click to Chat Live
Contact YouTube Blog Twitter facebook Turner Motorsport on Instagram
1-800-280-6966
 |   Login
  • 0
 |   Login
Shopping Cart (0) Wishlist
Contact

(0) item(s) in your Shopping Cart
Home
Categories
Specials Gifts & Clothing
  1. Genuine BMW Accessories
  2. Genuine BMW Clothing
  3. Turner Shirts Hats and Gear
  4. Gifts under $25
  5. Gifts under $50
  6. Gifts under $100
  7. Gifts over $100
  8. Gift Certificates
  9. Stocking Stuffers
  10. Gift Packages
Brakes
  1. Brake Overhaul Packages
  2. Brake Pads
  3. Brake Pad Sensors
  4. Brake Rotors
  5. StopTech Big Brake Kits
  6. Brembo Big Brake Kits
  7. Stainless Steel Brake Lines
  8. Brake Fluid
  9. Brake Calipers
  10. Caliper Rebuild Kits
  11. Parking Brake Parts
  12. Brake Master Cylinders
  13. ABS/DSC System Parts
  14. Brake Cooling Ducts & Backing Plates
  15. Brake Pads - Brembo GT BBK Calipers
  16. Brake Pads - StopTech BBK Calipers
  17. Hydraulic Hand Brakes
Car Care & Accessories
  1. Car Covers
  2. Wheel & Tire Cleaning
  3. Wax, Polish and Cleaning Supplies
  4. Detailing Gear
  5. Leather & Plastic Care
  6. Car Cleaning Supplies
  7. Chassis Paint, Coatings, Sealants, and Rust Conversion
Drivetrain
  1. Differential and Gearing Upgrades
  2. Differential Mounts and Upgrades
  3. OEM Clutch Kits & Clutch Parts
  4. Performance Clutch Kits & Parts
  5. Lightweight Aluminum Flywheel Upgrades
  6. Stock OEM Dual Mass Flywheels
  7. Stainless Steel Clutch Lines
  8. Clutch Parts
  9. UUC Short Shift Kits
  10. Axle Shafts
  11. Driveshafts
  12. B&M Short Shifters
  13. Performance Short Shift Kits
  14. UUC DSSR - Double Sheer Selector Rod
  15. Drivershaft Center Support Bearings
  16. Flex Discs & Guibos
  17. Transmission Mounts
  18. Transmission Parts
Engine Chips
  1. Performance Chips, 1986-1995 Models
  2. Shark Injector Performance Software, 1996-2005 Models
Engine Parts
  1. Engine Performance Packages
  2. Cam Sprockets & Gears
  3. Water Pumps
  4. Thermostats
  5. Radiators & Cooling System Overhaul Kits
  6. Oil Pan Baffles
  7. Radiator Hoses, Cooling Hoses, & Hose Sets
  8. Engine Fans & Fan Clutches
  9. Underdrive Power Pulleys
  10. Camshafts
  11. Schrick Performance Camshafts
  12. External Engine Parts
  13. Drive Belts & V-Belts
  14. Gaskets, Gasket Sets, Seals, & O-Rings
  15. Crankcase Vent, PCV, and Oil Separator Systems
  16. Motor Mounts
  17. Electrical Sensors, Switches, & Relays
  18. Ignition Parts
  19. Alternator & Alternator Parts
  20. Starter Motors & Starter Parts
  21. Fuel System Parts
  22. Internal Engine Parts
  23. Cylinder Head Parts & Head Bolts
  24. VANOS Units & Parts
  25. Rod Bearing Kits
  26. Oil Coolers & Oil Cooler Parts
Exhaust
  1. Supersprint Performance Exhaust Systems
  2. Performance Headers & Downpipes
  3. Turner Motorsport Performance Exhaust
  4. Borla Performance Exhaust Systems
  5. Corsa Performance Exhaust Systems
  6. Dinan Free Flow Exhaust Systems
  7. OEM Replacement Mufflers and Exhaust Systems
  8. Exhaust System Upgrades
  9. Oxygen Sensor - O2 Sensors
  10. Exhaust Gaskets Hangers and Parts
Exterior / Body
  1. Black Grills
  2. Chrome Grills & Trim
  3. Emblems & Decals for Hood, Trunk, and Wheels
  4. Front Spoilers, Bumper Covers, & Air Dams
  5. Rear Spoilers, Rear Wings, & Aprons
  6. Body Trim Parts & Accessories
  7. Hood & Trunk Shocks, Struts
  8. License Plate Brackets & License Plate Frames
  9. Mirror Kits & Mirror Parts
  10. Window Regulators & Motors
  11. Wiper Blades, Wiper Pumps, & Wiper Motor Parts
  12. Hood Pins and AeroCatch Latches
  13. Racing Tow Hooks and Tow Straps
  14. Aero & Body Kits
Intake
  1. aFe Cold-Air Intake Kits
  2. Turbos & Active Autowerke Superchargers
  3. Dinan Cold Air Intake Kits
  4. Performance Intake Kits
  5. aFe Performance Air Filters
  6. K&N Performance Air Filters
  7. Replacement Cone Air Filters (for Cold Air Intakes)
  8. Intake Cleaning & Recharging Kits
  9. Intake Manifold Upgrades
  10. Intake Manifold Components (DISA, Vacuum, CCV, Etc)
  11. BOV, Chargepipe, and Intercooler Upgrade Kits
  12. Mass Air Sensor & Air Flow Meters
  13. Intake Boots & Hoses
  14. Throttle Body Parts
  15. Other Intake Kits
Interior
  1. Floor Mats
  2. Gauge Kits and Data Acquisition
  3. Auxiliary Input Adaptors for BMW
  4. Pedal Sets
  5. Escort Radar Detectors
  6. Racing Steering Wheels
  7. Shift Knobs, Shift Boots, & Shift Handles
  8. Seats & Seat Accessories
  9. Seat Belts and Racing Harnesses
  10. Cup Holders and Storage
  11. Door Sill Strips
  12. Heating & Air Conditioning
  13. Interior Switches and Switchgear
  14. Sunshades & Windscreens
  15. Interior Trim & Accessories
Lighting
  1. Euro Clear Turn Signals, Parking Lights, & Tail Lights
  2. Turn Signals / Parking Lights
  3. Bulbs for Headlights, Turn Signals and Tail Lights
  4. Headlights, Headlight Lenses, & Headlight Parts
  5. Fog Lights, Fog Light Lenses, & Fog Light Parts
  6. Tail Lights
  7. Stealth Bulbs
Maintenance
  1. Routine Maintenance & Tune-Up Packages
  2. Oil Filters & Oil Filter Kits
  3. Air Filters
  4. Fuel Filters
  5. Cabin Air Filters, Heppa Filters, & Microfilters
  6. Transmission Filter Kits & Transmission Service Parts
  7. Ignition Coils
  8. Ignition Wires / Spark Plug Wires
  9. Spark Plugs
  10. Bentley Repair / Service Manuals
  11. Service Reset Tools & Fault Code Readers
  12. Anti-Freeze and Coolant
  13. Engine Oils - Genuine BMW and OEM
  14. Power Steering and Hydraulic Fluids
  15. Transmission and Gear Oil - Genuine BMW and OEM
  16. MOTUL Engine Oil and Gear Lubricants
  17. Red Line Oil & Fluids
  18. Liqui-Moly Oil and Additives
Suspension
  1. Shocks & Struts
  2. H&R Performance Springs
  3. Dinan Performance Springs
  4. H&R Cup Kit Shock & Spring Packages
  5. Spring & Shock Packages
  6. Turner / H&R Height Adjustable Spring Sets
  7. Bilstein PSS PSS9 PSS10 Coil Over Suspensions
  8. H&R Coil Over Suspensions
  9. KW Coil Over Suspensions
  10. Moton Coil Overs & Race Shocks
  11. ST Suspension Coilover Kits
  12. Turner Motorsport Racing Suspension Kits
  13. TC Kline Racing Coil Overs
  14. Chassis Reinforcement Kits & Parts
  15. Sway Bar Kits
  16. Sway Bar Links & Sway Bar Parts
  17. Camber / Caster Kits
  18. Strut Braces & Stress Bars
  19. Control Arm Replacements & Upgrades
  20. Suspension Bushings & Mounts
  21. Wheel Bearings & Hub Assemblies
  22. Steering Racks & Power Steering Pumps
  23. Tie Rods & Steering Parts
  24. Coil Over Spring Hardware
  25. CATuned Coilover Kits
  26. AST Suspension
Wheels
  1. Apex Flow Formed Alloy Wheels
  2. Forgeline Custom Forged Alloy Wheels
  3. HRE FlowForm Performance Alloy Wheels
  4. D Force Flow Formed Alloy Wheels
  5. Alpina Alloy Wheels
  6. Original BMW Wheels and Wheel Upgrades
  7. Turner Motorsport Wheel Spacers
  8. ECS Tuning Wheel Spacers
  9. H&R Wheel Spacers
  10. Wheel Bolts, Wheel Studs and Nuts
  11. Wheel Emblems, Caps, and Accessories
Tools
  1. Alignment Tools
  2. Battery Chargers and Tenders
  3. Brake Tools
  4. Clutch Alignment Tools
  5. Coil Over Wrenches
  6. Cooling System Tools
  7. Cylinder Head and VANOS Tools
  8. Exhaust Tools
  9. Fan and Fan Clutch Tools
  10. Fault Code Readers and OBD Scan Tools
  11. Fuel System Tools
  12. Genuine BMW Tool Kits
  13. Oil Service Tools
  14. Sockets
  15. Spark Plug Sockets
  16. Transmission and Differential Tools
  17. Wheel Pin Tools
  18. Workshop Chemicals
Clearance
Choose BMW
BMW 1 Series
  1. (E82) 1-series Coupe 2008+
  2. (E88) 1-series Convertible 2008+
BMW 2 Series
  1. (F22) 2-Series Coupe 2014+
  2. (F23) 2-Series Convertible 2014+
  3. (F87) M2 2016+
BMW 3 Series
  1. (E21) 3-Series 1977-1983
  2. (E30) 3-series 1984-1991
  3. (E30) M3 1988-1991
  4. (E36) 3-series 1992-1999
  5. (E36) M3 1995-1999
  6. (E46) 3-Series 1999-2005
  7. (E46) M3 2001-2006
  8. (E90) 3-Series Sedan 2006-2011
  9. (E90) M3 Sedan 2008-2013
  10. (E91) 3-Series Touring 2006-2013
  11. (E92) 3-Series Coupe 2007-2013
  12. (E92) M3 Coupe 2008-2013
  13. (E93) 3-Series Convertible 2007-2013
  14. (E93) M3 Convertible 2008-2013
  15. (F30) 3-Series Sedan 2012+
  16. (F31) 3-Series Touring 2014+
  17. (F80) M3 2015+
  18. (F34) 3-Series Gran Turismo 2014+
BMW 4 Series
  1. (F32) 4-Series Coupe 2014+
  2. (F33) 4-Series Convertible 2015+
  3. (F34) 4-Series Gran Turismo 2014+
  4. (F82) M4 Coupe 2015+
  5. (F83) M4 Convertible 2015+
  6. (F36) 4-Series Gran Coupe 2015+
BMW 5 Series
  1. (E34) M5 1991-1993
  2. (E39) M5 2000-2003
  3. (E60) M5 2006-2010
  4. (E28) 5-Series 1982-1988
  5. (E34) 5-Series 1989-1995
  6. (E39) 5-Series 1996-2003
  7. (E60) 5-Series Sedan 2004-2010
  8. (E61) 5-Series Touring 2006-2010
  9. (F10) 5-Series 2011+
  10. (G30) 5-Series 2017+
BMW 6 Series
  1. (E24) 6-Series 1977-1989
  2. (E63) 6-Series Coupe 2004-2010
  3. (E64) 6-Series Convertible 2004-2010
  4. (F06) 6-Series Gran Coupe 2013+
  5. (F12) 6-Series Coupe 2011+
  6. (F13) 6-Series Convertible 2011+
BMW 7 Series
  1. (E32) 7-Series 1988-1994
  2. (E38) 7-Series 1995-2001
  3. (E65) 7-Series SWB 2002-2007
  4. (E66) 7-Series LWB 2002-2007
  5. (F01) 7-Series SWB 2009+
  6. (F02) 7-Series LWB 2009+
BMW 8 Series BMW Classics (E9, Bavaria, Isetta, etc)
  1. 2500
  2. 2800
  3. 3.0Si
  4. Bavaria
  5. 2800CS
  6. 3.0CS
  7. 2002
  8. 2002tii
  9. (E12) 528i 1977-1981
  10. (E12) 530i 1975-1978
BMW X Series (SAV)
  1. (E84) X1 Series 2013+
  2. (E83) X3 2004-2010
  3. (F25) X3 2011+
  4. (F26) X4 2015+
  5. (E53) X5 2000-2006
  6. (E70) X5 2007-2013
  7. (F15) X5 2014+
  8. (F85) X5 M 2015+
  9. (E71) X6 2008+
  10. (F16) X6 2015+
  11. (F86) X6 M 2015+
  12. (F48) X1 2016+
  13. (F48) X1 (2016+)
BMW Z Series
  1. (E36/7) Z3 1997-2002
  2. (E85) Z4 M Roadster
  3. (E85/E86/E89) Z4 2003+
  4. (E86) Z4 M Coupe
  5. (E52) Z8 2000-2003
BMW 1600-2002 / tii BMW i Series
  1. (I01) BMW i3 2014+
  2. (I12) BMW i8 2014+
MINI Cooper and Cooper S
Racing
Racing Home Racing News Racing Schedule Racing Photo Gallery
Gallery
Photo Gallery Wallpaper Project Cars
  1. Project i8
  2. Project F80 M3
  3. Turner F82 M4
  4. Turner X5 M
  5. Turner F22 2 Series
  6. Turner F13 M6
  7. Turner F10 M5
  8. Turner F30 335i
  9. Turner E9X M3
  10. Turner E92 335i
  11. Turner E82 1 Series
  12. Turner ActiveE (100% Electric)
  13. Turner E46 M3
  14. Turner E46 330i ZHP
  15. Turner E36 M3
  16. Turner E30 M3
  17. Turner MINI Cooper S
  18. McLaren F1
  19. Turner E92 M3 Lime Rock
  20. Turner F80 M3 Silverstone
Video Gallery
Projects
Turner BMW i8 Turner BMW F80 M3 Turner BMW F82 M4 Turner BMW X5 M Turner BMW F22 2 Series Turner BMW F13 M6 Turner BMW F10 M5 Turner BMW F30 335i Turner BMW E9X M3 Turner BMW E92 335i Turner BMW E82 1 Series Turner BMW ActiveE (100% Electric) Turner BMW E46 M3 Turner BMW E46 330i ZHP Turner BMW E36 M3 Turner BMW E30 M3 Turner MINI Cooper S McLaren F1 Turner BMW E92 M3 Lime Rock Turner BMW F80 M3 Silverstone
About Us
About Turner Motorsport Customer Feedback The Turner Team
  1. Open Positions
Returns Policy Shipping Info Contact Us Privacy Policy Security Policy FAQs

BMW E36 Specials, Deals & Discounts

You're currently viewing parts for your (E36) 3-series 1992-1999. Reset your chassis
For accurate results, specify your model below.
Schwaben 17mm Allen Socket - 1/2

Always have the right tools for the job, this 17mm hex head driver is perfect for BMW manual transmission plugs and some axle shafts.

Features:

  •  large ½-inch drive socket 
  • Made of durable chrome vanadium steel

 

 

Schwaben
Part #: HS-1217H55
Price: $9.71 (USD) 
$12.95 (Sale - Save 25%)
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
ECS Tuning Wheel Spacers - 12.5mm - 72.6mm CB

Drastically improve the looks of your vehicle while improving your vehicle's handling characteristics and/or easily adjust your wheel fitment to allow for the proper clearance when installing parts such as new wheels, big brake kits, or lowering suspension components.Interference from components such as shocks, springs, or control arms are a common issue when installing wheel that are not a direct OE size replacement. By moving your wheels a few millimeters each, you can give yourself enough clearance for proper wheel fitment and give your car a wider stance in the process.

ECS Tuning wheel spacers are constructed of high quality 6061-T6 aircraft grade aluminum and are specifically designed by in-house engineers and cnc machined to exact standards, ensuring the best fitment possible. By carefully measuring the OEM wheel hubs and bore dimensions, these spacers mount with minimal clearance to prevent any vibration, retaining the stock-like vibration free operation. 

ECS Tuning is a performance and genuine parts provider that designs their ECS Tuning branded aftermarket automotive parts in-house to ensure the highest quality and affordability possible. Every part's design is subjected to a rigorous test fit and stress test period to guarantee proper fitment and continued reliability for years to come.

 

This item fits the following BMWs:

2008-2012 E82 BMW 128i 135 1M
1988-1991 E30 BMW M3
1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
2007-2012 E93 BMW 328i 335i M3 - Convertible
1976-1981 E12 BMW 528i 530i
1982-1988 E28 BMW 524td 528e 533i 535i 535is M5
1989-1995 E34 BMW 525i 530i 535i 540i M5
2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i M5
1982-1989 E24 BMW 633csi 635csi M6
2004-2010 E63 BMW 645ci 650i M6
1981-1987 E23 BMW 733i 735i
1988-1994 E32 BMW 735i 735il 740i 740il 750il
1995-2001 E38 BMW 740i 740il 750il
1990-1999 E31 BMW 840i 840ci 850i 850ci 850csi
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
2009-2016 Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is

Rear Only
2007-2013 E70 BMW X5M
2007-2014 E71 BMW X6 xDrive35i X6 xDrive50i X6M

ECS
Part #: ECS#254KT
Price: $79.95 (USD) 
Ships on Jan 9, 2018
Quantity:   
Schwaben Torx Screwdriver Kit - 6 Pieces

Torx® screwdriver set includes six common bit sizes, perfect for removing door and dashboard panels, interior trim, and smaller underhood components.

Features:

  • Hardened tips have center hole for use with both standard or tamper-proof Torx fasteners 
  • Large grips add comfort and leverage
  • Handle through-holes make them easy to hang from pegboard hooks
  • Entire kit packaged in a convenient molded case.
  • Sizes include: T10, T15, T20, T25, T27, and T30.
Schwaben
Part #: sd-t6pcs
Price: $22.46 (USD) 
$29.95 (Sale - Save 25%)
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben 30mm 12-Point Deep Socket, 1/2

This large socket is the perfect tool for axle nuts when servicing the axle shafts or wheel bearings.

Features:

  • ½-inch drive 30mm 12-point socket
  • 75mm depth  to accommodate many applications and different length shafts
  • Made of durable chrome vanadium steel

 

  • E36 3 series (1992-1999) -- no M3
  • E46 323/325 (1999-2005) -- no 330/M3
Schwaben
Part #: S-1230S
Price: $14.96 (USD) 
$19.95 (Sale - Save 25%)
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben 32mm / 36mm Fan Clutch and Oil Filter Cap Open-End Wrench

Why buy two tools when you can get one that will do many jobs like this open end wrench? It is great for removing and installing the fan clutch and plastic oil filter cap. Also works great for removing and installing the VAN0S solenoid on M50 engine family. Use the same tools the Turner Motorsport tech's use!

Features:

  • Made of Chrome Vanadium Steel for strength
  • 32/36mm open end sides

 

Schwaben
Part #: DO-3236
Price: $14.96 (USD) 
$19.95 (Sale - Save 25%)
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Trim/Moulding Tool Kit - 5 Pieces

Plastic five-piece tool kit removes trim and door panels, moldings, and adhesive backed logos and badges, without damage. By using a non-marring plastic you can safely and easily remove trip pieces with confidence

 

Features:

  • Pull-type remover

  • Narrow edge remover

  • Wide edge remover

  • Handle remover

  • Upholstery clip remover

Schwaben
Part #: PHR-05s
Price: $11.21 (USD) 
$14.95 (Sale - Save 25%)
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben Axle Impact Socket Kit - 6 Pieces

When it comes to the torque found on axle nuts you're already looking at using a breaker bar or impact gun not to mention the corrosion collected over the years. The safest approach is using impact socket, since they are built with the strength needed to avoid breaking under pressure.

Features:

  • Heavy duty ½ inch-drive sockets and drivers have extra thick alloy steel walls, and take a beating that would destroy normal sockets
  •  Durable black oxide coating wipes clean easily and resists rust
  • Contains three 12-point sockets for a sure grip on the most common sized axle nuts, plus three hex drives for removing common hex-head plugs and fasteners
  • Conveniently packaged in a blow molded case, this set will please the most demanding professional technician or discriminating prosumer

Kit includes:

  • 30mm, 32mm, and 36mm - 12-point axle nut sockets - ½" drive

  • 14mm, 17mm, and 19mm hex head drive axle shoulder bolt sockets - ½" drive

Schwaben
Part #: DS-6P
Price: $37.46 (USD) 
$49.95 (Sale - Save 25%)
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben Round Magnetic Parts Tray, 4 3/8

An easy way to hold fasteners without the risk of knocking them over and trying to find them.

 

Schwaben
Part #: PM-110
Price: $7.46 (USD) 
$9.95 (Sale - Save 25%)
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben Long-Reach 32mm Open End Fan Clutch Wrench This tool was specifically designed for the tight clearances needed to remove most BMW fan clutches. Its slim design lets it fit into tight areas, and the extra-long length is ideal for fan shroud clearance. 
Schwaben
Part #: 007701SCH01A
Price: $17.96 (USD) 
$23.95 (Sale - Save 25%)
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben Exhaust Pipe Hanger removal Pliers

Tired of busting your knuckles from old hardened exhaust hangers?

This Schwaben tool removes the hanger by pressing on the steel hanger bracket and pulling the rubber hanger in one motion. Self centering force pin locks onto the pin while the flat paddle pulls off the rubber hanger from behind. Slim profile and a 25 degree offset works in tight areas.

Schwaben
Part #: 008778SCH01A
Price: $20.21 (USD) 
$26.95 (Sale - Save 25%)
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben 9 Piece Scraper, Hook And Pick Set

Some of the most popular  uses are carbon cleaning/scraping, picking out o-rings, snap rings and clips.This kit features large and small picks, hooks and a 1" wide scraper. This 9pc set should be part of everyone's tool assortment.

Features:

  •  3" Blade MINI Awl, 90°, Hook, and Curve
  • 6" Blade Awl, 90°, Hook, and Curve
  •  6" x 1" wide scraper
Schwaben
Part #: 008504SCH01A
Price: $16.46 (USD) 
$21.95 (Sale - Save 25%)
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Aluminum Coolant Bleeder Screw Replace the flimsy plastic bleeder screw used in the coolant expansion tank or in one of the cooling system hoses with this high quality, durable, aluminum bleeder screw. The stock plastic screw can deform over time due to heat or even regular use. We have even seen the head of the screw snap off, leaving the threaded body stuck in the expansion tank. This aluminum screw will help to prevent sudden failure of the bleeder screw, which can result in immediate overheating of the car.
ECS
Part #: 003530ECS01A
Price: $7.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Trailer Ramps 7

Is your trailer door ramp too steep to get your car into the trailer, 

Load your vehicle safer and easier with Schwaben trailer ramps. Our trailer ramps create a more gradual angle to prevent spoiler damage when loading and unloading vehicle into or out of trailer.

Features:

  • These ramps work on cars weighing up to 6,000 pounds
  •  Ideal for low ground clearance cars with extra wide tires.
  • Will not scratch or mark your floors!
  • Will not scoot, slip or slide no matter the surface
  • Will not damage trailer door or trailer
  • Light weight at only 15 lbs
  • Highly durable, virtually indestructible, and very stable
  • Ramps have built in straps to allow transport or ability to be hung on the wall
  • 74" long, 14" wide, 7" tall

Note: if your current stock trailer ramps have an additional fold down ramp, we suggest you either fold it up or remove it.

Schwaben
Part #: 006168SCH01A
Price: $279.75 (USD) 
$373.00 (Sale - Save 25%)
In Stock
Quantity:   
Schwaben Mini Tubing Cutter

This great little tubing cutter is a must have in tight work spaces. Large adjusting knob for easier adjustment. This tool only needs 1-1/4" of space around tube.

Features:

  • Handles tubing from 3-16mm (1/8"-5/8") O.D.
  • For copper, aluminum, brass and most thin wall steel.
  • Grooved rollers allow flared tube to be cut directly below the flare.
Schwaben
Part #: 006644SCH01A
Price: $5.21 (USD) 
$6.95 (Sale - Save 25%)
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben 6.5 Liter Fluid Extractor

6.5 Liter Extractor system is hand -operated for fast extraction of any type of fluid. Two different diameter extracting tubes are included to suit your particular application. Unit has a vacuum release button for quick and easy release. 

Features:

  • Flip out foot for stability whils using the extractor
  • Built in hose storage
  • 41" Main tube 3/8" OD
  • Two 35" extension tubes 1/4" and 3/16" OD ( couples to main tube).
Schwaben
Part #: 011885SCH01A
Price: $59.96 (USD) 
$79.95 (Sale - Save 25%)
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
E36/E46/Z3/Z4 ECS Tuning Aluminum Water Pump Pulley

Most of the pulleys on your BMW engine are plastic, which become brittle and frail over time and from engine bay heat. A failed pulley could leave you stranded which is why it is vital to inspect the pulleys during routine maintenance. This is an aluminum version of the stock water pump pulley used on the M50/M52/M52TU/M54 engine in the E36, E46, Z3, Z4, and other models. It's uses the same hardware and the original belt as the stock plastic pulley. But the aluminum will last much longer.

Fit the following BMWs: 
1992-1995 E34 BMW - 525i M50 (provides an 8% overdrive)
1992-1999 E36 BMW - 325i 325ic 325is 323i 323is 328i 328is 328ic M3 (provides an 8% overdrive)
1997-09/1998 E39 BMW - 528i (provides an 8% overdrive)
09/1998-2003 E39 BMW - 525i 528i 530i (factory size)
1999-2006 E46 BMW - 323i 323Ci 325i 325Ci 325xi 328Ci 328i 330i 330xi 330Ci (factory size)
2000-2006 E53 X5 BMW - 3.0i (factory size)
2004-2005 E60 BMW - 525i 530i M54 engine (factory size)
2004-2005 E83 X3 BMW - 2.5i 3.0i M54 engine (factory size)
1997-2000 E36/7 Z3 BMW - 2.8i MZ3 (provides an 8% overdrive
1999-2002 E36/7 Z3 BMW - 2.3 2.5 2.5i 3.0i (factory size)
2003-2006 E85/6 Z4 BMW - 2.5i 3.0i M54 engine (factory size)

ECS
Part #: 001977ECS03A
Price: $39.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Universal Silicone 90 Elbow - 60mm - 2 3/8' ID Black Forge Motorsport universal 90 degree elbow with a 60mm diameter.
Forge
Part #: A90-60B
Price: $26.10 (USD) 
$29.00 (Sale - Save 10%)
Direct Ship
Quantity:   
6MM Silicone Vacuum Hose - Blue - 9 Feet Car suffering from vacuum leaks? This vacuum hose has a 6mm inner diameter. 
Forge
Part #: vc06
Price: $19.76 (USD) 
$21.95 (Sale - Save 10%)
Direct Ship
Quantity:   
3MM Silicone Vacuum Hose - Red - 9 Feet Car suffering from vacuum leaks? This vacuum hose has a 3mm inner diameter. 
Forge
Part #: vc03r
Price: $13.46 (USD) 
$14.95 (Sale - Save 10%)
In Stock
Quantity:   
Hub Centric Ring Adapter Set for E39 Wheels These hubcentric rings are required when fitting E39 wheels to any other BMW 5-lug chassis. The E39 uses a larger center bore on the wheel (74.1mm) but most other BMWs have a 72.5mm lip on the hub. That little difference will cause the wheel to not fully seat itself on the hub, even when fully torqued down. These centering rings fill that gap and allow the wheel to rest properly on the hub. For Genuine BMW E39 wheels only.
ECS
Part #: 747260
Price: $10.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben 1/4 A convenient ratchet with 1/4" & 3/8" drive options. The perfect ratchet when you're on the go, reducing the amount of tools you need to carry in case of a road side repair.
Schwaben
Part #: P34472-32
Price: $9.71 (USD) 
$12.95 (Sale - Save 25%)
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben BMW 14/17mm Service Wrench

Take one wrench, not two to your next fluid service. The Schwaben Service Wrench fits both crankcase and drain plugs in BMW, Mercedes, and other European vehicles.

Features:

  • Six-point 17mm box end won’t round off engine oil drain plugs
  • Hardened 14mm hex at the opposite end fits many transmission fill and drain plugs
  • Made of vanadium steel with polished chrome finish
  • Long handle for added leverage.

Fits most vehicles with M10, M20, M30, M42, M44, M50, M52, M54, M56, M70, S14, S38, S50, S52 and S70.

Application note: Please verify the exact size of the transmission and differential plugs in your car. BMW has used both 14 and 17mm plugs in some vehicles. 

Schwaben
Part #: ecst007
Price: $22.46 (USD) 
$29.95 (Sale - Save 25%)
Ships on Jan 2, 2018
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben Black Mechanics Work Gloves - XL

Perfect for any job when it comes to keeping your hands clean and protected.

Features:

  • High dexterity
  • Elastic hook and loop strap
  • Textured latex finger tips for grip
  • Breathable material
Schwaben
Part #: 010337SCH03A
Price: $7.46 (USD) 
$9.95 (Sale - Save 25%)
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben Deluxe Transverse Engine Support Bar

When doing work where the mounts and support need to be removed from the engine or transmission having a engine support bar is wise. By using this engine support the stress is coming off of whatever components are still attached reducing future unnecessary repairs. The safety side of it is having the heavy engine and transmission firmly supported as it should be instead of questionable jack techniques.  

 

Features:

  •  2" longer than most
  • Deluxe transverse support for even more stability
  •  Two angle chain hooks for safer and more stable chain support 
  •  61" long and fully adjustable to any width
  •  Weight rating is a full 1000 lbs.
  •  Includes four rubber padded feet to prevent slipping and damage to cars finish 
  • This tool features a dual hook design for holding engine or transmission in place
  •  Powder coated for long life and durability

Note: It is important that chains are hooked to both sides of hook, like in photo to insure load is supported evenly. 

 

Schwaben
Part #: 009595SCH01A
Price: $217.46 (USD) 
$289.95 (Sale - Save 25%)
In Stock
Quantity:   
Schwaben Battery Post And Terminal Brush

Battery Terminal brush uses the external brush to clean the cable clamps and the internal brush to clean the battery posts. Made from high Impact plastic body to eliminate tool corrosion.

Keeping the connection clean is an important part of making sure your battery is transferring the proper voltage during startup.

Schwaben
Part #: 006348SCH01A
Price: $3.71 (USD) 
$4.95 (Sale - Save 25%)
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben 40

Having a creeper can make working under the car much easier and more comfortable, roll in and out, padding, and keeping those clothes a bit cleaner. 

 

 Features:

  • Thick fully padded leatherette cover.
  • 40" long with heavy-duty metal support frame.
  • 1"" steel tube frame.
  • Four position adjustable headrest.
  •  Six 2 1/2"oil-resistant rollers.
  • Powder coated frame to resist rusting.
  • Overall dimensions: 17" x 40" X 4"
  • Ground clearance: 1-1/2"
  • Ball bearing swivels on wheels.
  • 250lb capacity.
Schwaben
Part #: 005941SCH01A
Price: $44.96 (USD) 
$59.95 (Sale - Save 25%)
In Stock
Quantity:   
Schwaben Locking Service Cart

An important factor when it comes to automotive work other than having the right tool for the job is how to keep those tools organized. The locking Service cart really comes in handy when you need to keep the tools you're using in place, but don't want to leave them out for theft.

 

Features:

  • Thru tray frame construction for stable support
  • 3" deep locking drawer with full extension roller bearing drawer slides
  • Chrome plated 16 gauge box frame and handles
  • 350 lbs load capacity supports heavy tools and equipment
  • Large, easy to maneuver 4" ball bearing swivel casters (2 are locking)
  • Beautiful & durable high gloss black powder coated finish
  • Height  - 35.3"
  • Length  - 30"
  • Depth - 16"
  • Weight  - 64.45lbs
Schwaben
Part #: 006692SCH01A
Price: $134.96 (USD) 
$179.95 (Sale - Save 25%)
In Stock
Quantity:   
Schwaben 3/8

A professional quality flex ratchet features a fine satin finish designed for durability and easy clean up.

Features:

  • Special designed 72T gear mechanism
  • 5 degree of handle movement between gears 
  • Flex head has 7 detent positions in a 180 degree swing
  • Push button release holds socket tight until you are ready to release
  • Ratchet is a full 290mm ( 11") long for extra leverage.

Limited Lifetime Warranty

Schwaben
Part #: 005981SCH01A
Price: $22.46 (USD) 
$29.95 (Sale - Save 25%)
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben Deep Well Impact Socket - 30mm

This large socket is the perfect tool for axle nuts when servicing the axle shafts or wheel bearings.

Features:

  • ½-inch drive 30mm 12-point socket
  • Specially hardened to take the added abuse from a impact gun
  • Coated for added protection and so you can tell it apart from non impact rated sockets
  • 75mm depth  to accommodate many applications and different length shafts
  • Made of durable chrome moly steel
Schwaben
Part #: 003302SCH01A
Price: $14.96 (USD) 
$19.95 (Sale - Save 25%)
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben 46 Piece 1/4

The perfect kit containing most of your needed European essentials. 

Features:

  • 13PCS-1/4" DR.6PT SOCKETS: 4, 4.5 , 5 ,5.5 ,6 , 7, 8 ,9 ,10, 11, 12, 13, 14MM 
  • 1PC- 1/4" DR. QUICK RELEASE RATCHET (72T).
  • 2PC- 1/4" DR.50 & 100MM EXTENSIONS 
  • 1PC- 1/4" DR.150MM FLEXIBLE EXTENSION
  • 1PC- 1/4" DR.UNIVERSAL JOINT
  • 1PC- 1/4" DR.SLIDING T-BAR
  • 1PC- 1/4" DR.6" SPINNER HANDLE
  • 1PC- 1/4" DR.1/4" BIT HOLDER ADAPTER
  • 4PCS-HEX KEY WRENCHES:1.27, 1.5,2,2.5MM
  • 6PCS-1/4" HEX SOCKETS:3,4,5,6,7,8MM
  • 3PCS-1/4' SLOTTED SOCKETS:4,5.5,7MM
  • 3PCS-1/4" PHILIPS SOCKETS:PH1, PH2, PH3
  • 3PCS-1/4"POZI SOCKETS: PZ1, PZ2, PZ3
  • 6PCS-1/4" TORX SOCKETS: T10, T15, T20, T25, T30, T40

Own an E30? This tool kit is a perfect fit for your glovebox!

Schwaben
Part #: 010747SCH01A
Price: $37.46 (USD) 
$49.95 (Sale - Save 25%)
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
E36 325i/328i/M3 Borla Sport Cat-Back Muffler Section: rear muffler (cat-back)
Installation: bolt-on with flanges
Tip Style: dual round 76mm Borla angle cut
Power Gain: +7hp

Our most popular E36 exhaust system for over 15 years! We love the Borla on the E36 because the sound is a nice mixture of throaty growl and subdued volume. It's not too loud but still more than the stock exhaust. The tone is a deep burble that lets you know it's a touch more aggressive than a stock M3 exhaust. It's perfect for a daily-driver performance car that doesn't want to advertise too much. There are other exhausts that never seem quiet but this one that you won't ever tire of.

Every Borla is made with 304 stainless steel for the internals and muffler body. Unlike other systems that can use coated aluminum, mild steel, or 409 stainless, the Borla uses true 304 stainless on the inside as well as the outside. This prevents the muffler from rusting and deteriorating from the inside out. Borla guarantees every muffler with a 1,000,000 mile warranty.


Click here for M3 Dyno Data.

This item fits the following BMWs:
1992-1999 E36 BMW 325i 325is 325ic 328i 328is 328ic M3

Borla
Part #: 14553
Price: $876.65 (USD) 
$985.00 (Sale - Save 11%)
Direct Ship
Free Shipping Free Shipping
Quantity:   
Schwaben Pocket Brake Fluid Tester

It is necessary to check the moisture content of your brake flluid beacuse brake fluid is hygroscopic, meaning it readily absorbs moisture. Over a period of time moisture will cause brake fluid to degrade. Once brake fluid reaches a certain level the brake fluid is no longer able to function properly in the brake hydraulic systems. 

This Schwaben Brake fluid tester has a green, yellow and red light that represent's moisture content of DOT 4 brake fluid to determine if service is needed.

Features:

  • Green LED, H2O level is <1.5% = OK
  • Yellow LED, H2O level is 1.5 to 3% =Replace soon
  • Red Led, H2O level is >3% Replace Immediately
  • Auto-off function
  • Bright Led Flashlight 
  • One AAA battery operation- not included

 

Schwaben
Part #: 015745SCH01A
Price: $19.46 (USD) 
$25.95 (Sale - Save 25%)
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben 6mm Hose Clamp Flexible Driver

Makes those hard to reach hose clamps much easier to loosen up.

Features:

  • 6mm driver
  • 6"  flex shaft
  • Overall length of 10-1/2"
  • No-slip grip resistant to wet or oil coated hands

 

Schwaben
Part #: 010658SCH02A
Price: $8.21 (USD) 
$10.95 (Sale - Save 25%)
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
E36 318i Supersprint Connecting Pipes for Racing Muffler (304 Stainless)

Free ground shipping! 

Supersprint exhaust is widely recognized as the leader in complete exhaust system upgrades - extremely high quality, well designed for optimal flow, and amazing sound. Even at a premium price Supersprint is an unbeatable exhaust system because every aspect is done to such a high level. A Supersprint exhaust rewards you with a terrific sound, long lasting construction and excellent fitment. The Supersprint sound is very 'European' which fits the sporting sophistication of BMWs perfectly. Most systems are also modular - sections can be added or removed to custom tailor the exhaust sound to your preferance. Aside from 'Race' systems, their mufflers meet European noise laws so you get a refined and tuned sound without being excessively loud. Most Supersprint systems are built with larger diameter piping to improve exhaust flow which helps the engine do less work and make more horsepower! Supersprint exhausts generally run at a premium over other systems but no other system on the market can match their quality, performance, or reputation!

NOTE: Supersprint engineers and manufactures complete exhaust systems. This part was designed to be used with the rest of the Supersprint system on this car but may be used on its own. Contact us for more details.

Supersprint
Part #: 043411
Price: $151.25 (USD) 
$201.66 (Sale - Save 25%)
Ships on Jan 11, 2018
Free Shipping Free Shipping
Quantity:   
KBS Auto Gold Standard Fuel Tank Sealer Kit KBS Fuel Tank Sealer Kit contains all of the essential products to completely clean, treat, and seal a 25-gallon automotive fuel tank. The complete kit is formulated to stop fuel tank rust in its tracks and then coat and seal the tank, including filling small pinholes and weld seams. The final coating is impervious to fuels, alcohol additives, and most solvents. It's a tough ceramic-like barrier against future corrosion.

KBS Fuel Tank Sealer Kit includes:
+ KBS Klean - for 'washing' and stripping away other chemicals and foreign particles
+ KBS Blast - dissolves rust and metal oxides and converts it to a zinc phosphate that is ready for coating
+ KBS Gold Standard Tank Sealer - brushable coating that leaves a rock-hard ceramic-like coating that is very resistant to salt and chemicals
+ Chemical-resistant black nitrile gloves
+ Brushes and stirring stick
+ Detailed instructions

Step 1. Klean. The KBS process involves first treating and prepping the rusty area before the final coating is applied. The surfaces must first be cleaned with the KBS Klean to strip away grease and other chemicals that will interfere with coating adhesion. Klean is water based and biodegradable and doesn't have the harsh smells and effects of solvents or chemicals. Let Klean soak but rotate the tank every minutes to ensure complete coverage. The cleaner the tank the better the adhesion so repeat until you're satisfied. The Klean process should be left to completely dry before moving to Step 2.

Step 2. Blast. Rust Blast is the actual conversion of rust into zinc phosphate state and is etched for proper paint adhesion. This step is essential for stopping the rust in its tracks and from spreading. It's also a primer for the final stage of coating, leaving behind a white powdery residue. Like the Klean it's also water based and biodegradable. For the rust conversion to be complete pour the Blast into the tank and rotate several times to ensure coverage. Rinse and allow to dry completely before sealing.

Step 3. Tank Seal. For the finishing touch, pour the KBS Tank Sealer into the tank. The Sample kit includes enough coating for a 25-gallon tank and it's formulated to be applied as a single coat. Rotate the tank to ensure complete coverage and drain the excess. It's important to not allow the Tank Seal to pool or collect so make sure it drains well. Use any excess to coat and seal the outside of the tank, especially in areas that might have leaks. Tank Seal leaves a very tough and hard surface that is impervious to most solvents, fuels, acids, and road salt. When fully cured it's flexible, allowing it to move as the tank expands and contracts. It's self-leveling too which produces an even finish that will not crack, flake, or peel and will withstand temperatures up 600*F (316*C).

Application note: The KBS process will need approximately one week to fully complete (the recommended drying time on the tank is four days). This is perfect for restoration jobs or longer builds where the car can sit for an extended period of time.

Installation Instructions

In order for the 3-step process to work correctly, you must closely follow KBS' instructions. You can view/download them here prior to receiving your order:
For a PDF of the installation instructions, click here.

Demonstration Videos


KBS Tank Seal Process -
KBS Klean and KBS Blast

KBS Tank Seal Process -
KBS Tank Seal

Due to shipping restrictions, this product can ship only via UPS Ground.
Turner Motorsport
Part #: 53000
Price: $65.95 (USD) 
Ships in 5 days
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Driveshaft - E36 M3 - Manual Transmission - 10/1996-1999 Got a vibration through the driveline on your BMW? Did you know that the u-joints are not replaceable on a factory driveshaft?Our remanufactured driveshafts allow for future replacement of u-joints and are rebuilt to a higher specification than the factory driveshaft.We start with OEM u-joints and then machine yokes onto the driveshaft to allow for future u-joint replacement.All bushings, universal joints, center bearings are replaced with new hardware (flex discs are not included but available separately).The whole unit is then dynamically balanced on a precision Axiline Balancer.

Included in the price of the driveshaft is UPS return label, so you can return your core for refund quickly, easily and without additional expense.

This item fits the following BMWs:
10/1996-1999  E36 BMW  M3 Sedan, Coupe, & Convertible with a Swivel Joint and not a CV joint.
Turner Motorsport
Part #: 813X
Price: $761.45 (USD) 
Direct Ship
Free Shipping Free Shipping
Quantity:   
Turner Motorsport
Part #: TSU3690001
Price: $29.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Turner Motorsport Rear Deck Emblem / Badge TMS is proud to offer our own rear deck emblem, constructed out of the highest quality injection molded ABS plastic, then chrome plated and bonded to an OEM automotive grade adhesive backing. It perfectly accentuates the rear of your BMW and blends in flawlessly with the factory badges. Our badge measures 5" (127mm) x 1.1" (28mm) – similar to the dimensions on many of the factory badges.
Turner Motorsport
Part #: TMS1622
Price: $24.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Upper Spring Hats/Perches (Pair) - 2.5 Inch / 16mm Pin / Tapered Seat Made in the USA These aluminum upper spring hats are for coil over struts with a 2.5" coil over spring. The specs are listed below; match the hat specs with your spring and strut. For a proper fitment you must confirm the spring hat matches the strut pin, especially on high-end motorsport struts.

Spring I.D.Strut Pin Diam.Strut Pin Seat
2.5"16mmtapered

Turner Motorsport
Part #: TSU9980550
Price: $59.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Turner Motorsport Key Chain Add some blue and yellow jewelry to the key of your BMW. This sleek key ring pendant is made from high-quality stainless steel with colored Turner logo inlay and will look good paired with any BMW key whether it's a classic 2002 or a brand new M4.
Turner Motorsport
Part #: TMSKEYCHAIN
Price: $9.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Rear Differential Mount - Turner Solid Delrin - E30, E36 318ti, Z3 Made in the USA This rear differential mount is made from near-solid Delrin plastic and is a direct replacement upgrade from the stock rubber piece. The Delrin material has almost no flex to it, which results in better response, more feedback, and more power transferred to the wheels. Because the diff on these cars acts as a 'stressed' part of the rear suspension, we only advise using this solid mount with our Turner Solid Aluminum Subframe Mounts. This part is legal in many racing classes.

This item fits the following BMWs:
1984-1991 E30 BMW 318i 318is 318ic 325e 325es 325i 325ic 325is 325ix M3
Turner Motorsport
Part #: TDR3080007
Price: $46.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Tire Totes Wheel Felts

Benefits:

  • Protects rims from knicks and scratches
  • Additional level of protection from tire and brake residue for your cloths and vehicle interior
  • One size fits all Tire Tote bags
  • Durable .25" thick felt pad
  • Easy to install
  • Large ventilation hole


Kit Includes: - Two Wheel Felts
If you wish to protect both front and back of thewheel buy one kit per wheel, if you only want to protect the front face ofwheel, buy one kit per pair of wheels.
(Tire Totes sold separately)

Dimensions:
 • 
1/4" x 20"
 • 
Fits with Tire Tote product
 
  (22" through 29" tire)

Turner Motorsport
Part #: 00037
Price: $33.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Genuine BMW Coffee Mug & $100 Turner Motorsport Gift Certificate Special Gift Package! This BMW holiday gift package includes a $100 Turner Motorsport gift certificate (the perfect gift for any BMW enthusiast) and a Genuine BMW ceramic coffee mug. That's essentially a free authentic BMW coffee mug to give for that BMW lover on your shopping list.
Packaged by Turner
Part #: BMW-MUG-100TMS
Price: $100.00 (USD) 
$116.95 (Sale - Save 14%)
Ships in 5 days
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
E36 328i/is 96-99 Stage 3+ Turner Motorsport Performance Package 1996-99 E36 328i/ic/is Stage 3+ Performance Package
Peak Power Gain: +34hp / +12ft-lbs
Rev limit: 7000
Octane: 91 or higher

Our Stage 3+ kit is setup around the best upgrades to make power on the M52 engine: cold-air intake kit, M50 manifold, M3-spec cams, and performance software.

We sell this kit a number of different ways. The base Stage 3+ Performance Package includes:
aFe Cold Air Intake (oiled cotton filter, heat shield, intake tube)
M50 manifold adapter kit (M50 manifold not included)
TMS Shark Injector performance software

Optional Items:
New stock E36 M3 camshafts (or Schrick equivalent)
M50 manifold
Modified fuel rail cover (clears the fuel injectors with M50 manifold)

Adding the M50 manifold produces huge power gains in the upper RPM. If you spend the majority of your time over 5000 RPM, you're going to love this kit. The parts in Stage 3+ are our most-popular performance upgrades for the E36 328i: intake, cams, software, complemented by the M50 manifold. Stage 3+ shifts the focus entirely to the top end of the RPM. With the change in the manifold there is not much of a mid-range torque increase. The Conforti software keeps any torque loss to a minimum.

The software is also Conforti-tuned and supplied with the Shark Injector software loader. The Shark Injector is a do-it-yourself reflash tool that plugs into the diagnostic plug in the engine bay. With the push of a button, it will copy your stock software and reflash your computer with the performance tune. You can set it back to stock at any time by following the same procedure.

The aFe intake is made with heat-blocking materials, reducing underhood temperatures and not contributing to heat soak of the air filter. aFe uses an oiled cotton air filter for maximum air flow and excellent filtration. The kit is supplied complete with heat shield, carbon fiber intake tube, sealing materials, hardware, and install instructions.

Related Upgrades: We are often asked what would complement our software and intake packages. Within any Stage, we recommend our Underdrive Power Pulley Kits. The Power Pulley Kit will under-drive the alternator, water pump, and power steering pump. Under-driving means each component is moving slower which requires less power. The saved horsepower is put back to the engine where it transfers to power at the wheels. Power gains are typically 10 horsepower at the wheels.

We also recommend upgrading the cat-back muffler for slightly more performance, lighter weight, and a more-aggressive sound. Our favorite E36 mufflers are the Supersprint, Borla, or Corsa exhausts. The Supersprint is the quietest and most like stock while the Corsa is the most aggressive (Borla being in the middle). You can expect a gain of 5whp with any of these exhausts.

1996-99 E36 328i/ic/is Stage 3+ Performance Package includes:
aFe Cold Air Intake (oiled cotton filter, heat shield, intake tube)
M50 manifold adapter kit (M50 manifold not included)
Shark Injector Stage 3+ performance software

This Package requires additional parts, sourced or sold separately:
Stock E36 M3 camshafts (or Schrick equivalent)
Modified fuel rail cover (clears the fuel injectors with M50 manifold)
M50 manifold
TMS can supply all of these parts for you or you can source your own. Contact us before or after your order about the availability and cost of these parts.

Applications:
1996-1999 E36 328i sedan, 328i cabrio, 328is coupe
Turner Motorsport
Part #: TMS2896
Price: $997.95 (USD) 
Direct Ship
Free Shipping Free Shipping
Quantity:   
Fiberglass Intake Duct and Headlight Cover - E36 Coupe The same headlight covers Turner Motorsport used in Speedvision Touring Car Racing on our E36s. Constructed of lightweight, highly durable fiberglass. Kit includes both drivers and passenger headlight / turn signal covers with the intake opening. The drivers side cover allows for direct intake of fresh, cold air to the engine. Replaces headlight assemblies.

This item fits the following BMWs:
1992-1998 E36 BMW 318i 318is 318ic 323is 323ic 325is 325ic 328is 328ic M3 - Coupe & Convertible Only
Turner Motorsport
Part #: E36HD2DI
Price: $249.95 (USD) 
In Stock
Free Shipping Free Shipping
Quantity:   
Upper Spring Hats/Perches (Pair) - 60mm / 16mm Pin / Square Seat Made in the USA These aluminum upper spring hats are for coil over struts with a 60mm coil over spring. The specs are listed below; match the hat specs with your spring and strut. For a proper fitment you must confirm the spring hat matches the strut pin, especially on high-end motorsport struts.

Spring I.D.Strut Pin Diam.Strut Pin Seat
60mm16mmsquare

Turner Motorsport
Part #: TSU998063B
Price: $59.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben GT80 Plus Professional Scan Tool Tablet Platform

The GT80 PLUS by Schwaben is extremely easy to set up and even easier to use. It features a genuine Windows 8.1 operating system, Intel quad-core processor and a 10.1” LED capacitive touch display – making it your fastest, easiest solution to attaining valuable data.

This scan tool offers an amazing UI experience, giving users the ability to update with one touch, and easily navigate through menus. With the diagnostic tool connected to the vehicle’s OBD port, it automatically retrieves the VIN code. Additionally, you can manually enter the VIN to identify the model you are working on.

GT80 PLUS automatically checks and recognizes all available electronic control units on a vehicle in a matter of seconds. In addition, it instantly displays all the errors detected on the vehicle, and allows errors to be viewed and cleared with just a single click.

What is the GT80 Plus capable of?

● Compatible with current model vehicles

● Compatible with both OBDI and OBDII cars, SUVs, minivans, light-duty trucks sold worldwide

● Get access to powertrain, chassis and body systems

● Quick Test function to test most vehicle systems

● Read and clear diagnostic trouble codes and resets MIL

● View live vehicle sensors data in a text, graph and gauge format

● Merge interactive live sensor graphs for easy and intuitive diagnosis

● Live data self-learning and alarm when live data over range

● Record and playback your data logs for offline analysis

● Read and clear freeze frame data

● Run component/system bi-directional tests

● Support adaptations and control module coding

● Key coding for several vehicles

● Support the most commonly required service features like brake deactivation, service resets, and transmission adaptations

● Multi-language menus and code definitions for an international marketplace

● Code troubleshooters provide you faster and easier diagnosis

GT80 PLUS Features Actuations, Adaptations and Control Module Coding

GT80 PLUS cannot only read your codes, but it can also actuate components, run system tests, program control modules. Reading the trouble codes from your vehicle is easy. But without live data, bi-directional controls and other special functions, you may not have enough information to get the problem fixed right. It allows you to use the scan tool temporarily activate or control a vehicle system or component. With GT80 PLUS, the check of electronic components such as switches, sensors, relays, & actuators is made a simple task, saving your time and labor costs. It gives you the ability to ‘flash’ a control unit with new program data. Provided that a module can be re-coded, GT80 PLUS allows for the coding and programing of a replacement control module or changing previously stored incorrect coding as expensive factory tools do. In addition, it lets you recode the transponder in a mechanical key or key FOB. When a key for a modern vehicle is replaced, the new unit will often turn the mechanical switch but fail to initialize the system or start the vehicle. If this occurs, it is typically because the transponder inside the key has not been coded to that particular system.

With these factory tool like functions, GT80 PLUS is an invaluable tool that allows you to perform complicated repairs faster and easier, boosting your bottom line and customer satisfaction.

GT80 PLUS shows live vehicle sensors data in text, graph and gauge format and allows you to focus on any suspicious or symptom-specific data parameters. It’s powerful graphing capability gives you the ‘real picture’ of what’s going on in the vehicle. You can view up to 4 parameter graphs simultaneously.  Still you can merge multiple PID plots into one coordinate, so you can easily see how they affect each other, providing you with the most comprehensive and functional look at live data possible.

ã¢â‚¬â¢         USA Coverage

Chrysler,Ford,GM,Brazilian GM(For Brazilian Market Only)

ã¢â‚¬â¢         ASIA Pacific coverage

Au Ford (For Australian Market Only), Acura, Brilliance, BYD, Chery, Daewoo, Geely, Great Wall, Honda, Holden (For Australian Market Only), Hyundai, Infiniti, Isuzu, JAC, Kia, Lexus, Mazda, Mitsubishi, Nissan, Perodua, Proton, Scion, Subaru, Suzuki, Toyota

ã¢â‚¬â¢         European Coverage

Audi, Bentley, BMW, Bugatti, EU Ford, Jaguar, Land Rover, Maybach, Mercedes Benz, Mini, Opel, Porsche, Rolls-Royce, Saab, Seat, Skoda, Smart, Sprinter, Vauxhall, Volvo, VW

ã¢â‚¬â¢         French & Italian Coverage

Abarth, Alfa-Romeo, Citroen, Dacia, Fiat, Lancia, Maserati, Peugeot, Renault

Note: GT80plus has 18 months free updates after registration.

Tool must be registered to receive update notices.  

This scan tool works with all OBD I and OBD II BMW vehicles.

 

Schwaben by Foxwell
Part #: gt80plusKT
Price: $1699.95 (USD) 
$1999.95 (Sale - Save 15%)
Ships on Feb 19, 2018
Free Shipping Free Shipping
Quantity:   
Differential and Transmission Oil Drain and Fill Combo Wrench This multi-functional combination wrench features a 14mm Allen hex socket at one end and a 17mm hex wrench at the other. This allows you to perform drain and fill procedures on your BMW with one tool! The 14mm Allen is common for drain and fill plugs on BMW differentials. This wrench is ideal because many BMWs with spare tire wells do not have adequate space to fit a standard 14mm Allen socket and ratchet. The 17mm hex is common for transmission drain and fill plugs. Other BMW transmissions may also use a 14mm female hex / Allen plug.
Turner Motorsport
Part #: 2760
Price: $59.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben 6

The Schwaben Pistol Grip Locking Pliers, a unique pistol style that is ideal in locations that do not allow the use of regular locking pliers.

Features:

  • The hammer-like lock release is easily pressed in tight locations giving maximum usability to the user
  • Durable, rubberized grip covers provide a comfortable, non-slip grip to ensure your hands have a solid hold at all times
  • Quickly and easily adjust the gate of the jaws for a secure clamp with the easy to use barrel adjuster
Schwaben
Part #: 014565SCH01A
Price: $26.21 (USD) 
$34.95 (Sale - Save 25%)
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
OBDI Conversion Part - Water Temp Sensor Wiring Adaptor Made in the USA The TMS Water Temp Sensor Wiring Adaptor is needed when you are upgrading to OBD-I (1992-1995 components) on a 3.2 or 2.8 liter engine. These earlier engines use two separate water temp sensors in the head, one for the ECU and one for the instrument cluster. Most of the 3.2 and some of the 2.8 liter engines do not have two holes drilled in the head for the early water temp sensors. This is due to the fact that the 3.2 and 2.8 engines used a combined water temp sensor. So we designed a easy to use plug and play wiring harness. The benefits are: No cutting and splicing, no trying to fine plugs and pins. We also suggest using TMS "3.2 in a 3.0" Coolant Hose Adapter P/N: TEN9931007 to make your life easier.
Turner Motorsport
Part #: TEN9989M50
Price: $49.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben Low Profile 2 Ton Aluminum Floor Jack With 12

 A complete set offered to ensure that the proper lifting techniques are at use. It's never wise to work under a vehicle supported by only a floor jack, with this complete kit you get a complete matching set to get the job done safe and fast.

  • Special low profile thick frame side plates and reinforced lift arm for added strength and use.
  • Wide track front wheels help provide chassis torsion control and durability.
  • Angular positioned pump pistons provide maximum effective pump stroke even when jack is completely under the vehicle.
  • Ball bearing mounted rear swivel caster wheels for easy maneuverability.
  • Side mounted handles for carrying and easy positioning.
  • Overload and bypass safety valve prevents jack overload and over extension.
  • Two piece quick release padded handle for storage or transport.
  • Dual piston's for 5 pump full extension

Details:

  • Jack Capacity 2 Ton
  • Max Lift Height 20"
  • Low Height 3.25"
  • Chassis Length 26.5"
  • Overall Width 13"
  • Saddle Diameter 4.5"
  • Handle Lenght 50"
  • Shipping Weight 50 lbs

Schwaben 12" wheel Stands:

These stands are made from special EPS foam with an anti-skid coating.

Won't scratch or mark your floors!

Lightweight at only 5 lbs each, makes these stands easy to carry and maneuver.

Works on virtually any surface, including sand!

Will not scoot, slip or slide, no matter the surface.

Specs:

12" tall,15.75" long,12" wide.

Works on wheel diameters from 25 to 30 inches.

Schwaben
Part #: 011362sch01aKT1
Price: $293.21 (USD) 
$390.95 (Sale - Save 25%)
In Stock
Quantity:   
Stealth Bulb Set -Single Filament Front/ Rear for BMW with Offset Pins Stealth Bulb Set -Single Filament Front & Rear for BMW with Offset Pins. These are the are the best concealment bulbs on the market; invisible in clear lenses when off and bright amber when on. No more ugly orange egg yolk look in your clear corners. Check your stock bulb and compare to photo before ordering.
Turner Motorsport
Part #: TMS3658
Price: $29.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
 Turner Front Aluminum Strut Brace - E36 323i/is 325i/is, 328i/is, M3 As Used on Project E36 M3
Improve the handling and steering response of your BMW today with a Turner Motorsport strut brace.

Turner Motorsport developed these in association with our European partners to provide a higher quality and better performing strut brace than our competitors. Made of aircraft grade aluminum these strut braces - also know as a "stressbar" - help to minimize chassis flex during the hardest cornering, which keeps your tires squarely on the road and delivers the traction you need when you need it most. Shock absorption is also increased, which reduces road forces and body roll and lends a firmer road-feel. Strut braces provide benefits for both street driven and track driven BMWs.

This brace fits all E36 6-cyl cars from 1992-1999 and has more clearance than our other bars to work with the ASC traction control on the 1993-1995 325i and M3.

This item fits the following BMWs:
1992-1998 E36 BMW 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
Turner Motorsport
Part #: 067007S
Price: $229.95 (USD) 
In Stock
Free Shipping Free Shipping
Quantity:   
Tool - 32mm / 36mm Fan Clutch and Oil Filter Cap Open-End Wrench Why buy two tools when you can get one that will do many jobs like this open end wrench? It is great for removing and installing the fan clutch and plastic oil filter cap. Also works great for removing and installing the VAN0S solenoid on M50 engine family. Use the same tools the Turner Motorsport techs use!
Turner Motorsport
Part #: TMI9910334
Price: $44.39 (USD) 
$64.95 (Sale - Save 32%)
$64.95
Limited Qty Sale
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Tool - Manual Transmission Drain Plug Tool - 17mm To remove the transmission drain plug on a manual transmission requires a special male, hex-drive socket. This BMW drain plug removal tool will fit any 1/2" drive ratchet.
Turner Motorsport
Part #: 143294
Price: $13.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Motorsport Flag Decal Set - E36 Coupe Motorsport flag decal set for E36 Coupe. Includes front and rear set.
Turner Motorsport
Part #: 51148014500
Price: $159.00 (USD) 
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Tool - 46mm 3/4 Drive 6-point Socket Commonly used for the removal and installation of front wheel bearings on many BMWs. This socket works with the wheel bearing nut with BMW part number 31 21 1 128 336 -- used with the following front wheel bearings:

Front Wheel Bearings that use 31 21 1 129 336 nut:
BMW part#Fitment / Chassis
31 21 1 468 753E30 M3 (1988-1991), E24 6 ser (thru 1989)
E28 5 ser (1982-1988)
31 22 6 757 024
31 22 1 468 926
E36 3 ser, including M3 (1992-1999)
E46 3 ser, except M3 (1999-2005)
E32 7 ser (1988-1994)
E34 5 ser (11/1991-1995)
E31 8 series (3/1992 on)
31 22 2 229 501E46 M3 (2001-2006)
Turner Motorsport
Part #: TMI9910M46
Price: $68.95 (USD) 
Ships in 3 Days
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Front Splitter Support Bracket -- E36 BMW

HARD Motorsport's Front Splitter Support Bracket are made to mount a front splitter to your E36 BMW. Power-coated black for protection, these come with the needed installation hardware to mount to your frame rails. Design allowing for 2 inches of height adjustment will allow you to install a variety of bumpers and lower lips.

This fits the following vehicles:

E36 BMW All

HARD Motorsport
Part #: HARD.SPLTR.BRKT.
Price: $134.10 (USD) 
$149.00 (Sale - Save 10%)
Direct Ship
Free Shipping Free Shipping
Quantity:   
E36, E46 HRE FF15 18x8.5/9.0

E36 incl M3, E46 non-M3 RWD HRE FlowForm 18" Wheel Set
Fr: 18x8.5" ET40
Rr: 18x9.0" ET44

HRE Wheels has emerged as the styling leader and trend starter in the European car wheel market. HRE designs are cutting edge and exciting and are featured on the hottest street machines from SoCal to South Beach. The HRE FlowForm wheel line offers forged wheel strength and HRE's stimulating designs at a more attractive price.

The FF15 is a multispoke wheel (15 spokes) very similar to HRE's C109 forged 3-piece wheel. The FF15 comes in 18"-20" sizes but appear larger thanks to the long straight spokes that run right to the edge of the rim. The correct offsets locate the wheel in just the right position without the need for spacers and maintaining the proper clearances to the body, brakes, and suspension. The standard 18" color is Tarmac (black) with eleven optional finishes available too. Contact us for other sizes.

The FlowForm process is new technology with the attributes of a fully forged wheel but at a lower cost. FlowForm starts as a cast face and the barrel is then spin formed over a mold at intense pressure. This gives the wheel greater strength but lighter in weight and with more precise tolerances than a traditional cast wheel. HRE FF wheels are TUV, VIA, and JWL approved and come with a lifetime structural warranty and two-year finish warranty.

HRE FlowForm Wheel Features -
+ state-of-the-art technology
+ lighter and stronger than a cast wheel
+ stimulating looks
+ multiple color and finish options encourage personalization
+ lifetime structural warranty
+ TUV, VIA, and JWL approved

Colors and Finishes -
Standard Colors

Optional Colors (+$500)

This item fits the following BMWs:
1992-1999 E36 BMW 318i 318is 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2006 E46 BMW 323i 323ci 325i 325ci 328i 328ci 330i 330ci

HRE
Part #: E36FF15188590
Price: $1840.00 (USD) 
$2300 (Sale - Save 20%)
Direct Ship
Free Shipping Free Shipping
E36, E46 HRE FF15 18x9

E36 incl M3, E46 non-M3 RWD HRE FlowForm 18" Wheel Set
Fr: 18x9.0" ET44
Rr: 18x9.0" ET44

HRE Wheels has emerged as the styling leader and trend starter in the European car wheel market. HRE designs are cutting edge and exciting and are featured on the hottest street machines from SoCal to South Beach. The HRE FlowForm wheel line offers forged wheel strength and HRE's stimulating designs at a more attractive price.

The FF15 is a multispoke wheel (15 spokes) very similar to HRE's C109 forged 3-piece wheel. The FF15 comes in 18"-20" sizes but appear larger thanks to the long straight spokes that run right to the edge of the rim. The correct offsets locate the wheel in just the right position without the need for spacers and maintaining the proper clearances to the body, brakes, and suspension. The standard 18" color is Tarmac (black) with eleven optional finishes available too. Contact us for other sizes.

The FlowForm process is new technology with the attributes of a fully forged wheel but at a lower cost. FlowForm starts as a cast face and the barrel is then spin formed over a mold at intense pressure. This gives the wheel greater strength but lighter in weight and with more precise tolerances than a traditional cast wheel. HRE FF wheels are TUV, VIA, and JWL approved and come with a lifetime structural warranty and two-year finish warranty.

HRE FlowForm Wheel Features -
+ state-of-the-art technology
+ lighter and stronger than a cast wheel
+ stimulating looks
+ multiple color and finish options encourage personalization
+ lifetime structural warranty
+ TUV, VIA, and JWL approved

Colors and Finishes -
Standard Colors

Optional Colors (+$500)

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required.

This item fits the following BMWs:
1992-1999 E36 BMW 318i 318is 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2006 E46 BMW 323i 323ci 325i 325ci 328i 328ci 330i 330ci

HRE
Part #: E36FF15189044
Price: $1840.00 (USD) 
$2300 (Sale - Save 20%)
Direct Ship
Free Shipping Free Shipping
E36 M3, MZ3 S52 Shark Injector Stage 1 Performance Software With EWS-Delete

 

  • Disable EWS coding in ECU
  • Unlock torque and horsepower
  • Smoother engine with less hesitation
  • Improved throttle response
  • Rev limit increased to 7000
  • Top speed limiter removed
  • Installs in minutes!


Performance software is a  must-have  upgrade on your BMW and you won't find an easier and better software solution than the Shark Injector. Developed by BMW tuning expert Jim Conforti, this device plugs into the car's diagnostic port and flashes new performance files into your car's engine computer (ECU). This particular file includes Stage 1 engine tuning (fuel, ignition, timing upgrades) with EWS-delete programming. There's no removal of the ECU and shipping, no cables, no laptop required - only a battery charger! Installation takes just a few minutes and your engine will perform like never before!

The M52/S52 performance software was developed on the dyno to create maximum power and torque using premium 91+ octane fuel while maintaining BMW reliability and smoothness. The software makes changes to the ECU's maps and algorithms for fuel injection, ignition timing, VANOS and camshaft movement, and transitional fueling. We modify the maps for part throttle and full throttle so you get better response and more torque at all RPM. We also raise the rev limit to 7,000 and remove the top speed limiter. By fine tuning these maps we've been able to improve the S52 engine beyond what BMW did by making more power and torque and a smoother-running engine.

The programming for EWS delete will allow you to use a spare ECU to run the engine. If your original ECU fails, and you find yourself buying a used ECU, you won't have to tow the car to the dealer to have the ECU synced to the car's EWS system. This is also the perfect software solution if you installed an S52 engine in your E36 323/328 - just plug in the M3 ECU and flash with this Shark Injector. This Stage 1 file will bypass the EWS code and give you all of the benefits of our Stage 1 tune.

The Shark Injector plugs into the diagnostic port under the hood of the E36. With the battery charger supplying power, press the Upgrade button and within minutes the ECU is reflashed with the new performance tune. No other software product on the market comes close to how easy it is to install. You can use the Restore button to re-install the stock BMW software at any time. Detailed instructions are included. Other tuners require you to remove the ECU and ship it to them or use a laptop to read and write a new file. The Shark Injector is ready to install right out of the box! A planned future upgrade will allow you to use the USB port to load different performance files.

1996-1999 E36 M3 Performance Software Peak Gains

 


E36 M3 dyno chartHP Gain:+12 @ 6,000 RPM

Torque Gain:+10 @ 4,000 RPM

New Rev Limit:7,000 RPM


Read what others are saying!

(click to expand)

Manny, E36 M3: "Just "sharked" my E36 M3. All I can say is WOW. The car has never run so well. The idle and the engine overall is so smoooooth! The throttle is very responsive, power is right there. Very Nice! Never putting it back to stock! Just wanted to say job well done, and thanks."

Josh, E36 M3: "Just got done putting on my Supersprint exhaust, Shark injector and my intake, wow what a difference. Thank you guys for the performance, I will be a lifetime customer."
 

Shark Injector Installation Instructions

(click to expand)

Shark Injector installation instructions
A capable battery charger is required for the installation. The charger provides backup power supply to the regular car battery during installation. It must be capable of holding a continuous 10amp charge for the full installation (15-20 minutes).
The minimum octane fuel for this software is 91.

Shark Injector FAQ

(click to expand)

Shark Injector FAQ


This item fits the following BMWs:
1996-1999 E36 BMW M3
1998-2000 Z3 BMWZ3 M Roadster M Coupe

 

Shark Injector
Part #: N3MS41E
Price: $449.00 (USD) 
Ships in 2 Days
Free Shipping Free Shipping
Turner Centered Front Control Arm Bushing - 80A - E36, Z3

Here at Turner we understand the importance of an upgrade that will get the results you need on the track and still be tolerable on the drive around town. When it comes to control arms on the track, making them as stiff as you can (usually using solid mounts) is the best way to increase your driving precision by eliminating the deflection of rubber. The next best thing to create a balance would be to stiffen up the control arm with polyurethane, giving you the option of a more stock like feel with 80a or closer to the solid feel with 95a durometers.

When it comes to the E36 chassis you also get the options of choosing a stock centered design or going with the E30 inspired offset bushing to increase castor, further taking advantage of improvd handling. These poly bushings will give your control arms a direct connection between your suspension and the body of the car eliminating the slop felt under take-off and braking so you feel more in control of your vehicle. 

This item fits the following BMWs that use a centered-style bushing: 

1984-1991 E30 BMW 318i, 318is, 325, 325e, 325es, 325i, 325is 
1992-1999 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic
1996-1999 E36 BMW M3 S52
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i MZ3 M Coupe M Roadster 

Turner Motorsport
Part #: 012633TMS01-01
Price: $59.95 (USD) 
In Stock
Free Shipping Free Shipping
Quantity:   
Turner Centered Front Control Arm Bushing - 95A - E36, Z3

Here at Turner we understand the importance of an upgrade that will get the results you need on the track and still be tolerable on the drive around town. When it comes to control arms on the track, making them as stiff as you can (usually using solid mounts) is the best way to increase your driving precision by eliminating the deflection of rubber. The next best thing to create a balance would be to stiffen up the control arm with polyurethane, giving you the option of a more stock like feel with 80a or closer to the solid feel with 95a durometers.

When it comes to the E36 chassis you also get the options of choosing a stock centered design or going with the E30 inspired offset bushing to increase castor, further taking advantage of improvd handling. These poly bushings will give your control arms a direct connection between your suspension and the body of the car eliminating the slop felt under take-off and braking so you feel more in control of your vehicle. 

This item fits the following BMWs that use a centered-style bushing: 

1984-1991 E30 BMW 318i, 318is, 325, 325e, 325es, 325i, 325is 
1992-1999 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic
1996-1999 E36 BMW M3 S52
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i MZ3 M Coupe M Roadster 

Turner Motorsport
Part #: 012633TMS01-02
Price: $74.95 (USD) 
In Stock
Free Shipping Free Shipping
Quantity:   
Liqui-Moly
Part #: 20230
Price: $8.96 (USD) 
$9.95 (Sale - Save 10%)
Ships on Jan 10, 2018
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Liqui Moly Radiator Cleaner - 300mL

Deposits in the radiator can lead to inefficient cooling or improper temperature readings. Long term exposure to high temperatures can cause internal engine components to warp or become damaged without proper cooling. This Liqui-Moly Radiator Cleaner reliably removes these deposits without adversely affecting the rest of the cooling system, allowing the cooling system to run efficiently, cooling the engine to proper operating temperatures. 

This does not contain any acids or alkali's and is acid neutralizing.

Liqui-Moly is a German chemical company that offers top of the line engine oils, additives, and car care products that are designed to extend the life of your engine and ensure the best lubrication and cleanliness off engine and transmission components possible. With more than 50 years of experience and reviews across the world from magazines and race teams, Liqui-Moly proves time and time again why they are one of the most innovative lead forces of performance automotive chemicals in the world.

Liqui-Moly
Part #: 2051
Price: $6.26 (USD) 
$6.95 (Sale - Save 10%)
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Front Control Arm Bushings (FCAB) - Offset Delrin Race - E30, E36, Z3 (Pair)

These bushings have the hole off-center to give your car a little more track, caster, and camber. This style came as standard equipment on E30 M3s (8/89-later) and 1995 E36 M3 but will work with any E30, E36, Z3.

Rubber control arm bushings are designed to flex and absorb energy. That's fine on a streetcar but on an all-out racing machine you want your alignment to stay constant. We have picked Delrin for this application due to its high rigidity and low coefficient of friction allowing for minimal suspension bushing deflection (geometry change) but decreasing bushing windup or drag (friction). They are not recommended for street-use but highly-recommended for track cars.

To save time, pick up a pair of new bushing carrier brackets and hardware. This will save you the time and hassle of pressing out the old bushings. This will especially save you time if you're buying new control arms at the same time (no time wasted removing the old brackets from the arms). Stainless steel set screws included.

Turner Motorsport
Part #: TSU3080D30
Price: $89.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $199 and up
E36 325i 1992 Turner Motorsport Conforti Performance Chip A Turner Performance Chip for the 1992 E36 325i is an absolute MUST-HAVE performance upgrade. This chip was developed on the dyno to increase horsepower and torque from low RPM all the way up to the new 7000 RPM rev limit. Engine management expert Jim Conforti tuned the fuel and spark mapping to maximize output when used with 91+ octane fuel. More power, a smoother engine, and better response are the results. Bang for the buck, this is hands-down the best upgrade to do. The rev limiter is raised to 7000 RPM and the top speed limiter has been deleted.

Turner Performance Chips provide the ultimate in performance advantage! Adding a performance chip to your BMW is the easiest and most cost effective way of increasing BMW power, torque, and performance with NO DOWNSIDES. Through years of BMW performance tuning, we are able to maximize power and torque gains for 91 octane fuel used in North America. By making changes in the ignition and fuel maps of the DME we are able to optimize performance with no side effects or compromises. Other changes will make your BMW smoother and more responsive than when it left the factory. Our chips have a lifetime warranty and a 30-day satisfaction guarantee. If for any reason you are not fully satisfied with the increase in power and overall drivability you can return the chip to Turner Motorsport for a full refund. Chips are supplied with detailed instructions and are user-installed in about an hour. See below for specific information that we may need from your BMW model.

Horsepower Gain:+20 @ 6,000 RPM
Torque Gain:+13 @ 4,500 RPM
New Rev Limit7,000

Required Vehicle Info
E36 325i/is 92Bosch ECU part number, beginning with "0 261"

This performance chip fits the following BMWs:
1992 E36 BMW 325i 325is
Turner Conforti Performance Chips
Part #: TMS4194
Price: $249.95 (USD) 
Ships in 2 Days
Free Shipping Free Shipping
EWS-Delete Chip For Bosch 413 ECU With Silver Label
FOR AN EWS DME IN A CAR THAT DOES NOT HAVE EWS-II
See below for a list of common cars and chassis that this chip would be used in.

A lot of times when building a racecar or doing an engine conversion the EWS-II system can get in the way, adding another layer of complexity to the job. Since racecars and engine conversions have been such a big part of our history, we developed a special chip to eliminate the EWS-II system from the Bosch silver 413 DME. This chip is perfect for someone who bought an EWS-II computer without realizing what the system requires. The chip will de-activate the EWS-II code inside the DME thereby allowing you to use it in a car that did not have EWS-II or on a racecar that has the EWS-II removed completely (EWS module and key). It also has all of the benefits of the "regular" Conforti Performance Chips - more horsepower and torque, increased rev limit (7000 rpm), top speed limiter removed, etc. In the past you would have had to buy a non-EWS DME. This chip saves you both time and money. Click here to learn more about EWS-II.

Turner Performance Chips provide the ultimate in performance advantage! Adding a performance chip to your BMW is the easiest and most cost effective way of increasing BMW power, torque, and performance with NO DOWNSIDES. Through years of BMW performance tuning, we are able to maximize power and torque gains for 91 octane fuel used in North America. By making changes in the ignition and fuel maps of the DME we are able to optimize performance with no side effects or compromises. Other changes will make your BMW smoother and more responsive than when it left the factory. Our chips have a lifetime warranty and a 30-day satisfaction guarantee. If for any reason you are not fully satisfied with the increase in power and overall drivability you can return the chip to Turner Motorsport for a full refund. Chips are supplied with detailed instructions and are installed in about an hour. See below for specific information that we may need from your BMW.

Important Note: This EWS-delete chip is not intended to bypass EWS-II or as a workaround for a problematic EWS-II system. With this chip, no EWS-II components can be in the car. In other words, you cannot use this chip to bypass the EWS-II on a 1995 M3 because the EWS is having problems. This chip is only for using that DME in a car that never had EWS-II to begin with.

Required Vehicle Info
AllConfirm the ECU is a Bosch 0 261 203 413 with a silver label

Common EWS-Delete Applications:
1986-1992 E30 BMW 3-series with M50, S50, or S52 engine conversion
1992-12/1994 E36 BMW 3-series with M50, S50, or S52 engine
1989-12/1994 E34 BMW 5-series with M50, S50, or S52 engine
Turner Conforti Performance Chips
Part #: TMS4228
Price: $299.95 (USD) 
Ships in 2 Days
Free Shipping Free Shipping
E36 Euro Clear Lens Package - E36 323is 325is 328is M3 Coupe / Convert  As Used on Project E36 M3
COMPLETE PACKAGE (SPECIAL PRICE). Kit includes front turn signals, rear tail lights and optional side markers. These European clear turn signal lights make a huge improvement in the aesthetics of the BMW E36. They are very easy to install with simple hand tools. We have packaged the whole car as a set with discount that saves you money. This is our lowest price ever! These lenses fit correctly, won’t dim or turn yellow, tight fit for no leaks, and the correct wiring for the US market (no OBC faults). Amber bulbs are included for the front lenses or choose the Stealth option for a cleaner look. Includes part numbers 82199403093 / 82199403094 / 82199403097 / 82199403098 Please specify your BMW model from the drop-down menu below.

This item fits the following BMWs:
1992-1998 E36 BMW 323is 323ic 325is 325ic 328is 328ic M3 Coupe & Convertible
Turner Motorsport
Part #: TMS338535
Price: $403.60 (USD) 
Direct Ship
Free Shipping Free Shipping
Turner BMW 5mm Wheel Spacers (Pair) - Most BMWs (see applications)

5MM (.20 inch) Wheel Spacer for BMW E24, E28, E30 M3, E31, E32, E34, E36, E38, E46, E60, E63, E82, E83, E87, E90, E91, E92, E93 (E9X), Z3, Z4

Wheel spacers are the ideal solution to resolve a number of fitment and aesthetic problems --

  • Correct wheel offset issues
  • Achieve a flush fitment instead of the "tucked under" look
  • Clearance the wheel from contact with other components (suspension, brakes, etc).
  • Improve handling and stability by increasing track width

A spacer fits between the wheel and the hub assembly and pushes the wheel out by the thickness of the spacer. Our wheel spacers are compatible with almost any type of BMW wheel and are a direct fit to the wheel hub (see below for any fitment notes). Longer wheel bolts or wheel studs are required.

These latest generation of the Turner Motorsport Wheel Spacers represent a total redesign of the wheel spacer concept - a ground-up, clean sheet design based on our years of BMW service and motorsports. We took everything we have learned from our service technicians, customers, and race team crew and built the spacer to beat all spacers. We've been in the BMW wheel spacer business probably longer than anybody and when it came time to make our own spacers, a basic spacer design just wouldn't do. We had to make a spacer that is light weight (for lower unsprung mass), has a tough and durable coating to last through our New England winters, is easily removed (your mechanic will thank you), and is precisely engineered and manufactured for a proper fit on the hub and in the wheel. You won't find a better engineered wheel spacer on the market!

Turner Wheel Spacer Features --
+ hub-centric design, 1-piece spacer
+ precise tolerance fitment thanks to CAD process and CNC mill machine
+ aerospace grade aluminum  light weight but very strong with a high resistance to corrosion
+ additional military-spec hardcoat for further corrosion resistance
+ innovative Quick Release pockets for easy removal (better than a chamfered back edge)
+ laser engraved size and part number for easy identification
+ stealthy anthracite or black color
+ extended bolt sets in factory-matching black or bright silver finish available (wheel stud kits also available)
+ Turner Motorsport track and street tested!
+ Made in the USA

Extended Wheel Bolts
Longer wheel bolts or wheel studs are required for all BMW wheel spacers. Spacers cannot be used with stock bolts. Our extended lug bolts are a very high quality and high grade steel lug bolt (grade 10.9). We offer two finishes to get you just the right look with your wheels - black zinc to maintain a factory BMW appearance or a bright zinc nickel finish to go with polished wheels. Zinc finishes are designed to withstand 700 hours of salt spray testing.

Spacer Specs:
(click to expand)
Spacer Specs:
bolt pattern:5 x 120
center bore:72.6mm
hubcentric?yes
wheel pad size:normal

Fitment Notes:
(click to expand)
5mm spacer note: a 5mm spacer sits on the existing hub lip but leaves less than 5mm of lip for the wheel to rest on. Therefore, wheels that have a bevel around the center bore will not engage the hub lip and may reseult in a vibration.

Year & Model Applications
(click to expand)
2008-2012 E82 BMW 128i 135 1M
1988-1991 E30 BMW M3
1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
2007-2012 E93 BMW 328i 335i M3 - Convertible
1976-1981 E12 BMW 528i 530i
1982-1988 E28 BMW 524td 528e 533i 535i 535is M5
1989-1995 E34 BMW 525i 530i 535i 540i M5
2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i M5
1982-1989 E24 BMW 633csi 635csi M6
2004-2010 E63 BMW 645ci 650i M6
1981-1987 E23 BMW 733i 735i
1988-1994 E32 BMW 735i 735il 740i 740il 750il
1995-2001 E38 BMW 740i 740il 750il
1990-1999 E31 BMW 840i 840ci 850i 850ci 850csi
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
2009-2016 Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
Turner Motorsport
Part #: TWH9905005
Price: $79.95 (USD) 
Back Ordered
Free Shipping Free Shipping
on orders $199 and up
Turner Motorsport Z4 Racecar T-Shirt - Black Welcome to 2014! Introducing our new Z4 GTD race car. The brand new Turner Motorsport BMW Z4 GTD competing in the TUDOR United SportsCar Championship comes to life on high quality 100% cotton black t-shirt. The shirt features some impressive illustrations of both the front and rear of the extremely wide and curvy Z4. The graphics pop off the shirt transitioning from a subtle gray scale to the Turner blue and yellow.

Get yours today, these are limited in quantity and won't last long. Choose size below.
Turner Motorsport
Part #: G200-BK
Price: $24.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $199 and up
Turner Motorsport Brake Bleeder Bottle The Turner Motorsport Brake Bleeder Bottle is the perfect companion when bleeding your brakes! The bottle features a nice long flexible hose so fitment over the bleeder nipple is a snap. These bottles also offer either a magnetic mount or a cable lanyard, so you can hang the bottle or stick it to the brake rotor, this leaves your hands-free to work with your tools. It works great with our Power Brake Bleeder
Turner Motorsport
Part #: TMS1196
Price: $12.25 (USD) 
$16.49 (Sale - Save 26%)
In Stock
Free Shipping Free Shipping
on orders $199 and up
Turner BMW 3mm Wheel Spacers (Pair) - Most BMWs (see applications)

3MM (.12 inch) Wheel Spacer for BMW E24, E28, E30 M3, E31, E32, E34, E36, E38, E46, E60, E63, E82, E83, E87, E90, E91, E92, E93 (E9X), Z3, Z4

Wheel spacers are the ideal solution to resolve a number of fitment and aesthetic problems --

  • Correct wheel offset issues
  • Achieve a flush fitment instead of the "tucked under" look
  • Clearance the wheel from contact with other components (suspension, brakes, etc).
  • Improve handling and stability by increasing track width

A spacer fits between the wheel and the hub assembly and pushes the wheel out by the thickness of the spacer. Our wheel spacers are compatible with almost any type of BMW wheel and are a direct fit to the wheel hub (see below for any fitment notes). Longer wheel bolts or wheel studs are required.

These latest generation of the Turner Motorsport Wheel Spacers represent a total redesign of the wheel spacer concept - a ground-up, clean sheet design based on our years of BMW service and motorsports. We took everything we have learned from our service technicians, customers, and race team crew and built the spacer to beat all spacers. We've been in the BMW wheel spacer business probably longer than anybody and when it came time to make our own spacers, a basic spacer design just wouldn't do. We had to make a spacer that is light weight (for lower unsprung mass), has a tough and durable coating to last through our New England winters, is easily removed (your mechanic will thank you), and is precisely engineered and manufactured for a proper fit on the hub and in the wheel. You won't find a better engineered wheel spacer on the market!

Turner Wheel Spacer Features --
+ hub-centric design, 1-piece spacer
+ precise tolerance fitment thanks to CAD process and CNC mill machine
+ aerospace grade aluminum  light weight but very strong with a high resistance to corrosion
+ additional military-spec hardcoat for further corrosion resistance
+ innovative Quick Release pockets for easy removal (better than a chamfered back edge)
+ laser engraved size and part number for easy identification
+ stealthy anthracite or black color
+ extended bolt sets in factory-matching black or bright silver finish available (wheel stud kits also available)
+ Turner Motorsport track and street tested!
+ Made in the USA

Extended Wheel Bolts
Longer wheel bolts or wheel studs are required for all BMW wheel spacers. Spacers cannot be used with stock bolts. Our extended lug bolts are a very high quality and high grade steel lug bolt (grade 10.9). We offer two finishes to get you just the right look with your wheels - black zinc to maintain a factory BMW appearance or a bright zinc nickel finish to go with polished wheels. Zinc finishes are designed to withstand 700 hours of salt spray testing.

Spacer Specs:
(click to expand)
Spacer Specs:
bolt pattern:5 x 120
center bore:72.6mm
hubcentric?yes
wheel pad size:normal

Fitment Notes:
(click to expand)
5mm spacer note: a 3mm spacer sits on the existing hub lip but leaves less than 9mm of lip for the wheel to rest on. Therefore, wheels that have a bevel around the center bore will not engage the hub lip and may reseult in a vibration.

Year & Model Applications
(click to expand)
2008-2012 E82 BMW 128i 135 1M
1988-1991 E30 BMW M3
1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
2007-2012 E93 BMW 328i 335i M3 - Convertible
1976-1981 E12 BMW 528i 530i
1982-1988 E28 BMW 524td 528e 533i 535i 535is M5
1989-1995 E34 BMW 525i 530i 535i 540i M5
2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i M5
1982-1989 E24 BMW 633csi 635csi M6
2004-2010 E63 BMW 645ci 650i M6
1981-1987 E23 BMW 733i 735i
1988-1994 E32 BMW 735i 735il 740i 740il 750il
1995-2001 E38 BMW 740i 740il 750il
1990-1999 E31 BMW 840i 840ci 850i 850ci 850csi
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
2009-2016 Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
Turner Motorsport
Part #: TWH9905004
Price: $79.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $199 and up
Turner Motorsport Custom Length Adjustable Front Sway Bar End Links (Pair)

Our renowned TMS adjustable front sway bar / swaybar links for BMWs are now available in custom lengths, making them easy to order for any aftermarket or custom suspension setups. Simply measure for your ideal link length, and order the links with the best length range (below). Each sway bar link has a 10mm diameter mounting pin/stud, which is the typical factory/stock size for a universal fitment. These are sold by the pair, and each set includes two matching sway bar end links.

These end links offer the quiet operation and long life of "stock" BMW end links, but with the strength and adjustability of rod-end style sway bar links. These sway bar links can be used on a wide variety of BMWs and aftermarket BMW suspensions. When measuring, please consider that the length ranges of our Custom Adjustable end links are measured from the center to center on the end link mounting stud / pin, as shown in our diagram.

Note for E9X M3: the unique mounting on the M3 strut requires a set of our adapter seats (#TSU9912AF9). You can add them with your links from the menu below.
 

TMS Part#Center to Center (mm)Center to Center (inch)

TSU9912A35155.00mm - 170.00mm6.10" - 6.69"

TSU9912A40170.00mm - 185.00mm6.69" - 7.28"

TSU9912A45180.00mm - 195.00mm7.08" - 7.67"

TSU9912A50190.00mm - 205.00mm7.48" - 8.07"

TSU9912A55207.00mm - 222.00mm8.15" - 8.74"

TSU9912AF1220.00mm - 235.00mm8.66" - 9.25"

TSU9912A70240.00mm - 255.00mm9.45" - 10.04"

TSU4612AF3250.00mm - 265.00mm9.84" - 10.43"

TSU9912A80261.00mm - 276.00mm10.28" - 10.87"

TSU5012AF8280.00mm - 295.00mm11.02" - 11.61"

TSU9912A95290.00mm - 305.00mm11.42" - 12.00"

TSU9912110320.00mm - 335.00mm12.59" - 13.19"

TSU9912115330.00mm - 345.00mm12.99" - 13.58"

TSU9912130362.00mm - 377.00mm14.25" - 14.84"

TSU9912135370.00mm - 385.00mm14.57" - 15.16"

TSU9912140381.00mm - 396.00mm15.00" - 15.60"

TSU9912145389.00mm - 404.00mm15.31" - 15.91"


Please select your length below. 

Turner Motorsport
Part #: TMS2104
Price: $159.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $199 and up
Carbon Fiber Roundel Emblem Decal Set - Hood/Trunk/Wheels/Steering Wheel Help your BMW stand out from the crowd with our colored Roundel emblem covers. Whether you are looking to match your paint color, hightlight your interest in motorsports, or freshen the look of your car, Roundel decals offer a great way to personalize your BMW. These easy to install vinyl decals adhere over the existing Roundel emblems. The kit includes colored quadrants to cover the hood emblem, trunk emblem, steering wheel and 4 wheel emblems - and fender emblems for Z3 and Z4. These are made to withstand all weather conditions and are removed with ease if required.

Currently we offer the following carbon fibre style roundel stickers: Printed Carbon Fiber - Black, Dynamic Carbon Fiber - Silver. Sorry, Dynamic Carbon Red, Dynamic Carbon Black, and Dynamic Black/Silver are no longer available.

Note: These are vinyl overlays for the existing roundels. Actual roundel emblems are not included. We have BMW Roundel emblems available here.

This item fits the following BMWs:
These emblem covers fit all BMW years and models including:
E30, E36, E46, E90, E92, E34, E39, E60, F10, E63, E38, E65, F01, X3, X5, X6, Z3, Z4 and more.
Turner Motorsport
Part #: TMS20551
Price: $29.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $199 and up
E36/E46 ECS Performance Lightweight Flywheel

Lightweight flywheels have proven themselves to be a worthwhile performance enhancement. But with the quicker throttle response and horsepower improvement comes one serious drawback: flywheel chatter. Without the dual-mass flywheel's rubber isolators, a lightweight aluminum flywheel has more rattle than stock. ECS has designed this flywheel using chrom-moly steel and it weighs almost ten pounds less than the stock DMF but not as extreme as full aluminum flywheels. The steel helps dampen vibration and noise so you get near-factory refinement and most of the benefits of a lightweight flywheel: quicker throttle response, better reliability, and more power to the wheels. Zero-balanced and SFI 1.1 certified (material and design has been independently burst tested to ensure quality and safety). This flywheel requires the E34 M5 sprung hub clutch kit. Choose below from the flywheel only or a complete kit.

Modern flywheels are built with additional components that are designed to dampen and minimize vibrations from the engine and transmission. Weight has increased and reliability has decreased. With additional weight more energy is required for it to move. A lightweight flywheel does away with the dual mass design and its additional mass so more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance. And with a single-mass flywheel the unreliable DMF design is eliminated.

Stock flywheel weight - 25.0lbs
ECS flywheel weight = 16.55lbs

This item fits the following BMWs:
1992-1999 E36 BMW 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2002 E46 BMW 323i 323ci 325i 325ci 328i 328ci 330i 330ci (5-speed)
1997-2002 Z3 BMW Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2005 E85 BMW Z4 2.5i Z4 3.0i (5-speed) 

ECS
Part #: 000282ECS01DK
Price: $459.95 (USD) 
In Stock
Free Shipping Free Shipping
Stainless Brake Rotor Set Screw (34211161806) - Set Of 4

This is a set of stainless steel brake rotor retaining screws to replace the factory steel screws. As everyone knows, the stock screws will seize in the holes over time. And the shallow recess on the head means the screw is easily stripped. These replacement rotor screws are stainless steel and won't corrode and seize in place.

This is a set of 4 stainless screws. Most BMW rotors take one screw but some M cars after 2001 will take two screws per rotor.

ECS
Part #: 34211161806KT
Price: $9.96 (USD) 
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
ECS Tuning Wheel Spacers - 30mm - 72.6mm CB

Drastically improve the looks of your vehicle while improving your vehicle's handling characteristics and/or easily adjust your wheel fitment to allow for the proper clearance when installing parts such as new wheels, big brake kits, or lowering suspension components.Interference from components such as shocks, springs, or control arms are a common issue when installing wheel that are not a direct OE size replacement. By moving your wheels a few millimeters each, you can give yourself enough clearance for proper wheel fitment and give your car a wider stance in the process.

ECS Tuning wheel spacers are constructed of high quality 6061-T6 aircraft grade aluminum and are specifically designed by in-house engineers and cnc machined to exact standards, ensuring the best fitment possible. By carefully measuring the OEM wheel hubs and bore dimensions, these spacers mount with minimal clearance to prevent any vibration, retaining the stock-like vibration free operation. 

ECS Tuning is a performance and genuine parts provider that designs their ECS Tuning branded aftermarket automotive parts in-house to ensure the highest quality and affordability possible. Every part's design is subjected to a rigorous test fit and stress test period to guarantee proper fitment and continued reliability for years to come.

This item fits the following BMWs:

2008-2012 E82 BMW 128i 135 1M
1988-1991 E30 BMW M3
1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
2007-2012 E93 BMW 328i 335i M3 - Convertible
1976-1981 E12 BMW 528i 530i
1982-1988 E28 BMW 524td 528e 533i 535i 535is M5
1989-1995 E34 BMW 525i 530i 535i 540i M5
2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i M5
1982-1989 E24 BMW 633csi 635csi M6
2004-2010 E63 BMW 645ci 650i M6
1981-1987 E23 BMW 733i 735i
1988-1994 E32 BMW 735i 735il 740i 740il 750il
1995-2001 E38 BMW 740i 740il 750il
1990-1999 E31 BMW 840i 840ci 850i 850ci 850csi
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
2009-2016 Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is

Rear Only
2007-2013 E70 BMW X5M
2007-2014 E71 BMW X6 xDrive35i X6 xDrive50i X6M

ECS
Part #: 001058ECS04-30KT
Price: $109.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Performance Brake Caliper Guide Bushing Installation Tool Set

Installs bushings straight and true with minimal effort. Includes tools for both iron and aluminum calipers. Purchase only one tool set for your entire caliper guide bushing upgrade - tools are not one time use.

 

ECS
Part #: 003326ECS03
Price: $19.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
M50/M52/S50US/S52 Exhaust Port Block Off Plate

Have an M50/S50 or M52/S52 engine that you need to put in storage? This handy block-off plate fits over the exhaust ports to keep dust, debris, and even creatures from sneaking in through the exhaust. Don't bother with cardboard or shop rags - they won't seal well and will deteriorate after time. These plastic plates are the best semi-permanent solution to sealing your engine for long term storage. Pre-drilled holes fit over the stock exhaust studs and use standard manifold nuts or a regular hex nut.

Not for Euro S50 engine.

Turner Motorsport
Part #: 21442TMSKT
Price: $49.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben 16oz Ball Peen Hammer The 16oz Ball Peen hammers are constructed with a fiberglass handles with a molded rubber grip. The heads are made from drop forged steel to avoid damage and to stand up to long years of impacts. Each side is precision ground for accurate striking points.
Schwaben
Part #: 016805SCH03A
Price: $8.21 (USD) 
$10.95 (Sale - Save 25%)
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben 36oz Dead Blow Hammer The 36 oz dead blow hammer is built with steel shot internals that delivers a stronger force of impact and prevents rebound. The hammer itself is all built from a high-impact poly jacket that encases the head and handle. This hammer allows you to hammer softer metals, such as aluminum, without damaging the surface or the part itself. The handle has a diamond-shaped grip pattern to prevent your hands from slipping and sliding, even with your hands are covered with oil.
Schwaben
Part #: 016805SCH04A
Price: $11.21 (USD) 
$14.95 (Sale - Save 25%)
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben Cooling System Pressure Tester Kit

Are you refreshing your coolant system or having issues with coolant loss? An easy way to test your system for leaks and ensure you're able to maintain pressure without coolant loss is the Schwaben Cooling System Pressure Tester Kit. This kit has everything you need to attach and test your system: a hand operated pressure pump with an attached pressure gauge to carefully and accurately monitor the system's pressure, an attached 24" flex hose that connects with quick-couplers and adapters that tightly seal to prevent air pressure from escaping, 8 color-coded screw on radiator adapters and 4 twist on radiator caps, a temperature gauge, all needed instructions, and a sturdy blow-molded case to protect all components from damage.

This kit includes the following:

  • Hand operated pressure pump with a 0-35 psi gauge.
  • Long 24" flex hose between pump and quick coupler for adapters.
  • 12 high quality adapters for radiator
  • Temperature gauge
  • Instruction Manual
  • Blow molded case
Schwaben
Part #: 014710SCH01A
Price: $97.46 (USD) 
$129.95 (Sale - Save 25%)
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben Set Of 4 Pinch Weld Protectors

These weld protectors allow you to safely jack up your vehicle without crushing or bending any pinch welds. These will fit any jack and will work with many jack stands such as the Schwaben Aluminum Jack Stands.

Specifications:

  • 3" wide
  • 1" tall
  • Single groove top
  • Double grooved bottom
Schwaben
Part #: 3107838KT
Price: $29.96 (USD) 
$39.95 (Sale - Save 25%)
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben
Part #: 007237sch01aktKT
Price: $44.96 (USD) 
$59.95 (Sale - Save 25%)
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben 6

Ensure you are getting the most accurate measurements you can with the Schwaben 6" Carbon Fiber Composite Digital Caliper. Machined components and things like shims and bearings all require very exact sizes for proper clearance and fitment. With this caliper, you can check these component's measurements quickly and accurately, down to .0005in/.01mm graduations. 

Specifications:

  • Carbon Fiber Composite Digital Caliper made from a milled carbon fiber / plastic mix
  •  Digital display with inch, metric and fractional read out 
  •  Push button conversion 
  •  4 measurements - inside, outside, depth and step 
  •  Large LCD Panel 
  •  6"/150mm range 
  •  .0005"/.01mm/1/64" resolution 
  • Powered by (1) SR44/357 Battery (included)
Schwaben
Part #: 019711SCH01A
Price: $10.46 (USD) 
$13.95 (Sale - Save 25%)
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
E36 M3 Shark Injector Stage 5 Performance Software (HFM/Cam Kit With No Cats)

Stage 5 Performance Software for 1996-1999 E36 M3 (HFM/injectors/cams/headers/no cats)

Conforti Shark Injector performance software tuned for the highest level of our OBD2 kits - Schrick camshafts, "24lb" injectors, Porsche 809 3.5" HFM, intake, headers, and race exhaust (no cats). This software is tuned around the stock S52 manifold but will work with an M50 manifold as well. This software turns down the sensitivity of the post-cat oxygen sensors so that fault codes and check engine lights for no cats will not appear. This is the full-bore Kit - tuned for every bolt-on upgrade we sell.

With this software you will notice more top end power, a broader torque band, and a smoother running engine. The rev limit is raised to 7000 RPM with the top speed limiter removed. Works with 91 or higher octane fuel.

Required:
"24lb" injectors (actually around 26lb injectors when used at the S52's 3.5 bar of fuel pressure). You must confirm the injector flow-rate at 3.5 bar before using this software. If the injectors were not purchased from us, we may as for the Bosch part number on your injectors.
Porsche 809 3.5" HFM (0 280 217 809) (TMS/Porsche HFM works best) with intake. Note: this will not work with a Euro HFM, 540 HFM, or Dinan HFM. Our software is programmed and written specifically for the Porsche 809 HFM! If you did not purchase the HFM Kit from us, we may ask you for the Bosch part number from your HFM.
Schrick camshafts
Headers (TMS Shorty Headers or similar)
Cat-delete (such as with the AA Track Pipe)

Optional Speed Sensor Delete: Since this software is intended for race or track use only, there is one additional feature we can build into the programming. The Speed Sensor is built into the diff cover - an area prone to excessive heat. During endurance races or very hot track days, the sensor can malfunction or actually melt. If the engine DME does not see this signal, it will restrict RPM to 5500, obviously killing your speed! This optional Speed Sensor delete programming will tell the DME not to care if the sensor is sending a signal or not. It will set the maximum RPM to 7000 RPM electronically.

This part alters or deletes the emissions equipment on your car. Because of this, we require a waiver of emissions compliance to be signed and sent in to TMS. You can download the waiver here.


Shark Injector Installation Instructions
(click to expand)
Shark Injector installation instructions
A capable battery charger is required for the installation. The charger provides backup power supply to the regular car battery during installation. It must be capable of holding a continuous 10amp charge for the full installation (15-20 minutes).
The minimum octane fuel for this software is 91.
Shark Injector FAQ
(click to expand)

This item fits the following BMWs:
1996-1999 E36 BMW M3

 

Shark Injector
Part #: N3TKAT
Price: $449.00 (USD) 
Ships in 2 Days
Free Shipping Free Shipping
E36 328/528/Z3 Shark Injector Stage 3+ Performance Software (Cams/M50 Manifold)

Stage 3+ Performance Software for E36 328i/is/ic, E39 528i, and Z3 2.8 (M50 Manifold + M3 Cam Kit)

Conforti Shark Injector performance software tuned for the awesome OBD2 package: M50 manifold, M3 S52 camshafts, and intake. This software makes full use of the benefits of the M50 manifold when used with cams and intake. Without the software, you're not getting the full effect of these upgrades in the upper rev range. The stock software, or a regular Shark Injector, is tuned for low-end torque using the stock manifold and cams. It's like a marathon runner in a 40-yard dash: he'll put in a good effort but won't be the quickest! Special attention was paid to the low-end and mid-range too so that torque was not lost with the M50 manifold.

With this software you will notice more top end power, a broader torque band, and a smoother running engine. The rev limit is raised to 7000 RPM with the top speed limiter removed. Works with 91 or higher octane fuel.

Required:
E36 M3 MZ3 S52 stock camshafts
M50 intake manifold

Shark Injector Installation Instructions
(click to expand)
Shark Injector installation instructions
A capable battery charger is required for the installation. The charger provides backup power supply to the regular car battery during installation. It must be capable of holding a continuous 10amp charge for the full installation (15-20 minutes).
The minimum octane fuel for this software is 91.
Shark Injector FAQ
(click to expand)

This item fits the following BMWs:
1996-1999 E36 BMW 328i 328ic 328is
1997-1998 E39 BMW 528i
1997-1998 Z3 BMW 2.8

 

Shark Injector
Part #: TMS5469
Price: $349.00 (USD) 
Ships in 2 Days
Free Shipping Free Shipping
E36 M3 Style Mirror Kit - For all 1992-1999 E36 3 Series Get the look of the E36 M3 mirrors at a fraction of the cost! These mirrors are a great low-cost alternative to the Genuine BMW E36 M3 mirrors (which we also offer). The mirrors are electric and heated, plug into your cars stock mirror wiring connector in seconds (no "wiring" required), and come primed ready to paint. Professional painting is recommended. This set of mirrors includes both driver and passenger side mirrors. (left hand drive ONLY)

These mirrors fit all 1992-1999 E36 3 series including 318i, 318is, 318ti, 325i, 325is, 328i, 328is, and 323is. We carry these for 2 door, 4 door, convertible and 318ti models, simply select which style you need (below).
Turner Motorsport
Part #: TMS1636
Price: $124.95 (USD) 
In Stock
3-series Rear Suspension Mount Package - Solid Race Bushings - E36/E36 M3 Rear Suspension Mounts With No Flex or Deflection for Improved Handling, Response, and Long Life
Building a track-only or racecar means swapping out the flexible rubber bushings and mounts for non-distorting solid pieces. The stock rubber bushings have serious drawbacks when used hard on the racetrack - they wear out quickly, and the flexible material allows extreme changes in alignment. Switching to solid bushings will eliminate the deflection and flex, keeping the suspension motions in their intended alignment and providing more feedback to the driver. On the E36, solid bushings can help prevent rear subframe failure as the sheetmetal chassis will no longer flex along with the rubber mount. Depending on the bushing's intended purpose, the material we use is either aluminum or Delrin. Delrin is a dense plastic material that has almost zero deflection and long life. It's self-lubricating so it won't ever need grease or lube. All of our bushings are designed by our in-house R&D engineers and tested on our various racing cars, with many used in professional racing series around the world.

If you're building a car for a racing class, the parts and materials you can change to are specified in the rules. Consult your rulebook or tech steward for any clarification. As these bushings have no play or deflection in them, they are not intended for street-focused cars - they do not absorb impacts and vibration like rubber will.

We offer bushings for the following suspension points -
subframe mounts x 4 (aluminum)
inner-upper control arm bushings x 2 (aluminum with bearing)
differential mounts x 3 (1 Delrin, 2 aluminum)
outer upper/lower control arm bushings x 4 (OE-spec replacements) (steel with bearing)
trailing arm bushings (RTABs) x 2 (aluminum with bearing or Delrin)
suggested: front control arm bushings (FCABs) (Delrin)
suggested: rear shock mounts (RSMs) x 2 (aluminum with bearing)

Notes
Note 1: there is also a inner-lower camber arm bushing. We never developed a solid bushing for this point because every racing class allows adjustable camber arms to be used in this location and we offer those with solid inner bushings.
Note 2: some racing classes require a non-bearing bushing for the rear trailing arm bushings. In cases like this, we use a Delrin bushing.
Note 3: the outer upper and lower bushings are already a monoball-style bearing from the factory on all M3 models. They are a great design and last a long time. We offer them as direct replacements or as upgrades for the non-M3 models.

This item fits the following BMWs:
1992-1998 E36 BMW 318i 318is 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
Turner Motorsport
Part #: TMS11752
Price: $118.96 (USD) 
$169.95 (Sale - Save 30%)
In Stock
Free Shipping Free Shipping
on orders $199 and up
ITG Foam Filter for Eurosport/Conforti Intake Kits This is a replacement ITG foam air filter for use in the Conforti or Eurosport Intake. The ITG filter was chosen for its superior airflow over other types of cone filters while still retaining strong filtration capabilities. ITG may not be as famous in America as other brands, but it's one of the most popular filters in Europe and Asia. ITG Filters can be found in Championship-winning Touring Cars, Japanese SuperGT winners, ALMS, Grand-Am, and even Formula 1.

These filters come in 3" and 3.5" opening (see below for applications) or check your filter box for correct appliaction.

Click here for approved cleaning methods for ITG foam filters.  Filters do not come pre-oiled so we strongly recommend purchasing a can of dust retention oil at the same time as a new filter.

Applications:
3.5": all Euro HFM kits (E36 M3, MZ3), E46 330, E46 325 M56 SULEV, E39 530, E39 540, Z3 3.0
3.0": all other models not listed above (E36 M3/MZ3 with stock HFM, E36 325/328, E46 323/328, E39 525/528, Z3 2.3/2.8)
Turner Motorsport
Part #: TMS3431
Price: $84.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $199 and up
UUC EVO3 Short Shift Kit - E36 M3 with Euro 6 speed transmission New EVO 3 edition! UUC's latest update has resulted in even smoother shifts, a reduction in vibration, and more features! UUC redesigned all of the pivot points in the shift linkage to reduce notchiness. The result is a shifter that is 35% shorter than stock but feels closer to the stock effort. And new internal dampening material doesn't transmit vibration to the shift knob. All UUC Short Shifters are height-adjustable over a 3/4" range - giving you the same ergonomic comfort as the original. UUC's Short Shift Kits include: T-304 stainless steel shift lever, sealed lower pivot bearings, and new installation hardware. Delrin shifter carrier bushings are optional. This is the best Short Shifter money can buy!

Want the ultimate shifter feel, with the least amount of lateral play? Upgrade this kit by adding a UUC Dual Shear Selector Rod ("DSSR" for short). A DSSR can be added to any shifter setup (stock or aftermarket, including this UUC EVO3), and when combined with the EVO3, you will have the most accurate, most precise, and simply the best shift setup available for your BMW. To upgrade this EVO3 kit to include a DSSR, simply choose from the options below. To read more about the DSSR, click here .

This item fits the following BMWs:
1994-1998 E36 BMW M3 with Euro 6 Speed Transmission
UUC
Part #: USSE62
Price: $328.10 (USD) 
$374.95 (Sale - Save 12%)
In Stock
Free Shipping Free Shipping
Daytona 2014 Livery Decal Set for Fujimi BMW Z4 GT 2013 Model Build your own Turner Z4 GTD / GT3 1:24 Scale Model! This decal sheet contains livery graphics to model the Turner Motorsport BMW Z4 as raced at the 2014 Daytona 24 hours. Decals are die cut for accuracy and fitment. The livery decals were created using our original livery design files, so we can vouch for its overall accuracy. The completed model looks incredible!

This graphics decal set is specifically designed for the Fujimi brand 1/24th scale BMW Z4 2013 kit. Model sold separately. Assembly required
Turner Motorsport
Part #: MSH-94
Price: $20.00 (USD) 
Ships on Dec 29, 2017
Free Shipping Free Shipping
on orders $199 and up
Turner BMW 17.5mm Wheel Spacers (Pair) - Most BMWs (see applications)

17.5MM (.69 inch) Wheel Spacer for BMW E24, E28, E30 M3, E31, E32, E34, E36, E38, E46, E60, E63, E82, E83, E87, E90, E91, E92, E93 (E9X), Z3, Z4

Wheel spacers are the ideal solution to resolve a number of fitment and aesthetic problems --

  • Correct wheel offset issues
  • Achieve a flush fitment instead of the "tucked under" look
  • Clearance the wheel from contact with other components (suspension, brakes, etc).
  • Improve handling and stability by increasing track width

A spacer fits between the wheel and the hub assembly and pushes the wheel out by the thickness of the spacer. Our wheel spacers are compatible with almost any type of BMW wheel and are a direct fit to the wheel hub (see below for any fitment notes). Longer wheel bolts or wheel studs are required.

These latest generation of the Turner Motorsport Wheel Spacers represent a total redesign of the wheel spacer concept - a ground-up, clean sheet design based on our years of BMW service and motorsports. We took everything we have learned from our service technicians, customers, and race team crew and built the spacer to beat all spacers. We've been in the BMW wheel spacer business probably longer than anybody and when it came time to make our own spacers, a basic spacer design just wouldn't do. We had to make a spacer that is light weight (for lower unsprung mass), has a tough and durable coating to last through our New England winters, is easily removed (your mechanic will thank you), and is precisely engineered and manufactured for a proper fit on the hub and in the wheel. You won't find a better engineered wheel spacer on the market!

Turner Wheel Spacer Features --
+ hub-centric design, 1-piece spacer
+ precise tolerance fitment thanks to CAD process and CNC mill machine
+ aerospace grade aluminum  light weight but very strong with a high resistance to corrosion
+ additional military-spec hardcoat for further corrosion resistance
+ innovative Quick Release pockets for easy removal (better than a chamfered back edge)
+ laser engraved size and part number for easy identification
+ stealthy anthracite or black color
+ extended bolt sets in factory-matching black or bright silver finish available (wheel stud kits also available)
+ Turner Motorsport track and street tested!
+ Made in the USA

Extended Wheel Bolts
Longer wheel bolts or wheel studs are required for all BMW wheel spacers. Spacers cannot be used with stock bolts. Our extended lug bolts are a very high quality and high grade steel lug bolt (grade 10.9). We offer two finishes to get you just the right look with your wheels - black zinc to maintain a factory BMW appearance or a bright zinc nickel finish to go with polished wheels. Zinc finishes are designed to withstand 700 hours of salt spray testing.

Spacer Specs:
(click to expand)
Spacer Specs:
bolt pattern:5 x 120
center bore:72.6mm
hubcentric?yes
wheel pad size:normal

Year & Model Applications
(click to expand)
2008-2012 E82 BMW 128i 135 1M
1988-1991 E30 BMW M3
1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
2007-2012 E93 BMW 328i 335i M3 - Convertible
1976-1981 E12 BMW 528i 530i
1982-1988 E28 BMW 524td 528e 533i 535i 535is M5
1989-1995 E34 BMW 525i 530i 535i 540i M5
2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i M5
1982-1989 E24 BMW 633csi 635csi M6
2004-2010 E63 BMW 645ci 650i M6
1981-1987 E23 BMW 733i 735i
1988-1994 E32 BMW 735i 735il 740i 740il 750il
1995-2001 E38 BMW 740i 740il 750il
1990-1999 E31 BMW 840i 840ci 850i 850ci 850csi
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
2009-2016 Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
Turner Motorsport
Part #: TWH9905018
Price: $97.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $199 and up
Schwaben Low Profile 2 Ton Aluminum Floor Jack With Aluminum 3-Ton Jack Stands

Having a low profile floor jack can be a great asset for your garage, perfect for those with a lowered car as well as those that aren't. Most car owners with a lowered vehicle have been in the position of their floor jack not making the clearance needed, the low profile jack is the answer. 

  • Dual pump pistons raises the saddle to maximum height in only 5 pump strokes, with minimum effort.
  • Special low profile thick frame side plates and reinforced lift arm for added strength and use.
  • Wide track front wheels help provide chassis torsion control and durability.
  • Angular positioned pump pistons provide maximum effective pump stroke even when jack is completely under the vehicle.
  • Ball bearing mounted rear swivel caster wheels for easy maneuverability.
  • Side mounted handles for carrying and easy positioning.
  • Overload and bypass safety valve prevents jack overload and over extension.
  • Two piece quick release padded handle for storage or transport.

Details:

  • Jack Capacity 2 Ton
  • Max Lift Height 20"
  • Low Height 3.25"
  • Chassis Length 26.5"
  • Overall Width 13"
  • Saddle Diameter 4.5"
  • Handle Lenght 50"
  • Shipping Weight 50 lbs

The ultra light Schwaben jack stands only weigh 4.7 lbs each. Fit and finish on these stands just shows how much pride in workmanship goes into our stands.These stands are all aluminum construction with heavy-duty  flanged bases to safely stabilize loads. Features 6 locking positions for a secure load in multiple heights. The load pin is extra heavy duty at .584 in. diameter and features a posi lock ball to insure pin stays in place.  

Min. Height is 10.6".

Max Height is 15.4".

Large 7" diameter base.

Outer support tube is 2-1/8" in diameter.

Schwaben
Part #: 011362sch01aKT
Price: $266.92 (USD) 
$355.90 (Sale - Save 25%)
In Stock
Quantity:   
Schwaben 2-Pc 67

These ramps never scoot, slip or slide while rolling onto the ramps.All that said means these ramps are easy to drive up on and very safe. Our Schwaben ramps will never scratch or blemish your floors.

Having ramps to use offers more than just convenience, it offers safety. Laying under a car working is much easier to do knowing the car is resting the wheels on a firm surface.

Please refer to chart below to see if these 67" Schwaben ramps are right for you vehicle.

1. Take a yardstick, and wedge it under the front edge of front tire.

2. Raise it up until it hits the underside of your car( the spoiler)

3. Measure from the tip of the yardstick to the ground, vertically.

 67 " long,14" wide, 10" lift height, at 15 lbs each and a low 10.8 degree incline.

If your measurement is 7.25" or greater, you can clear these ramps with no problem. 

These extensions will lower your approach angle to 6.6 degrees. Once you get the car into place, you can remove the extensions for more working room under the vehicle. One set holds up to 3000 lbs.

For increased safety, use wheel chocks with all Schwaben Ramp products.

Schwaben
Part #: 006160sch01aKT
Price: $356.25 (USD) 
$475.00 (Sale - Save 25%)
Ships on Jan 3, 2018
Quantity:   
Liqui Moly Manual Transmission / Differential Fluid 85w90 - 1 Liter

Interval oil changes are often recommended for manual transmissions to ensure long-term reliability and maximum wear prevention. Fresh oil will prevent small amounts of metallic build up from preventing fluid flow and clogging filters and narrow channels. 

Check your owner's manual to determine when it is best to flush your system and what type and weight fluid to use when re-filling your system. 

This 85w90 weight oil's multi-viscosity are perfect for ensuring protection in all climates and its synthetic composition allows for smoother shifts.

APPROVALS:

  • API GL5
  • MAN 342 Typ M1
  • MB-Freigabe 235.0
  • MIL-L 2105 D
  • ZF TE-ML 16C
  • ZF TE-ML 17B
  • ZF TE-ML 19B
  • ZF TE-ML 21A
  • ZF Freigabenummer ZF000695

Liqui-Moly is a German chemical company that offers top of the line engine oils, additives, and car care products that are designed to extend the life of your engine and ensure the best lubrication and cleanliness off engine and transmission components possible. With more than 50 years of experience and reviews across the world from magazines and race teams, Liqui-Moly proves time and time again why they are one of the most innovative lead forces of performance automotive chemicals in the world.

Liqui-Moly
Part #: 20010
Price: $8.96 (USD) 
$9.95 (Sale - Save 10%)
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
HARD Motorsport Fire Wall Block Off Plate - BMW E36

This Fire Wall Block Off Plate is the perfect solution for sealing off the engine bay from the cab in gutted track cars. It is pre-curved and has a bead roll to help retain its shape and keep out engine pollutants and other dangerous conditions. This plate mounts to factory locations and takes only minutes to install, needing no drilling, tapping, or welding. 

Fits both left and right side drive vehicles.

Use of silicone during installation can help create a tighter seal. Also, heat-reflective material can be used to help reduce heatsoak in the cabin.

 

Fits the following vehicles:

E36 BMW  All Sub-models

HARD Motorsport
Part #: HARD.FIREWALL
Price: $40.50 (USD) 
$45.00 (Sale - Save 10%)
In Stock
Free Shipping Free Shipping
Quantity:   
HARD Motorsport Window Deflectors - PAIR - BMW E36

HARD Motorsport's window deflector pairs are a perfect option to increase the aerodynamic properties of your E46 BMW. Designed to reduced drag and resistance, these deflectors prevent air from flowing into your interior, allowing for faster acceleration times.

Features:

  • Aluminum
  • Lightweight
  • Powder-coated
  • Mounts in Factory Locations
  • No Drilling/Hardware Needed

Compatible with HARD Motorsport polycarbonate rear windows.

 

Fits the following vehicles:

E36 BMW All coupe models

HARD Motorsport
Part #: WDEFLECT.E36
Price: $34.20 (USD) 
$38.00 (Sale - Save 10%)
Direct Ship
Free Shipping Free Shipping
Quantity:   
HARD Motorsport Cooling Backing Plates  --  BMW E36 355mm Big Brake

The Brake Cooling Backing Plates from HARD Motorsport features a design that creates a pocket that forces cool air directly into the rotor from the hat so that built up up doesn't have time to lead to premature brake failure and wear. For any sporty or track driven vehicle, this is an absolute must have! It is made from lightweight solid aluminum and is power-coated for extra protection and appearance. They are installed into OEM mounting locations using stock hardware.

For use with the HARD Motorsport Complete Brake Cooling Duct Kit.

Fits the following vehicles:

E36 BMW All vehicles with a 355mm Big Brake Kit conversion

HARD Motorsport
Part #: BACKPLTE.E36.355
Price: $179.99 (USD) 
$199.99 (Sale - Save 10%)
In Stock
Free Shipping Free Shipping
Quantity:   
HARD Motorsport Polycarbonate Rear Windows BMW E36

Polycarbonate windows are an easy way to save 50% weight in comparison to stock window glass. HARD Motorsport's rear windows are abrasive resist and provides protection against chemicals and UV yellowing and hazing. Also, 3M vinyl is used around the edges in order to keep an OEM Factory look. These windows are designed to be used with original window gaskets.

Priced as a Pair.

**Does not include window mounting hardware**

Fits the following vehicles:

E36 BMW All 2 Door coupe sub-models

HARD Motorsport
Part #: LXN.WND.E36.2D
Price: $180.00 (USD) 
$200.00 (Sale - Save 10%)
Direct Ship
Free Shipping Free Shipping
Quantity:   
E30, E36, E46, Z3, Z4 ECS Ultimate Performance Rear Shock Mount Kit (RSM)

Want a race-spec rear shock mount but with the comfort of a factory bushing? This ECS rear shock mount combines the precision and articulation of a spherical bearing with the isolation of urethane bushings. The stainless monoball bearing is lined with PTFE lubricant and suspended in 80A urethane and housed in a hard anodized 6061-T6 aluminum mount. The spherical bearing is a better design than most rear shock mounts because it allows the shock to move and tilt without side-loading the shock shaft (which leads to premature failure of the shock). Most Genuine BMW and aftermarket shock mounts are not designed for shock angles and the stress that track or performance driving will put on the shock shaft. The ECS shock mount is properly designed to handle these loads. The internal bearing is also replaceable - it will be years before you have to replace the entire mount. The ECS mount is fully encapsulated to prevent the common shock mount failure of the stock mount design.

ECS RSM features:

  • Maintenance free, PTFE lined, stainless steel monoball spherical bearing for full shaft articulation
  • 80A polyurethane isolation bushings for NVH control
  • Accommodates 10mm, 12mm, or 14mm damper shafts
  • Fully constrained shaft mount makes RSM blow out impossible
  • Hard anodized 6061-T6 construction
  • Fully rebuildable design

* - the RSM comes with the BMW standard 10mm shock shaft bushings. 12mm is used on some performance shocks and 14mm is used on some true motorsport rear shocks.

ECS
Part #: 002542ECS01
Price: $179.95 (USD) 
Ships on Jan 2, 2018
Free Shipping Free Shipping
on orders $199 and up
Turner offset Polyurethane Front Control Arm Bushing - 80A - Pre-Installed In Brackets - E36, Z3, E30

Here at Turner we understand the importance of an upgrade that will get the results you need on the track and still be tolerable on the drive around town. When it comes to control arms on the track, making them as stiff as you can (usually using solid mounts) is the best way to increase your driving precision by eliminating the deflection of rubber. The next best thing to create a balance would be to stiffen up the control arm with polyurethane, giving you the option of a more stock like feel with 80a or closer to the solid feel with 95a durometers.

When it comes to the E36 chassis you also get the options of choosing a stock centered design or going with the E30 inspired offset bushing to increase castor, further taking advantage of improvd handling. These poly bushings will give your control arms a direct connection between your suspension and the body of the car eliminating the slop felt under take-off and braking so you feel more in control of your vehicle.

This item fits the following BMWs that use a centered-style bushing: 

1984-1991 E30 BMW 318i, 318is, 325, 325e, 325es, 325i, 325is 
1992-1999 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic
1996-1999 E36 BMW M3 S52
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i MZ3 M Coupe M Roadster 

Turner Motorsport
Part #: 012633TMS02-03
Price: $129.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Complete Turner Baffled Oil Catch Can Kit - Standard Flow 8oz

When we designed this catch we wanted to have the most function options available, the best separation method, and the easiest to service. The Turner engineered catch cans offer a pre-setup design based ion desired flow direction, however this does not limit you to this flow. The inner baffle orientation can be easily adjusted to flow in both directions in case you decide to move this catch can to a different vehicle. A 4 chamber system  baffle system inside the catch can was engineered to create multiple changes in the direction of airflow within the separator to cause oil droplets to fall out of suspension before exiting the catch can. Having a closed / recirculated design reduces oil ingestion and promotes cleaner emissions and odor-less operation.

Our catch can was also designed with the idea that the cans fill level can easily be checked with a top mounted dipstick and an optional use bottom drain hole. The drain system comes complete with a valve and hose to be mounted at a lower area of the vehicle so when you're doing an oil change you can drain the catch can.

Features:

  • 6061-T6 billet machined body, anodized black for lasting protection and appearance
  • Strategically positioned 4 chamber baffle system maximizes oil / air separation 
  • Knurled and black anodized oil dipstick makes inspecting oil volume of reservoir clean and simple
  • Sealed with a pre-installed viton O-Ring
  • Includes 2.5mm allen key to remove baffle plates for cleaning
  • Engineered to create multiple changes in the direction of airflow within the separator to cause oil droplets to fall out of suspension before exiting the catch can
  • Closed / recirculated design reduces oil ingestion and promotes cleaner emissions and odor-less operation
  • Optional use drain hole - drain kit included!
  • Universal mounting kit
Turner Motorsport
Part #: 022798tms01-07KT
Price: $189.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Cool Carbon S/T PLUS Performance Brake Pad Set - Front - E32, E34, E36 M3, E46 M3, MZ3

Owned and operated by performance driving enthusiasts, Cool Carbon Performance not only has the German pedigree known for engineering rigor and excellence, but their experience with club, track and racing events has given them a special sensitivity to the unique needs of today's daily street performance drivers.

For their latest Street Performance PLUS Brake Pad release, special consideration was given to build materials and R&D test results.

In Cool Carbon's new dedicated brake pad facility, they've developed a new proprietary “low-Met” formula utilizing Twaron Aramid fibers, similar to Kevlar material, that rapidly dissipates heat and resists wear and was developed and subjected to a test protocol that included friction, temperature, and wear monitoring.

The stunning results of these efforts are seen in their real world performance: greater linear and predictable initial bite that the previous S/T pads, consistent braking torque, superior resistance to heat-cycling, proven fade resistance, and crucially reduced dust levels.

BMW owners will also notice a welcomed measure of practicality and drivability with Cool Carbon products. The “grabby” tendency often felt with OEM BMW brakes is eliminated; the CC brake compound allows for a much more controllable and linear application of brake pressure and a much greater degree of modulation.

Features:

  • Excellent for spirited street driving and light to moderate track use
  • Increase in stopping power while remaining street friendly
  • Very linear, smooth pedal modulation
  • Low to no noise or dust - rotor friendly!
  • Faster heat dissipation allowing consistent performance at higher temperatures, even greater than previous S/T pad's performance
  • Processed using “true positive molding”; pads molded individually to pressure for exacting performance; density and compressibility specifications are controlled for each pad, maintaining specific performance attributes.
  • Developed at an all new German R&D facilities; tested extensively on the German autobahn; fine tuned at the renowned Nurburgring race circuit
  • New brake pad curing process and triple scorching for a faster initial bedding period
  • New pad formula with Twaron Aramid in the composite for greater thermal stability and better long term durability compared to other high performance pads
  • Improved break pad shims for more efficient noise reduction

Turner Motorsport recommends using the Cool Carbon Street Performance rear brake pads to maintain an ideal braking balance, preventing major brake bias or uneven wear characteristics.

This item fits the following BMWs:
1995-1999 E36 BMW M3
2001-2006 E46 BMW M3
1989-1995 E34 BMW 525i 530i 535i 540i M5
1988-1994 E32 BMW 735i 735iL 740i 740iL 750iL
1998-2002 Z3 BMW Z3 M Coupe M Roadster

Cool Carbon Performance
Part #: 7284-D394PL
Price: $118.36 (USD) 
$147.95 (Sale - Save 20%)
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Turner Motorsport Poly Tow Strap With Bolt - Red, Blue, Black - E30 E36 E46 E9X Our polyester tow strap is far and above the best tow strap available for the modern BMW chassis. We use a heavy-duty, chemical-resistant polyester strap webbed around a stainless steel stud. There is plenty of length available for tow hooks to grab onto without hitting your bumper and damaging paint or causing cracks. The precision-cut stud is fits E30 (89+), E36, E46, E82, E90, E92, Z3, and Z4. We have further refined the shape and size of the bolt so that spoiler modifications are kept to a minimum. Note that on some models you may need to modify the bumper slightly for the best fit.

A tow strap is a better pickup point than a fixed steel ring, which will add weight and protrude past the bumper. Some racing series have banned the steel rings because they increase the likelihood of contact during close racing. Our straps are sold in bright red, bright blue, or black (red suggested for racing use as it makes it easy for tow truck operators and safety crews to spot). On some models, the strap may be tucked behind the bumper panel when not on track, which makes this perfect for dual-use track/street cars and full racecars alike. Priced per strap so order two for the front and rear.

This item fits the following BMWs:
1989-1991 E30 BMW 318i 318is 325i 325is
2008-2012 E82 BMW 128i 135i 1M Coupe
1992-1999 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2006 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2013 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
2009+ Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
Turner Motorsport
Part #: TMI9020TSI
Price: $84.96 (USD) 
$99.95 (Sale - Save 15%)
In Stock
Free Shipping Free Shipping
on orders $199 and up
Limited Edition #94 Turner Motorsport Z4 GTD Minichamps - 1 of 300 Limited Edition 1 of 300.

Celebrate a piece of Turner Motorsport history with this Limited Edition Minichamps 1:43 resin model of the BMW Z4 GTD which won the 2014 IMSA Tudor United Sportscar Championship!This Z4 GTD was driven by Dane Cameron and Markus Palttala to both the driver and team titles! This car won at tracks such as Laguna Seca, Watkins Glen, Road America and Virginia International Raceway (VIR). Complete with the official livery including sponsors H&R Springs, Northwest, Borla, Escort, Motul, Continental Tires and Recaro. This 1:43rd scale model is extremely detailed and manufactured by the renowned Minichamps.

This limited edition collectors item makes the perfect gift this holiday season. Get the BMW race fan or enthusiast on your list the No. 94 Turner Championship Z4.
Turner Motorsport
Part #: TMS222774
Price: $84.95 (USD) 
In Stock
Free Shipping Free Shipping
Quantity:   
Rear Trailing Arm Bushings (RTAB) - Turner Monoball Race - E36, E46, Z4 (Pair) Made in the USA Our Monoball Rear Trailing Arm Bushings are the best solution for completely elimination deflection and unwanted toe changes on the rear of the E36, E46, and Z4. While rubber and urethane bushings flex during load, the toe can change widely giving you nervous and unpredictable handling. These RTABs have a solid aluminum housing with a high-quality race bearing. These bushings were developed over years of competition use in various racing and HPDE events. There is simply no better RTAB unless your racing class rules prohibit the use of mono or spherical bearings.

The rear trailing arm bushings take a lot of abuse from acclerating, braking and cornering. The stock rubber bushings are just not up to the task of keeping rear wheel alignment in spec for very long, especially if you have upgraded to stickier tires and a better suspension. The pliable rubber flexes and twists which slows down reaction time and leaves you with a car that feels nervous and 'tail happy'. Urethane helps to control the alignment but issues with fitment, maintenance, and longevity keep us from recommending urethane on anything but a street car. We also offer a Delrin RTAB for cars that must conform to certain racing class rules. These aluminum spherical bearings are the best at controlling rear toe alignment.

Our aluminum RTABs are very well made - high grade aluminum alloy and steel CNC'd out of a billet by an ISO 9001 certified manufacturer, each component is either hardcoated or nickel plated. The bearing is extra wide to accept higher loads and is replacable for a nominal cost. While multiple manufacturer’s offer two piece designs, our research showed that a one piece bushing is a better design.

Because solid bushings transmit more noise, vibration, and harshness we do not recommend their use on any street car. These are sold for race or track-prepped cars only.

Clickhere for installation instructions.

This item fits the following BMWs:
1992-1998 E36 BMW 318i 318is 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
2003-2008 Z4 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
Turner Motorsport
Part #: TSU9980020
Price: $223.96 (USD) 
$279.95 (Sale - Save 20%)
In Stock
Free Shipping Free Shipping
Quantity:   
Schwaben Coolant Refill/Air Purge Tool

When it comes to BMW's we all know the weak point is commonly in the cooling system, many models proving hard to bleed the air pockets out after the refresh. The coolant refill tool solves this problem, ensuring that you get an air pocket free fill. The entire task is as simple as draining the system like normal, reinstalling the drain plugs and hooking the tool up to your refill location. The reason this tool works so well is due to the venturi valve, it converts air pressure from the compressor to vacuum inside the cooling system, then with a twist of a valve sucks coolant right into the system using the vacuum pressure.  

This tool requires access to a standard air compressor with a minimum rating of 90 PSI (6.2 bar).  A convenient, though not required part to complete the job is a container large enough to hold the entire coolant mixture capacity for your vehicle.  This will dramatically reduce the risk of any unwanted air being drawn into the system.  This tool is designed to refill the cooling system after it has been drained.

 

Schwaben
Part #: 003466SCH01
Price: $57.71 (USD) 
$76.95 (Sale - Save 25%)
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
ECS Tuning Wheel Spacer & Bolt Kit - 12.5mm - 72.6mm CB

Drastically improve the looks of your vehicle while improving your vehicle's handling characteristics and/or easily adjust your wheel fitment to allow for the proper clearance when installing parts such as new wheels, big brake kits, or lowering suspension components.Interference from components such as shocks, springs, or control arms are a common issue when installing wheel that are not a direct OE size replacement. By moving your wheels a few millimeters each, you can give yourself enough clearance for proper wheel fitment and give your car a wider stance in the process.

ECS Tuning wheel spacers are constructed of high quality 6061-T6 aircraft grade aluminum and are specifically designed by in-house engineers and cnc machined to exact standards, ensuring the best fitment possible. By carefully measuring the OEM wheel hubs and bore dimensions, these spacers mount with minimal clearance to prevent any vibration, retaining the stock-like vibration free operation. 

This kit includes wheel bolts that are lab tested to meet or exceed ISO 898 class 10.9 mechanical and physical properties to ensure perfect fastening of the wheel to the hub with no issues or potential to snap under aggressive driving conditions.

ECS Tuning is a performance and genuine parts provider that designs their ECS Tuning branded aftermarket automotive parts in-house to ensure the highest quality and affordability possible. Every part's design is subjected to a rigorous test fit and stress test period to guarantee proper fitment and continued reliability for years to come.

 

This item fits the following BMWs:

2008-2012 E82 BMW 128i 135 1M
​1988-1991 E30 BMW M3
1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
2007-2012 E93 BMW 328i 335i M3 - Convertible
1982-1988 E28 BMW 524td 528e 533i 535i 535is M5
1989-1995 E34 BMW 525i 530i 535i 540i M5
2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i M5
1982-1989 E24 BMW 633csi 635csi M6
2004-2010 E63 BMW 645ci 650i M6
1981-1987 E23 BMW 733i 735i
1988-1994 E32 BMW 735i 735il 740i 740il 750il
1995-2001 E38 BMW 740i 740il 750il
1990-1999 E31 BMW 840i 840ci 850i 850ci 850csi
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
2009-2016 Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is

ECS
Part #: ECS#254KTWB
Price: $99.95 (USD) 
Ships on Jan 9, 2018
Quantity:   
ECS Tuning Wheel Spacer & Bolt Kit - 15mm - 72.6mm CB

Drastically improve the looks of your vehicle while improving your vehicle's handling characteristics and/or easily adjust your wheel fitment to allow for the proper clearance when installing parts such as new wheels, big brake kits, or lowering suspension components.Interference from components such as shocks, springs, or control arms are a common issue when installing wheel that are not a direct OE size replacement. By moving your wheels a few millimeters each, you can give yourself enough clearance for proper wheel fitment and give your car a wider stance in the process.

ECS Tuning wheel spacers are constructed of high quality 6061-T6 aircraft grade aluminum and are specifically designed by in-house engineers and cnc machined to exact standards, ensuring the best fitment possible. By carefully measuring the OEM wheel hubs and bore dimensions, these spacers mount with minimal clearance to prevent any vibration, retaining the stock-like vibration free operation. 

This kit includes wheel bolts that are lab tested to meet or exceed ISO 898 class 10.9 mechanical and physical properties to ensure perfect fastening of the wheel to the hub with no issues or potential to snap under aggressive driving conditions.

ECS Tuning is a performance and genuine parts provider that designs their ECS Tuning branded aftermarket automotive parts in-house to ensure the highest quality and affordability possible. Every part's design is subjected to a rigorous test fit and stress test period to guarantee proper fitment and continued reliability for years to come.

 

This item fits the following BMWs:

2008-2012 E82 BMW 128i 135 1M
​1988-1991 E30 BMW M3
1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
2007-2012 E93 BMW 328i 335i M3 - Convertible
1982-1988 E28 BMW 524td 528e 533i 535i 535is M5
1989-1995 E34 BMW 525i 530i 535i 540i M5
2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i M5
1982-1989 E24 BMW 633csi 635csi M6
2004-2010 E63 BMW 645ci 650i M6
1981-1987 E23 BMW 733i 735i
1988-1994 E32 BMW 735i 735il 740i 740il 750il
1995-2001 E38 BMW 740i 740il 750il
1990-1999 E31 BMW 840i 840ci 850i 850ci 850csi
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
2009-2016 Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is

ECS
Part #: ECS#255KTWB
Price: $104.95 (USD) 
Ships on Feb 26, 2018
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben Impact Screwdriver Kit - 6 Pieces

The impact driver is a fast and effective way to remove tight or corroded screws and bolts, reducing the chance of rounding off--or rounding out--the fastener head. Insert a slotted or Phillips head screwdriver bit into the driver.

For stubborn bolts, remove the black screwdriver bit adapter head, and replace it with any 3/8 - inch drive socket.

Features:

  • Impact driver tool with red rubber grip 
  • Four screwdriver bits (2 Phillips; 2 slotted) 
  • 3/8 - inch drive bit holder

 

Schwaben
Part #: pcs2800
Price: $12.71 (USD) 
$16.95 (Sale - Save 25%)
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben European Car Electrical Terminal Tool Kit - 12 Pieces

This tool comes in handy especially when working with an engine harness. Certain areas are always prone to corrosion and this tool makes having to re-pin a connector a breeze.

Unlike small screwdrivers, picks, and paper clips, these tools are the correct size and shape to remove and install tiny electrical pins and terminals at plastic block connectors with ease, and will not damage the connectors in the process.

Packaged in a blow molded case to keep everything secure and organized.

Schwaben
Part #: ce-70-2
Price: $80.00 (USD) 
$89.95 (Sale - Save 11%)
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
aFe Pro5R Air Filter - E36, E46, E34, E39, Z3, Z4 6 cylinder This is a drop-in stock replacement aFe performance air filter that installs into your BMW's factory airbox. This particular filter fits the following BMWs:

E36 3 series : 323i 323is 323ic 325i 325is 325ic 328i 328is 328ic M3 1992-1998
E46 3 series : 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3 1999-2005
E39 5 series : 525i 528i 530i 1997-2003
E83 X3 : X3 2.5i X3 3.0i 2004-2006
Z3 : Z3 2.3 2.5 2.8 3.0 1997-2002
E85 Z4 : Z4 2.5i Z4 3.0i M54 engine 2004-2006

This version uses aFe's highest flowing filter media, which uses a lightly oil gauze to filter out dirt and particulates, while allowing more air to flow to the intake. For the best flowing filter, with the best performance gain, we always recommend this standard aFe filter media (often called "Pro5R ", which has a blue pre-oiled filter media). We also carry this filter in the "ProDry" grey filter media, which is oil-free for only slightly less performance and no maintenance.
AFE
Part #: 30-10015
Price: $68.40 (USD) 
$76.00 (Sale - Save 10%)
In Stock
Free Shipping Free Shipping
Quantity:   
Schwaben Rocker Jack Pad Adapter

Specially designed to be stronger than alternatives on the market, this jack pad adapter makes the vehicle lifting procedure faster, safer, and easier than ever before. Simply remove the rocker jack point access plug, fully insert the Schwaben Jack Pad Adapter, and lift securely using your hydraulic floor jack.

Features:

  • Heat treated 4140 high strength steel
  • Fully seam welded 70mm jacking plate
  • Exact-fit profile for limited movement in vehicle
  • Black zinc coated for corrosion resistance
  • Long shaft to position jack plate away from the body for adequate jack clearance

Note: Always secure your vehicle on jack stands. Never rely on a floor jack alone.

Schwaben
Part #: 001852SCH01A
Price: $29.96 (USD) 
$39.95 (Sale - Save 25%)
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben 12-19mm Multi size Socket Wrench

The Schwaben 8-in-1 drain plug socket wrench. Take one wrench that fits most common metric drain plugs with external hexagonal heads. Six-point socket heads grip securely and won’t round off plug heads.

Features:

  • Made of vanadium steel with polished chrome finish
  • Strong magnet on the side of the handle to hold the drain plug until you are ready to reinstall it
  • Sizes include: M12, M13, M14, M15, M16, M17, M18, and M19
Schwaben
Part #: W-136PM
Price: $14.96 (USD) 
$19.95 (Sale - Save 25%)
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben 1/2

Proper torque is very important when it comes to working on engines. The importance comes from proper sealing and to keep from damaging threads.

Features:

  • Reversible ½-inch drive click-to-stop
  • Torque range of 10 to 150 ft-lb
  • Accurate to within +/-4%
  • 18 inches in length with a convenient carry case
Schwaben
Part #: TW-12450
Price: $29.96 (USD) 
$39.95 (Sale - Save 25%)
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben Deep Well Impact Socket - 46mm

This large socket is the perfect tool for axle nuts when servicing the axle shafts or wheel bearings.

Features:

  • ½-inch drive 46mm 12-point socket
  • Specially hardened to take the added abuse from a impact gun
  • Coated for added protection and so you can tell it apart from non impact rated sockets
  • 75mm depth  to accommodate many applications and different length shafts
  • Made of durable chrome moly steel

 

 

Schwaben
Part #: 003302SCH03A
Price: $14.96 (USD) 
$19.95 (Sale - Save 25%)
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Billet Aluminum Oil Filter Housing Cap - M52 M54 BMW uses a lot of plastic in their engine components to save weight and money. Unfortunately, plastic is damaged easily and the factory oil filter cap needs a special tool to remove. This aluminum cap is much more durable and features a standard 17mm hex and 36mm hex posts on the top. 17mm is also the size of your engine oil drain plug, reducing the number of tools that you need to complete an oil change. This cap is designed to use the original o-ring seal so no special parts are required. You only have to remove the original 'filter cage' from the original cap and transfer it to the new aluminum cap. The satin black anodize blends in with the rest of your engine bay making this a smart and subtle upgrade.
ECS
Part #: 002605ECS01A
Price: $89.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben Strut Nut Socket - 22mm To secure shocks and struts to their mounts, the retaining nut must be torqued to its proper specification using a torque wrench. An improper torque value may result in premature mount failure - or worse. Strut nut sockets allow for the use of an allen wrench to hold the damper shaft while utilizing your 1/2" drive torque wrench on the socket to achieve proper torque.
Schwaben
Part #: 003046SCH01A-04
Price: $11.21 (USD) 
$14.95 (Sale - Save 25%)
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
ECS Rear Trailing Arm Bushing Limiter Set

The E36/E46 rear trailing arm bushings (RTABs) wear out faster than any other bushing on the car. Worn RTAB will cause excessive toe alignment change and give a 'loose' or 'floaty' feeling in the rear handling. One of the reasons for this is that they over-extend during motion, stretching and twisting the rubber in all directions. These shims sit on either side of the bushing and limit the amount of extension from the bushing. Not only will you get more life from your RTAB but these will help stiffen the bushing during cornering. But during normal driving you will still have all of the comfort of the stock rubber bushings. These part about these bushings is how easy they are to install - simply slide them in place during your bushing install. They can be added to pre-installed bushings too by dropping the trailing arm and removing the cage around the bushing.

Works with stock rubber bushings only (not urethane or Delrin).

ECS
Part #: 003301ECS01AKT
Price: $49.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben Locking Hose Clamp Pliers

These Schwaben flexible reach hose clamp pliers can reach where others can not.

Feature:

  • Spring loaded clamp with a 24" cable
  • Designed to remove metal or plastic self-tightening hose clamps
  • Work with diameters from 11/16" to 2-1/2" ( 18 to 54mm)

These pliers feature a spring loaded clamp with a 24" cable and will lock onto the clamp and hold open for easy removal. These pliers are designed to remove metal or plastic self-tightening hose clamps with diameters from 11/16" to 2-1/2" ( 18 to 54mm).

Schwaben
Part #: 004170SCH01A
Price: $29.21 (USD) 
$38.95 (Sale - Save 25%)
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Telescoping Hood Prop

It only takes a gust of wind to have your hood crashing down on your head, or if you have a carbon fiber hood and no longer have the gas struts than this could be what you need.

 This hood prop is adjustable, lightweight, and sturdy making it easy to keep out of the way in the trunk so it's there whenever you need it. 

Schwaben
Part #: 006056SCH01A
Price: $14.96 (USD) 
$19.95 (Sale - Save 25%)
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Trailer Ramps 5

Is your trailer door ramp too steep to get your car into the trailer, 

Load your vehicle safer and easier with Schwaben trailer ramps. Our trailer ramps create a more gradual angle to prevent spoiler damage when loading and unloading vehicle into or out of trailer.

Features:

  • These ramps work on cars weighing up to 6,000 pounds
  •  Ideal for low ground clearance cars with extra wide tires.
  • Will not scratch or mark your floors!
  • Will not scoot, slip or slide no matter the surface
  • Will not damage trailer door or trailer
  • Light weight at only 15 lbs
  • Highly durable, virtually indestructible, and very stable
  • Ramps have built in straps to allow transport or ability to be hung on the wall.
  • 67" long, 14" wide, 5" tall.

Note: if your current stock trailer ramps have an additional fold down ramp, we suggest you either fold it up or remove it.

Schwaben
Part #: 006167SCH01A
Price: $231.00 (USD) 
$308.00 (Sale - Save 25%)
Ships on Jan 3, 2018
Quantity:   
Wheel Chocks - Pair Always make sure to chock your wheels when lifting one end of the car, this ensures the car stays in place and up in the air.
Schwaben
Part #: 006190SCH01A
Price: $24.00 (USD) 
$32.00 (Sale - Save 25%)
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben 2-pc 67

These ramps never scoot, slip or slide while rolling onto the ramps.All that said means these ramps are easy to drive up on and very safe. Our Schwaben ramps will never scratch or blemish your floors.

Having ramps to use offers more than just convenience, it offers safety. Laying under a car working is much easier to do knowing the car is resting the wheels on a firm surface.

Please refer to chart below to see if these 67" Schwaben ramps are right for you vehicle.

1. Take a yardstick, and wedge it under the front edge of front tire.

2. Raise it up until it hits the underside of your car( the spoiler)

3. Measure from the tip of the yardstick to the ground, vertically.

 67 " long,14" wide, 10" lift height, at 15 lbs each and a low 10.8 degree incline.

If your measurement is 7.25" or greater, you can clear these ramps with no problem. 

 

For increased safety, use wheel chocks with all Schwaben Ramp products.

Schwaben
Part #: 006160SCH01A
Price: $264.00 (USD) 
$352.00 (Sale - Save 25%)
In Stock
Quantity:   
aFe ProDry S Air Filter - E36 318i 318is 318ti, Z3 1.9 This is a drop-in stock replacement aFe performance air filter that installs into your BMW's factory airbox. This particular filter fits the following BMWs:

E36 3 series : 318i 318is 318ic 318ti 1992-1998
Z3 : Z3 1.9

This version has an oil-free filter media for less maintenance. For the best flowing filter, with the best performance gain, we always recommend the standard aFe "Pro5R " filter (which has a blue pre-oiled filter media), but this oil-free filter flows only slightly less than the blue Pro5R style aFe filter, and requires no re-oiling after cleaning the filter.
AFE
Part #: 31-10046
Price: $59.40 (USD) 
$66.00 (Sale - Save 10%)
Direct Ship
Free Shipping Free Shipping
Quantity:   
aFe ProDry S Air Filter - E30 1986-1991 (no M3), 86+ 528e, E34 525i (M20), E32 750iL (x2) This is a drop-in stock replacement aFe performance air filter that installs into your BMW's factory airbox. This particular filter fits the following BMWs:

E30 3 series : 318i 318is 1990-1991 - 318ic 1990-1993
E30 3 series : 325e 325es 325i 325is 325xi 325ic 1986-1991
E28 5 series : 528e 1986-1988
E34 5 series : 525i 1989-1990 M20 engine
E32 7 series : 750il 1988-1994 - 2 required
E31 8 series : 850i 850ci 850csi 1991-1999 - 2 required

This version has an oil-free filter media for less maintenance. For the best flowing filter, with the best performance gain, we always recommend the standard aFe "Pro5R " filter (which has a blue pre-oiled filter media), but this oil-free filter flows only slightly less than the blue Pro5R style aFe filter, and requires no re-oiling after cleaning the filter.
AFE
Part #: 31-10047
Price: $43.20 (USD) 
$53.00 (Sale - Save 18%)
$53.00
Limited Qty Sale
In Stock
Free Shipping Free Shipping
Quantity:   
Schwaben Water Pump Pulley Holder for Removal of Fan Clutch Replacing the fan clutch on most BMW models requires holding the water pump pulley while removing the fan clutch lock nut. With less than 1 1/2" clearance on some models this project can easily turn into a mechanical nightmare. Using our special slim line fan clutch wrench in conjunction with the appropriate pulley spanner, the removal and installation required only a few moments.
Schwaben
Part #: 001170SCH01A
Price: $18.71 (USD) 
$24.95 (Sale - Save 25%)
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben Radio Removal Tool Kit - 32 Pieces

The radio removal tool make removal of the stock radio easy, offering just the right design so there is no damage.

Features:

  • 32-piece Master Radio Removal Kit removes most German radios, plus radios in many Asian and Domestic makes
  • Come in a handy blow-molded case with silhouetted compartments for each tool, making it easy to transport and keep track of individual keys and tools
  • Many keys have comfortable rubber padded grips
Schwaben
Part #: AAR-32PCS
Price: $37.46 (USD) 
$49.95 (Sale - Save 25%)
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
6MM Silicone Vacuum Hose - Black - 9 Feet Car suffering from vacuum leaks? This vacuum hose has a 6mm inner diameter. 
Forge
Part #: vc06b
Price: $15.26 (USD) 
$16.95 (Sale - Save 10%)
In Stock
Quantity:   
5MM Silicone Vacuum Hose - Black - 9 Feet Car suffering from vacuum leaks? This vacuum hose has a 5mm inner diameter. 
Forge
Part #: vc05b
Price: $12.56 (USD) 
$13.95 (Sale - Save 10%)
In Stock
Quantity:   
Schwaben 12 Ft 6 Gauge Booster Cables Looking for a high quality set of jumper cable to keep around for emergencies? These are it, don't settle for cheap budget sets found at most places.
Schwaben
Part #: 007269SCH01
Price: $20.21 (USD) 
$26.95 (Sale - Save 25%)
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben Mechanics Stethoscope

This tool is ideal for finding unusual vibrations or suspected leaks. 

Features:

  • Aluminum alloy probe to determine noise location fast
  • Rubber trumpet to check for vacuum leaks and pressure flow noise
  • High quality surgical PCV hose for long life and increased sound definition
Schwaben
Part #: 005965SCH01A
Price: $14.96 (USD) 
$19.95 (Sale - Save 25%)
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben 6 Liter Fluid Extractor/Filler System

6-Liter Extractor/Filler System makes oil, ATF or any type of fluid change a snap. Easily change to pump-in/out with the flip of a lever.

Features: 

  • Extendable foot step for stable use when pumping
  •  All adapters mount on the tank for convenient storage of the 9 included adapters
  • 5-foot main tube features a quick disconnect and shut off valve
  • Included is a 24" long and 3/8" OD tube with quick connect nipple
  • Manual pump and requires no electricity or air pressure to operate
  • Extract up to 6-Liters of new fluid from barrel, bucket or bottle into the tank, turn handle to out position to fill into your vehicle

 

Now Available:  Optional Dipstick extracting tube set 

Schwaben
Part #: 007221SCH01A
Price: $127.46 (USD) 
$169.95 (Sale - Save 25%)
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben 3-Liter European Pressure Brake Bleeder

We know bleeding brake alone is not only no fun, but much more complicated than it needs to be. Having a pressure bleeder give you the ability to keep pressure on the brake system while you go under and crack open the bleeder screws to relieve the air pockets.

 

Features:

  • Holds a full 3-Liters ( 3.17 qts) of brake fluid
  • Easy to read 0-30 lbs pressure gauge built into the tank top
  • Pressure relief valve for safe release of pressure
  • 40" hose with detachable swivel fitting
  • Do not  exceed 20 PSI
  • One-year warranty
Schwaben
Part #: 007237SCH01A
Price: $37.46 (USD) 
$49.95 (Sale - Save 25%)
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben 7mm Hose Clamp Flexible Driver

Makes those hard to reach hose clamps much easier to loosen up.

Features:

  • 7mm driver
  • 6"  flex shaft
  • Overall length of 10-1/2"
  • No-slip grip resistant to wet or oil coated hands

 

Schwaben
Part #: 010658SCH01A
Price: $8.21 (USD) 
$10.95 (Sale - Save 25%)
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben Telescoping Round Mirror

Great for working in tight spacers when you can't get a good eye on the issue.

 

Features:

 

  • Offers an 9-1/2" to 29" extendable handle with a stainless steel shaft
  • 2-1/4" mirror head mounted on a dual swivel for a full 360 degree rotation
  • Cushion grip rubber handle works great with dry or oily hands
Schwaben
Part #: 010772SCH01a
Price: $7.46 (USD) 
$9.95 (Sale - Save 25%)
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben Universal Adapter Kit For Brake Bleeding This adapter is for use with the 3-Liter Multi-Functional Fluid Pump Kit  and  3-Liter European Pressure Brake Bleeder  only and allow for fitment on other brake fluid reservoir fitment. 
Schwaben
Part #: 007311SCH04A
Price: $14.96 (USD) 
$19.95 (Sale - Save 25%)
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
HARD Motorsport Aluminum Racing Pedal Kit - BMW E36

The stock E36 pedal assembly has a weak plastic hinge that could crack and wear over time, or even snap under aggressive heel-toe action. Hard Motorsport has solved this with a fully milled aluminum aftermarket pedal set that utilizes factory mounting points and connects directly to the control mechanism. The accelerator pedal is also adjustable to ensure proper pedal control under all circumstances.

We do recommend replacing the springs at the time of install. Please purchase T#64735. 

FEATURES:

  • SOLID ALUMINUM CONSTRUCTION
  • FULL ACCELERATOR PEDAL ASSEMBLY
  • 3-POSITION ADJUSTABLE ACCELERATOR PEDAL FOOT REST
  • FACTORY MOUNTING WITH NO NEED FOR COMPLICATED MODIFICATIONS
  • MATCHING BRAKE & CLUTCH PEDAL COVERS - CURVED TO MATCH STOCK PEDAL PROFILE
  • LIGHT WEIGHT
  • MOUNTING HARDWARE INCLUDED
HARD Motorsport
Part #: HARD.RACEPEDAL_X
Price: $251.10 (USD) 
$279.00 (Sale - Save 10%)
Direct Ship
Quantity:   
Schwaben Aluminum 3-Ton Jack Stands - Pair

Safety is always the most important factor when it comes to working under your car, jack stands are highly recommended. 

 

Features:

  • Ultra light  jack stands only weigh 4.7 lbs each
  • All aluminum construction with heavy-duty  flanged bases to safely stabilize loads
  • 6 locking positions for a secure load in multiple heights
  • Extra heavy duty load pin at .584 in. diameter with a posi lock ball to insure it stays in place
  • Min. Height is 10.6
  • Max Height is 15.4"
  • Large 7" diameter base
  • Outer support tube is 2-1/8" in diameter

 

Schwaben
Part #: 005945SCH01A
Price: $64.46 (USD) 
$85.95 (Sale - Save 25%)
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben Professional Quality Deluxe Two Shelf Service Cart

Having convenient carts make organizing a breeze and passing that on to getting the job done well.

Features:

  • Beautiful & durable high gloss black powder coated finish
  • 350lbs load capacity supports heavy tools, parts and equipment
  • Dual handles allow Push-Pull from either side for better maneuverability
  • Rugged thru tray frame construction for stable support
  • 3" Deep trays 
  • Large, easy to maneuver 4" ball bearing casters (2 are locking)

 

Dimensions:

  • Height - 35.3"
  • Length - 30"
  • Width - 16"
  • Weight - 37.5lbs
Schwaben
Part #: 005947SCH01A
Price: $89.95 (USD) 
$117.95 (Sale - Save 24%)
In Stock
Quantity:   
Schwaben 3/8

A professional quality ratchet with a fine satin finish for comfort, durability, and easy clean-up.  

Features:

  • 200mm(7.75") long ratchet
  • Special designed 72T gear mechanism uses only 5 degree handle movement between gears
  • Push button release holds socket tight until you are ready to release. No more dropped sockets

Limited Lifetime Warranty 

 

Schwaben
Part #: 005985SCH01A
Price: $17.21 (USD) 
$22.95 (Sale - Save 25%)
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben 4 Pc Plier Set

Having a nice set a pliers can make a big difference on the ease of getting the job done. Schwaben pliers are designed around comfort and keeping them clean.

Features:

  • 7" Diagonal cutter pliers
  • 8" extra long needle nose pliers with cutter and round jaw grip.
  • 8" Slip joint pliers has two settings
  • 10" Groove joint pliers with 4 settings
Schwaben
Part #: 008927SCH01A
Price: $35.21 (USD) 
$46.95 (Sale - Save 25%)
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben 3-piece Euro Style Locking Plier Set

No more pinched fingers or dropping as they unlock. This style locking lever is all one hand operation. Can be unlocked with lower finger while still gripping plier. Others require a two hand operation.

Features:

  • 7" Straight Jaw Locking Pliers
  • 7" Curved Jaw Locking Pliers
  • 6" Needle Nose Locking Pliers
Schwaben
Part #: 008917SCH01A
Price: $23.96 (USD) 
$31.95 (Sale - Save 25%)
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
ECS Urethane Transmission Mounts

A sloppy shifter is one of the common complaints of older BMWs. In addition to the shifter linkage the transmission mounts contribute to rough and clunky shifting. BMW transmission mounts are rubber and get softer over time. This allows the transmission to dance around which changes the geometry of the shift linkage and could make it harder to shift. These urethane transmission bushings are stiffer than the stock rubber mounts and won't let the transmission shift around as much. The round design also has more surface area than the stock mounts which helps spread the load. Because the urethane is stiffer, expect more vibration to make its way into the shift lever area. Engine motor mounts should also be considered as a cause for driveline vibration, transmission movement, and poor shifting. Consider replacing your motor mounts at the same time as your tranny mounts.

Price is for the pair of transmission mounts with hardware.

This item fits the following BMWs: 
1989-1995  E34 BMW  525i 530i 535i 540i M5 
1992-1998  E36 BMW  318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3 
1997-2003  E39 BMW  525i 528i 530i 540i M5 
1999-2005  E46 BMW  323i 323ci 325i 325ci 328i 328ci 330i 330ci M3 
2008-2012  E82 BMW  128i 135i 1M Coupe 
2006-2011  E90 BMW  325i 328i 330i 335d 335i - Sedan 
2006-2012  E91 BMW  328i - Wagon 
2007-2013  E92 BMW  328i 335i 335is - Coupe 
2007-2013  E93 BMW  328i 335i - Convertible 
1997-2002  Z3 BMW  Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe 

ECS
Part #: 002705ECS
Price: $69.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $199 and up
Shark Injector Upgrade (from One File To Another)

You may be able to upgrade the Shark Injector file to another version to better meet your tuning needs. Depending on the model we may have better tunes for things such as intakes, larger air sensors, camshafts, headers, and others. For a small fee the current Shark Injector tune can be removed and a new file added instead (the original Shark file you were using would no longer be available). To do this, we need the car restored to stock settings with the current Shark Injector and then returned to us (updating via USB is not yet available). Sharks that were not Restored to stock cannot be upgraded and the unit will be returned to you (at your expense). We also perform other work on the Shark Injector while it is here, including diagnostic tests and re-packaging with the most current instructions. The Shark that you get back is virtually new and ready to be reinstalled!

To get started, review the catalog of current Shark Injector files for one that better matches your tuning spec.
1. Enter the new tuning file in the form below. Include any other relevant information.
2. Click the Update Price or Add To Cart button.
3. Complete the online transaction with your address and payment information.
4. A Turner Motorsport sales rep will contact you after your order has been submitted. Do not send in your Shark Injector until someone has contacted you with a reference number and return shipping address.

Turn-around time for upgrades is typically the same day we receive it. UPS Ground is the normal return shipping method unless you specify faster shipping on your order. 

Helpful Links:

  • Shark Injector File List - listing of all Shark Injector files by vehicle model. Select a file from this list to upgrade to.
  • Shipping Instructions - specific instructions for packaging and shipping. Also includes a contact form to include when you send back your Shark.
  • Emissions Waiver - some tunes require this emissions/smog waiver before we can program the new file to your Shark. These are noted in the catalog listing in the links above. Print and include this Waiver when you send in your Shark.
Shark Injector
Part #: SHARK-UPGRADE
Price: $150.00 (USD) 
Ships in 2 Days
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
E36 325i/328i/M3, E34 525i Supersprint Tubolare Long-Tube Performance Headers

Free ground shipping! 

The Supersprint headers are among the best on the market for making the most top-end power on the M50/S50US engines. These are a long-tube equal length design which maximizes airflow for excellent power gains. On their own these can be good for 12-15hp (and more with other modifications). These are the real deal stainless steel headers with beautiful construction and design (often copied for cheap auction sites but made from mild steel).

Supersprint exhaust is widely recognized as the leader in complete exhaust system upgrades - extremely high quality, well designed for optimal flow, and amazing sound. Even at a premium price Supersprint is an unbeatable exhaust design because every aspect is done to such a high level. Most Supersprint systems are built with larger diameter piping to improve exhaust flow which helps the engine do less work and make more horsepower! Supersprint exhausts generally run at a premium over other systems but no other system on the market can match their quality, performance, or reputation!

 

section:headers

connects to:Supersprint center section or stock cat section (with modification)

material:T304 stainless steel

 

This part alters or deletes the emissions equipment on your car. Because of this, we require a waiver of emissions compliance to be signed and sent in to Turner Motorsport. You can download the waiver here.



This item fits the following BMWs:
1992-1995 E36 BMW 325i 325is 325ic M3
1996-1999 E36 BMW 328i 328is 328ic M3, when used on a racecar with OBD1 or similar engine management and emissions equipment removed
1991-1995 E34 BMW 525i

Supersprint
Part #: 785501KT
Price: $929.96 (USD) 
$1239.95 (Sale - Save 25%)
In Stock
Free Shipping Free Shipping
Quantity:   
Turner Offset Polyurethane Front Control Arm Bushing - 80A - E36, Z3, E30

Here at Turner we understand the importance of an upgrade that will get the results you need on the track and still be tolerable on the drive around town. When it comes to control arms on the track, making them as stiff as you can (usually using solid mounts) is the best way to increase your driving precision by eliminating the deflection of rubber. The next best thing to create a balance would be to stiffen up the control arm with polyurethane, giving you the option of a more stock like feel with 80a or closer to the solid feel with 95a durometers.

When it comes to the E36 chassis you also get the options of choosing a stock centered design or going with the E30 inspired offset bushing to increase castor, further taking advantage of improvd handling. These poly bushings will give your control arms a direct connection between your suspension and the body of the car eliminating the slop felt under take-off and braking so you feel more in control of your vehicle.

This item fits the following BMWs that use a centered-style bushing: 

1984-1991 E30 BMW 318i, 318is, 325, 325e, 325es, 325i, 325is 
1992-1999 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic
1996-1999 E36 BMW M3 S52
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i MZ3 M Coupe M Roadster 

 

Turner Motorsport
Part #: 012633TMS02-01
Price: $59.95 (USD) 
In Stock
Free Shipping Free Shipping
Quantity:   
E36 M3 Euro/Group N Supersprint Racing Cat Section (Emitec Cats)

Free ground shipping! 

Supersprint exhaust is widely recognized as the leader in complete exhaust system upgrades - extremely high quality, well designed for optimal flow, and amazing sound. Even at a premium price Supersprint is an unbeatable exhaust system because every aspect is done to such a high level. A Supersprint exhaust rewards you with a terrific sound, long lasting construction and excellent fitment. The Supersprint sound is very 'European' which fits the sporting sophistication of BMWs perfectly. Most systems are also modular - sections can be added or removed to custom tailor the exhaust sound to your preferance. Aside from 'Race' systems, their mufflers meet European noise laws so you get a refined and tuned sound without being excessively loud. Most Supersprint systems are built with larger diameter piping to improve exhaust flow which helps the engine do less work and make more horsepower! Supersprint exhausts generally run at a premium over other systems but no other system on the market can match their quality, performance, or reputation!

NOTE: Supersprint engineers and manufactures complete exhaust systems. This part was designed to be used with the rest of the Supersprint system on this car but may be used on its own. Contact us for more details.

This part alters or deletes the emissions equipment on your car. Because of this, we require a waiver of emissions compliance to be signed and sent in to Turner Motorsport. You can download the waiver here.

Supersprint
Part #: 043602
Price: $2223.80 (USD) 
$2965.06 (Sale - Save 25%)
Ships on Jan 11, 2018
Free Shipping Free Shipping
Quantity:   
E36 M3 Euro Supersprint Racing Muffler (2x 70mm Tips)

Free ground shipping! 

Supersprint exhaust is widely recognized as the leader in complete exhaust system upgrades - extremely high quality, well designed for optimal flow, and amazing sound. Even at a premium price Supersprint is an unbeatable exhaust system because every aspect is done to such a high level. A Supersprint exhaust rewards you with a terrific sound, long lasting construction and excellent fitment. The Supersprint sound is very 'European' which fits the sporting sophistication of BMWs perfectly. Most systems are also modular - sections can be added or removed to custom tailor the exhaust sound to your preferance. Aside from 'Race' systems, their mufflers meet European noise laws so you get a refined and tuned sound without being excessively loud. Most Supersprint systems are built with larger diameter piping to improve exhaust flow which helps the engine do less work and make more horsepower! Supersprint exhausts generally run at a premium over other systems but no other system on the market can match their quality, performance, or reputation!

NOTE: Supersprint engineers and manufactures complete exhaust systems. This part was designed to be used with the rest of the Supersprint system on this car but may be used on its own. Contact us for more details.

Supersprint
Part #: 043606
Price: $673.10 (USD) 
$897.46 (Sale - Save 25%)
Ships on Jan 8, 2018
Free Shipping Free Shipping
Quantity:   
E36 323is Supersprint Connecting Pipes for Racing Muffler (409 Stainless)

Free ground shipping! 

Supersprint exhaust is widely recognized as the leader in complete exhaust system upgrades - extremely high quality, well designed for optimal flow, and amazing sound. Even at a premium price Supersprint is an unbeatable exhaust system because every aspect is done to such a high level. A Supersprint exhaust rewards you with a terrific sound, long lasting construction and excellent fitment. The Supersprint sound is very 'European' which fits the sporting sophistication of BMWs perfectly. Most systems are also modular - sections can be added or removed to custom tailor the exhaust sound to your preferance. Aside from 'Race' systems, their mufflers meet European noise laws so you get a refined and tuned sound without being excessively loud. Most Supersprint systems are built with larger diameter piping to improve exhaust flow which helps the engine do less work and make more horsepower! Supersprint exhausts generally run at a premium over other systems but no other system on the market can match their quality, performance, or reputation!

NOTE: Supersprint engineers and manufactures complete exhaust systems. This part was designed to be used with the rest of the Supersprint system on this car but may be used on its own. Contact us for more details.

Supersprint
Part #: 043453
Price: $149.10 (USD) 
$198.80 (Sale - Save 25%)
Ships on Jan 11, 2018
Free Shipping Free Shipping
Quantity:   
E36 318is Supersprint Connecting Pipes for Racing Muffler (304 Stainless)

Free ground shipping! 

Supersprint exhaust is widely recognized as the leader in complete exhaust system upgrades - extremely high quality, well designed for optimal flow, and amazing sound. Even at a premium price Supersprint is an unbeatable exhaust system because every aspect is done to such a high level. A Supersprint exhaust rewards you with a terrific sound, long lasting construction and excellent fitment. The Supersprint sound is very 'European' which fits the sporting sophistication of BMWs perfectly. Most systems are also modular - sections can be added or removed to custom tailor the exhaust sound to your preferance. Aside from 'Race' systems, their mufflers meet European noise laws so you get a refined and tuned sound without being excessively loud. Most Supersprint systems are built with larger diameter piping to improve exhaust flow which helps the engine do less work and make more horsepower! Supersprint exhausts generally run at a premium over other systems but no other system on the market can match their quality, performance, or reputation!

NOTE: Supersprint engineers and manufactures complete exhaust systems. This part was designed to be used with the rest of the Supersprint system on this car but may be used on its own. Contact us for more details.

Supersprint
Part #: 043422
Price: $202.37 (USD) 
$269.82 (Sale - Save 25%)
Ships on Jan 11, 2018
Free Shipping Free Shipping
Quantity:   
Driveshaft - E36 318i/is/ic - Manual Transmission 1993-1998

Got a vibration through the driveline on your BMW? Did you know that the u-joints are not replaceable on a factory driveshaft?Our remanufactured driveshafts allow for future replacement of u-joints and are rebuilt to a higher specification than the factory driveshaft.We start with OEM u-joints and then machine yokes onto the driveshaft to allow for future u-joint replacement.All bushings, universal joints, center bearings are replaced with new hardware (flex discs are not included but available separately).The whole unit is then dynamically balanced on a precision Axiline Balancer.

Included in the price of the driveshaft is UPS return label, so you can return your core for refund quickly, easily and without additional expense.

This item fits the following BMWs:
1993-1998 E36 BMW 318i/is/ic with manual transmission

Includes $75.00 core charge to be refunded on return of your rebuildable core.

Turner Motorsport
Part #: 827X
Price: $580.10 (USD) 
Direct Ship
Quantity:   
Driveshaft - E36 318ti - Automatic Transmission

Got a vibration through the driveline on your BMW? Did you know that the u-joints are not replaceable on a factory driveshaft?Our remanufactured driveshafts allow for future replacement of u-joints and are rebuilt to a higher specification than the factory driveshaft.We start with OEM u-joints and then machine yokes onto the driveshaft to allow for future u-joint replacement.All bushings, universal joints, center bearings are replaced with new hardware (flex discs are not included but available separately).The whole unit is then dynamically balanced on a precision Axiline Balancer.

Included in the price of the driveshaft is UPS return label, so you can return your core for refund quickly, easily and without additional expense.

This item fits the following BMWs:
1995-1998 E36 BMW 318ti

Includes $75.00 core charge to be refunded on return of your rebuildable core.

Turner Motorsport
Part #: 939X
Price: $556.90 (USD) 
Direct Ship
Quantity:   
Schwaben Fluid Suction/Fill Pump

This hand held Schwaben tool makes changing fluids an easy, quick task.The Schwaben fluid suction/fill pump suitable for oils, water and any non corrosive liquid.

Features 

  • Comes with a flexible and a rigid tube. 
  • Flow rate is adjustable for different functions.
  • 350 ML capacity
  • Cylinder is marked in 20 mL increments and fraction of quarts for accurate filling. 

Not for use with gasoline.

Schwaben
Part #: 022253SCH01A
Price: $27.71 (USD) 
$36.95 (Sale - Save 25%)
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Liqui Moly Jectron Fuel Injection System Cleaner - 300 mL

Fuel injectors tend to get built up with gunk over the years, eventually affecting the spray pattern and reducing engine efficiency. By using a fuel injector cleaner every 3-4 fill ups (or 1200 miles) like this Liqui-Moly Jectron, you can ensure that your fuel injection system is staying in top shape, giving you the best efficiency possible and preventing a number of potential issues such as poor emissions, lost performance, and rough idle.

Features:

  • Cleans Injectors
  • Reduces Fuel Consumption and Exhaust Emissions
  • Keeps Intake Valves Clean (on vehicles without direct injection only)
  • Restores Performance, Drivability, and Durability
  • Promotes Proper Fuel Atomizing
  • Smooths Idle
  • Allows for Best Throttle Response
  • Allows for Faster Starts and Avoids Surging

Liqui-Moly is a German chemical company that offers top of the line engine oils, additives, and car care products that are designed to extend the life of your engine and ensure the best lubrication and cleanliness off engine and transmission components possible. With more than 50 years of experience and reviews across the world from magazines and race teams, Liqui-Moly proves time and time again why they are one of the most innovative lead forces of performance automotive chemicals in the world.

Liqui-Moly
Part #: 2007
Price: $6.26 (USD) 
$6.95 (Sale - Save 10%)
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Limited Edition #96 Turner Motorsport M6 GT3 Minichamps - 1 Of 402

Turner Motorsport was created with the vision of bringing ultra high performance BMW accessories to avid enthusiasts at a reasonable price. Will Turner opened the doors to his 6500 square foot R&D facility in 1993 - since then the company has seen incredible growth and accomplishment. Most recently, Turner Motorsport participated in the IMSA United Sportscar Championship. Drivers Jesse Krohn and Jens Klingman were able to pilot the Number 96 Turner Motorsport M6 GT3 through the pack and finish fourth overall during the 2017 season.

    While not on the racetrack, the team at Turner can be found designing and testing new products perform just as well on the track as they do on the street. For example, Turner’s E46 rear subframe reinforcement kit resolves a real world problem, the E46’s rear subframe mounting points, by creating a solution that prevents further damage and can be used to remedy and already cracked subframe area. In this way, an extremely detrimental problem can be repaired or prevented no matter what type of driving style the vehicle endures. This is just one example of the philosophy behind Turner Motorsport being put to work in every product they design.

    When it comes to sourcing elusive motorsport specific parts, Turner delivers again. As an authorized dealer, Turner carries a wide range of racing specific parts from BMW Motorsport. Anything from full conversions, such as the M235iR conversion kit, to the more esoteric offerings like the E30 M3 Evo racing pulley kit.

    Now you can bring home a piece of Turner Motorsport History with this beautifully constructed diecast model of the Turner M6 GTD car. This is the same one driven by Jens Klingman and Bret Curtis at Circuit of the Americas in the 2016 season. Accurate and breathtaking detail are at the forefront of this limited edition 1/43 scale model. Only 402 are left so get yours before the checkered flag drops!

 

 

Turner Motorsport
Part #: 96M6GTSMINICHAMP
Price: $84.95 (USD) 
In Stock
Free Shipping Free Shipping
Quantity:   
HARD Motorsport Lightweight Textured Door Panel Set -- E36 BMW Coupe Models

Add these weight saving door panelsfrom HARD Motorsport to your BMW for either daily driver or track conditions. Weighing only 2lbs 11oz, these are lighter than traditional aluminum replacement panels and offer a custom interior appearance. Made of molded thermoformed ABS plastic, they are durable but allow your to make modifications as you would like for any accessories or retained factory speaker. For initial installation, these do not require any major modification or cutting of internal door parts. Includes a nylon door pull strap and all needed installation hardware and stand-offs. Can be painted, vinyl wrapped, or suede flocked for a more custom appearance or left as they are.

Features:

  • Durable Thermoformed ABS Plastic (Black)
  • OEM-Style Appearance for a custom "factory" look and feel.
  • Installs without needing to cut your inner door.
  • Lightweight.  Just 2lbs 11oz each.  (Complete factory panels weigh about 8 pounds each) 
    Over 10.5 lbs in total weight savings over stock.
    Compare to .060 Aluminum Panels weighing 6.5 lbs each.
  • Filled Map Pockets and pull handles.
  • Racing style nylon door pull strap (included)
  • Compatible with original door latches
  • Compatible with our RS Style Door Latch Strap Pull conversion kit.
  • Paintable or can be covered with wrap vinyl or suede flocked for custom appearance.
  • Mounting hardware and custom CAD designed stand-offs included.
  • Available in 2 finishes:  Textured or Smooth

 

Vehicle Application:

1992-1999 E36 BMW All Coupe Sub-models including M3

HARD Motorsport
Part #: DO0RPANEL.E36_TX
Price: $268.20 (USD) 
$298.00 (Sale - Save 10%)
Direct Ship
Free Shipping Free Shipping
Quantity:   
Schwaben 3/8

Looking to update your old torque wrenches? The Schwaben 3/8" Drive Digital Torque Wrench is your answer. 

This digital torque wrench uses an easy-to-read display to show torque amounts and settings, features a push button release, reversible 3/8" drive, 45 tooth ratchet head, and a comfortable no-slip grip and adjustment wheel.

Specifications:

  • Setting Range: 15-80 ft lbs (20-110 Nm)
  • Display Units: ft-lbs, N-m, Inch-lbs, cm-kg2, and m-kg
  • Size: 16" (370mm) length
  • Accuracy: +- 3%
  • Include blow molded holding case
  • Requires one 3V CR2030 battery (included)
Schwaben
Part #: 023382SCH01A
Price: $82.46 (USD) 
$109.95 (Sale - Save 25%)
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Turner Motorsport Reverse Flow 6oz Baffled Catch Can

When we designed this catch we wanted to have the most function options available, the best separation method, and the easiest to service. The Turner engineered catch cans offer a pre-setup design based ion desired flow direction, however this does not limit you to this flow. The inner baffle orientation can be easily adjusted to flow in both directions in case you decide to move this catch can to a different vehicle. A 4 chamber system  baffle system inside the catch can was engineered to create multiple changes in the direction of airflow within the separator to cause oil droplets to fall out of suspension before exiting the catch can. Having a closed / recirculated design reduces oil ingestion and promotes cleaner emissions and odor-less operation.

Our catch can was also designed with the idea that the cans fill level can easily be checked with a top mounted dipstick and an optional use bottom drain hole. The drain hole can be used with a valve and hose to be mounted at a lower area of the vehicle so when you're doing an oil change you can drain the catch can.

Features:

  • 6061-T6 billet machined body, anodized black for lasting protection and appearance
  • Strategically positioned 4 chamber baffle system maximizes oil / air separation 
  • Knurled and black anodized oil dipstick makes inspecting oil volume of reservoir clean and simple
  • Sealed with a pre-installed viton O-Ring
  • Includes 2.5mm allen key to remove baffle plates for cleaning
  • Engineered to create multiple changes in the direction of airflow within the separator to cause oil droplets to fall out of suspension before exiting the catch can
  • Closed / recirculated design reduces oil ingestion and promotes cleaner emissions and odor-less operation
  • Optional use drain hole (valve and hose sold separately, watch for our model specific drain kits!)
Turner Motorsport
Part #: 022798TMS01-04
Price: $139.95 (USD) 
In Stock
Free Shipping Free Shipping
Quantity:   
1995 M3 Schrick Camshaft/Injectors/Chip Upgrade Kit

Schrick camshafts boost mid-high end power for that extra motivation at higher rpm. Low-end torque is not seriously affected due to the M3's VAN0S valve timing.
 

And, higher profile cams work extremely well with an upgraded intake and exhaust. 

Turner Motorsport
Part #: TMS3435PDK
Price: $1718.85 (USD) 
Ships in 2 Days
Free Shipping Free Shipping
Turner Polyurethane Shifter Arm Carrier Bushing - E36 E46 E9X F30 F32 E39 E60

Even after rebuilding your manual transmission shifter with brand new BMW components or installing a short shift kit, your shifts will still be at the mercy of soft factory bushings. Designed with 100% comfort and low manufacturing costs in mind, BMW's factory carrier bushing offers a freedom of movement on all axis, resulting in "factory installed slop". Any manual transmission aficionado knows that when it comes to shifting, slop is the enemy. Causing inconsistent gear locations, embarrassing missed shifts, and an overall experience that is less than confidence inspiring. After servicing countless shifters, our team decided to step in and address this shortcoming. 

Our engineers designed a bushing that was simple to install, requiring no modifications or reuse of old components, and delivers an improved shifting experience with any factory or aftermarket performance shifter. Our carrier bushing is manufactured in the USA from 70A polyurethane, bonded securely to a 304 stainless steel housing for exceptional corrosion resistance.  The result is a complete design solution that offers much crisper shifting and a more engaging driving experience with nearly zero added gearbox noise or vibrations. 

As part of a shifter upgrade, rebuild, or as a standalone component upgrade, our bushing assembly delivers immediate, long-lasting shifting improvements.

**Installation instructions**

Features:

  • Corrosion resistant 304 stainless steel mounting sleeve with bonded 70a polyurethane
  • Stiffer bushing results in crisper shifter feel and a more engaging driving experience.
  • Ready to install out of the box - no modifications required
  • Replaces Genuine BMW part number 25111220707
  • Improved durability over OEM rubber
  • Made in America

Have an older BMW? Our shifter carrier bushing upgrade for older models offers similar performance for your classic BMW and can be found here. 

This item fits the following BMWs:
2008-2013 E82 BMW 128i 135i 135is 1M Coupe
1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2013 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
2007-2013 E93 BMW 328i 335i 335is M3 - Convertible
2015 F80 BMW M3
2012-2015 F30 BMW 320i 320i xDrive 328d 328d xDrive 328i 328i xDrive 335i 335i xDrive - Sedan
2014-2015 F34 BMW 328i xDrive GT - Gran Tourismo
2013-2015F32 BMW 428i 435i 435i xDrive - Coupe
2013-2015 F33 BMW 428i Convertible 435i Convertible - Convertible
2014-2015 F36 BMW 428i Gran Coupe 435i Gran Coupe
2015 F82 BMW M4
1997-2003 E39 BMW 525i 528i 530i
2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i M5
2011+ F10 BMW 535i 550i M5
2004-2010 E63 BMW 645ci 650i M6
2012+ F12 BMW 650i M6
2013+ F06 BMW M6 Gran Coupe
2013+ E84 BMW X1 xDrive28i
2004-2010 E83 BMW X3 2.5i X3 3.0i X3 3.0si
1996-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
2009+ Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is

Turner Motorsport
Part #: 021012TMS02
Price: $32.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben Magnetic Protecta Wheel Socket Set

Schwaben Protecta Sockets have color coded mar-free exterior sleeve  that prevent nicks and scratches left by plain metal sockets. Internal spring loaded magnet holds lug nut in place.

Features:

  • 17mm, 19mm and 21mm Sockets included in a blow molded case.
  • All sockets are 1/2" drive
  • 3-3/8" ( 86mm) long

Use these with your breaker bar or impact gun to remove the tightest wheel bolts and lug nuts: when reinstalling wheels, use them to final torque wheel fasteners to factory specifications.

 

Schwaben
Part #: 016135SCH01A
Price: $44.96 (USD) 
$59.95 (Sale - Save 25%)
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
aFe Intake Tube - E36 M3 (for upgraded 3.5 inch HFM) (Retains ASC) Our new intake boot for E36 M3 with S52 engine and 3.5" Euro HFM retains the stock ASC option while providing a full diameter tube to connect the HFM to the throttle body. Often the 3.5" HFM is used with the a reducer to fit onto the stock intake boot. This upgraded intake boot does not use the reducer which results in greater air flow to the throttle body.

This upgrade kit retains the ASC throttle body when upgrading to a 3.5" EURO MAF sensor. This coupling upgrade was designed to work with aFe’s P/N: 51-12392 / 54-12392, but it can also be used with other competitors intakes. The coupling is constructed of polyurethane for strength and durability. This engineered coupling upgrade increases air flow and velocity by controlling the air intake dynamics. This is a very simple bolt-on product and requires no cutting or drilling.

This item fits the following BMWs:
1996-1999 E36 BMW M3, M3 convertible
AFE
Part #: 54-12399
Price: $44.10 (USD) 
$49.00 (Sale - Save 10%)
In Stock
Free Shipping Free Shipping
Quantity:   
E36 M3 96-99 Stage 4 Turner Motorsport Performance Package 1996-99 E36 M3 Stage 4 Performance Package
Peak Power Gain: +24whp / +25wft-lbs
Rev limit: 7000
Octane: 91 or higher

Stage 4 Performance Package includes:
aFe Euro Cold Air Intake (oiled cotton filter, heat shield, HFM adatper, and intake tube)
Porsche 911 3.5" HFM (Bosch #0 280 217 803 or 0 280 217 809)
Turner HFM wiring harness adapter and bracket
"24lb" fuel injectors
Schrick performance camshafts (264/256 degree)
TMS Shorty headers
TMS Shark Injector performance software
hardware, install instructions

The Stage 4 Package takes the intake/cam Package from Stage 3 and adds our celebrated 'Shorty' headers. These headers are a bolt-on to the engine and stock catalytic converters on the E36 M3. Other headers have to be used as a system with additional exhaust sections required for fitment. Our headers bolt straight on using factory gaskets and hardware and make an excellent mid-range improvement in power.

The TMS Shorty Headers are manufactured in the USA and are CARB-certified. These headers are not cheap, knock-off pieces. They are 100% T-304 stainless steel with ceramic coating. The coating and the stainless steel are crucial for the efficient flow of exhaust gas through the header. Other versions use only mild steel. We have also taken the extra step of adding ports for the secondary air system, allowing your car to remain emissions-compliant.

As with Stage 3, this Package includes the aFe Euro Cold-Air Intake, 24lb fuel injectors, Schrick performance camshafts, Porsche HFM, and special Stage 4 TMS Shark Injector software. This is a further refinement to Stage 3 - boosting top end horsepower while still making more torque down low. Peak power and torque is increased over Stage 3 with significant torque improvements from 5000 RPM.

Related Upgrades -
Underdrive Power Pulley Kit - Underdriving means each component is moving slower which requires less power. The saved horsepower is put back to the engine where it transfers to power at the wheels. Power gains are typically 10hp at the wheels.
Exhaust - Borla or Corsa cat-back muffler for more performance, lighter weight, and a more-aggressive sound. Expect a gain of 5whp with either of these exhausts.

      

This item fits the following BMWs:
1996-1999 E36 M3 (manual transmission)
Turner Motorsport
Part #: TMS-I3THDR
Price: $3455.70 (USD) 
Ships on Feb 20, 2018
Quantity:   
E36 Rear Sway Bar Reinforcement Kit Made in the USA E36 cars with swaybar upgrades will develop cracks where the swaybar bushing mounts to the subframe. The problem becomes worse for cars that are tracked or drifted. Because the swaybar tab is un-reinforced from the factory, you can end up with flexing and twisting which will eventually weaken the welds and snap the tab from the subframe. By welding in this reinforcement you can prevent the mount from twisting. This will go a long way towards preventing a bothersome repair down the road.

Click here for installation instructions.

This item fits the following BMWs:
1992-1998 E36 BMW 318i 318is 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
Turner Motorsport
Part #: TSU3675001
Price: $39.95 (USD) 
In Stock
Free Shipping Free Shipping
Quantity:   
19mm 12x1.5 Turner Yellow Zinc-Coated Race Wheel Nut Turner Motorsport’s five years of endurance competition has taught us many things. One was that not all lug-nuts are made the same. While the standard nuts that we sell are great for daily drivers, HPDE events, and club racing, a beefier and more durable nut was needed for the 3-hour, 6-hour, and 24-hour professional endurance races. During the 24 Hours of Daytona, our crew guys made over 80 tire changes in NASCAR-style pitstops. That kind of abuse from air guns and fast work required the "next level" of lug-nut. These nuts are a high-grade steel with a zinc coating and they incorporate several innovative features.

The wheel-side of the nut has recessed threads so that the nut has to be square to engage the threads. Without the recess, it’s far too easy to start the threads with the nut being crooked.

The 19mm head of the nut is slightly rounded to help the socket find its position.

The zinc plating that we use is reasonably durable without being excessive. With too much coating, the chipped and worn coating fragments can end up in the threads, leading to all sorts of trouble. Anyone who has used nuts repeatedly knows that the coating is not going to last forever. The constant abuse from air guns will chip it all away. So why add weight and the potential for disaster with excess coating? We did away with most of the danger from that with a lighter coating that still resists the tough environment of the track.

Features:
  • Developed for our Grand-Am / Continental race team
  • High grade steel to withstand the extreme abuse of air guns and race conditions
  • Bright yellow zinc plating to help tire changer zoom in on their target quickly and accurately
  • Minimal plating won’t result in excess coating wearing off and “gumming up” the threads
  • 19mm hex to prevent rounding off
  • Rounded top for fast socket engagement
  • Recessed threads to aid in fast nut-to-stud alignment without cross threading
  • We recommend using with Turner Motorsport bullet nose dry-lube wheel studs
    Price is per nut.
  • Turner Motorsport
    Part #: TWH9952R19
    Price: $3.71 (USD) 
    $4.95 (Sale - Save 25%)
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Oil Pan - E36 318i 318is 318ic 1992-1995 M42 engine This aluminum oil pan fits BMW E36 318i 318is 318ic 1992-1995 with M42 engine.

    This item fits the following BMWs:
    1992-1995 E36 BMW 318i 318is 318ti 318ic
    Turner Motorsport
    Part #: 11131727412
    Price: $199.95 (USD) 
    Direct Ship
    Quantity:   
    Tool - 22mm 3/8 Drive 12-point Socket 22mm hex socket with 3/8" drive.
    Turner Motorsport
    Part #: 02010022
    Price: $21.95 (USD) 
    Ships in 3 Days
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    E36 318ti Supersprint Connecting Pipe (Muffler to Center Section)

    Free ground shipping! 

    Supersprint exhaust is widely recognized as the leader in complete exhaust system upgrades - extremely high quality, well designed for optimal flow, and amazing sound. Even at a premium price Supersprint is an unbeatable exhaust system because every aspect is done to such a high level. A Supersprint exhaust rewards you with a terrific sound, long lasting construction and excellent fitment. The Supersprint sound is very 'European' which fits the sporting sophistication of BMWs perfectly. Most systems are also modular - sections can be added or removed to custom tailor the exhaust sound to your preferance. Aside from 'Race' systems, their mufflers meet European noise laws so you get a refined and tuned sound without being excessively loud. Most Supersprint systems are built with larger diameter piping to improve exhaust flow which helps the engine do less work and make more horsepower! Supersprint exhausts generally run at a premium over other systems but no other system on the market can match their quality, performance, or reputation!

    NOTE: Supersprint engineers and manufactures complete exhaust systems. This part was designed to be used with the rest of the Supersprint system on this car but may be used on its own. Contact us for more details.

    Supersprint
    Part #: 786543
    Price: $79.88 (USD) 
    $106.51 (Sale - Save 25%)
    Ships on Dec 22, 2017
    Free Shipping Free Shipping
    Quantity:   
    E36 Euro Clear Front Turn Signals (pair) - E36 4 door & 318ti Euro clear front turn signals and corner lights (pair) for all BMW E36 sedan, coupe, convertible, and hatchback models. Excellent fit and finish, manufactured by Depo. These are a direct replacement for your stock yellow parking light lenses and make a major change in the overall appearance of your car. There’s no question the Euro look is more pleasing to the eyes than the bright orange of the stock corner lights. Nearly all of our lenses are made in Europe. Easy installation that takes just minutes. Amber bulbs included or choose the Stealth bulbs for a cleaner look. Includes part numbers 82199403095 / 82199403096

    This item fits the following BMWs:
    1992-1998 E36 BMW 318i 325i 328i M3 - 4 Door
    1994-1998 E36 BMW 318ti
    Turner Motorsport
    Part #: E36LCL-CLR-3
    Price: $94.06 (USD) 
    Ships on Dec 26, 2017
    Free Shipping Free Shipping
    on orders $199 and up
    Turner BMW 15mm Wheel Spacers (Pair) - Most BMWs (see applications)

    15MM (.59 inch) Wheel Spacer for BMW E24, E28, E30 M3, E31, E32, E34, E36, E38, E46, E60, E63, E82, E83, E87, E90, E91, E92, E93 (E9X), Z3, Z4

    Wheel spacers are the ideal solution to resolve a number of fitment and aesthetic problems --

    • Correct wheel offset issues
    • Achieve a flush fitment instead of the "tucked under" look
    • Clearance the wheel from contact with other components (suspension, brakes, etc).
    • Improve handling and stability by increasing track width

    A spacer fits between the wheel and the hub assembly and pushes the wheel out by the thickness of the spacer. Our wheel spacers are compatible with almost any type of BMW wheel and are a direct fit to the wheel hub (see below for any fitment notes). Longer wheel bolts or wheel studs are required.

    These latest generation of the Turner Motorsport Wheel Spacers represent a total redesign of the wheel spacer concept - a ground-up, clean sheet design based on our years of BMW service and motorsports. We took everything we have learned from our service technicians, customers, and race team crew and built the spacer to beat all spacers. We've been in the BMW wheel spacer business probably longer than anybody and when it came time to make our own spacers, a basic spacer design just wouldn't do. We had to make a spacer that is light weight (for lower unsprung mass), has a tough and durable coating to last through our New England winters, is easily removed (your mechanic will thank you), and is precisely engineered and manufactured for a proper fit on the hub and in the wheel. You won't find a better engineered wheel spacer on the market!

    Turner Wheel Spacer Features --
    + hub-centric design, 1-piece spacer
    + precise tolerance fitment thanks to CAD process and CNC mill machine
    + aerospace grade aluminum  light weight but very strong with a high resistance to corrosion
    + additional military-spec hardcoat for further corrosion resistance
    + innovative Quick Release pockets for easy removal (better than a chamfered back edge)
    + laser engraved size and part number for easy identification
    + stealthy anthracite or black color
    + extended bolt sets in factory-matching black or bright silver finish available (wheel stud kits also available)
    + Turner Motorsport track and street tested!
    + Made in the USA

    Extended Wheel Bolts
    Longer wheel bolts or wheel studs are required for all BMW wheel spacers. Spacers cannot be used with stock bolts. Our extended lug bolts are a very high quality and high grade steel lug bolt (grade 10.9). We offer two finishes to get you just the right look with your wheels - black zinc to maintain a factory BMW appearance or a bright zinc nickel finish to go with polished wheels. Zinc finishes are designed to withstand 700 hours of salt spray testing.

    Spacer Specs:
    (click to expand)
    Spacer Specs:
    bolt pattern:5 x 120
    center bore:72.6mm
    hubcentric?yes
    wheel pad size:normal

    Year & Model Applications
    (click to expand)
    2008-2012 E82 BMW 128i 135 1M
    1988-1991 E30 BMW M3
    1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
    1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
    2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
    2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
    2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
    2007-2012 E93 BMW 328i 335i M3 - Convertible
    1976-1981 E12 BMW 528i 530i
    1982-1988 E28 BMW 524td 528e 533i 535i 535is M5
    1989-1995 E34 BMW 525i 530i 535i 540i M5
    2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i M5
    1982-1989 E24 BMW 633csi 635csi M6
    2004-2010 E63 BMW 645ci 650i M6
    1981-1987 E23 BMW 733i 735i
    1988-1994 E32 BMW 735i 735il 740i 740il 750il
    1995-2001 E38 BMW 740i 740il 750il
    1990-1999 E31 BMW 840i 840ci 850i 850ci 850csi
    1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
    2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
    2009-2016 Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
    Turner Motorsport
    Part #: TWH9905015
    Price: $89.95 (USD) 
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Motive Power Brake Bleeder Tool (Fits most European Cars) The best way how to bleed the brakes on a BMW for the do it yourself BMW owner!

    The Motive Products POWER BLEEDER is the number 1 selling DIY pressure brake bleeder. It operates just like the professional mechanics' tool at a fraction of the price. The bleeder works by attaching to your brake fluid resevoir and pressurzing your brake system as well as supplying more fluid as needed. It essentially simulate the old fashioned "2 man" brake bleeding technique, only without the need for a second person. Not sure how easy it is? Watch the video to the right and see how simple it is!
    Video: How To Bleed BMW Brakes


    The Motive Brake Bleeder works on most European cars, including Alfa Romeo, Audi, BMW, Fiat, Mercedes, Peugeot, Porsche, Renault, SAAB, Volkswagen, Volvo, and all other cars with 45mm threaded hydraulic fluid reservoir caps All bleeders come with a full 1 year warranty. 2 Quart Capacity. Don't be fooled by cheap imitations!

    Choose from either the standard bleeder or premium Black Label Bleeder.
    Standard Bleeder - has a plastic reservoir cap and non-swivel fitting.
    Black Label Bleeder - comes with custom machined aluminum cap and deluxe swivel fitting, an extra length of high grade polyurethane tubing that won't cloud or crack with exposure to brake fluid.

    This brake bleeder fits the following automobiles:
    BMW, Audi, Alfa Romeo, Fiat, Mercedes Benz, Peugeot, Porsche, Renault, Saab, Volkswagon, & Volvo.
    Motive
    Part #: MOT-0100x
    Price: $43.66 (USD) 
    $53.95 (Sale - Save 19%)
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Wheel Bolt for BMW, MINI - 12x1.50 - Black Chrome - fits most BMWs (see list) These 'show quality' black chrome wheel bolts have a satin/luster finish to them that looks better than most other finished bolts, including the factory bolts. The bolt head is also finished off better with a rounded head instead of recessed. If your wheels are perfect, your bolts should be too! These are high grade (10.9) 12x1.50 bolts, in the same size as the stock bolt or to be used with a small 5-8mm spacer.

    Price is per bolt (each). You can enter your quantity after pressing the Update Price button below or from the shopping cart.






    + Emblem Application Specifics
    (click here to check your car)
    These black satin wheel bolts fit the following BMWs:
    2008-2012 E82 BMW 128i 135i 1M Coupe
    1984-1991 E30 BMW 318i 318is 318ic 325e 325es 325i 325ic 325is 325ix M3
    1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
    1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
    2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
    2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
    2007-2013 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
    2007-2013 E93 BMW 328i 335i M3 - Convertible
    1982-1988 E28 BMW 524td 528e 533i 535i 535is M5
    1989-1995 E34 BMW 525i 530i 535i 540i M5
    1997-2003 E39 BMW 525i 528i 530i 540i M5
    2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i M5
    1982-1989 E24 BMW 633csi 635csi M6
    2004-2011 E63 BMW 645ci 650i M6
    1988-1994 E32 BMW 735i 735il 740i 740il 750il
    1995-2001 E38 BMW 740i 740il 750il
    1990-1999 E31 BMW 840i 840ci 850i 850ci 850csi
    1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
    2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
    2000-2003 E52 BMW Z8 Roadster
    2002-6/2006 R50 MINI MINI Cooper
    2005-6/2006 R52 MINI MINI Cooper Convertible, MINI Cooper S Convertible.
    2002-6/2006 R53 MINI MINI Cooper S
    Turner Motorsport
    Part #: TMS16545
    Price: $6.25 (USD) 
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Turner Motorsport Blipshift Z4 Racecar T-Shirt - Black Your 328i may not yet be a full blown GT racecar, but adding that short shift kit gets you one step closer. Monday morning's 5 minute long red light is a chance to daydream of the 180mph high banks of Daytona! Every mod is a life enhancement with daily rewards.

    Introducing the winner of the Racing Bimmers Tee Design Contest by Blipshift honoring Turner Motorsport's continued success with BMW racecars! From e30s to last season's monster Z4, Turner has stayed true to BMWs since 1993, amassing 7 championships.

    Congrats to Anthony, winner of the Pit Crew Experience with the Turner team this season at Mazda Raceway Laguna Seca!

    Only available at TurnerMotorsport.com. Choose from Fitted T-shirt or Beefy T
    Turner Motorsport
    Part #: BS-Z4-FITTED
    Price: $12.00 (USD) 
    $19.95 (Sale - Save 40%)
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    E36 X-Brace Reinforcement As Used on Project E36 M3
    Original BMW chassis reinforcement developed for the special M3 LTW (Lightweight) model. This tubular-steel part connects the front subframe to the body and gives the car a more solid feel with less flex. Every convertible and Roadster model uses a similar design to address inherent chassis flex in the front of the car. Fits all E36 and Z3 chassis BMWs.

    By adding this Genuine BMW Motorsport cross brace, you'll dramatically reduce that flex and movement in the front half of the body on your E36. This is a must-have on any BMW E36 that has an upgraded suspension, larger sway bars, is driven aggressively or sees ANY amount of track time. The Xbrace is a factory BMW Motorsport part, so design and fit are both great and the installation is straight forward and easy. Perhaps best of all is the low price compared to the impact the Motorsport X-brace has on the E36 chassis. If your car is a 1992-1996 model, be sure to select the option below so we include the proper hardware (nutserts) to use during installation (1997-1999 cars don't require them.)

    The E36 Motorsport X Brace / Cross Brace fits:
    1992-1995 E36 325i, 325is, 325ic
    1996-1998 E36 328i, 328is, 328ic
    1997-1999 E36 323is, 323ic
    1992-1999 E36 318i, 318is, 318ic, 318ti
    1995-1995 E36 M3 3.0 liter
    1996-1999 E36 M3 3.2 liter
    1996-2002 Z3 Roadster & Coupe (all)
    Genuine BMW
    Part #: E36X
    Price: $183.85 (USD) 
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Turner Motorsport Power Pulley Kit - E36 325/M3, E34 525i (M50), MZ3 (S52)

    Underdrive Power Pulleys work to 'free up' horsepower. Any accessory that spins from the main drive belt is using up power. That's power that could otherwise be used to move the car. By giving some of that power back to the engine, you can make the car faster! It's like FREE HORSEPOWER! We measured 10.7 whp at 6960 rpm and 8.1 lb-ft of torque at 5550 on a 1995 M3.

    Underdrive pulleys for your BMW will slow down engine-mounted accessories - the water pump, power steering pump, and alternator*. These systems contribute to 'parasitic losses' - power lost from what the engine could produce if it did not have these systems. Since less energy is used to move them, that power is transferred back to the engine and used to propel the car. Our pulleys give a 10-20% reduction in rotation, releasing up to 11hp on most BMW six-cylinder engines. There's also a small but noticeable improvement in throttle response too! We have done extensive testing and development work, both on and off the track, to ensure that the accessory systems function as they should. On our Racing pulley kits we actually underdrive certain components more so we feel our Street pulleys are an ideal compromise between power/torque gains, reliability, and system performance. Our pulley kits have been on the market for over ten years, and used in all of our own cars, with zero component failures related to their use.

    Our pulleys are made from T-6061 aluminum and finished in a durable black hard anodize that is very resistant to wear, chemical exposure, and heat. We designed our pulleys to look similar to the factory parts but also to be stronger and, in most cases, slightly lighter too. For example, a Turner alternator pulley is less than half the weight of the stock steel pulley! With our hardcoat aluminum you will never have to worry about a serious failure of a stock plastic pulley. A 'stealth' approach to aesthetics was our goal and we let the results speak for the pulley design. Installation is straight forward and easy with simple hand tools. Removal of the fan is required for access to the front of the engine. Total install time for a 3-piece pulley set should be around 1.5 hours. A new longer belt is included and we also recommend replacing the separate A/C belt, belt tensioners, and the guide and deflection pulleys at the same time.

    Alternator Pulley Options
    (click to expand)
    Bosch or Valeo? BMW built your car with either a Bosch or Valeo brand alternator. Unfortunately, the pulley is not the same for both brands. The brand is usually printed on the black plastic cover of the alternator but may be facing the frame rail or the ground. If you know which brand you have, select your option below and we'll send you the correct alternator pulley for your BMW. Don't know which you have? NO PROBLEM! We can send you both. The 2nd pulley costs $40 but you will receive a refund once we get the un-used pulley back (return shipping not included).
    Aftermarket Stereo Systems
    (click to expand)
    We offer our kits in two different ways: the full Power Pulley Kit with all 3 pulleys or a 2 pulley kit if you do not wish to underdrive your alternator (for large stereo systems or other battery-draining modifications). Our kits have been tested for compatability with the factory premium stereo systems (Harmon Kardon, etc). But any major alterations or upgrades from the factory system will work best with our 2 pulley kit and no underdriving of the alternator. For all stock stereo systems the 3 pulley set is recommended because the Turner alternator pulley will help make more power and is also much lighter than the stock pulley.


    Additional Info
    Clickhere for example dyno graph

    Click here for installation instructions.


    This underdrive pulley kit fits the following BMW:
    1991-1995 E34 5 Series 525i without servotronic steering and without self-leveling
    1992-1995 E36 3 Series 325i, 325is, 325ic
    1995-1995 E36 M3 3.0 liter (S50) **US models only, coupe
    1996-1999 E36 M3 3.2 liter (S52) **US models only, coupe, sedan, convertible
    1997-2000 MZ3 Z3 M Roadster & Z3 M Coupe (US models, S52US)
    Turner Motorsport
    Part #: PPK-E36
    Price: $242.95 (USD) 
    In Stock
    Free Shipping Free Shipping
    E36 M3 US Supersprint Performance Muffler

    Supersprint makes one of the nicest, highest quality performance exhausts for the E36 M3 that we have seen. This exhaust functions more like a stock replacement sport exhaust than an aftermarket performance system. The sound is sporty and throaty but without attendant drama and over-powering sound. We like to say that it's a more mature sound than some other aftermarket exhaust which makes it perfect when included on an E36 M3 restoration or classic European tune. This Supersprint is all stainless steel and bolts on to the stock US catalytic converter section with the stock hangers and gaskets.

    Supersprint exhaust is widely recognized as the leader in complete exhaust system upgrades - extremely high quality, well designed for optimal flow, and amazing sound. Even at a premium price Supersprint is an unbeatable exhaust system because every aspect is done to such a high level. A Supersprint exhaust rewards you with a terrific sound, long lasting construction and excellent fitment. The Supersprint sound is very 'European' which fits the sporting sophistication of BMWs perfectly. Most systems are also modular - sections can be added or removed to custom tailor the exhaust sound to your preferance. Aside from 'Race' systems, their mufflers meet European noise laws so you get a refined and tuned sound without being excessively loud. Most Supersprint systems are built with larger diameter piping to improve exhaust flow which helps the engine do less work and make more horsepower! Supersprint exhausts generally run at a premium over other systems but no other system on the market can match their quality, performance, or reputation!
     

    section:cat-back rear muffler

    connects to:stock cat section or aftermarket center section

    tip style:76mm dual round

    material:T304 stainless steel


    This item fits the following BMWs:
    1995-1999 E36 BMW M3
    also fits 1992-1999 E36 BMW 325i 325is 325ic 328i 328is 328ic as an upgrade

    Supersprint
    Part #: 784426
    Price: $970.25 (USD) 
    $1293.67 (Sale - Save 25%)
    Ships on Jan 11, 2018
    Free Shipping Free Shipping
    Quantity:   
    E36 Euro Oil Filter Housing This is a stock Euro E36 M3 oil filter housing, as used on all European spec M3s (with 282hp 3.0 liter or 321hp 3.2 liter). The Euro housing has ports on it for running the Euro oil cooler. It also has an internal oil thermostat that will divert oil back through the block to warm it faster when the engine is cold. This housing is commonly used in the US with the Euro oil cooler when properly modified. The port for the VAN0S needs to be drilled and tapped to match the US VAN0S line and banjo bolt (M14x1.5). We can modify the housing for you (select this option from the list) or you can have it done locally (DIY modification is not recommended). The Euro housing uses the same filter as the other US models.

    This is an Original BMW part with these other BMW part numbers - 11427833240 and 11427839858.

    This item fits the following BMWs:
    1992-1999 E36 BMW 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
    1991-1995 E34 BMW 525i
    1997-1998 E39 BMW 528i
    1997-1998 Z3 BMW Z3 2.8
    1998-2000 Z3 BMW Z3 M Roadster M Coupe
    Genuine BMW
    Part #: 11427839858
    Price: $495.95 (USD) 
    Ships on Jan 30, 2018
    Free Shipping Free Shipping
    Complete Front Control Arm Upgrade With Solid Rubber Bushings - E36, Z3 - Meyle HD One common weak point in the E36 3-series model range is in the mounting and ball joints of the suspension. The front suspension ball joints in particular are prone to wearing out quite quickly thanks to a soft material in the ball joint itself, leaving you in a potentially dangerous situation. At best, worn ball joints and bushings will give you poor steering feedback and clunking noises. However, loose or worn ball joints will have excessive play which will drastically reduce the effectiveness of the steering and suspension. In extreme cases, the ball joint has been known to pop free of the control arm, resulting in total steering loss.

    Meyle has addressed this problem with a higher-grade metal in their HD ball joints, similar to those used on the E36 M3. The metal will not wear or fatigue nearly as fast as the standard ball joints. The lifespan is greatly extended. A side benefit of the stiffer joint is better steering response. The metal will not flex or deflect like plastic, rubber, or any other material. The lack of play will mean sharper steering, restoring much of the car's precision and fun-to-drive character. Meyle is a German brand in business since 1958 and all of their products are TUV approved and meet or exceed ISO standards.

    We supply the Meyle HD control arms as a set with new M3 rubber control arm bushings. You can choose bushings with either a centered hole (same as stock original) or with an offset hole (adds caster and camber). The stock rubber bushings (manufactured by Boge) will be perfect for most people but if you're looking for an upgrade, the offset bushings will give the car quicker steering response. The solid rubber mounts last longer and give better feedback than the original web design.

    All Meyle HD parts come with a 4-year, unlimited mileage warranty.

    Package Options:
    Bushings without control arm brackets.
    Bushings pre-installed into new control arm brackets

    Applications:
    1992-1999 E36 318i, 318is, 323i, 323is, 325i, 325is, 328i, 328is, including all sedan, coupe, and convertible models.
    1995-1999 E36 318ti Compact and hatchback models
    1996-2001 Z3 1.9, 2.3, 2.5, 2.8, 3.0
    Meyle HD
    Part #: E36HDARMS
    Price: $513.80 (USD) 
    In Stock
    Free Shipping Free Shipping
    E36 Bilstein HD Monotube Shocks - E36 318i/323i/325i/328i (set of 4) 6/92-98; for stock springs; Set = 2 front + 2 rear. Includes top nuts and rear lower shock washer. The stock rear dust boots are re-used. The Bilstein Heavy Duty (HD) Shock is designed for use with stock springs. These shocks provide improved handling and stability without sacrificing ride comfort.

    Optional Items:(select below)
    Spring Pads - Now is the perfect time to replace worn or damaged spring pads. Kit includes all 8 spring pads.
    Rear Shock Mounts- choose from our "Repair Shop" mounts with a lifetime guarantee or our aluminum/urethane mounts which are great for street or track use.

    This item fits the following BMWs:
    6/1992-1998 E36 BMW 318i 318is 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic


    Click here for important installation information.

    Bilstein
    Part #: TMS338687
    Price: $637.30 (USD) 
    Ships in 2 Days
    Free Shipping Free Shipping
    Genuine BMW E36, Z3 Strut Tower Reinforcement Plates (Pair) The shock towers on the E36 and Z3 are notoriously weak. Under normal driving conditions with a stock, fresh suspension it is unlikely that you will ever have a problem. But with an upgraded street or race suspension with firm springs much of the energy from pounding the road is transmitted to the thin sheet metal in the strut tower. This pounding will cause the tower to deform or even crack. Look for 'mushrooming' or deformity around the holes for the three mounting studs at the top of the strut tower. The sheetmetal around the holes should really be flat and square. Poor shocks or stiff suspensions will actually cause this sheetmetal to pop up.

    These factory BMW reinforcement plates will help disperse the energy and save you from costly repairs in the future. A strut brace also helps to prevent this but these plates are designed to reinforce the strut tower from the bottom. The install over your strut mount or camber plate and simply add thickness (strength) to the strut tower. They can be sandwiched in place and do not require welding. BMW part number 31312489795

    This item fits the following BMWs:
    1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
    1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe. Note: some Z3 models already come from the factory with these plates.
    Genuine BMW
    Part #: 31312489795K
    Price: $39.52 (USD) 
    $41.22 (Sale - Save 2%)
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    E36 3-series Complete Turner Motorsport Reinforcement Package

    Let's face it, the E36 is an old chassis but it's still the most popular car to build for track-use. But because of it's age, certain parts of the chassis are prone to structural failure. We've been racing the E36 for over ten years so we know what the weak points are and how to make them stronger. Included with this package are the reinforcement kits that are absolutely necessary for a car that sees any time on the track. Street cars will also benefit from these pieces as your car can take almost as much of beating on the road as on the racetrack.Buy as a package and save 10%! Package includes reinforcements for the following areas:

    This item fits the following BMWs:
    1992-1998 E36 BMW 318i 318is 323is 325i 325is 328i 328is - Not M3

    Turner Motorsport
    Part #: T36REINF
    Price: $240.20 (USD) 
    In Stock
    Free Shipping Free Shipping
    E36 325i, E34 525i Turner Motorsport Peformance Chip (2.5L with M3 Cams) If you've installed M3 cams in your 325i but have not gotten this Performance Chip then you're missing out on half of the horsepower. This Performance Chip is tuned to take full advantage of using these cams on the 325i. You can expect huge gains in the top end of the RPM band but thanks to this chip's dyno tuning there is no loss of low-mid range torque. You get seamless power delivery fromlow RPM all the way up to the 7000 RPM rev limit. Jim Conforti achieved this by altering the fuel and spark maps along with the cam timing to take full advantage of premium 91+ octane fuel. The rev limit is raised and the top speed limiter is removed.

    Turner Performance Chips provide the ultimate in performance advantage! Adding a performance chip to your BMW is the easiest and most cost effective way of increasing BMW power, torque, and performance with NO DOWNSIDES. Through years of BMW performance tuning, we are able to maximize power and torque gains for 91 octane fuel used in North America. By making changes in the ignition and fuel maps of the DME we are able to optimize performance with no side effects or compromises. Other changes will make your BMW smoother and more responsive than when it left the factory. Our chips have a lifetime warranty and a 30-day satisfaction guarantee. If for any reason you are not fully satisfied with the increase in power and overall drivability you can return the chip to Turner Motorsport for a full refund. Chips are supplied with detailed instructions and are user-installed in about an hour. See below for specific information that we may need from your BMW model.

    Required Vehicle Info
    E36 325i/is/ic 93-94
    E34 525i 93-94
    No additional info required.
    E36 325i/is/ic 95
    E34 525i 95
    Production date (MM/YY)

    This performance chip fits the following BMWs:
    1993-1995 E36 BMW 325i 325is 325ic
    1993-1995 E34 BMW 525i
    Turner Conforti Performance Chips
    Part #: 413-252
    Price: $349.00 (USD) 
    Ships in 2 Days
    Free Shipping Free Shipping
    E36 M3 95 Stage 2 Turner Motorsport Performance Package

    E36 M3 OBD-I Stage 2 Performance Package
    Peak Power Gain: +35hp / +24ft-lbs
    Rev limit: 7000
    Octane: 91 or higher

    A fantastic upgrade package for the 1995-1999 E36 M3 3.0 or 3.2 with OBD-I! This special package combines some of our most popular upgrades for a lot of horsepower and less money!!! It's a great bolt-on first step for big power gains without having to go into the engine for cams or head work. We use an aFe Euro Intake Kit, Bosch Euro HFM, Bosch "24lb" fuel injectors, and a special Conforti-TMS Performance Chip. Expect a whopping 35hp from this package on a stock M3. With the undersized stock air sensor, the M3 is gasping for breath. But with the larger 3.5 Euro HFM and Euro Intake, the M3's engine can breathe a lot better. This kit works on all OBD1 equipped M3s, including the S52 3.2-liter version. Note for 3.2 you must be converted to OBD-1 electronics for this package to work.

    *Please not injectors are rebuilt to our specification* 


    Applications:
    1995 E36 M3 3.0 (manual transmission only)
    1996-99 E36 M3 3.2 (manual transmission only) only for cars with OBD1 conversion
    any S50 or S52 with OBD-1 in an E36 (330i, 332i, 332ti, etc)

     

    Packaged by Turner
    Part #: E36EURO24
    Price: $1144.91 (USD) 
    $1149.9 (Sale - Save 0%)
    Direct Ship
    Free Shipping Free Shipping
    Schwaben Extended 19mm Wheel Stud Socket Adapter

    Installed extended wheel studs and would love to be able to change wheel spacers as needed? But wait, if you have a flat tire or want to change it up at the track. But now your lug wrench is not deep enough to reach the nuts.

    Features:

    • This specially made socket features 19mm male hex on one end and 19mm socket on the other
    • Works to extend reach between wrench and lug nut
    • Keep inside your glove box so it is ready for any tire change on the road or on the track

    NOTE: Not for use with impact.

    Schwaben
    Part #: 004351SCH02A
    Price: $11.21 (USD) 
    $14.95 (Sale - Save 25%)
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    E36 Fluidyne/Turner 44mm Aluminum Radiator Upgrade RE-DESIGNED AND RE-ENGINEERED!!

    We have collaborated with FLUIDYNE on improving their already excellent aluminum radiator for the E36. The features that made FLUIDYNE a leader in the E36 radiator market continue but with some new elements requested by the Turner Motorsport R&D staff. We have made the radiator easier to fit with the stock fan shroud and hanger mounts. The shroud will be better secured to the radiator than before which saves time and hassle. Our goal was to make this as close to a "drop-in" replacement as possible. We also had new hangers installed on the bottom to accommodate the factory E36 Euro oil cooler and our oil cooler hangers. A zinc anode drain plug absorbs static electricity from the coolant which helps prolong the life of temp sensors. There has never been a better E36 radiator upgrade than this! For an E36 track or modded street car there should be no reason to ever go back to a stock plastic radiator or compromise on a cheap aluminum radiator. The latest FLUIDYNE is the best there is.

    The stock radiator has an aluminum core but with plastic end-tanks and hose connections that become brittle and can leak or crack. You may not even realize your radiator neck is cracked until it's too late and you're stranded on the side of the freeway or unable to continue with your track day. An all-aluminum design does not suffer the defects of similar plastic construction. FLUIDYNE quality is what sets them apart from every other manufacturer. Their radiators feature a high-tech CAB-brazed core construction instead of epoxy (which can leak). All tanks and brackets are TIG welded by hand in the USA. If you plan on owning your BMW for many years to come, or are using it in a situation where failure is NOT an option such as track or racing, then this should be your only option instead of the failure-prone stock radiators.

    This radiator fits the following BMWs:
    1995-1999 E36 M3 including coupe, sedan & convertible
    1992-1995 E36 325i & 325is sedan/coupe/convt
    1996-1998 E36 328i, 328is & 323is coupe/sedan/convt
    1999-1999 E36 328is & 323is
    Turner Motorsport
    Part #: FHP13-92E36
    Price: $599.95 (USD) 
    In Stock
    Quantity:   
    E46 M3 Transmission Mount Upgrade for E36/E46 The transmission mounts from the E46 M3 are a direct fit to the other E46 and E36 models. Thanks to the higher engine output of the E46 M3 this makes the transmission mount a good street upgrade. These mounts are a little stiffer than the stock E36/E46 transmission mount so the tranny will resist twisting better. The twisting motions can affect the shifter linkage and make shifting more difficult and not as precise. A mis-shift in an E36 or E46 can lead to a very expensive engine rebuild!

    Sold as a pair.

    This transmission mount fits the following BMWs:

    1992-1999 E36 3 Series including 325i, 325is, 328i, 328is & 323is (5 speed manual)
    1995-1999 E36 M3 (manual transmission)
    1999-2005 E46 3 Series including 323i, 323Ci, 328i, 328Ci, 325i, 325Ci, 330i, 330Ci
    2001-2006 E46 M3 including coupe & convertible
    Turner Motorsport
    Part #: 22322282340x2
    Price: $49.90 (USD) 
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben 8oz Ball Peen Hammer The 8oz Ball Peen hammers are constructed with a fiberglass handles with a molded rubber grip. The heads are made from drop forged steel to avoid damage and to stand up to long years of impacts. Each side is precision ground for accurate striking points.
    Schwaben
    Part #: 016805SCH02A
    Price: $7.46 (USD) 
    $9.95 (Sale - Save 25%)
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben 3pc Professional Hammer Set

    Every now and then you just need a hammer to get the job done. Ensure that your hammers are high enough quality to stand up to the demands of the job!

    Included in this set:

    • 8-oz Ball Peen Hammer 
    • 16-oz Ball Peen Hammer 
    • 36-oz Dead Blow Hammer

    The 8 and 16 oz Ball Peen hammers are constructed with a fiberglass handles with a molded rubber grip. The heads are made from drop forged steel to avoid damage and to stand up to long years of impacts. Each side is precision ground for accurate striking points.

    The 36 oz dead blow hammer is built with steel shot internals that delivers a stronger force of impact and prevents rebound. The hammer itself is all built from a high-impact poly jacket that encases the head and handle. This hammer allows you to hammer softer metals, such as aluminum, without damaging the surface or the part itself. The handle has a diamond-shaped grip pattern to prevent your hands from slipping and sliding, even with your hands are covered with oil.

    Schwaben
    Part #: 016805sch01aKT
    Price: $22.46 (USD) 
    $29.95 (Sale - Save 25%)
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Turner Motorsport Brake Bleeder Bottle with Check Valve - Simple Bleed This is the new evolution of our popular Brake Bleeder Bottle. The latest design features a one-way check valve inside the bottle that is operated when you pump the brakes. This is a more economical and simpler system than other "1 man bleeding" kits - no modification to your brake system and you only have to buy the one bottle. The newest bottles also include upgraded caps and fittings for a tighter seal.

    The one-way check valve is extremely simple to use - attach the bottle and hose, open your bleed screw, and pump your brakes from the pedal. The check valve opens with each pump to let fluid and air out of the system and then seals tight when the pedal is released. The bottle uses a large magnet to conveniently stick to your brake disc while you run the hose to the caliper.

    Works on just about all brake systems so no need to have specialized adapters or bleed screws.
    Turner Motorsport
    Part #: BBMCV
    Price: $21.95 (USD) 
    Ships on Dec 22, 2017
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Tool - 27mm 1/2 Drive 6-point Socket 27mm hex socket with 1/2" drive.
    Turner Motorsport
    Part #: TMI9910M27
    Price: $27.00 (USD) 
    Ships in 3 Days
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
     Turner Front Carbon Fiber Strut Brace - E36 323i/is 325i/is, 328i/is, M3 Improve the handling and steering response of your BMW today with a Turner Motorsport carbon fiber front strut brace.

    Turner Motorsport developed these in association with our European partners to provide a higher quality and better performing strut brace than our competitors. Made of carbon fiber with aluminum mounts these strut braces - also know as a "stressbar" - help to minimize chassis flex during the hardest cornering, which keeps your tires squarely on the road and delivers the traction you need when you need it most. Shock absorption is also increased, which reduces road forces and body roll and lends a firmer road-feel. Strut braces provide benefits for both street driven and track driven BMW's.

    This item fits the following BMWs:
    1992-1998 E36 BMW 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
    Turner Motorsport
    Part #: 067007SC
    Price: $399.95 (USD) 
    Ships on Feb 6, 2018
    Free Shipping Free Shipping
    Quantity:   
    E36 M3 Clutch & Flywheel Upgrade Package for E36 328i/is This kit uses the stock E36 M3 clutch with a JB Racing aluminum flywheel for an outstanding improvement in the non-M E36 328i/is. The stock M3 clutch is larger than the E36 328i disc and was used in the 321hp Euro M3 – way more clutch than you need on a 2.8-liter M52 (even supercharged cars). But because it’s a factory clutch the feel, durability, engagement, fitment, etc are OE spec! This package is in one of our own E36 328’s and has performed perfectly in over 60,000 miles of use.

  • OEM replacement clutch parts
  • lightweight aluminum flywheel for faster acceleration and quicker revs (15lbs less than stock)
  • comparable cost to OEM replacement parts
  • direct fit with no installation issues

    If you own an E36 but have never done a clutch job, you’re in for an unpleasant surprise! The stock flywheels don’t usually last much longer than 100,000 miles. You might be able to have it machined but only if you’re lucky. The best route is to have a new flywheel on hand when installing the clutch. This package is actually about the same price as buying a new OEM clutch and new OEM flywheel! And there’s a big performance boost!
      Included with this Clutch / Flywheel package:
    • E36 M3 3.2 Sachs OEM clutch kit - clutch disc, pressure plate, throw-out bearing
    • E36 M3 JB Racing aluminum flywheel
    • new pilot bearing
    • UUC Clutch Stop
    What about noise? This package was installed in Drew’s 1994 325is 60,000 miles ago. “I expected a trade-off when putting the aluminum flywheel on but the rattle is way less than what I was scared into believing. The rattle is not there all the time. And when I do hear it, I know what it is and immediately dismiss it. I’ve never had a bystander tell me to get my car checked out. And I’ve never had a passenger comment on it – they just ask why I’m revving the car so high… Without a doubt this will be a repeat mod on a future car. I’m using the regular Red Line MTL oil too.”

    This Clutch & Flywheel Package Fits:
    E36 328i, 328is, 328iC - 1996,1997,1998
    E36 M3 - 1995, 1996, 1997, 1998, 1999. Makes a great overhaul package!
  • Turner Motorsport
    Part #: TMS187021
    Price: $861.85 (USD) 
    In Stock
    Free Shipping Free Shipping
    Quantity:   
    Turner Motorsport
    Part #: TEN3680FRC
    Price: $119.95 (USD) 
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Steering Rack Alignment Tool - E36 & MZ3 This tool was developed by the TMS race crew for multiple fixes to overlooked problems in the steering rack and alignment, such as centering the steering rack, centering the steering wheel, and attaining repeatable alignments. Using this tool results in significant time savings and repeatable alignment settings when doing street or track suspension setups.

    During typical alignment work the adjustments are made from the tie rods without first centering the rack (having even lengths of the rack exposed). If the rack is off-center when the tie rods are adjusted your steering will not have the correct number of turns and unequal turning radius left to right. A centered steering rack also prevents handling issues such as uneven bump steer and inconsistent steering resistance. This makes for more work for the technician but ensures your steering is consistent.

    With this tool, every alignment will have the rack in the same place every time, which can save time when doing a quick check of toe after a hard day at the track or on the street. If your steering rack is in the same place for every alignment then the steering wheel will also be in the same place, hence eliminating the need to reset the steering wheel. Every time a toe adjustment is done and the tie rod is moved without the alignment tool, it moves the steering rack, resulting in having to recheck all alignment numbers after each adjustment, resulting in having to set up the alignment equipment after every adjustment. If you have ever used strings to set up your car you know how much having to restring the car can slow you down. If you are like us at TMS, you want your E36/Z3 perfect every time and you want to achieve perfection as quickly as possible.

    E36 Rack Alignment Tool Application Chart:
    • E36, MZ3 with TMS Rack Stop Kit TSU3690001 (Rack Stops not included)
    • E36, MZ3 with M Tie rod locking plates. (Tie Rod Locks not included)

    This steering rack alignment tool fits the following BMWs:
    1992-1999 E36 3 Series - 318i, 318is, 325i, 325is, 328i, 328is, 323is
    1995-1999 E36 M3 including M3 3.0 and M3 3.2 liter
    1998-2002 MZ3 Roadster/Coupe including M Roadster & M Coupe (no non-M Z3)

    Click here for installation instructions
    Turner Motorsport
    Part #: TMI9910001
    Price: $49.95 (USD) 
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Turner Motorsport Front Hub Extenders (Pair)

    Hub Extenders are the solution that no one else has! BMW wheels must fit on a hubcentric lip to be securely (and safely) mounted to the hub. But with a 3, 5, 8, or some 10mm spacers on a lip measuring no more than 11mm that presented a huge problem - there would be no lip left over for the wheel to rest on! As one of the world's leading BMW tuners and race teams, we came up with a way to extend the lip and get back the lost surface area for the wheel to safely mount on. Our Hub Extenders are the first of their kind.

    Hub Extenders fit where the stock dust cap is usually fitted on the front wheel hub. Pop out the dust cap and tap the Hub Extender into its place. It becomes an extension of the original lip. These will only work on the front hubs of the cars listed below because the rear hub is tapered inside (narrows down). These will not work with Xi AWD models because the front axle shaft protrudes through the hub. With Hub Extenders in place you can use nearly any flat wheel spacer - 3mm, 5mm, 7.5mm, 10mm, or possibly more without worrying that the wheel will not be securely seated. This is perfect for wheels that have chamfers on the back of the wheel that don't match up to existing spacers (Kosei K1 spacers for example).

     

    Turner Hub Extender Features --

    + hub extension makes flat spacers a true hubcentric fitment
    + precise tolerance fitment thanks to CAD process and CNC mill machine
    + aerospace grade aluminum  light weight but very strong with a high resistance to corrosion
    + additional military-spec hardcoat for further corrosion resistance
    + stealthy black color with laser engrave Turner logo
    + Turner Motorsport track and street tested!
    + Made in the USA

    Wheel Limitations. Special consideration needs to be taken since wheel design and manufacture differ from brand to brand. The key dimension is the dept of the center bore. Some wheels won't work with larger spacers and a Hub Extender because of the additional protrusion into the center bore. Please measure your wheel to make sure it can accommodate an extra 2.5-5mm of hub extending into the center bore. Click here for a diagram.

    Hub Limitations. BMW has multiple hub designs but not all are compatible with our Hub Extenders. The inside lip of the hub must be flat and smooth for at least 13mm (the depth our Extender fits into the hub). Some BMW hubs have a bowl shape or have tapered inside walls which will prevent the Hub Extender from seating all the way. Remove the hub dust cap to check before opening your Turner Hub Extenders.

    This item fits the following BMWs:
    2014+ F22 F23 BMW 228i M235i
    1988-1991 E30 BMW M3
    1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
    1999-2005 E46 BMW 323i 323ci 325i 325ci 328i 328ci 330i 330ci M3
    10/2013+ F30 BMW 320i 328i 335i - Sedan
    10/2013+ F31 BMW 328i - Wagon
    10/2013+ F34 BMW 328i - Gran Turismo
    10/2013+ F32 BMW 428i 435i - Coupe
    10/2013+ F33 BMW 428i 435i - Convertible
    10/2013+ F36 BMW 428i 435i - Gran Coupe
    1982-1988 E28 BMW 524td 528e 533i 535i 535is M5
    1989-1995 E34 BMW 525i 530i 535i 540i M5
    1982-1989 E24 BMW 633csi 635csi M6
    1988-1994 E32 BMW 735i 735il 740i 740il 750il
    1995-2001 E38 BMW 740i 740il 750il
    1990-1999 E31 BMW 840i 840ci 850i 850ci 850csi
    1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
    2003-2008 Z4 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe

    Turner Motorsport
    Part #: TWH9905001
    Price: $59.95 (USD) 
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
     Turner Front Aluminum Strut Brace - E36 318i/is/ic/ti Improve the handling and steering response of your BMW today with a Turner Motorsport strut brace.

    Turner Motorsport developed these in association with our European partners to provide a higher quality and better performing strut brace than our competitors. Made of aircraft grade aluminum these strut braces - also know as a "stressbar" - help to minimize chassis flex during the hardest cornering, which keeps your tires squarely on the road and delivers the traction you need when you need it most. Shock absorption is also increased, which reduces road forces and body roll and lends a firmer road-feel. Strut braces provide benefits for both street driven and track driven BMW's.

    This item fits the following BMWs:
    1992-1998 E36 BMW 318i 318is 318ti 318ic
    Turner Motorsport
    Part #: 067009
    Price: $229.95 (USD) 
    Ships on Feb 6, 2018
    Quantity:   
    Racing Dynamics Front Strut Brace - E36 323i/is 325i/is 328i/is M3 BMWs need some added chassis strengthening in the front. Racing Dynamics has the solution with a stylish polished aluminum strut brace. Easy installation.

    This item fits the following BMWs:
    1992-1995 E36 BMW 325i 325is 325ic - Not for cars with Traction Control
    1992-1998 E36 BMW 323is 323ic 328i 328is 328ic M3
    Racing Dynamics
    Part #: 1969936011
    Price: $206.95 (USD) 
    $229.95 (Sale - Save 10%)
    In Stock
    Free Shipping Free Shipping
    Quantity:   
    Water Pump Pulley Holder for Removal of Fan Clutch Replacing the fan clutch on most BMW models requires holding the water pump pulley while removing the fan clutch lock nut. With less than 1 1/2" clearance on some models this project can easily turn into a mechanical nightmare. Using our special slim line fan clutch wrench in conjunction with the appropriate pulley spanner, the removal and installation required only a few moments.
    Turner Motorsport
    Part #: 143240
    Price: $32.95 (USD) 
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Stealth Bulb Side Marker Bulbs (Set) Stealth Bulb Side Marker Bulbs (Set). Fits most BMW side marker indicators. No more ugly orange egg yolk look in your clear corners. Check your stock bulb and compare to photo before ordering.
    Turner Motorsport
    Part #: TMS450
    Price: $29.95 (USD) 
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Turner Motorsport Custom Tough Case iPhone 4 / 4S The best iPhone case just got a bit better! We've taken the Tough Case iPhone cover and customized it with a photo of the Turner Motorsport #96 E92 M3, running hard at Barber Motorsports Park.

    The Tough iPhone 4 / 4S case uses dual layers of resilient material for a rugged case that protects the object of your affection with a defensive style. The base layer is a form-fitting silicone skin that completely surrounds the iPhone 4 / 4S, adding a layer of cushion that absorbs shocks and impacts.The outer layer is an impact resistant, polycarbonate hard shell fits that fits directly on top of the silicone skin for extra iPhone protection.A solid finish makes the iPhone 4 / 4S case easy-to-hold, while the streamlined design keeps the silhouette slim enough to fit in your pocket.

    Dimensions: 4.62 x 2.39 x 0.45 in (117.2 x 60.6 x 11.3 mm)
    Turner Motorsport
    Part #: 96-IPHONE
    Price: $17.50 (USD) 
    $24.95 (Sale - Save 30%)
    $24.95
    Limited Qty Sale
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    E36 M3 Brake Backing Plates (Pair) E36 M3 brake backing plates (pair) for use with 3 inch brake cooling hose (available separately). These metal backing plates allow you to duct fresh, cool air to the center of the rotor where it needs it most. The addition of these backing plates and appropriate ducting will increase brake pad life by as much as 50%! A cooler braking system will also dramatically reduce brake fade and decrease braking distances. New design! No need to remove wheel bearing to install!

    These brake backing plates fit the following BMWs:
    1994-1999 E36 BMW M3
    Turner Motorsport
    Part #: TMS2502
    Price: $249.95 (USD) 
    Ships in 10 days
    Free Shipping Free Shipping
    Quantity:   
    ECS Tuning Wheel Spacers - 25mm - 72.6mm CB

    Drastically improve the looks of your vehicle while improving your vehicle's handling characteristics and/or easily adjust your wheel fitment to allow for the proper clearance when installing parts such as new wheels, big brake kits, or lowering suspension components.Interference from components such as shocks, springs, or control arms are a common issue when installing wheel that are not a direct OE size replacement. By moving your wheels a few millimeters each, you can give yourself enough clearance for proper wheel fitment and give your car a wider stance in the process.

    ECS Tuning wheel spacers are constructed of high quality 6061-T6 aircraft grade aluminum and are specifically designed by in-house engineers and cnc machined to exact standards, ensuring the best fitment possible. By carefully measuring the OEM wheel hubs and bore dimensions, these spacers mount with minimal clearance to prevent any vibration, retaining the stock-like vibration free operation. 

    ECS Tuning is a performance and genuine parts provider that designs their ECS Tuning branded aftermarket automotive parts in-house to ensure the highest quality and affordability possible. Every part's design is subjected to a rigorous test fit and stress test period to guarantee proper fitment and continued reliability for years to come.

     

    This item fits the following BMWs:

    2008-2012 E82 BMW 128i 135 1M
    1988-1991 E30 BMW M3
    1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
    1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
    2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
    2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
    2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
    2007-2012 E93 BMW 328i 335i M3 - Convertible
    1976-1981 E12 BMW 528i 530i
    1982-1988 E28 BMW 524td 528e 533i 535i 535is M5
    1989-1995 E34 BMW 525i 530i 535i 540i M5
    2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i M5
    1982-1989 E24 BMW 633csi 635csi M6
    2004-2010 E63 BMW 645ci 650i M6
    1981-1987 E23 BMW 733i 735i
    1988-1994 E32 BMW 735i 735il 740i 740il 750il
    1995-2001 E38 BMW 740i 740il 750il
    1990-1999 E31 BMW 840i 840ci 850i 850ci 850csi
    1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
    2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
    2009-2016 Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is

    Rear Only
    2007-2013 E70 BMW X5M
    2007-2014 E71 BMW X6 xDrive35i X6 xDrive50i X6M

    ECS
    Part #: 001058ecs04-25KT
    Price: $109.95 (USD) 
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    12x1.5 Extended Wheel Locks For Wheel Spacers These wheel locks are made in extended lengths to work with wheel spacers. This is the standard conical seat bolt in a 12x1.5 thread pitch (most BMWs up to 2012). This is a set of 4 bolts - one bolt per wheel that replaces one of your existing extended wheel bolts. The 9 point socket provides an extra layer of protection for your coveted wheels. Black zinc coating resists rust and corrosion. Choose the wheel locks to work with your wheel spacers from the list below.
    ECS
    Part #: 003901ECSBM
    Price: $34.95 (USD) 
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Secondary Air Pump Simulator For E36 M52/S52 Engines

    This direct plug-n-play Air Pump simulator allows you to remove the pump with no engine fault codes or check engine light. It does this by electronically simulating the inputs and outputs of the air pump, so that your E36 BMW's DME (engine control unit) does not even realize the pump has been removed. The OBD2 6 cylinder engines came with an auxiliary air pump for emissions purposes and is one of the first things to delete when building a race car. If your E36 for is for track/ racing, has headers or is using forced induction, there are many reasons to eliminate this pump. This unit plugs directly into the factory wiring harness so no need to cut / crimp wires.
     

    This part alters or deletes the emissions equipment on your car. Because of this, we require a waiver of emissions compliance to be signed and sent in to Turner Motorsport. You can download the waiver here.


    This item fits the following BMWs:
    1996-1999 E36 BMW 328i 328is 328ic M3

    Turner Motorsport
    Part #: tms25756KT
    Price: $165.95 (USD) 
    Ships on Dec 20, 2017
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    HARD Motorsport RS Style Door Pull Strap Conversion For E36 M3/Coupe -- RED

    Hard Motorsports offers RS style door latch conversion for your E36 M3/Coupe. These Conversion kits work with all stock internals, requiring no cutting or modification for installation, allowing you to go back to your stock door handle any time. These RS straps are easier to grab than your normal door handle, especially when wearing gloves. Because of their bright color and their 6061 Aluminum construction, they are easy to see and stronger than stock internals, which is very useful in case of an emergency.

    Product Features:

    • Constructed from Machined 6061 Aluminum 
    • Bright color straps easy to see at all times
    • Easier to use than traditional handles with gloves
    • Lifetime warranty on fabric pull-strap

    Fits the following vehicles:

    E36 BMW M3 and All Coupe Submodels

    HARD Motorsport
    Part #: RSPULL.E36_RED
    Price: $139.49 (USD) 
    $154.99 (Sale - Save 10%)
    In Stock
    Free Shipping Free Shipping
    Quantity:   
    HARD Motorsport Oil Sump Baffle BMW E36 & Z3

    Made in the USA from lightweight aluminum and designed specifically for the E46 oil pan, HARD Motorsport's baffles prevent oil from sloshing forward under heavy braking, helping to prevent oil starvation. Any amount of oil starvation can lead to valve ticking and increased engine wear. This is especially helpful for track cars that experience hard cornering and rapid breaking.

     

    Fits the following vehicles:

    E36 BMW Z3 and All Sub-models w/ the M50/M52 engine and US spec S50/S52

    HARD Motorsport
    Part #: OILBAFFLE.E36
    Price: $157.50 (USD) 
    $175.00 (Sale - Save 10%)
    Back Ordered
    Free Shipping Free Shipping
    Quantity:   
    HARD Motorsport E36 M3 Brake Duct Inlets

    These ABS plastic ducts are lightweight and durable and made to fit the E36 M3 front bumper. The rear has a port that allows you to run 3 inch hose to your brakes for extreme cooling needs.

    Sold as a pair. Mounting rivets included.

     

    Fits vehicles with the E36 M-Tech front bumper.

    HARD Motorsport
    Part #: DUCTINLETS.E36
    Price: $67.50 (USD) 
    $75.00 (Sale - Save 10%)
    Direct Ship
    Free Shipping Free Shipping
    Quantity:   
    HARD Motorsport Tow Hook Arrow Sticker

    Most track/race organizations require a sticker pointing out your tow hook. Hard Motorsport offers these to be purchased in addition to their tow hook mounts.

     

    Fits all BMW vehicles.

    HARD Motorsport
    Part #: HARD.TOWSTICKER
    Price: $4.50 (USD) 
    $5.00 (Sale - Save 10%)
    In Stock
    Free Shipping Free Shipping
    Quantity:   
    Complete Turner Baffled Oil Catch Can Kit - Standard Flow 6oz

    When we designed this catch we wanted to have the most function options available, the best separation method, and the easiest to service. The Turner engineered catch cans offer a pre-setup design based ion desired flow direction, however this does not limit you to this flow. The inner baffle orientation can be easily adjusted to flow in both directions in case you decide to move this catch can to a different vehicle. A 4 chamber system  baffle system inside the catch can was engineered to create multiple changes in the direction of airflow within the separator to cause oil droplets to fall out of suspension before exiting the catch can. Having a closed / recirculated design reduces oil ingestion and promotes cleaner emissions and odor-less operation.

    Our catch can was also designed with the idea that the cans fill level can easily be checked with a top mounted dipstick and an optional use bottom drain hole. The drain system comes complete with a valve and hose to be mounted at a lower area of the vehicle so when you're doing an oil change you can drain the catch can.

    Features:

    • 6061-T6 billet machined body, anodized black for lasting protection and appearance
    • Strategically positioned 4 chamber baffle system maximizes oil / air separation 
    • Knurled and black anodized oil dipstick makes inspecting oil volume of reservoir clean and simple
    • Sealed with a pre-installed viton O-Ring
    • Includes 2.5mm allen key to remove baffle plates for cleaning
    • Engineered to create multiple changes in the direction of airflow within the separator to cause oil droplets to fall out of suspension before exiting the catch can
    • Closed / recirculated design reduces oil ingestion and promotes cleaner emissions and odor-less operation
    • Optional use drain hole - drain kit included!
    • Universal mounting kit
    Turner Motorsport
    Part #: 022798tms01-05KT
    Price: $189.95 (USD) 
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Basic Monoball Bearing Service Kit

    The creation of our monoball bearing suspension components was always intended to provide a superior product to the street and track communities. In order to keep this product superior regular service intervals comes highly recommended along with an initial grease packing upon install to ensure these monoballs have the long life we expect. The easiest way to remember this service is to re-grease these bearing at each oil change.

    This kit was assembled to provide the proper grease & grease gun fitting, so you have everything you might need to get these install the right way.

    Contents:

    • Schwaben Snap-in Grease Gun Nozzle Tip For Flush-Style Fitting - 5-1/4" Long
    • CV-2 Grease with Moly - 14oz Tube
    Packaged by Turner
    Part #: 80402KT2
    Price: $31.46 (USD) 
    $34.95 (Sale - Save 10%)
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Screw Cap & Schwaben Removal Tool Kit

    The fuel pump is held into the tank with a retaining lock ring. Most people would take an extension or punch and tap out the ring with a hammer. But that's the wrong way to do it. You could damage the lock ring, or worse, the tank itself. This handy tool is toothed to match the lock ring and takes a standard 1/2 drive ratchet or small extension. Twist the ratchet and the lock ring comes un-done cleanly and smoothly. A hefty tool that pays for itself over and over. Fits most BMWs from 1988-2013. Also has application for MINI and Porsche.

    This metal screw ring tightens down to old the top of the fuel pump or fuel filter assembly dependent on model of vehicle.

    Together they make this job simple and easy and ensure a tight fit with a new ring. 

    Packaged by Turner
    Part #: 16116762417KT1
    Price: $64.21 (USD) 
    $75.54 (Sale - Save 15%)
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Turner Catch Can drain system

    When installing a catch can on your car, having enough space for maintenance can become an issue. This is why we developed a catch can with a bottom drain option, using this kit you can position the drain at the top or bottom of the vehicle for your convenience. Mounting the valve at the bottom of the car allows for you to empty the catch can easily during an oil change without having to move around too much. 

    Contains:

    • 1 - Plastic drain valve
    • 1 - 90 degree barbed fitting
    • 1 - Straight barbed fitting
    • 1 - 3' section of hose
    • 2 - Hose clamps
    Turner Motorsport
    Part #: 022798TMS16KT
    Price: $19.95 (USD) 
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Turner Motorsport Ladies' Tank Top Show your support for Turner Motorsport and your favorite BMW race team and parts supplier with these stylish blue cotton Turner Motorsport tank tops. The tanks feature a yellow logo. Available in three sizes.
    Turner Motorsport
    Part #: TMSTANK
    Price: $19.95 (USD) 
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Rear Shock Mounts (RSM) - Turner Motorsport Race Monoball - E30, E36, E46, Z3, Z4 (Pair) Made in the USA Want the Ultimate design in a rear shock tower mount? You've found it. These rear shock mounts are designed for use on the track and racing. This set of mounts will help your rear shocks perform the best they can in those conditions. The advantage to using a mount with spherical bearing is that it allows the shock to freely move off axis without side loading the shock shaft like rubber or polyurethane mounts do. Side loading a shock increases stiction and wear which decreases its efficiency. Because these are mounts without an isolator (rubber or polyurethane) to dampen road noise and vibrations we do not recommend them for street cars. These were designed in-house and developed for our own track and race cars.

    These TMS bearing mounts include both 10mm and 12mm stainless steel bearing sleeves to work with a wide variety of shock shaft pins. The pin is the upper-most portion of the shock where it passes through the mount. If you need a bearing sleeve size other then 10mm or 12mm please contact us.

    These rear shock tower mounts fit the following BMWs:
    1984-1991 E30 3 series (all) incl. 318i, 318is, 325, 325e, 325es, 325i, 325is
    1992-1998 E36 3 series (all) incl. 318i, 318is, 318ti, 325i, 325is, 328i, 328is, 323is
    1999-2005 E46 3 series (all) incl. 323i, 323Ci, 325i, 325Ci, 328i, 328Ci, 330i, 330Ci
    1988-1991 E30 M3 (all)
    1995-1999 E36 M3 coupe, sedan & convertible
    2001-2006 E46 M3 (all) incl. coupe & convertible
    1996-2002 Z3 Roadster/Coupe including "M"
    2003-2008 Z4 Roadster/Coupe including "M"
    Turner Motorsport
    Part #: TSU9906SM1
    Price: $118.96 (USD) 
    $169.95 (Sale - Save 30%)
    In Stock
    Free Shipping Free Shipping
    Quantity:   
    Specialty Bit Kit - 100 Pieces

    All the right bits in one box. The perfect assortment to keep the job going.

    Features:

    • 10 fractional SAE hex, 9 Torx® tamper-proof, 9 Torx®

    • 9 Metric hex bits, 9 slotted bits, 8 Pozi-drive, 8 Phillips, 4 square-recess, 4 tri-wing

    • 3 spline, 3 Torq, 3 clutch, wing-nut driver, magnetic bit holder and socket bit holder

    • Made of hardened Chrome Vanadium steel for years of dependable use

    • Packaged in a handy blow molded case with individually marked bit slots for easy organization

    Schwaben
    Part #: P-100B
    Price: $16.46 (USD) 
    $21.95 (Sale - Save 25%)
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Carbon Fiber License Plate Frame This is a 100% real carbon fiber license plate frame cover. These 3K twill weave carbon fiber license plate frames fit the standard size US license plate. It's perfect for those automobile enthusiasts with carbon fiber parts on their beloved vehicle or just simply wants to add a performance touch.

    Please note that this license plate frame is made of real carbon fiber and not aluminum/ plastic with carbon fiber look, those prints will fade and discolor over time.

    Package will include 1 real carbon fiber license plate frame that fits onto standard size US license plates, screws are not included for the installation.

    ECS
    Part #: UN-0007
    Price: $39.95 (USD) 
    Ships on Dec 29, 2017
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben 3/8

    Proper torque is very important when it comes to working on engines. The importance comes from proper sealing and to keep from damaging threads.

    Features:

    • Reversible 3/8"-inch drive click-to-stop
    • Torque range of 5 to 80 ft-lb
    • Accurate to within +/-4%
    Schwaben
    Part #: TW-38365
    Price: $27.71 (USD) 
    $36.95 (Sale - Save 25%)
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben 8-In-1 Oil Drain/Fill Plug Wrench

    The tough swivel heads fit an assortment of hexagonal and square recessed drain plugs. A strong magnet on the wrench handle keeps drain plugs handy until they are ready to be reinstalled.

     

    Features:

    • Made of vanadium steel for strength, with chrome plated, corrosion resistant surface.
    • Hex sizes: 10, 12, 14, 17
    • Square head sizes: 8, 10, 3/8” and ½”
    Schwaben
    Part #: W-136PNM
    Price: $14.96 (USD) 
    $19.95 (Sale - Save 25%)
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Liqui Moly Anti-Seize Compound

    Nothing is worse than a seized bolt. You run the risk of rounding off the head or even snapping the bolt all together. This could lead to costly repairs to replace the parts affected or to have the damaged bolt removed. Avoid the head-ache and use this simple anti-seize compound from Liqui-Moly to ensure easy removal of bolts and studs in the future. This specific copper based anti-seize is perfect for high-temp applications such as exhaust bolts and engine components.

    Liqui-Moly is a German chemical company that offers top of the line engine oils, additives, and car care products that are designed to extend the life of your engine and ensure the best lubrication and cleanliness off engine and transmission components possible. With more than 50 years of experience and reviews across the world from magazines and race teams, Liqui-Moly proves time and time again why they are one of the most innovative lead forces of performance automotive chemicals in the world.

    Liqui-Moly
    Part #: LM2012
    Price: $8.06 (USD) 
    $8.95 (Sale - Save 10%)
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    ECS Tuning Wheel Spacers - 17.5mm - 72.6mm CB

    Drastically improve the looks of your vehicle while improving your vehicle's handling characteristics and/or easily adjust your wheel fitment to allow for the proper clearance when installing parts such as new wheels, big brake kits, or lowering suspension components.Interference from components such as shocks, springs, or control arms are a common issue when installing wheel that are not a direct OE size replacement. By moving your wheels a few millimeters each, you can give yourself enough clearance for proper wheel fitment and give your car a wider stance in the process.

    ECS Tuning wheel spacers are constructed of high quality 6061-T6 aircraft grade aluminum and are specifically designed by in-house engineers and cnc machined to exact standards, ensuring the best fitment possible. By carefully measuring the OEM wheel hubs and bore dimensions, these spacers mount with minimal clearance to prevent any vibration, retaining the stock-like vibration free operation. 

    ECS Tuning is a performance and genuine parts provider that designs their ECS Tuning branded aftermarket automotive parts in-house to ensure the highest quality and affordability possible. Every part's design is subjected to a rigorous test fit and stress test period to guarantee proper fitment and continued reliability for years to come.

     

    This item fits the following BMWs:

    2008-2012 E82 BMW 128i 135 1M
    1988-1991 E30 BMW M3
    1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
    1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
    2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
    2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
    2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
    2007-2012 E93 BMW 328i 335i M3 - Convertible
    1976-1981 E12 BMW 528i 530i
    1982-1988 E28 BMW 524td 528e 533i 535i 535is M5
    1989-1995 E34 BMW 525i 530i 535i 540i M5
    2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i M5
    1982-1989 E24 BMW 633csi 635csi M6
    2004-2010 E63 BMW 645ci 650i M6
    1981-1987 E23 BMW 733i 735i
    1988-1994 E32 BMW 735i 735il 740i 740il 750il
    1995-2001 E38 BMW 740i 740il 750il
    1990-1999 E31 BMW 840i 840ci 850i 850ci 850csi
    1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
    2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
    2009-2016 Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is

    Rear Only
    2007-2013 E70 BMW X5M
    2007-2014 E71 BMW X6 xDrive35i X6 xDrive50i X6M

    ECS
    Part #: ECS#256KT
    Price: $89.95 (USD) 
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    5MM Silicone Vacuum Hose - Red - 9 Feet Car suffering from vacuum leaks? This vacuum hose has a 5mm inner diameter. 
    Forge
    Part #: vc05r
    Price: $12.56 (USD) 
    $13.95 (Sale - Save 10%)
    In Stock
    Quantity:   
    Schwaben Pry Bar / Seal Puller Kit - 3 Pieces

    Having an adjustable pry bar really comes in handy when working in tight spaces as well as making seal replacement much easier.

    Features:

    • Three hardened alloy metal bars in 10, 12, and 15 inch lengths, with knurled, non-slip handle grips.
    • Push button release at pry bar pivot allows the pry head to rotate through a wide arc and lock in place again when the button is released.
    • Packaged in a handy molded case for portability and easy organization.

     

    Schwaben
    Part #: PB-3PCS
    Price: $37.46 (USD) 
    $49.95 (Sale - Save 25%)
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben Digital Tire Pressure Gauge

    The digital tire pressure gauge can help you check and correct tire pressures on a regular basis to prevent these problems. Lightweight gauge with a digital display that can measure pressures from 0-150 psi; accurate to 0.10 psi. Display pressure in psi, bar, kg/cm, and kPa.

    Correct tire inflation reduces tire wear and improves vehicle handling and fuel economy. Under inflated tires run hot, wear faster, and reduce fuel economy. They can also illuminate the Tire Pressure Monitoring System (TPMS) warning light on vehicles equipped with the system.

    The gauge has an angled head with a clear digital display and a battery saver features that shuts off the gauge automatically, when not in use. Batteries are included.

    Schwaben
    Part #: PJD3238L-2
    Price: $8.21 (USD) 
    $10.95 (Sale - Save 25%)
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Liqui Moly Long Life Grease with MoS2 - 100 grams

    Made specifically for long periods of lubrication for extremely high bearing pressures and high pressure surface contact, this grease with the added MoS2 Anti-Friction modifier is great for things such as c.v. joints, bearings, guides, and spline shafts.

    Long term protection for frictions heavy components.

    Liqui-Moly is a German chemical company that offers top of the line engine oils, additives, and car care products that are designed to extend the life of your engine and ensure the best lubrication and cleanliness off engine and transmission components possible. With more than 50 years of experience and reviews across the world from magazines and race teams, Liqui-Moly proves time and time again why they are one of the most innovative lead forces of performance automotive chemicals in the world.

    Liqui-Moly
    Part #: 2003
    Price: $4.46 (USD) 
    $4.95 (Sale - Save 10%)
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    E36, E46, Z4, Z4 Rear Cool Carbon S/T Performance Brake Pad Set

    Cool Carbon S/T brake pads have excellent stopping power and feel with low levels of dust and noise. Engineered for European cars with high speed development on the Autobahn, Cool Carbon is a sporty compound intended for every day use. The S/T compound has more stopping power and initial bite than stock thanks to a higher coefficient of friction and composite materials. We are big fans of these as a sporty street pad and recommend them for medium-aggressive street driving and autocross.

    • High performance for street use
    • Excellent friction/torque at various temperatures
    • Great feel and modulation
    • Low noise
    • Low-medium dust
    • rotor friendly

    Cool Carbon pads are sold as a set for each axle (4 pads total).

    This item fits the following BMWs:
    1992-1999 E36 BMW 318i 318is 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic
    1999-2006 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci
    1996-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i
    2003-2005 E85 E86 BMW Z4 2.5 Z4 3.0

    Cool Carbon Performance
    Part #: 7631-D763
    Price: $109.75 (USD) 
    $121.95 (Sale - Save 10%)
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben 2-pc 56

    Ideal for smaller sports cars with short noses.  Great for quick oil changes and underbody maintenance.

    Please take measurement below before ordering.

     

    Features:

    • Lightweight at only 4 lbs each and Withe handy carrying straps
    •  Will not slip, slide or scoot on any surface and never scratches or marks your floor
    •  100% solid core construction for additional strength
    •  56 " long,12" wide, 8" lift height, at 15 lbs each and a low 10.8 degree incline
    • Great for quick oil changes and underbody maintenance.

       

       

     

     

     

     

    Schwaben
    Part #: 006143SCH01A
    Price: $165.00 (USD) 
    $220.00 (Sale - Save 25%)
    Ships on Dec 26, 2017
    Quantity:   
    Schwaben Metric Bubble Flaring Tool Set

    When replacing old corroded brake lines this is a must have tool to get the job done right. Create a bubble flare to match the connection style is an important part of creating the proper seal. Don't forget your tube cutter.

     

    Features:

    • Creates the ISO bubble flare found on European, Japanese and some domestic model brake lines.
    • Includes hardened steel bar and adapters for 4.75mm,6mm,8mm and 10mm tubing.
    • Durable blow molded case for easy transport and organization

     

     

    Schwaben
    Part #: 006394SCH01A
    Price: $49.96 (USD) 
    $79.95 (Sale - Save 38%)
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben 1/2 If you're looking to remove a stubborn bolt and the smaller hand tools just don't cut, it's time to get a breaker bar. 1/2" Drive for added strength, 24" handle for powerful leverage, and a rounded ergonomic handle so discomfort isn't holding back your strength.
    Schwaben
    Part #: 006535SCH01A
    Price: $26.21 (USD) 
    $34.95 (Sale - Save 25%)
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    E32, E34, E36 M3, E46 M3, MZ3 Front Cool Carbon S/T Performance Brake Pad Set

    Cool Carbon S/T brake pads have excellent stopping power and feel with low levels of dust and noise. Engineered for European cars with high speed development on the Autobahn, Cool Carbon is a sporty compound intended for every day use. The S/T compound has more stopping power and initial bite than stock thanks to a higher coefficient of friction and composite materials. We are big fans of these as a sporty street pad and recommend them for medium-aggressive street driving and autocross.

    • High performance for street use
    • Excellent friction/torque at various temperatures
    • Great feel and modulation
    • Low noise
    • Low-medium dust
    • rotor friendly

    Cool Carbon pads are sold as a set for each axle (4 pads total).

    This item fits the following BMWs:
    1995-1999 E36 BMW M3
    2001-2006 E46 BMW M3
    1989-1995 E34 BMW 525i 530i 535i 540i M5
    1988-1994 E32 BMW 735i 735iL 740i 740iL 750iL
    1998-2002 Z3 BMW Z3 M Coupe M Roadster

    Cool Carbon Performance
    Part #: 7284-D394
    Price: $115.15 (USD) 
    $127.95 (Sale - Save 10%)
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben Strut Nut Socket - 24mm To secure shocks and struts to their mounts, the retaining nut must be torqued to its proper specification using a torque wrench. An improper torque value may result in premature mount failure - or worse. Strut nut sockets allow for the use of an allen wrench to hold the damper shaft while utilizing your 1/2" drive torque wrench on the socket to achieve proper torque.
    Schwaben
    Part #: 003046SCH01A-05
    Price: $11.21 (USD) 
    $14.95 (Sale - Save 25%)
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben Strut Nut Socket - 18mm To secure shocks and struts to their mounts, the retaining nut must be torqued to its proper specification using a torque wrench. An improper torque value may result in premature mount failure - or worse. Strut nut sockets allow for the use of an allen wrench to hold the damper shaft while utilizing your 1/2" drive torque wrench on the socket to achieve proper torque.
    Schwaben
    Part #: 003046SCH01A-01
    Price: $11.21 (USD) 
    $14.95 (Sale - Save 25%)
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben Strut Nut Socket - 21mm To secure shocks and struts to their mounts, the retaining nut must be torqued to its proper specification using a torque wrench. An improper torque value may result in premature mount failure - or worse. Strut nut sockets allow for the use of an allen wrench to hold the damper shaft while utilizing your 1/2" drive torque wrench on the socket to achieve proper torque.
    Schwaben
    Part #: 003046SCH01A-03
    Price: $11.21 (USD) 
    $14.95 (Sale - Save 25%)
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Wheel Storage Rack With Casters

    Now you can stack your extra wheels without the danger of scratches and scuffs. This wheel storage rack keeps your wheels spaced apart, and being on locking casters, allows you to easily move the whole set anywhere in your garage or shop at one time. Sturdy steel construction and a wide base means this wheel rack won't tip over. Holds up to 275 lbs - enough for most any wheel & tire set.

     

     

    Fits up to 8½" wide wheels, depending on offset

    Schwaben
    Part #: 003639SCH01A
    Price: $41.21 (USD) 
    $54.95 (Sale - Save 25%)
    In Stock
    Free Shipping Free Shipping
    Quantity:   
    Schwaben Deep Well Impact Socket - 27mm

    Durable Impact sockets for hard to remove fasteners safely.

    Features:

    • Brawny ½-inch drive 27mm 12-point socket
    • Specially hardened to take the added abuse from a impact gun, this socket is also coated for added protection and so you can tell it apart from non impact rated sockets
    • Accommodating 53mm depth to accommodate many applications and different length shafts.
    • Made of durable chrome moly steel, this socket is tough enough to get the job done.
    Schwaben
    Part #: 003302SCH04A
    Price: $14.96 (USD) 
    $19.95 (Sale - Save 25%)
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben Deep Well Impact Socket - 36mm

    This large socket is the perfect tool for axle nuts when servicing the axle shafts or wheel bearings.

    Features:

    • ½-inch drive 36mm 12-point socket
    • Specially hardened to take the added abuse from a impact gun
    • Coated for added protection and so you can tell it apart from non impact rated sockets
    • 75mm depth  to accommodate many applications and different length shafts
    • Made of durable chrome moly steel
    Schwaben
    Part #: 003302SCH02A
    Price: $14.96 (USD) 
    $19.95 (Sale - Save 25%)
    Ships on Jan 2, 2018
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Wall-Mounted Wheel & Tire Storage Rack

    As any mechanic either at home or in a shop knows, there is rarely enough usable floor space. At least with a wall mounted tire rack you can count on the spare tires to be out of your way. Space is not the only factor for choosing a wheel storage product like this, most people don't realize that a concrete floor actually draws moisture leaving your tires to dryout even faster.


    Features:

    • Adjustable links allow you to store any size from 12" wheels to 19" wheels with tires
    • Folds flat against the wall when not in use to maximize your usable space
    • Supports up to 250 lbs and weighing in at only 20 lbs itself
    • 46" wide storage area (holds up to four 11½" wide tires)
    • Sturdy steel construction
    • Mounting holes spaced 48" apart for mounting to standard center studs
    Schwaben
    Part #: 003638SCH01A
    Price: $44.96 (USD) 
    $59.95 (Sale - Save 25%)
    In Stock
    Free Shipping Free Shipping
    Quantity:   
    ECS E36 Silicone Radiator Hose Kit

    Unlike factory rubber hoses, silicone can withstand higher temperatures and pressures with minmal wear. Rubber will wear out and weaken so don't let it bite you when it counts! Silicone has been proven during extreme racing conditions and won't be the weak link that ruins your day.

    This E36 ECS silicone hose set replaces two hoses - 
    11531708499, upper radiator hose 
    11531726344, lower radiator hose 

    ECS
    Part #: 003628ECS01
    Price: $64.95 (USD) 
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben 12 Pc Metric Combination Wrench Set

    Quality combination wrenches are a must when doing any kind of automotive work.

    Features:

    • A complete set from 8 to 19 mm 
    • Professional quality wrenches in full length feature open end on one end and 12 pt box on the other
    • Satin finish provides superior feel, slip resistant grip, easy cleanup and inhibits rust
    • Includes sturdy wrench holder for easy storage
    • Limited Lifetime Warranty

     

    Schwaben
    Part #: 005989SCH01A
    Price: $44.96 (USD) 
    $59.95 (Sale - Save 25%)
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben LED Underhood Shop Light

    This underhood light was designed especially for automotive under the hood work. Featuring 120 super bright LEDS for complete engine bay illumination. Built from heavy duty materials, Thermoplastic Rubber, Aluminum and ABS . LEDS are fully protected by a polycarbonate transparent lens.To protect the hood from scratches, hooks have a soft foam covering. LEDs are designed to last up to 100,000 hours for years of trouble free service.

    Features:

    • Corded 120 LED's
    • Rugged heavy-duty design for long life.
    • Made from ABS, thermoplastic rubber and aluminum.
    • Polycarbonate transparent lens.
    • Spring loaded built in telescopic mounting brackets hold tight onto hood.
    • Soft padded hooks provide good protection against hood scratches.
    •  Long 15ft power cord.
    • Two working modes : Low beam and high beam illumination.
    • On and off power switch.
    • Working hood width : 48 to 74 in.

     

     

    Schwaben
    Part #: 006191SCH01A
    Price: $74.96 (USD) 
    $99.95 (Sale - Save 25%)
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    E36/E46/Z3 ECS Tuning Aluminum Power Steering Pulley Most of the pulleys on your BMW engine are plastic, which become brittle and frail over time and from engine bay heat. A failed pulley could leave you stranded which is why it is vital to inspect the pulleys during routine maintenance. This is a stylized aluminum version of the stock power steering pulley used on M52, M52tu, and M54 engines. It's the same size and uses the same hardware and the original belt as the stock plastic pulley but the aluminum will last much longer.
    ECS
    Part #: 003042ECS01
    Price: $49.95 (USD) 
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    ECS Tuning Wheel Spacer & Bolt Kit - 17.5mm - 72.6mm CB

    Drastically improve the looks of your vehicle while improving your vehicle's handling characteristics and/or easily adjust your wheel fitment to allow for the proper clearance when installing parts such as new wheels, big brake kits, or lowering suspension components.Interference from components such as shocks, springs, or control arms are a common issue when installing wheel that are not a direct OE size replacement. By moving your wheels a few millimeters each, you can give yourself enough clearance for proper wheel fitment and give your car a wider stance in the process.

    ECS Tuning wheel spacers are constructed of high quality 6061-T6 aircraft grade aluminum and are specifically designed by in-house engineers and cnc machined to exact standards, ensuring the best fitment possible. By carefully measuring the OEM wheel hubs and bore dimensions, these spacers mount with minimal clearance to prevent any vibration, retaining the stock-like vibration free operation. 

    This kit includes wheel bolts that are lab tested to meet or exceed ISO 898 class 10.9 mechanical and physical properties to ensure perfect fastening of the wheel to the hub with no issues or potential to snap under aggressive driving conditions.

    ECS Tuning is a performance and genuine parts provider that designs their ECS Tuning branded aftermarket automotive parts in-house to ensure the highest quality and affordability possible. Every part's design is subjected to a rigorous test fit and stress test period to guarantee proper fitment and continued reliability for years to come.

     

    This item fits the following BMWs:

    2008-2012 E82 BMW 128i 135 1M
    ​1988-1991 E30 BMW M3
    1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
    1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
    2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
    2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
    2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
    2007-2012 E93 BMW 328i 335i M3 - Convertible
    1982-1988 E28 BMW 524td 528e 533i 535i 535is M5
    1989-1995 E34 BMW 525i 530i 535i 540i M5
    2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i M5
    1982-1989 E24 BMW 633csi 635csi M6
    2004-2010 E63 BMW 645ci 650i M6
    1981-1987 E23 BMW 733i 735i
    1988-1994 E32 BMW 735i 735il 740i 740il 750il
    1995-2001 E38 BMW 740i 740il 750il
    1990-1999 E31 BMW 840i 840ci 850i 850ci 850csi
    1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
    2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
    2009-2016 Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is

    ECS
    Part #: ECS#256KTWB
    Price: $109.95 (USD) 
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Liqui Moly Voll-Synthese Energy 0w-40 Engine Oil - 5 Liter

    Liqui-Moly's Voll-Synthese Energy engine oil is specifically formulated for optimum oil penetration speed, deposit prevention, and resistance to aging. These factors allow for exceptional gasoline or diesel engine cleanliness, keeping the surfaces of the engine and engine components free from carbon and sludge deposits. This allows the oil to form a stronger film that in turn helps prevent wear much more efficiently than many standard oils. This also allows for easy, smooth engine operation that results in better responsiveness and less total fuel consumption.

    Meets the following requirements;

    • ACEA A3-98/B3-98
    • API SJ-CF
    • BMW [Longlife] LL-98
    • Daimler (MB 229.1)
    • VW 502.00 - 505.00

    Liqui-Moly is a German chemical company that offers top of the line engine oils, additives, and car care products that are designed to extend the life of your engine and ensure the best lubrication and cleanliness off engine and transmission components possible. With more than 50 years of experience and reviews across the world from magazines and race teams, Liqui-Moly proves time and time again why they are one of the most innovative lead forces of performance automotive chemicals in the world.

    Liqui-Moly
    Part #: 2050
    Price: $40.46 (USD) 
    $44.95 (Sale - Save 10%)
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben 7/8

    The Schwaben oxygen sensor wrench has a six-point pivot head to provide a secure grip on stubbornly tight oxygen sensors located in awkward, inaccessible locations.

    Features:

    • Premium chrome plated
    • Slotted socket head that slips over the sensor wire
    • Long angled handle for leverage

     

    Schwaben
    Part #: FO-78
    Price: $22.46 (USD) 
    $29.95 (Sale - Save 25%)
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    aFe Pro5R Air Filter - E30 1986-1991 (no M3), 86+ 528e, E34 525i (M20), E32 750iL (x2) This is a drop-in stock replacement aFe performance air filter that installs into your BMW's factory airbox. This particular filter fits the following BMWs:

    E30 3 series : 318i, 318is 318i Convertible 1990-1991
    E30 3 series : 325e, 325es 1986-1988
    E30 3 series : 325i, 325is 325ic, 325ix 1987-1991
    E28 5 Series : 528e 1986-1988
    E34 5 Series : 525i 1989-1990
    E32 7 Series
    : 750il 1988-1994 (requires 2 of these filters).

    This version uses aFe's highest flowing filter media, which uses a lightly oil gauze to filter out dirt and particulates, while allowing more air to flow to the intake. For the best flowing filter, with the best performance gain, we always recommend this standard aFe filter media (often called "Pro5R ", which has a blue pre-oiled filter media). We also carry this filter in the "ProDry" grey filter media, which is oil-free for only slightly less performance and no maintenance.
    AFE
    Part #: 30-10047
    Price: $44.96 (USD) 
    $49.95 (Sale - Save 10%)
    Direct Ship
    Free Shipping Free Shipping
    Quantity:   
    aFe Pre-Filter for aFe Intake Kits # 54-10171, 54-10441 & 54-10451 Prevent water, mud and sand from congesting your air intake system with the aFe Pre-Filter. This aFe Pre-Filter slips right over your performance air filter, adding an extra layer of defense against moisture, grime and other roadway filth, extending the cleaning interval of your aFe filter. Water is repelled by the proprietary hydrophobic treatment to the Pre-Filter’s polyester fabric, and the pre-filters uniformly spaced micron holes prevent debris .005” or larger from passing through. Best of all, using the Pre-Filter does not significantly diminish your air filter’s performance—the smooth rush of oxygen keeps rolling right into your engine. Visually, the Pre-Filter blends in seamlessly with your aFe Cold Air Intake System and other components under your hood.

    This particular pre-filter is custom sized to fit the following aFe Intake Kits:
    54-10171 (E36 6 Cylinder)
    54-10441 (E46 323i/325i/328i/Ci 99-2003)
    54-10451 (E46 330i/Ci (all) & 325i/Ci 2003-2005)
    AFE
    Part #: 28-10093
    Price: $29.66 (USD) 
    $32.95 (Sale - Save 10%)
    Direct Ship
    Free Shipping Free Shipping
    Quantity:   
    aFe Pro5R Air Filter - E36/Z3 4 cylinder - 318i 318is 318ti & Z3 1.9 This is a drop-in stock replacement aFe performance air filter that installs into your BMW's factory airbox. This particular filter fits the following BMWs:

    E36 3 series : 318i 318is 318ti
    Z3 : Z3 1.9

    This version uses aFe's highest flowing filter media, which uses a lightly oil gauze to filter out dirt and particulates, while allowing more air to flow to the intake. For the best flowing filter, with the best performance gain, we always recommend this standard aFe filter media (often called "Pro5R ", which has a blue pre-oiled filter media). We also carry this filter in the "ProDry" grey filter media, which is oil-free for only slightly less performance and no maintenance.
    AFE
    Part #: 30-10046
    Price: $56.66 (USD) 
    $62.95 (Sale - Save 10%)
    Direct Ship
    Free Shipping Free Shipping
    Quantity:   
    Schwaben Professional Magnetic Camber/Caster Gauge

     Make precision camber and caster adjustment easily and quickly. 

    Can be mounted directly to the hub on some cars or a wheel mount kit.

    Features:

    • Reads camber from +6° to -6° accurate to 1/4°.
    • Caster readout from +12º to -4º in 1/2º increments.
    • Strong magnetic adapter.
    • Long lasting black powder-coated finish.
    • Comes with silver carrying case with foam insert for storage and on the go adjustments
    Schwaben
    Part #: 010887SCH01A
    Price: $104.96 (USD) 
    $139.95 (Sale - Save 25%)
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben Remote Starter Switch

    Great for compression tests, aligning timing marks, belt installation and much more.

    Features:

    • High 20 amp rating.
    • 5 ft heavy duty leads.
    • Convenient hot circuit indicator light.
    • Non-slip rubber grip.

     

    Schwaben
    Part #: 010611SCH01A
    Price: $22.46 (USD) 
    $29.95 (Sale - Save 25%)
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Turner Centered Polyurethane Front Control Arm Bushing - 95A - Pre-Installed In Brackets - E36, Z3, E30

    Here at Turner we understand the importance of an upgrade that will get the results you need on the track and still be tolerable on the drive around town. When it comes to control arms on the track, making them as stiff as you can (usually using solid mounts) is the best way to increase your driving precision by eliminating the deflection of rubber. The next best thing to create a balance would be to stiffen up the control arm with polyurethane, giving you the option of a more stock like feel with 80a or closer to the solid feel wit