking by protecting the tire from UV rays and road debris.

    Product Highlights

    • Shine, protect, and restore tires 
    • Protects tires from cracking and flaking 
    • Spray or wipe directly onto tires
    • No "sling" formula drys fast and won't end up on your paint
    Part #: HW07-1G
    Price: $62.99 (USD) 
    $69.99 (Sale - Save 10%)
    Quantity:   
    Pressure Washer Foam Cannon Starter Kit

    If you are looking for the perfect pressure washer, Honest Wash has the answer. The Foam cannon is exactly what you need to blast off dirt and get your car spotless once again. Just fill the container with the included Fat Foamer car wash and shower your car in a bath of high pressure suds to eliminate dirt, grease, and grime with ease.

    Includes a pressure washer adapter and can be used with any pressure wash with a flow rate of 1.5 to 5.3 GPM

    Kit includes:

    • Foam Cannon pressure washer attachment
    • Fat Foamer car wash
    Part #: HWKT-7
    Price: $49.49 (USD) 
    $54.99 (Sale - Save 10%)
    Quantity:   
    Fat Foamer Foam Cannon Car Wash Soap 32oz The perfect ammo for your foam cannon, sprayer, wand, or lance, Honest wash has made a specially designed soap to be used in spray-on applications that gives you a thick foam with suds that lift away dirt and grime. Tested safe with all paint and PlastiDip. Made in the USA.
    Part #: HW08
    Price: $16.19 (USD) 
    $17.99 (Sale - Save 10%)
    Quantity:   
    Honest Wash Clay Bar Kit

    Honest Wash has an improved alternative to the typical clay bar with their Clay Bar Mitt and the Clay Bar Kit. Including the Car show Prep quick detailer for a lubricant, this kit uses the larger "clay" pad to remove surface imperfections and contaminants quicker and more efficiently than standard clay bar treatments. IN a few minutes your paint will look and feel like new.

    Kit includes:

    • Clay Bar Mitt
    • 32oz Bottle of Car Show Prep
    • 3 microfiber cloths
    Part #: HWKT-21
    Price: $40.49 (USD) 
    $44.99 (Sale - Save 10%)
    Quantity:   
    Honest Wash Glass Perfect - Streak-Free Glass Cleaner 2oz Sample Glass Perfect is the best cleaning choice to cover a range of surfaces including: tinted windows, windshields, side windows, mirrors, rear view mirrors, rear windows, headlights, chrome trim and grills, mag wheels, and interior panels including radio screens glass and instrument clusters. It cleans without leaving behind any streaks and completely ammonia free! Safe for PlatiDip and AutoFlex!
    Part #: HW04-S
    Price: $2.69 (USD) 
    $2.99 (Sale - Save 10%)
    Quantity:   
    Honest Wash Brake Dust Professional Wheel Cleaner -- 5 Gallon Tired of scrubbing every inch of your wheels to get rid of brake dust? Honest Wash's Brake Dust Professional wheel cleaner can be sprayed on and, after just a few minutes, be sprayed off to reveal a clean, bright wheel. No scrubbing needed. Tough enough to remove brake dust while gentle enough to keep from hurting wheels that are painted, powder coated, anodized, machined, and dipped. Safe for alloy rims.
    Part #: HW11-5G
    Price: $251.99 (USD) 
    $279.99 (Sale - Save 10%)
    Quantity:   
    Honest Wash Cross Dressing - Rubber, Plastic, & Vinyl - Cleaner & Conditioner 5 Gallon Take care of your interior and exterior plastic, rubber, and vinyl panels with Cross Dressing by Honest Wash, a multipurpose dressing that cleans, conditions, and gives your parts a glossy finish without leaving behind an oily residue. This helps prevent premature fading and aging on surfaces that have been neglected, making them look like new again.
    Part #: HW30-5G
    Price: $251.99 (USD) 
    $279.99 (Sale - Save 10%)
    Quantity:   
    Honest Wash HyperMint Wash - Car Wash Soap 1 Gallon Honest Wash's HyperMint was is a concentrated soap that give off a fresh peppermint scent while efficiently lifting away dirt, grease, and grime from your vehicles paint. Made from a combination of synthetic detergents and emulsifiers, it is tough on dirt without being tough on any exterior surfaces or trim. It's high foaming formula is environmentally safe and requires only small amount of soap per wash, using on 2-8oz of soap per gallon of water.
    Part #: HW01-1G
    Price: $17.99 (USD) 
    $19.99 (Sale - Save 10%)
    Quantity:   
    Honest Wash Fat Foamer Foam Cannon Car Wash Soap 5 Gallon The perfect ammo for your foam cannon, sprayer, wand, or lance, Honest wash has made a specially designed soap to be used in spray-on applications that gives you a thick foam with suds that lift away dirt and grime. Tested safe with all paint and PlastiDip. Made in the USA.
    Part #: HW08-5G
    Price: $94.49 (USD) 
    $104.99 (Sale - Save 10%)
    Quantity:   
    Honest Wash Active Wax - Spray Wax 32oz

    Honest Wash's Active Wax is the best option for maintaining your vehicles feel and appearance in between car washes and wax applications. With a cherry scent in helps your car retain its shine and feel, while helping to protect from paint contaminants. Best used after car washes or before car shows to keep your car looking as good as possible.

    Product details:

    • Provides a fresh shine and feel
    • Use in between waxing  
    • Easy to use, spray on and wipe away  
    • Lustrous cherry scent  
    Part #: HW02
    Price: $17.99 (USD) 
    $19.99 (Sale - Save 10%)
    Quantity:   
    Honest Wash 3.5 Gallon Bucket Save water and soap with a 3.5 gallon bucket. It is deep enough to let you get your mitt wet without soaking your arm. Its plastic construction is crack resistant so that moving the bucket around on your hard concrete floor wont cause any leaks.
    Part #: HW-3.5B
    Price: $8.99 (USD) 
    $9.99 (Sale - Save 10%)
    Quantity:   
    Honest Wash Brake Dust Professional Wheel Cleaner -- 1 Gallon Tired of scrubbing every inch of your wheels to get rid of brake dust? Honest Wash's Brake Dust Professional wheel cleaner can be sprayed on and, after just a few minutes, be sprayed off to reveal a clean, bright wheel. No scrubbing needed. Tough enough to remove brake dust while gentle enough to keep from hurting wheels that are painted, powder coated, anodized, machined, and dipped. Safe for alloy rims.
    Part #: HW11-1G
    Price: $62.99 (USD) 
    $69.99 (Sale - Save 10%)
    Quantity:   
    Honest Wash Bug Delete Bug, Tar, & Tree Sap Remover -- 5 Gallon Easily remove the build up of dead bugs, tar, film, and tree sap from the front of your car in minutes with Honest Wash's Bug Delete. Bug Delete is strong enough to wash away the layers of contaminants without damaging any of the exterior surfaces of your vehicle. Its ingredients are non-caustic, non-corrosive, and has no harsh alkalies.
    Part #: HW05-5G
    Price: $197.99 (USD) 
    $219.99 (Sale - Save 10%)
    Quantity:   
    Schwaben Snap-in Grease Gun Nozzle Tip For Flush-Style Fitting - 5-1/4 The needle nozzle grease gun fitting is a perfect fit when it comes to servicing our line of monoballs. We decided to use this less common fitting style due to it low profile design, keeping the product serviceable without having too much in the way.
    Part #: 2906K92SCH
    Price: $22.46 (USD) 
    $29.95 (Sale - Save 25%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Limited Edition #97 Turner Motorsport M6 GT3 Minichamps - 1 Of 204

    Turner Motorsport was created with the vision of bringing ultra high performance BMW accessories to avid enthusiasts at a reasonable price. Will Turner opened the doors to his 6500 square foot R&D facility in 1993 - since then the company has seen incredible growth and accomplishment. Most recently, Turner Motorsport participated in the IMSA United Sportscar Championship. Celebrate Turner's continuing legacy of success on the track by proudly displaying our 1:43 scale model of the #97 car on your desk, or on your workbench.

        While not on the racetrack, the team at Turner can be found designing and testing new products perform just as well on the track as they do on the street. For example, Turner’s E46 rear subframe reinforcement kit resolves a real world problem, the E46’s rear subframe mounting points, by creating a solution that prevents further damage and can be used to remedy and already cracked subframe area. In this way, an extremely detrimental problem can be repaired or prevented no matter what type of driving style the vehicle endures. This is just one example of the philosophy behind Turner Motorsport being put to work in every product they design.

        When it comes to sourcing elusive motorsport specific parts, Turner delivers again. As an authorized dealer, Turner carries a wide range of racing specific parts from BMW Motorsport. Anything from full conversions, such as the M235iR conversion kit, to the more esoteric offerings like the E30 M3 Evo racing pulley kit.

        Now you can bring home a piece of Turner Motorsport History with this beautifully constructed diecast model of the Turner M6 GTD car. This is the same one driven by Jens Klingman and Bret Curtis at Circuit of the Americas in the 2016 season. Accurate and breathtaking detail are at the forefront of this limited edition 1/43 scale model. Only 204 are left so get yours before the checkered flag drops!

    Part #: 97M6GTSMINICHAMP
    Price: $72.21 (USD) 
    $84.95 (Sale - Save 15%)
    Free Shipping Free Shipping
    Quantity:   
    Complete Turner Baffled Oil Catch Can Kit - Reverse Flow 10oz

    When we designed this catch we wanted to have the most function options available, the best separation method, and the easiest to service. The Turner engineered catch cans offer a pre-setup design based ion desired flow direction, however this does not limit you to this flow. The inner baffle orientation can be easily adjusted to flow in both directions in case you decide to move this catch can to a different vehicle. A 4 chamber system  baffle system inside the catch can was engineered to create multiple changes in the direction of airflow within the separator to cause oil droplets to fall out of suspension before exiting the catch can. Having a closed / recirculated design reduces oil ingestion and promotes cleaner emissions and odor-less operation.

    Our catch can was also designed with the idea that the cans fill level can easily be checked with a top mounted dipstick and an optional use bottom drain hole. The drain system comes complete with a valve and hose to be mounted at a lower area of the vehicle so when you're doing an oil change you can drain the catch can.

    Features:

    • 6061-T6 billet machined body, anodized black for lasting protection and appearance
    • Strategically positioned 4 chamber baffle system maximizes oil / air separation 
    • Knurled and black anodized oil dipstick makes inspecting oil volume of reservoir clean and simple
    • Sealed with a pre-installed viton O-Ring
    • Includes 2.5mm allen key to remove baffle plates for cleaning
    • Engineered to create multiple changes in the direction of airflow within the separator to cause oil droplets to fall out of suspension before exiting the catch can
    • Closed / recirculated design reduces oil ingestion and promotes cleaner emissions and odor-less operation
    • Optional use drain hole - drain kit included!
    • Universal mounting kit
    Part #: 022798tms01-10KT
    Price: $161.46 (USD) 
    $189.95 (Sale - Save 15%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben Adjustable Pry Bar

    Having a pry bar that is better formed for automotive applications and adjustability could come to be one of the best tools in your collection. We've all run into those stubborn parts that refuse to be moved, it's time to put some force into it.

    Features:

    • One size fits many 
    • Extends from 18 to 30 inches and locks in place with a push button collar
    • A release button at the pry bar head allows it to rotate through a wide arc and lock in place again when the button is released.
    • Made of hardened alloy steel.
    Part #: PB-450E
    Price: $29.96 (USD) 
    $39.95 (Sale - Save 25%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben Caliper Piston Compressor Tool

    A simple design that makes compressing the caliper piston back in a breeze. The days of balancing the piston while turning a C-clamp are over.

    Note: Not designed for use with screw-in type brake pistons.

    Part #: scwbk-510
    Price: $7.46 (USD) 
    $9.95 (Sale - Save 25%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben Hex Head Socket Kit - 9 Pieces

    A perfect collection of hex head sockets compiled in a case that's always ready to go.

    Features:

    • High strength hex driver set, in 3/8 and 1/2-inch drive, is rugged enough for professional use and includes 4, 4.5, 5.5, 6, 8, 12, 14, and 17mm sizes
    • Conveniently housed in a sturdy blow molded case for portability and easy organization.

     

    Part #: HBS-M9PCSh
    Price: $18.71 (USD) 
    $24.95 (Sale - Save 25%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben Oil Storage Catch Can - 10-Liter

    Large capacity oil drain catch can lets you perform a mess-free oil change and dispose of your drain oil responsibly.

    Features:

    • Made from rugged ABS
    • 10 liter capacity (large enough to hold two oil changes from most passenger cars and light trucks)
    • Large double handles and drain spout with screw cap
    • Fill and vent plugs have o-ring seals to prevent leakage

     

    Part #: poc-10
    Price: $14.96 (USD) 
    $19.95 (Sale - Save 25%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben 11mm Brake Bleeder Wrench Finally, a bleeder wrench with just the right angle to open the bleeder screw without having to spend all that time removing each wheel from your car.
    Part #: 000550SCH01A
    Price: $14.96 (USD) 
    $19.95 (Sale - Save 25%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben Strut Nut Socket - 19mm To secure shocks and struts to their mounts, the retaining nut must be torqued to its proper specification using a torque wrench. An improper torque value may result in premature mount failure - or worse. Strut nut sockets allow for the use of an allen wrench to hold the damper shaft while utilizing your 1/2" drive torque wrench on the socket to achieve proper torque.
    Part #: 003046SCH01A-02
    Price: $11.21 (USD) 
    $14.95 (Sale - Save 25%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    aFe ProDry S Air Filter - E30 M3, 84-85 318i, 84-85 325e, 84-85 528e, All E12, E23, E24 (no M), E28 535i/is This is a drop-in stock replacement aFe performance air filter that installs into your BMW's factory airbox. This particular filter fits the following BMWs:

    E30 3 series : 318i 325e 1984-1985
    E30 3 series : M3 1987-1991
    E28 5 series : 528e 1984-1985
    E28 5 series : 533i 535i 535is 1983-1988
    E21 3 series : 320i 1977-1983
    E12 5 series : 528i 530i 1977-1981
    E24 6 series : 633csi 635csi 1979-1989

    This version has an oil-free filter media for less maintenance. For the best flowing filter, with the best performance gain, we always recommend the standard aFe "Pro5R " filter (which has a blue pre-oiled filter media), but this oil-free filter flows only slightly less than the blue Pro5R style aFe filter, and requires no re-oiling after cleaning the filter.
    Part #: 31-10048
    Price: $68.40 (USD) 
    $76.00 (Sale - Save 10%)
    Free Shipping Free Shipping
    Quantity:   
    Schwaben 40

    Ideal for smaller sports cars with short noses.  Great for quick oil changes and underbody maintenance.

    Please take measurement below before ordering.

     

    Features:

    • Lightweight at only 4 lbs each and Withe handy carrying straps
    •  Will not slip, slide or scoot on any surface and never scratches or marks your floor
    •  100% solid core construction for additional strength
    •  40 " long, 8" wide, 7" lift height, at 15 lbs each and a low 10.8 degree incline
    • Great for quick oil changes and underbody maintenance.

       

       

     

    Part #: 006140SCH01A
    Price: $108.00 (USD) 
    $144.00 (Sale - Save 25%)
    Quantity:   
    Schwaben Black Mechanics Work Gloves - XXL

    Perfect for any job when it comes to keeping your hands clean and protected.

    Features:

    • High dexterity
    • Elastic hook and loop strap
    • Textured latex finger tips for grip
    • Breathable material
    Part #: 010337SCH04A
    Price: $7.46 (USD) 
    $9.95 (Sale - Save 25%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben Fender Lip Forming Pliers

    Often times when it comes to adding spacers or a more aggressive wheel fitment clearance can become an issue.

    This hand tool gently flattens the lip inside of your fender to increase clearance for lowered vehicles or vehicles with wider offsets than factory. No need to remove the wheel. Use of a heat gun is required during forming to prevent wrinkles and cracked paint. Includes two spare small pads.

    Part #: 012896SCH01A
    Price: $34.46 (USD) 
    $45.95 (Sale - Save 25%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Wheel Hanger - M12x1.5 Thread

    Our aluminum wheel hanger makes it easy to remove and install wheels. Just thread the hanger stud into a wheel bolt hole and hang the wheel safely while you rotate tires or remove them for service or vehicle repair. (It's also great for keeping wheel bolt holes aligned on cars with spacers.)

    Features:

    • Longer & Lighter
    • Made of 6061-T6 aluminum
    • Anodized for hardness and good looks
    • Knurled, non-slip handle has a drilled hole so you can hang it on a pegboard hook in your garage

     

    Better still, order two: one for your garage and another for the emergency tool kit in you trunk.

    Part #: 003335SCH01A
    Price: $11.21 (USD) 
    $14.95 (Sale - Save 25%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Wheel Bolt Pattern Gauge

    This Schwaben tool easily and quickly measures wheel bolt circle on multible lug patterns. Including 3-4-5 and 6 lug patterns. Construction is a quality all aluminum billet tool made to last a lifetime.

    • X3 = 3 lug wheel sizes on one side of pattern tool. Containes 10 different bolt patterns. 
    • X4 = 4 lug wheel sizes on one side of the pattern tool. Contains 10 different bolt patterns.
    • X5 = 5 lug wheel sizes and shows on two sides of the pattern tool. Contains 12 different  bolt patterns.
    • X6 = 6 lug wheel sizes and shows on one side of pattern tool. Contains 5 different  bolt patterns.

    NOTE: Loosen sliding arm, insert into wheel or center on studs. Tighten thumb screw gently. Measure bolt pattern on inside of arm.

    NOTE: 5 lug patterns has measurement on two different sides of the tool. if it does not line up to a mark look on opposite side for more 5 lug sizes.

     

    Part #: 009619SCH01A
    Price: $18.71 (USD) 
    $24.95 (Sale - Save 25%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben Padded Creeper Seat With Tool Tray

    This rolling creeper seat is the  ideal height for many jobs. If you are working on the lower half of your car, this seat is a must have. Brakes, wheels, waxing, washing and more. 

     Features:

    • 2-1/2" thick padded leatherette seat.
    • 14" high. x 14" wide x 20" long.
    • 1" steel tube frame.
    • Divided tool tray below seat.
    • Four 2" wheels.
    • 2-1/2" ground clearance.
    • Ball bearing swivels on all wheels.
    • 250 lb capacity.
    Part #: 005940SCH01A
    Price: $27.71 (USD) 
    $36.95 (Sale - Save 25%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben 60 LED Reel Drop Light

     The 15" long head features 60 super bright LED's. 51  LED's light up the wide side view and 9 LED's on the end for  more of a flashlight mode. Featuring a drop-down design to keep the light handy when you need it, but out of the way when you don't. 

    Features:

    • 120 Lumens 
    • 30 ft. Cord
    • Fully adjustable position stop
    • Hooked end 

     

    Part #: 010641SCH01A
    Price: $49.46 (USD) 
    $65.95 (Sale - Save 25%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben 26 Pc 1/4

    It's always nice having a compact tool kit to carry with you in case of an emergency.

     

    Features:

    • Shallow 6 point sockets 4 - 14mm.
    • Deep 6 point sockets 4 -13mm.
    • Fine tooth 1/4" drive ratchet with push button socket release.
    • 1/4" drive Extensions, 1.5" and 6".
    • 1/4" flex Joint.
    • 1/4" driver.
    • Black blow molded case for portability and security.

     

    Part #: 011927SCH01A
    Price: $29.96 (USD) 
    $39.95 (Sale - Save 25%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben Wheel Mount Kit For Magnetic Caster/Camber Gauge

    The mounting kits provides a safe surface for magnetic caster/camber gauges to prevent wheel damage.

    Features:

    • High quality CNC machined billet aluminum..
    • Fully adjustable from 15" to 22" wheels.  

     

    *Schwaben professional Magnetic Camber Gauge and Magnetic Camber/Caster Gauge

    Part #: 010891SCH01A
    Price: $119.96 (USD) 
    $159.95 (Sale - Save 25%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben 3-Liter Multi-functional Fluid Pump Kit

    We know bleeding brake alone is not only no fun, but much more complicated than it needs to be. Having a pressure bleeder give you the ability to keep pressure on the brake system while you go under and crack open the bleeder screws to relieve the air pockets.

    Features:

    • Includes 8 special adapters for most transmissions and other fluid filling needs. Adapters all feature quick disconnect with supplied fluid hose. 
    • Comes with popular European M45 screw on master cylinder cap adapter and a universal brake bleeding cap for most other systems.
    • ​This is the most complete kit around for the price and it carries a one-year warranty.
    • Holds a full 3-Liters ( 3.17 qts) of brake fluid
    • Easy to read 0-30 lbs pressure gauge built into the tank top
    • Pressure relief valve for safe release of pressure
    • 40" hose with detachable swivel fitting
    • Do not  exceed 20 PSI

    Note: When using for multiple fluids, you must flush tank, hose and pump between use.

    Part #: 007311SCH01A
    Price: $59.96 (USD) 
    $79.95 (Sale - Save 25%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben Wire Crimper/Stripper Pliers

    All the features you could ask for from electrical pliers.

    Features:

    • Crimp & Strip 10 to 22 gauge
    • Wire & Bolt cutter
    Part #: 010840SCH01A
    Price: $9.71 (USD) 
    $12.95 (Sale - Save 25%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Extra-Large Turner Motorsport Toolbox Sticker (5x8

    THE IDEAL TOOLBOX STICKER!

    Cast some positive Turner vibes on your track build with this extra-large vinyl TURNER MOTORSPORT sticker. About as long as an arm, this is a great statement piece anywhere around the shop. 

    While supplies last. Limit one per customer, please!

    Part #: 148-410
    Price: $8.95 (USD) 
    $19.95 (Sale - Save 55%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Stainless Brake Rotor Set Screw (34111123072) - Set Of 4

    This is a set of stainless steel brake rotor retaining screws to replace the factory steel screws. As everyone knows, the stock screws will seize in the holes over time. And the shallow recess on the head means the screw is easily stripped. These replacement rotor screws are stainless steel and won't corrode and seize in place.

    This is a set of 4 stainless screws. Most BMW rotors take one screw but some M cars after 2001 will take two screws per rotor.

    Part #: 001359ecs01ax4KT
    Price: $8.47 (USD) 
    $9.96 (Sale - Save 15%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben 68 piece Zippered Tool Bag Kit

    Perfect for having some tools on the go.

    Use it in your garage or take it on a trip. Contains our most popular hand tools for your European vehicle.

    Features:

    • Metric 3/8" Drive Socket Set
    • 3/8" Drive Ratchet
    • 4 pc Plier Set
    • 4 pc 3/8" Extension Set
    • 46 pc 1/4" Drive Set
    • Tool Bag

       

    Part #: 014121sch01aKT
    Price: $159.52 (USD) 
    $212.70 (Sale - Save 25%)
    Free Shipping Free Shipping
    Quantity:   
    Replacement StopTech 380x32mm Rotors for Big Brake Kits - Left & Right Pair Replacement StopTech AeroRotor for big brake kits - 380mm diameter, 32mm thickness. Choose from either slotted or cross-drilled and standard finish or corrosion-resistant zinc coating. Comes with new mounting hardware to re-use the original StopTech mounting hat. This is for a Left and Right Pair.

    Size: 380x32mm
    Type: Gas-Slotted or Cross-Drilled
    Finish: standard finish (no coating), or zinc coating
    Fitment: Left and Right Pair
    Applications: Fits any StopTech Big Brake Kit that uses the 380x32mm disc (standard annulus)
    Part #: ST0PTECH380X32
    Price: $647.91 (USD) 
    $719.9 (Sale - Save 10%)
    Free Shipping Free Shipping
    on orders $199 and up
    MSI 12x1.5 Bullet Nose Racing Wheel Studs with Dry Lube - Most BMWs 1984-2011 (E30, E36, E46, E9X)
    • 75MM, 85MM, or 95MM LENGTHS
    • Dry film lubricant HM-30 coating containing Teflon & Moly over a manganese phosphate finish
    • Innovative nut-starter and bullet shape radius that all but eliminates cross-threading
    • Properly sized shank to work with a wide range of brake rotor, wheel, and nut combinations
    • Heat-treated aircraft quality alloy steel
    • Developed from over 20 years of top level NASCAR use
    • These studs are installed using the traditional 'double-nut' method (one regular nut and one jam nut) with thread locking compound (red Turbo-Lock or similar).

    Wheel studs are among the safest and most beneficial upgrades you can make on a track car. Not only are wheel studs safer than wheel bolts but they make changing wheels/tires much easier. One of the frustrating things about installing your wheels on the hub is that it's difficult to line up the wheel on the bolt holes. As wheels get larger but also heavier it's even more trouble. Add in a wheel spacer and the task is twice as hard. BMW does produce a wheel alignment pin for this purpose but if you're changing wheels often a stud conversion is the better way to go.

    MSI Racing specializes in hardware for motorsports and other advanced industries and their wheel studs are some of the very best in the professional motorsports world. MSI is already a major supplier to teams in the top NASCAR categories and we tried them on our Grand-Am/IMSA racecars and were very impressed by the performance and durability of their designs. After testing them over the course of a few endurance seasons we decided to offer them to all of our customers as well. These studs are available in multiple lengthsand all sizes are made with aircraft quality material and have roll formed threads. The coating is a dry film lubricant HM-30 coating containing Teflon & Moly over a manganese phosphate finish. This coating process reduces friction and wear to prevent thread galling. Another benefit is that these have the best corrosion resistance we have seen in any wheel stud! A dry lube stud has the most corrosion resistance than a plain black coating because the lube is applied over the black phosphate coating. Salt tests have shown this stud is superior to others in corrosion resistance. Other features of our MSI studs include a large bullet nose nut-starter and a properly sized shank to work with a wider range of BMW wheel, nut, and brake rotor combinations.

    These studs are the perfect choice for endurance racers, sprint racers, track-only cars, or even hardcore street cars. The bullet nose on this stud is deeper than other studs we have used. More of the stud protrudes through the open nut so that everything lines up better on the threads. This helps to eliminate the possibility of cross-threading or thread stripping. In addition, the shank has been machined for proper brake rotor alignment. The dry lube helps the nut engage and glide over the threads for faster pit stops without cross threading or binding.

    Not all wheel studs are created equal. We don't take a manufacturer's generic wheel stud from their catalog and call it our own. Turner Wheel Studs are designed to our own specifications and manufactured for us exclusively. Beware of cheaper studs on the market! We have seen other studs similar to our own designs that are not a true BMW fitment. There are differences that we have ironed out over our years of selling wheel studs for the BMW market. Our stud prices may be slightly higher than the rock bottom prices on the web but we promise that it's a higher quality.

    Sold per stud.
    Wheel nuts sold separately.

    Part #: MSI-M12X15
    Price: $9.31 (USD) 
    $10.95 (Sale - Save 15%)
    Free Shipping Free Shipping
    on orders $199 and up
    Turner Motorsport Windshield Banner Show your support for Turner Motorsport by placing this banner at the top of your windshield. This 8" x 60" banner fits all BMW's (some trimming is required). Great for racecars, track cars, or your high performance street car. Due to the wide variety of cars and sizes of windshields banners do require some trimming to fit correctly. Banners are shipped as a 8" x 60" sheet.

    Turner Motorsport vinyl graphics are made from high performance cast graphic film, which has superior resistance to sunlight and adhesive longevity. The Turner Motorsport Logo is printed in super high quality vinyl inks giving the banner a professional look. We currently offer the Turner Motorsport logo in either white or silver, with gloss black trim on a matte black background. Just like the ones on our Turner Motorsport Project Cars!

    Think Turner Motorsport should sponsor your car?
    Send us some pictures and a short description of why you think your car (race car, track car, or street car) needs one of these banners for FREE and we will send you one at no charge. Send your pictures and info to jbaier@turnermotorsport.com and tell us why your car should have a Turner banner! Requests must be sent by email in writing. Please do not request over the phone.
    Part #: TMS11530
    Price: $16.96 (USD) 
    $19.95 (Sale - Save 15%)
    Free Shipping Free Shipping
    on orders $199 and up
    Replacement StopTech 380x35mm Rotors for Big Brake Kits - Left & Right Pair Replacement StopTech AeroRotor for big brake kits - 380mm diameter, 35mm thickness. Choose from either slotted or cross-drilled and with a standard finish or corrosion-resistant zinc coating. Comes with new mounting hardware to re-use the original StopTech mounting hat. This is for a Left and Right Pair.

    Size: 380x35mm
    Type: Gas-Slotted or Cross-Drilled
    Finish: standard finish (no coating), or zinc coating
    Fitment: Left and Right Pair
    Applications: Fits any StopTech Big Brake Kit that uses the 380x35mm disc.
    Part #: ST0PTECH380X35
    Price: $667.71 (USD) 
    $741.9 (Sale - Save 10%)
    Free Shipping Free Shipping
    on orders $199 and up
    Turner Motorsport - Future Race Car Driver Child's - T-Shirt Every kid dreams of being a be race car driver. These bright yellow children's tshirts show off your/their enthusiasm for racing and support for the Turner Motorsport Grand-Am and Rolex teams. Available in either Toddler sizes (2T,3T, or 4T) or Youth sizes (XS, S, M, or L). 100% cotton.
    Part #: FUTURE-DRIVER
    Price: $8.75 (USD) 
    $14.95 (Sale - Save 41%)
    Free Shipping Free Shipping
    on orders $199 and up
    Wheel Bolt Set - 12x1.50 - Black - For Most 1975-2012 BMW, MINI

    Whether you are looking to replace your old stock wheel lug bolts, or need longer bolts to accommodate wheel spacers or for other special considerations, our black wheel bolts are probably what you need. They are high grade (10.9) and feature a durable black finish. These are 12 x 1.5mm bolts with a 17mm head -- as used on most BMWs. Replaces BMW part numbers 36136781150 and 36131095390.

    The standard length wheel bolts are for stock BMWs, and the longer length bolts are listed below (select your length with the drop down box) with the size / thickness wheel spacers they are suitable for. Longer wheel bolts are only 20 cents more than standard, and are available in lengths to work with spacers up to 20mm thick. Please select your desired length below (default is the standard/stock BMW length bolt).

    Price is for a set of 10 bolts.

    These black wheel bolts fit the following BMWs:
    2008-2012 E82 BMW 128i 135i 1M Coupe
    1977-1983 E21 BMW 320i 320/5 323i
    1984-1991 E30 BMW 318i 318is 318ic 325e 325es 325i 325ic 325is 325ix M3
    1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
    1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
    2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
    2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
    2007-2013 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
    2007-2013 E93 BMW 328i 335i M3 - Convertible
    1982-1988 E28 BMW 524td 528e 533i 535i 535is M5
    1989-1995 E34 BMW 525i 530i 535i 540i M5
    1997-2003 E39 BMW 525i 528i 530i 540i M5
    2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i M5
    1982-1989 E24 BMW 633csi 635csi L6 M6
    2004-2011 E63 E64 BMW 645ci 650i M6
    1977-1987 E23 BMW 728i 733i 735i 745i L7
    1988-1994 E32 BMW 735i 735il 740i 740il 750il
    1995-2001 E38 BMW 740i 740il 750il
    1990-1999 E31 BMW 840i 840ci 850i 850ci 850csi
    1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
    2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
    2009-2015 E89 BMW Z4 sDrive28i sDrive30i sDrive35i sDrive35is
    2000-2003 E52 BMW Z8 Roadster
    2002-6/2006 R50 MINI MINI Cooper
    2005-6/2006 R52 MINI MINI Cooper Convertible, MINI Cooper S Convertible.
    2002-6/2006 R53 MINI MINI Cooper S

    Part #: TMS1237
    Price: $23.38 (USD) 
    $27.5 (Sale - Save 15%)
    Free Shipping Free Shipping
    on orders $199 and up
    Turner Motorsport Racing Aluminum Pedal Set for Manual Transmission

    These aluminum pedals were designed with one thing in mind -- performance. We wanted a pedal set that gave us the grip EXACTLY where we wanted it: MASSIVE GRIP on the brake and clutch pedals, and far less grip on the accelerator to allow the right foot to better slide/move during heal-toe braking. This set surpasses all others in this area, giving your BMW's foot operated controls a more tactile feel and response. The brake and clutch pedals feature pyramid shaped spikes, which actually BITE the soles of your shoes PERFECTLY, creating the ultimate (and unbeatable) friction surface.

    These pedals are 100% MADE IN THE USA, and are CNC machined from aircraft quality aluminum billet to perfectly fit your BMW. There's no rubber to wear out, and no cosmetic finishes to chip or flake off. Stainless steel hardware is included, as well as a basic installation guide (professional installation always recommended). These pedals are for left-hand drive (LHD), manual transmission BMWs only (including SMG and DCT sequential manual gearboxes -- on these cars, you will only use one of the included clutch/brake sized pedals).

    Now available in (optional) black anodized! The same shoe-gripping performance as our standard "naked" aluminum racing pedals, but with an added black anodized coating, for a stealth black finish. We always recommend the naked metal pedals for harsher/race type use, as all cosmetic finishes will eventually degrade over time. But for those looking for the black-out look, we can now accommodate! To add this option, simply choose your selection below.

     

    Part #: TMS339007
    Price: $93.46 (USD) 
    $109.95 (Sale - Save 15%)
    Free Shipping Free Shipping
    on orders $199 and up
    Wide Annulus StopTech 380x32mm Rotors for Big Brake Kits - Left & Right Pair Wide Annulus StopTech AeroRotor for big brake kits - 380mm diameter, 32mm thickness. These rotors are the wide annulus. There is more surface area to the rotor which helps in thermal capacity and more swept area for the pad. Note that you will need new brake rotor hats (smaller) and the new (larger) pads to work with these rotors. Choose from either slotted or cross-drilled. Comes with new race mounting hardware to re-use the original StopTech mounting hat. This is for a Left and Right Pair.

    Size: 380x32mm
    Type: Gas-Slotted or Cross-Drilled
    Fitment: Left and Right Pair
    Applications: Fits any StopTech Big Brake Kit that uses the 380x32mm disc (wide annulus)
    Part #: TMS338983
    Price: $647.91 (USD) 
    $719.9 (Sale - Save 10%)
    Free Shipping Free Shipping
    on orders $199 and up
    Turner BMW 10mm Wheel Spacers (Pair) - Most BMWs (see applications)

    10MM (.39 inch) Wheel Spacer for BMW E24, E28, E30 M3, E31, E32, E34, E36, E38, E46, E60, E63, E82, E83, E87, E90, E91, E92, E93 (E9X), Z3, Z4

    Wheel spacers are the ideal solution to resolve a number of fitment and aesthetic problems --

    • Correct wheel offset issues
    • Achieve a flush fitment instead of the "tucked under" look
    • Clearance the wheel from contact with other components (suspension, brakes, etc).
    • Improve handling and stability by increasing track width

    A spacer fits between the wheel and the hub assembly and pushes the wheel out by the thickness of the spacer. Our wheel spacers are compatible with almost any type of BMW wheel and are a direct fit to the wheel hub (see below for any fitment notes). Longer wheel bolts or wheel studs are required.

    These latest generation of the Turner Motorsport Wheel Spacers represent a total redesign of the wheel spacer concept - a ground-up, clean sheet design based on our years of BMW service and motorsports. We took everything we have learned from our service technicians, customers, and race team crew and built the spacer to beat all spacers. We've been in the BMW wheel spacer business probably longer than anybody and when it came time to make our own spacers, a basic spacer design just wouldn't do. We had to make a spacer that is light weight (for lower unsprung mass), has a tough and durable coating to last through our New England winters, is easily removed (your mechanic will thank you), and is precisely engineered and manufactured for a proper fit on the hub and in the wheel. You won't find a better engineered wheel spacer on the market!

    Turner Wheel Spacer Features --
    + hub-centric design, 1-piece spacer with hubcentric lip
    + precise tolerance fitment thanks to CAD process and CNC mill machine
    + aerospace grade aluminum  light weight but very strong with a high resistance to corrosion
    + additional military-spec hardcoat for further corrosion resistance
    + innovative Quick Release pockets for easy removal (better than a chamfered back edge)
    + laser engraved size and part number for easy identification
    + stealthy anthracite or black color
    + extended bolt sets in factory-matching black or bright silver finish available (wheel stud kits also available)
    + Turner Motorsport track and street tested!
    + Made in the USA

    10mm Fitment Note: You must be very careful when fitting 10mm spacers to any BMW. Since the depth of the hubcentric lip will vary, you risk bottoming out of the spacer before it sits flush with the hub. This will leave a gap between the spacer and the hub, seriously compromising the strength of the spacer. The lip on the car may need to be shaved down so the 10mm spacer will fit flush on the rotor hat.

    Extended Wheel Bolts
    Longer wheel bolts or wheel studs are required for all BMW wheel spacers. Spacers cannot be used with stock bolts. Our extended lug bolts are a very high quality and high grade steel lug bolt (grade 10.9). We offer two finishes to get you just the right look with your wheels - black zinc to maintain a factory BMW appearance or a bright zinc nickel finish to go with polished wheels. Zinc finishes are designed to withstand 700 hours of salt spray testing.

    Spacer Specs:
    (click to expand)
    Spacer Specs:
    bolt pattern:5 x 120
    center bore:72.6mm
    hubcentric?yes
    wheel pad size:normal

    Year & Model Applications
    (click to expand)
    2008-2012 E82 BMW 128i 135 1M
    1988-1991 E30 BMW M3
    1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
    1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
    2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
    2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
    2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
    2007-2012 E93 BMW 328i 335i M3 - Convertible
    1976-1981 E12 BMW 528i 530i
    1982-1988 E28 BMW 524td 528e 533i 535i 535is M5
    1989-1995 E34 BMW 525i 530i 535i 540i M5
    2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i M5
    1982-1989 E24 BMW 633csi 635csi M6
    2004-2010 E63 BMW 645ci 650i M6
    1981-1987 E23 BMW 733i 735i
    1988-1994 E32 BMW 735i 735il 740i 740il 750il
    1995-2001 E38 BMW 740i 740il 750il
    1990-1999 E31 BMW 840i 840ci 850i 850ci 850csi
    1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
    2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
    2009-2016 Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
    Part #: TWH9905010
    Price: $76.46 (USD) 
    $89.95 (Sale - Save 15%)
    Free Shipping Free Shipping
    on orders $199 and up
    Racing Hood Pin Kit This universal fit racing hood pin kit not only looks great but provides a safe way to secure your hood at the track. This kit contains everything you need, two clasps, threaded pins and a complete hardware kit (not shown.) A durable anodized finish is available in red or blue.
    Part #: HO0DPIN
    Price: $16.96 (USD) 
    $19.95 (Sale - Save 15%)
    Free Shipping Free Shipping
    on orders $199 and up
    Turner Motorsport - Rolex Side View - Child's T-Shirt These 100% cotton tshirts feature the Turner Motorsport BMW M3 as raced in the Rolex 24 at Daytona. Available in either Toddler sizes (2T,3T, or 4T) or Youth sizes (XS, S, M, or L).
    Part #: TMS5556
    Price: $8.75 (USD) 
    $9.95 (Sale - Save 12%)
    Free Shipping Free Shipping
    on orders $199 and up
    BMW Motorsport Seat Belt Shoulder Pad Set These original BMW Motorsport shoulder pads fit over any street car seat belt or 2" harness belt. A zippered side makes these super easy to install on any car. High quality "BMW MOTORSPORT" embroidery will set your car apart from the rest. Also available in 76mm (3") harness width. Set includes two shoulder pads.
    Part #: MSBELT50MM
    Price: $89.95 (USD) 
    $105.62 (Sale - Save 15%)
    Free Shipping Free Shipping
    on orders $199 and up
    Schwaben Pinch Weld Protector

    Many BMWs, especially older models, feature pinch welds where the floor pan meets the rocker. These run from wheel-well-to-wheel-well and are an especially appealing jacking location with one shortfall - jacking on an unprotected pinch weld will frequently cause an unsightly bent and damaged weld. This damage is a quick to rust spot, being located on the lowest point of the vehicle and no longer being covered by protective ecoat, paint, or undercoat.

    This Schwaben Pinch Weld Protector is designed to fit between any floor jack cradle and bottom of vehicle. It features a specially designed slot to straddle pinch welds, keeping jack from crushing or bending the pinch weld. The bottom side of protector is designed to fit any jack as well as the Schwaben (T#363164) aluminum jack stands. 

    Extruded and designed in USA. Pad is 3" wide & 1" tall.

    Part #: 019164SCH01A
    Price: $8.21 (USD) 
    $10.95 (Sale - Save 25%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Driveshaft - E12 528i/530i E24 630csi/633csi - Manual transmisson

    Got a vibration through the driveline on your BMW? Did you know that the u-joints are not replaceable on a factory driveshaft?Our remanufactured driveshafts allow for future replacement of u-joints and are rebuilt to a higher specification than the factory driveshaft.We start with OEM u-joints and then machine yokes onto the driveshaft to allow for future u-joint replacement.All bushings, universal joints, center bearings are replaced with new hardware (flex discs are not included but available separately).The whole unit is then dynamically balanced on a precision Axiline Balancer..

    Included in the price of the driveshaft is UPS return label, so you can return your core for refund quickly, easily and without additional expense.

    This item fits the following BMWs:
    1979-1980 E24 BMW 630csi/633csi  Manual transmission

    up to 09/1979 E12 BMW 528i 530i Manual transmission

    Includes $75.00 core charge to be refunded on return of your rebuildable core.

    Part #: 640X
    Price: $408.04 (USD) 
    $480.05 (Sale - Save 15%)
    Quantity:   
    aFe 75W-90 Differential Gear Oil aFe Power Pro Guard D2 is a full synthetic limited slip gear oil in 75-90 grade. This competition proven formulation utilizes a group IV synthetic base along with a proprietary additive package that reduces drag, resists foaming and maintains its viscosity under extreme heat and high loads. It utilizes next generation synthetic oil technology to provide consistent limited slip differential performance no matter what type of vehicle you drive. It is ideal for both clutch type and torsion type differentials, and outperforms conventional gear lubricants and delivers outstanding performance in all heavy duty applications from towing/hauling to extreme environments like desert trails, sand dunes and rock crawling.

    Exceeds API GL-5 specs. An alternative to the factory BMW SAF-XO diff fluid.
    Part #: 90-20001
    Price: $16.16 (USD) 
    $17.95 (Sale - Save 10%)
    Quantity:   
    aFe 75W-140 Differential Gear Oil aFe Power Pro Guard D2 is a full synthetic limited slip gear oil in 75-140 grade. This competition proven formulation utilizes a group IV synthetic base along with a proprietary additive package that reduces drag, resists foaming and maintains its viscosity under extreme heat and high loads. It utilizes next generation synthetic oil technology to provide consistent limited slip differential performance no matter what type of vehicle you drive. It is ideal for both clutch type and torsion type differentials, and outperforms conventional gear lubricants and delivers outstanding performance in all heavy duty applications from towing/hauling to extreme environments like desert trails, sand dunes and rock crawling.

    Exceeds API GL-5 specs. An alternative to the very expensive factory BMW SAF-XJ+FM diff fluid.
    Part #: 90-20101
    Price: $17.96 (USD) 
    $19.95 (Sale - Save 10%)
    Quantity:   
    Schwaben Micro Jump Start Kit

    Whether you're going for a long drive or spending the day out at the track, this micro power plant can be very convenient. When using your phone to capture memories of your favorite cars your battery can quickly drain, the Micro Jump Start is there for a recharge. Accidently leave a light on in your car? No need to worry about finding another car and booster cables, the Micro Jump Start is a one man jump team.

    One of the smallest & lightest portable power supply on the market. This power pack can charge or power most of your devices with a 4 to 1 USB cable adapter. This small lightweight jump box is perfect to keep in your glove box. 

    Features:

    • Fast Charging Lithium battery
    • Integrated LED  with 3 modes, flashlight, flashing warning light and flashing SOS
    • Includes wall outlet charger and 12 volt accessory outlet charger for you car. Charge time varies with current battery state of charge.
    • Nylon zippered pouch
    • 4 state of charge indicator lights
    • On/off switch with automatic power down
    • Includes Car Battery jump cables
    • 4 to 1 charging harness plugs into USB port on power pack and has 4 charge leads: Micro USB, Mini USB iPhone, 30-pin and iPhone Lighting Connector.
    • Size of power pack unit is only 115x75x15mm
    • Two output ports, 5V-3A and 12 volt Jump start port.
    • Input charging port 15V-1 A
    • Full Charging time 3 hrs.
    • Starting current 200A to peak current of 400A

    *If starter draw on vehicle is less then 200 AMP this should start your vehicle. 

    *Caution: Do not reverse polarity on jumper leads

    *Do not leave jumper box attached to car battery for more than 30 seconds after car has started. This will result in jumper box overheating.

     

    Part #: es2808520KT
    Price: $97.46 (USD) 
    $129.95 (Sale - Save 25%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben Tire Stack Cover

    This tire stack by Schwaben is the solution to keeping your tires and wheels clean while in storage.

    Features:

    • Works with 4 tire stacks and works great with our Schwaben Wheel Tree
    • Fitted with a long 29" zipper up the side for easy installation and removal
    • Nylon draw string at the bottom allows for a good snug fit
    • Durable 150D coated material is rated for outdoor use
    • Includes a handy storage pouch if not in use
    • Cover is a large 32" wide X 46" tall
    Part #: 016757SCH01A
    Price: $18.71 (USD) 
    $24.95 (Sale - Save 25%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    $100 Turner Motorsport Gift Package Special Gift Package! This BMW holiday gift package includes a $100 Turner Motorsport gift certificate (the perfect gift for any BMW enthusiast) and a Genuine BMW ceramic coffee mug. That's essentially a free authentic BMW coffee mug to give for that BMW lover on your shopping list. No matter what BMW your gift recipient owns, or what they need, you know they can choose exactly what they want from our THOUSANDS of BMW products, parts and BMW accessories. Offer valid while supplies last.

    Limit 1 Gift Package per customer.
    Part #: GC100
    Price: $100.00 (USD) 
    $118.95 (Sale - Save 16%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Tool - 21mm 3/8 Drive 6-point Socket 21mm hex socket with 3/8" drive.
    Part #: 02010021
    Price: $18.66 (USD) 
    $21.95 (Sale - Save 15%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Upper Spring Hats/Perches (Pair) - 60mm / 14mm Pin / Square Seat Made in the USA These aluminum upper spring hats are for coil over struts with a 60mm coil over spring. The specs are listed below; match the hat specs with your spring and strut. For a proper fitment you must confirm the spring hat matches the strut pin, especially on high-end motorsport struts.

    Spring I.D.Strut Pin Diam.Strut Pin Seat
    60mm14mmsquare

    Part #: TSU9980007
    Price: $50.96 (USD) 
    $59.95 (Sale - Save 15%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben Dipstick Oil Change Tube Set

    For use with the Schwaben Extractor/Filler System to extract used ATF fluid  or used engine oil out thru the dipstick tube. No need to crawl under the car with this handy set of tubes. 

    Features:

    • Includes 3 tubes
    • Main 41" tube couples directly into the main 6-Liter tank coupling
    • Two 35" tubes to be inserted into the dipstick tube and have a slide coupler to connect to main tube
    • One dipstick tube is 1/4" OD and the other is 3/16"

    *From top of dipstick tube to bottom of pan must be no more than 33" long. 

    Part #: 013810SCH01A
    Price: $11.96 (USD) 
    $15.95 (Sale - Save 25%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    E34 M5 JB Racing Lightweight Aluminum Flywheel Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

    Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. The weight difference between an aluminum and steel flywheel is huge - sometimes more than 50% less. Without the additional mass, more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

    In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. Again, the difference is huge as you watch the revs build faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

    The JB lightweight flywheel is designed to be used with a factory organic clutch - the same clutch kit that you would get from any BMW dealer. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches. By using the factory BMW clutch, JB has also made the whole assembly easy to live with when used on the street. The clutch behaves the same as it originally did - just with better throttle response and more power! The JB flywheel can also be rebuilt with a new clutch contact surface - you don't have to buy a new flywheel.

    Aluminum flywheels are considered 'single-mass' flywheels because they do not have the same dampening designs as an original 'dual-mass' flywheel. With a single-mass design more noise and vibration may be noticeable.

    Stock Flywheel Weight = 16.0lbs
    JB Flywheel Weight = 8.0lbs

    This item fits the following BMWs:
    1991-1995 E34 BMW M5
    Part #: 520-090-240
    Price: $445.50 (USD) 
    $495.00 (Sale - Save 10%)
    Free Shipping Free Shipping
    Quantity:   
    Schwaben 21mm and 22mm Double Sided Strut Wrench Both of the most popular strut nut sizes on one wrench make this wrench perfect for suspension work. Also, thanks to its stepped design, it can easily get in to tight spots. Each end has a closed design measuring at 21mm or 22mm.
    Part #: 017822SCH01A
    Price: $12.71 (USD) 
    $16.95 (Sale - Save 25%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Stealth Bulb Set - Single Filament Front & Rear For BMW with Straight Across Pins Stealth Bulb Set - Single Filament Front & Rear For BMW with Straight Across Pins. Fits most newer 2001 and up E46 front and other BMW models in both front and rear. These are the are the best concealment bulbs on the market; invisible in clear lenses when off and bright amber when on. No more ugly orange egg yolk look in your clear corners. Check your stock bulb and compare pins to photo before ordering.
    Part #: TMS264
    Price: $25.46 (USD) 
    $29.95 (Sale - Save 15%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Stealth Bulb Set - Dual Filament Front for Most BMW Models up to 2001 Stealth Bulb Set - Dual Filament Front for Most BMW Models up to 2001. These are the are the best concealment bulbs on the market; invisible in clear lenses when off and bright amber when on. No more ugly orange egg yolk look in your clear corners. Check your stock bulb and compare to photo before ordering.
    Part #: TMS1070
    Price: $25.46 (USD) 
    $29.95 (Sale - Save 15%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Turner Motorsport Baseball Cap / Hat One size fits all, 100% cotton, embroidered baseball cap. The hats have "Championship BMW Race Team" on the back. These are the same hats that are worn by the 2009 Championship winning Turner motorsport Grand-Am/Koni Challenge race team. All include "Championship BMW Race Team" on the back. (Ask for yours autographed by one of our drivers too ! )
    Part #: TMSHAT
    Price: $8.46 (USD) 
    $9.95 (Sale - Save 15%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Upper Spring Hats/Perches (Pair) - 2.5 Inch / 14mm Pin / Square Seat Made in the USA These aluminum upper spring hats are for coil over struts with a 2.5" coil over spring. The specs are listed below; match the hat specs with your spring and strut. For a proper fitment you must confirm the spring hat matches the strut pin, especially on high-end motorsport struts.

    Spring I.D.Strut Pin Diam.Strut Pin Seat
    2.5"14mmsquare

    Part #: TSU9980250
    Price: $50.96 (USD) 
    $59.95 (Sale - Save 15%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Intercomp 2.5 inch Liquid Filled Tire Pressure Gauge 0-60psi Intercomp 2.5" Deluxe 60PSI Air Pressure Gauge: Includes thumb operated bleeder and a high-quality nozzle on a 17" Hose. High visibility with major and minor graduation marks. 2.5" Air Pressure Gauge Liquid-Filled 0-60 psi. The liquid filling helps to reduce variations due to temperature and external pressure. Addiitonally, the liquid helps the gauge to be more shock resistant.
    Part #: 360067
    Price: $45.01 (USD) 
    $52.95 (Sale - Save 15%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Honest Wash Brake Dust Professional Wheel Cleaner -- 32oz Tired of scrubbing every inch of your wheels to get rid of brake dust? Honest Wash's Brake Dust Professional wheel cleaner can be sprayed on and, after just a few minutes, be sprayed off to reveal a clean, bright wheel. No scrubbing needed. Tough enough to remove brake dust while gentle enough to keep from hurting wheels that are painted, powder coated, anodized, machined, and dipped. Safe for alloy rims.
    Part #: HW11
    Price: $17.99 (USD) 
    $19.99 (Sale - Save 10%)
    Quantity:   
    Honest Wash Tire Love - Long Lasting Tire Shine 2oz Sample

    If you are looking for a long lasting, high quality shine, Honest Wash has you covered with their Tire Love tire shine. Applied easy by spraying directly onto your tire or via an applicator, it dries in minutes and lasts days or even weeks, resisting rain and puddles from washing it away. This shine not only improves looks but also prevents tire cracks and flaking by protecting the tire from UV rays and road debris.

    Product Highlights

    • Shine, protect, and restore tires 
    • Protects tires from cracking and flaking 
    • Spray or wipe directly onto tires
    • No "sling" formula drys fast and won't end up on your paint
    Part #: HW07-S
    Price: $2.69 (USD) 
    $2.99 (Sale - Save 10%)
    Quantity:   
    Honest Wash Glass Perfect - Streak-Free Glass Cleaner 5 Gallon Glass Perfect is the best cleaning choice to cover a range of surfaces including: tinted windows, windshields, side windows, mirrors, rear view mirrors, rear windows, headlights, chrome trim and grills, mag wheels, and interior panels including radio screens glass and instrument clusters. It cleans without leaving behind any streaks and completely ammonia free! Safe for PlatiDip and AutoFlex!
    Part #: HW04-5G
    Price: $184.49 (USD) 
    $204.99 (Sale - Save 10%)
    Quantity:   
    Honest Wash Car Show Prep - Quick Detail Spray 2oz Sample

    Keep your car's shine bright with Honest Wash's Car Show Prep detail spray. Containing no acids or petroleum, this is a non-corrosive quick detailer perfect for removing light dust, dirt, and finger prints. In just a few minutes you can have your car looking great for a car show or a simple drive around town!

     

    Made in the USA and is safe with PlastiDip and AutoFlex with no worry of scratching, peeling or fading.

    Part #: HW03-S
    Price: $2.69 (USD) 
    $2.99 (Sale - Save 10%)
    Quantity:   
    Honest Wash Grease Lightning - Multipurpose Degreaser -- 5 Gallon Grease Lightning by Honest Wash is the best option to eliminate dirt, grease, and oil on your vehicle. Made from surfactants that are environmentally safe and bio-degradable, Grease lightning lifts and dissolves deposits of contaminants, letting you wife or rinse away stains on both exterior and interior parts of your vehicle. Best used area with heavy amount of dirt or oil such as cloth and carpet interiors, engines and engine bays, undercarriages, wheel wells, truck beds, door jams, and anywhere stubborn fingerprints won't wash off, such as your PlastiDip coating.
    Part #: HW06-5G
    Price: $161.99 (USD) 
    $179.99 (Sale - Save 10%)
    Quantity:   
    Honest Wash Car Show Kit

    Get last second touch-ups done with the Car Show Kit from Honest Wash.

    Kit includes:

    • 3 microfiber towels
    • 1 tire shine applicator
    • 1 bottle of Car Show Prep quick detailer
    • 1 bottle of Tire Love tire shine
    Part #: HWKT-13
    Price: $34.19 (USD) 
    $37.99 (Sale - Save 10%)
    Quantity:   
    Honest Wash Tire Love - Long Lasting Tire Shine 32oz

    If you are looking for a long lasting, high quality shine, Honest Wash has you covered with their Tire Love tire shine. Applied easy by spraying directly onto your tire or via an applicator, it dries in minutes and lasts days or even weeks, resisting rain and puddles from washing it away. This shine not only improves looks but also prevents tire cracks and flaking by protecting the tire from UV rays and road debris.

    Product Highlights

    • Shine, protect, and restore tires 
    • Protects tires from cracking and flaking 
    • Spray or wipe directly onto tires
    • No "sling" formula drys fast and won't end up on your paint
    Part #: HW07
    Price: $17.99 (USD) 
    $19.99 (Sale - Save 10%)
    Quantity:   
    Honest Wash Bug and Tar Removal Kit The Honest Wash Bug and Tar Removal kit is exactly what you need when the front of your vehicle is being covered with little specs that won't come off easily during normal car washes. Their specially formulated Bug Delete spray is non-corrosive and is safe for all exterior surfaces of your vehicle while still releasing bugs, tar, tree sap, and other contaminants from your paint. Also included in the kit is a microfiber mitt with a scrub side to help get rid of slightly more stubborn areas without damaging your paint.
    Part #: HWKT-16
    Price: $17.99 (USD) 
    $19.99 (Sale - Save 10%)
    Quantity:   
    Tire Dressing Applicator Prevent over spray of shine and runs on the tire by using this Tire Dressing Applicator. Made of contoured foam, this evenly distributes the tire shine to the tire, give you a deep gloss without any mess or need to wipe down body panels afterward. A layer of dense foam acts as a handle to keep your hand clean and free from shine. Simply rinse with water after use to be able to use this applicator again and again!
    Part #: HW18
    Price: $1.79 (USD) 
    $1.99 (Sale - Save 10%)
    Quantity:   
    Honest Wash Tire Love - Long Lasting Tire Shine 5 Gallon

    If you are looking for a long lasting, high quality shine, Honest Wash has you covered with their Tire Love tire shine. Applied easy by spraying directly onto your tire or via an applicator, it dries in minutes and lasts days or even weeks, resisting rain and puddles from washing it away. This shine not only improves looks but also prevents tire cracks and flaking by protecting the tire from UV rays and road debris.

    Product Highlights

    • Shine, protect, and restore tires 
    • Protects tires from cracking and flaking 
    • Spray or wipe directly onto tires
    • No "sling" formula drys fast and won't end up on your paint

      If you are looking for a long lasting, high quality shine, Honest Wash has you covered with their Tire Love tire shine. Applied easy by spraying directly onto your tire or via an applicator, it dries in minutes and lasts days or even weeks, resisting rain and puddles from washing it away. This shine not only improves looks but also prevents tire cracks and flaking by protecting the tire from UV rays and road debris.

      Product Highlights

    • Shine, protect, and restore tires 
    • Protects tires from cracking and flaking 
    • Spray or wipe directly onto tires
    • No "sling" formula drys fast and won't end up on your paint
    Part #: HW07-5G
    Price: $251.99 (USD) 
    $279.99 (Sale - Save 10%)
    Quantity:   
    Turner Motorsport Classic Fitted Tee This classic and comfortable fitted tee is blue and features the classic Turner Motorsport logo in yellow. It's a stylish and comfortable way to show off your enthusiasm for BMW, your favorite parts supplier, and your favorite BMW race team!
    Part #: 910-8420
    Price: $16.96 (USD) 
    $19.95 (Sale - Save 15%)
    Free Shipping Free Shipping
    on orders $199 and up
    Complete Turner Baffled Oil Catch Can Kit - Reverse Flow 8oz

    When we designed this catch we wanted to have the most function options available, the best separation method, and the easiest to service. The Turner engineered catch cans offer a pre-setup design based ion desired flow direction, however this does not limit you to this flow. The inner baffle orientation can be easily adjusted to flow in both directions in case you decide to move this catch can to a different vehicle. A 4 chamber system  baffle system inside the catch can was engineered to create multiple changes in the direction of airflow within the separator to cause oil droplets to fall out of suspension before exiting the catch can. Having a closed / recirculated design reduces oil ingestion and promotes cleaner emissions and odor-less operation.

    Our catch can was also designed with the idea that the cans fill level can easily be checked with a top mounted dipstick and an optional use bottom drain hole. The drain system comes complete with a valve and hose to be mounted at a lower area of the vehicle so when you're doing an oil change you can drain the catch can.

    Features:

    • 6061-T6 billet machined body, anodized black for lasting protection and appearance
    • Strategically positioned 4 chamber baffle system maximizes oil / air separation 
    • Knurled and black anodized oil dipstick makes inspecting oil volume of reservoir clean and simple
    • Sealed with a pre-installed viton O-Ring
    • Includes 2.5mm allen key to remove baffle plates for cleaning
    • Engineered to create multiple changes in the direction of airflow within the separator to cause oil droplets to fall out of suspension before exiting the catch can
    • Closed / recirculated design reduces oil ingestion and promotes cleaner emissions and odor-less operation
    • Optional use drain hole - drain kit included!
    • Universal mounting kit
    Part #: 022798tms01-08KT
    Price: $161.46 (USD) 
    $189.95 (Sale - Save 15%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben Low Profile 2 Ton Aluminum Floor Jack

    Here's what makes this floor jack the best on the market:

    • Dual pump pistons to reach maximum height in 5 pumps
    • Low profile design keeping lowered cars in mind
    • Easy maneuverability 
    • Two piece quick release padded handle for storage or transport.

    Details:

    • Jack Capacity 2 Ton
    • Max Lift Height 20"
    • Low Height 3.25"
    • Chassis Length 26.5"
    • Overall Width 13"
    • Saddle Diameter 4.5"
    • Handle Length 50"
    • Shipping Weight 50 lbs
    Part #: 011362SCH01A
    Price: $202.46 (USD) 
    $269.95 (Sale - Save 25%)
    Quantity:   
    Schwaben 203 Piece Zippered Tool Bag Kit

    A perfect tool kit to carry on the road or keep you work area organized.

    Features:

    • 100 pc. Specialty Bit Kit
    • Metric 3/8" Drive Socket Set
    • 3/8" Drive Ratchet
    • 3/8" Long Flex head Ratchet
    • 8-19 mm Combination Wrench Set
    • External Torx Socket Set
    • 3 pc. Euro Style Locking Pliers
    • 4 pc Plier Set
    • 4 pc 3/8" Extension Set
    • 46 pc 1/4" Drive Set
    • 8 pc Long Torx Socket Set
    • Tool Bag
    Part #: 014121sch01aKT2
    Price: $310.05 (USD) 
    $413.40 (Sale - Save 25%)
    Free Shipping Free Shipping
    Quantity:   
    Intercomp 4 inch Glow in the Dark Tire Pressure Gauge 0-60psi Intercomp 4" Ultra Deluxe 60PSI Air Pressure Gauge: Includes a thumb operated bleeder and high-quality nozzle on a 17" Hose. High visibility Glow in the Dark face with major and minor graduation marks.
    Part #: 360060
    Price: $52.66 (USD) 
    $61.95 (Sale - Save 15%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Upper Spring Hats/Perches (Pair) - 2.25 Inch / 14mm Pin / Square Seat
    Made in the USA These aluminum upper spring hats are for coil over struts with a 2.25" coil over spring. The specs are listed below; match the hat specs with your spring and strut. For a proper fitment you must confirm the spring hat matches the strut pin, especially on high-end motorsport struts.

    Spring I.D.Strut Pin Diam.Strut Pin Seat
    2.25"14mmsquare

    Part #: TSU9980225
    Price: $67.96 (USD) 
    $79.95 (Sale - Save 15%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Turner Motorsport Die-Cut Stickers - 1 These understated black and silver die-cut decals are the perfect stealth way to let others know performance is what your BMW is about. 1" x 7" die-cut vinyl.

    Turner Motorsport vinyl graphics are made from high performance cast graphic film with a UV resistant clear coat which has superior resistance to sunlight and adhesive longevity. The Turner Motorsport Logo is printed in super high quality vinyl inks giving the decal a high quality professional look. We currently offer the Turner Motorsport logo in silver with gloss black trim. As used on our Turner Motorsport Project Cars.

    These stickers are designed to match our official Turner Motorsport windshield banners found here.

    Sold in pairs.
    Part #: 149-100-2
    Price: $5.09 (USD) 
    $5.99 (Sale - Save 15%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Upper Spring Hats/Perches (Pair) - 2.5 Inch / 16mm Pin / Square Seat Made in the USA These aluminum upper spring hats are for coil over struts with a 2.5" coil over spring. The specs are listed below; match the hat specs with your spring and strut. For a proper fitment you must confirm the spring hat matches the strut pin, especially on high-end motorsport struts.

    Spring I.D.Strut Pin Diam.Strut Pin Seat
    2.5"16mmsquare

    Part #: TSU998064C
    Price: $50.96 (USD) 
    $59.95 (Sale - Save 15%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Upper Spring Hats/Perches (Pair) - 60mm / 16mm Pin / Tapered Seat Made in the USA These aluminum upper spring hats are for coil over struts with a 60mm coil over spring. The specs are listed below; match the hat specs with your spring and strut. For a proper fitment you must confirm the spring hat matches the strut pin, especially on high-end motorsport struts.

    Spring I.D.Strut Pin Diam.Strut Pin Seat
    60mm16mmtapered

    Part #: TSU9980559
    Price: $50.96 (USD) 
    $59.95 (Sale - Save 15%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben European Hand Tool Starter Kit

    When owning a car there is almost no level of pride to a true enthusiast than seeing your craftsmanship shine after a long desired project has been finished. Schwaben would like to help all of our fellow enthusiast get a good start by beginning with the right tools. 

     

    Features:

    *3/8" Drive ratchet

    *3/8" Long flex head drive ratchet

    *External Torx socket set

    *12pc Metric Socket Set

    *4pc Swivel head triple square socket set

    *12pc Combination wrench set

    *Schwaben 46pc 1/4" drive set

    Part #: 005981sch01aKT
    Price: $187.46 (USD) 
    $249.95 (Sale - Save 25%)
    Free Shipping Free Shipping
    Quantity:   
    Schwaben 4-Way Lug Wrench Kit The Schwaben four-way lug wrench is big and brawny, but comes apart for easy storage in its own blow-molded plastic case. Four, six-point socket heads in 17, 19, 21, and 23 mm sizes remove most road wheels.
    Part #: ezlw-03
    Price: $26.21 (USD) 
    $34.95 (Sale - Save 25%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben Extended 5/8

    The Schwaben Extended Reach Spark Plug Socket is the perfect tool for removing 5/8-inch spark plugs with deeply recessed plugs.

    The five inch long, rigid socket body provides solid engagement with the plug hex to prevent plug breakage.

    Features:

    • Magnetic ring holds the spark plug but won't stick to the plug porcelain neck like sockets with cheap rubber inserts
    • Chrome plated with durable and attractive polished surface
    • Turn it with a 3/8-inch ratchet or a 19 mm (¾-inch) socket or box wrench at the external hex head
    • Outer diameter of socket is approximately 22mm
    Part #: S-3858-125
    Price: $11.21 (USD) 
    $14.95 (Sale - Save 25%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben Torque-Limiting Wheel Bolt Socket Kit - 3 Pieces

    Handsome sockets are shop tough, plated to resist corrosion, and color-coded for fast identification. Set takes up less room in your tool box than conventional torque sticks, and comes in a handy blow-molded case for portability and easy organization.

    Torque-limiting socket set prevents over-tightening of wheel bolts and lug nuts. Attach them to your ½-inch breaker bar or impact gun and tighten the wheel bolts or lugs until the socket stops tightening at 74 ft-lb (100 Nm). Then final-tighten the wheel fasteners to the recommended specification using a torque wrench.

    Features:

    • 17, 19, and 21 mm six-point impact sockets to fit most metric wheel bolt heads and lug nuts.
    • Combine these with our Protecta Sockets and the Schwaben ½-inch torque wrench for a complete wheel fastener solution.

     

     

    Part #: pts-12-1721
    Price: $44.96 (USD) 
    $59.95 (Sale - Save 25%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben Torx Socket Kit - 9 Pieces

    The most popular Torx® sizes in a sturdy blow molded case for portability and easy organization.

    Features:

    • Durable 1/4"-drive and 3/8"-drive polished chrome shanks have sizes stamped in large characters, making them easy to spot.
    •  T10, T15, T20, T25, T27, T30, T40, T45, and T50 sizes, essential for removing Torx fasteners from all makes and models, import and domestic.
    Part #: hbs-m9pcst
    Price: $18.71 (USD) 
    $24.95 (Sale - Save 25%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben Bosch Alternator Tool Kit - 13 Pieces

    This tool is perfect for making alternator work easy, just another example of having the right tool for the job.

    Features:

    • 13-piece alternator tool kit removes and installs Overrunning Alternator Decouplers (OADs) on most alternators 
    • Unlike solid drive pulleys, OADs have an internal overrunning clutch, and require special tools for removal and installation, which is important when a remanufactured alternator shows up with no pulley installed
    • Schwaben has assembled the tools you need for this job in a convenient blow molded case.