Free Shipping on orders $99 and up! Some exclusions apply. Contiguous US only.

BMW E39 Schrick Performance Camshafts

BMW E39 Schrick Performance Camshafts BMW engines are tuned for top-end power - over 4,500 RPM. If you want to maximize the power available you need to change the camshafts. Schrick is a German performance cam manufacturer renowned for their camshaft tuning and engineering. These are top-of-the-line camshafts from a supplier to some of the world's top automotive brands. AVL-Schrick provides tuning and prototyping to some of the most potent and exclusive performance cars in the world and they have long been the source for BMW performance cams. Installing higher lift/longer duration cams improves engine breathing at higher RPM ranges. By opening the valves faster and for longer periods of time you can let more air in. With the proper fuel and timing you can gain a lot more horsepower. Special tuning and setup is generally required to take advantage of the new dynamics. Schrick cams are direct replacements for the stock cams and usually bolt-in with no additional modification or parts required. In some cases, valvetrain upgrades such as springs and retainers are recommended. Turner Motorsport is a direct Schrick distributor for the North American market. Contact us for all of your Schrick needs!
You're currently viewing parts for your (E39) 5-Series 1996-2003. Reset your chassis
For accurate results, specify your model below.
Schrick Camshaft Set - E46 330, 530, X5 3.0, Z3 3.0 - 264/248 As Used on Project E46 330
Schrick  264   degree (10.5mm lift) intake and  248   degree (10mm lift) exhaust cams provide a power boost at mid-high RPM range without software changes. As used in our 330i ZHP Project Car! These are also available for track / race applications in 272 intake and 256 exhaust durations. We also recommend purchasing  Supertech High Performance Valve Springs   Call us for details. Professional installation required for all Shrick Camshafts.

BMW Schrick Technical Specs Schrick Technical Information / Specs
Schrick
Part #: E46-M54-SCHRICK
Price: $1078.00 (USD) 
Back Ordered, Contact Us
Free Shipping Free Shipping
Quantity:   
Schrick Camshaft Set - E46 323/328 M52TU - 248/248 M52TU Schrick Camshaft Set. 248 degree 10mm lift intake, 248 degree exhaust. Great for street use. Power gains across the board with calm idle. No need for upgraded valve train. Works perfect for 323 / 328!

BMW Schrick Technical Specs Schrick Technical Information / Specs

This item fits the following BMWs:
1999-2000 E46 BMW 323i 323ci 328i 328ci
1999-2000 E39 BMW 528i
1999-2000 Z3 BMW Z3 2.3 Z3 2.8
Schrick
Part #: E46M52TUSCHRICK
Price: $1078.00 (USD) 
Ships on Sep 19, 2018
Free Shipping Free Shipping
Quantity:   
Schrick Camshaft Set - E39 M5, Z8 High-performance cams for the S62 V8 in the E39 M5 and Z8 Roadster. These cams are designed to boost output at higher RPM while keeping low-RPM torque losses to a minimum. This is a set of 4 cams.

BMW Schrick Technical Specs Schrick Technical Information / Specs
Schrick
Part #: 0409A1681-L0set
Price: $2383.80 (USD) 
Ships on Sep 19, 2018
Free Shipping Free Shipping
Quantity:   
Schrick Camshaft Set - E36 M3-spec - 252/244 Degree These Schrick camshafts are the same specs as the stock US S50 cams -
Intake: 252 degree, 10.2mm lift
Exhaust: 244 degree, 9.5mm lift

With original S50/S52 cams in short supply, and a new set running over $2,000 from BMW, you can source new M3-spec cams from Schrick. These are the same specs as the US S50 engine and very close to the stock S52 cams. These make a great upgrade for M50 (325i, 525i) and M52 engines (328i, 528i) with the proper tuning. These bolt in just like the stock and M3 cams with no special hardware upgrades required - use your stock valve springs, lifters, etc. But for reliability we recommend replacing the lifters, valve springs, and retainers with new stock parts on high mileage engines.

Full cam specs: Schrick Technical Information / Specs

This item fits the following BMWs:
1993-1999 E36 BMW 325i 325is 325ic 328i 328is 328ic M3
1993-1995 E34 BMW 525i
1997-1998 E39 BMW 528i
1997-1998 Z3 BMW Z3 2.8
1998-1999 Z3 BMW M Roadster M Coupe
Schrick
Part #: TMS21521
Price: $1119.90 (USD) 
In Stock
Free Shipping Free Shipping
Quantity:   
Schrick Camshaft Set - E36 M3, MZ3, M52 inc 2.8 1995-99 - 256/264

For the US E36 M3. Schrick 264/256 degree camshafts boost mid-high end power for that extra motivation at higher rpm. Low-end torque is not seriously affected due to the M50/M52s VAN0S System. And, higher profile cams work extremely well with an upgraded intake and exhaust. When upgrading the cams there are other areas you must take into consideration. Higher-flow fuel injectors, larger mass-air sensor, and custom programming are strongly recommended. Turner Motorsport sells complete intake & cam packages that boost power to over 290hp. See the Engine section under Camshafts for more info.

 

Cam Specs:
Intake - 264 degree, 11.2mm lift
Exhaust - 256 degree, 10.6mm lift

Schrick Technical Information / Specs

This item fits the following BMWs:
1993-1998 E36 BMW 325i 325is 325ic 328i 328is 328ic M3
1993-1995 E34 BMW 525i
1997-1998 Z3 BMW Z3 2.8
1998-1999 Z3 BMW M Roadster M Coupe

Schrick
Part #: TMS3859
Price: $1169.90 (USD) 
Ships on Aug 2, 2018
Free Shipping Free Shipping
Quantity:   
Schrick Solid Lifter Conversion Kit (convert Hydraulic Lifters To Solid Lifters) One major hurdle for a track-only car is the limitation of the hydraulic valve lifters in the M50, S50-US, M52, S52-US, M52TU, and M54 engines. These effectively limit your revs to 7200-7300 RPM as the valves 'float' at higher revs, leading to piston-valve contact. By converting to a machined solid lifter, and upgrading other areas of the engine, you can configure the valve train to withstand high RPM running. Not only can you tune for more power, you can help prevent damage during a mild mechanical over-rev.

This kit includes the mechanical spacers to convert hydraulic lifter tappets to solid lifters. The lifter bucket remains in place with the Schrick solid tappet replacing the original. These work on all M50, M52, S50, S52 and M54 engines and were proven in normally aspirated as well as supercharged engines. A custom camshaft is required.

Professional installation and setup is mandatory as these require complete assembly of the head, checking valve lash, then dis-assembly and machining of the Schrick tappet to spec. This kit includes enough spacers for 24 valves. We also carry individual parts, if you are looking for single pieces. This price is for a full set of 24.
Schrick
Part #: 086311700KT
Price: $278.40 (USD) 
In Stock
Free Shipping Free Shipping
Quantity:   
Schrick Camshaft Set - E46 330, 530, X5 3.0, Z3 3.0 - 272/256 As Used on Project E46 330
Schrick  272   degree (10.9mm lift) intake and  256   degree (10.4mm lift) exhaust cams provide a power boost at mid-high RPM range without software changes. We also recommend purchasing  Supertech High Performance Valve Springs   Call us for details. Professional installation required for all Shrick Camshafts.

BMW Schrick Technical Specs Schrick Technical Information / Specs
Schrick
Part #: TMS200185
Price: $1350.00 (USD) 
Ships on Sep 19, 2018
Free Shipping Free Shipping
Quantity: