click to Chat Live
Contact YouTube Blog Twitter facebook Turner Motorsport on Instagram
1-800-280-6966
 |   Login
  • 0
 |   Login
Shopping Cart (0) Wishlist
Contact

(0) item(s) in your Shopping Cart
Home
Categories
Specials Gifts & Clothing
  1. Genuine BMW Accessories
  2. Genuine BMW Clothing
  3. Turner Shirts Hats and Gear
  4. Gifts under $25
  5. Gifts under $50
  6. Gifts under $100
  7. Gifts over $100
  8. Gift Certificates
  9. Stocking Stuffers
  10. Gift Packages
Brakes
  1. Brake Overhaul Packages
  2. Brake Pads
  3. Brake Pad Sensors
  4. Brake Rotors
  5. StopTech Big Brake Kits
  6. Brembo Big Brake Kits
  7. Stainless Steel Brake Lines
  8. Brake Fluid
  9. Brake Calipers
  10. Caliper Rebuild Kits
  11. Parking Brake Parts
  12. Brake Master Cylinders
  13. ABS/DSC System Parts
  14. Brake Cooling Ducts & Backing Plates
  15. Brake Pads - Brembo GT BBK Calipers
  16. Brake Pads - StopTech BBK Calipers
Car Care & Accessories
  1. Car Covers
  2. Wheel & Tire Cleaning
  3. Wax, Polish and Cleaning Supplies
  4. Detailing Gear
  5. Leather & Plastic Care
  6. Car Cleaning Supplies
  7. Chassis Paint, Coatings, Sealants, and Rust Conversion
Drivetrain
  1. Differential and Gearing Upgrades
  2. Differential Mounts and Upgrades
  3. OEM Clutch Kits & Clutch Parts
  4. Performance Clutch Kits & Parts
  5. Lightweight Aluminum Flywheel Upgrades
  6. Stock OEM Dual Mass Flywheels
  7. Stainless Steel Clutch Lines
  8. Clutch Parts
  9. UUC Short Shift Kits
  10. Axle Shafts
  11. Driveshafts
  12. B&M Short Shifters
  13. Performance Short Shift Kits
  14. UUC DSSR - Double Sheer Selector Rod
  15. Drivershaft Center Support Bearings
  16. Flex Discs & Guibos
  17. Transmission Mounts
  18. Transmission Parts
Engine Chips
  1. Performance Chips, 1986-1995 Models
  2. Shark Injector Performance Software, 1996-2005 Models
Engine Parts
  1. Engine Performance Packages
  2. Cam Sprockets & Gears
  3. Water Pumps
  4. Thermostats
  5. Radiators & Cooling System Overhaul Kits
  6. Oil Pan Baffles
  7. Radiator Hoses, Cooling Hoses, & Hose Sets
  8. Engine Fans & Fan Clutches
  9. Underdrive Power Pulleys
  10. Camshafts
  11. Schrick Performance Camshafts
  12. External Engine Parts
  13. Drive Belts & V-Belts
  14. Gaskets, Gasket Sets, Seals, & O-Rings
  15. Crankcase Vent, PCV, and Oil Separator Systems
  16. Motor Mounts
  17. Electrical Sensors, Switches, & Relays
  18. Ignition Parts
  19. Alternator & Alternator Parts
  20. Starter Motors & Starter Parts
  21. Fuel System Parts
  22. Internal Engine Parts
  23. Cylinder Head Parts & Head Bolts
  24. VANOS Units & Parts
  25. Rod Bearing Kits
  26. Oil Coolers & Oil Cooler Parts
Exhaust
  1. Supersprint Performance Exhaust Systems
  2. Performance Headers & Downpipes
  3. Turner Motorsport Performance Exhaust
  4. Borla Performance Exhaust Systems
  5. Corsa Performance Exhaust Systems
  6. Dinan Free Flow Exhaust Systems
  7. Exhaust System Upgrades
  8. Oxygen Sensor - O2 Sensors
  9. Exhaust Gaskets Hangers and Parts
Exterior / Body
  1. Black Grills
  2. Chrome Grills & Trim
  3. Emblems & Decals for Hood, Trunk, and Wheels
  4. Front Spoilers, Bumper Covers, & Air Dams
  5. Rear Spoilers, Rear Wings, & Aprons
  6. Body Trim Parts & Accessories
  7. Hood & Trunk Shocks, Struts
  8. License Plate Brackets & License Plate Frames
  9. Mirror Kits & Mirror Parts
  10. Window Regulators & Motors
  11. Wiper Blades, Wiper Pumps, & Wiper Motor Parts
  12. Hood Pins and AeroCatch Latches
  13. Racing Tow Hooks and Tow Straps
  14. Aero & Body Kits
Intake
  1. aFe Cold-Air Intake Kits
  2. Turbos & Active Autowerke Superchargers
  3. Dinan Cold Air Intake Kits
  4. Performance Intake Kits
  5. aFe Performance Air Filters
  6. K&N Performance Air Filters
  7. Replacement Cone Air Filters (for Cold Air Intakes)
  8. Intake Cleaning & Recharging Kits
  9. Intake Manifold Upgrades
  10. Intake Manifold Components (DISA, Vacuum, CCV, Etc)
  11. BOV, Chargepipe, and Intercooler Upgrade Kits
  12. Mass Air Sensor & Air Flow Meters
  13. Intake Boots & Hoses
  14. Throttle Body Parts
Interior
  1. Floor Mats
  2. Gauge Kits and Data Acquisition
  3. Auxiliary Input Adaptors for BMW
  4. Pedal Sets
  5. Escort Radar Detectors
  6. Racing Steering Wheels
  7. Shift Knobs, Shift Boots, & Shift Handles
  8. Seats & Seat Accessories
  9. Seat Belts and Racing Harnesses
  10. Cup Holders and Storage
  11. Door Sill Strips
  12. Heating & Air Conditioning
  13. Interior Switches and Switchgear
  14. Sunshades & Windscreens
  15. Interior Trim & Accessories
Lighting
  1. Euro Clear Turn Signals, Parking Lights, & Tail Lights
  2. Turn Signals / Parking Lights
  3. Bulbs for Headlights, Turn Signals and Tail Lights
  4. Headlights, Headlight Lenses, & Headlight Parts
  5. Fog Lights, Fog Light Lenses, & Fog Light Parts
  6. Tail Lights
  7. Stealth Bulbs
Maintenance
  1. Routine Maintenance & Tune-Up Packages
  2. Oil Filters & Oil Filter Kits
  3. Air Filters
  4. Fuel Filters
  5. Cabin Air Filters, Heppa Filters, & Microfilters
  6. Transmission Filter Kits & Transmission Service Parts
  7. Ignition Coils
  8. Spark Plugs
  9. Bentley Repair / Service Manuals
  10. Service Reset Tools & Fault Code Readers
  11. Anti-Freeze and Coolant
  12. Engine Oils - Genuine BMW and OEM
  13. Power Steering and Hydraulic Fluids
  14. Transmission and Gear Oil - Genuine BMW and OEM
  15. MOTUL Engine Oil and Gear Lubricants
  16. Red Line Oil & Fluids
  17. Liqui-Moly Oil and Additives
Suspension
  1. Shocks & Struts
  2. H&R Performance Springs
  3. Dinan Performance Springs
  4. Spring & Shock Packages
  5. Turner / H&R Height Adjustable Spring Sets
  6. Bilstein PSS PSS9 PSS10 Coil Over Suspensions
  7. H&R Coil Over Suspensions
  8. KW Coil Over Suspensions
  9. Moton Coil Overs & Race Shocks
  10. ST Suspension Coilover Kits
  11. Turner Motorsport Racing Suspension Kits
  12. TC Kline Racing Coil Overs
  13. Chassis Reinforcement Kits & Parts
  14. Sway Bar Kits
  15. Sway Bar Links & Sway Bar Parts
  16. Camber / Caster Kits
  17. Strut Braces & Stress Bars
  18. Control Arm Replacements & Upgrades
  19. Suspension Bushings & Mounts
  20. Wheel Bearings & Hub Assemblies
  21. Steering Racks & Power Steering Pumps
  22. Tie Rods & Steering Parts
  23. Coil Over Spring Hardware
  24. CATuned Coilover Kits
  25. AST Suspension
Wheels
  1. Apex Flow Formed Alloy Wheels
  2. Forgeline Custom Forged Alloy Wheels
  3. HRE FlowForm Performance Alloy Wheels
  4. D Force Flow Formed Alloy Wheels
  5. Alpina Alloy Wheels
  6. Original BMW Wheels and Wheel Upgrades
  7. Turner Motorsport Wheel Spacers
  8. ECS Tuning Wheel Spacers
  9. H&R Wheel Spacers
  10. Wheel Bolts, Wheel Studs and Nuts
  11. Wheel Emblems, Caps, and Accessories
Tools
  1. Alignment Tools
  2. Battery Chargers and Tenders
  3. Brake Tools
  4. Clutch Alignment Tools
  5. Coil Over Wrenches
  6. Cooling System Tools
  7. Cylinder Head and VANOS Tools
  8. Exhaust Tools
  9. Fan and Fan Clutch Tools
  10. Fault Code Readers and OBD Scan Tools
  11. Fuel System Tools
  12. Genuine BMW Tool Kits
  13. Oil Service Tools
  14. Sockets
  15. Spark Plug Sockets
  16. Transmission and Differential Tools
  17. Wheel Pin Tools
  18. Workshop Chemicals
Clearance
Choose BMW
BMW 1 Series
  1. (E82) 1-series Coupe 2008+
  2. (E88) 1-series Convertible 2008+
BMW 2 Series
  1. (F22) 2-Series Coupe 2014+
  2. (F23) 2-Series Convertible 2014+
  3. (F87) M2 2016+
BMW 3 Series
  1. (E21) 3-Series 1977-1983
  2. (E30) 3-series 1984-1991
  3. (E30) M3 1988-1991
  4. (E36) 3-series 1992-1999
  5. (E36) M3 1995-1999
  6. (E46) 3-Series 1999-2005
  7. (E46) M3 2001-2006
  8. (E90) 3-Series Sedan 2006-2011
  9. (E90) M3 Sedan 2008-2013
  10. (E91) 3-Series Touring 2006-2013
  11. (E92) 3-Series Coupe 2007-2013
  12. (E92) M3 Coupe 2008-2013
  13. (E93) 3-Series Convertible 2007-2013
  14. (E93) M3 Convertible 2008-2013
  15. (F30) 3-Series Sedan 2012+
  16. (F31) 3-Series Touring 2014+
  17. (F80) M3 2015+
  18. (F34) 3-Series Gran Turismo 2014+
BMW 4 Series
  1. (F32) 4-Series Coupe 2014+
  2. (F33) 4-Series Convertible 2015+
  3. (F34) 4-Series Gran Turismo 2014+
  4. (F82) M4 Coupe 2015+
  5. (F83) M4 Convertible 2015+
  6. (F36) 4-Series Gran Coupe 2015+
BMW 5 Series
  1. (E34) M5 1991-1993
  2. (E39) M5 2000-2003
  3. (E60) M5 2006-2010
  4. (E28) 5-Series 1982-1988
  5. (E34) 5-Series 1989-1995
  6. (E39) 5-Series 1996-2003
  7. (E60) 5-Series Sedan 2004-2010
  8. (E61) 5-Series Touring 2006-2010
  9. (F10) 5-Series 2011+
  10. (G30) 5-Series 2017+
BMW 6 Series
  1. (E24) 6-Series 1977-1989
  2. (E63) 6-Series Coupe 2004-2010
  3. (E64) 6-Series Convertible 2004-2010
  4. (F06) 6-Series Gran Coupe 2013+
  5. (F12) 6-Series Coupe 2011+
  6. (F13) 6-Series Convertible 2011+
BMW 7 Series
  1. (E32) 7-Series 1988-1994
  2. (E38) 7-Series 1995-2001
  3. (E65) 7-Series SWB 2002-2007
  4. (E66) 7-Series LWB 2002-2007
  5. (F01) 7-Series SWB 2009+
  6. (F02) 7-Series LWB 2009+
BMW 8 Series BMW Classics (E9, Bavaria, Isetta, etc)
  1. 2500
  2. 2800
  3. 3.0Si
  4. Bavaria
  5. 2800CS
  6. 3.0CS
  7. 2002
  8. 2002tii
  9. (E12) 528i 1977-1981
  10. (E12) 530i 1975-1978
BMW X Series (SAV)
  1. (E84) X1 Series 2013+
  2. (E83) X3 2004-2010
  3. (F25) X3 2011+
  4. (F26) X4 2015+
  5. (E53) X5 2000-2006
  6. (E70) X5 2007-2013
  7. (F15) X5 2014+
  8. (F85) X5 M 2015+
  9. (E71) X6 2008+
  10. (F16) X6 2015+
  11. (F86) X6 M 2015+
  12. (F48) X1 2016+
  13. (F48) X1 (2016+)
BMW Z Series
  1. (E36/7) Z3 1997-2002
  2. (E85) Z4 M Roadster
  3. (E85/E86/E89) Z4 2003+
  4. (E86) Z4 M Coupe
  5. (E52) Z8 2000-2003
BMW 1600-2002 / tii BMW i Series
  1. (I01) BMW i3 2014+
  2. (I12) BMW i8 2014+
MINI Cooper and Cooper S
Racing
Racing Home Racing News Racing Schedule Racing Photo Gallery
Gallery
Photo Gallery Wallpaper Project Cars
  1. Project i8
  2. Project F80 M3
  3. Turner F82 M4
  4. Turner X5 M
  5. Turner F22 2 Series
  6. Turner F13 M6
  7. Turner F10 M5
  8. Turner F30 335i
  9. Turner E9X M3
  10. Turner E92 335i
  11. Turner E82 1 Series
  12. Turner ActiveE (100% Electric)
  13. Turner E46 M3
  14. Turner E46 330i ZHP
  15. Turner E36 M3
  16. Turner E30 M3
  17. Turner MINI Cooper S
  18. McLaren F1
  19. Turner E92 M3 Lime Rock
  20. Turner F80 M3 Silverstone
Video Gallery
Projects
Turner BMW i8 Turner BMW F80 M3 Turner BMW F82 M4 Turner BMW X5 M Turner BMW F22 2 Series Turner BMW F13 M6 Turner BMW F10 M5 Turner BMW F30 335i Turner BMW E9X M3 Turner BMW E92 335i Turner BMW E82 1 Series Turner BMW ActiveE (100% Electric) Turner BMW E46 M3 Turner BMW E46 330i ZHP Turner BMW E36 M3 Turner BMW E30 M3 Turner MINI Cooper S McLaren F1 Turner BMW E92 M3 Lime Rock Turner BMW F80 M3 Silverstone
About Us
About Turner Motorsport Customer Feedback The Turner Team
  1. Open Positions
Returns Policy Shipping Info Contact Us Privacy Policy Security Policy FAQs

BMW E36 M3 Suspension Bushings & Mounts

BMW E36 M3 Suspension Bushings & Mounts Suspension mounts are designed to absorb the energy of the shocks and springs and isolate road harshness from the chassis. But over time the original rubber mounts will crumble and fail. We have stock mounts and bushings as well as a wide selection of upgraded and heavier-duty for performance street cars. We also offer a full selection of race only bushings and mounts. Simply choose your car below. Included here you will find rear shock tower mounts, front strut mounts, subframe mounts, lower control arm bushings, rear trailing arm bushings, and more.
You're currently viewing parts for your (E36) M3 1995-1999. Reset your chassis
For accurate results, specify your model below.
Dinan Performance Rear Trailing Arm Monoball Kit - E36 E46 Z4

The rear trailing arm bushings take a lot of abuse from accelerating, braking and cornering. The stock rubber bushings are just not up to the task of keeping rear wheel alignment in spec for very long, especially if you have upgraded to stickier tires and a better suspension. The pliable rubber flexes and twists which slows down reaction time and leaves you with a car that feels nervous and 'tail happy'. Urethane helps to control the alignment but issues with fitment, maintenance, and longevity keep us from recommending urethane on anything but a street car.

The Monoball bushings from Dinan are the perfect option for heavy tack use and extended longevity. These don't allow nearly the same amount of deflection as other bushing styles and give your a significantly tighter feel in the rear of the vehicle when driving aggressively.

Benefits:

  • Improved Steering Responsiveness
  • Reduces Brake Shimmy
  • Nylon-lined Bearings for Quiet Operation
  • Machined Aluminum Housings+ Sealed Bearings

For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere.

Dinan
Part #: D280-0011
Price: $514.00 (USD) 
Quantity:   
Rear Spring Pad - priced each - 15mm BMW used three different spring pads in the E36 E46 3 series, each a different thickness, the thinnest being only 5mm. If they chose to use the thinnest pad on your car, you may end up with a ride height in the rear a little lower than you expected when lowering you car with sport springs. If this is the case, we suggest using these 15mm rear spring pads. These mount on TOP of the rear spring in the E36 and either top or bottom on the E46 or E85 Z4

This item fits the following BMWs:
1992-1998 E36 BMW 318i 318is 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3 - Top only
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
2003-2008 Z4 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
Genuine BMW
Part #: 33531094754
Price: $28.45 (USD) 
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Rear Subframe Bushings/Mounts - Aft/Rear Pair - E36 M3 (Upgrade for E36 non-M) (Pair) On 1992-1999 E36 chassis 3 series, the subframe mounts are known to suffer failures, particularly after many miles and/or harsher driving conditions. When subframe bushings fail, it wreaks havoc with your BMW's suspension alignment and geometry.

There are four bushings/mounts connecting the subframe to the chassis. These are the aft (rear) pair of bushings (stock) for the 1995-1999 M3 (E36), but can also be used on all 1992-1999 3 series (E36 chassis) BMW's as an upgrade over the stock subframe mounts. **We highly recommend also getting the fore (front) pair of rear subframe bushings as well. These are available seperately (pn# 33319059301), or they can be combined with these (simply select that you also want the forward-most pair as well on the drop-down box below).

Looking for an upgrade on a non-M E36? The slightly firmer rubber is more durable than the stock non-M subframe mounts, and as such we highly recommend these bushings for all E36 chassis 318i, 318is, 325i, 325is, 323is, 328i, and 328is.

These mounts are sold as a pair, so two are included for this price.
Genuine BMW
Part #: 33319059301
Price: $121.14 (USD) 
$142.52 (Sale - Save 15%)
Free Shipping Free Shipping
on orders $199 and up
Rear Shock Mounts (RSM) - Turner Motorsport Race Monoball - E30, E36, E46, Z3, Z4 (Pair) Made in the USA Want the Ultimate design in a rear shock tower mount? You've found it. These rear shock mounts are designed for use on the track and racing. This set of mounts will help your rear shocks perform the best they can in those conditions. The advantage to using a mount with spherical bearing is that it allows the shock to freely move off axis without side loading the shock shaft like rubber or polyurethane mounts do. Side loading a shock increases stiction and wear which decreases its efficiency. Because these are mounts without an isolator (rubber or polyurethane) to dampen road noise and vibrations we do not recommend them for street cars. These were designed in-house and developed for our own track and race cars.

These TMS bearing mounts include both 10mm and 12mm stainless steel bearing sleeves to work with a wide variety of shock shaft pins. The pin is the upper-most portion of the shock where it passes through the mount. If you need a bearing sleeve size other then 10mm or 12mm please contact us.

These rear shock tower mounts fit the following BMWs:
1984-1991 E30 3 series (all) incl. 318i, 318is, 325, 325e, 325es, 325i, 325is
1992-1998 E36 3 series (all) incl. 318i, 318is, 318ti, 325i, 325is, 328i, 328is, 323is
1999-2005 E46 3 series (all) incl. 323i, 323Ci, 325i, 325Ci, 328i, 328Ci, 330i, 330Ci
1988-1991 E30 M3 (all)
1995-1999 E36 M3 coupe, sedan & convertible
2001-2006 E46 M3 (all) incl. coupe & convertible
1996-2002 Z3 Roadster/Coupe including "M"
2003-2008 Z4 Roadster/Coupe including "M"
Turner Motorsport
Part #: TSU9906SM1
Price: $144.46 (USD) 
$169.95 (Sale - Save 15%)
Free Shipping Free Shipping
Quantity:   
E36 Rear Suspension Bushing Overhaul Package

This package allows you to build your own rear bushing package to cover the parts you want to replace. As these cars age, they require a number of suspension bushings to be replaced. Bushing replacement not only keeps the car in its top form, it also makes the car safer. Depending on the work, it may be logical to replace all of the bushings in the rear suspension (there are 19 total). This is especially true if you are pulling the subframe out to do the floor reinforcement or if you're doing a diff install. Turner Motorsport is a big believer in using rubber bushings for street cars (with the exception of solid subframe mounts, see further below). Urethanes, Delrin, or aluminum are generally good for reducing compliance and limiting deflection - attributes that don't really work well on roads filled with potholes, railroad crossings, cracks, and expansion joints. The rubber bushings maintain the factory ride/handling traits that won the E36 praise all over the world. Every bushing will need maintenance or replacement at some point and rubber has proven to last the longest and need less maintenance than anything else, even urethane. And unless competitive driving is your goal, the harder materials are only a gimmick.

Any major overhaul of the rear suspension should include new subframe mounts. The worn rubber mounts contribute to rear subframe-floor failure when the deflection in the mount is transferred to the chassis. Rubber mounts are only OK for street cars that don't see aggressive driving, autocross, or track use. For any enthusiastic driving, we strongly recommend our solid aluminum subframe mounts even on the street. They have zero deflection and will not contribute to rear floor failures. And if you leave rubber in the rest of the suspension your ride comfort will not suffer.

Individual Item Descriptions:

  • Trailing Arm Bushings and Limiters (33322228153 and TSU9990001) - our OEM rubber replacement trailing arm bushings (RTABs) are a perfect fit and help maintain rear toe alignment. The Limiters prevent premature bushing wear.
  • Rear Inner Control Arm Bushings (upper 33321092247 and lower 33326770824) - new stock inner rubber bushings for the upper spring arm and the lower camber arm. These do not wear out very quickly but should be replaced as a 'While you're in there...' job.
  • Rear Outer Control Arm Bushings (upper and lower) (33326775551) - new stock outer ball joints for the upper spring arm and the lower camber arm. These are the standard ball joint design and last a very long time. Check for play with a pry bar and replace as needed.
  • Rear Shock Mounts - Choose from several types of RSM upgrades. If your mounts have not been replaced in the last 40,000 miles, now is the perfect time. Skip this option if you recently replaced mounts or already have an upgraded mount.
  • Differential mounts (33171134871 and 33171134872) - Now is a great time to replace the rubber-isolated mounts. This is another low-wear mount but it can be changed easily, and is a low cost item. Solid diff mounts are streetable with only a minimal increase in NVH.
  • Rear subframe mounts (33319059301 and 33319066671) - The heart of the rear suspension, the subframe (or carrier) mounts located the entire rear suspension to the car. There are four mounts in total and bolt up into the rear floor. Worn subframe mounts are one of the leading contributors to rear floor-subframe failure. As the mounts flex, so does the sheetmetal of the chassis, which will fatigue the sheetmetal and crack the spot welds. Therefore, replacement of the subframe mounts is critical and a must when doing the subframe reinforcement or repair. Solid aluminum mounts are streetable with no increase in NVH.

 

This item fits the following BMWs:
1992-1999 E36 BMW 318i 318is 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3

Packaged by Turner
Part #: E36REARBUSHING
Price: $347.23 (USD) 
Free Shipping Free Shipping
Genuine BMW Washer-Gasket - 33526772864 - E30,E36,E46,E85

OE gasket ring for the BMW rear suspension mount.


Genuine BMW Washer-Gasket
This item fits the following BMW Chassis:
E30 M3,E36 M3,E46 M3,E85 Z4M,E30,E36,E46,E85 Z4,E86 Z4
 

 

Genuine BMW
Part #: 33526772864
Price: $3.80 (USD) 
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Rear Shock Mounts (RSM) - Heavy-Duty - E30, E36, E46, Z3, Z4 (Single) This is a BMW shock mount, originally used on the E30 convertible models. Why E30? Because we have tried them all and the E30 cabrio mounts seem to hold up the best. However, all OEM rubber shock mounts will fail - it's just a matter of time. They'll even fail with a stock suspension but even quicker with modified suspensions. These E30 mounts are a little better than the originals. For even greater strength upgrade to the 'Repair Shop' or the aluminum mounts. Priced per mount.
Genuine BMW
Part #: 33521132104
Price: $35.36 (USD) 
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
OEM Lemforder Rear Trailing Arm Bushing - E36 E46 E83 X3

Bushings tends to wear over time and split or even break free from the internal sleeve, causing excessive movement and sloppy control feel. OEM Lemförder bushings are the perfect option to restore suspension back to day 1 quality.

OEM Lemförder is an engineering company that focuses on high-quality, precision manufacturing of critical suspension and steering components. Providing exceptionally high quality parts directly to BMW, as well as 50+ other big name automotive companies, such as Mercedes and Audi, their history of reliability and variety of offered parts makes them one of the biggest names for a go-to OEM parts provider. Lemförder parts place an important emphasis on design, production, and assembly, ensuring maximum reliability. They even coat all parts possible with corrosion protection for extended longevity.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Lemforder
Part #: 33326770786
Price: $12.95 (USD) 
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Rear Control Arm Upper Inner Bushing - Turner Race Monoball - E36/E46/X3/Z4 Made in the USA TMS rear subframe bearings are designed to limit rear control arm movement relative to the subframe. The stock BMW subframe bushings are made out of rubber, which allows variance in suspension position due to deformation and compression. A race car needs to have all suspension points remain in place for proper setup. By using high grade aircraft aluminum alloy and high performance race bearings, the TMS bushing replacements are both lightweight and strong. The casing is designed so that if maximum motion occurs, the load will be evenly distributed throughout the casing. Our flanges are designed to spread the load on the subframe and limit movement. The bearing we use is an extra wide race bearing to distribute the load over a broader area. Each piece is anodized or nickel plated to withstand corrosion. These bushings are a perfect compliment to the TMS lower camber arms.

Click here for installation instructions.

Turner Motorsport
Part #: TSU9980006
Price: $140.21 (USD) 
$164.95 (Sale - Save 15%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
OEM Lemforder Rear Control Arm Bushing - E28 E46 E83 Z4

Bushings tends to wear over time and split or even break free from the internal sleeve, causing excessive movement and sloppy control feel. OEM Lemförder bushings are the perfect option to restore suspension back to day 1 quality.

OEM Lemförder is an engineering company that focuses on high-quality, precision manufacturing of critical suspension and steering components. Providing exceptionally high quality parts directly to BMW, as well as 50+ other big name automotive companies, such as Mercedes and Audi, their history of reliability and variety of offered parts makes them one of the biggest names for a go-to OEM parts provider. Lemförder parts place an important emphasis on design, production, and assembly, ensuring maximum reliability. They even coat all parts possible with corrosion protection for extended longevity.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Lemforder
Part #: 33326771828
Price: $13.95 (USD) 
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Lemforder Rear Trailing Arm Bushings (RTAB) - OEM Rubber - E36, E46, Z4 (Pair) If you're experiencing a "loose" feeling when going around corners, these are the likely culprit. The rear bushings on these cars will wear out just like any other bushing. When this happens, the rear toe (the angle that the tire points in or out) will vary under load. These M3 bushings are more durable than the stock bushings and hold up better than the original bushings. These rear trailing arm bushings (often referred to as RTAB) are listed as the replacement to BMW part numbers  33322228153  and  33-32-2-228-153 .

This is the most up to date version of this bushing from Lemfoerder. We recommend professional installation as these now require special tools for installation.

This item fits the following BMWs:
1992-1998  E36 BMW  318i 318is 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005  E46 BMW  323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
2004-2010  E83 BMW  X3 2.5i X3 3.0i X3 3.0si
2003-2008  Z4 BMW  Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
Lemforder
Part #: 33326770817gKT1
Price: $47.90 (USD) 
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Rear Shock Mounts (RSM) - Repair Shop Lifetime Warranty - E30, E36, E46, Z3, Z4 (Pair) The rear mounts in BMW 3 series fail, no matter what year from 1983 to present, that is a weak point of the suspension. Here's the solution. The 3 Series "Repair Shop" Rear Shock Mounts carry a lifetime warranty and will last as long as you own your car. Expect the same comfortable ride you have with factory mounts. These are an inexpensive alternative to expensive factory mounts.

Make this complete by adding the mount gasket and nuts (add the option below).
Turner Motorsport
Part #: JRDRP
Price: $39.90 (USD) 
Free Shipping Free Shipping
on orders $199 and up
OEM Lemforder Rear Axle Shock Mount - E36 E46 Z3

Strut mounts can begin to wear and fail over time, causing a knock in the suspension to occur. Replace yours with a high quality OEM Lemförder replacement to ensure a tight, noise-free ride.

OEM Lemförder is an engineering company that focuses on high-quality, precision manufacturing of critical suspension and steering components. Providing exceptionally high quality parts directly to BMW, as well as 50+ other big name automotive companies, such as Mercedes and Audi, their history of reliability and variety of offered parts makes them one of the biggest names for a go-to OEM parts provider. Lemförder parts place an important emphasis on design, production, and assembly, ensuring maximum reliability. They even coat all parts possible with corrosion protection for extended longevity.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Lemforder
Part #: 33521092362
Price: $13.95 (USD) 
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Rear Subframe Bushings/Mounts - Fore/Front Pair - E36 M3 (Upgrade for E36 non-M) (Pair) On 1992-1999 E36 chassis 3 series, the subframe mounts are known to suffer failures, particularly after many miles and/or harsher driving conditions. When subframe bushings fail, it wreaks havoc with your BMW's suspension alignment and geometry.

There are four bushings/mounts connecting the subframe to the chassis. These are the fore (front) pair of bushings (stock) for the 1995-1999 M3 (E36), but can also be used on all 1992-1999 3 series (E36 chassis) BMW's as an upgrade over the stock subframe mounts. **We highly recommend also getting the aft (rear) pair of rear subframe bushings as well. These are available seperately (pn# 33319059301), or they can be combined with these (simply select that you also want the rear-most pair as well on the drop-down box below).

Looking for an upgrade on a non-M E36? The slightly firmer rubber is more durable than the stock non-M subframe mounts, and as such we highly recommend these bushings for all E36 chassis 318i, 318is, 325i, 325is, 323is, 328i, and 328is.

These mounts are sold as a pair, so two are included for this price.
Genuine BMW
Part #: 33319066671
Price: $74.95 (USD) 
Free Shipping Free Shipping
on orders $199 and up
Front Control Arm Bracket Kit - E30, E36, Z3 Control arm bushing brackets do not typically wear or fatigue. But we sell replacement brackets as a convenience to go with new bushings (press one bushing instead of pressing out the old). For racers it's a great idea to keep a spare set of bushings with brackets on hand since pressing bushings at a racetrack is not ideal. Keep a spare set to avoid hassle and downtime.
Packaged by Turner
Part #: tsu9995pb3KT
Price: $91.50 (USD) 
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Front Control Arm Bushings (FCAB) - Offset Rubber - E30, E36, Z3 (Pair) Anytime that you replace your front control arms (which should be often), you must replace your control arm bushings. The reason is because it's hard to tell if you're bushings are really bad and they are often destroyed when removed. These bushings have the hole off-center to give your car a little more track, caster, and camber. They are a solid rubber bushing that is great for the street. These came as standard equipment on E30 M3s (8/89-later) and 1995 E36 M3s.

For convenience, we carry the steel bushing carrier brackets (part# TSU9995PB3) with new hardware which will save you downtime caused by pressing out the old bushings and pressing in the new bushings.

This item fits the following BMWs:
1984-1991 E30 BMW 318i 318is 318ic 325e 325es 325i 325ic 325is M3
1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
Packaged by Turner
Part #: 31129064875
Price: $103.27 (USD) 
$121.49 (Sale - Save 15%)
Free Shipping Free Shipping
on orders $199 and up
Rear Subframe Bushings/Mounts - Fore/Front Pair - E36 M3 (Upgrade for E36 non-M) (Pair) On 1992-1999 E36 chassis 3 series, the subframe mounts are known to suffer failures, particularly after many miles and/or harsher driving conditions. When subframe bushings fail, it wreaks havoc with your BMW's suspension alignment and geometry.

There are four bushings/mounts connecting the subframe to the chassis. These are the fore (front) pair of bushings (stock) for the 1995-1999 M3 (E36), but can also be used on all 1992-1999 3 series (E36 chassis) BMW's as an upgrade over the stock subframe mounts. **We highly recommend also getting the aft (rear) pair of rear subframe bushings as well. These are available seperately (pn# 33319059301), or they can be combined with these (simply select that you also want the rear-most pair as well on the drop-down box below).

Looking for an upgrade on a non-M E36? The slightly firmer rubber is more durable than the stock non-M subframe mounts, and as such we highly recommend these bushings for all E36 chassis 318i, 318is, 325i, 325is, 323is, 328i, and 328is.

These mounts are sold as a pair, so two are included for this price.
Genuine BMW
Part #: 33319066671
Price: $74.95 (USD) 
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
E36, E46, Z4 Turner Motorsport Camber Arm Reinforcement Kit Made in the USA If you haven't already upgraded to Adjustable Camber Arms , your stock rear lower wishbones are letting your down. The stock rear camber arm/wishbone is designed to be flexible and weak. In an impact, it's designed to bend or even break to absorb energy and prevent damage to other more vital components. This is great on a regular street car. But on a track car, or heavily modified street car, these arms can bend just from cornering forces and that can introduce radical camber changes that will throw off the balance and handling of the car. This reinforcement solves all of that by tying the two sections of the arm together. This creates a single solid arm with minimal flex in the arm itself. We can't take credit for this innovation - BMW recognized the problem and did this on their factory Group N racecars. If you haven't made the jump to adjustable arms, or your racing class still requires the stock camber arm, then this kit is a must! Installation requires welding.

Click here for installation instructions

This item fits the following BMWs:
1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
Turner Motorsport
Part #: TSU9975002
Price: $29.71 (USD) 
$34.95 (Sale - Save 15%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
3-series Strut/Shock Mount Kit - E36 M3 95

This strut and shock mount package covers the front and rear rubber mounts and bushings commonly replaced during a strut and shock install. While you're installing new front struts and rear shocks these are easily installed - there's no additional labor and special tools are not required. Since these pieces are mostly rubber, they dry up and crack over time. Re-using them lead to problems with fitment or noise, and may have safety issues as well. These mounts and pads are the perfect complement to your new shocks to help restore your car's handling and performance. 

We sell the basic strut and shock mount package, which includes:

  • Front strut mounts (also known as guide support)
  • Front strut reinforcement plates (to prevent cracking and deforming of the front strut towers)
  • Front strut tower paper washer gaskets
  • Front and rear self-locking mounting nuts
  • Rear Lifetime Warranty 'Repair Shop' shock mounts
  • Rear shock mount reinforcements (to prevent cracking of shock towers)
  • Rear shock mount gaskets

In addition, you can add the front spring pads, front bump stops, front dust boots, rear bump stops, and rear dust boots if needed. But please note that some shocks and coil overs come with all or some of these pieces already. If in doubt, check with your supplier on what is included. 

We offer three varieties of the rear shock mounts - OEM, Repair Shop, and HP alum-rubber. We recommend either the Repair Shop or HP mounts because the stock OEM design has a flaw that can lead to premature failure of the mounts. The Repair Shop and HP mounts use a different design that will last longer and the Repair Shop mounts also have a lifetime warranty! 

This item fits the following BMWs:
1995 E36 BMW M3

Packaged by Turner
Part #: TMS11810DK
Price: $337.85 (USD) 
Free Shipping Free Shipping
3-series Strut/Shock Mount Kit - E36 M3 96-99 This strut and shock mount package covers the front and rear rubber mounts and bushings commonly replaced during a strut and shock install. While you're installing new front struts and rear shocks these are easily installed - there's no additional labor and special tools are not required. Since these pieces are mostly rubber, they dry up and crack over time. Re-using them lead to problems with fitment or noise, and may have safety issues as well. These mounts and pads are the perfect complement to your new shocks to help restore your car's handling and performance.

We sell the basic strut and shock mount package, which includes:
  • Front strut mounts (also known as guide support)
  • Front strut reinforcement plates (to prevent cracking and deforming of the front strut towers)
  • Front strut tower paper washer gaskets
  • Front and rear self-locking mounting nuts
  • Rear Lifetime Warranty 'Repair Shop' shock mounts
  • Rear shock mount reinforcements (to prevent cracking of shock towers)
  • Rear shock mount gaskets
    In addition, you can add the front spring pads, front bump stops, front dust boots, rear bump stops, and rear dust boots if needed. But please note that some shocks and coil overs come with all or some of these pieces already. If in doubt, check with your supplier on what is included.

    We offer three varieties of the rear shock mounts - OEM, Repair Shop, and HP alum-rubber. We recommend either the Repair Shop or HP mounts because the stock OEM design has a flaw that can lead to premature failure of the mounts. The Repair Shop and HP mounts use a different design that will last longer and the Repair Shop mounts also have a lifetime warranty!

    This item fits the following BMWs:
    1996-1999 E36 BMW M3
  • Turner Motorsport
    Part #: TMS338693
    Price: $252.65 (USD) 
    Free Shipping Free Shipping
    OEM Lemforder Front Upper Strut/Shock Mount - Left Side - E36 M3 96-99, MZ3

    The upper strut mount provides a locating point for the top of the front struts. It contains a rubber-isolated bearing that allows the strut shaft to move independently from the rest of the suspension - a critical component for the suspension to be quiet and effective. The rubber also absorbs vibrations and impact harshness, helping to keep unwanted noise and harshness from reaching the steering wheel.

    Price is per mount. This is the LEFT side (Driver's) mount.

    OEM Lemförder is an engineering company that focuses on high-quality, precision manufacturing of critical suspension and steering components. Providing exceptionally high quality parts directly to BMW, as well as 50+ other big name automotive companies, such as Mercedes and Audi, their history of reliability and variety of offered parts makes them one of the biggest names for a go-to OEM parts provider. Lemförder parts place an important emphasis on design, production, and assembly, ensuring maximum reliability. They even coat all parts possible with corrosion protection for extended longevity.

    As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!


    This item fits the following BMWs:
    1996-1999 E36 BMW M3
    1998-2002 Z3 BMW M Roadster M Coupe

    Lemforder
    Part #: 31332227897
    Price: $62.00 (USD) 
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Rear Shock Mount (RSM) - OEM Standard - E36, E36, E46, Z3, Z4 Single This are the factory standard rear shock mount used on E36 cars. They can also be used on all other E30, E46, Z3, and Z4 models, including M cars. These mounts are a low-cost replacement mount with the same original design as the stock mounts for your car. As a replacement mount they function the exact same as the originals. The original design has proven to be problematic in the past, especially on lowered cars or with cars that see a lot of track use. If you're modifying the suspension for stiffness or lowering, or plan to autocross or track your car we very strongly recommend a different shock mount ( such as the HP Aluminum/Rubber mounts, listed here ). Otherwise, these are a direct replacement for the stock mount, from a high quality OEM supplier, at a very attractive price.

    This item fits the following BMWs:
    1984-1991 E30 BMW 318i 318is 318ic 325e 325es 325i 325ic 325is 325ix M3
    1992-1999 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
    1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
    1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
    2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
    FEQ
    Part #: 33521137972
    Price: $14.95 (USD) 
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Rear Differential Mounts - Turner Solid - E36, E36 M3

    Changing out the stock rubber differential bushings for Delrin and aluminum will result in more feedback and better suspension performance. This kit will also help prevent the front diff bolt from loosening or shearing - a very common problem on E36 cars.

    The Turner Motorsport solid diff bushings have spent years being tested in various racing series and have even been used extensively on street cars. These bushings are CNC machined from high-grade billet aluminum and Delrin and are a direct replacement for the stock rubber pieces. The rear two differential cover bushings are slotted to allow for BMW manufacturing tolerances. The kit includes 3 pieces: a Delrin front mount and 2 aluminum rear mounts. A new front diff bolt is recommended - add it from the drop-down box below.

    This does NOT fit large case Evo M3 differentials.

    Clickhere for installation instructions.

    This item fits the following BMWs:
    1992-1998 E36 BMW 318i 318is 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
    **NOTE:Not for Euro Spec M3's (3.2 liter)**

    Turner Motorsport
    Part #: TDR3680001
    Price: $118.96 (USD) 
    $139.95 (Sale - Save 15%)
    Free Shipping Free Shipping
    on orders $199 and up
    Rear Trailing Arm Bushings (RTAB) - Delrin Race - E36, E46, Z4 (Pair) Made in the USA These Rear Trailing Arm Bushings (RTABs) are designed for specific racing classes where more solid or bearing-style bushings are not allowed. Delrin is a very hard plastic material with almost zero deflection and also lasts a lot longer than using any type of rubber or urethane bushing. Since there is less wasted motion with a solid bushing, the suspension can react faster and give you more feedback. The rear alignment stays in check during hard cornering, braking, and acceleration. You will corner faster and be able to get the power down earlier at corner exit with increased confidence.

    Delrin is a near solid bushing that does not absorb or dampen vibration or impact harshness. Therefore, we only recommend these for track-spec cars or street cars and drivers with more tolerance for noise, vibration, and harshness.

    These are a direct replacement for the factory bushings. Special installation tools are required but Delrin does not need long-term care or maintenance. Price is for the pair.

    This item fits the following BMWs:
    1992-1998 E36 BMW 318i 318is 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
    1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
    2001-2006 SpecE46 BMW 330i 330ci
    2003-2008 Z4 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
    TC Kline Racing
    Part #: 33322228153D
    Price: $169.95 (USD) 
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    E30, E36, E46, Z3, Z4 ECS Ultimate Performance Rear Shock Mount Kit (RSM)

    Want a race-spec rear shock mount but with the comfort of a factory bushing? This ECS rear shock mount combines the precision and articulation of a spherical bearing with the isolation of urethane bushings. The stainless monoball bearing is lined with PTFE lubricant and suspended in 80A urethane and housed in a hard anodized 6061-T6 aluminum mount. The spherical bearing is a better design than most rear shock mounts because it allows the shock to move and tilt without side-loading the shock shaft (which leads to premature failure of the shock). Most Genuine BMW and aftermarket shock mounts are not designed for shock angles and the stress that track or performance driving will put on the shock shaft. The ECS shock mount is properly designed to handle these loads. The internal bearing is also replaceable - it will be years before you have to replace the entire mount. The ECS mount is fully encapsulated to prevent the common shock mount failure of the stock mount design.

    ECS RSM features:

    • Maintenance free, PTFE lined, stainless steel monoball spherical bearing for full shaft articulation
    • 80A polyurethane isolation bushings for NVH control
    • Accommodates 10mm, 12mm, or 14mm damper shafts
    • Fully constrained shaft mount makes RSM blow out impossible
    • Hard anodized 6061-T6 construction
    • Fully rebuildable design

    * - the RSM comes with the BMW standard 10mm shock shaft bushings. 12mm is used on some performance shocks and 14mm is used on some true motorsport rear shocks.

    ECS
    Part #: 002542ECS01
    Price: $152.96 (USD) 
    $179.95 (Sale - Save 15%)
    Free Shipping Free Shipping
    on orders $199 and up
    E36 M3 Rear Subframe Mount Set (All 4 Mounts)

    Subframe mounts are the heart of the rear suspension. Everything is keyed off of these mounts that hold the rear subframe to the chassis. When these start to go bad the entire rear suspension moves. The flex in the bushings can also contribute to rear subframe floor cracks and failures so it's critical to stay on top of the wear and tear on these. Rubber bushings are great for street use but will not hold up to aggressive and track driving. If that kind of driving should have our solid aluminum mounts.

    These mounts are the stock E36 M3 subframe mounts and can be used as an upgrade on all non-M E36.

    This item fits the following BMWs:
    1992-1999 E36 BMW 318i 318is 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3

    Genuine BMW
    Part #: TMS300841
    Price: $150.90 (USD) 
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    3-series Strut/Shock Mount Kit - E36 M3 96-99

    This strut and shock mount package covers the front and rear rubber mounts and bushings commonly replaced during a strut and shock install. While you're installing new front struts and rear shocks these are easily installed - there's no additional labor and special tools are not required. Since these pieces are mostly rubber, they dry up and crack over time. Re-using them lead to problems with fitment or noise, and may have safety issues as well. These mounts and pads are the perfect complement to your new shocks to help restore your car's handling and performance.

    We sell the basic strut and shock mount package, which includes:

    • Front strut mounts (also known as guide support)
    • Front strut reinforcement plates (to prevent cracking and deforming of the front strut towers)
    • Front strut tower paper washer gaskets
    • Front and rear self-locking mounting nuts
    • Rear Lifetime Warranty 'Repair Shop' shock mounts
    • Rear shock mount reinforcements (to prevent cracking of shock towers)
    • Rear shock mount gaskets

    In addition, you can add the front spring pads, front bump stops, front dust boots, rear bump stops, and rear dust boots if needed. But please note that some shocks and coil overs come with all or some of these pieces already. If in doubt, check with your supplier on what is included.

    We offer three varieties of the rear shock mounts - OEM, Repair Shop, and HP alum-rubber. We recommend either the Repair Shop or HP mounts because the stock OEM design has a flaw that can lead to premature failure of the mounts. The Repair Shop and HP mounts use a different design that will last longer and the Repair Shop mounts also have a lifetime warranty!

    This item fits the following BMWs:
    1996-1999 E36 BMW M3

    Packaged by Turner
    Part #: TMS11812DK
    Price: $283.47 (USD) 
    Free Shipping Free Shipping
    OEM Lemforder Rear Trailing Arm Bushing - E36 E46 Z4

    Bushings tends to wear over time and split or even break free from the internal sleeve, causing excessive movement and sloppy control feel. OEM Lemförder bushings are the perfect option to restore suspension back to day 1 quality.

    OEM Lemförder is an engineering company that focuses on high-quality, precision manufacturing of critical suspension and steering components. Providing exceptionally high quality parts directly to BMW, as well as 50+ other big name automotive companies, such as Mercedes and Audi, their history of reliability and variety of offered parts makes them one of the biggest names for a go-to OEM parts provider. Lemförder parts place an important emphasis on design, production, and assembly, ensuring maximum reliability. They even coat all parts possible with corrosion protection for extended longevity.

    As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

    Lemforder
    Part #: 33326770817
    Price: $18.95 (USD) 
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Rear Shock Mounts (RSM) - Heavy-Duty - E30, E36, E46, Z3, Z4 (Pair)

    This is a BMW shock mount, originally used on the E30 convertible models. Why E30? Because we have tried them all and the E30 cabrio mounts seem to hold up the best. However, all OEM rubber shock mounts will fail - it's just a matter of time. They'll even fail with a stock suspension but even quicker with modified suspensions. These E30 mounts are a little better than the originals. For even greater strength upgrade to the 'Repair Shop' or the aluminum mounts. Priced per pair.

     

    Shipping Dimensions:6 x 6 x 6

    Shipping Weight:1.00
     

    Packaged by Turner
    Part #: 33521132104-K
    Price: $56.70 (USD) 
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    OEM Lemforder Rear Control/Camber Arm Lower Inner Bushing - E36/E46/X3/Z4

    This is the stock replacement rear lower control arm inner bushing, also known as the camber arm or lower wishbone. (sold individually).

    Bushings tends to wear over time and split or even break free from the internal sleeve, causing excessive movement and sloppy control feel. OEM Lemförder bushings are the perfect option to restore suspension back to day 1 quality.

    OEM Lemförder is an engineering company that focuses on high-quality, precision manufacturing of critical suspension and steering components. Providing exceptionally high quality parts directly to BMW, as well as 50+ other big name automotive companies, such as Mercedes and Audi, their history of reliability and variety of offered parts makes them one of the biggest names for a go-to OEM parts provider. Lemförder parts place an important emphasis on design, production, and assembly, ensuring maximum reliability. They even coat all parts possible with corrosion protection for extended longevity.

    As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!


    This item fits the following BMWs:
    1992-1998 E36 BMW 318i 318is 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
    1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
    2004-2010 E83 BMW X3 2.5i X3 3.0i X3 3.0si
    2003-2008 Z4 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe

    Lemforder
    Part #: 33326770824
    Price: $10.95 (USD) 
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Turner Motorsport Rear Trailing Arm Bushing Limiter Kit (RTAB Shim Kit)

    Turner Motorsport Bushing Limiters were the first - and still the best - RTAB Limiter on the market. Instead of a 'floating' design that can rattle and wear, our aluminum Limiters are fixed in place and feature an anti-stick Teflon coating so the bushing never sticks and squeaks.

    The great defect in the rear trailing arm bushing (RTAB) is that the soft rubber design allows too much movement and extension during cornering. The bushing is not strong enough to resist hard cornering loads. A stiffer bushing helps but has trade-offs in ride and comfort. If you want to maintain your ride comfort with rubber bushings, these RTAB Limiters will prolong their life and improve handling.

    These Limiters sit on either side of the bushing and limit its movement. By limiting motion the bushing effectively becomes stiffer, improving handling and reducing toe change during cornering. When not cornering, the Limiters are not in play so ride comfort remains the same as stock. Our Limiters are permanently bolted to the housing that surrounds the bushing. Other types of Limiters 'float' between the bushing and housing, which can rattle and squeak as the bushings move. Instead of plastic or Delrin that will wear over time, our RTAB Limiters are made from aluminum with a tough hardcoat anodize (tougher than standard anodizing) and finished with a Teflon anti-stick coating.

    Turner RTAB Limiter Kit includes -

    • set of 4 anodized aluminum bushing limiters
    • 5mm Allen bolts and washers
    • install template

    Need E36/E46 RTAB bushings? Click here for replacement trailing arm bushings.

    Click for installation instructions.

     

    This item fits the following BMWs:
    1992-1999 E36 BMW 318i 318is 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
    1999-2006 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
    2003-2010 E83 BMW X3 2.5 X3 3.0 X3 3.0si
    2002-2008 E85 E86 BMW Z4 2.5 Z4 3.0 Z4 3.0i Z4 3.0si Z4 M Coupe Z4 M Roadster

    Turner Motorsport
    Part #: TSU9990001
    Price: $76.46 (USD) 
    $89.95 (Sale - Save 15%)
    Free Shipping Free Shipping
    Quantity:   
    Genuine BMW E36, Z3 Strut Tower Reinforcement Plates (Pair) The shock towers on the E36 and Z3 are notoriously weak. Under normal driving conditions with a stock, fresh suspension it is unlikely that you will ever have a problem. But with an upgraded street or race suspension with firm springs much of the energy from pounding the road is transmitted to the thin sheet metal in the strut tower. This pounding will cause the tower to deform or even crack. Look for 'mushrooming' or deformity around the holes for the three mounting studs at the top of the strut tower. The sheetmetal around the holes should really be flat and square. Poor shocks or stiff suspensions will actually cause this sheetmetal to pop up.

    These factory BMW reinforcement plates will help disperse the energy and save you from costly repairs in the future. A strut brace also helps to prevent this but these plates are designed to reinforce the strut tower from the bottom. The install over your strut mount or camber plate and simply add thickness (strength) to the strut tower. They can be sandwiched in place and do not require welding. BMW part number 31312489795

    This item fits the following BMWs:
    1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
    1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe. Note: some Z3 models already come from the factory with these plates.
    Genuine BMW
    Part #: 31312489795K
    Price: $39.52 (USD) 
    $41.22 (Sale - Save 2%)
    Free Shipping Free Shipping
    on orders $199 and up
    OEM Lemforder Front Upper Strut/Shock Mount - Right Side - E36 M3 96-99, MZ3

    The upper strut mount provides a locating point for the top of the front struts. It contains a rubber-isolated bearing that allows the strut shaft to move independently from the rest of the suspension - a critical component for the suspension to be quiet and effective. The rubber also absorbs vibrations and impact harshness, helping to keep unwanted noise and harshness from reaching the steering wheel. OEM Lemförder replacements to ensure a tight, noise-free ride.

    OEM Lemförder is an engineering company that focuses on high-quality, precision manufacturing of critical suspension and steering components. Providing exceptionally high quality parts directly to BMW, as well as 50+ other big name automotive companies, such as Mercedes and Audi, their history of reliability and variety of offered parts makes them one of the biggest names for a go-to OEM parts provider. Lemförder parts place an important emphasis on design, production, and assembly, ensuring maximum reliability. They even coat all parts possible with corrosion protection for extended longevity.

    As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!


    This item fits the following BMWs:
    1996-1999 E36 BMW M3
    1998-2002 Z3 BMW M Roadster M Coupe

    Lemforder
    Part #: 31332227898
    Price: $50.95 (USD) 
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Replacement Bushings for Rear Shock Tower Mounts The bushings in the Aluminum Rear Shock Tower Mounts (#JTD909) and the Repair Shop Rear Shock Mounts (#JRDRP) are replacable. Simply disassemble the shocks and mounts, replace the bushings, and reassemble. On the JTD909 the shock mount doesn't even have to be removed from the chassis. This set includes enough bushings to replace bushings on both the left and right mounts (4 total).
    JT Design
    Part #: JTD909-75-KIT
    Price: $15.90 (USD) 
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Rear Trailing Arm Bushings (RTAB) - Turner Monoball Race - E36, E46, Z4 (Pair) Made in the USA Our Monoball Rear Trailing Arm Bushings are the best solution for completely elimination deflection and unwanted toe changes on the rear of the E36, E46, and Z4. While rubber and urethane bushings flex during load, the toe can change widely giving you nervous and unpredictable handling. These RTABs have a solid aluminum housing with a high-quality race bearing. These bushings were developed over years of competition use in various racing and HPDE events. There is simply no better RTAB unless your racing class rules prohibit the use of mono or spherical bearings.

    The rear trailing arm bushings take a lot of abuse from acclerating, braking and cornering. The stock rubber bushings are just not up to the task of keeping rear wheel alignment in spec for very long, especially if you have upgraded to stickier tires and a better suspension. The pliable rubber flexes and twists which slows down reaction time and leaves you with a car that feels nervous and 'tail happy'. Urethane helps to control the alignment but issues with fitment, maintenance, and longevity keep us from recommending urethane on anything but a street car. We also offer a Delrin RTAB for cars that must conform to certain racing class rules. These aluminum spherical bearings are the best at controlling rear toe alignment.

    Our aluminum RTABs are very well made - high grade aluminum alloy and steel CNC'd out of a billet by an ISO 9001 certified manufacturer, each component is either hardcoated or nickel plated. The bearing is extra wide to accept higher loads and is replacable for a nominal cost. While multiple manufacturer’s offer two piece designs, our research showed that a one piece bushing is a better design.

    Because solid bushings transmit more noise, vibration, and harshness we do not recommend their use on any street car. These are sold for race or track-prepped cars only.

    Clickhere for installation instructions.

    This item fits the following BMWs:
    1992-1998 E36 BMW 318i 318is 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
    1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
    2003-2008 Z4 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
    Turner Motorsport
    Part #: TSU9980020
    Price: $237.96 (USD) 
    $279.95 (Sale - Save 15%)
    Free Shipping Free Shipping
    Quantity:   
    Rear Shock Mounts (RSM) - HP Aluminum/Rubber - E30, E36, E46, Z3, Z4 (Pair) Made in the USA These are the best rear shock mounts that we have found for the E30, E36, E46, Z3 & E85 Z4! Featuring CNC-machined billet aluminum mounting base with a replaceable urethane bushing (replacement bushings are just $15 and are changed in minutes!). These mounts are excellent for either street or track because of their low NVH (noise, vibration, and harshness). Plus, the superior design will far outlast the life of stock mounts - maybe even the car itself. You'll never think twice about your shock mounts again! These shock mounts are a direct replacement of the stock mounts so they fit all shocks with the BMW-standard 10mm shock shaft, including all factory and OEM shocks (Boge, Sachs, etc), H&R coil overs, Bilstein shocks and PSS, PSS9, PSS10 coil overs (except the B16 Ride Control Kit). This is sold as a package with new shock mount gaskets, washers, and Nyloc nuts.

    Must re-use factory cupped washers!

    This item fits the following BMWs:
    1984-1991 E30 BMW 318i 318is 318ic 325e 325es 325i 325ic 325is 325ix M3
    1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
    1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
    1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
    2003-2008 Z4 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
    JT Design
    Part #: JTD909
    Price: $99.95 (USD) 
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Front Upper Strut/Shock Mount - Left or Right Side - E36 M3 1995 The upper strut mount (also known as a guide support) is what the front strut uses to attach to the body of the car. It's a rubber-isolated bearing that absorbs a lot of impact harshness and vibration from the strut and also allows the strut shaft to turn independent of the rest of the suspension. It's an essetial piece to the front suspension and should not be overlooked when replacing your front struts.

    Price is per mount. Left and Right sides are the same part.

    This item fits the following BMWs:
    1995 E36 BMW M3
    Genuine BMW
    Part #: 31332228345
    Price: $94.95 (USD) 
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    3-series Rear Suspension Mount Package - Solid Race Bushings - E36/E36 M3 Rear Suspension Mounts With No Flex or Deflection for Improved Handling, Response, and Long Life
    Building a track-only or racecar means swapping out the flexible rubber bushings and mounts for non-distorting solid pieces. The stock rubber bushings have serious drawbacks when used hard on the racetrack - they wear out quickly, and the flexible material allows extreme changes in alignment. Switching to solid bushings will eliminate the deflection and flex, keeping the suspension motions in their intended alignment and providing more feedback to the driver. On the E36, solid bushings can help prevent rear subframe failure as the sheetmetal chassis will no longer flex along with the rubber mount. Depending on the bushing's intended purpose, the material we use is either aluminum or Delrin. Delrin is a dense plastic material that has almost zero deflection and long life. It's self-lubricating so it won't ever need grease or lube. All of our bushings are designed by our in-house R&D engineers and tested on our various racing cars, with many used in professional racing series around the world.

    If you're building a car for a racing class, the parts and materials you can change to are specified in the rules. Consult your rulebook or tech steward for any clarification. As these bushings have no play or deflection in them, they are not intended for street-focused cars - they do not absorb impacts and vibration like rubber will.

    We offer bushings for the following suspension points -
    subframe mounts x 4 (aluminum)
    inner-upper control arm bushings x 2 (aluminum with bearing)
    differential mounts x 3 (1 Delrin, 2 aluminum)
    outer upper/lower control arm bushings x 4 (OE-spec replacements) (steel with bearing)
    trailing arm bushings (RTABs) x 2 (aluminum with bearing or Delrin)
    suggested: front control arm bushings (FCABs) (Delrin)
    suggested: rear shock mounts (RSMs) x 2 (aluminum with bearing)

    Notes
    Note 1: there is also a inner-lower camber arm bushing. We never developed a solid bushing for this point because every racing class allows adjustable camber arms to be used in this location and we offer those with solid inner bushings.
    Note 2: some racing classes require a non-bearing bushing for the rear trailing arm bushings. In cases like this, we use a Delrin bushing.
    Note 3: the outer upper and lower bushings are already a monoball-style bearing from the factory on all M3 models. They are a great design and last a long time. We offer them as direct replacements or as upgrades for the non-M3 models.

    This item fits the following BMWs:
    1992-1998 E36 BMW 318i 318is 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
    Turner Motorsport
    Part #: TMS11752
    Price: $144.46 (USD) 
    $169.95 (Sale - Save 15%)
    Free Shipping Free Shipping
    on orders $199 and up
    Front Axle Upper Spring Plate 31332227348 UPPER SPRING PLATE
    Genuine BMW
    Part #: 31332227348
    Price: $51.54 (USD) 
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Rear Spring Pad - 5mm - E30 E36 E46 X3 Z3 Z4 This is the rear spring pad it can be used as an upper spring pad on some cars and a lower spring pad on others.. It is a good idea to replace spring pads while replacing shocks or springs. Sold Individually.

    This item fits the following BMWs:
    Lower Spring Pad
    1984-1991 E30 BMW 318i 318is 318ic 325e 325es 325i 325ic 325is 325ix M3
    1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe

    Upper Spring Pad
    1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
    1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
    2004-2010 E83 BMW X3 2.5i X3 3.0i X3 3.0si
    2003-2008 Z4 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
    URO
    Part #: 33531136385
    Price: $4.95 (USD) 
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Front Control Arm Bushings (FCAB) - Offset Delrin Race - E30, E36, Z3 (Pair)

    These bushings have the hole off-center to give your car a little more track, caster, and camber. This style came as standard equipment on E30 M3s (8/89-later) and 1995 E36 M3 but will work with any E30, E36, Z3.

    Rubber control arm bushings are designed to flex and absorb energy. That's fine on a streetcar but on an all-out racing machine you want your alignment to stay constant. We have picked Delrin for this application due to its high rigidity and low coefficient of friction allowing for minimal suspension bushing deflection (geometry change) but decreasing bushing windup or drag (friction). They are not recommended for street-use but highly-recommended for track cars.

    To save time, pick up a pair of new bushing carrier brackets and hardware. This will save you the time and hassle of pressing out the old bushings. This will especially save you time if you're buying new control arms at the same time (no time wasted removing the old brackets from the arms). Stainless steel set screws included.

    Turner Motorsport
    Part #: TSU3080D30
    Price: $76.46 (USD) 
    $89.95 (Sale - Save 15%)
    Free Shipping Free Shipping
    on orders $199 and up
    Front Control Arm Bushings (FCAB) - Centered Delrin Race - E30, E36, Z3 (Pair)

    Solid Delrin front control arm bushings with a centered hole. This style came as standard equipment on non-M E30, all E36 (except 1995 M3), and non-M Z3. The centered bushing was also standard on the 96-99 E36 M3.

    Rubber control arm bushings are designed to flex and absorb energy. That's fine on a streetcar but on an all-out racing machine you want your alignment to stay constant. We have picked Delrin for this application doe to its high rigidity and low coefficient of friction allowing for minimal suspension bushing deflection (geometry change) but decreasing bushing windup or drag (friction). They are not recommended for street-use but highly-recommended for track cars.

    To save time, pick up a pair of new bushing carrier brackets and hardware. This will save you the time and hassle of pressing out the old bushings. This will especially save you time if you're buying new control arms at the same time (no time wasted removing the old brackets from the arms). Stainless steel set screws included.

    Turner Motorsport
    Part #: TSU3080202
    Price: $76.46 (USD) 
    $89.95 (Sale - Save 15%)
    Free Shipping Free Shipping
    on orders $199 and up
    Rear Shock Mounts (RSM) - HP Aluminum/Rubber for 12mm Shock Pin - E30, E36, E46, Z3, Z4 (Pair) Made in the USA These rear shock mounts are specifically for use with rear shocks with a 12mm shaft, such as some Koni shocks. They feature anodized aluminum and a heavy duty rubber bushing. Note that the Bilstein Ride-Control B16 kit uses a 12mm shaft (that kit is different than the Bilstein PSS9/PSS10 kits, which use the BMW-standard 10mm shaft).
    Turner Motorsport
    Part #: TCKRUM12R
    Price: $93.46 (USD) 
    $109.95 (Sale - Save 15%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    3-series Strut/Shock Mount Kit - E36 M3 95 This strut and shock mount package covers the front and rear rubber mounts and bushings commonly replaced during a strut and shock install. While you're installing new front struts and rear shocks these are easily installed - there's no additional labor and special tools are not required. Since these pieces are mostly rubber, they dry up and crack over time. Re-using them lead to problems with fitment or noise, and may have safety issues as well. These mounts and pads are the perfect complement to your new shocks to help restore your car's handling and performance.

    We sell the basic strut and shock mount package, which includes:
  • Front strut mounts (also known as guide support)
  • Front strut reinforcement plates (to prevent cracking and deforming of the front strut towers)
  • Front strut tower paper washer gaskets
  • Front and rear self-locking mounting nuts
  • Rear Lifetime Warranty 'Repair Shop' shock mounts
  • Rear shock mount reinforcements (to prevent cracking of shock towers)
  • Rear shock mount gaskets
    In addition, you can add the front spring pads, front bump stops, front dust boots, rear bump stops, and rear dust boots if needed. But please note that some shocks and coil overs come with all or some of these pieces already. If in doubt, check with your supplier on what is included.

    We offer three varieties of the rear shock mounts - OEM, Repair Shop, and HP alum-rubber. We recommend either the Repair Shop or HP mounts because the stock OEM design has a flaw that can lead to premature failure of the mounts. The Repair Shop and HP mounts use a different design that will last longer and the Repair Shop mounts also have a lifetime warranty!

    This item fits the following BMWs:
    1995 E36 BMW M3
  • Turner Motorsport
    Part #: TMS338692
    Price: $349.37 (USD) 
    Free Shipping Free Shipping
    3-series Rear Suspension Mount Package - Rubber Street Bushings - E36/E36 M3

    OEM or Upgraded Rubber Mounts and Bushings to Restore Precision and Comfort
    Turner Motorsport has focused on the needs of weary E36 owners by coming up with this upgraded bushing package for the rear suspension/subframe. With the bushings being so critical in the E36, keeping up with the maintenance of theseparts will do wonders for the ride/handling. This package covers all of the bushings in the rear suspension its everything in one box! Buy as a package and save $$.

    Package includes:

    • rear subframe mounts (stock M3 bushings - upgrade for non-M cars)
    • rear trailing arm bushingswith TMSlimiters
    • innercamber arm bushings
    • Outercamber arm bushings
    • innerupper spring arm bushings
    • Outerupper spring arm bushings
    • differentialmounts (TMS solid type, safe for street use)
    • rear shock mountswith TMS reinforcments


       
    • Wherever possible we upgraded each of these bushings to provide better handling or make them last longer. These bushings are all designed for street use but most ofthem are upgrades of the original bushings. We also sell solid Delrin or aluminum bushings but they should only be used for track cars and only as a kit with other solid mounts. Individual items available of course, clickhere.

      We also sell replacement front control arms and bushings. These should not be overlooked!
    Packaged by Turner
    Part #: E36REARBUSHINGS
    Price: $728.20 (USD) 
    Free Shipping Free Shipping
    Quantity:   
    Rear Trailing Arm Bushings (RTAB) - Meyle HD Rubber - E36, E46, Z4 (Pair) The rear trailing arm bushings (RTABs) control the toe alignment of the rear suspension. When they go bad, the rear traction suffers because the wheel's toe angle is moving excessively in and out during cornering. This can make the car feel nervous and 'tail happy' even during modest cornering speeds. As important as these bushings are, they only seem to last 40-50,000 miles on their own.

    These German-made Meyle bushings are about 20% stiffer than the originals. The harder rubber allows less compliance which gives better feedback and crisper handling. All Meyle HD parts are warranted for 4 years. It's a performance upgrade with no downside.

    Any RTAB would benefit from our Bushing Limiters. These spacer shims fit on either side of the bushing and limit excess rotation. It's this over-extending of the bushing that causes them to wear out so fast. The Limiters will prolong the life of the bushing and are an easy install when performing the bushing replacement.

    Price is per pair of bushings.

    This item fits the following BMWs:
    1992-1998  E36 BMW  318i 318is 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
    1999-2005  E46 BMW  323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
    2004-2010  E83 BMW  X3 2.5i X3 3.0i X3 3.0si
    2003-2008  Z4 BMW  Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
    Meyle HD
    Part #: 33321097009MYKT
    Price: $55.90 (USD) 
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Genuine BMW Differential Mount Bushing, Front - 33171134871 - E36 BMW

    Replacement OE Front Differential Mount Bushing

    GENUINE BMW RUBBER MOUNTING:331020

    Genuine BMW
    Part #: 33171134871
    Price: $18.53 (USD) 
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Rear Subframe Bushings/Mount Set - Turner Solid Race - E36, E36 M3

    TMS E36 solid sub-frame bushings are designed for track and racecars to remove twisting and flexing of the subframe where it mounts to the rear floor. This twisting is one of the causes of rear subframe/floor failure in E36 cars. We originally developed these for our SCCA SPEED World Challenge cars. A BMW's subframe is the heart of the suspension. Because the subframe is mounted with rubber isolators, when the subframe moves, so does the rest of the suspension mounting points. As the rubber wears and becomes more pliable, the alignment and suspension settings move even more. Replace the stock rubber bushings to limit drivetrain and suspension movement and keep your car set up the way it's supposed to be.

    Our mounts are designed using a CAD program with further attention paid to making the mount as light as possible. We also notched the flanges to allow the use of the BMW factory removal tools. One front bushing is slotted to allow for compliance between manufacturing standards as BMW specifies. These bushings are CNC machined out of high grade billet aluminum.

    Click for installation instructions. (PDF)

    Turner Motorsport
    Part #: TDR3680002
    Price: $192.06 (USD) 
    $225.95 (Sale - Save 15%)
    Free Shipping Free Shipping
    Quantity:   
    OEM Lemforder Rear Control Arm Upper Inner Bushing - E36/E46/X3/Z4

    This is the OEM Lemforder replacement rear upper control arm inner bushing. (sold individually) Bushings tends to wear over time and split or even break free from the internal sleeve, causing excessive movement and sloppy control feel. OEM Lemförder bushings are the perfect option to restore suspension back to day 1 quality.

    OEM Lemförder is an engineering company that focuses on high-quality, precision manufacturing of critical suspension and steering components. Providing exceptionally high quality parts directly to BMW, as well as 50+ other big name automotive companies, such as Mercedes and Audi, their history of reliability and variety of offered parts makes them one of the biggest names for a go-to OEM parts provider. Lemförder parts place an important emphasis on design, production, and assembly, ensuring maximum reliability. They even coat all parts possible with corrosion protection for extended longevity.

    As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

    This item fits the following BMWs:
    1992-1998 E36 BMW 318i 318is 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
    1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
    2004-2010 E83 BMW X3 2.5i X3 3.0i X3 3.0si
    2003-2008 Z4 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe

    Lemforder
    Part #: 33321092247
    Price: $11.49 (USD) 
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    ECS Rear Trailing Arm Bushing Limiter Set

    The E36/E46 rear trailing arm bushings (RTABs) wear out faster than any other bushing on the car. Worn RTAB will cause excessive toe alignment change and give a 'loose' or 'floaty' feeling in the rear handling. One of the reasons for this is that they over-extend during motion, stretching and twisting the rubber in all directions. These shims sit on either side of the bushing and limit the amount of extension from the bushing. Not only will you get more life from your RTAB but these will help stiffen the bushing during cornering. But during normal driving you will still have all of the comfort of the stock rubber bushings. These part about these bushings is how easy they are to install - simply slide them in place during your bushing install. They can be added to pre-installed bushings too by dropping the trailing arm and removing the cage around the bushing.

    Works with stock rubber bushings only (not urethane or Delrin).

    ECS
    Part #: 003301ECS01AKT
    Price: $42.46 (USD) 
    $49.95 (Sale - Save 15%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    OEM Lemforder Front Control Arm Bushings - E30, E36, E36 M3, Z3

    Anytime that you replace your front control arms you must replace your control arm bushings. The reason is because it's hard to tell if you're bushings are really bad and they are often destroyed when removed. These are the control arm bushings from the 1996-1999 E36 M3 and have the hole in the center.

    These are the stock bushings bushings from the 1996-99 E36 M3 and MZ3 but are a great upgrade for any E30 - 318/325, E36 - 325/323/328, and Z3 -1.9, 2.3, 2.5, 2.8, 3.0. They have more rubber than the non-M stock bushings. We have found the increased volume of rubber helps the bushings last longer and have better steering response due to less deflection of the bushing. These bushings can actually help reduce vibrations produced by the mass of larger wheels or brakes.

    OEM Lemförder is an engineering company that focuses on high-quality, precision manufacturing of critical suspension and steering components. Providing exceptionally high quality parts directly to BMW, as well as 50+ other big name automotive companies, such as Mercedes and Audi, their history of reliability and variety of offered parts makes them one of the biggest names for a go-to OEM parts provider. Lemförder parts place an important emphasis on design, production, and assembly, ensuring maximum reliability. They even coat all parts possible with corrosion protection for extended longevity.

    As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!


    This item fits the following BMWs:
    1984-1991 E30 BMW 318i 318is 318ic 325e 325es 325i 325ic 325is
    1992-1999 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic
    1996-1999 E36 BMW M3
    1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Coupe M Roadster

    Lemforder
    Part #: 31129069035
    Price: $29.00 (USD) 
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Rear Bump Stop for Lowered Suspensions - E36, E46 all except Xi, M3 This rear shock bump stop is designed for use on cars with lowered suspensions. The bump stop itself is shorter than the stock bump stop to allow for extra travel.

    This item fits the following BMWs:
    1992-1998 E36 BMW 318i 318is 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
    1999-2005 E46 BMW 323i 323ci 325i 325ci 328i 328ci 330i 330ci
    URO
    Part #: 33531138109
    Price: $17.95 (USD) 
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Front Control Arm Bushings (FCAB) - Centered Solid Rubber - E30, E36, E36 M3, Z3 (Pair) Anytime that you replace your front control arms you must replace your control arm bushings. The reason is because it's hard to tell if you're bushings are really bad and they are often destroyed when removed. These are the control arm bushings from the 1996-1999 E36 M3 and have the hole in the center.

    These are the stock bushings bushings from the 1996-99 E36 M3 and MZ3 but are a great upgrade for any E30 - 318/325, E36 - 325/323/328, and Z3 -1.9, 2.3, 2.5, 2.8, 3.0. They have more rubber than the non-M stock bushings. We have found the increased volume of rubber helps the bushings last longer and have better steering response due to less deflection of the bushing. These bushings can actually help reduce vibrations produced by the mass of larger wheels or brakes.

    For convenience, we carry the steel bushing carrier brackets (part# TSU9995PB3) with new hardware which will save you downtime caused by pressing out the old bushings and pressing in the new bushings.

    This item fits the following BMWs:
    1984-1991 E30 BMW 318i 318is 318ic 325e 325es 325i 325ic 325is
    1992-1999 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic
    1996-1999 E36 BMW M3
    1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Coupe M Roadster
    Packaged by Turner
    Part #: 31129069035
    Price: $29.00 (USD) 
    Free Shipping Free Shipping
    on orders $199 and up
    OEM Lemforder Rear Outer Upper or Lower Trailing Arm Ball Joint - E36, E46, X3, Z4

    This ball joint is used for the upper rear trailing arm bushing on ALL E36, E46, E83 X3, and E85 Z4 cars. BMW also used it as the lower bushing on most M cars. It makes a great upgrade on all non-M cars where BMW used a rubber bushing at the lower position.

    This sealed ball joint is one of the best things about the rear suspension - it functions extremely well and lasts a long time. And it can be used as a replacement for the existing bushing without any further modification. The non-M cars used a solid rubber bushing for the lower arm (camber arm, wishbone) which does not last very long and relies on bushing deflection (twist) during suspension motions. The ball joint inside the upgraded design is much more effective during this suspension movements as it does not bind or deflect. And because it's sealed with rubber it will last a long time and remain quiet and maintenance free. Most customers report that after installing or "upgrading" to these bushings the rear end of their car felt much more stable.

    Price is per bushing. Left/Right and Upper/Lower are the same part.

    OEM Lemförder is an engineering company that focuses on high-quality, precision manufacturing of critical suspension and steering components. Providing exceptionally high quality parts directly to BMW, as well as 50+ other big name automotive companies, such as Mercedes and Audi, their history of reliability and variety of offered parts makes them one of the biggest names for a go-to OEM parts provider. Lemförder parts place an important emphasis on design, production, and assembly, ensuring maximum reliability. They even coat all parts possible with corrosion protection for extended longevity.

    As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!


    This item fits the following BMWs:
    1992-1998 E36 BMW 318i 318is 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
    1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
    2004-2010 E83 BMW X3 2.5i X3 3.0i X3 3.0si
    2003-2008 Z4 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe

    Lemforder
    Part #: 33326775551
    Price: $29.95 (USD) 
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    OEM Lemforder Front Spring Pad - E30, E36 M3, E28, E34, E24, E32, Z3 M Coupe/Roadster, Z1

    Spring pads wear and split over time from pressure. To prevent damage to the spring or excess vibration or noise transferring into the cabin, replace old spring pads with an OEM Lemforder replacement to restore everything back to original quality.

    OEM Lemförder is an engineering company that focuses on high-quality, precision manufacturing of critical suspension and steering components. Providing exceptionally high quality parts directly to BMW, as well as 50+ other big name automotive companies, such as Mercedes and Audi, their history of reliability and variety of offered parts makes them one of the biggest names for a go-to OEM parts provider. Lemförder parts place an important emphasis on design, production, and assembly, ensuring maximum reliability. They even coat all parts possible with corrosion protection for extended longevity.

    As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

    Lemforder
    Part #: 31331124322
    Price: $2.95 (USD) 
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    E82, E9X Dinan Monoball Front Thrust Arm Bushings (Pair)

    For someone looking for superior performance and longevity these sealed monoball bushings are the best upper thrust bearing you can buy for an E82 1-series or E9X 3-series. The advantage of a monoball bearing is that it will not deflect under load. All of the rubber bushings move in all sorts of directions and that changes your alignment, especially when used with big brake kits or when driven hard. The condition worsens as the bushing wears out. The Dinan monoball sits in a CNC machined aluminum housing which has zero deflection. The monoball allows complete freedom of movement but only at the desired angles. What you get is superior steering precision, better handling from more consistent alignment, and almost infinite bushing life. And thanks to the inner liner and sealed rubber boots there's none of the extra noise or reduced service life of fully solid race bushings. 

    We strongly advise using these with new control arms. BMW recommends that the bushings be replaced only once per set of control arms. So if your thrust arm bushings have been replaced already then we do not recommend re-using the arms. The other reason is that the aluminum arms stretch over time which will make the bushings loose inside the arm. Other manufacturers recommend filling the stretched arms with paste but replacing the control arm is the better solution.

    For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere.

    This item fits the following BMWs:
    2008-2013 E82 E88 BMW 128i 135i 1M Coupe
    2006-2011 E90 BMW 325i 328i 330i 335d 335i M3 - Sedan
    2007-2011 E91 BMW 325i 328i - Touring Wagon
    2007-2013 E92 BMW 328i 335i 335is M3 - Coupe
    2007-2013 E93 BMW 328i 335i 335is M3 - Convertible

    Dinan
    Part #: D280-0008
    Price: $514.00 (USD) 
    Free Shipping Free Shipping
    Quantity:   
    Get notified about money saving
    specials & deals for your BMW
    enter your email address
  • 22 years of BMW Tuning.
  • Award winning service.
  • 10,000's of parts in stock.
  • Quality BMW Parts only.
  • Hassle-free returns.

  • Find us on Facebook




    • 1-800-280-6966
      Mon-Thur 9am-6pm ET, Fri 9am-5pm ET

      • © TurnerMotorsport.com 1993-2017. All Rights Reserved.