Track Safety for BMW E46 M3 S54 (1999-2005)

Clear BMW chassis
If you're like us, then you enjoy taking your vehicle to the track whenever you get a chance. Whether you have a fully built track slayer or if you just enjoy taking your daily driver to autocross events, Turner Motorsport carries what you need to pass tech and, more importantly, keep yourself safe in the event of an accident.

Brey-Krause R-9252 Seat mount - Driver
Brey-Krause - Corporate Logo
T#:396428
Part#: R-9252
In Stock
$179.95
Free Shipping

The R-925X line of seat mounts is the clean, simple, light weight, and strong way to attach your fixed back bucket seats directly to the floor of your BMW. They are made specifically to fit in a small number of chassis and work with a limit range of seat sizes to create a precise fit with maximum head room. 

R-9252 Features

  • Fits seats between 410mm to 426mm wide at the side mount mounting point
  • 7lbs
  • 304 Stainless steel
  • Black wrinkle powder coat finish 
  • Includes provisions for fir extinguisher mount(R-2295)
H3R Performance HalGuard™ Clean Agent 2.5lb Fire Extinguisher - Black
H3R Performance - Corporate Logo
T#:402686
Part#: HG250B
In Stock
$224.95
Free Shipping

Track days can come to an abrupt ending when dealing with a vehicle fire. Causes can range from flammable fluids, such as leaking fuel, or overheating electronics and electrical shorts. Regardless of the cause, this can cause thousands of dollars of damage and can potentially become an immediate, life-threatening hazard if not properly handled. The best way to ensure your safety is to have a fire extinguisher on board that is made to put out any fires quickly and efficiently. You must also be certain that it is reliable enough to get the job done in an emergency. H3R Performance builds high quality extinguishers that feature strong steel cylinders, all metal valve construction, and aviation-quality steel mounting brackets all to make certain that this life saving device will function perfectly, without the worries of weak plastic valves or internals.

The HalGuard™ Clean Agent Extinguisher was specifically designed to combat fires in situations and places that water would only make worse, such as a fuel fire or electrical fires. These extinguishers contain Halotron® 1, an electrically non-conductive "clean" extinguisher that rapidly turns into gas and leaves behind no damaging residue that would need to be cleaned up and is environmentally friendly. Thanks to its liquid to gas evaporation, it can get in to hard to reach areas to properly extinguish any and all fire sources. It has also be extensively tested by the military and FAA for its fire fighting ability and is now the main extinguisher used at airports around the world.

Features:

  • No thermal shock to electronics
  • No mess or damage to vehicle or surfaces
  • Liquefied gas extinguishes hard-to-reach fires
  • Does not impair operator's vision
  • EPA approved
  • Listed and rated 2B:C by Underwriters Laboratories
  • Rechargeable
  • Made in U.S.A.
  • 2-strap mounting bracket
  • 6' - 10' discharge range
  • High quality steel cylinders
  • All metal valve construction
  • Compact, lightweight, easy to use
  • Five year limited warranty

Specifications:

  • Extinguishing Agent  --  Halotron® 1
  • Agent (lb.)  --  2.5
  • Gross Weight (lb.)  --  5.4
  • U/L Rating  --  2 B:C
  • Height (inches)  --  14.8
  • Width (inches)  --  5.0
  • Depth-diameter (inches)  --  3.0
GT3 FIA Approved Racing Seat
Sabelt - Corporate Logo
T#:553647
Part#: RFSEGT3N
Direct Ship
$690.00
$690.00

The GT3 is Sabelts' top-selling model. designed with an eye towards comfort, this seat provides support in all the right areas to make sure back and leg strain is reduced as much as possible. What you have is a seat that is just as comfortable on the track as it is on the interstate.

The shell is made from a lightweight gel-coated composite that holds the driver and protects along the sides of the seat as well. Moving further down the seat, the back is covered in  VEP fabric with high-density foam cells that support and absorb vibration. Leg bolstering is extra deep and will keep you in an upright and stable position and the VEP fabric covering ensures long-lasting durability. The seat pad is removable which makes swapping and/or cleaning a breeze,  and finally, a crotch strap hole in the bottom of the shell makes this seat compatible with 6-point harnesses.

Sabelt is a global leader in development and manufacture of original equipment car seats, seat belts, and motorsport products for racing activities. Through advanced and extensive crash test simulation, they are able to offer products that are proven to achieve the highest level of performance and safety. 


Brey-Krause Quick Release Fire Extinguisher Mount - 3"
Brey-Krause - Corporate Logo
T#:396272
Part#: R-9520
Ships in 3 Business Days
$241.50
Free Shipping

The Brey-Krause "Quick Release" Fire Extinguisher Mount is exquisitely CNC machined from T6 6061 billet aluminum and clear anodized for durability. The part design allows the fire extinguisher to be released from the bracket with one hand when time is of the essence. The bracket attaches to all existing fire extinguisher mounts and includes stainless steel hardware. 

Mount holds any 3" fire extinguisher


Brey-Krause R-9253 Seat mount - Passenger
Brey-Krause - Corporate Logo
T#:396429
Part#: R-9253
Ships in 3 Business Days
$179.95
Free Shipping

The R-925X line of seat mounts is the clean, simple, light weight, and strong way to attach your fixed back bucket seats directly to the floor of your BMW. They are made specifically to fit in a small number of chassis and work with a limit range of seat sizes to create a precise fit with maximum head room. 

R-9255 Features

  • Fits seats between 410mm to 426mm wide at the side mount mounting point
  • 7lbs
  • 304 Stainless steel
  • Black wrinkle powder coat finish 
  • Includes provisions for fir extinguisher mount(R-2295)
Brey Krause R-9223 Seat mount - Passenger
Brey-Krause - Corporate Logo
T#:396556
Part#: R-9223
In Stock
$179.95
Free Shipping

The R-922X line of seat mounts is the clean, simple, light weight, and strong way to attach your fixed back bucket seats directly to the floor of your BMW. They are made specifically to fit in a small number of chassis and work with a limit range of seat sizes to create a precise fit with maximum head room. 

R-9223 Features

  • Fits seats between 365mm to 429mm wide at the side mount mounting point
  • Uses factory sliders, power or manual 
  • 7lbs
  • 304 Stainless steel
  • Black wrinkle powder coat finish 
  • Includes provisions for fir extinguisher mount(R-2295)

*Note for use with power sliders BMW switch 61311381205 is needed*


RaceQuip 5 Point Latch And Link 3" Racing Harness - SFI 16.1 Approved
Racequip - Corporate Logo
T#:403220
Part#: 7110XX5PT
In Stock
Starting at $69.95
Starting at $69.95

Racing harnesses are required at any respectable track or strip, but they tend to run upwards of hundreds of dollars. RaceQuip designs and builds safety equipment for just this issue! Since 1975, RaceQuip has been building some of the highest quality racing safety gear on the market. Their high quality and low cost safety gear is the result of wanting to provide "The Best Value in Safety", that keeps drivers safe without draining their wallet.

This Standard 5 Point Latch and Link Racing harness is RaceQuips most popular racing harness, priced at $74.99 or below while still being fully SFI 16.1 Approved.

All harness systems are constructed using drop-forged steel hardware for ultimate strength and reduced weight. All hardware is cadmium plated for added protection. They use only 3" premium polyester webbing and all belts are box-x pattern sewn to ensure uniform stitch length and strength. Belts and hardware are routinely tested to verify compliance with SFI 16.1 standards.

All of their  harness sets feature a latch & link system to retain the belts. The latch & link system is distinguished by a pivoting "hammer," called a Duckbill, which locks all of the belts into place by snapping down into a detent. Both shoulder belts and the sub belt are hooked over the link; the link is inserted into the latch; the Duckbill is then brought down into and over the link, securely holding all of the pieces in place.

RaceQuip Latch & Link Harness Systems come as a "pull down" design. This means that the lap belts must be pulled down and away from the center latch mechanism to tighten.  Since their belts are "double adjustable", lengths are easily adjusted on either end for ease of installation. Using the included three bar slide you can mount the belts by either wrapping them around a rollbar or by bolting them in place. Snap-in ends and eyebolts are sold separately if you want to install your belts in that manner.

Features and Specifications:

  • Exceeds SFI 16.1 Rating (SFI Tags Affixed)
  • NOT D.O.T. / FMVSS Certified for On Highway Use
  • Premium 3" Polyester Webbing
  • Twin Individual Shoulder Belts
  • Pull Down Style Lap Belt
  • 5 Point Design - Single 2" Crotch Sub Strap
  • 3" Hardware Ends Installed 
  • Double Adjustable for Ease of Installation
  • Wrap Around or Bolt-in Mounting
  • Drop-Forged Steel Hardware (no bolts)
  • Shoulders Adjust from 20" to 62"
  • Lap Belt Adjusts 20" to 60"
  • Available in Black, Red, Blue, Yellow, Orange, Purple, Platinum, Green and Pink
  • Can Be Re-webbed (SFI) Upon Expiration
Brey Krause R-9221 Seat mount - passenger
Brey-Krause - Corporate Logo
T#:396554
Part#: R-9221
In Stock
$179.95
Free Shipping

The R-922X line of seat mounts is the clean, simple, light weight, and strong way to attach your fixed back bucket seats directly to the floor of your BMW. They are made specifically to fit in a small number of chassis and work with a limit range of seat sizes to create a precise fit with maximum head room. 

R-9221 Features

  • Fits seats between 430mm to 460mm wide at the side mount mounting point
  • Uses factory sliders, power or manual 
  • 7lbs
  • 304 Stainless steel
  • Black wrinkle powder coat finish 
  • Includes provisions for fir extinguisher mount(R-2295)

*Note for use with power sliders BMW switch 61311381205 is needed*


Harness Bar - E46 Coupe
Brey-Krause - Corporate Logo
T#:396509
Part#: R-1202
Direct Ship
$735.00
$735.00

This harness mount bar properly locates and supports racing shoulder harnesses relative to the driver. The harness guides also prevent excessive shifting and fatigue of the driver during the high G loads of cornering and braking. This bar is easy to install and remove, use only existing holes and mounting points, and will not damage the car in any way.

*For Coupe models only*


Sabelt FIA Approved 6-Point Saloon Rally Racing Harness
Sabelt - Corporate Logo
T#:552831
Part#: SAFIACCS3
Direct Ship
Starting at $295.00
Starting at $295.00

Sabelt is a global leader in development and manufacture of original equipment car seats, seat belts, and motorsport products for racing activities. Through advanced and extensive crash test simulation, they are able to offer products that are proven to achieve the highest level of performance and safety. 

Sabelt FIA approved racing harnesses are designed in a variety of configurations to suit your exact need and vehicle. Found in some of the fastest competition vehicles in the world, you can rest assured that you're being held securely by some of the finest belts available. Made by hand in Italy, quality and consistency are second to none. Whether you choose a four or six point, with aluminum or steel hardware each belt is designed to hold up to the rigors of the racetrack and to perform flawlessly in the event of a collision.

Features:

  • Shoulder straps: full 3’’ width - aluminum lightweight adjuster 
  • Shoulder fixing: snap hook - tribar 
  • Lap belts: full 3’’ width - aluminum lightweight adjuster Pull Up-snap hook fixing  
  • New compact buckle designed with crotches slots integrated to main body 
  • Crotch straps: 2’’ width - snap hook / tribar fixing
Brey Krause R-9220 Seat mount - Driver
Brey-Krause - Corporate Logo
T#:396553
Part#: R-9220
Ships in 3 Business Days
$179.95
Free Shipping

The R-922X line of seat mounts is the clean, simple, light weight, and strong way to attach your fixed back bucket seats directly to the floor of your BMW. They are made specifically to fit in a small number of chassis and work with a limit range of seat sizes to create a precise fit with maximum head room. 

R-9220 Features

  • Fits seats between 430mm to 460mm wide at the side mount mounting point
  • Uses factory sliders, power or manual 
  • 7lbs
  • 304 Stainless steel
  • Black wrinkle powder coat finish 
  • Includes provisions for fir extinguisher mount(R-2295)

*Note for use with power sliders BMW switch 61311381205 is needed*

Brey-Krause R-9254 Seat mount - Driver
Brey-Krause - Corporate Logo
T#:396427
Part#: R-9254
Ships in 3 Business Days
$179.95
Free Shipping

The R-925X line of seat mounts is the clean, simple, light weight, and strong way to attach your fixed back bucket seats directly to the floor of your BMW. They are made specifically to fit in a small number of chassis and work with a limit range of seat sizes to create a precise fit with maximum head room. 

R-9254 Features

  • Fits seats between 395mm to 409mm wide at the side mount mounting point
  • 7lbs
  • 304 Stainless steel
  • Black wrinkle powder coat finish 
  • Includes provisions for fir extinguisher mount(R-2295)


Brey-Krause R-9257 Seat mount - Passenger
Brey-Krause - Corporate Logo
T#:396424
Part#: R-9257
Ships in 3 Business Days
$179.95
Free Shipping

The R-925X line of seat mounts is the clean, simple, light weight, and strong way to attach your fixed back bucket seats directly to the floor of your BMW. They are made specifically to fit in a small number of chassis and work with a limit range of seat sizes to create a precise fit with maximum head room. 

R-9257 Features

  • Fits seats between 443mm to 460mm wide at the side mount mounting point
  • 7lbs
  • 304 Stainless steel
  • Black wrinkle powder coat finish 
  • Includes provisions for fir extinguisher mount(R-2295)
Brey-Krause R-9256 Seat mount - Driver
Brey-Krause - Corporate Logo
T#:396425
Part#: R-9256
Ships in 3 Business Days
$179.95
Free Shipping on orders $99 and up