Free Shipping on orders $99 and up! Some exclusions apply. Contiguous US only.

BMW E39 M5 H&R Wheel Spacers

BMW E39 M5 H&R Wheel Spacers When it comes to all-out cornering performance, one rule applies: wider is really, truly better. H&R TRAK+ wheel spacers let you balance the handling and performance of your car to suit your aggressive driving style. Most manufacturers, even Porsche and BMW, leave 20 to 30mm of extra space between the tire and the fender to suit arcane regulations or to leave space for flapping tire chains. These light-alloy spacers push your existing wheels or even your hot, aftermarket alloys out to fill the wheelwells properly, giving you better cornering, better aerodynamics and even better looks.

Spacers are purchased based on the size required - click here for tips on how to measure.
You're currently viewing parts for your (E39) M5 2000-2003. Reset your chassis
For accurate results, specify your model below.
E39 25mm H&R Bolt-On Wheel Spacers (Pair) 25mm = .98"
5/120 bolt pattern; 74.0 center bore
DRA type = spacer fits in between the wheel and the hub. The spacer is bolted to the hub with special bolts (included). Your wheel bolts to the spacer.
Hubcentric = Yes, this spacer comes with a new hubcentric lip for the wheel to rest on

H&R's 25mm wheel spacers are Made in Germany and are TUV approved. H&R manufacturers their spacers from a super lightweight aluminum/magnesium alloy for excellent strength and also to save unsprung weight. The spacers are drilled for additional lightness and easy fitment. They are then hard anodized for durability. These are not low quality universal spacers - the bolt pattern, hub sizing, and other dimensions are designed to be used on BMW models only.

This is a DRA-type spacer - the spacer is bolted to the hub with special bolts (included). You then bolt to your wheel to the spacer with your stock wheel bolts.

Wheel Spacer FAQ
How To Measure for Spacers
Wheel Spacer Encyclopedia - everything you wanted to know

This item fits the following BMWs:
1997-2003 E39 BMW 525i 528i 530i 540i M5
H&R
Part #: 5075740
Price: $159.95 (USD) 
Direct Ship
Free Shipping Free Shipping
Quantity:   
E39 12mm H&R Wheel Spacers (Pair) 12mm = .47"
5/120 bolt pattern; 74.00 center bore
DR type = spacer fits in between the wheel and the hub. Longer wheel bolts are required.
Hubcentric = Yes, this spacer comes with a new hubcentric lip for the wheel to rest on

H&R's 12mm wheel spacers are Made in Germany and are TUV approved. H&R manufacturers their spacers from a super lightweight aluminum/magnesium alloy for excellent strength and also to save unsprung weight. The spacers are drilled for additional lightness and easy fitment. They are then hard anodized for durability. These are not low quality universal spacers - the bolt pattern, hub sizing, and other dimensions are designed to be used on BMW E39 models only.

Longer wheel bolts are required. Choose from black or silver bolts from the options below.

Wheel Spacer FAQ
How To Measure for Spacers
Wheel Spacer Encyclopedia - everything you wanted to know



This item fits the following BMWs:
1997-2003 E39 BMW 525i 528i 530i 540i M5
H&R
Part #: 2475740
Price: $99.95 (USD) 
In Stock
E39 30mm H&R Bolt-On Wheel Spacers (Pair) 30mm = 1.18"
5/120 bolt pattern; 74.0 center bore
DRA type = spacer fits in between the wheel and the hub. The spacer is bolted to the hub with special bolts (included). Your wheel bolts to the spacer.
Hubcentric = Yes, this spacer comes with a new hubcentric lip for the wheel to rest on

H&R's 30mm wheel spacers are Made in Germany and are TUV approved. H&R manufacturers their spacers from a super lightweight aluminum/magnesium alloy for excellent strength and also to save unsprung weight. The spacers are drilled for additional lightness and easy fitment. They are then hard anodized for durability. These are not low quality universal spacers - the bolt pattern, hub sizing, and other dimensions are designed to be used on BMW models only.

This is a DRA-type spacer - the spacer is bolted to the hub with special bolts (included). You then bolt to your wheel to the spacer with your stock wheel bolts.

Wheel Spacer FAQ
How To Measure for Spacers
Wheel Spacer Encyclopedia - everything you wanted to know

This item fits the following BMWs:
1997-2003 E39 BMW 525i 528i 530i 540i M5
H&R
Part #: 6075740
Price: $179.95 (USD) 
Direct Ship
Free Shipping Free Shipping
Quantity:   
Wheel Spacer Test Fitment Kit

Unsure of what size spacer will work best for you? This professional kit includes 1mm, 2.5mm, 5mm, 10mm, and 15mm spacers with wheel studs and nuts for you play with. These are not the same spacers that we sell and they cannot be used to drive on. But with the studs installed the car can be lowered to the ground and rolled to check for clearances. These test fit spacers are drilled to fit the standard BMW 5x120 bolt pattern as well as 4-lug 4x100 (and VW/Audi bolt patterns too). You can stack spacers to achieve the perfect clearance. When you're ready call us to order the spacers you need (Turner spacers come in 3mm, 5mm, 7.5mm, 10mm, 12.5mm, 15mm, 17.5mm, 20mm, 25mm, and 30mm spacer thicknesses).

These spacers are not for driving on. They lack the hubcentric lip that BMW wheels are designed to work with. Driving on studs alone will lead to a failure.

Two ways to buy -

  • Own. Just as it says, you buy this kit to own. Perfect for shops or race teams that change wheels or brake components often. For shops you can measure wheel clearance and order the correct spacers the first time around (no wasting inventory or paying return shipping). Note: Kits purchased to Own are not returnable for refunds.
  • Rent. Pay the full price but get $110 as a store credit when you return the kit. We keep a modest $19.95 fee for the service. Perfect for DIY and enthusiasts who only need the Test Kit once. Use your store credit to purchase your spacers (or anything else from our catalog).

 

Wheel Spacer FAQ:
How to measure for wheel spacers
Wheel spacer encyclopedia

 

ECS
Part #: 001202ECS03
Price: $129.95 (USD) 
In Stock
Free Shipping Free Shipping
E39 15mm H&R Wheel Spacers (Pair) 15mm = .59"
5/120 bolt pattern; 74.0 center bore
DR type = spacer fits in between the wheel and the hub. Longer wheel bolts are required.
Hubcentric = Yes, this spacer comes with a new hubcentric lip for the wheel to rest on

H&R's 15mm wheel spacers are Made in Germany and are TUV approved. H&R manufacturers their spacers from a super lightweight aluminum/magnesium alloy for excellent strength and also to save unsprung weight. The spacers are drilled for additional lightness and easy fitment. They are then hard anodized for durability. These are not low quality universal spacers - the bolt pattern, hub sizing, and other dimensions are designed to be used on BMW models only.

Longer wheel bolts are required. Choose from black or silver bolts from the options below.

Wheel Spacer FAQ
How To Measure for Spacers
Wheel Spacer Encyclopedia - everything you wanted to know

This item fits the following BMWs:
1997-2003 E39 BMW 525i 528i 530i 540i M5
H&R
Part #: 3075740
Price: $115.95 (USD) 
Direct Ship
Free Shipping Free Shipping
Quantity:   
E39 20mm H&R Wheel Adapter Set To Fit E36/E46 Wheels To E39 5-series 20mm = .79"
5/120 bolt pattern; 72.5 center bore
DRA type = spacer fits in between the wheel and the hub. The spacer is bolted to the hub with special bolts (included). Your wheel bolts to the spacer.
Hubcentric = Yes, this spacer comes with a new hubcentric lip for the wheel to rest on

These special 20mm wheel spacers allow an E39 owner to use E36 or E46 wheels on their car. These spacers are the correct 74.0mm center-bore on the inside and 72.5mm center bore on the outside for the wheel to sit on. This spacer will reduce the wheel offset by 20mm. This difference in center bore has left a lot of E39 owners out in the cold when it came to wheel options (especially in the winter). H&R has worked up this easy solution. This is a DRA spacer system - the spacer bolts to the hub with special bolts; your wheel then bolts to the spacer.Note about E36 and E46 wheels – there is a large range in offsets on these wheels. The lowest offset we have seen is 35mm; the highest offset is 49mm. The desired offset for the E39 is 20mm, depending on wheel width. H&R makes these wheel adapters in 15mm and 20mm thicknesses. If your E36/E46 wheel is above 43mm in offset, you will run into the problem of the wheel tucked in too far. When looking at E36/E46 wheels, try to stay in the 35-43mm offset range.Spacers are sold in pairs (1 axle). This item fits the following BMWs:
1997-2003 E39 BMW 525i 528i 530i 540i M5
H&R
Part #: 4075740725
Price: $139.95 (USD) 
Direct Ship
Free Shipping Free Shipping
Quantity:   
E39 5mm H&R Wheel Spacers (Pair) 5mm = .20"
5/120 bolt pattern; 74.0 center bore
DR type = spacer fits in between the wheel and the hub. Longer wheel bolts are required.
Hubcentric = Yes*, the original hub lip still protrudes through the spacer

H&R's 5mm wheel spacers are Made in Germany and are TUV approved. H&R manufacturers their spacers from a super lightweight aluminum/magnesium alloy for excellent strength and also to save unsprung weight. The spacers are drilled for additional lightness and easy fitment. They are then hard anodized for durability. These are not low quality universal spacers - the bolt pattern, hub sizing, and other dimensions are designed to be used on BMW models only.

This spacer slips on the existing hub lip and leaves some lip left over for the wheel to rest on. This keeps the wheel hubcentric*.
* - To avoid vibration, 5mm spacers work best with wheels that have a flush mounting surface. Wheels that have a bevel around the mounting surface will not be fully seated on the hub and a vibration may result.

Longer wheel bolts are strongly recommended. Choose from black or silver bolts from the options below. Wheel locks to work with this spacer size are also available.

Wheel Spacer FAQ
How To Measure for Spacers
Wheel Spacer Encyclopedia - everything you wanted to know

This item fits the following BMWs:
1997-2003 E39 BMW 525i 528i 530i 540i M5
H&R
Part #: 1075740
Price: $69.95 (USD) 
Direct Ship
Free Shipping Free Shipping
Quantity:   
E39 20mm H&R Wheel Spacers (pair) 20mm = .79"
5/120 bolt pattern; 74.0 center bore
DR type = spacer fits in between the wheel and the hub. Longer wheel bolts are required.
Hubcentric = Yes, this spacer comes with a new hubcentric lip for the wheel to rest on

H&R's 20mm wheel spacers are Made in Germany and are TUV approved. H&R manufacturers their spacers from a super lightweight aluminum/magnesium alloy for excellent strength and also to save unsprung weight. The spacers are drilled for additional lightness and easy fitment. They are then hard anodized for durability. These are not low quality universal spacers - the bolt pattern, hub sizing, and other dimensions are designed to be used on BMW models only.

Longer wheel bolts are required. Choose from black or silver bolts from the options below.

Wheel Spacer FAQ
How To Measure for Spacers
Wheel Spacer Encyclopedia - everything you wanted to know

This item fits the following BMWs:
1997-2003 E39 BMW 525i 528i 530i 540i M5
H&R
Part #: 4075740
Price: $119.95 (USD) 
In Stock
Free Shipping Free Shipping
Quantity:   
E39 15mm H&R Wheel Adapter Set To Fit E36/E46 Wheels To E39 5-series 15mm = .59"
5/120 bolt pattern; 74.0 to 72.5 center bore
DR type = spacer fits in between the wheel and the hub. Longer wheel bolts are required.
Hubcentric = Yes, this spacer comes with a new hubcentric lip for the wheel to rest on

These special 15mm wheel spacers allow an E39 owner to use E36 or E46 wheels on their car. These spacers are the correct 74.0mm center-bore to fit on the hub and 72.5mm center bore on the outside for the wheel to sit on. This spacer will reduce the wheel offset by 15mm. This difference in center bore has left a lot of E39 owners out in the cold when it came to wheel options (especially in the winter). H&R has worked up this easy solution.Note about E36 and E46 wheels – there is a large range in offsets on these wheels. The lowest offset we have seen is 35mm; the highest offset is 49mm. The desired offset for the E39 is 20mm, depending on wheel width. H&R makes these wheel adapters in 15mm and 20mm thicknesses. If your E36/E46 wheel is above 43mm in offset, you will run into the problem of the wheel tucked in too far. When looking at E36/E46 wheels, try to stay in the 35-43mm offset range.Spacers are sold in pairs (1 axle) without bolts.

This item fits the following BMWs:
1997-2003 E39 BMW 525i 528i 530i 540i M5
H&R
Part #: 3075740725
Price: $139.95 (USD) 
In Stock
Free Shipping Free Shipping
Quantity:   
E39 10mm H&R Wheel Spacers (Pair) 10mm = .39"
5/120 bolt pattern; 74.0 center bore
DR type = spacer fits in between the wheel and the hub. Longer wheel bolts are required.
Hubcentric = Yes, this spacer comes with a new hubcentric lip for the wheel to rest on

H&R's 10mm wheel spacers are Made in Germany and are TUV approved. H&R manufacturers their spacers from a super lightweight aluminum/magnesium alloy for excellent strength and also to save unsprung weight. The spacers are drilled for additional lightness and easy fitment. They are then hard anodized for durability. These are not low quality universal spacers - the bolt pattern, hub sizing, and other dimensions are designed to be used on BMW models only.

This spacer slips on the existing hub lip and includes a new lip for the wheel to rest on. 10mm spacers are considered a custom fitment and special consideration must be given to ensure the spacer is fully seated on the lip (and not bottoming out on the stock hub lip). Modification of the stock hub lip may be required.

Longer wheel bolts are required. Choose from black or silver bolts from the options below.

Wheel Spacer FAQ
How To Measure for Spacers
Wheel Spacer Encyclopedia - everything you wanted to know

This item fits the following BMWs:
1997-2003 E39 BMW 525i 528i 530i 540i M5
H&R
Part #: 2075740
Price: $99.95 (USD) 
Direct Ship
Free Shipping Free Shipping
Quantity: