Contact YouTube Blog Twitter facebook Turner Motorsport on Instagram
1-800-280-6966
 |   Login
  • 0
 |   Login
Shopping Cart (0) Wishlist
Contact

(0) item(s) in your Shopping Cart

Home

Categories

Specials

Gifts & Clothing

  1. Genuine BMW Accessories
  2. Genuine BMW Clothing
  3. Turner Shirts Hats and Gear
  4. Gifts under $25
  5. Gifts under $50
  6. Gifts under $100
  7. Gifts over $100
  8. Gift Certificates
  9. Stocking Stuffers
  10. Gift Packages

Brakes

  1. Brake Overhaul Packages
  2. Brake Pads
  3. Brake Pad Sensors
  4. Brake Rotors
  5. StopTech Big Brake Kits
  6. Brembo Big Brake Kits
  7. Stainless Steel Brake Lines
  8. Brake Fluid
  9. Brake Calipers
  10. Caliper Rebuild Kits
  11. Parking Brake Parts
  12. Brake Master Cylinders
  13. ABS/DSC System Parts
  14. Brake Cooling Ducts & Backing Plates
  15. Brake Pads - Brembo GT BBK Calipers
  16. Brake Pads - StopTech BBK Calipers

Car Care & Accessories

  1. Car Covers
  2. Wheel & Tire Cleaning
  3. Wax, Polish and Cleaning Supplies
  4. Detailing Gear
  5. Leather & Plastic Care
  6. Car Cleaning Supplies
  7. Chassis Paint, Coatings, Sealants, and Rust Conversion

Drivetrain

  1. Differential and Gearing Upgrades
  2. Differential Mounts and Upgrades
  3. OEM Clutch Kits & Clutch Parts
  4. Performance Clutch Kits & Parts
  5. Lightweight Aluminum Flywheel Upgrades
  6. Stock OEM Dual Mass Flywheels
  7. Stainless Steel Clutch Lines
  8. Clutch Parts
  9. UUC Short Shift Kits
  10. Axle Shafts
  11. Driveshafts
  12. B&M Short Shifters
  13. Performance Short Shift Kits
  14. UUC DSSR - Double Sheer Selector Rod
  15. Drivershaft Center Support Bearings
  16. Flex Discs & Guibos
  17. Transmission Mounts
  18. Transmission Parts

Engine Chips

  1. Performance Chips, 1986-1995 Models
  2. Shark Injector Performance Software, 1996-2005 Models

Engine Parts

  1. Engine Performance Packages
  2. Water Pumps
  3. Thermostats
  4. Radiators & Cooling System Overhaul Kits
  5. Oil Pan Baffles
  6. Radiator Hoses, Cooling Hoses, & Hose Sets
  7. Engine Fans & Fan Clutches
  8. Underdrive Power Pulleys
  9. Camshafts
  10. Schrick Peformance Camshafts
  11. External Engine Parts
  12. Drive Belts & V-Belts
  13. Gaskets, Gasket Sets, Seals, & O-Rings
  14. Crankcase Vent, PCV, and Oil Separator Systems
  15. Motor Mounts
  16. Electrical Sensors, Switches, & Relays
  17. Ignition Parts
  18. Alternator & Alternator Parts
  19. Starter Motors & Starter Parts
  20. Fuel System Parts
  21. Internal Engine Parts
  22. Cylinder Head Parts & Head Bolts
  23. VANOS Units & Parts
  24. Oil Coolers & Oil Cooler Parts

Exhaust

  1. Supersprint Performance Exhaust Systems
  2. Performance Headers & Downpipes
  3. Borla Performance Exhaust Systems
  4. Corsa Performance Exhaust Systems
  5. Exhaust System Upgrades
  6. Oxygen Sensor - O2 Sensors
  7. Exhaust Gaskets Hangers and Parts

Exterior / Body

  1. Black Grills
  2. Chrome Grills & Trim
  3. Emblems & Decals for Hood, Trunk, and Wheels
  4. Front Spoilers, Bumper Covers, & Air Dams
  5. Rear Spoilers, Rear Wings, & Aprons
  6. Body Trim Parts & Accessories
  7. Hood & Trunk Shocks, Struts
  8. License Plate Brackets & License Plate Frames
  9. Mirror Kits & Mirror Parts
  10. Window Regulators & Motors
  11. Wiper Blades, Wiper Pumps, & Wiper Motor Parts
  12. Hood Pins and AeroCatch Latches
  13. Racing Tow Hooks and Tow Straps

Intake

  1. aFe Cold-Air Intake Kits
  2. Turbos & Active Autowerke Superchargers
  3. Performance Intake Kits
  4. aFe Performance Air Filters
  5. K&N Performance Air Filters
  6. Replacement Cone Air Filters (for Cold Air Intakes)
  7. Intake Cleaning & Recharging Kits
  8. Intake Manifold Upgrades
  9. Intake Manifold Components (DISA, Vacuum, CCV, Etc)
  10. Mass Air Sensor & Air Flow Meters
  11. Intake Boots & Hoses
  12. Throttle Body Parts

Interior

  1. Floor Mats
  2. Gauge Kits and Data Acquisition
  3. Auxiliary Input Adaptors for BMW
  4. Pedal Sets
  5. Escort Radar Detectors
  6. Factory Steering Wheels
  7. MOMO Steering Wheels
  8. Shift Knobs, Shift Boots, & Shift Handles
  9. Seats & Seat Accessories
  10. Seat Belts and Racing Harnesses
  11. Cup Holders and Storage
  12. Carbon Fiber Interior Parts
  13. Door Sill Strips
  14. Heating & Air Conditioning
  15. Interior Switches and Switchgear
  16. Sunshades & Windscreens
  17. Interior Trim & Accessories

Lighting

  1. Euro Clear Turn Signals, Parking Lights, & Tail Lights
  2. Turn Signals / Parking Lights
  3. Angel Eye Headlight Conversions
  4. Bulbs for Headlights, Turn Signals and Tail Lights
  5. Headlights, Headlight Lenses, & Headlight Parts
  6. Fog Lights, Fog Light Lenses, & Fog Light Parts
  7. Tail Lights
  8. Stealth Bulbs

Maintenance

  1. Routine Maintenance & Tune-Up Packages
  2. Oil Filters & Oil Filter Kits
  3. Air Filters
  4. Fuel Filters
  5. Cabin Air Filters, Heppa Filters, & Microfilters
  6. Transmission Filter Kits & Transmission Service Parts
  7. Ignition Coils
  8. Spark Plugs
  9. Bentley Repair / Service Manuals
  10. Service Reset Tools & Fault Code Readers
  11. Anti-Freeze and Coolant
  12. Engine Oils - Genuine BMW and OEM
  13. Power Steering and Hydraulic Fluids
  14. Transmission and Gear Oil - Genuine BMW and OEM
  15. MOTUL Engine Oil and Gear Lubricants
  16. Red Line Oil & Fluids

Suspension

  1. Shocks & Struts
  2. H&R Performance Springs
  3. Spring & Shock Packages
  4. Turner / H&R Height Adjustable Spring Sets
  5. Bilstein PSS PSS9 PSS10 Coil Over Suspensions
  6. H&R Coil Over Suspensions
  7. KW Coil Over Suspensions
  8. Moton Coil Overs & Race Shocks
  9. ST Suspension Coilover Kits
  10. Turner Motorsport Racing Suspension Kits
  11. Chassis Reinforcement Kits & Parts
  12. Sway Bar Kits
  13. Sway Bar Links & Sway Bar Parts
  14. Camber / Caster Kits
  15. Strut Braces & Stress Bars
  16. Control Arm Replacements & Upgrades
  17. Suspension Bushings & Mounts
  18. Wheel Bearings & Hub Assemblies
  19. Steering Racks & Power Steering Pumps
  20. Tie Rods & Steering Parts
  21. Coil Over Spring Hardware

Wheels

  1. Apex Flow Formed Alloy Wheels
  2. Forgeline Custom Forged Alloy Wheels
  3. D Force Flow Formed Alloy Wheels
  4. Original BMW Wheels and Wheel Upgrades
  5. Turner Motorsport Wheel Spacers
  6. H&R Wheel Spacers
  7. Wheel Bolts, Wheel Studs and Nuts
  8. Wheel Emblems, Caps, and Accessories

Tools

  1. Alignment Tools
  2. Battery Chargers and Tenders
  3. Brake Tools
  4. Clutch Alignment Tools
  5. Coil Over Wrenches
  6. Cylinder Head and VANOS Tools
  7. Fan and Fan Clutch Tools
  8. Fault Code Readers and OBD Scan Tools
  9. Fuel System Tools
  10. Genuine BMW Tool Kits
  11. Oil Service Tools
  12. Sockets
  13. Spark Plug Sockets
  14. Transmission and Differential Tools
  15. Wheel Pin Tools
  16. Workshop Chemicals

Clearance/Used Parts

Choose BMW

BMW 1 Series

  1. (E82) 1-series Coupe 2008+
  2. (E88) 1-series Convertible 2008+

BMW 2 Series

  1. (F22) 2-Series Coupe 2014+
  2. (F23) 2-Series Convertible 2014+

BMW 3 Series

  1. (E21) 3-Series 1977-1983
  2. (E30) 3-series 1984-1991
  3. (E30) M3 1988-1991
  4. (E36) 3-series 1992-1999
  5. (E36) M3 1995-1999
  6. (E46) 3-Series 1999-2005
  7. (E46) M3 2001-2006
  8. (E90) 3-Series Sedan 2006-2011
  9. (E90) M3 Sedan 2008-2013
  10. (E91) 3-Series Touring 2006-2013
  11. (E92) 3-Series Coupe 2007-2013
  12. (E92) M3 Coupe 2008-2013
  13. (E93) 3-Series Convertible 2007-2013
  14. (E93) M3 Convertible 2008-2013
  15. (F30) 3-Series Sedan 2012+
  16. (F31) 3-Series Touring 2014+
  17. (F80) M3 2015+

BMW 4 Series

  1. (F32) 4-Series Coupe 2014+
  2. (F33) 4-Series Convertible 2014+
  3. (F34) 4-Series Gran Turismo 2014+
  4. (F82) M4 Coupe 2015+
  5. (F83) M4 Convertible 2015+

BMW 5 Series

  1. (E34) M5 1991-1993
  2. (E39) M5 2000-2003
  3. (E60) M5 2006-2010
  4. (E28) 5-Series 1982-1988
  5. (E34) 5-Series 1989-1995
  6. (E39) 5-Series 1996-2003
  7. (E60) 5-Series Sedan 2004-2010
  8. (E61) 5-Series Touring 2006-2010
  9. (F10) 5-Series 2011+

BMW 6 Series

  1. (E24) 6-Series 1977-1989
  2. (E63) 6-Series Coupe 2004-2010
  3. (E64) 6-Series Convertible 2004-2010
  4. (F06) 6-Series Gran Coupe 2013+
  5. (F12) 6-Series Coupe 2011+
  6. (F13) 6-Series Convertible 2011+

BMW 7 Series

  1. (E32) 7-Series 1988-1994
  2. (E38) 7-Series 1995-2001
  3. (E65) 7-Series SWB 2002-2007
  4. (E66) 7-Series LWB 2002-2007
  5. (F01) 7-Series SWB 2009+
  6. (F02) 7-Series LWB 2009+

BMW 8 Series

BMW Classics (E9, Bavaria, Isetta, etc)

  1. 2500
  2. 2800
  3. 3.0Si
  4. Bavaria
  5. 2800CS
  6. 3.0CS
  7. 2002
  8. 2002tii
  9. (E12) 528i 1977-1981
  10. (E12) 530i 1975-1978

BMW X Series (SAV)

  1. (E84) X1 Series 2013+
  2. (E83) X3 2004-2010
  3. (F25) X3 2011+
  4. (F26) X4 2015+
  5. (E53) X5 2000-2006
  6. (E70) X5 2007-2013
  7. (F15) X5 2014+
  8. (F85) X5 M 2015+
  9. (E71) X6 2008+
  10. (F16) X6 2015+
  11. (F86) X6 M 2015+

BMW Z Series

  1. (E36/7) Z3 1997-2002
  2. (E85) Z4 M Roadster
  3. (E85/E86/E89) Z4 2003+
  4. (E86) Z4 M Coupe
  5. (E52) Z8 2000-2003

BMW 1600-2002 / tii

BMW i Series

  1. (I01) BMW i3 2014+
  2. (I12) BMW i8 2014+

MINI Cooper and Cooper S

Racing

Racing Home

Racing News

Racing Schedule

Racing Photo Gallery

Gallery

Photo Gallery

Wallpaper

Project Cars

  1. Project i8
  2. Project F80 M3
  3. Turner F82 M4
  4. Turner X5 M
  5. Turner F22 2 Series
  6. Turner F13 M6
  7. Turner F10 M5
  8. Turner F30 335i
  9. Turner E9X M3
  10. Turner E92 335i
  11. Turner E82 1 Series
  12. Turner ActiveE (100% Electric)
  13. Turner E46 M3
  14. Turner E46 330i ZHP
  15. Turner E36 M3
  16. Turner E30 M3
  17. Turner MINI Cooper S
  18. McLaren F1
  19. Turner E92 M3 Lime Rock
  20. Turner F80 M3 Silverstone

Video Gallery

Projects

Turner i8

Turner F80 M3

Turner F82 M4

Turner X5 M

Turner F22 2 Series

Turner F13 M6

Turner F10 M5

Turner F30 335i

Turner E9X M3

Turner E92 335i

Turner E82 1 Series

Turner ActiveE (100% Electric)

Turner E46 M3

Turner E46 330i ZHP

Turner E36 M3

Turner E30 M3

Turner MINI Cooper S

McLaren F1

Turner E92 M3 Lime Rock

Turner F80 M3 Silverstone

About Us

About Turner Motorsport

Customer Feedback

The Turner Team

Employment Opportunities

Returns Policy

Shipping Info

Contact Us

Privacy Policy

Security Policy

FAQs

BMW E36-M3 Seats & Seat Accessories

Whether you're building a track-only speed machine, show car, or ultra-serious street ride the seats can make an awesome upgrade. Aside from the obvious safety considerations with a seat, there are few upgrades that can have more of an impact in your driving experience. Sport or Race seats envelope and grip the driver's body, holding him/her in place even under extreme driving situations. When strapped into a seat with the appropriate harnesses you can become an integrated part of the car. Without the sliding around of stock seats you can have greater confidance and focus on the act of driving. Turner Motorsport is an authorized Recaro dealer and we use them in all of our racecars and high-level tuner project cars. We offer the full range of Recaro tuner and racing seats with mounts and adapters and other accessories.
You're currently viewing parts for your (E36) M3 1995-1999. Reset your chassis
For accurate results, specify your model below.

Save huge! - Warehouse Clearance - Open Box - Customer Cancelled Order

Recaro's safest racing seat! The Pro Racer HANS is designed to be fully compatible with the HANS safety system. The Pro Racer features more sculpting to the shell to allow more clearance between the seat and the HANS device around your neck and chest. Some other seats can push on the HANS and make it uncomfortable when it should be nearly transparent. This is also one of the most enclosing and protective seats on the market. Not only does it feature the integrated head protection, the side bolsters are taller than most seats and the shoulders feature an anti-slip surface to keep your body in place. But apart from being safe, this seat is comfortable too!

This seat is available in the standard sizing as well as an optional XL size. See dimensions chart to the right.

Pro Racer HANS Seat Specs:

Shell MaterialKevlar carbon-fiber composite

fabric materialvelour

fabric colorsblack

logo colorwhite

harness guidesYes for 4, 5, or 6 point

seat mountside mount, not included

slidersnot included

chassis mountsnot included

 

Part #: TMS201461
Price: $2499.95 (USD) 
$3129.00 (Sale - Save 20%)
Quantity:   
The Recaro Speed is a street tuner seats inspired by Recaro's full motorsport seats. The Speed has very aggressive thigh and side bolsters with supportive shoulder extensions. This is a very capable and supportive seat with all of the attributes of a race seat but with ergonomic features that make it suitable for street use. This seat can be used with the standard 3-point seatbelt or 4-point harness. An option for a 5-point is available. This seat is very very close to the seats used in the special edition E30 M3 Sport Evolution model.

Seat Specs:
shell materialsteel frame
fabric materialstandard: cloth; optional materials: suede, vinyl, saturn, jersey
fabric colorsstandard: black; custom colors available
logo colorbeige, silver, red, black
harness guidesYes, for 3 or 4 point. 5 point optional.
seat adjustmentsbackrest angle, fore-aft (with optional sliders)
seat mountbottom mount
slidersnot included
chassis mountsnot included
Fitment notes:
  • This is a bottom-mount seat and seat adapters are included. However, a vehicle-specific floor adapter plate is still required. The seat will attach to either a set of sliders or be fixed in place directly to the floor plate (non adjustable).
  • This seat is designed mainly for street use. However, depending on the car model, various modifications and fabrication may be required to retain any of the original seat features. This is more of an issue on newer cars with integraged occupancy sensors, power and heat, seat memory settings, air bags, etc. Professional installation, or detailed knowledge, on newer cars is strongly recommended. We also recommend custom installation to gain the ideal seating position for your tastes.
  • Part #: RECARO-SPEED
    Price: $999.00 (USD) 
    The Recaro Speed S seat is a street tuner seat inspired by Recaro's full motorsport seats but with lower cushion height to make it easier to get in and out. The Speed S has the same aggressive side bolsters with supportive shoulder extensions as the standard Speed seat. This is a very capable and supportive seat with all of the attributes of a race seat but with ergonomic features that make it suitable for street use. This seat can be used with the standard 3-point seatbelt or 4-point harness.

    Seat Specs:
    shell materialsteel frame
    fabric materialstandard: cloth; optional materials: suede, vinyl, saturn, velour
    fabric colorsstandard: black; custom colors available
    logo colorsilver, red, white, blue
    harness guidesYes, for 3 or 4 point.
    seat adjustmentsbackrest angle, fore-aft (with optional sliders)
    seat mountbottom mount
    slidersnot included
    chassis mountsnot included
    Fitment notes:
  • This is a bottom-mount seat and seat adapters are not included. A vehicle-specific floor adapter plate is required. The seat will attach to either a set of sliders or be fixed in place directly to the floor plate (non adjustable).
  • This seat is designed mainly for street use. However, depending on the car model, various modifications and fabrication may be required to retain any of the original seat features. This is more of an issue on newer cars with integraged occupancy sensors, power and heat, seat memory settings, air bags, etc. Professional installation, or detailed knowledge, on newer cars is strongly recommended. We also recommend custom installation to gain the ideal seating position for your tastes.
  • Part #: RECARO-SPEED-S
    Price: $949.00 (USD) 
    The best all-around Recaro race seat. The Profi line of seats are fixed-back fiberglass with slots for racing harnesses. It's fully FIA approved which makes it suitable for nearly all ranges of racing series or for a track-only car. The sizing and shape of this seat makes it suitable for smaller drivers. This is a side-mount design and requires side mount brackets and vehicle-specific floor adapter. Sliders and additional seat cushions optional.

    Seat Specs:
    Shell Materialfiberglass-reinforced plastic
    fabric materialvelour
    fabric colorsblack, red
    logo colorwhite or black depending on seat color
    harness guidesYes for 4, 5, or 6 point
    seat mountside mount, not included
    slidersnot included
    chassis mountsnot included
    Part #: RECARO-PROFI
    Price: $999.00 (USD) 
    The Sportster CS seat is everything you wanted in a street sport seat. This seat doesn't just look cool - it's also a functional ergonomic improvement. This seat goes above and beyond any standard BMW seat to grip your body and keep you planted in the seat. Your whole body is supported - aggressive side and hip bolsters combine with wide shoulder supports and integrated headrest to properly support and protect your body during extreme driving. But Recaro has also focused on comfort by contouring the backrest to the natural shape of the human spine. The padding is thick and dense and the seat cushion has a built-in shock absorbing design. This seat will accept a standard 3-point seatbelt as well as a 4-point harness. The backrest folds forward for easy access to rear seats in a coupe body. The Sportster CS is the obvious choice, even for manufacturers like BMW, for a premium and functional ultra-sport seat.

    Feedback from a Sportster CS user: "The phenomenological aspect that struck me the most, however, is just how much more a part of the car you feel when you are harnessed into these seats! I got a thrill from driving that I haven't had since I was in high school! It was that dramatic a change. The stock seats now seem like puffy cushions that float in disconnected fashion from the car and its movements. With the Recaros, you are one with the Beast. If I had known how dramatic a difference they would make, they would have been the first mod I made, without a doubt."

    Seat Specs:
    shell materialsteel base with composite backrest
    fabric materialstandard: cloth or vinyl
    fabric colorsblack
    logo colorgrey
    harness guidesYes, for 3 or 4 point
    seat adjustmentsbackrest angle, fore-aft (with optional sliders)
    seat mountbottom mount, adapter bracket included
    slidersnot included
    chassis mountsnot included
    Fitment notes:
  • This is a bottom-mount seat with a Recaro seat adapter included. A vehicle-specific floor adapter plate is still required. This seat will attach to either a set of sliders or be fixed in place directly to the floor plate (non adjustable).
  • This seat is designed mainly for street use. However, depending on the car model, various modifications and fabrication may be required to retain any of the original seat features. This is more of an issue on newer cars with integraged occupancy sensors, power, seat memory settings, air bags, etc. Professional installation, or detailed knowledge, on newer cars is strongly recommended. We also recommend custom installation to gain the ideal seating position for your tastes.
  • Part #: TMS21549
    Price: $1499.00 (USD) 
    The Recaro Sport seat is the closest to an OEM-type of tuning seat you will find on the market. The Sport features comfort and luxorious materials combined with the same form fitting and embracing seat design as the Recaro motorsport seats. This is the seat that focuses most on comfort with an innovative spine support system, generous seat padding, and a wide range of fabric options. The lumbar pad on the front of the seat is fore-aft adjustable which is a great convenience for taller drivers. And the hip and side bolsters are tall to snugly hold you in place. It's a tuning seat, compatible with the standard 3-point belt, as well as pass-throughs for a 4-point harness.

    Seat Specs:
    shell materialsteel
    fabric materialstandard: cloth, vinyl; optional materials: leather, suede, saturn, velour
    fabric colorsstandard: black, grey; custom colors available
    logo colorsilver
    harness guidesYes, for 3 or 4 point
    seat adjustmentsbackrest angle, lumbar, fore-aft (with optional sliders)
    seat mountbottom mount
    slidersnot included
    chassis mountsnot included
    Fitment notes:
  • This is a bottom-mount seat and seat adapters are not included. A vehicle-specific floor adapter plate is required. The seat will attach to either a set of sliders or be fixed in place directly to the floor plate (non adjustable).
  • This seat is designed mainly for street use. However, depending on the car model, various modifications and fabrication may be required to retain any of the original seat features. This is more of an issue on newer cars with integraged occupancy sensors, power and heat, seat memory settings, air bags, etc. Professional installation, or detailed knowledge, on newer cars is strongly recommended. We also recommend custom installation to gain the ideal seating position for your tastes.
  • Part #: RECARO-SPORT
    Price: $1359.00 (USD) 
    The Cross Sportster CS seat is everything you wanted in a high quality street tuner seat. This seat doesn't just look cool - it's also a functional ergonomic improvement. The Cross Sportster is similar to the legendary Sportster CS but with smaller hip bolsters to make ingress/egress easier. All of the other features of the Sportster CS carry over - aggressive side bolsters, wide shoulder supports and integrated headrest to properly support and protect your body during spirited driving. This seat also features a heated element in the base (with its own switch) on vinyl and leather materials. Recaro has also focused on comfort by contouring the backrest to the natural shape of the human spine. The padding is thick and dense and the seat cushion has a built-in shock absorbing design. This seat will accept a standard 3-point seatbelt as well as a 4-point harness. The backrest folds forward for easy access to rear seats in a coupe body.

    Feedback from a Sportster CS user: "The phenomenological aspect that struck me the most, however, is just how much more a part of the car you feel when you are harnessed into these seats! I got a thrill from driving that I haven't had since I was in high school! It was that dramatic a change. The stock seats now seem like puffy cushions that float in disconnected fashion from the car and its movements. With the Recaros, you are one with the Beast. If I had known how dramatic a difference they would make, they would have been the first mod I made, without a doubt."

    Seat Specs:
    shell materialsteel base with composite backrest
    fabric materialstandard: cloth or vinyl; optional: vinyl, leather
    fabric colorsstandard: black; optional: red, silver
    logo colorgrey, silver, red, black
    harness guidesYes, for 3 or 4 point
    seat adjustmentsbackrest angle, fore-aft (with optional sliders)
    seat mountbottom mount, adapter bracket included
    slidersnot included
    chassis mountsnot included
    Fitment notes:
  • This is a bottom-mount seat with a Recaro seat adapter included. A vehicle-specific floor adapter plate is still required. This seat will attach to either a set of sliders or be fixed in place directly to the floor plate (non adjustable).
  • This seat is designed mainly for street use. However, depending on the car model, various modifications and fabrication may be required to retain any of the original seat features. This is more of an issue on newer cars with integraged occupancy sensors, power and heat, seat memory settings, air bags, etc. Professional installation, or detailed knowledge, on newer cars is strongly recommended. We also recommend custom installation to gain the ideal seating position for your tastes.
  • Part #: TMS212715
    Price: $3198.00 (USD) 
    Recaro makes their own floor adapter and slider kit for some BMW models. This is the most complete and OEM-like way of installing a Recaro street (bottom-mount) seat in your car.

    Each Recaro kit comes with a floor mount adapter specific and correct for the chassis. In some cases they even use an OE BMW seat frame. The kit also includes Recaro sliders to bolt to the floor mount and brackets for re-mounting your original seatbelt receptacle. Your bottom mount seat then bolts to the sliders. All hardware and instructions are included. On some models additional trim is also included to hide the sliders and brackets and make for a more factory OEM appearance.

    Note about fitment: the Recaro adapters tend to be higher than a Macht Schnell or other 'matrix' style floor mount designs. In most cases the Recaro is over one inch taller. This owes in part because Recaro builds additional room for the feet of rear seat passengers and in some cases they use the OE seat frame. If you're an above average height or want the seats to be as low as possible, the Macht Schnell floor mounts would be a better option.

    Sold per seat. Choose Left or Right in the options list below.

    This item fits the following BMWs:
    1992-1998 E36 BMW 318i 318is 318ti 323is 325i 325is 328i 328is M3 except convertible models
    Part #: TMS176960
    Price: $375.00 (USD) 
    Racing and aftermarket seats require a mount to attach the seat to sliders or an adapter plate for the car. Most Recaro race seats are 'side-mount' which means the brackets attach to the side of the seat and then turn 90 degrees to mount to the floor (or sliders). These are made by Macht Schnell and made from steel for great strength and low cost. Sold as a pair to fit one seat. Fits the Recaro Pole Position, Profi, Profi XL, and Pro Racer seats.
    Part #: 79.20.110B
    Price: $125.00 (USD) 
    Save over $400 - Warehouse Clearance - Open Box - Customer Cancelled Order

    Recaro's safest racing seat! The Pro Racer HANS is designed to be fully compatible with the HANS safety system. The Pro Racer features more sculpting to the shell to allow more clearance between the seat and the HANS device around your neck and chest. Some other seats can push on the HANS and make it uncomfortable when it should be nearly transparent. This is also one of the most enclosing and protective seats on the market. Not only does it feature the integrated head protection, the side bolsters are taller than most seats and the shoulders feature an anti-slip surface to keep your body in place. But apart from being safe, this seat is comfortable too!

    This seat is available in the standard sizing as well as an optional XL size. See dimensions chart to the right.

    Pro Racer HANS Seat Specs:
    Shell MaterialKevlar carbon-fiber composite
    fabric materialvelour
    fabric colorsblack
    logo colorwhite
    harness guidesYes for 4, 5, or 6 point
    seat mountside mount, not included
    slidersnot included
    chassis mountsnot included

    Part #: 071.44.0630
    Price: $3129.00 (USD) 
    The Recaro Pole Position racing seat requires a mount to afix the seat to the chassis of the car. Most Recaro seats are 'side-mount' which means the brackets attach to the side of the seat and then turn 90 degrees to mount to the floor (or sliders). These are genuine Recaro side mounts that are FIA-certified for optimum safety and security. Many racing organizations require an FIA-approved mount. Sold as a pair with hardware included.The Recaro Pole Position racing seat requires a mount to afix the seat to the chassis of the car. Most Recaro seats are 'side-mount' which means the brackets attach to the side of the seat and then turn 90 degrees to mount to the floor (or sliders). These are genuine Recaro side mounts that are FIA-certified for optimum safety and security. Many racing organizations require an FIA-approved mount. Sold as a pair with hardware included.
    Part #: 7223825
    Price: $125.00 (USD) 
    Quantity:   
    Often when installing race seats there is a gap between your seat shell to your side brackets. Or maybe you want to shim your seat to one side for a better driving position. These aluminum spacer shims are the perfect solution. They come in a satin black anodize for a stealthy look and include longer hardware in a handy low-profile rounded head.

    Included in this set:
    2 x 14mm shims with correct extended bolts
    4 x 9mm shims with correct extended bolts
    2 x 5mm shims with correct extended bolts
    4 x washers

    These are the ideal finishing touch to your seat install and the preferred method instead of using unsightly washers.

    Turner Tip: Positioning the seat close to the transmission tunnel can make it extremely difficult to attach an Allen socket/ratchet. And the Allen socket has to be firmly seated or it will strip the head. We will often use hex bolts on the inside seat locations because it is so much easier. Just make sure you get a hex that is the same grade as the original seat hardware.
    Part #: TMS25774
    Price: $59.00 (USD) 
    Quantity:   
    In order to mount aftermarket seats in your car, you need a floor mount adapter. These high-quality aluminum adapters are made by Macht Schnell. These bolt to your existing seat mounting studs in the floor and offer the lowest profile of any floor mount (22mm height). This helps to keep your seat at the lowest position possible. Your seat adapters or sliders bolt to this adapter plate. These floor mounts are a matrix style with rows of threaded holes that allow you to find an ideal seat location. There are other options - including homemade - but these seat brackets for your BMW are the highest quality to match your expensive seats.

    Sold per seat. Can be used on left or right sides of vehicle.

    These adapters were originally designed for the E46 chassis. They can fit the E36 by modifying the mounting holes to match the bolt and stud locations on the E36 floor.

    This item fits the following BMWs:
    1995-1999  E36 BMW  318i 318is 318ti 318i 323is 323i 325i 325is 325i 328i 328is 328i M3 (except convertibles) ( see note above )
    1999-2005  E46 BMW  323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3 (except convertibles)
    2003-2008  E85 E86 BMW  Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
    Part #: 79.10.101B
    Price: $225.00 (USD) 
    Quantity:   
    The Recaro Flexible Adaptor seat mounts are the most robust and stout slider mounts we have seen. The Flexible Adapter mounts are a reinforced side mount + slider assembly intended for pro endurance racing. These are the first FIA-certified seat sliders. They have extra reinforcing braces on the front and rear which takes away a lot of the lateral motion from traditional un-reinforced side mount brackets. As racecars see more lateral loading from high downforce and stickier tires the seat naturally wants to flex even more. This extra strength seat slider/mount combination is just the thing to keep you planted in place. Even the slider hand bar is overbuilt and bright red for to grab your attention. These have been designed by Recaro specifically for endurance races where driver changes need to be done in seconds.

    This slider + mount system only works with the Recaro Pro Racer SPA/SPG seats. Choose from the standard size or XL version.
    Part #: PR0RACERFLEXADAP
    Price: $549.00 (USD) 
    The best all-around Recaro race seat. The Profi SPA seat is fixed-back Kevlar with slots for racing harnesses. It's fully FIA approved which makes it suitable for nearly all ranges of racing series or for a track-only car. The sizing and shape of this seat makes it suitable for smaller drivers. This is a side-mount design and requires side mount brackets and vehicle-specific floor adapter. Sliders and additional seat cushions optional.

    Seat Specs:
    Shell MaterialKevlar carbon-fiber composite
    fabric materialvelour
    fabric colorsblack
    logo colorwhite
    harness guidesYes for 4, 5, or 6 point
    seat mountside mount, not included
    slidersnot included
    chassis mountsnot included

    Part #: TMS340419
    Price: $2399.00 (USD) 
    Recaro's safest racing seat! The Pro Racer HANS is designed to be fully compatible with the HANS safety system. The Pro Racer features more sculpting to the shell to allow more clearance between the seat and the HANS device around your neck and chest. Some other seats can push on the HANS and make it uncomfortable when it should be nearly transparent. This is also one of the most enclosing and protective seats on the market. Not only does it feature the integrated head protection, the side bolsters are taller than most seats and the shoulders feature an anti-slip surface to keep your body in place. But apart from being safe, this seat is comfortable too!

    This seat is available in the standard sizing as well as an optional XL size. See dimensions chart to the right.

    Pro Racer HANS Seat Specs:
    Shell Materialfiberglass-reinforced plastic
    fabric materialvelour
    fabric colorsblack
    logo colorwhite
    harness guidesYes for 4, 5, or 6 point
    seat mountside mount, not included
    slidersnot included
    chassis mountsnot included

    Part #: TMS340416
    Price: $1499.00 (USD) 
    If you want fore-aft adjustment on your Recaro seat you will need a set of sliders. These are the genuine Recaro sliders that are some of the finest quality that we have seen. The sliders fit between the vehicle adapter and the seat brackets. There are two types depending on how your floor adapters work - without tabs and with tabs.

    Recaro Seat Slider types -
    Without Tabs - offers the lowest possible seating position - the total height of the sliders is 22mm (7/8"); the sliders are sandwiched between the floor mount and seat; the bolts install to the floor mount perpendicular to the ground; works with flat Macht Schnell or VAC style floor mounts only.
    With Tabs - the sliders have tabs on each end with three height positions; the positions allow height and rake adjustments but means it's taller than the version without tabs - total height with the tabs is 58mm (2.25"); the tabs mean the mounting bolts install parallel to the ground; some floor mounts require the tab style (Wedge Engineering for example).

    The Recaro sliders are all steel - pulling the handle moves teeth on two tracks which is more secure and stable than a single track. This set of sliders has the bar on the inside of the track (the most common for BMW fitments).

    Sold per seat.
    Part #: 0.70.X
    Price: $135.00 (USD) 
    The best all-around Recaro race seat. The Profi line of seats are fixed-back fiberglass with slots for racing harnesses. It's fully FIA approved which makes it suitable for nearly all ranges of racing series or for a track-only car. The sizing and shape of this seat makes it suitable for drivers of all shapes and sizes. This is the larger XL seat that is over one inch larger in the torso area than the standard Profi SPG seat. This is a side-mount design and requires side mount brackets and vehicle-specific floor adapter. Sliders and additional seat cushions optional.

    Seat Specs:
    Shell Materialfiberglass-reinforced plastic
    fabric materialvelour
    fabric colorsblack, red
    logo colorwhite or black depending on seat color
    harness guidesYes for 4, 5, or 6 point
    seat mountside mount, not included
    slidersnot included
    chassis mountsnot included
    Part #: TMS340420
    Price: $1099.00 (USD) 
    Racing and aftermarket seats require a mount to afix the seat to the chassis of the car. Most Recaro seats are 'side-mount' which means the brackets attach to the side of the seat and then turn 90 degrees to mount to the floor (or sliders). These are genuine Recaro side mounts that are FIA-certified for optimum safety and security. Many racing organizations require an FIA-approved mount. Sold as a pair with hardware included. Choose from standard steel or light weigt aluminum.
    Part #: 7207xxxx
    Price: $125.00 (USD) 
    These little guys are one of our favorite final touches on a race car build. After years of requests, we now are able to supply these for more than just our race team's use. These aluminum collars bolt on your roll cage's harness bar (or any bar for that matter) and help keep your seat belt harnesses from sliding on the bar. You can use just one pair to accomplish this, or 2 pairs (4 collars total) for the best looking and functioning install. The beauty of these collars (besides being lightweight and looking clean) is that they can be adjusted from side to side, which is convenient if you change you seat or belt configuration. They can also be used for other applications as well, such as taming that helmet net strap. If you're looking for a clean, professional looking solution, these are a superb final touch. As used on our own Championship winning TMS E46 and E90 race cars.

    We offer these guide collars in two sizes: for 1.5" OD roll bar tubing or for 1.75" OD roll bar tubing (choose your size below). Check your cage tubing diameter especially if your car was built in Europe as they used metric tubing sizes. If you need a metric size, contact us. Also measure with paint applied, not bare tubing. These are sold by the pair, so be sure to modifying your quantity below (or in the cart) if you need them for both seats.
    Part #: TIN9903150
    Price: $39.95 (USD) 
    The Sportster CS seat is everything you wanted in a street sport seat. This seat doesn't just look cool - it's also a functional ergonomic improvement. This seat goes above and beyond any standard BMW seat to grip your body and keep you planted in the seat. Your whole body is supported - aggressive side and hip bolsters combine with wide shoulder supports and integrated headrest to properly support and protect your body during extreme driving. But Recaro has also focused on comfort by contouring the backrest to the natural shape of the human spine. The padding is thick and dense and the seat cushion has a built-in shock absorbing design. It also has a heated bottom cushion for additional added comfort (only on vinyl and leather materials). This seat will accept a standard 3-point seatbelt as well as a 4-point harness. The backrest folds forward for easy access to rear seats in a coupe body. The Sportster CS is the obvious choice, even for manufacturers like BMW, for a premium and functional ultra-sport seat.

    Feedback from a Sportster CS user: "The phenomenological aspect that struck me the most, however, is just how much more a part of the car you feel when you are harnessed into these seats! I got a thrill from driving that I haven't had since I was in high school! It was that dramatic a change. The stock seats now seem like puffy cushions that float in disconnected fashion from the car and its movements. With the Recaros, you are one with the Beast. If I had known how dramatic a difference they would make, they would have been the first mod I made, without a doubt."

    Seat Specs:
    shell materialsteel base with composite backrest
    fabric materialstandard: cloth or vinyl; optional: vinyl, leather
    fabric colorsstandard: black; optional: red, silver
    logo colorgrey, silver, red, black
    harness guidesYes, for 3 or 4 point
    seat adjustmentsbackrest angle, fore-aft (with optional sliders)
    seat mountbottom mount, adapter bracket included
    slidersnot included
    chassis mountsnot included
    Fitment notes:
  • This is a bottom-mount seat with a Recaro seat adapter included. A vehicle-specific floor adapter plate is still required. This seat will attach to either a set of sliders or be fixed in place directly to the floor plate (non adjustable).
  • This seat is designed mainly for street use. However, depending on the car model, various modifications and fabrication may be required to retain any of the original seat features. This is more of an issue on newer cars with integraged occupancy sensors, power and heat, seat memory settings, air bags, etc. Professional installation, or detailed knowledge, on newer cars is strongly recommended. We also recommend custom installation to gain the ideal seating position for your tastes.
  • Part #: TMS212713
    Price: $4458.00 (USD) 
    The Cross Sportster CS seat is everything you wanted in a high quality street tuner seat. This seat doesn't just look cool - it's also a functional ergonomic improvement. The Cross Sportster is similar to the legendary Sportster CS but with smaller hip bolsters to make ingress/egress easier. All of the other features of the Sportster CS carry over - aggressive side bolsters, wide shoulder supports and integrated headrest to properly support and protect your body during spirited driving. Recaro has also focused on comfort by contouring the backrest to the natural shape of the human spine. The padding is thick and dense and the seat cushion has a built-in shock absorbing design. This seat will accept a standard 3-point seatbelt as well as a 4-point harness. The backrest folds forward for easy access to rear seats in a coupe body.

    Feedback from a Sportster CS user: "The phenomenological aspect that struck me the most, however, is just how much more a part of the car you feel when you are harnessed into these seats! I got a thrill from driving that I haven't had since I was in high school! It was that dramatic a change. The stock seats now seem like puffy cushions that float in disconnected fashion from the car and its movements. With the Recaros, you are one with the Beast. If I had known how dramatic a difference they would make, they would have been the first mod I made, without a doubt."

    Seat Specs:
    shell materialsteel base with composite backrest
    fabric materialstandard: cloth or vinyl
    fabric colorsblack
    logo colorgrey
    harness guidesYes, for 3 or 4 point
    seat adjustmentsbackrest angle, fore-aft (with optional sliders)
    seat mountbottom mount, adapter bracket included
    slidersnot included
    chassis mountsnot included
    Fitment notes:
  • This is a bottom-mount seat with a Recaro seat adapter included. A vehicle-specific floor adapter plate is still required. This seat will attach to either a set of sliders or be fixed in place directly to the floor plate (non adjustable).
  • This seat is designed mainly for street use. However, depending on the car model, various modifications and fabrication may be required to retain any of the original seat features. This is more of an issue on newer cars with integraged occupancy sensors, power, seat memory settings, air bags, etc. Professional installation, or detailed knowledge, on newer cars is strongly recommended. We also recommend custom installation to gain the ideal seating position for your tastes.
  • Part #: TMS212714
    Price: $3558.00 (USD) 
    Famous Recaro brand quality in an entry level seat! The Recaro Pole Position is a fixed-back fiberglass shell with slots for racing harnesses. It's fully FIA approved which makes it suitable for nearly all ranges of racing series or for a track-only car. The sizing and shape of this seat is best-suited for small-medium sized drivers. This is a side-mount design and requires side mount brackets and vehicle-specific floor adapter. Sliders and additional seat cushions optional.

    Seat Specs:
    Shell Materialfiberglass-reinforced plastic
    fabric materialvelour
    fabric colorsblack, blue, red
    logo colorwhite or black depending on seat color
    harness guidesYes for 4, 5, or 6 point
    seat mountside mount, not included
    slidersnot included
    chassis mountsnot included
    Part #: TMS21541
    Price: $899.00 (USD) 
    In order to mount aftermarket seats in your car, you need a floor mount adapter. These high-quality aluminum adapters are made by Macht Schnell. These bolt to your existing seat mounting studs in the floor and offer the lowest profile of any floor mount (22mm height). This helps to keep your seat at the lowest position possible. Your seat adapters or sliders bolt to this adapter plate. These floor mounts are a matrix style with rows of threaded holes that allow you to find an ideal seat location. There are other options - including homemade - but these seat brackets for your BMW are the highest quality to match your expensive seats.

    Sold per seat. Can be used on left or right sides of vehicle.

    These adapters were originally designed for the E46 chassis. They can fit the E36 by modifying the mounting holes to match the bolt and stud locations on the E36 floor.

    This item fits the following BMWs:
    1995-1999 E36 BMW 318i 318is 318ti 318i 323is 323i 325i 325is 325i 328i 328is 328i M3 (except convertibles) ( see note above )
    1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3 (except convertibles)
    2003-2008 E85 E86 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
    Part #: TMS21542
    Price: $225.00 (USD) 
    Quantity:   
    Many racing series and event organizers are requiring 5 or 6-point harnesses in their events now. Attaching the anchor points to the seat base is a desired alternative to drilling holes in your floor and carpet*. This set includes the 6-point anchor to attach to the Macht Schnell floor mount as well as side attachments for either a bolt-in or snap-in harness.

    * - note that most racing harness manufacturers will advise that drilling through the floor is the best method for mounting harnesses. This allows you to locate the mount in the ideal location and angle to fit your driving position. The proper installation is paramount to ensure the harness works correctly in an impact.

    Sold per seat.

    This item fits the following BMWs:
    2008-2012 E82 BMW 128i 135i 1M Coupe
    1992-1998 E36 BMW 318i 318is 318ti 323is 325i 325is 328i 328is M3
    1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3 (not convertibles)
    2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
    2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
    2007-2013 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
    2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
    Part #: 79.20.150K
    Price: $174.00 (USD) 
    Motion Motorsport takes the struggle out of centering your race seat with their exclusive SLOTTED side bracket mounts. These side mounts bolt to your seat shell just like any other side mount. But the bottom bolts to your sliders or floor mount through their innovative slotted inserts. There's no more re-drilling or hogging out holes to get everything to line up. Loosely install the brackets, center your seat, then tighten the screws on the brackets. You won't have to pull the seat in and out while you make tiny adjustments. The rotating slotted design allows the brackets to 'float' into the position you want. And once tightened they will not move or come out of position. These brackets have been thoroughly tested with all FIA-spec seats for bolt spacing, most common seat sliders, and compatible with matrix-style and other floor mount designs. The aluminum material meets or exceeds all FIA recommendations and are powdercoated in matte black.

    One other trick feature is the driver and passenger specific offsets to the brackets. The bends are made to place the seat as close to the transmission tunnel as possible (also dependent on floor mount design). Most other side mounts are universal and actually the same piece flipped around with the proper holes drilled. But this does not offset the seat at all and you can end up with an annoying offset from the center of the seat to the steering wheel. Choose from a driver's or passenger's side bracket set below.

    Price is for one pair of side mounts.
    Part #: MM-SIDE-
    Price: $129.95 (USD) 
    The Recaro Sport Topline seat is the closest to an OEM-type of tuning seat you will find on the market. The Sport features comfort and luxorious materials combined with the same form fitting and embracing seat design as the Recaro motorsport seats. This is the seat that focuses most on comfort with an innovative spine support system, generous seat padding, and a wide range of fabric options. The lumbar pad on the front of the seat is fore-aft adjustable which is a great convenience for taller drivers. And the hip and side bolsters are tall to snugly hold you in place. It's a tuning seat, compatible with the standard 3-point belt, as well as pass-throughs for a 4-point harness.

    The Sport Topline seat also features power adjustments for the height and tilt as well as climate control (seat venting and heating).

    Seat Specs:
    shell materialsteel
    fabric materialstandard: cloth; optional: leather, suede, vinyl
    fabric colorsstandard: black, grey; optional: blue, red, beige
    logo colorbeige, silver, red, black
    harness guidesYes, for 3 or 4 point
    seat adjustmentsbackrest angle, lumbar, hight (electric), tilt (electric), fore-aft (with optional sliders)
    seat mountbottom mount
    slidersnot included
    chassis mountsnot included
    Fitment notes:
  • This is a bottom-mount seat and seat adapters are not included. A vehicle-specific floor adapter plate is required. The seat will attach to either a set of sliders or be fixed in place directly to the floor plate (non adjustable).
  • This seat is designed mainly for street use. However, depending on the car model, various modifications and fabrication may be required to retain any of the original seat features. This is more of an issue on newer cars with integraged occupancy sensors, power and heat, seat memory settings, air bags, etc. Professional installation, or detailed knowledge, on newer cars is strongly recommended. We also recommend custom installation to gain the ideal seating position for your tastes.
  • Part #: TMS22147
    Price: $2059.00 (USD) 
    Recaro's safest racing seat! The Pro Racer HANS is designed to be fully compatible with the HANS safety system. The Pro Racer features more sculpting to the shell to allow more clearance between the seat and the HANS device around your neck and chest. Some other seats can push on the HANS and make it uncomfortable when it should be nearly transparent. This is also one of the most enclosing and protective seats on the market. Not only does it feature the integrated head protection, the side bolsters are taller than most seats and the shoulders feature an anti-slip surface to keep your body in place. But apart from being safe, this seat is comfortable too!

    This seat is available in the standard sizing as well as an optional XL size. See dimensions chart to the right.

    Pro Racer HANS Seat Specs:
    Shell MaterialKevlar carbon-fiber composite
    fabric materialvelour
    fabric colorsblack
    logo colorwhite
    harness guidesYes for 4, 5, or 6 point
    seat mountside mount, not included
    slidersnot included
    chassis mountsnot included

    Part #: TMS22128
    Price: $3029.00 (USD) 
    Adding seats and keeping your stock 3-point belt? You're going to need this set of brackets to attach the old belt receptacle to the new floor mount. Nearly all BMW seats have the inboard belt buckle attached to the seat. So you will need to remove that buckle and transfer it to your new floor bracket. If you're using the Macht Schnell floor brackets these plates mount in between the sliders and seat. They are made from thick steel then powedercoated in stealthy black. These are sold as a pair to fit one seat and the Macht Schnell floor mounts (may require modification for use on other brand floor mounts). Fits most coupe or sedan models from 1992-2012, including E36, E46, E82, E9X, and Z4 models.

    Sold per seat.

    This item fits the following BMWs:
    2008-2012 E82 BMW 128i 135i 1M Coupe
    1992-1998 E36 BMW 318i 318is 318ti 323is 325i 325is 328i 328is M3
    1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3 (not convertibles)
    2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
    2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
    2007-2013 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
    2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
    Part #: 79.12.12X
    Price: $99.95 (USD) 
    Get notified about money saving
    specials & deals for your BMW
    enter your email address
  • 22 years of BMW Tuning.
  • Award winning service.
  • 10,000's of parts in stock.
  • Quality BMW Parts only.
  • Hassle-free returns.

  • Find us on Facebook




    • 1-800-280-6966
      Mon-Thur 9am-6pm ET, Fri 9am-5pm ET

      • © TurnerMotorsport.com 1993-2016. All Rights Reserved.