BMW Suspension Bushings & Mounts for BMW E46 M3 S54 (1999-2005)

Clear BMW chassis
Suspension mounts are designed to absorb the energy of the shocks and springs and isolate road harshness from the chassis. But over time the original rubber mounts will crumble and fail. We have stock mounts and bushings as well as a wide selection of upgraded and heavier-duty for performance street cars. We also offer a full selection of race only bushings and mounts. Simply choose your car below. Included here you will find rear shock tower mounts, front strut mounts, subframe mounts, lower control arm bushings, rear trailing arm bushings, and more.

Turner Motorsport Sealed Monoball Rear Trailing Arm Bushings (RTAB) - V2.0 E36 E46 Z4
Turner Motorsport Sealed Monoball Rear Trailing Arm Bushings (RTAB) ...
Our sealed Monoball Rear Trailing Arm Bushings (RTAB) are...
Turner Motorsport - Corporate Logo
T#:555366
Part#: 017738TMS02
In Stock
Sale - Save 10% $285.95
$257.36
Free Shipping
Sale - Save 10% $285.95
$257.36
Free Shipping

Our sealed Monoball Rear Trailing Arm Bushings (RTAB) are the best solution for completely eliminating deflection and unwanted toe changes on the rear of the E36, E46, and Z4. While rubber and urethane bushings flex during load, the toe can change widely giving you nervous and unpredictable handling. These RTABs have a solid aluminum housing with a high-quality sealed OE bearing. These bushings were developed from years of competition use in various racing and HPDE events. There is simply no better RTAB unless your racing class rules prohibit the use of mono or spherical bearings.

The rear trailing arm bushings take a lot of abuse from acclerating, braking and cornering. The stock rubber bushings are just not up to the task of keeping rear wheel alignment in spec for very long, especially if you have upgraded to stickier tires and a better suspension. The pliable rubber flexes and twists which slows down reaction time and leaves you with a car that feels nervous and 'tail happy'. Urethane helps to control the alignment but issues with fitment, maintenance, and longevity keep us from recommending urethane on anything but a street car. We also offer a Delrin RTAB for cars that must conform to certain racing class rules. These sealed spherical bearings are the best at controlling rear toe alignment.

Our aluminum RTABs are very well made - high grade aluminum alloy and steel CNC'd out of a billet by an ISO 9001 certified manufacturer, each component is either hardcoated or nickel plated. While multiple manufacturers offer two piece designs, our research showed that a one piece bushing is a better design featuring a sealed bearing to keep contaminants out extending the life of the bearing.

Features:

Key Benefits:

  • Rear Trailing Arm Monoball eliminates unwanted deflection, maintaining alignment settings and minimizing wheel hop.
  • Allows full rear trailing arm articulation for low friction movement and eliminates binding found in rubber and poly bushings.
  • Completely streetable: utilizes an OES Lemforder brand sealed, greased ball joint for an extremely long service life with no increase to NVH.

Design Features:

  • Housing: Billet CNC 6061-T6 aluminum, type II anodized for exceptional durability and corrosion resistance
  • Bearing: OE Mercedes/lemforder 2043520027 Sealed ball joint
  • Bearing inserts: CNC machined 303 stainless steel.
  • Rebuildable

Clickhere for installation instructions.

This item fits the following BMWs:
1992-1998 E36 BMW 318i 318is 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
2003-2008 Z4 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe

Turner Motorsport Rear Trailing Arm Bushing Limiter Kit (RTAB Shim Kit)
Turner Motorsport Rear Trailing Arm Bushing Limiter Kit (RTAB Shim K...
Turner Motorsport Bushing Limiters were the first - and s...
Turner Motorsport - Corporate Logo
T#:964
Part#: TSU9990001
In Stock
Sale - Save 15% $89.95
$76.46
Free Shipping
Sale - Save 15% $89.95
$76.46
Free Shipping

Turner Motorsport Bushing Limiters were the first - and still the best - RTAB Limiter on the market. Instead of a 'floating' design that can rattle and wear, our aluminum Limiters are fixed in place and feature an anti-stick Teflon coating so the bushing never sticks and squeaks.

The great defect in the rear trailing arm bushing (RTAB) is that the soft rubber design allows too much movement and extension during cornering. The bushing is not strong enough to resist hard cornering loads. A stiffer bushing helps but has trade-offs in ride and comfort. If you want to maintain your ride comfort with rubber bushings, these RTAB Limiters will prolong their life and improve handling.

These Limiters sit on either side of the bushing and limit its movement. By limiting motion the bushing effectively becomes stiffer, improving handling and reducing toe change during cornering. When not cornering, the Limiters are not in play so ride comfort remains the same as stock. Our Limiters are permanently bolted to the housing that surrounds the bushing. Other types of Limiters 'float' between the bushing and housing, which can rattle and squeak as the bushings move. Instead of plastic or Delrin that will wear over time, our RTAB Limiters are made from aluminum with a tough hardcoat anodize (tougher than standard anodizing) and finished with a Teflon anti-stick coating.

Turner RTAB Limiter Kit includes -

  • set of 4 anodized aluminum bushing limiters
  • 5mm Allen bolts and washers
  • install template

Need E36/E46 RTAB bushings? Click here for replacement trailing arm bushings.

Click for installation instructions.

This item fits the following BMWs:
1992-1999 E36 BMW 318i 318is 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2006 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
2003-2010 E83 BMW X3 2.5 X3 3.0 X3 3.0si
2002-2008 E85 E86 BMW Z4 2.5 Z4 3.0 Z4 3.0i Z4 3.0si Z4 M Coupe Z4 M Roadster

Rear Subframe Bushings/Mount Set - Turner Solid Aluminum - E46/E46 M3, Z4/Z4 M
Rear Subframe Bushings/Mount Set - Turner Solid Aluminum - E46/E46 M...
The rear subframe is the heart of the BMW rear suspension...
Turner Motorsport - Corporate Logo
T#:581
Part#: TDR4680014
In Stock
$295.95
Free Shipping
Made in the USA The rear subframe is the heart of the BMW rear suspension. Not only do all of the suspension arms attach to it, the driveline runs through it via the differential and half-shafts. Therefore, a track-prepped E46 should never see any flex or deflection in any of the subframe mounts. Excessive movement here transfers to unwanted suspension motions elsewhere and is also a major contributor to failures in the rear floor sheetmetal.

While our Delrin-Aluminum subframe mounts conform to various racing series these all-aluminum mounts are the ultimate in reducing flex and deflection. The rubber stock mounts, and the Delrin mounts to a small degree, flex and deflect as various forces are applied throughout the subframe - on and off throttle loading, cornering on flat surfaces, bumpy surfaces, weight transfer, sticky race tires, etc. Too much flex from worn rubber mounts will transfer to flex where the subframe meets the chassis/floor. This is the primary cause for the infamous rear subframe failure. These fully solid aluminum mounts have absolutely zero flex to them so they will not contribute to rear subframe issues. The Turner E46 Reinforcement Kit is still recommended.

These solid subframe mounts were designed for racing use only, where we won several sports car championships in the Grand-Am Cup series. These subframe mounts are over-engineered to be a major improvement over the stock subframe mounts not only for performance but also in strength as well. The aluminum is CNC machined for a precise fit and minimal weight. One front bushing is slotted to allow for BMW's manufacturing tolerances. Professional and experienced installation is required.

This item fits the following BMWs:
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
2001-2006 SpecE46 BMW 330i 330ci
2003-2008 Z4 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe

Rear Shock Mounts (RSM) - Turner Motorsport Race Monoball - E30, E36, E46, Z3, Z4 (Pair)
Rear Shock Mounts (RSM) - Turner Motorsport Race Monoball - E30, E36...
Want the Ultimate design in a rear shock tower mount? You...
Turner Motorsport - Corporate Logo
T#:2466
Part#: TSU9906SM1
In Stock
Sale - Save 5% $173.95
$165.25
Free Shipping
Sale - Save 5% $173.95
$165.25
Free Shipping
Made in the USA Want the Ultimate design in a rear shock tower mount? You've found it. These rear shock mounts are designed for use on the track and racing. This set of mounts will help your rear shocks perform the best they can in those conditions. The advantage to using a mount with spherical bearing is that it allows the shock to freely move off axis without side loading the shock shaft like rubber or polyurethane mounts do. Side loading a shock increases stiction and wear which decreases its efficiency. Because these are mounts without an isolator (rubber or polyurethane) to dampen road noise and vibrations we do not recommend them for street cars. These were designed in-house and developed for our own track and race cars.

These TMS bearing mounts include both 10mm and 12mm stainless steel bearing sleeves to work with a wide variety of shock shaft pins. The pin is the upper-most portion of the shock where it passes through the mount. If you need a bearing sleeve size other then 10mm or 12mm please contact us.

These rear shock tower mounts fit the following BMWs:
1984-1991 E30 3 series (all) incl. 318i, 318is, 325, 325e, 325es, 325i, 325is
1992-1998 E36 3 series (all) incl. 318i, 318is, 318ti, 325i, 325is, 328i, 328is, 323is
1999-2005 E46 3 series (all) incl. 323i, 323Ci, 325i, 325Ci, 328i, 328Ci, 330i, 330Ci
1988-1991 E30 M3 (all)
1995-1999 E36 M3 coupe, sedan & convertible
2001-2006 E46 M3 (all) incl. coupe & convertible
1996-2002 Z3 Roadster/Coupe including "M"
2003-2008 Z4 Roadster/Coupe including "M"

Rear Subframe Bushings/Mount Set - Turner Solid Delrin/Aluminum - E46, E46 M3
Rear Subframe Bushings/Mount Set - Turner Solid Delrin/Aluminum - E4...
The rear subframe is the heart of the BMW rear suspension...
Turner Motorsport - Corporate Logo
T#:97
Part#: TDR4680001
In Stock
$356.95
Free Shipping
Made in the USA The rear subframe is the heart of the BMW rear suspension. Not only do all of the suspension arms attach to it, the driveline runs through it via the differential and half-shafts. Therefore, a track-prepped E46 should never see any flex or deflection in any of the subframe mounts. Excessive movement here transfers to unwanted suspension motions elsewhere and is also a major contributor to failures in the rear floor sheetmetal.

The rubber stock mounts flex and deflect as various forces are applied throughout the subframe - on and off throttle loading, cornering on flat surfaces, bumpy surfaces, weight transfer, sticky race tires, etc. Too much flex from worn rubber mounts will transfer to flex where the subframe meets the chassis/floor. This is the primary cause for the infamous rear subframe failure. Solid mounts like these have almost zero flex to them so they will not contribute to rear subframe issues. The Turner E46 Reinforcement Kit is still recommended.

These solid subframe mounts were designed for racing use only, where we won several sports car championships in the Grand-Am Cup series. These subframe mounts are over-engineered to be a major improvement over the stock subframe mounts not only for performance but also in strength as well. We use a Delrin casing as the primary bushing in the subframe. CNC machined aluminum sleeves are then pressed into the bushings. The sleeves have larger surface area with integrated washers to provide a more secure fit for holding the subframe in position. One front bushing is slotted to allow for BMW's manufacturing tolerances. Professional and experienced installation is required.

Clickhere for installation instructions.

This item fits the following BMWs:
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
Rear Shock Mounts (RSM) - Repair Shop Lifetime Warranty - E30, E36, E46, Z3, Z4 (Pair)
Rear Shock Mounts (RSM) - Repair Shop Lifetime Warranty - E30, E36, ...
The rear mounts in BMW 3 series fail, no matter what year...
Turner Motorsport - Corporate Logo
T#:338951
Part#: JRDRP
In Stock
Starting at $39.90
Free Shipping on orders $99 and up
The rear mounts in BMW 3 series fail, no matter what year from 1983 to present, that is a weak point of the suspension. Here's the solution. The 3 Series "Repair Shop" Rear Shock Mounts carry a lifetime warranty and will last as long as you own your car. Expect the same comfortable ride you have with factory mounts. These are an inexpensive alternative to expensive factory mounts.

Make this complete by adding the mount gasket and nuts (add the option below).

Rear Control Arm Upper Inner Bushing Set - Turner Race Monoball - E36/E46/X3/Z4
Rear Control Arm Upper Inner Bushing Set - Turner Race Monoball - E3...
TMS rear subframe bearings are designed to limit rear con...
Turner Motorsport - Corporate Logo
T#:3580
Part#: TSU9980006
In Stock
Sale - Save 10% $164.95
$148.45
Free Shipping
Sale - Save 10% $164.95
$148.45
Free Shipping
Made in the USA TMS rear subframe bearings are designed to limit rear control arm movement relative to the subframe. The stock BMW subframe bushings are made out of rubber, which allows variance in suspension position due to deformation and compression. A race car needs to have all suspension points remain in place for proper setup. By using high grade aircraft aluminum alloy and high performance race bearings, the TMS bushing replacements are both lightweight and strong. The casing is designed so that if maximum motion occurs, the load will be evenly distributed throughout the casing. Our flanges are designed to spread the load on the subframe and limit movement. The bearing we use is an extra wide race bearing to distribute the load over a broader area. Each piece is anodized or nickel plated to withstand corrosion. These bushings are a perfect compliment to the TMS lower camber arms.

Click here for installation instructions.

Rear Differential Mounts - Turner Solid Aluminum - E46 M3
Rear Differential Mounts - Turner Solid Aluminum - E46 M3
For our Grand-Am Cup E46 M3s we wanted a fully solid diff...
Turner Motorsport - Corporate Logo
T#:338995
Part#: TDR4680035
In Stock
Starting at $152.95
Free Shipping
Starting at $152.95
Free Shipping
Made in the USA For our Grand-Am Cup E46 M3s we wanted a fully solid differential mount setup. The advantages of a fully-solid aluminum set is that they last forever, quickens response in the suspension, and frees up horsepower to the wheels. These fully solid aluminum diff mounts are CNC machined and lightened for a direct replacement of the original rubber pieces.

By substituting aluminum for rubber we can take out all of the deflection and 'wind up' inherent to the original rubber pieces. The high deflection rate of the stock rubber means the suspension reacts slower as the bushing is compressed. The power used to compress that bushing is instead passed straight to the axles and wheels. And since there is no time lost to deflection, response is greatly improved. These diff mounts are only recommended for racecars since the aluminum transfers more noise and vibration.

This is a 3-piece set with a single front bushing and two rear bushings to press into the cover. They mount with the stock BMW hardware.

This item fits the following BMWs:
2001-2006 E46 BMW M3

Rear Shock Mounts (RSM) - HP Aluminum/Rubber for 12mm Shock Pin - E30, E36, E46, Z3, Z4 (Pair)
Rear Shock Mounts (RSM) - HP Aluminum/Rubber for 12mm Shock Pin - E3...
These rear shock mounts are specifically for use with rea...
Turner Motorsport - Corporate Logo
T#:1531
Part#: TCKRUM12R
Direct Ship
$112.95
$112.95
Made in the USA These rear shock mounts are specifically for use with rear shocks with a 12mm shaft, such as some Koni shocks. They feature anodized aluminum and a heavy duty rubber bushing. Note that the Bilstein Ride-Control B16 kit uses a 12mm shaft (that kit is different than the Bilstein PSS9/PSS10 kits, which use the BMW-standard 10mm shaft).

Front Control Arm Bushings (FCAB) - Delrin Solid Race - E46 M3 (Pair)
Front Control Arm Bushings (FCAB) - Delrin Solid Race - E46 M3 (Pair...
The performance of the front suspension depends almost en...
Turner Motorsport - Corporate Logo
T#:3522
Part#: 31122229623D
Direct Ship
Sale - Save 5% $142.95
$135.80
Sale - Save 5% $142.95
$135.80
The performance of the front suspension depends almost entirely on this one bushing. The BMW front control arm mounts to the chassis with this bushing at the back. If the original rubber has worn it will have a major impact on the alignment, steering, and braking. This is why race teams like ours ditch the factory rubber and put something more solid in its place. The car will be more responsive due to less deflection and the bushings will last longer. These Delrin bushings use an aluminum sleeve and are nearly solid to conform to many racing series rules, including the Grand Am Cup series that we won races and championships in.

This item fits the following BMWs:
2001-2006 E46 BMW M3
Front Control Arm Bushings (FCAB) - Urethane Street - E46 M3 (Pair)
Front Control Arm Bushings (FCAB) - Urethane Street - E46 M3 (Pair) ...
Factory bushings are more than adequate for street drivin...
Turner Motorsport - Corporate Logo
T#:2105
Part#: TMS-FCAB-E46M3
Ships on Mar 12, 2019
Sale - Save 5% $234.95
$223.20
Free Shipping
Sale - Save 5% $234.95
$223.20
Free Shipping

Factory bushings are more than adequate for street driving on the E46 M3. However, once the miles start to pile up, the bushings are meant to be replaced. Common side effects of worn factory FCABs include, but are not limited to the following:

  • Steering wheel shutter when brakes are applied
  • Wheel (and steering wheel) shimmy
  • Mysterious and irregular tire wear
  • "Overboosted" steering feel (very light steering)

Replacing with new factory bushings will return the factory feel. These urethane core bushings, however, offer something MORE. These bushings are designed to deliver performance that surpasses the stock E46 M3 bushing, while still allowing them to be used in everyday driving scenarios on public roads.

With the numerous delrin/urethane/hybrid replacement bushings in the market, we wanted to offer bushings that were not only effective, but simple. No clips, no washers, no multiple sleeves, and no "race parts in street cars". They have an aluminum outer sleeve with a replaceable, compliant urethane core that is serviceable and rebuildable. These urethane inserts prevent unwanted control arm deflection, while allowing noise/vibration/harshness (NVH) isolation -- a must on any bushing being used on a street driven car. And because of their compliance they remain very comfortable for daily use. But because they are a heavier-duty design than stock, these eliminate steering shimmy and wander, especially with the addition of big brake upgrades. They maintain BMW's original suspension geometry, and give your M3 a directly "connected" feeling with the front end of the vehicle. Perhaps best of all, these bushings are easy to install and are designed for longevity. Professional installation on suspension components is always recommended.

Installation Instructions

This item fits the following BMWs:
2001-2006 E46 BMW M3

3-series Rear Suspension Mount Package - Solid Race Bushings - E46 M3
3-series Rear Suspension Mount Package - Solid Race Bushings - E46 M...
Rear Suspension Mounts With No Flex or Deflection for Imp...
Turner Motorsport - Corporate Logo
T#:340200
Part#: TMS11755
Ships on Apr 29, 2019
Sale - Save 8% $459.90
Starting at $422.61
Free Shipping
Sale - Save 8% $459.90
Starting at $422.61
Free Shipping
Rear Suspension Mounts With No Flex or Deflection for Improved Handling, Response, and Long Life
Building a track-only or racecar means swapping out the flexible rubber bushings and mounts for non-distorting solid pieces. The stock rubber bushings have serious drawbacks when used hard on the racetrack - they wear out quickly, and the flexible material allows extreme changes in alignment. Switching to solid bushings will eliminate the deflection and flex, keeping the suspension motions in their intended alignment and providing more feedback to the driver. On the E46 M3, solid bushings can help prevent rear subframe failure as the sheetmetal chassis will no longer flex along with the rubber mount. Depending on the bushing's intended purpose, the material we use is either aluminum or Delrin. Delrin is a dense plastic material that has almost zero deflection and long life. It's self-lubricating so it won't ever need grease or lube. All of our bushings are designed by our in-house R&D engineers and tested on our various racing cars, with many used in professional racing series around the world.

If you're building a car for a racing class, the parts and materials you can change to are specified in the rules. Consult your rulebook or tech steward for any clarification. As these bushings have no play or deflection in them, they are not intended for street-focused cars - they do not absorb impacts and vibration like rubber will.

We offer bushings for the following suspension points -
subframe mounts x 4 (aluminum)
inner-upper control arm bushings x 2 (aluminum with bearing)
differential mounts x 3 (1 Delrin, 2 aluminum)
outer upper/lower control arm bushings x 4 (OE-spec replacements) (steel with bearing)
trailing arm bushings (RTABs) x 2 (aluminum with bearing or Delrin)
suggested: front control arm bushings (FCABs) (Delrin)
suggested: rear shock mounts (RSMs) x 2 (aluminum with bearing)

Notes
Note 1: there is also a inner-lower camber arm bushing. We never developed a solid bushing for this point because every racing class allows adjustable camber arms to be used in this location and we offer those with solid inner bushings.
Note 2: some racing classes require a non-bearing bushing for the rear trailing arm bushings. In cases like this, we use a Delrin bushing.
Note 3: the outer upper and lower bushings are already a monoball-style bearing from the factory on all M3 models. They are a great design and last a long time. We offer them here as direct replacements.

This item fits the following BMWs:
2001-2006 E46 BMW M3 M3 CSL


3-series Rear Suspension Mount Package - Rubber Street Bushings - E46 M3
3-series Rear Suspension Mount Package - Rubber Street Bushings - E4...
This package allows you to build your own rear bushing pa...
Packaged by Turner - Corporate Logo
T#:340199
Part#: TMS2276
In Stock
Starting at $585.33
Free Shipping
Starting at $585.33
Free Shipping

This package allows you to build your own rear bushing package to cover the parts you want to replace. As these cars age, they require a number of suspension bushings to be replaced. Bushing replacement not only keeps the car in its top form, it also makes the car safer. Depending on the work, it may be logical to replace all of the bushings in the rear suspension (there are 19 total). This is especially true if you are pulling the subframe out to do the floor reinforcement or if you're doing a diff install. Turner Motorsport is a big believer in using rubber bushings for street cars (with the exception of solid subframe mounts, see further below). Urethanes, Delrin, or aluminum are generally good for reducing compliance and limiting deflection - attributes that don't really work well on roads filled with potholes, railroad crossings, cracks, and expansion joints. The rubber bushings maintain the factory ride/handling traits that won the M3 praise all over the world. Every bushing will need maintenance or replacement at some point and rubber has proven to last the longest and need less maintenance than anything else, even urethane. And unless competitive driving is your goal, the harder materials are only a gimmick.

Any major overhaul of the rear suspension should include new subframe mounts. The worn rubber mounts contribute to rear subframe-floor failure when the deflection in the mount is transferred to the chassis. Rubber mounts are only OK for street cars that don't see aggressive driving, autocross, or track use. For any enthusiastic driving, we strongly recommend our solid aluminum subframe mounts even on the street. They have zero deflection and will not contribute to rear floor failures. And if you leave rubber in the rest of the suspension your ride comfort will not suffer.

Individual Item Descriptions:

  • Trailing Arm Bushings and Limiters (33322228153 and TSU9990001) - our OEM rubber replacement trailing arm bushings (RTABs) are a perfect fit and help maintain rear toe alignment. The Limiters prevent premature bushing wear.
  • Rear Inner Control Arm Bushings (upper 33321092247 and lower 33326770824) - new stock inner rubber bushings for the upper spring arm and the lower camber arm. These do not wear out very quickly but should be replaced as a 'While you're in there...' job.
  • Rear Outer Control Arm Bushings (upper and lower) (33326775551) - new stock outer ball joints for the upper spring arm and the lower camber arm. These are the standard ball joint design and last a very long time. Check for play with a pry bar and replace as needed.
  • Rear Shock Mounts - Choose from several types of RSM upgrades. If your mounts have not been replaced in the last 40,000 miles, now is the perfect time. Skip this option if you recently replaced mounts or already have an upgraded mount.
  • Differential mounts (33172282484 and 33112282482) - Now is a great time to replace the front rubber-isolated mount. This is another low-wear mount but it can be changed easily, and is a low cost item. The rear mounts are in the aluminum differential cover and BMW only sells them with it. Solid diff mounts are streetable with only a minimal increase in NVH.
  • Rear subframe mounts (33312283573, 33312283574, and 33312283419 x 2) - The heart of the rear suspension, the subframe (or carrier) mounts located the entire rear suspension to the car. There are four mounts in total and bolt up into the rear floor. Worn subframe mounts are one of the leading contributors to rear floor-subframe failure. As the mounts flex, so does the sheetmetal of the chassis, which will fatigue the sheetmetal and crack the spot welds. Therefore, replacement of the subframe mounts is critical and a must when doing the subframe reinforcement or repair. Solid aluminum mounts are streetable with no increase in NVH.

This item fits the following BMWs:
2001-2006 E46 BMW M3 M3 CSL

Shocks and spring Installation Kit - E46 M3 Coupe
Shocks and spring Installation Kit - E46 M3 Coupe
This kit is contains all new strut and shock mounts and h...