Free Shipping on orders $99 and up! Some exclusions apply. Contiguous US only.

BMW E46 M3 Sway Bar Links & Sway Bar Parts

BMW E46 M3 Sway Bar Links & Sway Bar Parts Worn or failed sway bar links can lead to clunks, thunks in your suspension -- or WORSE, they can cause an upset in your BMW's handling. We carry both stock and upgraded swaybar links for BMW's, so whether you are replacing a broken stock sway bar link or looking for upgraded swaybar end links for track or racing purposes, this section is where you'll find our sway bar links and parts.
You're currently viewing parts for your (E46) M3 2001-2006. Reset your chassis
For accurate results, specify your model below.
Front Sway Bar Link - E46, Z4 This is the standard front sway bar / swaybar link for BMW E46 and E85 Z4. It connects the sway bar to the strut. If you hear front end noise when going over bumps while turning we recommend you check these. Alternate BMW Part#31356780847 Sold individually

We also offer an upgraded link from Meyle with heavy duty ball joints for additional durability. See options below.

This item fits the following BMWs:
1999-2005 E46 BMW 323i 323ci 325i 325ci 328i 328ci 330i 330ci M3 - Sorry not for Xi Models!
2003-2008 Z4 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
Packaged by Turner
Part #: 31351095694
Price: $29.66 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Sway Bar Bushing Bracket (Steel)

Replacement steel sway bar bushing bracket (Genuine BMW). This bracket is mostly used on the rear sway bar but also on the front of some cars.

FRONT sway bar bracket applications -
1982-1988 E28 BMW 528e 533i 535i
1983-1989 E24 BMW 633CSi 635CSi

REAR sway bar bracket applications -
1992-1999 E36 BMW 318i 318is 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2006 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
1989-1995 E34 BMW 525i 530i 535i 540i M5
1988-1994 E32 BMW 735i 735iL 740i 740iL 750iL
1995-2003 E38 BMW 740i 740iL 750iL
1996-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Coupe M Roadster
2002-2008 E85 E86 BMW Z4 2.5 Z4 3.0 Z4 3.0i Z4 3.0si

Genuine BMW
Part #: 33506779734
Price: $4.62 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Adjustable Sway Bar Link (Single) - E30 M3, E36 M3, E46, Z4 This single swaybar link is adjustable to eliminate preload on the front sway bar in E30 M3, E36 M3, E46, and Z4 models. Preload is tension on the bar when the car is at rest on the ground. Ideally, the bar should be neutral with zero tension on both ends (no twist in the bar at rest). Preload comes from inconsistent side-side ride height (such as with coil overs), a bent swaybar, a bent strut housing, or a chassis with bent or skewed frame rails. The handling is affected with a preloaded sway bar so removing that tension will give you more consistent handling and response. Preloading can also lead to premature failure of the link ball joints.

To remove preload you only need an adjustable link on one side of the car. Install your stock swaybar link on one side, lower the car to the ground, adjust the Turner link to meet the swaybar hole on the other side, and tighten everything up. Never install both sway bar links with the tires off the ground. Our link is made from a stock HD swaybar link with an easily adjusted hex rod in the middle.

One link or two? Technically, the remove preload only one link is required. However, there may be cases where having two links is better. Having an adjustable link on both sides of the car will allow you to better position the front sway bar for clearance or when a different racing style coil over is used.

This item fits the following BMWs:
1988-1991 E30 BMW M3
1995-1999 E36 BMW M3
1999-2006 E46 BMW 323i 323ci 325i 325ci 328i 328ci 330i 330ci M3
1982-1988 E28 BMW 524td 528e 533i 535i 535is M5
1989-1995 E34 BMW 525i 530i 535i 540i M5
1982-1989 E24 BMW 633csi 635csi M6
2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
Turner Motorsport
Part #: 31351134582A
Price: $99.95 (USD) 
In Stock
Free Shipping Free Shipping
Genuine BMW CSL Front Sway Bar Bushing - E46 BMW Fits all E46 BMW's that have been upgraded to the 30.8mm front CSL sway bar.
Genuine European BMW
Part #: 31352282656
Price: $20.70 (USD) 
$28.00
Limited Qty Sale
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Rear Sway Bar Link - E46 M3 - Z4 2.5 3.0i 3.0si M Roadster M Coupe This is the stock rear sway bar / swaybar link. Alternate part number 33552283743.

This item fits the following BMWs:
2001-2006 E46 BMW M3
2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster Z4 M Coupe
2009+ Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
Lemforder
Part #: 33552282182
Price: $18.95 (USD) 
Ships in 2 Days
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Turner E46 M3 30mm Front Sway Bar Bushing (Each)

Replacement front sway bar bushing for the Turner E46 M3 30mm front sway bar.

Fits only with the Turner 30mm front sway bar - not a stock sway bar.

Turner Motorsport
Part #: 53110036
Price: $29.95 (USD) 
Direct Ship
Quantity:   
Meyle Heavy Duty Front Sway Bar End Link - E46 RWD, Z4

Sway bar end links connect the swaybar to the rest of the suspension, preventing body roll and keeping everything in line in tight turns. This exposes these links to a high amount of stress and pressure, often leading to split bushings and sloppy body control and knocking noises. Meyle HD sway bar links are the perfect option to restore body control and eliminate knocking noises.

Meyle is a German brand in business since 1958 and all of their products are TUV approved and meet or exceed ISO standards. Heavy Duty components are designed to provide significantly long lifespans than other aftermarket and stock OE components. Each part includes a 4 year warranty.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Features:

  • 4 Year Warranty

  • All metal ball joints are more reliable and longer lasting than stock

  • Bushings are solid rubber rather than fluid filled, providing longevity and handling feel improvements

Fits the following BMWs:
2000-2006 E46 BMW RWD
2002-2008 Z4 BMW all sub-models

Meyle HD
Part #: 31351095694
Price: $19.99 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Turner Motorsport Custom Length Adjustable Front Sway Bar End Links (Pair)

Our renowned TMS adjustable front sway bar / swaybar links for BMWs are now available in custom lengths, making them easy to order for any aftermarket or custom suspension setups. Simply measure for your ideal link length, and order the links with the best length range (below). Each sway bar link has a 10mm diameter mounting pin/stud, which is the typical factory/stock size for a universal fitment. These are sold by the pair, and each set includes two matching sway bar end links.

These end links offer the quiet operation and long life of "stock" BMW end links, but with the strength and adjustability of rod-end style sway bar links. These sway bar links can be used on a wide variety of BMWs and aftermarket BMW suspensions. When measuring, please consider that the length ranges of our Custom Adjustable end links are measured from the center to center on the end link mounting stud / pin, as shown in our diagram.

Note for E9X M3: the unique mounting on the M3 strut requires a set of our adapter seats (#TSU9912AF9). You can add them with your links from the menu below.
 

TMS Part#Center to Center (mm)Center to Center (inch)

TSU9912A35155.00mm - 170.00mm6.10" - 6.69"

TSU9912A40170.00mm - 185.00mm6.69" - 7.28"

TSU9912A45180.00mm - 195.00mm7.08" - 7.67"

TSU9912A50190.00mm - 205.00mm7.48" - 8.07"

TSU9912A55207.00mm - 222.00mm8.15" - 8.74"

TSU9912AF1220.00mm - 235.00mm8.66" - 9.25"

TSU9912A70240.00mm - 255.00mm9.45" - 10.04"

TSU4612AF3250.00mm - 265.00mm9.84" - 10.43"

TSU9912A80261.00mm - 276.00mm10.28" - 10.87"

TSU5012AF8280.00mm - 295.00mm11.02" - 11.61"

TSU9912A95290.00mm - 305.00mm11.42" - 12.00"

TSU9912110320.00mm - 335.00mm12.59" - 13.19"

TSU9912115330.00mm - 345.00mm12.99" - 13.58"

TSU9912130362.00mm - 377.00mm14.25" - 14.84"

TSU9912135370.00mm - 385.00mm14.57" - 15.16"

TSU9912140381.00mm - 396.00mm15.00" - 15.60"

TSU9912145389.00mm - 404.00mm15.31" - 15.91"


Please select your length below. 

Turner Motorsport
Part #: TMS2104
Price: $159.95 (USD) 
In Stock
Free Shipping Free Shipping
CATuned 180mm Front Adjustable Sway Bar Links - Pair - E28, E30, E34, E36, E39, E46, E9X, MZ3, Z4

CATuned includes these adjustable front sway bar links in many of their coilover kits. Utlilizing low-friction ball joints with superior articulation, they're supremely durable and designed to help you clock your sway bars correctly depending on ride height.

 

 

CATuned
Part #: FRT180LNK
Price: $115.00 (USD) 
In Stock
Quantity:   
E36/E46 Turner Rear Sway Bar Link Bolt This is the bolt that goes through the rear sway bar link on E36/E46 Turner rear sway bars. It's a special bolt with a longer shank to fit through the link. Sold each.
Turner Motorsport
Part #: 116001-95
Price: $5.00 (USD) 
Direct Ship
Quantity:   
E36/E46 Rear Adjustable Length Sway Bar End Links (Pair)

These adjustable rear links are only required when using sway bar / swaybars with a suspension with a very low ride height, where it may be necessary to adjust the length of the end links for proper sway bar clearance from the drive axles or other suspension components. These suspensions are usually found only on race cars but this may also apply to street cars with sport springs/sport coil overs that are lowered a lot. On most street cars lowered 1.5" or less, the stock links will be fine.

These end links feature a Heim joint, which allows enough lateral movement when disconnected to adjust the length of the link without removing the entire link from the car. This is particularly helpful when eliminating or adjusting preload while tuning the suspension. Similar links without this joint, can't be adjusted without totally removing the link from the car.

Built-in grease fittings allow for occasional lube, and a packet of grease is included. These links are sold as a set, and include two end links and hardware for H&R and TMS sway bars (other brands may not need the hardware). 

At their shortest setting they are 2.875" hole to hole and on their longest setting they are 3.5" hole to hole.

*Note: these links will not work with factory or non-adjustable Eibach sway bars.

Turner Motorsport
Part #: TSU9913RS2
Price: $119.95 (USD) 
Ships Today
Free Shipping Free Shipping
Quantity:   
H&R Swaybar Bushing - 25mm - E46 M3 H&R sway bar bushings feature a special urethane/Teflon composite that prevents squeaks and eliminates the need for lubrication. No mess, no maintenance, a perfect fit.

Sold individually

This item fits the following BMWs:
2001-2006 E46 BMW M3
H&R
Part #: 71414-RBUSH
Price: $24.95 (USD) 
Direct Ship
Quantity:   
OEM Lemforder Front Sway Bar Link - E46, Z4

This is the standard front sway bar / swaybar link for BMW E46 and E85 Z4. It connects the sway bar to the strut. If you hear front end noise when going over bumps while turning we recommend you check these. Alternate BMW Part#31356780847 Sold individually

Sway bar end links connect the swaybar to the rest of the suspension, preventing body roll and keeping everything in line in tight turns. This exposes these links to a high amount of stress and pressure, often leading to split bushings and sloppy body control and knocking noises. OEM Lemförder sway bar links are the perfect option to restore body control and eliminate knocking noises.

OEM Lemförder is an engineering company that focuses on high-quality, precision manufacturing of critical suspension and steering components. Providing exceptionally high quality parts directly to BMW, as well as 50+ other big name automotive companies, such as Mercedes and Audi, their history of reliability and variety of offered parts makes them one of the biggest names for a go-to OEM parts provider. Lemförder parts place an important emphasis on design, production, and assembly, ensuring maximum reliability. They even coat all parts possible with corrosion protection for extended longevity.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!


This item fits the following BMWs:
1999-2005 E46 BMW 323i 323ci 325i 325ci 328i 328ci 330i 330ci M3 - Sorry not for Xi Models!
2003-2008 Z4 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe

Lemforder
Part #: 31351095694
Price: $29.66 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
H&R Swaybar Bushing - 30mm - E46 M3 H&R sway bar bushings feature a special urethane/Teflon composite that prevents squeaks and eliminates the need for lubrication. No mess, no maintenance, a perfect fit.

Sold individually

This item fits the following BMWs:
2001-2006 E46 BMW M3
H&R
Part #: 70414-BUSH
Price: $24.95 (USD) 
Direct Ship
Quantity:   
E28, E30, E34, E36, E39, E46, E9X, MZ3, Z4 Turner Motorsport Adjustable Front Sway Bar End Links (Pair)

You get the best of both worlds with this pair of Turner Motorsport adjustable sway bar links. We searched far and wide to find the hidden gem of swaybar links. You get the same quiet operation and long life as the stock links plus the strength and adjustability of rod-end style sway bar links.

With the wide range of suspensions and sway bars available today adjustable sway bar links can help you with many problems. Along with the ability to remove preload you can change the length to maximize sway bar geometry. Example: if the sway bar hoop comes too close to the steering rack, oil cooler, or under tray in its suspension travel you can adjust it by simply lengthening or shorting the adjustment rod. In some cases you may need a longer or shorter adjustment rod to achieve optimal geometry. We also offer these same links in other custom lengths (click here) that may not be specific to BMW chassis.

Features:

  • Adjustable to neutralize preload on sway bar (balanced handling)
  • The ability to set sway bar geometry and clearance
  • Low friction ball joints
  • High articulation
  • Direct replacement for OEM sway bar links
  • Watertight boot seal
  • Ball joint is made by a world leader in ball joint technology, THK. THK's OEM Customers: BMW, Porsche, Ford, GM, Nissan, Honda, and Toyota

Turner Swaybar Link Specs:
TSU9912AF1: 220.00mm - 235.00mm / 8.66" - 9.25"
TSU4612AF3: 250.00mm - 265.00mm / 9.84" - 10.43"
TSU5012AF8: 280.00mm - 295.00mm / 11.02" - 11.61"
TSU9912A95: 290.00mm - 305.00mm / 11.42" - 12.00"

These adjustable sway bar end links can be used on a variety of BMWs. Please select your car below. Please note these end links do not fit non-M E36, except 325i/is produced before 6/1992.

Turner Motorsport
Part #: TMS339009
Price: $159.95 (USD) 
In Stock
Free Shipping Free Shipping
OEM Lemforder Rear Sway Bar End Link - E46 M3, Z4

Sway bar end links connect the swaybar to the rest of the suspension, preventing body roll and keeping everything in line in tight turns. This exposes these links to a high amount of stress and pressure, often leading to split bushings and sloppy body control and knocking noises. OEM Lemförder sway bar links are the perfect option to restore body control and eliminate knocking noises.

OEM Lemförder is an engineering company that focuses on high-quality, precision manufacturing of critical suspension and steering components. Providing exceptionally high quality parts directly to BMW, as well as 50+ other big name automotive companies, such as Mercedes and Audi, their history of reliability and variety of offered parts makes them one of the biggest names for a go-to OEM parts provider. Lemförder parts place an important emphasis on design, production, and assembly, ensuring maximum reliability. They even coat all parts possible with corrosion protection for extended longevity.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Lemforder
Part #: 33552283743
Price: $13.69 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
  • 22 years of BMW Tuning.
  • Award winning service.
  • 10,000's of parts in stock.
  • Quality BMW Parts only.
  • Hassle-free returns.

  • Find us on Facebook