click to Chat Live
Contact YouTube Blog Twitter facebook Turner Motorsport on Instagram
1-800-280-6966
 |   Login
  • 0
 |   Login
Shopping Cart (0) Wishlist
Contact

(0) item(s) in your Shopping Cart
Home
Categories
Specials Gifts & Clothing
  1. Genuine BMW Accessories
  2. Genuine BMW Clothing
  3. Turner Shirts Hats and Gear
  4. Gifts under $25
  5. Gifts under $50
  6. Gifts under $100
  7. Gifts over $100
  8. Gift Certificates
  9. Stocking Stuffers
  10. Gift Packages
Brakes
  1. Brake Overhaul Packages
  2. Brake Pads
  3. Brake Pad Sensors
  4. Brake Rotors
  5. StopTech Big Brake Kits
  6. Brembo Big Brake Kits
  7. Stainless Steel Brake Lines
  8. Brake Fluid
  9. Brake Calipers
  10. Caliper Rebuild Kits
  11. Parking Brake Parts
  12. Brake Master Cylinders
  13. ABS/DSC System Parts
  14. Brake Cooling Ducts & Backing Plates
  15. Brake Pads - Brembo GT BBK Calipers
  16. Brake Pads - StopTech BBK Calipers
Car Care & Accessories
  1. Car Covers
  2. Wheel & Tire Cleaning
  3. Wax, Polish and Cleaning Supplies
  4. Detailing Gear
  5. Leather & Plastic Care
  6. Car Cleaning Supplies
  7. Chassis Paint, Coatings, Sealants, and Rust Conversion
Drivetrain
  1. Differential and Gearing Upgrades
  2. Differential Mounts and Upgrades
  3. OEM Clutch Kits & Clutch Parts
  4. Performance Clutch Kits & Parts
  5. Lightweight Aluminum Flywheel Upgrades
  6. Stock OEM Dual Mass Flywheels
  7. Stainless Steel Clutch Lines
  8. Clutch Parts
  9. UUC Short Shift Kits
  10. Axle Shafts
  11. Driveshafts
  12. B&M Short Shifters
  13. Performance Short Shift Kits
  14. UUC DSSR - Double Sheer Selector Rod
  15. Drivershaft Center Support Bearings
  16. Flex Discs & Guibos
  17. Transmission Mounts
  18. Transmission Parts
Engine Chips
  1. Shark Injector Performance Software, 1996-2005 Models
  2. Sprint Booster Drive-by-Wire Module
  3. Stand-Alone Engine Management
Engine Parts
  1. Engine Performance Packages
  2. Water Pumps
  3. Thermostats
  4. Radiators & Cooling System Overhaul Kits
  5. Radiator Hoses, Cooling Hoses, & Hose Sets
  6. Engine Fans & Fan Clutches
  7. Underdrive Power Pulleys
  8. Schrick Performance Camshafts
  9. External Engine Parts
  10. Drive Belts & V-Belts
  11. Gaskets, Gasket Sets, Seals, & O-Rings
  12. Crankcase Vent, PCV, and Oil Separator Systems
  13. Motor Mounts
  14. Electrical Sensors, Switches, & Relays
  15. Ignition Parts
  16. Alternator & Alternator Parts
  17. Starter Motors & Starter Parts
  18. Fuel System Parts
  19. Internal Engine Parts
  20. Cylinder Head Parts & Head Bolts
  21. VANOS Units & Parts
  22. Rod Bearing Kits
  23. Oil Coolers & Oil Cooler Parts
Exhaust
  1. Supersprint Performance Exhaust Systems
  2. Performance Headers & Downpipes
  3. Borla Performance Exhaust Systems
  4. Corsa Performance Exhaust Systems
  5. Dinan Free Flow Exhaust Systems
  6. Performance Exhaust Systems
  7. OEM Replacement Mufflers and Exhaust Systems
  8. Exhaust System Upgrades
  9. Catalytic Converters
  10. Oxygen Sensor - O2 Sensors
  11. Exhaust Gaskets Hangers and Parts
Exterior / Body
  1. Black Grills
  2. Chrome Grills & Trim
  3. Emblems & Decals for Hood, Trunk, and Wheels
  4. Painted Reflectors
  5. Front Spoilers, Bumper Covers, & Air Dams
  6. Rear Spoilers, Rear Wings, & Aprons
  7. Body Trim Parts & Accessories
  8. Hood & Trunk Shocks, Struts
  9. License Plate Brackets & License Plate Frames
  10. Mirror Kits & Mirror Parts
  11. Window Regulators & Motors
  12. Wiper Blades, Wiper Pumps, & Wiper Motor Parts
  13. Hood Pins and AeroCatch Latches
  14. Racing Tow Hooks and Tow Straps
  15. Aero & Body Kits
Intake
  1. aFe Cold-Air Intake Kits
  2. Turbos & Active Autowerke Superchargers
  3. Gruppe M Cold-Air Intake Kits
  4. Performance Intake Kits
  5. aFe Performance Air Filters
  6. K&N Performance Air Filters
  7. Intake Cleaning & Recharging Kits
  8. Intake Manifold Components (DISA, Vacuum, CCV, Etc)
  9. Mass Air Sensor & Air Flow Meters
  10. Intake Boots & Hoses
  11. Throttle Body Parts
Interior
  1. Floor Mats
  2. Gauge Kits and Data Acquisition
  3. Auxiliary Input Adaptors for BMW
  4. Pedal Sets
  5. Escort Radar Detectors
  6. Factory Steering Wheels
  7. Racing Steering Wheels
  8. Shift Knobs, Shift Boots, & Shift Handles
  9. Seats & Seat Accessories
  10. Seat Belts and Racing Harnesses
  11. Cup Holders and Storage
  12. Carbon Fiber Interior Parts
  13. Door Sill Strips
  14. Heating & Air Conditioning
  15. Interior Switches and Switchgear
  16. Sunshades & Windscreens
  17. Interior Trim & Accessories
Lighting
  1. Euro Clear Turn Signals, Parking Lights, & Tail Lights
  2. Turn Signals / Parking Lights
  3. Bulbs for Headlights, Turn Signals and Tail Lights
  4. Headlights, Headlight Lenses, & Headlight Parts
  5. Fog Lights, Fog Light Lenses, & Fog Light Parts
  6. Tail Lights
  7. Stealth Bulbs
Maintenance
  1. Routine Maintenance & Tune-Up Packages
  2. Oil Filters & Oil Filter Kits
  3. Air Filters
  4. Fuel Filters
  5. Cabin Air Filters, Heppa Filters, & Microfilters
  6. Ignition Coils
  7. Spark Plugs
  8. Bentley Repair / Service Manuals
  9. Service Reset Tools & Fault Code Readers
  10. Anti-Freeze and Coolant
  11. Engine Oils - Genuine BMW and OEM
  12. Power Steering and Hydraulic Fluids
  13. Transmission and Gear Oil - Genuine BMW and OEM
  14. MOTUL Engine Oil and Gear Lubricants
  15. Red Line Oil & Fluids
  16. Liqui-Moly Oil and Additives
Suspension
  1. Shocks & Struts
  2. H&R Performance Springs
  3. Dinan Performance Springs
  4. Spring & Shock Packages
  5. Bilstein PSS PSS9 PSS10 Coil Over Suspensions
  6. H&R Coil Over Suspensions
  7. KW Coil Over Suspensions
  8. ST Suspension Coilover Kits
  9. Turner Motorsport TrackSport Coil-Over Suspension Kits
  10. Turner Motorsport Racing Suspension Kits
  11. Chassis Reinforcement Kits & Parts
  12. Sway Bar Kits
  13. Sway Bar Links & Sway Bar Parts
  14. Camber / Caster Kits
  15. Strut Braces & Stress Bars
  16. Control Arm Replacements & Upgrades
  17. Suspension Bushings & Mounts
  18. Wheel Bearings & Hub Assemblies
  19. Steering Racks & Power Steering Pumps
  20. Tie Rods & Steering Parts
  21. Coil Over Spring Hardware
Wheels
  1. Apex Flow Formed Alloy Wheels
  2. Forgeline Custom Forged Alloy Wheels
  3. HRE FlowForm Performance Alloy Wheels
  4. Rohana Wheels
  5. D Force Flow Formed Alloy Wheels
  6. Original BMW Wheels and Wheel Upgrades
  7. Turner Motorsport Wheel Spacers
  8. ECS Tuning Wheel Spacers
  9. H&R Wheel Spacers
  10. Wheel Bolts, Wheel Studs and Nuts
  11. Wheel Emblems, Caps, and Accessories
  12. High Performance Wheels
Tools
  1. Alignment Tools
  2. Battery Chargers and Tenders
  3. Brake Tools
  4. Clutch Alignment Tools
  5. Coil Over Wrenches
  6. Cylinder Head and VANOS Tools
  7. Fan and Fan Clutch Tools
  8. Fault Code Readers and OBD Scan Tools
  9. Fuel System Tools
  10. Genuine BMW Tool Kits
  11. Oil Service Tools
  12. Sockets
  13. Spark Plug Sockets
  14. Transmission and Differential Tools
  15. Wheel Pin Tools
  16. Workshop Chemicals
Clearance
Choose BMW
BMW 1 Series
  1. (E82) 1-series Coupe 2008+
  2. (E88) 1-series Convertible 2008+
BMW 2 Series
  1. (F22) 2-Series Coupe 2014+
  2. (F23) 2-Series Convertible 2014+
  3. (F87) M2 2016+
BMW 3 Series
  1. (E21) 3-Series 1977-1983
  2. (E30) 3-series 1984-1991
  3. (E30) M3 1988-1991
  4. (E36) 3-series 1992-1999
  5. (E36) M3 1995-1999
  6. (E46) 3-Series 1999-2005
  7. (E46) M3 2001-2006
  8. (E90) 3-Series Sedan 2006-2011
  9. (E90) M3 Sedan 2008-2013
  10. (E91) 3-Series Touring 2006-2013
  11. (E92) 3-Series Coupe 2007-2013
  12. (E92) M3 Coupe 2008-2013
  13. (E93) 3-Series Convertible 2007-2013
  14. (E93) M3 Convertible 2008-2013
  15. (F30) 3-Series Sedan 2012+
  16. (F31) 3-Series Touring 2014+
  17. (F80) M3 2015+
  18. (F34) 3-Series Gran Turismo 2014+
BMW 4 Series
  1. (F32) 4-Series Coupe 2014+
  2. (F33) 4-Series Convertible 2015+
  3. (F34) 4-Series Gran Turismo 2014+
  4. (F82) M4 Coupe 2015+
  5. (F83) M4 Convertible 2015+
  6. (F36) 4-Series Gran Coupe 2015+
BMW 5 Series
  1. (E34) M5 1991-1993
  2. (E39) M5 2000-2003
  3. (E60) M5 2006-2010
  4. (E28) 5-Series 1982-1988
  5. (E34) 5-Series 1989-1995
  6. (E39) 5-Series 1996-2003
  7. (E60) 5-Series Sedan 2004-2010
  8. (E61) 5-Series Touring 2006-2010
  9. (F10) 5-Series 2011+
  10. (G30) 5-Series 2017+
BMW 6 Series
  1. (E24) 6-Series 1977-1989
  2. (E63) 6-Series Coupe 2004-2010
  3. (E64) 6-Series Convertible 2004-2010
  4. (F06) 6-Series Gran Coupe 2013+
  5. (F12) 6-Series Coupe 2011+
  6. (F13) 6-Series Convertible 2011+
BMW 7 Series
  1. (E32) 7-Series 1988-1994
  2. (E38) 7-Series 1995-2001
  3. (E65) 7-Series SWB 2002-2007
  4. (E66) 7-Series LWB 2002-2007
  5. (F01) 7-Series SWB 2009+
  6. (F02) 7-Series LWB 2009+
BMW 8 Series BMW Classics (E9, Bavaria, Isetta, etc)
  1. 2500
  2. 2800
  3. 3.0Si
  4. Bavaria
  5. 2800CS
  6. 3.0CS
  7. 2002
  8. 2002tii
  9. (E12) 528i 1977-1981
  10. (E12) 530i 1975-1978
BMW X Series (SAV)
  1. (E84) X1 Series 2013+
  2. (E83) X3 2004-2010
  3. (F25) X3 2011+
  4. (F26) X4 2015+
  5. (E53) X5 2000-2006
  6. (E70) X5 2007-2013
  7. (F15) X5 2014+
  8. (F85) X5 M 2015+
  9. (E71) X6 2008+
  10. (F16) X6 2015+
  11. (F86) X6 M 2015+
  12. (F48) X1 2016+
  13. (F48) X1 (2016+)
BMW Z Series
  1. (E36/7) Z3 1997-2002
  2. (E85) Z4 M Roadster
  3. (E85/E86/E89) Z4 2003+
  4. (E86) Z4 M Coupe
  5. (E52) Z8 2000-2003
BMW 1600-2002 / tii BMW i Series
  1. (I01) BMW i3 2014+
  2. (I12) BMW i8 2014+
MINI Cooper and Cooper S
Racing
Racing Home Racing News Racing Schedule Racing Photo Gallery
Gallery
Photo Gallery Wallpaper Project Cars
  1. Project i8
  2. Project F80 M3
  3. Turner F82 M4
  4. Turner X5 M
  5. Turner F22 2 Series
  6. Turner F13 M6
  7. Turner F10 M5
  8. Turner F30 335i
  9. Turner E9X M3
  10. Turner E92 335i
  11. Turner E82 1 Series
  12. Turner ActiveE (100% Electric)
  13. Turner E46 M3
  14. Turner E46 330i ZHP
  15. Turner E36 M3
  16. Turner E30 M3
  17. Turner MINI Cooper S
  18. McLaren F1
  19. Turner E92 M3 Lime Rock
  20. Turner F80 M3 Silverstone
Video Gallery
Projects
Turner BMW i8 Turner BMW F80 M3 Turner BMW F82 M4 Turner BMW X5 M Turner BMW F22 2 Series Turner BMW F13 M6 Turner BMW F10 M5 Turner BMW F30 335i Turner BMW E9X M3 Turner BMW E92 335i Turner BMW E82 1 Series Turner BMW ActiveE (100% Electric) Turner BMW E46 M3 Turner BMW E46 330i ZHP Turner BMW E36 M3 Turner BMW E30 M3 Turner MINI Cooper S McLaren F1 Turner BMW E92 M3 Lime Rock Turner BMW F80 M3 Silverstone
About Us
About Turner Motorsport Customer Feedback The Turner Team
  1. Open Positions
Returns Policy Shipping Info Contact Us Privacy Policy Security Policy FAQs

E46 M3 D Force Flow Formed Alloy Wheels

E46 M3 D Force Flow Formed Alloy Wheels D-Force Wheels has been one of the leading innovators in flow-formed alloy wheels for the BMW market. These wheels use a special manufacturing process that is a cross between forging and casting. Flow-forming is a process that results in a stronger wheel than the traditional casting process and less weight than a traditional forged wheel. Many high-quality and OEM wheel manufacturers are moving to this flow forming process. D-Force first gained credibility and fame with BMW CCA Club Racers throughout North America. A light weight, strong, and affordable race wheel proved to be a winning combination. D-Force Wheels are available in two distinct styles: LTW5 - light weight 5-spoke in 17" and 18" sizes and EmPower - light weight multi-spoke 'mesh' style wheel in an 18" size. For wheel information in general, check out our Wheel Tech Guide by clicking here.

LTW5 EmPower
You're currently viewing parts for your (E46) M3 2001-2006. Reset your chassis
For accurate results, specify your model below.
E46 M3 D-Force LTW5 18x9.5 Square Race Wheel Set These D-Force LTW5 wheels are one of the best track wheels you can use on the E46 M3. This is a special set with 9.5" wheels at all four corners so you can run a wider front tire for more grip. With most track tire options classed as a 275 width tire, a 9.5 or 10.0" wheel is ideal for the E46 M3 (275/30, 275/35, 275/40, etc). Our Grand-Am Cup E46 M3s used 9.5 wheels in front and rear with a 275/35-18 Hoosier. Using a non-staggered wheel set is the first step for any tracked M3. These wheels are light weight but strong, being formed from a special process that makes the alloy stronger and less porous than traditional casting methods. Thousands of the LTW5 wheels have been sold with zero complaints about strength, making these an unbeatable track wheel option. They're even easy to clean! While running a square setup will help reduce understeer, there are other factors to consider as well in fine-tuning the handling to reduce understeer and create a more neutral car.

Wheel Specs:
Front: 18x9.5 / ET 35 offset / 18.5lbs
Rear: 18x9.5 / ET 35 offset (requires 10mm spacer) / 18.5lbs
Because these wheels were built for more than one application, a 10mm spacer is required in the rear to maintain the factory wheel position and stance. This package of wheels includes the 10mm spacers and longer wheel bolts (remove the wheel bolts in the menu if you're running studs). When installing, ensure the spacer fits flush against the surface of the brake rotor hub. Minor trimming of the hub lip may be required for a completely flush fit.

For more information on BMW wheels and wheel info in general, check out our Wheel Fitment Guide by clicking here.

This wheel set is intended for the following BMWs:
2001-2006 E46 BMW M3
Part #: E46-M3-LTW5-95S
Price: $1142.35 (USD) 
D-Force LTW5 18x9.0
Wheel Specs
Fitment:Front* / Rear
Size:18x9.0"
Offset (mm):41
Weight (lbs):18
Profile:Flat

LTW5 wheels are some of the strongest and lightest wheels you can find for your BMW. It's no wonder that you'll find so many cars at track events with LTW5 wheels. Through advanced engineering and manufacturing methods D Force has created a lightweight wheel that can also withstand the stresses and rigors of a racetrack. D-Force were pioneers in the flow-forming casting technology that results in wheel stronger and lighter than other cast wheels. LTW5 wheels are typically over 10lbs lighter than a factory BMW wheel! With less weight the car is able to accelerate faster, the brakes are more responsive, and the suspension can react quicker which is especially helpful in transitions and autocross. The LTW5 style uses a classic 5-spoke design with clean simple good looks and generous sizing for big brakes. They're also easy to clean! Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack.

These D-Force wheels use the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For additional resources on wheel fitments, refer to our Wheel Guide page (http://www.turnermotorsport.com/t-wheel_guide.aspx) or give us a call or e-mail.

Sold per wheel.
Part #: LTW518x9-FB-ET41
Price: $259.95 (USD) 
Quantity:   
E46 M3 D-Force EmPower 18-inch Wheel Set These striking mesh style wheels are produced by D Force, the same manufacturer as the highly successful LTW5 wheels, and are a excellent alternative to the factory 18" wheels. This EmPower wheel set is a staggered fitment - 18x8.5 in the front and 18x9.5 in back. The front wheels are a half-inch wider than stock to allow a wider tire for more front end grip. The mesh styling of these wheels is drawn from other high end factory and aftermarket wheels so they almost look OEM. They are available in either silver or anthracite (dark grey) centers with a polished outer lip. And one of the best features of these wheels is their weight - under 21lbs for either a front or rear wheel! They are exceptionally strong too - using a flow forming casting and CNC process that is nearly as strong as a true forged wheel. If you've gotten a bit tired of the factory 18" look, these are an exceptional alternative for the money! Price is for a set of two front and two rear wheels (includes rear centering ring). No spacers required! Add new center caps or ///M badge from the menu below.

Wheel Specs:
Front: 18x8.5 / ET 40 offset / 19.2lbs. Recommended tire size: 235/35-255/35-18
Rear: 18x9.5 / ET 25 offset / 20.9lbs. Recommended tire size: 255/35-275/35-18

For more information on BMW wheels and wheel info in general, check out our Wheel Fitment Guide by clicking here.

This wheel set is intended for the following BMWs:
2001-2006 E46 BMW M3
Part #: TMS14397
Price: $1379.40 (USD) 
D-Force LTW5 18x9.5
Wheel Specs
Fitment:Front* / Rear
Size:18x9.5"
Offset (mm):35
Weight (lbs):18.5
Profile:Flat

LTW5 wheels are some of the strongest and lightest wheels you can find for your BMW. It's no wonder that you'll find so many cars at track events with LTW5 wheels. Through advanced engineering and manufacturing methods D Force has created a lightweight wheel that can also withstand the stresses and rigors of a racetrack. D-Force were pioneers in the flow-forming casting technology that results in wheel stronger and lighter than other cast wheels. LTW5 wheels are typically over 10lbs lighter than a factory BMW wheel! With less weight the car is able to accelerate faster, the brakes are more responsive, and the suspension can react quicker which is especially helpful in transitions and autocross. The LTW5 style uses a classic 5-spoke design with clean simple good looks and generous sizing for big brakes. They're also easy to clean! Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack.

These D-Force wheels use the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For additional resources on wheel fitments, refer to our Wheel Guide page (http://www.turnermotorsport.com/t-wheel_guide.aspx) or give us a call or e-mail.

Sold per wheel.
Part #: TMS184566
Price: $299.95 (USD) 
Quantity:   
E46 M3 D-Force LTW5 18-inch Staggered Wheel Set Looking for an 'aggressive' wheel setup for your E46 M3 but don't want to have to worry about rubbing or clearance problems? This set of staggered D-Force LTW5 wheels for the E46 M3 uses a very aggressive 9.0" front wheel and a standard sized 9.5" rear wheel. There is a lot of room in the front to run a bigger wheel and the 9.0 fits nicely without being too wide. And with the wider front wheel you can use a meatier front tire for more grip without having to jump all the way up to a square race setup. Here are the critical wheel specs:

Front: 18x9.0 / ET 41 / 18lbs. This aggressive offset will push the wheel out by 19mm (.75") compared to the factory 8.0" wheel. That's like putting a 20mm spacer on your stock wheel but also gaining a full inch of wheel width. We recommend a 255-265 tire size on this wheel.
Rear: 18x9.5 / ET 25 with a 10mm spacer / 18.5lbs. This is the stock width because the M3 9.5 is already very wide for this car. We recommend a 265-275mm width tire. The LTW5 wheel comes as a 35mm offset and we add a 10mm spacer to bring it back to the correct, factory position. Longer black wheel bolts are included with this package. With the 10mm spacers, minor trimming of the car's hub lip may be required for a flush fit.

These new wheels are among the strongest and lightest we have ever offered. And they are excellent quality with years of proven satisfaction from street warriors to track junkies alike. These wheels are cast using a new flow-forming method that keeps the weight low and strength high compared with traditional cast wheels. This process results in a 'semi-forged' wheel at a fraction of the cost of a fully forged wheel.

For more information on BMW wheels and wheel info in general, check out our Wheel Fitment Guide by clicking here.

This wheel package is intendted for the following BMWs:
2001-2006 E46 BMW M3
Part #: TMS14400
Price: $1338.85 (USD) 
D-Force LTW5 18x9.0
Wheel Specs
Fitment:Front* / Rear
Size:18x9.0"
Offset (mm):41
Weight (lbs):18
Profile:Flat

LTW5 wheels are some of the strongest and lightest wheels you can find for your BMW. It's no wonder that you'll find so many cars at track events with LTW5 wheels. Through advanced engineering and manufacturing methods D Force has created a lightweight wheel that can also withstand the stresses and rigors of a racetrack. D-Force were pioneers in the flow-forming casting technology that results in wheel stronger and lighter than other cast wheels. LTW5 wheels are typically over 10lbs lighter than a factory BMW wheel! With less weight the car is able to accelerate faster, the brakes are more responsive, and the suspension can react quicker which is especially helpful in transitions and autocross. The LTW5 style uses a classic 5-spoke design with clean simple good looks and generous sizing for big brakes. They're also easy to clean! Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack.

These D-Force wheels use the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For additional resources on wheel fitments, refer to our Wheel Guide page (http://www.turnermotorsport.com/t-wheel_guide.aspx) or give us a call or e-mail.

Sold per wheel.
Part #: LTW518x9-S-ET41
Price: $259.95 (USD) 
Quantity:   
D-Force LTW5 18x9.5
Wheel Specs
Fitment:Front* / Rear
Size:18x9.5"
Offset (mm):35
Weight (lbs):18.5
Profile:Flat

LTW5 wheels are some of the strongest and lightest wheels you can find for your BMW. It's no wonder that you'll find so many cars at track events with LTW5 wheels. Through advanced engineering and manufacturing methods D Force has created a lightweight wheel that can also withstand the stresses and rigors of a racetrack. D-Force were pioneers in the flow-forming casting technology that results in wheel stronger and lighter than other cast wheels. LTW5 wheels are typically over 10lbs lighter than a factory BMW wheel! With less weight the car is able to accelerate faster, the brakes are more responsive, and the suspension can react quicker which is especially helpful in transitions and autocross. The LTW5 style uses a classic 5-spoke design with clean simple good looks and generous sizing for big brakes. They're also easy to clean! Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack.

These D-Force wheels use the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For additional resources on wheel fitments, refer to our Wheel Guide page (http://www.turnermotorsport.com/t-wheel_guide.aspx) or give us a call or e-mail.

Sold per wheel.
Part #: TMS184565
Price: $309.95 (USD) 
Free Shipping Free Shipping
Quantity:   
D-Force LTW5 18x9.0
Wheel Specs
Fitment:Front* / Rear
Size:18x9.0"
Offset (mm):41
Weight (lbs):18
Profile:Flat

LTW5 wheels are some of the strongest and lightest wheels you can find for your BMW. It's no wonder that you'll find so many cars at track events with LTW5 wheels. Through advanced engineering and manufacturing methods D Force has created a lightweight wheel that can also withstand the stresses and rigors of a racetrack. D-Force were pioneers in the flow-forming casting technology that results in wheel stronger and lighter than other cast wheels. LTW5 wheels are typically over 10lbs lighter than a factory BMW wheel! With less weight the car is able to accelerate faster, the brakes are more responsive, and the suspension can react quicker which is especially helpful in transitions and autocross. The LTW5 style uses a classic 5-spoke design with clean simple good looks and generous sizing for big brakes. They're also easy to clean! Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack.

These D-Force wheels use the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For additional resources on wheel fitments, refer to our Wheel Guide page (http://www.turnermotorsport.com/t-wheel_guide.aspx) or give us a call or e-mail.

Sold per wheel.
Part #: TMS184586
Price: $249.95 (USD) 
Quantity:   
D-Force LTW5 18x10.0
Wheel Specs
Fitment:Front* / Rear
Size:18x10.0"
Offset (mm):43
Weight (lbs):19
Profile:Flat

LTW5 wheels are some of the strongest and lightest wheels you can find for your BMW. It's no wonder that you'll find so many cars at track events with LTW5 wheels. Through advanced engineering and manufacturing methods D Force has created a lightweight wheel that can also withstand the stresses and rigors of a racetrack. D-Force were pioneers in the flow-forming casting technology that results in wheel stronger and lighter than other cast wheels. LTW5 wheels are typically over 10lbs lighter than a factory BMW wheel! With less weight the car is able to accelerate faster, the brakes are more responsive, and the suspension can react quicker which is especially helpful in transitions and autocross. The LTW5 style uses a classic 5-spoke design with clean simple good looks and generous sizing for big brakes. They're also easy to clean! Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack.

These D-Force wheels use the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For additional resources on wheel fitments, refer to our Wheel Guide page (http://www.turnermotorsport.com/t-wheel_guide.aspx) or give us a call or e-mail.

Sold per wheel.
Part #: LTW518x10-S-ET43
Price: $299.95 (USD) 
Quantity:   
D-Force LTW5 18x10.0
Wheel Specs
Fitment:Front* / Rear
Size:18x10.0"
Offset (mm):43
Weight (lbs):19
Profile:Flat

LTW5 wheels are some of the strongest and lightest wheels you can find for your BMW. It's no wonder that you'll find so many cars at track events with LTW5 wheels. Through advanced engineering and manufacturing methods D Force has created a lightweight wheel that can also withstand the stresses and rigors of a racetrack. D-Force were pioneers in the flow-forming casting technology that results in wheel stronger and lighter than other cast wheels. LTW5 wheels are typically over 10lbs lighter than a factory BMW wheel! With less weight the car is able to accelerate faster, the brakes are more responsive, and the suspension can react quicker which is especially helpful in transitions and autocross. The LTW5 style uses a classic 5-spoke design with clean simple good looks and generous sizing for big brakes. They're also easy to clean! Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack.

These D-Force wheels use the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For additional resources on wheel fitments, refer to our Wheel Guide page (http://www.turnermotorsport.com/t-wheel_guide.aspx) or give us a call or e-mail.

Sold per wheel.
Part #: TMS184582
Price: $299.95 (USD) 
Quantity:   
D-Force LTW5 18x10.0
Wheel Specs
Fitment:Front* / Rear
Size:18x10.0"
Offset (mm):43
Weight (lbs):19
Profile:Flat

LTW5 wheels are some of the strongest and lightest wheels you can find for your BMW. It's no wonder that you'll find so many cars at track events with LTW5 wheels. Through advanced engineering and manufacturing methods D Force has created a lightweight wheel that can also withstand the stresses and rigors of a racetrack. D-Force were pioneers in the flow-forming casting technology that results in wheel stronger and lighter than other cast wheels. LTW5 wheels are typically over 10lbs lighter than a factory BMW wheel! With less weight the car is able to accelerate faster, the brakes are more responsive, and the suspension can react quicker which is especially helpful in transitions and autocross. The LTW5 style uses a classic 5-spoke design with clean simple good looks and generous sizing for big brakes. They're also easy to clean! Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack.

These D-Force wheels use the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For additional resources on wheel fitments, refer to our Wheel Guide page (http://www.turnermotorsport.com/t-wheel_guide.aspx) or give us a call or e-mail.

Sold per wheel.
Part #: LTW518x10-A-ET43
Price: $299.95 (USD) 
Quantity:   
D-Force EmPower 18x9.5
Wheel Specs
Fitment:Rear
Size:18x9.5"
Offset (mm):43
Weight (lbs):21
Profile:Wide Lip

These mesh wheels come from the same manufacturer of the popular LTW5 wheels. Which means they are some of the strongest and lightest wheels you can find for your BMW. They also look amazing with the mesh "Y-spoke" design and polished outer lip blending with your BMW for a classis appearance. Through advanced engineering and manufacturing methods D Force has created a lightweight wheel that can also withstand the stresses and rigors of a racetrack. D-Force were pioneers in the flow-forming casting technology that results in wheel stronger and lighter than other cast wheels. EmPower wheels are typically over 10lbs lighter than a factory BMW wheel! With less weight the car is able to accelerate faster, the brakes are more responsive, and the suspension can react quicker which is especially helpful in transitions and autocross. The EmPower uses the classic mesh pattern found on so many other German wheels and are a natural complement to BMW's heritage and styling cues. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack.

These D-Force wheels use the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For additional resources on wheel fitments, refer to our Wheel Guide page (http://www.turnermotorsport.com/t-wheel_guide.aspx) or give us a call or e-mail.

Sold per wheel.
Part #: TMS184595
Price: $319.95 (USD) 
Quantity:   
E46 M3 D-Force LTW5 18x9.5 Square Race Wheel Set These D-Force LTW5 wheels are one of the best track wheels you can use on the E46 M3. This is a special set with 9.5" wheels at all four corners so you can run a wider front tire for more grip. With most track tire options classed as a 275 width tire, a 9.5 or 10.0" wheel is ideal for the E46 M3 (275/30, 275/35, 275/40, etc). Our Grand-Am Cup E46 M3s used 9.5 wheels in front and rear with a 275/35-18 Hoosier. Using a non-staggered wheel set is the first step for any tracked M3. These wheels are light weight but strong, being formed from a special process that makes the alloy stronger and less porous than traditional casting methods. Thousands of the LTW5 wheels have been sold with zero complaints about strength, making these an unbeatable track wheel option. They're even easy to clean! While running a square setup will help reduce understeer, there are other factors to consider as well in fine-tuning the handling to reduce understeer and create a more neutral car.

Wheel Specs:
Front: 18x9.5 / ET 35 offset / 18.5lbs
Rear: 18x9.5 / ET 35 offset (requires 10mm spacer) / 18.5lbs
Because these wheels were built for more than one application, a 10mm spacer is required in the rear to maintain the factory wheel position and stance. This package of wheels includes the 10mm spacers and longer wheel bolts (remove the wheel bolts in the menu if you're running studs). When installing, ensure the spacer fits flush against the surface of the brake rotor hub. Minor trimming of the hub lip may be required for a completely flush fit.

For more information on BMW wheels and wheel info in general, check out our Wheel Fitment Guide by clicking here.

This wheel set is intended for the following BMWs:
2001-2006 E46 BMW M3
Part #: TMS14398
Price: $1039.80 (USD) 
Quantity:   
D-Force LTW5 18x9.0
Wheel Specs
Fitment:Front* / Rear
Size:18x9.0"
Offset (mm):41
Weight (lbs):18
Profile:Flat

LTW5 wheels are some of the strongest and lightest wheels you can find for your BMW. It's no wonder that you'll find so many cars at track events with LTW5 wheels. Through advanced engineering and manufacturing methods D Force has created a lightweight wheel that can also withstand the stresses and rigors of a racetrack. D-Force were pioneers in the flow-forming casting technology that results in wheel stronger and lighter than other cast wheels. LTW5 wheels are typically over 10lbs lighter than a factory BMW wheel! With less weight the car is able to accelerate faster, the brakes are more responsive, and the suspension can react quicker which is especially helpful in transitions and autocross. The LTW5 style uses a classic 5-spoke design with clean simple good looks and generous sizing for big brakes. They're also easy to clean! Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack.

These D-Force wheels use the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For additional resources on wheel fitments, refer to our Wheel Guide page (http://www.turnermotorsport.com/t-wheel_guide.aspx) or give us a call or e-mail.

Sold per wheel.
Part #: LTW518x9-A-ET41
Price: $279.95 (USD) 
Quantity:   
D-Force LTW5 18x9.5
Wheel Specs
Fitment:Front* / Rear
Size:18x9.5"
Offset (mm):35
Weight (lbs):18.5
Profile:Flat

LTW5 wheels are some of the strongest and lightest wheels you can find for your BMW. It's no wonder that you'll find so many cars at track events with LTW5 wheels. Through advanced engineering and manufacturing methods D Force has created a lightweight wheel that can also withstand the stresses and rigors of a racetrack. D-Force were pioneers in the flow-forming casting technology that results in wheel stronger and lighter than other cast wheels. LTW5 wheels are typically over 10lbs lighter than a factory BMW wheel! With less weight the car is able to accelerate faster, the brakes are more responsive, and the suspension can react quicker which is especially helpful in transitions and autocross. The LTW5 style uses a classic 5-spoke design with clean simple good looks and generous sizing for big brakes. They're also easy to clean! Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack.

These D-Force wheels use the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For additional resources on wheel fitments, refer to our Wheel Guide page (http://www.turnermotorsport.com/t-wheel_guide.aspx) or give us a call or e-mail.

Sold per wheel.
Part #: TMS180844
Price: $299.95 (USD) 
Quantity:   
Get notified about money saving
specials & deals for your BMW
enter your email address
  • 22 years of BMW Tuning.
  • Award winning service.
  • 10,000's of parts in stock.
  • Quality BMW Parts only.
  • Hassle-free returns.

  • Find us on Facebook




    • 1-800-280-6966
      Mon-Thur 9am-6pm ET, Fri 9am-5pm ET

      • © TurnerMotorsport.com 1993-2017. All Rights Reserved.