BMW Crankcase Vent, PCV, and Oil Separator Systems for BMW 5 Series E39 (1996-2003)

Clear BMW chassis
Every car has a crankcase vent system that is supposed to suppress oil from making it into the intake ports and combustion chamber. A good functioning system will separate oil from the atmosphere and return it to the oil pan (or collect it in a catch can) while allowing the leftover vapors to burn in the combustion chamber or recirculate through the system. This has always been known as a PCV system (Positive Crankcase Ventilation) but BMW has several other names for it - oil separator, crankcase vent (CCV), and cyclonic separator. Failures in the system will allow raw oil to enter the intake and eventually into the engine itself which can have disastrous effects on engine performance and longevity. As emissions regulations on oil and gas venting have gotten more stringent the PCV systems have gotten more complex and failure prone. And because the CCV is intertwined with other systems you could have rough running, loss of power, higher oil consumption, misfiring, stalling, or other annoying issues. There is no replacement interval for these so we recommend inspecting your crankcase vent system as part of your regular maintenance routines. Symptoms of a bad crankcase vent are: whitish or yellowish film on the underside of the oil cap, whistling/squealing noises (not caused by a belt), suction on the oil cap that makes it hard to unscrew, large amounts of white smoke from the exhaust, and excessive oil consumption.

Turner Baffled Oil Catch Can Kit - 10oz
Turner Baffled Oil Catch Can Kit - 10oz
When we designed this catch we wanted to have the most fu...
Turner Motorsport - Corporate Logo
T#:398786
Part#: 022798TMS01-09KT
In Stock
$189.95
Free Shipping

When we designed this catch we wanted to have the most function options available, the best separation method, and the easiest to service. The Turner engineered catch cans offer a pre-setup design based ion desired flow direction, however this does not limit you to this flow. The inner baffle orientation can be easily adjusted to flow in both directions in case you decide to move this catch can to a different vehicle. A 4 chamber system baffle system inside the catch can was engineered to create multiple changes in the direction of airflow within the separator to cause oil droplets to fall out of suspension before exiting the catch can. Having a closed / recirculated design reduces oil ingestion and promotes cleaner emissions and odor-less operation.

Our catch can was also designed with the idea that the cans fill level can easily be checked with a top mounted dipstick and an optional use bottom drain hole. The drain system comes complete with a valve and hose to be mounted at a lower area of the vehicle so when you're doing an oil change you can drain the catch can.

*Click here for instructions*

Features:

  • 6061-T6 billet machined body, anodized black for lasting protection and appearance
  • Strategically positioned 4 chamber baffle system maximizes oil / air separation
  • Knurled and black anodized oil dipstick makes inspecting oil volume of reservoir clean and simple
  • Sealed with a pre-installed viton O-Ring
  • Includes 2.5mm allen key to remove baffle plates for cleaning
  • Engineered to create multiple changes in the direction of airflow within the separator to cause oil droplets to fall out of suspension before exiting the catch can
  • Closed / recirculated design reduces oil ingestion and promotes cleaner emissions and odor-less operation
  • Optional use drain hole - drain kit included!
  • Universal mounting kit
Turner Baffled Oil Catch Can Kit - 8oz
Turner Baffled Oil Catch Can Kit - 8oz
When we designed this catch we wanted to have the most fu...
Turner Motorsport - Corporate Logo
T#:398784
Part#: 022798TMS01-07KT
In Stock
$189.95
Free Shipping

When we designed this catch we wanted to have the most function options available, the best separation method, and the easiest to service. The Turner engineered catch cans offer a pre-setup design based ion desired flow direction, however this does not limit you to this flow. The inner baffle orientation can be easily adjusted to flow in both directions in case you decide to move this catch can to a different vehicle. A 4 chamber system baffle system inside the catch can was engineered to create multiple changes in the direction of airflow within the separator to cause oil droplets to fall out of suspension before exiting the catch can. Having a closed / recirculated design reduces oil ingestion and promotes cleaner emissions and odor-less operation.

Our catch can was also designed with the idea that the cans fill level can easily be checked with a top mounted dipstick and an optional use bottom drain hole. The drain system comes complete with a valve and hose to be mounted at a lower area of the vehicle so when you're doing an oil change you can drain the catch can.

*Click here for instructions*

Features:

  • 6061-T6 billet machined body, anodized black for lasting protection and appearance
  • Strategically positioned 4 chamber baffle system maximizes oil / air separation
  • Knurled and black anodized oil dipstick makes inspecting oil volume of reservoir clean and simple
  • Sealed with a pre-installed viton O-Ring
  • Includes 2.5mm allen key to remove baffle plates for cleaning
  • Engineered to create multiple changes in the direction of airflow within the separator to cause oil droplets to fall out of suspension before exiting the catch can
  • Closed / recirculated design reduces oil ingestion and promotes cleaner emissions and odor-less operation
  • Optional use drain hole - drain kit included!
  • Universal mounting kit
Turner Baffled Oil Catch Can Kit - 6oz
Turner Baffled Oil Catch Can Kit - 6oz
When we designed this catch we wanted to have the most fu...
Turner Motorsport - Corporate Logo
T#:398782
Part#: 022798TMS01-05KT
In Stock
$189.95
Free Shipping

When we designed this catch we wanted to have the most function options available, the best separation method, and the easiest to service. The Turner engineered catch cans offer a pre-setup design based ion desired flow direction, however this does not limit you to this flow. The inner baffle orientation can be easily adjusted to flow in both directions in case you decide to move this catch can to a different vehicle. A 4 chamber system baffle system inside the catch can was engineered to create multiple changes in the direction of airflow within the separator to cause oil droplets to fall out of suspension before exiting the catch can. Having a closed / recirculated design reduces oil ingestion and promotes cleaner emissions and odor-less operation.

Our catch can was also designed with the idea that the cans fill level can easily be checked with a top mounted dipstick and an optional use bottom drain hole. The drain system comes complete with a valve and hose to be mounted at a lower area of the vehicle so when you're doing an oil change you can drain the catch can.

*Click here for instructions*

Features:

  • 6061-T6 billet machined body, anodized black for lasting protection and appearance
  • Strategically positioned 4 chamber baffle system maximizes oil / air separation
  • Knurled and black anodized oil dipstick makes inspecting oil volume of reservoir clean and simple
  • Sealed with a pre-installed viton O-Ring
  • Includes 2.5mm allen key to remove baffle plates for cleaning
  • Engineered to create multiple changes in the direction of airflow within the separator to cause oil droplets to fall out of suspension before exiting the catch can
  • Closed / recirculated design reduces oil ingestion and promotes cleaner emissions and odor-less operation
  • Optional use drain hole - drain kit included!
  • Universal mounting kit

Crankcase Oil Separator Repair Kit - E46 E39 X5
Crankcase Oil Separator Repair Kit - E46 E39 X5
This Crankcase Vent / Oil Separator Repair Kit includes t...
Packaged by Turner - Corporate Logo
T#:337996
Part#: 11617534237
In Stock
Sale - Save 9% $90.38
Starting at $85.74
Free Shipping on orders $99 and up
Sale - Save 9% $90.38
Starting at $85.74
Free Shipping on orders $99 and up
This Crankcase Vent / Oil Separator Repair Kit includes the updated oil separator valve and hoses. This kit fits E46 323i 323ci 325i (M54 engine) 325ci (M54 engine) 325xi 328i 328ci 330i 330ci 330xi. E39 525i 530i. X5 3.0i.

We also recommend that you replace the oil dipstick guide tube and the hose from the oil separator to the oil dipstick tube as they are often plugged beyond repair.

This item fits the following BMWs:
1999-2005 E46 BMW 323i 323ci 328i 328ci 330i 330ci 330xi
1999-2005 E46 BMW 325i 325ci 325xi - M54 engine only
2001-2003 E39 BMW 525i 530i
2000-2006 E53 BMW X5 3.0i

Crankcase Vent Hose - From Valve Cover to Oil Separator - E36 E39 Z3
Crankcase Vent Hose - From Valve Cover to Oil Separator - E36 E39 Z3...
This Crankcase Vent Hose - From Valve Cover to Oil Separa...
Genuine BMW - Corporate Logo
T#:6690
Part#: 11151703775
In Stock
15% off MSRP $41.50
$35.46
Free Shipping on orders $99 and up
15% off MSRP $41.50
$35.46
Free Shipping on orders $99 and up
This Crankcase Vent Hose - From Valve Cover to Oil Separator fits BMWs with the M52 or S52 6 cylinder engines.
When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

This item fits the following BMWs:
1996-1998 E36 BMW 323is 323ic 328i 328is 328ic M3
1996-1998 E36/7 BMW Z3 2.8
1996-2000 E36/7 BMW M Roadster M Coupe
1997-1998 E39 BMW 525i 528i 530i 540i M5
Genuine BMW Return Pipe - 11617504536 - E46 E39 E53 E60 E83 Z3 Z4 M52 & M54
Genuine BMW Return Pipe - 11617504536 - E46 E39 E53 E60 E83 Z3 Z4 M5...
Part of the vacuum and emissions system that runs from th...
Genuine BMW - Corporate Logo
T#:348236
Part#: 11617504536
In Stock
$39.61
Free Shipping on orders $99 and up

Part of the vacuum and emissions system that runs from the intake manifold back to the connecting hose.
When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

Fits the following BMW's:
E46 M52 (from 01/2000) and M54
E39 M52 (from 01/2000) and M54
E53 M54
E60 M54
E83 M54
Z3 M52 (up to 01/2000 for 2.3L and from 01/2000 for 2.8L) and M54
Z4 M54


Genuine BMW Crankcase Vent Valve - E39 540i - E38 740i 740il 96-01 - E31 840ci 96-98
Genuine BMW Crankcase Vent Valve - E39 540i - E38 740i 740il 96-01 -...
When the crankcase vent valve fails it can cause excessiv...
Genuine BMW - Corporate Logo
T#:2811
Part#: 11617501563K
Ships in 2 Days
$123.09
Free Shipping on orders $99 and up
When the crankcase vent valve fails it can cause excessive oil consumption, engine fault codes and poor idle. This crankcase vent valve ( also know as Oil separator valve or PCV ) fits E39 540i 97-03 E38 740i 96-01 E31 840ci 96-98.

This kit includes the following parts:
1 x 11617501563 - Intake Manifold Rear Cover with Oil Separator Valve
1 X Rear Intake Manifold Gasket

This item fits the following BMWs:
1997-2003 E39 BMW 540i
1996-2001 E38 BMW 740i 740il
1996-1998 E31 BMW 840ci
Genuine BMW Crankcase Vent Valve - E36 E39 Z3
Genuine BMW Crankcase Vent Valve - E36 E39 Z3
When doing any sort of repair or maintenance there is no ... For vehicles with production date up to 09/1998
Genuine BMW - Corporate Logo
T#:337967
Part#: 11151703484
Ships in 2 Days
Sale - Save 13% $126.20
Starting at $109.84
Free Shipping on orders $99 and up
Sale - Save 13% $126.20
Starting at $109.84
Free Shipping on orders $99 and up

When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

OEM BMW crank case vent valve part number: 11151703484.


Elring Crank Case Vent Valve Gasket - M60 M62
Elring Crank Case Vent Valve Gasket - M60 M62
This gasket seals the PCV valve to the valve cover. If th...
Elring - Corporate Logo
T#:362757
Part#: 11611729728
In Stock
$2.95
Free Shipping on orders $99 and up

This gasket seals the PCV valve to the valve cover. If this leaks, you maybe experience poor running conditions or check engine lights. Replace your leaking seal with a new Elring gasket to ensure long lasting reliability.

Elring is one of the biggest OEM names in the manufacturing of high quality gaskets that are available for very affordable prices. Elring has supplied many automotive names for years with the gaskets that seal your car's components from day 1 so you can rest assured that these components will last for a long time to come!

Fits the following BMW engines:
M60 3.0L 4.0L
M62 4.4L


Crankcase Vent Return Hose - E46 E39 E60 Z3
Crankcase Vent Return Hose - E46 E39 E60 Z3
This is the BMW crankcase return line that goes from the ...
Febi - Corporate Logo
T#:12449
Part#: 11617504536
In Stock
$21.95
Free Shipping on orders $99 and up

This is the BMW crankcase return line that goes from the intake manifold to the top CCV connecting hose. We also offer a complete CCV repair kit
Since the late 1800aEURtms Febi has been fabricating replacement metal parts. This history is self evident in the quality and vast amount of applications they service. With more than 34,000 repair solutions for cars and commercial vehicles you can be sure Febi has you covered.


This item fits the following BMWs:
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
1997-2003 E39 BMW 525i 528i 530i
2004-2010 E60 BMW 525i 530i
2004-2005 E83 BMW X3 2.5i X3 3.0i X3 3.0si
2000-2006 E53 BMW X5 3.0i
1/2000-2002 Z3 BMW Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i
2003-2005 E85 BMW Z4 2.5i Z4 3.0i

Crankcase Oil Separator Valve - E46 E39 E60 X3 X5 Z3 Z4
Crankcase Oil Separator Valve - E46 E39 E60 X3 X5 Z3 Z4
This Crankcase Oil Separator Valve fits BMWs with the M52...
Febi - Corporate Logo
T#:2855
Part#: 11617501566
In Stock
$36.95
Free Shipping on orders $99 and up
This Crankcase Oil Separator Valve fits BMWs with the M52tu or M54 6 cylinder engine including E46 323i 325i 328i 330i E39 525i 528i 530i E60 525i 530i X3 2.5i 3.0i X5 3.0i Z3 2.5 2.8 3.0i Z4 2.5i 3.0i. It is fairly common for this valve to become plugged with sludge which can create rough idle and excessive oil consumption.
Since the late 1800aEURtms Febi has been fabricating replacement metal parts. This history is self evident in the quality and vast amount of applications they service. With more than 34,000 repair solutions for cars and commercial vehicles you can be sure Febi has you covered.

This item fits the following BMWs:
1999-2005 E46 BMW 323i 323ci 328i 328ci 330i 330ci 330xi
1999-2005 E46 BMW 325i 325ci 325xi - only with M54 engine
1999-2003 E39 BMW 525i 528i 530i
2004-2005 E60 BMW 525i 525xi 530i 530xi
2004-2006 E83 BMW X3 2.5i X3 3.0i
2000-2006 E53 BMW X5 3.0i
1999-2002 Z3 BMW Z3 2.3 Z3 2.5i Z3 2.8i Z3 3.0i
2003-2006 E85 BMW Z4 2.5i Z4 3.0i
Hose - From Oil Separator to Oil Dipstick Tube - E46 E39
Hose - From Oil Separator to Oil Dipstick Tube - E46 E39
This is the updated hose that goes from the Crankcase Oil...
Rein - Corporate Logo
T#:2879
Part#: 11157532629
In Stock
$11.95
Free Shipping on orders $99 and up
This is the updated hose that goes from the Crankcase Oil Separator Valve to the oil dipstick tube. This tube tends to get plugged with oil sludge and becomes brittle and cracks. It fits E46 323i 323ci 325i (M54) 325ci (M54) 325xi 328i 328ci 330i 330ci 330xi - E39 525i 530i - E60 525i 530i 2004-2005 - X3 2.5i 3.0i 2004-2006 - Z3 2.5i 3.0i - Z4 2.5i 3.0i 2003-2006.
In german, Rein means Pure. In the automotive industry the Rein name has quickly come to represent quality. With fitments for some of the worldaEURtms finest automobiles including BMW and Mini and guaranteed OE quality, Rein is a name you can trust.

This item fits the following BMWs:
2001-2005 E46 BMW 325i 325ci 325xi Only for cars with M54 engine
1999-2005 E46 BMW 323i 323ci 328i 328ci 330i 330ci 330xi
2001-2003 E39 BMW 525i 530i
2004-2005 E60 BMW 525i 525xi 530i 530xi
2004-2006 E83 BMW X3 2.5i X3 3.0i
2001-2002 Z3 BMW Z3 2.5i Z3 3.0i
2003-2005 Z4 BMW Z4 2.5i Z4 3.0i


Crankcase Vent Hose - From Valve Cover to Oil Separator  - E46 E39 E60 X3 X5 Z3 Z4
Crankcase Vent Hose - From Valve Cover to Oil Separator - E46 E39 E...
This Crankcase Vent Hose - From Valve Cover to Oil Separa...
URO - Corporate Logo
T#:2853
Part#: 11611432559
Ships on Mar 5, 2019
$17.95
Free Shipping on orders $99 and up
This Crankcase Vent Hose - From Valve Cover to Oil Separator fits BMWs with the M52 or M54 6 cylinder engine including E46 323i 325i 328i 330i E39 525i 528i 530i E60 525i 530i X3 2.5i 3.0i X5 3.0i Z3 2.5 2.8 3.0i Z4 2.5i 3.0i.

This item fits the following BMWs:
1999-2005 E46 BMW 323i 323ci 328i 328ci 330i 330ci 330xi
1999-2005 E46 BMW 325i 325ci 325xi - only with M54 engine
1999-2003 E39 BMW 528i 528i 530i
2004-2005 E60 BMW 525i 525xi 530i 530xi
2004-2006 E83 BMW X3 2.5i X3 3.0i
2000-2006 E53 BMW X5 3.0i
1999-2002 Z3 BMW Z3 2.3 Z3 2.5i Z3 2.8i Z3 3.0i
2003-2006 E85 BMW Z4 2.5i Z4 3.0i
Crankcase Ventilation Dipstick Hose
Crankcase Ventilation Dipstick Hose
This tube runs from the oil separator to the lower dipsti...
URO - Corporate Logo
T#:359570
Part#: 11157532629
Ships on Mar 5, 2019
$8.95
Free Shipping on orders $99 and up

This tube runs from the oil separator to the lower dipstick tube.

BMW has an ongoing issue with oil separators freezing in cold weather if driving is done before the vehicle is fully warmed up. There is often a howling noise followed by numerous oil leaks. The crankcase breather valve is used to purge the oil vapor from the engine block into the valve cover. However, sometimes condensation can cause it to freeze, causing the entire oil separator system to fail, crack, and disintegrate.

Replace this and all the other components of the oil separator system to prevent damage to all the aspects of your engine. As long as you have everything off, you can rest assured that new parts will last and be reliable.

Select Vehicle

Category

  • Crankcase Vent, PCV, and Oil Separator Systems

Price

$
$

Special Offers

Shipping