Free Shipping on orders $99 and up! Some exclusions apply. Contiguous US only.

BMW E46 M3 Sway Bar Kits

BMW E46 M3 Sway Bar Kits The next step in tuning your car's handling - after shocks/springs and camber plates - should be a set of swaybars. Using larger front and rear sway bars will give your car better/quicker turn-in and less bodyroll in corners. These bars replace the existing sway bars on the car for a clean and simple upgrade with very little downside. Sway bars should be matched with your springs/shocks to maintain a proper handling balance. In some cases only a front or rear bar is needed to positively change the balance and make the car more neutral. We sell sway bar kits from H&R, Racing Dynamics, OE BMW upgrades, and even some of our own designs. Swaybars are sold with new bushings. New links and other hardware are strongly recommended.
You're currently viewing parts for your (E46) M3 2001-2006. Reset your chassis
For accurate results, specify your model below.
H&R Rear Sway Bar - E46 M3 - 25mm Adjustable H&R adjustable 25mm rear sway bar / swaybar for all 2001-2006 E46 M3 coupe and convertible. Includes bushings. Made in Germany.

  • Reduces body roll
  • Highest tensile strength available

    H&R Sport Sway Bars are designed for drivers who desire improved handling without lowering or affecting ride quality. H&R Sport Sway Bars increase your suspension’s roll stiffness—or its resistance to roll in turns—while maintaining ride comfort and dramatically increasing cornering control, lateral stability, and grip. A unique feature of H&R Sport Sway Bars are the smooth, machined-like forged ends that, for specific vehicles, allow for adjustability in stiffness—giving you an unmatched level of precision and performance.

    This item fits the following BMWs:
    2001-2006 E46 BMW M3
  • H&R
    Part #: 71414
    Price: $262.95 (USD) 
    Direct Ship
    Free Shipping Free Shipping
    Quantity:   
    E46 M3 Turner Motorsport Front/Rear 30/25 Sway Bar Upgrade As Used on Project E46 M3
    The Turner Motorsport sway bar / swaybars for the E46 M3 were designed to provide better overall balance and performance than the stock anti-roll bars. With these bars you can greatly reduce bodyroll and decrease the understeering effects of a staggered wheel setup. They are adjustable in the front (3-position) and the rear (2-position) to fine tune the handling for both the street and the track. The Turner bars are sized at 30mm in the front and 25mm in the rear (+4 and +3.5mm from stock, respectively). We supply them with a urethane bushing with a reinforced inner core that requires no lubrication or maintenance so you won?t have to put up with annoying squeaks and annual greasing work. These bars are crafted from a special spring steel that is both stronger and more resilient than competitive sway bars. They have been shot peened and heat treated, and feature precision forged ends. We feel that these are the best bars on the market for the E46 M3 - we have used these on our race-winning M3s in the Koni Challenge and SCCA T2 classes.

    Fitment
    These bars fit in the stock locations using the original brackets and links. Our bar has been designed to use the stock M3 front sway bar links. Adjustable links are not required but recommended if the car is lowered or if you have coil overs. The rear hardware has been upgraded in our kit to a M10 sized bolt and it can be a little tricky to install on the factory end link. Contact us if you would like to have new links included with the hardware pre-installed. To avoid pre-loading the bar, it is best to leave one side un-done until the car is lowered to the ground. Never connect both links to the same bar with the car off the ground.

    Do I need adjustable sway bar links?
    The adjustable sway bar links ensure that there is no pre-load on the bar and that the bar has the correct clearance to other suspension components. Pre-load is when the bar is slightly stressed when it's on the car. If you have to force the links to fit the bar because it has tension then you have pre-load. Adjustable links fix all of that because you can then shorten or lengthen the link to match the installation of the bar. If you have coil overs or the car is very low, you should definitely have the adjustable links because these conditions may contribute to the pre-load situation. Adjustable front or rear links can be added from the options listed below.

    Setup
    The bars are adjustable so any driver can find an ideal setup for the type of driving they are doing. The sway bar becomes stiffer in the holes furthest from the end of the bar. The holes at the very end of the bar are the softest setting. We would generally recommend starting out with the front bar set to the stiffer setting and the rear bar positioned in the soft setting. Adjust to your liking from there.

    Click Here for Independent Reviews of this Kit!

    This item fits the following BMWs:
    2001-2006 E46 BMW M3
    Turner Motorsport
    Part #: 33355TMS
    Price: $399.95 (USD) 
    Ships on Jun 26, 2018
    Free Shipping Free Shipping
    E46 M3 Turner Front Sway Bar - 30mm

    3 way adjustable 30mm front sway bar / swaybar for E46 M3. Includes bushings.

    • Reduces body roll
    • Improves steering turn-in and handling

    Sway bars are typically sold as a front and rear set to balance the handling. But a front sway bar only can also have excellent benefits, especially on a street car. Going with a larger front bar will improve steering and handling even at low-moderate speeds. Steering turn-in is faster and gives the car a more direct and responsive feel. Cars with staggered wheel fitments (a narrower front wheel compared to the rear) will especially benefit from this and help the front tire 'bite' into the road.

    We use an adjustable 30mm sway bar that has been fine-tuned for use on the E46 M3. Urethane bushings with a reinforced inner core that requires no lubrication are included. These bars are crafted from a special spring steel that is both stronger and more resilient than competitive sway bars. They have been shot peened and heat treated, and feature precision forged ends.

    This item fits the following BMWs:
    2001-2006 E46 BMW M3

    Turner Motorsport
    Part #: E46M3-F30-SWAY
    Price: $272.95 (USD) 
    In Stock
    Quantity:   
    H&R Front Sway Bar - E46 M3 3 way adjustable 30mm front sway bar / swaybar for 2001-2006 E46 M3. Includes bushings.

  • Reduces body roll
  • Highest tensile strength available

    H&R Sport Sway Bars are designed for drivers who desire improved handling without lowering or affecting ride quality. H&R Sport Sway Bars increase your suspension’s roll stiffness—or its resistance to roll in turns—while maintaining ride comfort and dramatically increasing cornering control, lateral stability, and grip. A unique feature of H&R Sport Sway Bars are the smooth, machined-like forged ends that, for specific vehicles, allow for adjustability in stiffness—giving you an unmatched level of precision and performance.

    This item fits the following BMWs:
    2001-2006 E46 BMW M3
  • H&R
    Part #: 70414
    Price: $278.95 (USD) 
    In Stock
    Free Shipping Free Shipping
    Quantity:   
  • 22 years of BMW Tuning.
  • Award winning service.
  • 10,000's of parts in stock.
  • Quality BMW Parts only.
  • Hassle-free returns.

  • Find us on Facebook