Free Shipping on orders $99 and up! Some exclusions apply. Contiguous US only.

BMW E39 Water Pumps

BMW E39 Water Pumps When maintained, your BMW's cooling system should be bulletproof. The weakest link on any BMW model is likely to be the water pump, thermostat, or electrical parts on the newer models. BMW water pumps have gone through many design and material changes over the years in an effort to make the cooling system more efficient and reduce parasitic drag on the engine. The water pumps we sell are the latest and best designs that BMW and OEM suppliers can produce. Whenever possible we prefer to sell a water pump with a composite impeller, not metal. The latest BMW designs use a composite impeller that is far lighter than metal and much stronger than plastic. Metal impeller pumps are typically heavier and may have bearing problems that lead to premature leaks. Plastic pumps were infamous in the mid-1990s for disintegrating. The composite impellers have proven themselves for over a decade as a trouble-free and efficient design and many of the OEM suppliers are also introducing updated composite designs for older models too.
You're currently viewing parts for your (E39) 5-Series 1996-2003. Reset your chassis
For accurate results, specify your model below.
Water Pump Pulley - E46 E39 Z3 This is the stock water pump pulley that mounts between the engine fan and the water pump. We have seen these plastic or composite pulleys crack around the mounting bolt holes. If left un-noticed the whole pulley can fall apart which will immediately disable the car and possibly leave you stranded. It can also break while performing other work around it such as removing the fan, replacing the water pump, or even just replacing the belt. Replacing this pulley while doing the water pump can be a good preventative measure.

This item fits the following BMWs:
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
1999-2003 E39 BMW 525i 528i 530i
2004-2010 E60 BMW 525i 530i
2004-2006 E83 BMW X3 2.5i X3 3.0i
2000-2006 E53 BMW X5 3.0i
1999-2002 Z3 BMW Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i
2003-2005 Z4 BMW Z4 2.5i Z4 3.0i
Packaged by Turner
Part #: 11511436590
Price: $22.89 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Laso Water Pump - E39 M5 This water pump (11511407113) and gasket (11511406765) is a direct replacement for your stock pump. We offer this from the OEM supplier Laso and is Made in Germany to BMW's precise standards. This water pump comes with a new gasket to finish off the install. The thermostat is also located in the water pump housing so you may also want to consider replacing that at the same time.

This item fits the following BMWs:
1999-2003 E39 BMW M5
2000-2003 E52 BMW Z8 Roadster (not Alpina Roadster)
Laso
Part #: TMS12990
Price: $288.95 (USD) 
Ships in 1 day
Free Shipping Free Shipping
Quantity:   
Complete Cooling System Overhaul Package - 1999-2003 E39 525i 528i 530i This is a compete cooling system overhaul kit, which includes all the common cooling system failure parts bundled into a complete package. This cooling system package is for the 1999-2000 528i with the M52TU engine and the 2001-2003 525i and 530i with the M54 engine. This package applies to cars equipped with either the manual or automatic transmission.

Much of the later E39 cooling system is strong and reliable and doesn't suffer the same types of problems associated with earlier E39 and E36 systems. But there is still the potential for serious cooling system and engine-related failures. Several of the primary cooling components are prone to failure within 80k miles (or less in many cases). A failure in the cooling system can lead to overheating and catastrophic engine failure. Don't gamble your engine! By replacing these core items preventatively, such as the thermostat housing, radiator, and waterpump, you are defusing what could be a ticking cooling system time bomb. And if you've had a failure of one of these parts, now is the time to refresh your entire cooling system. Our kit includes an OEM Behr radiator, an Original BMW water pump (with updated composite impeller), thermostat with housing, radiator cap, and new radiator hoses.

Optional items (which can be added below):
- Original BMW antifreeze
- Upgrade the water pump to a Stewart EMP High Performance pump
- Add a new coolant expansion tank (known for cracking)
- Add a new coolant level sensor (known for failing / throwing "check coolant" messages)
- Add a new coolant temp sensor (located in lower radiator hose and the seal ring may cause leaks if re-used)

This cooling system overhaul kit fits the following BMWs:
1999-2003 E39 BMW 525i 528i 530i
Packaged by Turner
Part #: TMS14415
Price: $389.60 (USD) 
Ships on Jun 28, 2018
Free Shipping Free Shipping
Water Pump Pulley - E36 E39 Z3 This is the stock water pump pulley that mounts between the engine fan and the water pump. We have seen these plastic or composite pulleys crack around the mounting bolt holes. If left un-noticed the whole pulley can fall apart which will immediately disable the car and possibly leave you stranded. It can also break while performing other work around it such as removing the fan, replacing the water pump, or even just replacing the belt. Replacing this pulley while doing the water pump can be a good preventative measure.

This pulley is available in two different styles - the stock plastic or a stronger aluminum version. The same drawbacks with the stock pulley also apply to this plastic version. But if you're replacing the water pump on a regular basis then you should also replace the plastic pulley. The aluminum pulley will obviously last much longer. Both are the same size as the stock original pulley.

This item fits the following BMWs:
1992-1998 E36 BMW 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1997-1998 E39 BMW 528i
1997-1998 Z3 BMW Z3 2.8
1998-2000 Z3 BMW M Roadster M Coupe
Packaged by Turner
Part #: 11511730554
Price: $27.42 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Complete Cooling System Overhaul Package - 1997-1998 E39 540i This is a compete cooling system overhaul kit, which includes all the common cooling system failure parts bundled into a complete package. This cooling system package is for the 1997-1998 540i with the M62 4.4-liter engine (non-VAN0S). This package applies to cars equipped with either the manual or automatic transmission (select the appropriate parts in the menu below).

A failure in the cooling system can lead to overheating and catastrophic engine failure. Don't gamble your engine! By replacing these core items preventatively, such as the thermostat housing, radiator, and waterpump, you are defusing what could be a ticking cooling system time bomb. And if you've had a failure of one of these parts, now is the time to refresh your entire cooling system.

Basic Kit Contents:
1711702969, radiator (OEM Behr)
11510393340, water pump (OEM)
13621703993, coolant temp sensor (located in the water pump housing)
11531437526, thermostat with housing and sensor (OEM Behr/Hella)
11531745595, upper radiator hose (OEM)
11531741409, lower radiator hose (OEM)
11531741404, expansion tank hose (OEM)
17111741167, expansion tank (OEM Behr)
17111742231, expansion tank cap (OEM Behr)

Cooling Kit Options:
540 Water Pump Options
(click to expand)
There are three versions of the water pump for the early 1997-1998 540i: OEM plastic impeller, updated metal impeller, and the more recently updated composite impeller. We recommend either the metal or composite impeller. These are what we use the most in our shop and what our technicians are comfortable with. On more recent models, BMW has used the composite impeller as original. There doesn't seem to be evidence of the plastic failing on this design (it did on the E36 3-series) but we feel most comfortable with the other options. Both the metal and composite manufacturers are OEM for BMW.

Use the options below to build your cooling package.

Buy as a package and save $$$!

This cooling system overhaul kit fits the following BMWs:
1997-1998 E39 BMW 540i
Packaged by Turner
Part #: TMS14416
Price: $442.85 (USD) 
Ships in 9 days
Free Shipping Free Shipping
E36/E46/Z3/Z4 ECS Tuning Aluminum Water Pump Pulley

Most of the pulleys on your BMW engine are plastic, which become brittle and frail over time and from engine bay heat. A failed pulley could leave you stranded which is why it is vital to inspect the pulleys during routine maintenance. This is an aluminum version of the stock water pump pulley used on the M50/M52/M52TU/M54 engine in the E36, E46, Z3, Z4, and other models. It's uses the same hardware and the original belt as the stock plastic pulley. But the aluminum will last much longer.

Fit the following BMWs: 
1992-1995 E34 BMW - 525i M50 (provides an 8% overdrive)
1992-1999 E36 BMW - 325i 325ic 325is 323i 323is 328i 328is 328ic M3 (provides an 8% overdrive)
1997-09/1998 E39 BMW - 528i (provides an 8% overdrive)
09/1998-2003 E39 BMW - 525i 528i 530i (factory size)
1999-2006 E46 BMW - 323i 323Ci 325i 325Ci 325xi 328Ci 328i 330i 330xi 330Ci (factory size)
2000-2006 E53 X5 BMW - 3.0i (factory size)
2004-2005 E60 BMW - 525i 530i M54 engine (factory size)
2004-2005 E83 X3 BMW - 2.5i 3.0i M54 engine (factory size)
1997-2000 E36/7 Z3 BMW - 2.8i MZ3 (provides an 8% overdrive
1999-2002 E36/7 Z3 BMW - 2.3 2.5 2.5i 3.0i (factory size)
2003-2006 E85/6 Z4 BMW - 2.5i 3.0i M54 engine (factory size)

ECS
Part #: 001977ECS03A
Price: $40.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
EMP/Stewart High Performance Water Pump for BMW M50/M52/M54/S50/S52 6 Cylinder Engines This high performance water pump is a direct replacement pump designed to fit a wide range of BMW engines with no modifications. That includes accepting the Factory Fan Clutch. The front of the BMW High Performance Water Pump is stock appearing giving it that classic BMW look while the back is all business. Features up to 20% increase of water flow over stock pump, and it TWICE as efficient as factory pump, much less parasitic drag than other pumps, stainless steel impeller, heavy duty bearing, high quality water seal. Manufactured by EMP / Stewart Components. THIS PUMP COMES WITH A LIMITED LIFETIME WARRANTY

Fits all US Spec M50/52/54 and S50/52 6 cylinder engines including:
E36 chassis 1992-1999 325,328, 323 and M3
E46 chassis 1999-2005 323,325,328 &330
E34 chassis 1991-1995 525i
E39 chassis 1997-2003 525i, 528i & 530i
E53 X5 SAV 1999-2003 6 cylinder models
Z3 2.8 and 3.0 6 cylinder engines.
Z4 (Not M) including Z4 2.5 & 3.0
Stewart Components
Part #: TMS3780
Price: $195.00 (USD) 
In Stock
Free Shipping Free Shipping
Quantity:   
Complete Cooling System Overhaul Package - 1997-1998 E39 528i This is a compete cooling system overhaul kit, which includes all the common M52 cooling system failure parts bundled into a complete package. This cooling system package is for the 1997-1998 528i with the M52 engine with either the manual or automatic transmission.

Much of the E39 cooling system is shared with the 3-series cars of the same era. Which means the potential for serious cooling system and engine-related failures. Several of the primary cooling components are prone to failure within 60k miles (or less in many cases). A failure in the cooling system can lead to overheating and catastrophic engine failure. Don't gamble your engine! By replacing these core items preventatively, such as the radiator & waterpump, you are defusing what could be a ticking cooling system time bomb. And if you've had a failure of one of these parts, now is the time to refresh your cooling system. Our kit includes one OEM Behr radiator, an Original BMW water pump (with updated composite impeller), thermostat, radiator cap, and new radiator hoses.

Basic Kit Contents:
17111702969, radiator (OEM Behr)
11517527799, water pump (OE BMW)
11537511580, 88°C thermostat (OEM Behr/Hella)
11531740832, upper radiator hose (OEM Rein/CRP)
11531740481, lower radiator hose (OEM Rein/CRP)
17111427156, expansion tank hose (OEM Rein/CRP)
17111742231, expansion tank cap (OEM Behr/Hella)

Cooling Kit Options:
E39 Water Pump Options
(click to expand)
OE BMW with composite impeller. The original BMW water pumps had plastic impellers which degraded and failed. The latest design uses composites that are much better and will not corrode. Compared to a metal impeller, the composite is lighter so it's more efficient and it will not wear out the bearings. We don't even offer the metal impeller pumps with this kit because the BMW composite one is so much better.
Stewart high performance. The ultimate in M50 water pumps! It features a stainless steel impeller, heavy-duty bearings, a better o-ring seal, and flows 20% more than the stock pump. If indestructible is what you're looking for, this is the pump to go with. It also comes with a lifetime warranty for piece of mind.
E39 Expansion Tank
(click to expand)
The original expansion tank is prone to cracks and leakage. Again - it's made from a weak plastic. The material has improved over the years but the only option remains an OEM plastic tank. It's a good idea to replace it if you're doing a whole overhaul. Don't re-use the original tank if you're going to the trouble of replacing everything else!
E39 Thermostat Housing
(click to expand)
The original BMW plastic thermostat housing is brittle and does not seal well. We only sell it under protest. Instead we've been selling this aluminum housing for the last 20+ years. The aluminum does not have the same shortcomings as the plastic one. We made this item an option in case you already have the aluminum housing.

Use the options below to build your cooling package.

This cooling system overhaul kit fits the following BMWs:
1997-1998 E39 BMW 528i
Packaged by Turner
Part #: TMS14414
Price: $454.93 (USD) 
Ships in 9 days
Free Shipping Free Shipping
Complete Cooling System Overhaul Package - 1999-2003 E39 540i, 1999-2001 E38 740i/iL This is a compete cooling system overhaul kit, which includes all the common cooling system failure parts bundled into a complete package. This cooling system package is for the 1999-2003 540i with the M62TU VAN0S 4.4-liter engine. This package applies to cars equipped with either the manual or automatic transmission (select the appropriate parts in the menu below).

A failure in the cooling system can lead to overheating and catastrophic engine failure. Don't gamble your engine! By replacing these core items preventatively, such as the thermostat housing, radiator, and waterpump, you are defusing what could be a ticking cooling system time bomb. And if you've had a failure of one of these parts, now is the time to refresh your entire cooling system. Our bundled package includes the following:
  • OEM Behr radiator (select for manual or automatic transmission)
  • OEM water pump (choose either the metal or composite impeller)
  • OE BMW coolant temp sensor (located in the water pump housing)
  • OEM Behr thermostat with housing and sensor
  • OEM Behr expansion tank with cap
  • OE BMW upper and lower radiator hoses with expansion tank hose
    Optional items (which can be added below):
    - OE BMW antifreeze
    - Add a new coolant level sensor (known for failing / throwing "check coolant" messages)
    - Replace the heat exchanger coolant lines for the automatic transmission
    - Add a new fan clutch

    Buy as a package and save $$$!

    This cooling system overhaul kit fits the following BMWs:
    1999-2003 E39 BMW 540i
    1999-2001 E38 BMW 740i 740il
  • Packaged by Turner
    Part #: TMS14417
    Price: $424.27 (USD) 
    Ships on Jun 29, 2018
    Water Pump - M50/M52 With Composite Impeller (Original BMW) The early M50/M52 engines had a serious weak point: the water pump. BMW originally used a plastic impeller in the water pump. This would degrade over time and eventually break apart. Your car overheats immediately. This water pump is the latest updated part with a composite impeller. The composite is stronger and lighter than the less-expensive metal impeller version. And it does not suffer from the problems of the early plastic design.

    When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

    This waterpump fits the following BMWs:
    1992-1999 E36 3 series - 323is, 323ic, 325i, 325is, 325ic, 328i, 328ic, M3 3.0 (S50/US), M3 3.2 (S52)
    1991-1995 E34 BMW 525i
    1997-1998 E39 5 series - 528i
    1996-1998 Z3 - Z3 2.8,
    1998-2000 Z3 Roadster/Coupe - M Roadster, M Coupe (S52)
    Genuine BMW
    Part #: 11517527799
    Price: $112.89 (USD) 
    $135.64 (Sale - Save 5%)
    In Stock
    Free Shipping Free Shipping
    Quantity:   
    Water Pump - M52tu, M54 (Original BMW) This Original BMW water pump is the latest updated design with a composite impeller. The composite material (similar to Kevlar) is much stronger than the problematic plastic impeller from past water pumps. And it's lighter than the aftermarket metal impellers so that means less strain on the bearing. For an OE/OEM replacement, we have found that this is the highest quality and longest lasting waterpump available.

    When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

    This waterpump fits the following BMWs:
    1999-2006 E46 3 series - 323i, 323Ci, 328i, 328Ci, 325i, 325Ci, 330i, 330Ci
    1999-2003 E39 5 series - 528i, 525i, 530i
    1999-2002 Z3 Roadster/Coupe - Z3 2.8, Z3 2.5, Z3 3.0
    2004-2006+ X3 SAV - X3 2.5 & 3.0
    2000-2006 X5 SAV - X5 3.0
    2003-2005 Z4 Roadster/Coupe - Z4 2.5 & Z4 3.0
    Genuine BMW
    Part #: 11517509985
    Price: $111.50 (USD) 
    $139.71 (Sale - Save 5%)
    In Stock
    Free Shipping Free Shipping
    Quantity:   
    Water Pump - M50, M52, M52TU, and M54 Engines with Metal Impeller The early M50/M52 engines had a serious weak point: the water pump. BMW originally used a plastic impeller in the waterpump. This would degrade over time and eventually break apart. Your car overheats immediately. This water pump is an updated one with a metal impeller. BMW has since released a water pump with a composte impeller that does not have the same issues and is just as reliable as the metal impeller version. But for piece of mind, the metal impeller is tough to beat.

    Geba builds all of their pumps to exceed factory specifications by using a metal impeller. This offers a huge improvement over stock and a massive increase in reliability. Servicing all major European models, Geba has you covered when it comes time for a new water pump.

    This waterpump fits the following BMWs:
    1999-2006  E46 BMW  323i, 323Ci, 328i, 328Ci, 325i, 325Ci, 325xi, 330i, 330Ci, 330xi
    1997-2003  E39 BMW  528i, 525i, 530i
    2004-2010  E83 BMW  X3 2.5i & 3.0i
    2000-2006  E53 BMW  X5 3.0i
    1997-2002  Z3 BMW  Z3 2.8, Z3 2.5, Z3 3.0, MZ3 (S52)
    2003-2005  E85 BMW  Z4 2.5i & Z4 3.0i
    Geba
    Part #: 11517527910
    Price: $49.95 (USD) 
    In Stock
    Free Shipping Free Shipping
    on orders $99 and up
    Quantity:   
    Complete Cooling System Overhaul Package - 2000-2003 E39 M5 This is a compete cooling system overhaul kit, which includes all the common cooling system failure parts bundled into a complete package. This cooling system package is for the 1999-2003 E39 M5 with the S62 engine.

    A failure in the cooling system can lead to overheating and catastrophic engine failure. Don't gamble your engine! By replacing these core items preventatively, such as the thermostat housing, radiator, and waterpump, you are defusing what could be a ticking cooling system time bomb. And if you've had a failure of one of these parts, now is the time to refresh your entire cooling system. Keep on top of the cooling needs of your engine for your own piece of mind. Potential buyers also see the upside of a properly maintained car with receipts. Our bundled package includes the following:
  • OEM Behr radiator
  • OEM Laso or OE BMW water pump with gasket
  • OE BMW coolant temp sensor (located in the water pump housing)
  • OEM Behr thermostat with o-ring
  • OE BMW o-rings for the inner coolant tubes
  • OE BMW expansion tank cap
  • OE BMW upper and lower radiator hoses with OE-style clamps
  • OE BMW expansion tank hose with OE-style clamps
    Optional items (which can be added below):
    - OE BMW antifreeze
    - Add a new coolant level sensor (known for failing / throwing "check coolant" messages)
    - Add a new plastic expansion tank (if it's never been changed it's a risk of a crack or leak)
    - Add a new fan clutch

    Buy as a package and save $$$!

    This cooling system overhaul kit fits the following BMWs:
    1999-2003 E39 BMW M5
  • Packaged by Turner
    Part #: TMS14418
    Price: $851.77 (USD) 
    Ships in 4 days
    Free Shipping Free Shipping
    Water Pump - E39 540i E38 740i/il E53 X5 4.4i 4.6is Don't take your car's cooling system for granted!One of the biggest weak points is the cooling system. Replacing your water pump will go a long way for keeping your car on the road and operating properly. This water pump fits BMW 1999-2001 E38 740i/740iL, 1999-2003 E39 540i, 1999-2003 E53 X5 4.4i and 4.6is with M62TU 4.4L (4.6L for the 4.6is) engine.

    Choose from a water pump with a metal or composite impeller.
    This water pump comes complete with housing profile gasket and o-rings.

    This item fits the following BMWs:
    1999-2003  E39 BMW  540i 540i touring
    1999-2001  E38 BMW  740i 740il
    2000-2003  E53 BMW  X5 4.4i X5 4.6is
    2000-2003  E52 BMW  Z8 Alpina
    Packaged by Turner
    Part #: 11510393336DK
    Price: $146.90 (USD) 
    Direct Ship