Free Shipping on orders $99 and up! Some exclusions apply. Contiguous US only.

BMW E36 M3 Cylinder Head Parts & Head Bolts

BMW E36 M3 Cylinder Head Parts & Head Bolts Cylinder head parts include all of the pieces of the valvetrain, lifters, rocker arms, head studs, and head bolts. We sell the original BMW or OEM head parts as well as performance upgrades such as titanium valve retainers, upgraded springs, and head studs. We also sell valve shim kits which are perfect for DIY E30 M3 S14 and E46 M3 S54 valve adjustments.
You're currently viewing parts for your (E36) M3 1995-1999. Reset your chassis
For accurate results, specify your model below.
Intake Valve - E36 E46 E34  E39 Z3 (M42, M44, M50, M52, M52TU) Replacement intake valve in the stock size. Fits all VAN0S versions of the M50/M52/M52TU, including 1993-2000 323, 325, 328 and the E36 M3 3.0/3.2. Also fits E39 528 and Z3 2.3, Z3 2.8, MZ3 (S52 3.2), M Roadster, M Coupe.
TRW
Part #: 11341739820
Price: $15.25 (USD) 
Ships in 2 days
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
E36 325, 328 M3 Ferrea Spring Seat Set E36 325, 328 M3 Ferrea Spring Seat Set includes 24 seats. MUST be uses with the Ferrea valve springs. Recommended to be used with the Ferrea Competition Plus Big Valves and Ferrea Titanium Retainers. See links below.

The goal at Ferrea is to create the finest valves and bearings money can buy. With a staggering array of applications for virtually every production engine in existence both gas and diesel Ferrea has the parts you need to finish your next engine project with confidence.

This item fits the following BMWs:
1992-1998 E36 BMW 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1991-1995 E34 BMW 525i
Ferrea
Part #: SL1021-24
Price: $118.80 (USD) 
Ships in 3 Days
Free Shipping Free Shipping
Quantity:   
Elring Cylinder Head Installation Kit - S52 3.2L

If there is a large amount of oil on the sides of the engine or if you can smell burning oil, chances are it's a bad valve cover gasket. The gasket fails and allows oil to seep down onto the side of the engine and other parts causing a mess and reducing the amount of oil in your engine. This replacement gasket from Elring is perfect to prevent any further oil leaks.

Includes everything needed to re-seal your engine's head.

Elring is one of the biggest OEM names in the manufacturing of high quality gaskets that are available for very affordable prices. Elring has supplied many automotive names for years with the gaskets that seal your car's components from day 1 so you can rest assured that these components will last for a long time to come!

Fits the following engines:
S52 3.2L

Elring
Part #: 11129069861
Price: $154.95 (USD) 
In Stock
Free Shipping Free Shipping
Quantity:   
ARP Steel Block Head Stud Kit for M50/M52 & S50/S52 (US Spec) Virtually every top professional BMW engine builder relies on ARP Pro Series head studs. ARP uses a premium grade 8740 alloy that is rated far superior to "aircraft" quality. Each stud is heat-treated to 200,000 psi, ensuring complete heat penetration. ARP studs are threaded after heat-treat, which gives them 1000% (that's ten times!) better fatigue strength than studs threaded prior to heat-treat. Threading the studs after heat-treating is more difficult and costly (as it's harder on tooling) but the results are well worth the effort. These simply are the best head studs we've found for the E36 6 cylinder engines, and we highly recommend them in both the racing and forced induction arena. (Due to the additional clamping force between the head and block, these are IDEAL for turbo charging and supercharging!)

Converting from the factory BMW head bolts to head studs makes it much easier to assemble an engine, especially a racing powerplant which must be serviced frequently (and quickly!), and also ensures proper alignment of the head and gasket. Head studs also provide more accurate and consistent torque loading. Here's why: When you use bolts to secure the head, the fastener is actually being "twisted" while it's being torqued to the proper reading. Accordingly, the bolt is reacting to two different forces simultaneously. A head stud should be installed in a "relaxed" mode -- never crank it in tightly using a jammed nut. If everything is right, the stud should be installed finger tight. Then, when applying torque to the nut, the stud will stretch only on the vertical axis. An information sheet is provided with each set. Kit includes everything pictured -- 14 head bolts, washers, bolts and assembly lubricant.

ARP is a company that prides itself on performance and durability, no matter the application. Offering the finest engine hardware money can buy is the driving initiative at ARP and this is evidenced by the staggering amount of satisfied customers and race teams the world over.

These head studs fit the following BMWs/engines (steel block only)
1992-1995 M50 6 cylinder including 325i, 325is and 525i
1996-1999 M52 6 cylinder including 328i, 328is, 323is, 528i
1995-1995 S50US 3.0 liter including 1995 M3 (US only)
1996-1999 S52US 3.2 liter including 1996-1999 M3 (US) and MZ3
ARP
Part #: 201-4302
Price: $208.95 (USD) 
Ships in 1 day
Free Shipping Free Shipping
Quantity:   
Valve Cover - 11121703341 - E36 323i, 328i, M3, E39 528i

Valve cover cracked? Replace yours today with this Genuine BMW Part. This is the cylinder head cover / valve cover for M52/S52 engines.

When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

This item fits the following BMWs:
1996-1998 E36 BMW 323is 323ic 328i 328is 328ic M3
1997-1998 E39 BMW 528i
1996-1998 E36/7 BMW Z3 2.8
1996-2000 E36/7 BMW M Roadster M Coupe

Genuine BMW
Part #: 11121703341
Price: $408.94 (USD) 
$459.59 (11% off MSRP)
In Stock
Free Shipping Free Shipping
Quantity:   
Supertech
Part #: SPRK-H1000DBM
Price: $739.00 (USD) 
Ships in 10 days
Free Shipping Free Shipping
Quantity:   
Engine Hydraulic Valve Lifter - BMW E36 328i, M3, E46, E39, - M52 M54 M56 S50 S52 Stock OEM hydraulic valve lifter for the M52, M54 and S50 S52 engines. These lifter buckets can last 150,000+ miles but then they no longer fit on the valve stem correctly and a ticking or knocking noise can result. If the lifter is no longer seated correctly, it can lead to the valve not opening correctly. Replacement is straight-forward but requires special tools for working with the camshafts.

When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

This item fits the following BMWs:
1995-1998 E36 BMW 323is 323ic 328i 328is 328ic M3
1997-2003 E39 BMW 525i 528i 530i M5
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
2004-2005 E60 BMW 525i 530i
2004-2005 E83 BMW X3 2.5i X3 3.0i
2000-2006 E53 BMW X5 3.0i
1996-2002 E36/7 BMW Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i
1998-2000 E36/7 BMW M Roadster M Coupe
Genuine BMW
Part #: 11321748884
Price: $37.24 (USD) 
$41.30 (10% off MSRP)
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
M50/M52/S50US/S52 Exhaust Port Block Off Plate

Have an M50/S50 or M52/S52 engine that you need to put in storage? This handy block-off plate fits over the exhaust ports to keep dust, debris, and even creatures from sneaking in through the exhaust. Don't bother with cardboard or shop rags - they won't seal well and will deteriorate after time. These plastic plates are the best semi-permanent solution to sealing your engine for long term storage. Pre-drilled holes fit over the stock exhaust studs and use standard manifold nuts or a regular hex nut.

Not for Euro S50 engine.

Turner Motorsport
Part #: 21442TMSKT
Price: $49.95 (USD) 
Ships in 8 days
Free Shipping Free Shipping
Quantity:   
Turner Header Storage Cap For M50, S50, M52, and S52

Have an M50/S50 or M52/S52 engine that you need to put in storage? These handy block-off plates seal off each manifold outlet to keep dust, debris, and even creatures from sneaking in through the exhaust. Don't bother with cardboard or shop rags - they won't seal well and will deterioriate after time. These extra-thick plastic caps are the best semi-permanent solution to sealing your engine for long term storage. Pre-drilled holes fit over the stock exhaust studs and use standard exhaust nuts or a regular hex nut.

Price is for the pair (for both manifolds).

Not for Euro S50 engine.

Turner Motorsport
Part #: 21441TMSKT
Price: $15.15 (USD) 
$49.95
Limited Qty Sale
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Cylinder Head - Complete - M52, S50, S52 This replacement cylinder head for BMW S52 S50 M52 6 cylinder engine comes completely assembled with new valves, valve springs, valve guides, valve seals and studs. Being assembled this cylinder head makes for a much quicker and easier job of installation. The camshaft is not included but is available separately.

This cylinder head is manufactured in Spain by Amadeo Marti Carbonell, a company that meets or exceeds the ISO 4000, ISO 9000 and TS-16949 standards so you can be assured of a quality part.

This item fits the following BMWs:
1992-1998 E36 BMW 323is 323ic 328i 328is 328ic M3
1995 E34 BMW 525i
1997-1998 E39 BMW 528i
1996-1998 E36/7 BMW Z3 2.8
1998-2000 E36/7 BMW M Roadster M Coupe
AMC
Part #: 11121703637
Price: $1449.95 (USD) 
Ships on Jun 18, 2018
Quantity:   
E36 325, 328 M3 Ferrea Competition Big Valves

Featuring a +1mm oversize, these Ferrea Competition PlusTM valves are some of the best available. Intake head diameter is 33.95mm, Exhaust is 31.5 mm. To manufacture the valves Ferrea uses special aerospace quality alloys, including EV8-Z18, which provides high tensile strength. An exclusive two-step slow forging process ensures proper grain flow and virtually eliminated any damage to the material structure. The valves are then heat treated and stress-relieved over a 48-hour period, which is the crucial base of the molecular integrity. These valves feature avionics-quality hard chrome along with a specially applied hard tip. The engineering staff at Ferrea spends countless hours conducting flow bench tests to achieve an optimum balance of flow, velocity and efficiency in the design of this valve. As a result, these valves incorporate smoother radiuses and unique undercuts. Price includes 12 intake and 12 exhaust valves.

The goal at Ferrea is to create the finest valves and bearings money can buy. With a staggering array of applications for virtually every production engine in existence both gas and diesel Ferrea has the parts you need to finish your next engine project with confidence.

Ferrea
Part #: TMS403
Price: $838.80 (USD) 
Ships in 3 Days
Free Shipping Free Shipping
Quantity:   
OEM Head Bolt Set - M50 M52 S50 S52 Head Bolt Set for all M50 engines with a steel engine block.

When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.​

This item fits the following BMWs:
992-1998 E36 BMW 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1991-1995 E34 BMW 525i
1997-1998 E39 BMW 528i
1998-2000 Z3 BMW M Roadster M Roadster
Victor Reinz
Part #: 11121721938
Price: $19.95 (USD) 
Direct Ship
Quantity:   
E36 325, 328 & M3 Ferrea High Performance Valve Spring Set Ferrea valve springs are developed from high strength alloys, including premium grade chrome silicone steel These springs are manufactured with state-of-the-art equipment. Ferrea springs are heat-treated and stress-relieved, which dramatically increases the spring's life. Strict quality control procedures and cycle testing ensures consistency from batch to batch. Ferrea valve springs provide the stability needed for high lift, high rpm racing and street car engines. Kit includes a set of 24 springs. MUST be used with the Ferrea Spring Seat and Titanium Retainers. See links to these items below.

This item fits the following BMWs:
1992-1998 E36 BMW 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1991-1995 E34 BMW 525i
Ferrea
Part #: S10049-24
Price: $646.80 (USD) 
Ships in 3 Days
Free Shipping Free Shipping
Quantity:   
E36 325, 328 M3 Ferrea Titanium Retainer Set E36 325, 328 M3 Ferrea Titanium Retainer Set - set of 24. Recommended to be used with the Ferrea Competition Plus Big Valves. MUST be used with the Ferrea high-performance valve spring and seat kit. See links below.

The goal at Ferrea is to create the finest valves and bearings money can buy. With a staggering array of applications for virtually every production engine in existence both gas and diesel, Ferrea has the parts you need to finish your next engine project with confidence.

This item fits the following BMWs:
1992-1998 E36 BMW 325i 325is 325ic 328i 328is 328ic M3
1991-1995 E34 BMW 525i
Ferrea
Part #: E11025-24
Price: $478.80 (USD) 
Ships in 3 Days
Free Shipping Free Shipping
Quantity:   
Exhaust Valve for 1993-2000 3-series (M50, M52, M52TU)

Replacement exhaust valve in the stock size. Fits all VAN0S versions of the M50/M52/M52TU, including 1993-2000 323, 325, 328 and the E36 M3 3.0/3.2. Also fits E39 528 and Z3 2.3, Z3 2.8, MZ3 (S52 3.2), M Roadster, M Coupe.

Since the late 1800’s Febi has been fabricating replacement metal parts. This history is self evident in the quality and vast amount of applications they service. With more than 34,000 repair solutions for cars and commercial vehicles you can be sure Febi has you covered.

Febi
Part #: 11341739821
Price: $18.30 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Valve Keeper - M50, M52, S50US, S52, M52TU, M54, N52, N54, N62, S54, S62, S63 This is the OE BMW valve keeper (collet) used to hold the valve spring and seats in place on the valve stem. If you're doing any valve work on the engine these are an absolute must!

When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

Price is per keeper and each valve requires two.

This item fits the following BMWs:
2008-2012 E82 BMW 128i 135i 1M Coupe
1992-1999 E36 BMW 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
2001-2002 E46 BMW M3
2006-2010 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive - Sedan
2006-2010 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2010 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive - Coupe
2007-2010 E93 BMW 328i 335i - Convertible
1991-1995 E34 BMW 525i
1997-2003 E39 BMW 525i 528i 530i M5
2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i
2004-2011 E63 BMW 645ci 650i
2002-2008 E65 BMW 745i 745li 750i 750li
2004-2010 E83 BMW X3 2.5i X3 3.0i X3 3.0si
2000-2006 E53 BMW X5 3.0i
2004-2006 E53 BMW X5 4.4i X5 4.8is
2007-2013 E70 BMW X5 3.0si X5 4.8i X5 xDrive35i X5 xDrive48i
2009+ E70 BMW X5M
2008+ E71 BMW X6 xDrive35i X6 xDrive50i
2009+ E71 BMW X6M
1997-2002 Z3 BMW Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si
2000-2003 E52 BMW Z8 Roadster
Genuine BMW
Part #: 11341461405
Price: $2.43 (USD) 
Ships in 1 day
Free Shipping Free Shipping
on orders $99 and up
Quantity: