Free Shipping on orders $99 and up! Some exclusions apply. Contiguous US only.

BMW E36 M3 Radiators & Cooling System Overhaul Kits

BMW E36 M3 Radiators & Cooling System Overhaul Kits We sell only OEM Behr, Original BMW, or approved aftermarket upgrade radiators for your BMW. It seems BMW took some shortcuts when it came to radiator design and used too many weak materials like plastic for critical connections. The core and sizing of the radiators are generally sufficient for the intended application but problems can occur at hose connections, upper or lower necks, and plastic end tanks. The radiators we sell are all OEM designs to keep the quality high. In some cases the OEM has made design improvements to prevent past issues. There are a number of non-OEM replacement radiators that use even cheaper materials and poor workmanship which only leads to more problems. On some models we offer OEM alternatives that perform as upgrades to the original designs and we also offer full race all-aluminum radiator upgrades that solve all of the issues with plastic radiators.
You're currently viewing parts for your (E36) M3 1995-1999. Reset your chassis
For accurate results, specify your model below.
E36 323/325/328/M3 X-Line Performance Aluminum Radiator

Mishimoto X-Line E36 Aluminum Radiator features -

  • 90% more capacity with thicker core
  • 30 degree reduction in coolant temp
  • All aluminum construction
  • Hanger tabs for Euro oil cooler included
  • More durable and longer lasting than plastic components
  • Excellent fit and finish
  • Unbeatable lifetime warranty and accident-forgiveness

Mishimoto radiators address all of the defects of the stock E36 radiator in a well-engineered and price-competitive direct replacement unit. The Mishimoto X-Line radiator is an all aluminum design that replaces the factory plastic and aluminum stock radiator. The stock plastic end tanks are notorious for cracking and leaks whereas the Mishimoto has aluminum end tanks that will never fail. The X-Line uses a thicker core than stock for 91% more coolant capacity but still fits in the original location with no modifications. More coolant volume means the fluid is not heat soaked for as long (less super heated fluid circulating through the engine). For a direct replacement performance radiator, the Mishimoto is hard to beat!

Mishimoto was established in 2003 as a supplier of cooling components for drift and rally cars. Their radiators and intercoolers soon found a strong following in the hyper competitive drift scene where high horsepower and prolonged high revs dictate the need for durable and robust cooling solutions. The catchy Mishimoto name is a combination of the name of the founder's family pet - Mishi - and "moto". All products are designed and tested in the USA using state-of-the-art CAD tools and prototyping and with continuous evolution of product design. Mishimoto is so dedicated to quality that they offer a limited lifetime warranty and accident forgiveness.

Mishimoto
Part #: MMRADE3692X
Price: $445.50 (USD) 
$495.00 (Sale - Save 10%)
In Stock
Quantity:   
E36 Z3 Upper Radiator Bracket When replacing or removing a radiator on an E36 or Z3, we recommend replacing these upper brackets as they tend to crack / break when removing them. Sold individually.

When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

This item fits the following BMWs:
1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1996-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
Genuine BMW
Part #: 17111723341
Price: $3.72 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Radiator Fan Switch - E36 1996-1999, Z3 1997-2002

This is the E36, Z3 engine radiator double temperature fan switch, 91/99 degree Celsius. This switch is designed to activate the auxiliary fan at the specified temperatures. A faulty switch can lead to the auxiliary fan not activating, causing overheating. 

Since the late 1800’s Febi has been fabricating replacement metal parts. This history is self-evident in the quality and vast amount of applications they serve. With more than 34,000 repair solutions for cars and commercial vehicles, you can be sure Febi has you covered.



This item fits the following BMWs:
1996-1998 E36 BMW 323is 323ic 328i 328is 328ic M3
5/1997-2002 Z3 BMW Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe

Febi
Part #: 61318363677
Price: $34.95 (USD) 
Ships in 2 Days
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
 Turner Comprehensive Fan Delete Kit - E36 (09/1995+)

The fan that attaches to the water pump carries so much rotational mass that it can actually hinder the performance of your engine. To address this, we now offer out line of fan delete kits that replace everything needed to get rid of your fan and fan clutch, without causing cooling issues as a result. This Comprehensive kit is the mid-priced option, including the essentials and an upgraded aluminum thermostat housing that won't crack or break like the brittle plastic housing. 

This kit is best for someone who wants to upgrade their thermostat housing to aluminum, has already upgraded their water pump pulley, and has performed regular maintenance on their engine drive belts.

Included in this kit:

  • 80* thermostat
  • 1 liter of coolant
  • Water Wetter coolant additive
  • Low-temperature coolant temperature sensor/switch
  • Aluminum thermostat housing with gaskets
  • Fan delete nut

Fits the following BMWs:
09/1995-1999 E36 BMW 323is/ic 328i/is/ic M3

**This kit is intended to be used with cars that have a functional auxiliary fan (64508364093) or an upgraded electrical fan installed.**

Packaged by Turner
Part #: FD2Aft95KT
Price: $89.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Performance Cooling Kit - Lite

Looking to improve your cooling system's performance and add some peace of mind at the same time? Look no further. This kit includes everything you need to add performance, durability and longevity to your cooling system without spending a ton of money. Best of all, the upgrade can be performed by a reasonably competent DIY enthusiast in an afternoon. The team at ECS Tuning supplies their excellent silicone radiator hoses, stainless hose clamps, and aluminum coolant bleed screw for increased durability and heat resistance. Meanwhile, a lower pressure expansion tank cap makes for a less costly "weak link" if the system builds too much pressure, potentially saving you from a costly radiator replacement that could leave you stranded. The kit also includes a gallon of Genuine BMW coolant along with 12 ounces of Red Line Water Wetter, which lowers operating temperatures and protects your cooling system from internal corrosion. All you need is this kit, a few hours of free time, and a gallon of distilled water to keep your E36 cool & running at its best!

Kit Contents:

- ECS Tuning Silicone Radiator Hoses

- ECS Tuning Stainless Steel Hose Clamps

- ECS Tuning Heavy Duty Aluminum Coolant Bleeder Screw

- 1.4 Bar Expansion Tank Cap

- Red Line Water Wetter - 12oz

- Genuine BMW Coolant - 1 Gallon

 

Fits the Following BMWs:

E36 323i 325i 328i M3

Packaged by Turner
Part #: e366cyllitetmsKT
Price: $106.21 (USD) 
$124.95 (Sale - Save 15%)
In Stock
Free Shipping Free Shipping
Quantity:   
E36 Euro Upper Radiator Cover This radiator cover is from the Euro market M3 and is a nice touch when cleaning up your US M3 engine bay. It's the same shape and covers the radiator and radiator support but has a different look than the usual US piece. That helps your engine bay stand out when showing it off. The Euro radiator cover does not have a cooling duct for the alternator like the US cover so you will have to take that into consideration.

When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

This item fits the following BMWs:
1992-1999  E36 BMW  323is 323ic 325i 325is 325ic 328i 328is 328ic M3
Genuine BMW
Part #: 517122522681
Price: $99.95 (USD) 
Ships on Jun 1, 2018
Free Shipping Free Shipping
Quantity:   
Turner Electric Fan Conversion - E36 BMW (09/1995+)

Looking to free up horsepower and upgrade your cooling? Then this Electric Fan Conversion kit is the perfect choice! The fan and clutch that connect to the water pump add additional rotating mass to the drive line. By removing them and converting your system to an electric fan, the engine has to do less work, giving you that extra little bit of power. In this kit we include a lower temperature thermostat, coolant additive, and low temperature fan switch that engages the electric fan at a lower temperature, keeping your engine cool and lowering the drag and unneeded weight from the front end of your BMW.

Included in this kit:

  • 80 degree Celsius thermostat
  • 1 liter of Genuine BMW coolant
  • Water Wetter coolant additive
  • Low-temperature coolant temperature sensor/switch
  • 16 inch Electric fan 
  • Electric fan mounting kit
  • Fan controller kit with probe sensor 
  • Fan delete nut

Fits the following BMWs:
09/1995-1999 E36 BMW 323is/ic 328i/is/ic M3

Packaged by Turner
Part #: EFANCON1KT
Price: $247.93 (USD) 
In Stock
Free Shipping Free Shipping
Quantity:   
 Turner Ultimate Fan Delete Kit - E36 (up to 09/1995)

The fan that attaches to the water pump carries so much rotational mass that it can actually hinder the performance of your engine. To address this, we now offer out line of fan delete kits that replace everything needed to get rid of your fan and fan clutch, without causing cooling issues as a result. This Ultimate kit is the top tier option, including the essential conversion components, the upgraded aluminum thermostat housing, and a brand new accessory belt.

This kit is best for someone who has not performed recent cooling system maintenance or who wants to replace everything at once for increased reliability and longevity.

Included in this kit:

  • 80* thermostat
  • 1 liter of coolant
  • Water Wetter coolant additive
  • Low-temperature coolant temperature sensor/switch
  • Aluminum thermostat housing with gaskets
  • Fan delete nut
  • ECS  Aluminum Water Pump Pulley - Black
  • Accessory Belt

Fits the following BMWs:
1992-09/1995 E36 BMW 325i/is/ic 328i/is/ic M3

**This kit is intended to be used with cars that have a functional auxiliary fan (64508364093) or an upgraded electrical fan installed.**

Packaged by Turner
Part #: FD3Pre95KT
Price: $138.99 (USD) 
In Stock
Free Shipping Free Shipping
Quantity:   
E36 Fluidyne/Turner 44mm Aluminum Radiator Upgrade RE-DESIGNED AND RE-ENGINEERED!!

We have collaborated with FLUIDYNE on improving their already excellent aluminum radiator for the E36. The features that made FLUIDYNE a leader in the E36 radiator market continue but with some new elements requested by the Turner Motorsport R&D staff. We have made the radiator easier to fit with the stock fan shroud and hanger mounts. The shroud will be better secured to the radiator than before which saves time and hassle. Our goal was to make this as close to a "drop-in" replacement as possible. We also had new hangers installed on the bottom to accommodate the factory E36 Euro oil cooler and our oil cooler hangers. A zinc anode drain plug absorbs static electricity from the coolant which helps prolong the life of temp sensors. There has never been a better E36 radiator upgrade than this! For an E36 track or modded street car there should be no reason to ever go back to a stock plastic radiator or compromise on a cheap aluminum radiator. The latest FLUIDYNE is the best there is.

The stock radiator has an aluminum core but with plastic end-tanks and hose connections that become brittle and can leak or crack. You may not even realize your radiator neck is cracked until it's too late and you're stranded on the side of the freeway or unable to continue with your track day. An all-aluminum design does not suffer the defects of similar plastic construction. FLUIDYNE quality is what sets them apart from every other manufacturer. Their radiators feature a high-tech CAB-brazed core construction instead of epoxy (which can leak). All tanks and brackets are TIG welded by hand in the USA. If you plan on owning your BMW for many years to come, or are using it in a situation where failure is NOT an option such as track or racing, then this should be your only option instead of the failure-prone stock radiators.

This radiator fits the following BMWs:
1995-1999 E36 M3 including coupe, sedan & convertible
1992-1995 E36 325i & 325is sedan/coupe/convt
1996-1998 E36 328i, 328is & 323is coupe/sedan/convt
1999-1999 E36 328is & 323is
Turner Motorsport
Part #: FHP13-92E36
Price: $599.95 (USD) 
In Stock
Quantity:   
E36 Mishimoto Aluminum Coolant Reservoir Tank

If you have ever experienced a leaking plastic BMW expansion tank you will realize the value of this aluminum version straight away. Even if a failure has not happened to you, it's easy to tell this tank is much stronger and more durable than the plastic used in the stock design. Mishimoto has extended their cooling system expertise from aluminum radiators to expansion tank design. The original BMW plastic tanks suffer from leaks and failures with no warning. While being light weight and recyclable the design and construction of the stock tank is just not up for reliable long term use. Mishimoto has designed their tank with an integrated dipstick/bleeder and a 1.3bar cap that raises the boiling point of the system (the stock radiator cap is not compatible).

The Mishimoto expansion tank takes the place of the stock tank in the stock plastic radiator fan shroud or in the Mishimoto electric fan and shroud upgrade. It takes the stock coolant level sensor and the upper and lower hoses as well.

Lifetime warranty!

Mishimoto
Part #: MMRT-E36-92E
Price: $108.00 (USD) 
$120 (Sale - Save 10%)
In Stock
Free Shipping Free Shipping
Expansion Tank Cap - 1.4 Bar - E36 318i 323i 325i 328i M3

This expansion tank cap, from the E30 325is, is designed to give way at 20 PSI instead of 30 PSI, like the stock cap. In the event the system over-pressurizes, this cap should let go first, potentially saving your radiator, hoses, or other vital cooling system components. While there's no guarantee it will save your radiator, this small part could mean the difference between calling a tow service and making it home, and a little extra insurance never hurt. This cap is a high-quality aftermarket part from an OE supplier.

Fits the Following BMWs:

E36 318i 323i 325i 328i M3

Febi
Part #: 17111742232
Price: $8.44 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Coolant Level Sensor for Late E36 6-cyl, Early E39 528 Coolant Level Sensor for E36 325 and M3 with a production date of June 1995 or later, E36 328 with a production date of March 1996 or later, and E39 528 with a production date of Sept. 1998 or earlier. Vemo offers a wide range of water pumps, sensors and auxiliary fans for BMW and Mini. Delivering OE-quality at an affordable price without compromising quality, that's Vemo.
Vemo
Part #: 61318360855
Price: $9.99 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
E36 323/325/328/M3 Mishimoto Performance Aluminum Radiator

Mishimoto E36 Aluminum Radiator features -

  • All aluminum construction
  • More durable and longer lasting than plastic components
  • 30% more capacity in the same space
  • Excellent fit and finish
  • Unbeatable lifetime warranty and accident-forgiveness

Mishimoto radiators address all of the defects of the stock E36 radiator in a well-engineered and price-competitive direct replacement unit. The Mishimoto radiator is an all aluminum design that replaces the factory plastic and aluminum stock radiator. The stock plastic end tanks are notorious for cracking and leaks whereas the Mishimoto has aluminum end tanks that will never fail. Mishimoto can also build 30% more coolant capacity into the a radiator that fits in the original location with no modifications. More coolant volume means the fluid is not heat soaked for as long (less super heated fluid circulating through the engine). For a direct replacement performance radiator, the Mishimoto is hard to beat!

Mishimoto was established in 2003 as a supplier of cooling components for drift and rally cars. Their radiators and intercoolers soon found a strong following in the hyper competitive drift scene where high horsepower and prolonged high revs dictate the need for durable and robust cooling solutions. The catchy Mishimoto name is a combination of the name of the founder's family pet - Mishi - and "moto". All products are designed and tested in the USA using state-of-the-art CAD tools and prototyping and with continuous evolution of product design. Mishimoto is so dedicated to quality that they offer a limited lifetime warranty and accident forgiveness.

Mishimoto
Part #: MMRADE3692
Price: $229.50 (USD) 
$255.00 (Sale - Save 10%)
In Stock
Quantity:   
 Turner Ultimate Fan Delete Kit - E36 (09/1995+)

The fan that attaches to the water pump carries so much rotational mass that it can actually hinder the performance of your engine. To address this, we now offer out line of fan delete kits that replace everything needed to get rid of your fan and fan clutch, without causing cooling issues as a result. This Ultimate kit is the top tier option, including the essential conversion components, the upgraded aluminum thermostat housing, and a brand new accessory belt.

This kit is best for someone who has not performed recent cooling system maintenance or who wants to replace everything at once for increased reliability and longevity.

Included in this kit:

  • 80* thermostat
  • 1 liter of coolant
  • Water Wetter coolant additive
  • Low-temperature coolant temperature sensor/switch
  • Aluminum thermostat housing with gaskets
  • Fan delete nut
  • ECS  Aluminum Water Pump Pulley - Black
  • Accessory Belt

Fits the following BMWs:
09/1995-1999 E36 BMW 323is/ic 328i/is/ic M3

**This kit is intended to be used with cars that have a functional auxiliary fan (64508364093) or an upgraded electrical fan installed.**

Packaged by Turner
Part #: FD3Aft95KT
Price: $149.95 (USD) 
In Stock
Free Shipping Free Shipping
Quantity:   
Radiator Fan Switch - 91/99 degree - E30 E36 E34 E32 E31 Z3 Engine radiator double temperature fan switch, 91/99 degree celsius. This switch is designed to activate the auxiliary fan at the specified temperatures. A faulty switch can lead to the auxiliary fan not activating, causing over heating.
Since the late 1800’s Febi has been fabricating replacement metal parts. This history is self evident in the quality and vast amount of applications they service. With more than 34,000 repair solutions for cars and commercial vehicles you can be sure Febi has you covered.
This item fits the following BMWs:
1987-1991 E30 BMW 318i 318is 318ic 325e 325es 325i 325ic 325is 325ix M3
1992-1995 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic M3
1989-1995 E34 BMW 525i 530i 535i 540i M5
1988-1994 E32 BMW 735i 735il 740i 740il 750il
1990-1999 E31 BMW 840i 840ci 850i 850ci 850csi
1996-7/1996 Z3 BMW Z3 1.9
1996-5/1997 Z3 BMW Z3 2.8
Febi
Part #: 61311378073
Price: $32.21 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Complete Cooling System Overhaul Package - 1992-1999 E36 325i/328i/M3 This is a compete cooling system overhaul kit, which includes all of the common E36 cooling system parts bundled into a complete package. The basic overhaul includes: water pump, radiator, radiator hoses, and thermostat. We bundled these together with a package discount for your convenience and savings. Additional items are also available to better cover your cooling system repair. Contact us if you need any other E36 cooling system parts.

The original E36's primary cooling components were prone to failure within 60k miles (or less in many cases). With better materials over the years we've seen that interval increase and you can now count on your water pump and radiator lasting at least 100,000 miles. That doesn't mean you can set aside preventaive maintenance. A failure in the cooling system can lead to overheating and catastrophic engine failure. Don't gamble your engine! By replacing these core items preventatively, such as the radiator & waterpump, you are defusing what could be a ticking cooling system time bomb. And if you've had a failure of one of these parts, now is the time to refresh your cooling system.

Top Turner Tip!
The very earliest E36s had infamous cooling system failures. But those are a thing of the past! We've got the best combination of parts to ensure a bulletproof E36 cooling system and it doesn't have to cost an arm and a leg. Our basic cooling package (OEM radiator and OE BMW water pump with composite impeller) is much better quality than what was available 20 years ago. And we can upgrade the system with full aluminum radiators, silicone hoses, and a stronger water pump. There are no more excuses for a weak E36 cooling system.

Basic Kit Contents:
17111469179, radiator (OEM Behr)
11517527799, water pump (OE BMW)
11537511580, 88°C thermostat (OEM Behr/Hella)
11531708499, upper radiator hose (OEM Rein/CRP)
11531726344, lower radiator hose (OEM Rein/CRP)
17111742231, expansion tank cap (OEM Behr/Hella)

Cooling Kit Options:
E36 Water Pump Options
(click to expand)
OE BMW with composite impeller. The original BMW water pumps had plastic impellers which degraded and failed. The latest design uses composites that are much better and will not corrode. Compared to a metal impeller, the composite is lighter so it's more efficient and it will not wear out the bearings. We don't even offer the metal impeller pumps with this kit because the BMW composite one is so much better.
Stewart high performance. The ultimate in M50 water pumps! It features a stainless steel impeller, heavy-duty bearings, a better o-ring seal, and flows 20% more than the stock pump. If indestructible is what you're looking for, this is the pump to go with. It also comes with a lifetime warranty for piece of mind.
E36 Radiators
(click to expand)
The stock radiator and fan combination has no downside in capacity. But where it lacks is in durability. The plastic tanks and hose necks are prone to cracking and then leaking. If you notice ANY greenish-white staining on the plastic then it's a sure sign of a crack. To avoid the plastic failures altogether, move up to a full aluminum radiator.

The MZ3 radiator has a thicker core and more capacity. Any time you can store the coolant away from the engine the better it will be. It will have less heat soak and lower overall temperatures.
The budget aluminum radiator is the same size as stock but obviously doesn't have the plastic.
The Fluidyne was designed with input from our own techs and race team. It's our go-to radiator for racing and track use.
E36 Expansion Tank
(click to expand)
The original expansion tank is prone to cracks and leakage. Again - it's made from a weak plastic. The material has improved over the years but the only option remains an OEM plastic tank. It's a good idea to replace it if you're doing a whole overhaul. Don't re-use the original tank if you're going to the trouble of replacing everything else!
E36 Thermostat Housing
(click to expand)
The original BMW plastic thermostat housing is brittle and does not seal well. We only sell it under protest. Instead we've been selling this aluminum housing for the last 20+ years. The aluminum does not have the same shortcomings as the plastic one. We made this item an option in case you already have the aluminum housing.

Use the options below to build your cooling package.

This cooling system overhaul kit fits the following BMWs:
1992-1999 E36 BMW 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
Turner Motorsport
Part #: TMS2003
Price: $397.03 (USD) 
$487.58 (Sale - Save 19%)
Direct Ship
E36 OEM Behr Radiator A common failure item on the 1992-1999 E36 3 series is the radiator. It is such a common failure item we recommend replacing this item preventatively every 80,000 miles. This Radiator is made by Behr, a high quality OE manufacturer. Replaces part numbers 17112241912 and 17111728908 and 17111723784.

Hailing from Stuttgart, Mahle-Behr specializes in automotive cooling systems. From air conditioning to engine cooling M-B has you covered with OE-quality replacement parts.

This item fits the following BMWs:
1992-1998  E36 BMW  323is 323ic 325i 325is 325ic 328i 328is 328ic M3
Mahle-Behr
Part #: 17111469179
Price: $129.95 (USD) 
Direct Ship
Quantity:   
E36 Aluminum Radiator Upgrade with Oil Cooler Tabs The cooling system may be the E36's biggest letdown. Many plastic components in the system were not manufactured for longevity, especially when used in racing/track environments. Two areas of the stock radiator that are prone to failure are the plastic end-tanks and the plastic necks for the upper and lower hoses. The plastic will become brittle and crack. The solution is to use more durable materials such as aluminum or composites. This all aluminum radiator sourced from Asia, is an economic alternative to the premium pieces from PWR and Fluidyne while still addressing the stock radiator's plastic shortcomings. We have tried this radiator in some of our E36 track cars and it fits just like the stock OEM with all of the accessories and shrouds fitting just like the original. It's slightly thicker but has the same surface area as the original radiator. There won't be any significant change in coolant volume and we don't expect it to lower coolant temps. But if you're installing the OEM plastic version over and over this may be the perfect alternative at a low cost. This is great for someone who was using the plastic radiator with an oil cooler but couldn't find a low cost aluminum version that would work with the oil cooler.

Note: this radiator does come with the tabs on the bottom for mounting the factory Euro oil cooler. Our Euro Oil Cooler Mouting Brackets are still required to finish the install.

This item fits the following BMWs:
1992-1999 E36 BMW 323is 323ic 325i 325is 325ic 328i 328is 328ic M3 - Manual Transmissoin Only!
Turner Motorsport
Part #: 17111469179-PER
Price: $209.95 (USD) 
In Stock
Quantity:   
OEM Behr Coolant Expansion Tank Cap - E36 E46 E34 E39 E32 E38 E65 X3 X5 Z4 This radiator expansion tank cap is used most BMW's from 1991-2006. It is a common failure item. When this item fails, it cannot hold pressure which results in your BMW overheating. If you are overhauling your coolant system, now is the time to consider preventative replacing this cap. It is also referred to as the coolant reservoir cap.

Hailing from Stuttgart, Mahle-Behr specializes in automotive cooling systems. From air conditioning to engine cooling M-B has you covered with OE-quality replacement parts.

This item fits the following BMWs:
1990-1991 E30 BMW 318i 318is 318ic
1992-1998 E36 BMW 318i 318is 318ic 323is 323ic 325i 325is 325ic 328i 328is M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
1989-1995 E34 BMW 530i 535i 540i M5
1991-1995 E34 BMW 525i
1997-2003 E39 BMW 525i 528i 530i 540i M5
1989-1994 E32 BMW 735i 735il 740i 740il 750il
1995-2001 E38 BMW 740i 740il 750il
2002-2008 E65 BMW 745i 745li 750i 750li 760i 760li
1990-1998 E31 BMW 840i 840ci 850i 850ci 850csi
2004-2011 E83 BMW X3 2.5i X3 3.0i X3 3.0si
2000-2006 E53 BMW X5 30.0i X5 4.4i X5 4.6is X5 4.8is
1996-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Coupe M Roadster
2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si M Roadster M Coupe
2000-2003 E52 BMW Z8 Z8 Alpina
2007+ E90 BMW 335i & 335xi
Mahle-Behr
Part #: 17111742231
Price: $9.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Radiator Fan Shroud - E36 Z3  6 cyl This radiator fan shroud mounts to your radiator and helps to direct airflow through the radiator. It's also the mounting point for the coolant reservoir.

When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.​

This item fits the following BMWs:
1992-1998 E36 BMW 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1997-1998 Z3 BMW Z3 2.8
1998-2000 Z3 BMW M Roadster M Roadster
Genuine BMW
Part #: 17111723031
Price: $56.96 (USD) 
$65.54 (13% off MSRP)
In Stock
Quantity:   
Aluminum Coolant Bleeder Screw Replace the flimsy plastic bleeder screw used in the coolant expansion tank or in one of the cooling system hoses with this high quality, durable, aluminum bleeder screw. The stock plastic screw can deform over time due to heat or even regular use. We have even seen the head of the screw snap off, leaving the threaded body stuck in the expansion tank. This aluminum screw will help to prevent sudden failure of the bleeder screw, which can result in immediate overheating of the car.
ECS
Part #: 003530ECS01A
Price: $7.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
 Turner Basic Fan Delete Kit - E36 (up to 09/1995)

The fan that attaches to the water pump carries so much rotational mass that it can actually hinder the performance of your engine. To address this, we now offer out line of fan delete kits that replace everything needed to get rid of your fan and fan clutch, without causing cooling issues as a result. This basic kit is the cheapest option, including just the bare essentials to get the job done and get your car running without a fan.

This kit is best for someone who has already upgraded their thermostat housing and/or water pump pulley and has performed regular maintenance on their engine drive belts.

Included in this kit:

  • 80* thermostat
  • 1 liter of coolant
  • Water Wetter coolant additive
  • Low-temperature coolant temperature sensor/switch

Fits the following BMWs:
1992-09/1995 E36 BMW 325i/is/ic 328i/is/ic M3

**This kit is intended to be used with cars that have a functional auxiliary fan (64508364093) or an upgraded electrical fan installed.**

Packaged by Turner
Part #: FD1Pre95KT
Price: $56.81 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Automatic Transmission Cooler - E36 Z3 E34 This transmission fluid/oil cooler fits E36 318i 318is 318ti 323i 323is 325i 325is 328i 328is M3, E34 525i 530i 1993-1995 and Z3 1.9 2.3 2.5i 2.8 3.0i with automatic transmission.

This oil cooler fits the following BMWs:
1992-1998 E36 BMW 318i 318is 318ti 323is 325i 325is 328i 328is M3
1993-1995 E34 BMW 525i 525i Wagon
1994-1995 E34 BMW 530i 530i Wagon
1996-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0ibr>
ACM
Part #: 17201728770
Price: $249.95 (USD) 
In Stock
Free Shipping Free Shipping
Quantity:   
BMW Expanding Rivet The most common use for this rivet is to secure the radiator fan shroud to the radiator. This rivet can also be used on a wide variety of other applications as well.

When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.
Genuine BMW
Part #: 17111712963
Price: $0.99 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
OEM Mahle-Behr Coolant Expansion Tank - E36/E39/Z3 6 cylinder 1992-1998 Hailing from Stuttgart, Mahle-Behr specializes in automotive cooling systems. From air conditioning to engine cooling M-B has you covered with OE-quality replacement parts.
Mahle-Behr
Part #: 17111723520
Price: $32.62 (USD) 
$102.75 (68% off MSRP)
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Rubber Bushing Insert for Upper Radiator Bracket - E36 E34

BMW RADIATOR RUBBER MOUNTING 17201719414

Mission Trading Company is a worldwide leader in the manufacturing of European, Japanese and domestic auto parts. With factories around the world producing parts to the most stringent of standards, MTC is there with the parts for your next project.

MTC
Part #: 17201719414
Price: $1.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
E36 PWR 42mm Aluminum Radiator Upgrade The 42mm PWR Euro E36 radiator fits the Euro E36 M3 models as well as US-spec E36 325, 328, and M3s. This radiator has a core that is 4mm larger than the stock Behr radiator. If you're looking for a radiator with more cooling capacity and a provision for the stock Euro oil cooler, this is the one. Everyone knows the E36 has an Achilles heal in the cooling system with flimsy radiator necks, plastic materials, unreliable water pumps, and not a lot of capacity for some applications. PWR has addressed some of these issues with a slightly thicker radiator, able to hold more fluid. Increasing the amount of fluid in the system leads to shorter saturation times (the length of time the cooling fluid is exposed to engine heat) which will give you more consistent engine temperatures, reducing wear and tear on other cooling components such as the water pump and thermostat. This is great as a durable replacement radiator for a street car or as an upgrade for a track car. For super-serious cooling capacity check out our PWR 55mm radiator, however, if you don't need the additional capacity we recommend the 42mm unit because of its lighter weight (both in the radiator itself and carrying less fluid).

Not only is this radiator larger, it's designed with the stresses of motorsports in mind. The cooling vanes use a unique oven-brazed bonding technology that will not fatigue and crack like epoxyed construction. We have been more impressed with the fitment and quality of PWR over any other brand currently on the market. Aircraft-grade aluminum is used for the tanks and frame, which are TIG-welded for superior strength. We like this radiator a lot for dual-purpose track/street cars because it does not intrude too much into the engine bay and it's a direct fit with the factory Euro oil cooler and factory mounting hanger (note: not TMS oil cooler hardware). The factory Euro oil cooler hanger will have to be used if you're using the factory oil cooler (we sell the hanger alone if you need it). That makes this radiator a plug-in upgrade for true Euro-spec cars. With or without an oil cooler, this radiator is a direct replacement for the stock E36 radiator, with all of the same hose locations and fittings as the original radiator. It mounts to the car with the original clips on the radiator support and the fan shroud/expansion tank bolts to the radiator (you will need to supply your own M6 and M8 hardware as spacing and installing the shroud can be done several different ways). Each radiator is pressure-tested during manufacturing.

PWR is a world-renowned radiator manufacturer, supplying all forms of motorsport from Formula One (2010 World Champion Sebastian Vettel) to WRC to NASCAR. Our TMS Race Team uses PWR for our cooling needs in the Rolex GT and Continental Sports Car series.

E36 PWR Aluminum Radiator Applications:
1992-1995 E36 325i, 325is, 325ic
1996-1999 E36 323is, 323ic, 328i, 328is, 328ic
1995-1999 E36 M3 (US model)
1994-1999 E36 Euro M3 (reuses factory oil cooler hanger)
PWR
Part #: PWR6221
Price: $945.00 (USD) 
Ships on Jun 15, 2018
CSF High Performance Aluminum Radiator - E36

CSF is one of the premier cooling product specialists available on the market thanks to designs such as their High Performance Aluminum Radiators. Using a two-row, triple-pass designed core, this radiator gives you all the cooling you could ever need. Paired with these radiators are CNC machined brackets and corrosion resistant hardware that allow final installation to have a same as stock fitment! This enables you to have much higher cooling without having to cut away any metal or delete any important components just for the sake of lower coolant temperatures. 

Features:

  • Two-row, triple-pass design radiator core
  • CNC machined mounting brackets
  • All needed hardware included
  • Hand polished aluminum with a mirror-like finish
  • Stock fitment prevents modification to engine bay

Fits the following BMWs:
1992-1999 E36 BMW All Submodels

CSF
Part #: 3054
Price: $255.55 (USD) 
In Stock
Free Shipping Free Shipping
Quantity:   
 Turner Comprehensive Fan Delete Kit - E36 (up to 09/1995)

The fan that attaches to the water pump carries so much rotational mass that it can actually hinder the performance of your engine. To address this, we now offer out line of fan delete kits that replace everything needed to get rid of your fan and fan clutch, without causing cooling issues as a result. This Comprehensive kit is the mid-priced option, including the essentials and an upgraded aluminum thermostat housing that won't crack or break like the brittle plastic housing. 

This kit is best for someone who wants to upgrade their thermostat housing to aluminum, has already upgraded their water pump pulley, and has performed regular maintenance on their engine drive belts.

Included in this kit:

  • 80* thermostat
  • 1 liter of coolant
  • Water Wetter coolant additive
  • Low-temperature coolant temperature sensor/switch
  • Aluminum thermostat housing with gaskets
  • Fan delete nut

Fits the following BMWs:
1992-09/1995 E36 BMW 325i/is/ic 328i/is/ic M3

**This kit is intended to be used with cars that have a functional auxiliary fan (64508364093) or an upgraded electrical fan installed.**

Packaged by Turner
Part #: FD2Pre95KT
Price: $79.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
E36 PWR 55mm Aluminum Radiator Upgrade This PWR radiator for the E36 325, 328, and M3 is a super-large 55mm core with a larger tank capacity for bulletproof cooling. If you're looking for the most complete and unbeatable radiator solution for your E36, this is the best we have seen. Everyone knows the E36 has an Achilles heal in the cooling system with flimsy radiator necks, plastic materials, unreliable water pumps, and not a lot of capacity for some applications. PWR has addressed some of these issues with the ultimate radiator. The 55mm core is a full 13-17mm thicker than the stock radiator. With minor adjusting during installation, all of the factory shrouds and fans will fit. Having a greater capacity means less saturation time for the cooling fluid which leads to more consistent engine temperatures, reducing wear and tear on other cooling components such as the water pump and thermostat. It's also hugely beneficial when using forced induction where increased underhood temperatures will snowball through the rest of the engine compartment and eventually the cooling system. Don't let your radiator end your race!

Not only is this radiator larger, it's designed with the stresses of motorsports in mind. The cooling vanes use a unique oven brazed bonding technology that will not fatigue and crack like epoxyed construction. We have been more impressed with the fitment and quality of PWR over any other brand currently on the market. Aircraft-grade aluminum is used for the tanks and frame, which are TIG-welded for superior strength. The bottom of this radiator incorporates hangers which can be used to mount the stock Euro oil cooler or the TMS Oil Cooler Kit. We have used this on in-house and customer projects and it is a replacement for the stock E36 radiator, with all of the same hose locations and fittings as the original radiator. It mounts to the car with the original clips on the radiator support and the fan shroud/expansion tank bolts to the radiator (you will need to supply your own hardware as spacing and installing the shroud can be done several different ways). But because this is an extra large version of the stock radiator some manual adjusting and fitment care will be required. Professional installation is not required but may be necessary. Each radiator is pressure-tested during manufacturing. Because of the extra depth required between the radiator and engine, extra care will be needed when installed with forced induction kits, non-stock oil coolers, and lines.

PWR is a world-renowned radiator manufacturer, supplying all forms of motorsport from Formula One (2010 World Champion Sebastian Vettel) to WRC to NASCAR. Our TMS Race Team uses PWR for our cooling needs in the Rolex GT and Continental Sports Car series.

E36 PWR Aluminum Radiator Applications:
1992-1995 E36 325i, 325is, 325ic
1996-1999 E36 323is, 323ic, 328i, 328is, 328ic
1995-1999 E36 M3 (US model)
1994-1999 E36 Euro M3 (requires oil cooler hangers - click here)
PWR
Part #: PWR5533
Price: $995.95 (USD) 
Ships on Jun 15, 2018
Free Shipping Free Shipping
Quantity:   
Turner Electric Fan Conversion - E36 BMW (up to 09/1995)

Looking to free up horsepower and upgrade your cooling? Then this Electric Fan Conversion kit is the perfect choice! The fan and clutch that connect to the water pump add additional rotating mass to the drive line. By removing them and converting your system to an electric fan, the engine has to do less work, giving you that extra little bit of power. In this kit we include a lower temperature thermostat, coolant additive, and low temperature fan switch that engages the electric fan at a lower temperature, keeping your engine cool and lowering the drag and unneeded weight from the front end of your BMW.

Included in this kit:

  • 80 degree Celsius thermostat
  • 1 liter of Genuine BMW coolant
  • Water Wetter coolant additive
  • Low-temperature coolant temperature sensor/switch
  • 16 inch Electric fan 
  • Electric fan mounting kit
  • Fan controller kit with probe sensor 
  • Fan delete nut

Fits the following BMWs:
1992-09/1995 E36 BMW 325i/is/ic 328i/is/ic M3

Packaged by Turner
Part #: EFANCON2KT
Price: $236.98 (USD) 
In Stock
Free Shipping Free Shipping
Quantity:   
OEM Style Hose Clamps Hose clamps for radiator hoses, coolant hoses, vacuum hoses, or intake hoses. These hose clamps are the same style as your OEM hoses with a smooth inside band to prevent cutting into the hose material.

Features:
  • 9mm band width
  • 6mm hex & slotted head
  • Smooth inside of band = optimal hose protection
  • OEM
  • 430 Stainless steel band and housing with zinc plated steel screw
  • Asymmetric housing = even distribution of forces and prevents tilting of the clamp when tightening
  • Screw support = ease of assembly due to the safe guidance of the emerging band
  • Short housing saddle = even contact pressure = improved efficiency

    Part NumberDescriptionClamping Range in MMClamping Range in Inches
    008-12T8-12 HOSE CLAMP8mm-12mm5/16"-1/2"
    008-16T8-16 HOSE CLAMP8mm-16mm5/16"-5/8"
    012-20T12-20 HOSE CLAMP12mm-20mm1/2"-3/4"
    016-27T16-27 HOSE CLAMP16mm-27mm5/8"-11/16"
    020-32T20-32 HOSE CLAMP20mm-32mm3/4"-1 1/4"
    025-40T25-40 HOSE CLAMP25mm-40mm1"-1 5/8"
    030-45T30-45 HOSE CLAMP30mm-45mm1 3/16"-1 3/4"
    032-50T32-50 HOSE CLAMP32mm-50mm1 3/8"-2"
    040-60T40-60 HOSE CLAMP40mm-60mm1 5/8"-2 3/8"
    050-70T50-70 HOSE CLAMP50mm-70mm2"-2 3/4"
    060-80T60-80 HOSE CLAMP60mm-80mm2 3/8"-3 1/8"
    070-90T70-90 HOSE CLAMP70mm-90mm2 3/4"-3 1/2"
    080-100T80-100 HOSE CLAMP80mm-100mm3 1/8"-4"
    090-110T90-110 HOSE CLAMP90mm-110mm3 1/2"-4 3/8"
    110-130T110-130 HOSE CLAMP110mm-130mm4 3/8"-5 1/8"
  • Turner Motorsport
    Part #: Hose-Clamps
    Price: $0.57 (USD) 
    $2.19 (Sale - Save 74%)
    In Stock
    Free Shipping Free Shipping
    on orders $99 and up
     Turner Basic Fan Delete Kit - E36 (09/1995+)

    The fan that attaches to the water pump carries so much rotational mass that it can actually hinder the performance of your engine. To address this, we now offer out line of fan delete kits that replace everything needed to get rid of your fan and fan clutch, without causing cooling issues as a result. This basic kit is the cheapest option, including just the bare essentials to get the job done and get your car running without a fan.

    This kit is best for someone who has already upgraded their thermostat housing and/or water pump pulley and has performed regular maintenance on their engine drive belts.

    Included in this kit:

    • 80* thermostat
    • 1 liter of coolant
    • Water Wetter coolant additive
    • Low-temperature coolant temperature sensor/switch

    Fits the following BMWs:
    09/1995-1999 E36 BMW 323is/ic 328i/is/ic M3

    **This kit is intended to be used with cars that have a functional auxiliary fan (64508364093) or an upgraded electrical fan installed.**

    Packaged by Turner
    Part #: FD1Aft95KT
    Price: $69.95 (USD) 
    In Stock
    Free Shipping Free Shipping
    on orders $99 and up
    Quantity:   
    Coolant Expansion Tank - E36/E39/Z3 6 cylinder 1992-1998 This high quality BEHR brand expansion tank is used on M50, M52, S50 and S52 engines, and is a common failure item on all E36 3 series with 6 cylinder engines (325/328/323 and M3) 1992-1999, Z3 with 2.8 liter, MZ3 Roadster/Coupe (S52), and E39 528i from 1997-1998. BEHR was the original equipment supplier to BMW, so you know the BEHR made expansion tank will be the highest quality available. Be leary of competitors selling this part for less -- is it a BEHR? Probably not. We only carry the BEHR brand expansion tank as it is the only one we use in our own BMWs.

    If you are overhauling your coolant system, now is the time to consider preventative replacing this expansion tank. These are known to go bad, causing a leak which can leave you stranded. We have found that the expansion tanks should be replaced based on age as well as condition. Expansion tanks seem to have a lifespan of less than six years before they show signs of fatigue and wear. Pre-emptively replacing the expansion tank as part of an overall maintenance plan can prevent you from getting stranded from a sudden failure later on.

    Need a new coolant level sensor too? If your coolant level sender is bad, your on board computer will constantly display a "low coolant" message (unless your coolant is actually low...). If you're replacing your expansion tank, now is a great time to replace this failure prone sensor. If you want a new coolant level sensor, simply choose from the option below. Because there are different sensors for different year/model BMWs, please be as specific as possible when you give us your car info during checkout (model, year, production date). Thanks!


    This item fits the following BMWs:
    1992-1998 E36 BMW 323ic 325i 325is 325ic 328i 328is 328ic M3
    1997-1998 E39 BMW 528i
    1997-1998 Z3 BMW Z3 2.8
    1998-2000 Z3 BMW M Roadster M Coupe (S52)
    Packaged by Turner
    Part #: 17111723520
    Price: $32.62 (USD) 
    $102.75 (Sale - Save 68%)
    In Stock
    Free Shipping Free Shipping
    on orders $99 and up
    MZ3 S54 OEM Behr Radiator (Upgraded Thicker Core Radiator for E36) Upgrade the cooling capacity of your E36 323i, 325i, 328i, M3 with the MZ3 S54 radiator. This thicker core radiator - 42mm core vs the stock 34mm core - is an economical way to increase the cooling capacity from the stock unit in your M20, M50, S50 or S52 equipped 3 series. The thicker core radiator has greater surface area for air to flow over, giving additional cooling capacity over the original radiator. This makes it an excellent choice for track cars that need a little extra cooling capacity. Or for supercharged engines where underhood temps can lead to heat soak in the engine compartment. This radiator also has hangers on the bottom that can fit a Euro oil cooler (cooler brackets still required).

    Hailing from Stuttgart, Mahle-Behr specializes in automotive cooling systems. From air conditioning to engine cooling M-B has you covered with OE-quality replacement parts.

    This item fits the following BMWs:
    1992-1998 E36 BMW 323is 323ic 325i 325is 325ic 328i 328is 328ic M3 with Manual Transmission
    2001-2002 Z3 BMW Z3 M Roadster M Coupe
    Mahle-Behr
    Part #: 17112227281
    Price: $171.46 (USD) 
    In Stock
    Quantity:   
    E36 Aluminum Radiator Upgrade The cooling system may be the E36's biggest letdown. Many plastic components in the system were not manufactured for longevity, especially when used in racing/track environments. Two areas of the stock radiator that are prone to failure are the plastic end-tanks and the plastic necks for the upper and lower hoses. The plastic will become brittle and crack. The solution is to use more durable materials such as aluminum or composites. This all aluminum radiator sourced from Asia, is an economic alternative to the premium pieces from PWR and Fluidyne while still addressing the stock radiator's plastic shortcomings. We have tried this radiator in some of our E36 track cars and found it fits like the stock OEM using the original mounting hardware and ability to use the stock shroud. It's the same thickness and surface area as the original radiator so there won't be any change in coolant volume and we don't expect it to lower coolant temps. But if you're installing the OEM plastic version over and over, this may be the perfect alternative at a low cost.

    Note: this radiator does not have the tabs for fitting the factory Euro oil cooler

    This item fits the following BMWs:
    1992-1999 E36 BMW 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
    Turner Motorsport
    Part #: 17111469179-ALU
    Price: $189.95 (USD) 
    In Stock
    Quantity: