click to Chat Live
Contact YouTube Blog Twitter facebook Turner Motorsport on Instagram
1-800-280-6966
 |   Login
  • 0
 |   Login
Shopping Cart (0) Wishlist
Contact

(0) item(s) in your Shopping Cart
Home
Categories
Specials Gifts & Clothing
  1. Genuine BMW Accessories
  2. Genuine BMW Clothing
  3. Turner Shirts Hats and Gear
  4. Gifts under $25
  5. Gifts under $50
  6. Gifts under $100
  7. Gifts over $100
  8. Gift Certificates
  9. Stocking Stuffers
  10. Gift Packages
Brakes
  1. Brake Overhaul Packages
  2. Brake Pads
  3. Brake Pad Sensors
  4. Brake Rotors
  5. StopTech Big Brake Kits
  6. Brembo Big Brake Kits
  7. Stainless Steel Brake Lines
  8. Brake Fluid
  9. Brake Calipers
  10. Caliper Rebuild Kits
  11. Parking Brake Parts
  12. Brake Master Cylinders
  13. ABS/DSC System Parts
  14. Brake Cooling Ducts & Backing Plates
  15. Brake Pads - Brembo GT BBK Calipers
  16. Brake Pads - StopTech BBK Calipers
Car Care & Accessories
  1. Car Covers
  2. Wheel & Tire Cleaning
  3. Wax, Polish and Cleaning Supplies
  4. Detailing Gear
  5. Leather & Plastic Care
  6. Car Cleaning Supplies
  7. Chassis Paint, Coatings, Sealants, and Rust Conversion
Drivetrain
  1. Differential and Gearing Upgrades
  2. Differential Mounts and Upgrades
  3. OEM Clutch Kits & Clutch Parts
  4. Performance Clutch Kits & Parts
  5. Lightweight Aluminum Flywheel Upgrades
  6. Stock OEM Dual Mass Flywheels
  7. Stainless Steel Clutch Lines
  8. Clutch Parts
  9. UUC Short Shift Kits
  10. Axle Shafts
  11. Driveshafts
  12. B&M Short Shifters
  13. Performance Short Shift Kits
  14. UUC DSSR - Double Sheer Selector Rod
  15. Drivershaft Center Support Bearings
  16. Flex Discs & Guibos
  17. Transmission Mounts
  18. Transmission Parts
Engine Chips
  1. Performance Chips, 1986-1995 Models
  2. Shark Injector Performance Software, 1996-2005 Models
Engine Parts
  1. Engine Performance Packages
  2. Cam Sprockets & Gears
  3. Water Pumps
  4. Thermostats
  5. Radiators & Cooling System Overhaul Kits
  6. Oil Pan Baffles
  7. Radiator Hoses, Cooling Hoses, & Hose Sets
  8. Engine Fans & Fan Clutches
  9. Underdrive Power Pulleys
  10. Camshafts
  11. Schrick Performance Camshafts
  12. External Engine Parts
  13. Drive Belts & V-Belts
  14. Gaskets, Gasket Sets, Seals, & O-Rings
  15. Crankcase Vent, PCV, and Oil Separator Systems
  16. Motor Mounts
  17. Electrical Sensors, Switches, & Relays
  18. Ignition Parts
  19. Alternator & Alternator Parts
  20. Starter Motors & Starter Parts
  21. Fuel System Parts
  22. Internal Engine Parts
  23. Cylinder Head Parts & Head Bolts
  24. VANOS Units & Parts
  25. Rod Bearing Kits
  26. Oil Coolers & Oil Cooler Parts
Exhaust
  1. Supersprint Performance Exhaust Systems
  2. Performance Headers & Downpipes
  3. Borla Performance Exhaust Systems
  4. Corsa Performance Exhaust Systems
  5. Dinan Free Flow Exhaust Systems
  6. OEM Replacement Mufflers and Exhaust Systems
  7. Exhaust System Upgrades
  8. Oxygen Sensor - O2 Sensors
  9. Exhaust Gaskets Hangers and Parts
Exterior / Body
  1. Black Grills
  2. Chrome Grills & Trim
  3. Emblems & Decals for Hood, Trunk, and Wheels
  4. Front Spoilers, Bumper Covers, & Air Dams
  5. Rear Spoilers, Rear Wings, & Aprons
  6. Body Trim Parts & Accessories
  7. Hood & Trunk Shocks, Struts
  8. License Plate Brackets & License Plate Frames
  9. Mirror Kits & Mirror Parts
  10. Window Regulators & Motors
  11. Wiper Blades, Wiper Pumps, & Wiper Motor Parts
  12. Hood Pins and AeroCatch Latches
  13. Racing Tow Hooks and Tow Straps
  14. Aero & Body Kits
Intake
  1. aFe Cold-Air Intake Kits
  2. Turbos & Active Autowerke Superchargers
  3. Dinan Cold Air Intake Kits
  4. Performance Intake Kits
  5. aFe Performance Air Filters
  6. K&N Performance Air Filters
  7. Replacement Cone Air Filters (for Cold Air Intakes)
  8. Intake Cleaning & Recharging Kits
  9. Intake Manifold Upgrades
  10. Intake Manifold Components (DISA, Vacuum, CCV, Etc)
  11. Mass Air Sensor & Air Flow Meters
  12. Intake Boots & Hoses
  13. Throttle Body Parts
Interior
  1. Floor Mats
  2. Gauge Kits and Data Acquisition
  3. Auxiliary Input Adaptors for BMW
  4. Pedal Sets
  5. Escort Radar Detectors
  6. Factory Steering Wheels
  7. Racing Steering Wheels
  8. Shift Knobs, Shift Boots, & Shift Handles
  9. Seats & Seat Accessories
  10. Seat Belts and Racing Harnesses
  11. Cup Holders and Storage
  12. Door Sill Strips
  13. Heating & Air Conditioning
  14. Interior Switches and Switchgear
  15. Sunshades & Windscreens
  16. Interior Trim & Accessories
Lighting
  1. Euro Clear Turn Signals, Parking Lights, & Tail Lights
  2. Turn Signals / Parking Lights
  3. Bulbs for Headlights, Turn Signals and Tail Lights
  4. Headlights, Headlight Lenses, & Headlight Parts
  5. Fog Lights, Fog Light Lenses, & Fog Light Parts
  6. Tail Lights
  7. Stealth Bulbs
Maintenance
  1. Routine Maintenance & Tune-Up Packages
  2. Oil Filters & Oil Filter Kits
  3. Air Filters
  4. Fuel Filters
  5. Cabin Air Filters, Heppa Filters, & Microfilters
  6. Transmission Filter Kits & Transmission Service Parts
  7. Ignition Coils
  8. Ignition Wires / Spark Plug Wires
  9. Spark Plugs
  10. Bentley Repair / Service Manuals
  11. Service Reset Tools & Fault Code Readers
  12. Anti-Freeze and Coolant
  13. Engine Oils - Genuine BMW and OEM
  14. Power Steering and Hydraulic Fluids
  15. Transmission and Gear Oil - Genuine BMW and OEM
  16. MOTUL Engine Oil and Gear Lubricants
  17. Red Line Oil & Fluids
  18. Liqui-Moly Oil and Additives
Suspension
  1. Shocks & Struts
  2. H&R Performance Springs
  3. Dinan Performance Springs
  4. H&R Cup Kit Shock & Spring Packages
  5. Spring & Shock Packages
  6. Turner / H&R Height Adjustable Spring Sets
  7. Bilstein PSS PSS9 PSS10 Coil Over Suspensions
  8. H&R Coil Over Suspensions
  9. KW Coil Over Suspensions
  10. ST Suspension Coilover Kits
  11. Turner Motorsport Racing Suspension Kits
  12. Chassis Reinforcement Kits & Parts
  13. Sway Bar Kits
  14. Sway Bar Links & Sway Bar Parts
  15. Camber / Caster Kits
  16. Strut Braces & Stress Bars
  17. Control Arm Replacements & Upgrades
  18. Suspension Bushings & Mounts
  19. Wheel Bearings & Hub Assemblies
  20. Steering Racks & Power Steering Pumps
  21. Tie Rods & Steering Parts
  22. Coil Over Spring Hardware
Wheels
  1. Apex Flow Formed Alloy Wheels
  2. Forgeline Custom Forged Alloy Wheels
  3. HRE FlowForm Performance Alloy Wheels
  4. D Force Flow Formed Alloy Wheels
  5. Original BMW Wheels and Wheel Upgrades
  6. Turner Motorsport Wheel Spacers
  7. ECS Tuning Wheel Spacers
  8. H&R Wheel Spacers
  9. Wheel Bolts, Wheel Studs and Nuts
  10. Wheel Emblems, Caps, and Accessories
Tools
  1. Alignment Tools
  2. Battery Chargers and Tenders
  3. Brake Tools
  4. Clutch Alignment Tools
  5. Coil Over Wrenches
  6. Cylinder Head and VANOS Tools
  7. Fan and Fan Clutch Tools
  8. Fault Code Readers and OBD Scan Tools
  9. Fuel System Tools
  10. Genuine BMW Tool Kits
  11. Oil Service Tools
  12. Sockets
  13. Spark Plug Sockets
  14. Transmission and Differential Tools
  15. Wheel Pin Tools
  16. Workshop Chemicals
Clearance
Choose BMW
BMW 1 Series
  1. (E82) 1-series Coupe 2008+
  2. (E88) 1-series Convertible 2008+
BMW 2 Series
  1. (F22) 2-Series Coupe 2014+
  2. (F23) 2-Series Convertible 2014+
  3. (F87) M2 2016+
BMW 3 Series
  1. (E21) 3-Series 1977-1983
  2. (E30) 3-series 1984-1991
  3. (E30) M3 1988-1991
  4. (E36) 3-series 1992-1999
  5. (E36) M3 1995-1999
  6. (E46) 3-Series 1999-2005
  7. (E46) M3 2001-2006
  8. (E90) 3-Series Sedan 2006-2011
  9. (E90) M3 Sedan 2008-2013
  10. (E91) 3-Series Touring 2006-2013
  11. (E92) 3-Series Coupe 2007-2013
  12. (E92) M3 Coupe 2008-2013
  13. (E93) 3-Series Convertible 2007-2013
  14. (E93) M3 Convertible 2008-2013
  15. (F30) 3-Series Sedan 2012+
  16. (F31) 3-Series Touring 2014+
  17. (F80) M3 2015+
  18. (F34) 3-Series Gran Turismo 2014+
BMW 4 Series
  1. (F32) 4-Series Coupe 2014+
  2. (F33) 4-Series Convertible 2015+
  3. (F34) 4-Series Gran Turismo 2014+
  4. (F82) M4 Coupe 2015+
  5. (F83) M4 Convertible 2015+
  6. (F36) 4-Series Gran Coupe 2015+
BMW 5 Series
  1. (E34) M5 1991-1993
  2. (E39) M5 2000-2003
  3. (E60) M5 2006-2010
  4. (E28) 5-Series 1982-1988
  5. (E34) 5-Series 1989-1995
  6. (E39) 5-Series 1996-2003
  7. (E60) 5-Series Sedan 2004-2010
  8. (E61) 5-Series Touring 2006-2010
  9. (F10) 5-Series 2011+
  10. (G30) 5-Series 2017+
BMW 6 Series
  1. (E24) 6-Series 1977-1989
  2. (E63) 6-Series Coupe 2004-2010
  3. (E64) 6-Series Convertible 2004-2010
  4. (F06) 6-Series Gran Coupe 2013+
  5. (F12) 6-Series Coupe 2011+
  6. (F13) 6-Series Convertible 2011+
BMW 7 Series
  1. (E32) 7-Series 1988-1994
  2. (E38) 7-Series 1995-2001
  3. (E65) 7-Series SWB 2002-2007
  4. (E66) 7-Series LWB 2002-2007
  5. (F01) 7-Series SWB 2009+
  6. (F02) 7-Series LWB 2009+
BMW 8 Series BMW Classics (E9, Bavaria, Isetta, etc)
  1. 2500
  2. 2800
  3. 3.0Si
  4. Bavaria
  5. 2800CS
  6. 3.0CS
  7. 2002
  8. 2002tii
  9. (E12) 528i 1977-1981
  10. (E12) 530i 1975-1978
BMW X Series (SAV)
  1. (E84) X1 Series 2013+
  2. (E83) X3 2004-2010
  3. (F25) X3 2011+
  4. (F26) X4 2015+
  5. (E53) X5 2000-2006
  6. (E70) X5 2007-2013
  7. (F15) X5 2014+
  8. (F85) X5 M 2015+
  9. (E71) X6 2008+
  10. (F16) X6 2015+
  11. (F86) X6 M 2015+
  12. (F48) X1 2016+
  13. (F48) X1 (2016+)
BMW Z Series
  1. (E36/7) Z3 1997-2002
  2. (E85) Z4 M Roadster
  3. (E85/E86/E89) Z4 2003+
  4. (E86) Z4 M Coupe
  5. (E52) Z8 2000-2003
BMW 1600-2002 / tii BMW i Series
  1. (I01) BMW i3 2014+
  2. (I12) BMW i8 2014+
MINI Cooper and Cooper S
Racing
Racing Home Racing News Racing Schedule Racing Photo Gallery
Gallery
Photo Gallery Wallpaper Project Cars
  1. Project i8
  2. Project F80 M3
  3. Turner F82 M4
  4. Turner X5 M
  5. Turner F22 2 Series
  6. Turner F13 M6
  7. Turner F10 M5
  8. Turner F30 335i
  9. Turner E9X M3
  10. Turner E92 335i
  11. Turner E82 1 Series
  12. Turner ActiveE (100% Electric)
  13. Turner E46 M3
  14. Turner E46 330i ZHP
  15. Turner E36 M3
  16. Turner E30 M3
  17. Turner MINI Cooper S
  18. McLaren F1
  19. Turner E92 M3 Lime Rock
  20. Turner F80 M3 Silverstone
Video Gallery
Projects
Turner BMW i8 Turner BMW F80 M3 Turner BMW F82 M4 Turner BMW X5 M Turner BMW F22 2 Series Turner BMW F13 M6 Turner BMW F10 M5 Turner BMW F30 335i Turner BMW E9X M3 Turner BMW E92 335i Turner BMW E82 1 Series Turner BMW ActiveE (100% Electric) Turner BMW E46 M3 Turner BMW E46 330i ZHP Turner BMW E36 M3 Turner BMW E30 M3 Turner MINI Cooper S McLaren F1 Turner BMW E92 M3 Lime Rock Turner BMW F80 M3 Silverstone
About Us
About Turner Motorsport Customer Feedback The Turner Team
  1. Open Positions
Returns Policy Shipping Info Contact Us Privacy Policy Security Policy FAQs

BMW E36 Oil Coolers & Oil Cooler Parts

BMW E36 Oil Coolers & Oil Cooler Parts The condition and state of your oil can make or break your day at the track. Oil is working best during a certain temperature range and when exceeded the protective properties of oil will break down. This is especially critical with older, dirty oil. Newer cars with high underhood temperatures are even more at risk. Aside from frequent oil changes and more capacity the best way to keep healthy oil flowing through your engine vitals is with an oil cooler. We offer track-developed oil cooler kits and other accessories aimed at reducing oil temps or making your current setup work safely and more efficiently. An oil cooler will not make your car faster or handle better. It's simply excellent preventative action to avoid costly troubles in the future.
You're currently viewing parts for your (E36) 3-series 1992-1999. Reset your chassis
For accurate results, specify your model below.
E36 323/325/328/M3 Turner Motorsport Oil Cooler Kit - Stage 2 with Euro Oil Cooler The TMS Stage 2 Oil Cooler Kit takes the benefits of the factory oil cooler and housing in Stage 1 and adds the TMS-exclusive HTP oil lines. This makes it possible to use the factory oil cooler with a supercharger or a racing alternator pulley. This is possible because the oil lines are routed away from the front of the alternator and alternator pulley. The TMS Stage 2 Oil Cooler Kit uses mostly factory BMW parts to maintain the same clean appearance and performance you would expect if it was installed by the factory. The HTP lines (High Temperature Polymer Braided) oil lines are better than a rubber or stainless steel line. They are non-abrasive, unlike stainless lines, so they won’t cut into power steering or coolant hoses. Our Kit works on all US-spec 6-cylinder E36 BMWs with the S52 engine. All components included with the TMS Stage 2 Oil Cooler Kit bolt or clip into place with only a slight modification to the alternator cooling tube (only required on particular models). By providing essential hardware with this kit the final result is a hassle-free installation for you, making this an ideal kit for a street/track car. This kit can be fitted to any US spec 6 cylinder E36 BMW, including M3, 325i, 325is, 328i, 328is, and 323is (sedan, coupe and convertible).

This oil cooler system incorporates the Euro M3 oil filter housing which has ports for the delivery and return lines of the oil cooler. The internal pathways of the filter housing are designed for the oil to flow out of the housing, into the cooler, and then return to the housing. The US housing is not setup for any of this, as the oil just runs straight into the filter and onto the engine. Also, the Euro housing has an integrated thermostat to bypass the cooler at lower temps (who needs cold oil when the engine is cold?). We use the system from the Euro E36 M3, so all parts are guaranteed to fit and look as it would, had the car left the factory with it installed. Our products are engineered to work as a complete system, we do not take shortcuts – no leaks, no fitment problems, and as always superior performance.

Parts included: Original BMW oil cooler (from the Euro E36 M3), TMS custom built HTP oil lines with -10 fittings, 2 AN-10 oil line adaptor kits, a BMW Euro E36 oil filter housing (properly modified to accept the US banjo style fitting of the VAN0S oil line), brackets to mount the cooler to the bottom of the stock radiator (TMS exclusive!), and instructions.
Part #: TMS1382
Price: $1249.25 (USD) 
Free Shipping Free Shipping
Quantity:   
E36 Euro Oil Cooler Mounting Brackets Made in the USA When adding the Euro oil cooler to your E36 you may have noticed there was no provision on the US radiator to mount it. The Euro radiator has integrated hangers for mounting the oil cooler but the US radiator does not. We have come up with these trick aluminum hangers that work perfectly with the US radiator and look factory! No fabrication or modification needed - these bolt to the boss of the Euro oil cooler and slip into existing slots on the radiator.

This item fits the following BMWs when used with the Euro oil cooler:
1992-1999 E36 BMW 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
Part #: TEN3631201
Price: $79.50 (USD) 
Quantity:   
E36 Euro Oil Cooler Lines These are the Original BMW oil lines / tubing / hoses to connect the Euro M3 oil cooler to the Euro oil filter housing. These hoses can be used on any E36 6 cylinder (325i, 325is, 323is, 328i, 328is, and M3) to add the European oil cooler. Before ordering these lines, be sure you have all the parts required to do the installation -- including the Euro oil cooler bracket kit, the Euro oil cooler, and the modified oil filter housing. These lines give a factory appearance to the oil cooler retrofit which makes them perfect for otherwise stock cars. If you have a supercharger or track car and need something a little more special, you should get the lines from our Stage 2 Oil Cooler Kit.

This item fits the following BMWs:
1992-1999 E36 BMW 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
Part #: 17212227235
Price: $143.95 (USD) 
Quantity:   
E36 Euro Oil Filter Housing This is a stock Euro E36 M3 oil filter housing, as used on all European spec M3s (with 282hp 3.0 liter or 321hp 3.2 liter). The Euro housing has ports on it for running the Euro oil cooler. It also has an internal oil thermostat that will divert oil back through the block to warm it faster when the engine is cold. This housing is commonly used in the US with the Euro oil cooler when properly modified. The port for the VAN0S needs to be drilled and tapped to match the US VAN0S line and banjo bolt (M14x1.5). We can modify the housing for you (select this option from the list) or you can have it done locally (DIY modification is not recommended). The Euro housing uses the same filter as the other US models.

This is an Original BMW part with these other BMW part numbers - 11427833240 and 11427839858.

This item fits the following BMWs:
1992-1999 E36 BMW 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1991-1995 E34 BMW 525i
1997-1998 E39 BMW 528i
1997-1998 Z3 BMW Z3 2.8
1998-2000 Z3 BMW Z3 M Roadster M Coupe
Part #: 11427839858
Price: $495.95 (USD) 
Free Shipping Free Shipping
E36 M3 Euro Oil Filter Housing - Modified by Turner Motorsport for use on US cars The Euro filter housing has ports for the delivery and return lines of the oil cooler found on the European spec M3. And the internal pathways of the filter housing are designed for the oil to flow out of the housing, into the cooler, and then back to the housing to pass through the filter. Also the Euro housing has an integrated thermostat to bypass the cooler at lower temps (who needs cold oil when the engine is cold?). The US housing is not setup for any of this as the oil just runs straight into the filter and onto the engine. For these reasons, the European E36 M3 coil filter housing is ideal for just about ANY oil cooler application. This is the same housing as used in our Stage I, Stage II, and Stage III oil cooler kits.

What does TMS do to the E36 M3 Euro Oil Filter housing?
The Euro E36 M3 cars use a different VAN0S system and the VAN0S oil line is a different size. The banjo bolt on the US car is M14x1.5 thread and the housing is drilled and tapped using a jig on a machine – not by hand – so the outside surface of the flange is smooth and flat to prevent leaks. This allows this filter housing to be used on US spec M3's, as well as any non-M E36 6 cylinder BMW.

Using this to install an oil cooler? Be sure to consult us. We have complete packaged solutions for street, track and race applications and highly recommend asking our experts.

This item fits the following BMWs:
1992-1999 E36 BMW 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1991-1995 E34 BMW 525i
1997-1998 E39 BMW 528i
1997-1998 Z3 BMW Z3 2.8
1998-2000 Z3 BMW Z3 M Roadster M Coupe
Part #: TEN3631FH1
Price: $495.95 (USD) 
Quantity:   
Oil Filter Housing Gasket - E34, E36, E39, E46, E53, E60, Z3, Z4 This is the replacement for the troublesome oil filter profile gasket on the M50, S50US, M52, S52, M52TU, M54, and S54 engines. The housing is separate from the engine block and in between there is this small profile gasket. The gasket shrinks over time which allows oil to seep out. In our own service shop, it's one of the most common service jobs we perform.

One of the other common leak points is the VAN0S oil line and its seals. Since the line comes out with the oil filter housing anyway you might as well replace the line itself or at least the seals.

On S54 engines (E46 M3, MZ3, Z4 M) there is a flanged head bolt going into the cylinder head, behind the thermostat cover. This holds the left side timing chain guide rail in place and if it's loose or falls out you could have a very serious engine failure to deal with. Make sure to check this bolt while you're replacing the oil filter housing seal. You only need to make sure it's tight. But if it's come loose you may want to replace the seal ring and use a small touch of oil-resistant thread sealer.

This item fits the following BMWs:
1992-1999 E36 BMW 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2006 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
1991-1995 E34 BMW 525i
1997-2003 E39 BMW 525i 528i 530i
2004-2005 E60 BMW 525i 525xi 530i 530xi
2004-2005 E83 BMW X3 2.5i X3 3.0i
2000-2006 E53 BMW X5 3.0i
1997-2002 Z3 BMW Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2005 E85 BMW Z4 2.5i Z4 3.0i
2006-2008 E85 BMW Z4 M Roadster M Coupe
Part #: 11421719855
Price: $4.95 (USD) 
Quantity:   
E36 323/325/328/M3 Turner Motorsport Oil Cooler Kit - Stage 1 with Euro Oil Cooler Our Stage 1 oil cooler kit uses mostly factory BMW parts to achieve a clean appearance and hassle-free installation, and works on ALL US spec 6 cylinder E36 BMW, including M3, 325i, 325is, 328i, 328is, and 323is (sedan, coupe and convertible). Everything we send you bolts or clips into place with no modification necessary and all hardware is included, making this an ideal kit for a street/track car. We use the system from the Euro E36 M3 so all parts are guaranteed to fit and look as it would had the car left the factory with it installed.

Parts included are: Original BMW oil cooler (from Euro E36 M3), BMW oil cooler lines (rubber lines with metal fittings), a BMW oil filter housing (properly modified to accept the US banjo-style fitting of the VAN0S oil line), and brackets to mount the cooler to the bottom of the stock radiator.

This oil cooler system incorporates the Euro M3 oil filter housing. This Euro filter housing has ports for the delivery and return lines of the oil cooler. The internal pathways of the filter housing are designed for the oil to flow out of the housing, into the cooler, and then back to the housing to pass through the filter. Also the Euro housing has an integrated thermostat to bypass the cooler at lower temps (who needs cold oil when the engine is cold?). The US housing is not setup for any of this as the oil just runs straight into the filter and onto the engine. Using this housing also allows the use of the factory euro oil cooler lines, and is a direct fit with a minor modification that we make in-house. Other kits that are on the market don’t have this modification or have a ‘quick fix’ solution which can open up the possibility of leaks or oil starvation. We don’t take shortcuts so our products are engineered to work as a complete system – no leaks, no fitment problems, and superior performance.

This kit will not work on cars with a super charger or racing alternator pulley due to clearance issues with the oil lines. This kit WILL work fine with our TMS pulley kits. For cars with forced induction, turbo, supercharger, or racing alternator pulleys, we recommend our Stage II or Stage III kits, which provide more flexible/universal routing of oil cooler lines, as well as larger oil cooler (Stage III).
Part #: TMS1658
Price: $968.05 (USD) 
Free Shipping Free Shipping
Quantity:   
E36 Turner Motorsport Stage 2 Oil Cooler Line Upgrade Made in the USA The TMS E36 Stage 2 Oil Cooler Line Upgrade Kit is an ideal alternative to the factory oil cooler lines, with multiple added benefits. In combination with our TMS AN-10 Oil Line Adaptor Kit (Part # TEN9910200), installing the TMS E36 Stage 2 Oil Cooler Line Upgrade saves you time and money. Unlike factory lines, the TMS E36 Stage 2 Oil Cooler Line Upgrade can work with vehicles equipped with superchargers or racing alternator pulleys. The TMS oil cooler lines now sit safely away from any moving parts like pulleys and serpentine belts. Our lines are made from HTP (High Temperature Polymer Braided), a synthetic line with multiple advantages over rubber or stainless lines.

We picked HTP lines for four reasons:
1) it insulates the oil from heat better than rubber or stainless lines,
2) the hose can hold a tighter bend radius without crimping or restricting oil flow, which makes routing the oil lines easier and more versatile,
3) the HTP line are less abrasive than stainless steel braided lines so they won’t rub through your factory power steering lines or any other rubber hose on the car,
4) weight savings – even if it is not much remember it all adds up.

Please Note, the following parts are required to install these lines:
• Euro oil filter housing
• Euro oil cooler and mounts
• (2) TMS AN-10 Oil Line Adaptor Kits (Part# TEN9910200)


This item was specifically designed for the following BMWs but may work in other applications:
1992-1999 E36 BMW 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
Part #: TEN3631S2K
Price: $389.85 (USD) 
Free Shipping Free Shipping
E36 Euro Oil Cooler This is the same oil cooler that came on the European model M3. With the proper parts, this oil cooler can be fitted to your US spec M3, 325i, 325is, 328i, 328is, or 323is VERY easily. Please note, this item is the oil cooler itself and does not include brackets, lines, or the modified oil filter housing required to install this part on a US spec E36.

To retrofit this oil cooler on a US spec E36 6 cylinder, you will also need our TMS Euro Oil Cooler Bracket kit, the Euro oil cooler hoses / lines, o-rings, and the modified oil filter housing (which has been modified to accept the fittings of the US VAN0S oil line). For more information on how this oil cooler mounts, please be sure to check out our bracket kit.

Adding this oil cooler will decrease oil temperatures, making this a desirable addition on any race, track or aggresively driven street car.

This item fits the following BMWs:
1992-1999 E36 BMW 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
Part #: 17212224084
Price: $283.95 (USD) 
Free Shipping Free Shipping
Get notified about money saving
specials & deals for your BMW
enter your email address
  • 22 years of BMW Tuning.
  • Award winning service.
  • 10,000's of parts in stock.
  • Quality BMW Parts only.
  • Hassle-free returns.

  • Find us on Facebook




    • 1-800-280-6966
      Mon-Thur 9am-6pm ET, Fri 9am-5pm ET

      • © TurnerMotorsport.com 1993-2017. All Rights Reserved.